From 9643abc9aeca6584f1dd3aa36e96310dac038fb5 Mon Sep 17 00:00:00 2001 From: Grzegorz Bialas Date: Fri, 21 Jan 2022 08:23:31 +0000 Subject: [PATCH] Upgrade to calico_tag=v3.21.2 Additionally, use fixed subnet CIDR for IP_AUTODETECTION_METHOD supported from v3.16.x onwards. Story: 2007256 Task: 42017 Change-Id: Iaa25cd5054cec5482f01d90e2cd150bcd9700dbe --- doc/source/user/index.rst | 2 + .../kubernetes/fragments/calico-service.sh | 4211 +++++++++++++++-- .../fragments/write-heat-params-master.sh | 2 + .../templates/kubecluster.yaml | 1 + .../templates/kubemaster.yaml | 5 + .../templates/kubecluster.yaml | 7 +- .../templates/kubemaster.yaml | 6 + .../notes/calico-3.21.2-193c895134e9c3c1.yaml | 5 + 8 files changed, 3948 insertions(+), 291 deletions(-) create mode 100644 releasenotes/notes/calico-3.21.2-193c895134e9c3c1.yaml diff --git a/doc/source/user/index.rst b/doc/source/user/index.rst index bb79337a06..fa6c3c4a0c 100644 --- a/doc/source/user/index.rst +++ b/doc/source/user/index.rst @@ -2719,6 +2719,8 @@ _`calico_tag` Stein default: v2.6.7 Train default: v3.3.6 Ussuri default: v3.13.1 + Victoria default: v3.13.1 + Wallaby default: v3.13.1 Besides, the Calico network driver needs kube_tag with v1.9.3 or later, because diff --git a/magnum/drivers/common/templates/kubernetes/fragments/calico-service.sh b/magnum/drivers/common/templates/kubernetes/fragments/calico-service.sh index c297c62107..08c204860f 100644 --- a/magnum/drivers/common/templates/kubernetes/fragments/calico-service.sh +++ b/magnum/drivers/common/templates/kubernetes/fragments/calico-service.sh @@ -16,25 +16,3783 @@ if [ "$NETWORK_DRIVER" = "calico" ]; then set +x cat << EOF > ${CALICO_DEPLOY} --- -apiVersion: rbac.authorization.k8s.io/v1 -kind: RoleBinding +# Source: calico/templates/calico-config.yaml +# This ConfigMap is used to configure a self-hosted Calico installation. +kind: ConfigMap +apiVersion: v1 metadata: - name: magnum:podsecuritypolicy:calico - namespace: kube-system - labels: - addonmanager.kubernetes.io/mode: Reconcile - kubernetes.io/cluster-service: "true" -roleRef: - apiGroup: rbac.authorization.k8s.io - kind: ClusterRole - name: magnum:podsecuritypolicy:privileged -subjects: -- kind: ServiceAccount - name: calico-node + name: calico-config namespace: kube-system +data: + # Typha is disabled. + typha_service_name: "none" + # Configure the backend to use. + calico_backend: "bird" + + # Configure the MTU to use for workload interfaces and tunnels. + # By default, MTU is auto-detected, and explicitly setting this field should not be required. + # You can override auto-detection by providing a non-zero value. + veth_mtu: "0" + + # The CNI network configuration to install on each node. The special + # values in this config will be automatically populated. + cni_network_config: |- + { + "name": "k8s-pod-network", + "cniVersion": "0.3.1", + "plugins": [ + { + "type": "calico", + "log_level": "info", + "log_file_path": "/var/log/calico/cni/cni.log", + "datastore_type": "kubernetes", + "nodename": "__KUBERNETES_NODE_NAME__", + "mtu": __CNI_MTU__, + "ipam": { + "type": "calico-ipam" + }, + "policy": { + "type": "k8s" + }, + "kubernetes": { + "kubeconfig": "__KUBECONFIG_FILEPATH__" + } + }, + { + "type": "portmap", + "snat": true, + "capabilities": {"portMappings": true} + }, + { + "type": "bandwidth", + "capabilities": {"bandwidth": true} + } + ] + } + +--- +# Source: calico/templates/kdd-crds.yaml + +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: bgpconfigurations.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: BGPConfiguration + listKind: BGPConfigurationList + plural: bgpconfigurations + singular: bgpconfiguration + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + description: BGPConfiguration contains the configuration for any BGP routing. + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: BGPConfigurationSpec contains the values of the BGP configuration. + properties: + asNumber: + description: 'ASNumber is the default AS number used by a node. [Default: + 64512]' + format: int32 + type: integer + communities: + description: Communities is a list of BGP community values and their + arbitrary names for tagging routes. + items: + description: Community contains standard or large community value + and its name. + properties: + name: + description: Name given to community value. + type: string + value: + description: Value must be of format `aa:nn` or `aa:nn:mm`. + For standard community use `aa:nn` format, where `aa` and + `nn` are 16 bit number. For large community use `aa:nn:mm` + format, where `aa`, `nn` and `mm` are 32 bit number. Where, + `aa` is an AS Number, `nn` and `mm` are per-AS identifier. + pattern: ^(\d+):(\d+)$|^(\d+):(\d+):(\d+)$ + type: string + type: object + type: array + listenPort: + description: ListenPort is the port where BGP protocol should listen. + Defaults to 179 + maximum: 65535 + minimum: 1 + type: integer + logSeverityScreen: + description: 'LogSeverityScreen is the log severity above which logs + are sent to the stdout. [Default: INFO]' + type: string + nodeToNodeMeshEnabled: + description: 'NodeToNodeMeshEnabled sets whether full node to node + BGP mesh is enabled. [Default: true]' + type: boolean + prefixAdvertisements: + description: PrefixAdvertisements contains per-prefix advertisement + configuration. + items: + description: PrefixAdvertisement configures advertisement properties + for the specified CIDR. + properties: + cidr: + description: CIDR for which properties should be advertised. + type: string + communities: + description: Communities can be list of either community names + already defined in `Specs.Communities` or community value + of format `aa:nn` or `aa:nn:mm`. For standard community use + `aa:nn` format, where `aa` and `nn` are 16 bit number. For + large community use `aa:nn:mm` format, where `aa`, `nn` and + `mm` are 32 bit number. Where,`aa` is an AS Number, `nn` and + `mm` are per-AS identifier. + items: + type: string + type: array + type: object + type: array + serviceClusterIPs: + description: ServiceClusterIPs are the CIDR blocks from which service + cluster IPs are allocated. If specified, Calico will advertise these + blocks, as well as any cluster IPs within them. + items: + description: ServiceClusterIPBlock represents a single allowed ClusterIP + CIDR block. + properties: + cidr: + type: string + type: object + type: array + serviceExternalIPs: + description: ServiceExternalIPs are the CIDR blocks for Kubernetes + Service External IPs. Kubernetes Service ExternalIPs will only be + advertised if they are within one of these blocks. + items: + description: ServiceExternalIPBlock represents a single allowed + External IP CIDR block. + properties: + cidr: + type: string + type: object + type: array + serviceLoadBalancerIPs: + description: ServiceLoadBalancerIPs are the CIDR blocks for Kubernetes + Service LoadBalancer IPs. Kubernetes Service status.LoadBalancer.Ingress + IPs will only be advertised if they are within one of these blocks. + items: + description: ServiceLoadBalancerIPBlock represents a single allowed + LoadBalancer IP CIDR block. + properties: + cidr: + type: string + type: object + type: array + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: bgppeers.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: BGPPeer + listKind: BGPPeerList + plural: bgppeers + singular: bgppeer + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: BGPPeerSpec contains the specification for a BGPPeer resource. + properties: + asNumber: + description: The AS Number of the peer. + format: int32 + type: integer + keepOriginalNextHop: + description: Option to keep the original nexthop field when routes + are sent to a BGP Peer. Setting "true" configures the selected BGP + Peers node to use the "next hop keep;" instead of "next hop self;"(default) + in the specific branch of the Node on "bird.cfg". + type: boolean + maxRestartTime: + description: Time to allow for software restart. When specified, + this is configured as the graceful restart timeout. When not specified, + the BIRD default of 120s is used. + type: string + node: + description: The node name identifying the Calico node instance that + is targeted by this peer. If this is not set, and no nodeSelector + is specified, then this BGP peer selects all nodes in the cluster. + type: string + nodeSelector: + description: Selector for the nodes that should have this peering. When + this is set, the Node field must be empty. + type: string + password: + description: Optional BGP password for the peerings generated by this + BGPPeer resource. + properties: + secretKeyRef: + description: Selects a key of a secret in the node pod's namespace. + properties: + key: + description: The key of the secret to select from. Must be + a valid secret key. + type: string + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + optional: + description: Specify whether the Secret or its key must be + defined + type: boolean + required: + - key + type: object + type: object + peerIP: + description: The IP address of the peer followed by an optional port + number to peer with. If port number is given, format should be `[]:port` + or `:` for IPv4. If optional port number is not set, + and this peer IP and ASNumber belongs to a calico/node with ListenPort + set in BGPConfiguration, then we use that port to peer. + type: string + peerSelector: + description: Selector for the remote nodes to peer with. When this + is set, the PeerIP and ASNumber fields must be empty. For each + peering between the local node and selected remote nodes, we configure + an IPv4 peering if both ends have NodeBGPSpec.IPv4Address specified, + and an IPv6 peering if both ends have NodeBGPSpec.IPv6Address specified. The + remote AS number comes from the remote node's NodeBGPSpec.ASNumber, + or the global default if that is not set. + type: string + sourceAddress: + description: Specifies whether and how to configure a source address + for the peerings generated by this BGPPeer resource. Default value + "UseNodeIP" means to configure the node IP as the source address. "None" + means not to configure a source address. + type: string + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: blockaffinities.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: BlockAffinity + listKind: BlockAffinityList + plural: blockaffinities + singular: blockaffinity + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: BlockAffinitySpec contains the specification for a BlockAffinity + resource. + properties: + cidr: + type: string + deleted: + description: Deleted indicates that this block affinity is being deleted. + This field is a string for compatibility with older releases that + mistakenly treat this field as a string. + type: string + node: + type: string + state: + type: string + required: + - cidr + - deleted + - node + - state + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + --- -# Source: calico/templates/rbac.yaml +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + annotations: + controller-gen.kubebuilder.io/version: (devel) + creationTimestamp: null + name: caliconodestatuses.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: CalicoNodeStatus + listKind: CalicoNodeStatusList + plural: caliconodestatuses + singular: caliconodestatus + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: CalicoNodeStatusSpec contains the specification for a CalicoNodeStatus + resource. + properties: + classes: + description: Classes declares the types of information to monitor + for this calico/node, and allows for selective status reporting + about certain subsets of information. + items: + type: string + type: array + node: + description: The node name identifies the Calico node instance for + node status. + type: string + updatePeriodSeconds: + description: UpdatePeriodSeconds is the period at which CalicoNodeStatus + should be updated. Set to 0 to disable CalicoNodeStatus refresh. + Maximum update period is one day. + format: int32 + type: integer + type: object + status: + description: CalicoNodeStatusStatus defines the observed state of CalicoNodeStatus. + No validation needed for status since it is updated by Calico. + properties: + agent: + description: Agent holds agent status on the node. + properties: + birdV4: + description: BIRDV4 represents the latest observed status of bird4. + properties: + lastBootTime: + description: LastBootTime holds the value of lastBootTime + from bird.ctl output. + type: string + lastReconfigurationTime: + description: LastReconfigurationTime holds the value of lastReconfigTime + from bird.ctl output. + type: string + routerID: + description: Router ID used by bird. + type: string + state: + description: The state of the BGP Daemon. + type: string + version: + description: Version of the BGP daemon + type: string + type: object + birdV6: + description: BIRDV6 represents the latest observed status of bird6. + properties: + lastBootTime: + description: LastBootTime holds the value of lastBootTime + from bird.ctl output. + type: string + lastReconfigurationTime: + description: LastReconfigurationTime holds the value of lastReconfigTime + from bird.ctl output. + type: string + routerID: + description: Router ID used by bird. + type: string + state: + description: The state of the BGP Daemon. + type: string + version: + description: Version of the BGP daemon + type: string + type: object + type: object + bgp: + description: BGP holds node BGP status. + properties: + numberEstablishedV4: + description: The total number of IPv4 established bgp sessions. + type: integer + numberEstablishedV6: + description: The total number of IPv6 established bgp sessions. + type: integer + numberNotEstablishedV4: + description: The total number of IPv4 non-established bgp sessions. + type: integer + numberNotEstablishedV6: + description: The total number of IPv6 non-established bgp sessions. + type: integer + peersV4: + description: PeersV4 represents IPv4 BGP peers status on the node. + items: + description: CalicoNodePeer contains the status of BGP peers + on the node. + properties: + peerIP: + description: IP address of the peer whose condition we are + reporting. + type: string + since: + description: Since the state or reason last changed. + type: string + state: + description: State is the BGP session state. + type: string + type: + description: Type indicates whether this peer is configured + via the node-to-node mesh, or via en explicit global or + per-node BGPPeer object. + type: string + type: object + type: array + peersV6: + description: PeersV6 represents IPv6 BGP peers status on the node. + items: + description: CalicoNodePeer contains the status of BGP peers + on the node. + properties: + peerIP: + description: IP address of the peer whose condition we are + reporting. + type: string + since: + description: Since the state or reason last changed. + type: string + state: + description: State is the BGP session state. + type: string + type: + description: Type indicates whether this peer is configured + via the node-to-node mesh, or via en explicit global or + per-node BGPPeer object. + type: string + type: object + type: array + required: + - numberEstablishedV4 + - numberEstablishedV6 + - numberNotEstablishedV4 + - numberNotEstablishedV6 + type: object + lastUpdated: + description: LastUpdated is a timestamp representing the server time + when CalicoNodeStatus object last updated. It is represented in + RFC3339 form and is in UTC. + format: date-time + nullable: true + type: string + routes: + description: Routes reports routes known to the Calico BGP daemon + on the node. + properties: + routesV4: + description: RoutesV4 represents IPv4 routes on the node. + items: + description: CalicoNodeRoute contains the status of BGP routes + on the node. + properties: + destination: + description: Destination of the route. + type: string + gateway: + description: Gateway for the destination. + type: string + interface: + description: Interface for the destination + type: string + learnedFrom: + description: LearnedFrom contains information regarding + where this route originated. + properties: + peerIP: + description: If sourceType is NodeMesh or BGPPeer, IP + address of the router that sent us this route. + type: string + sourceType: + description: Type of the source where a route is learned + from. + type: string + type: object + type: + description: Type indicates if the route is being used for + forwarding or not. + type: string + type: object + type: array + routesV6: + description: RoutesV6 represents IPv6 routes on the node. + items: + description: CalicoNodeRoute contains the status of BGP routes + on the node. + properties: + destination: + description: Destination of the route. + type: string + gateway: + description: Gateway for the destination. + type: string + interface: + description: Interface for the destination + type: string + learnedFrom: + description: LearnedFrom contains information regarding + where this route originated. + properties: + peerIP: + description: If sourceType is NodeMesh or BGPPeer, IP + address of the router that sent us this route. + type: string + sourceType: + description: Type of the source where a route is learned + from. + type: string + type: object + type: + description: Type indicates if the route is being used for + forwarding or not. + type: string + type: object + type: array + type: object + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: clusterinformations.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: ClusterInformation + listKind: ClusterInformationList + plural: clusterinformations + singular: clusterinformation + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + description: ClusterInformation contains the cluster specific information. + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: ClusterInformationSpec contains the values of describing + the cluster. + properties: + calicoVersion: + description: CalicoVersion is the version of Calico that the cluster + is running + type: string + clusterGUID: + description: ClusterGUID is the GUID of the cluster + type: string + clusterType: + description: ClusterType describes the type of the cluster + type: string + datastoreReady: + description: DatastoreReady is used during significant datastore migrations + to signal to components such as Felix that it should wait before + accessing the datastore. + type: boolean + variant: + description: Variant declares which variant of Calico should be active. + type: string + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: felixconfigurations.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: FelixConfiguration + listKind: FelixConfigurationList + plural: felixconfigurations + singular: felixconfiguration + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + description: Felix Configuration contains the configuration for Felix. + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: FelixConfigurationSpec contains the values of the Felix configuration. + properties: + allowIPIPPacketsFromWorkloads: + description: 'AllowIPIPPacketsFromWorkloads controls whether Felix + will add a rule to drop IPIP encapsulated traffic from workloads + [Default: false]' + type: boolean + allowVXLANPacketsFromWorkloads: + description: 'AllowVXLANPacketsFromWorkloads controls whether Felix + will add a rule to drop VXLAN encapsulated traffic from workloads + [Default: false]' + type: boolean + awsSrcDstCheck: + description: 'Set source-destination-check on AWS EC2 instances. Accepted + value must be one of "DoNothing", "Enable" or "Disable". [Default: + DoNothing]' + enum: + - DoNothing + - Enable + - Disable + type: string + bpfConnectTimeLoadBalancingEnabled: + description: 'BPFConnectTimeLoadBalancingEnabled when in BPF mode, + controls whether Felix installs the connection-time load balancer. The + connect-time load balancer is required for the host to be able to + reach Kubernetes services and it improves the performance of pod-to-service + connections. The only reason to disable it is for debugging purposes. [Default: + true]' + type: boolean + bpfDataIfacePattern: + description: BPFDataIfacePattern is a regular expression that controls + which interfaces Felix should attach BPF programs to in order to + catch traffic to/from the network. This needs to match the interfaces + that Calico workload traffic flows over as well as any interfaces + that handle incoming traffic to nodeports and services from outside + the cluster. It should not match the workload interfaces (usually + named cali...). + type: string + bpfDisableUnprivileged: + description: 'BPFDisableUnprivileged, if enabled, Felix sets the kernel.unprivileged_bpf_disabled + sysctl to disable unprivileged use of BPF. This ensures that unprivileged + users cannot access Calico''s BPF maps and cannot insert their own + BPF programs to interfere with Calico''s. [Default: true]' + type: boolean + bpfEnabled: + description: 'BPFEnabled, if enabled Felix will use the BPF dataplane. + [Default: false]' + type: boolean + bpfExtToServiceConnmark: + description: 'BPFExtToServiceConnmark in BPF mode, control a 32bit + mark that is set on connections from an external client to a local + service. This mark allows us to control how packets of that connection + are routed within the host and how is routing intepreted by RPF + check. [Default: 0]' + type: integer + bpfExternalServiceMode: + description: 'BPFExternalServiceMode in BPF mode, controls how connections + from outside the cluster to services (node ports and cluster IPs) + are forwarded to remote workloads. If set to "Tunnel" then both + request and response traffic is tunneled to the remote node. If + set to "DSR", the request traffic is tunneled but the response traffic + is sent directly from the remote node. In "DSR" mode, the remote + node appears to use the IP of the ingress node; this requires a + permissive L2 network. [Default: Tunnel]' + type: string + bpfKubeProxyEndpointSlicesEnabled: + description: BPFKubeProxyEndpointSlicesEnabled in BPF mode, controls + whether Felix's embedded kube-proxy accepts EndpointSlices or not. + type: boolean + bpfKubeProxyIptablesCleanupEnabled: + description: 'BPFKubeProxyIptablesCleanupEnabled, if enabled in BPF + mode, Felix will proactively clean up the upstream Kubernetes kube-proxy''s + iptables chains. Should only be enabled if kube-proxy is not running. [Default: + true]' + type: boolean + bpfKubeProxyMinSyncPeriod: + description: 'BPFKubeProxyMinSyncPeriod, in BPF mode, controls the + minimum time between updates to the dataplane for Felix''s embedded + kube-proxy. Lower values give reduced set-up latency. Higher values + reduce Felix CPU usage by batching up more work. [Default: 1s]' + type: string + bpfLogLevel: + description: 'BPFLogLevel controls the log level of the BPF programs + when in BPF dataplane mode. One of "Off", "Info", or "Debug". The + logs are emitted to the BPF trace pipe, accessible with the command + `tc exec bpf debug`. [Default: Off].' + type: string + chainInsertMode: + description: 'ChainInsertMode controls whether Felix hooks the kernel''s + top-level iptables chains by inserting a rule at the top of the + chain or by appending a rule at the bottom. insert is the safe default + since it prevents Calico''s rules from being bypassed. If you switch + to append mode, be sure that the other rules in the chains signal + acceptance by falling through to the Calico rules, otherwise the + Calico policy will be bypassed. [Default: insert]' + type: string + dataplaneDriver: + type: string + debugDisableLogDropping: + type: boolean + debugMemoryProfilePath: + type: string + debugSimulateCalcGraphHangAfter: + type: string + debugSimulateDataplaneHangAfter: + type: string + defaultEndpointToHostAction: + description: 'DefaultEndpointToHostAction controls what happens to + traffic that goes from a workload endpoint to the host itself (after + the traffic hits the endpoint egress policy). By default Calico + blocks traffic from workload endpoints to the host itself with an + iptables "DROP" action. If you want to allow some or all traffic + from endpoint to host, set this parameter to RETURN or ACCEPT. Use + RETURN if you have your own rules in the iptables "INPUT" chain; + Calico will insert its rules at the top of that chain, then "RETURN" + packets to the "INPUT" chain once it has completed processing workload + endpoint egress policy. Use ACCEPT to unconditionally accept packets + from workloads after processing workload endpoint egress policy. + [Default: Drop]' + type: string + deviceRouteProtocol: + description: This defines the route protocol added to programmed device + routes, by default this will be RTPROT_BOOT when left blank. + type: integer + deviceRouteSourceAddress: + description: This is the source address to use on programmed device + routes. By default the source address is left blank, leaving the + kernel to choose the source address used. + type: string + disableConntrackInvalidCheck: + type: boolean + endpointReportingDelay: + type: string + endpointReportingEnabled: + type: boolean + externalNodesList: + description: ExternalNodesCIDRList is a list of CIDR's of external-non-calico-nodes + which may source tunnel traffic and have the tunneled traffic be + accepted at calico nodes. + items: + type: string + type: array + failsafeInboundHostPorts: + description: 'FailsafeInboundHostPorts is a list of UDP/TCP ports + and CIDRs that Felix will allow incoming traffic to host endpoints + on irrespective of the security policy. This is useful to avoid + accidentally cutting off a host with incorrect configuration. For + back-compatibility, if the protocol is not specified, it defaults + to "tcp". If a CIDR is not specified, it will allow traffic from + all addresses. To disable all inbound host ports, use the value + none. The default value allows ssh access and DHCP. [Default: tcp:22, + udp:68, tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667]' + items: + description: ProtoPort is combination of protocol, port, and CIDR. + Protocol and port must be specified. + properties: + net: + type: string + port: + type: integer + protocol: + type: string + required: + - port + - protocol + type: object + type: array + failsafeOutboundHostPorts: + description: 'FailsafeOutboundHostPorts is a list of UDP/TCP ports + and CIDRs that Felix will allow outgoing traffic from host endpoints + to irrespective of the security policy. This is useful to avoid + accidentally cutting off a host with incorrect configuration. For + back-compatibility, if the protocol is not specified, it defaults + to "tcp". If a CIDR is not specified, it will allow traffic from + all addresses. To disable all outbound host ports, use the value + none. The default value opens etcd''s standard ports to ensure that + Felix does not get cut off from etcd as well as allowing DHCP and + DNS. [Default: tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, + tcp:6667, udp:53, udp:67]' + items: + description: ProtoPort is combination of protocol, port, and CIDR. + Protocol and port must be specified. + properties: + net: + type: string + port: + type: integer + protocol: + type: string + required: + - port + - protocol + type: object + type: array + featureDetectOverride: + description: FeatureDetectOverride is used to override the feature + detection. Values are specified in a comma separated list with no + spaces, example; "SNATFullyRandom=true,MASQFullyRandom=false,RestoreSupportsLock=". + "true" or "false" will force the feature, empty or omitted values + are auto-detected. + type: string + genericXDPEnabled: + description: 'GenericXDPEnabled enables Generic XDP so network cards + that don''t support XDP offload or driver modes can use XDP. This + is not recommended since it doesn''t provide better performance + than iptables. [Default: false]' + type: boolean + healthEnabled: + type: boolean + healthHost: + type: string + healthPort: + type: integer + interfaceExclude: + description: 'InterfaceExclude is a comma-separated list of interfaces + that Felix should exclude when monitoring for host endpoints. The + default value ensures that Felix ignores Kubernetes'' IPVS dummy + interface, which is used internally by kube-proxy. If you want to + exclude multiple interface names using a single value, the list + supports regular expressions. For regular expressions you must wrap + the value with ''/''. For example having values ''/^kube/,veth1'' + will exclude all interfaces that begin with ''kube'' and also the + interface ''veth1''. [Default: kube-ipvs0]' + type: string + interfacePrefix: + description: 'InterfacePrefix is the interface name prefix that identifies + workload endpoints and so distinguishes them from host endpoint + interfaces. Note: in environments other than bare metal, the orchestrators + configure this appropriately. For example our Kubernetes and Docker + integrations set the ''cali'' value, and our OpenStack integration + sets the ''tap'' value. [Default: cali]' + type: string + interfaceRefreshInterval: + description: InterfaceRefreshInterval is the period at which Felix + rescans local interfaces to verify their state. The rescan can be + disabled by setting the interval to 0. + type: string + ipipEnabled: + type: boolean + ipipMTU: + description: 'IPIPMTU is the MTU to set on the tunnel device. See + Configuring MTU [Default: 1440]' + type: integer + ipsetsRefreshInterval: + description: 'IpsetsRefreshInterval is the period at which Felix re-checks + all iptables state to ensure that no other process has accidentally + broken Calico''s rules. Set to 0 to disable iptables refresh. [Default: + 90s]' + type: string + iptablesBackend: + description: IptablesBackend specifies which backend of iptables will + be used. The default is legacy. + type: string + iptablesFilterAllowAction: + type: string + iptablesLockFilePath: + description: 'IptablesLockFilePath is the location of the iptables + lock file. You may need to change this if the lock file is not in + its standard location (for example if you have mapped it into Felix''s + container at a different path). [Default: /run/xtables.lock]' + type: string + iptablesLockProbeInterval: + description: 'IptablesLockProbeInterval is the time that Felix will + wait between attempts to acquire the iptables lock if it is not + available. Lower values make Felix more responsive when the lock + is contended, but use more CPU. [Default: 50ms]' + type: string + iptablesLockTimeout: + description: 'IptablesLockTimeout is the time that Felix will wait + for the iptables lock, or 0, to disable. To use this feature, Felix + must share the iptables lock file with all other processes that + also take the lock. When running Felix inside a container, this + requires the /run directory of the host to be mounted into the calico/node + or calico/felix container. [Default: 0s disabled]' + type: string + iptablesMangleAllowAction: + type: string + iptablesMarkMask: + description: 'IptablesMarkMask is the mask that Felix selects its + IPTables Mark bits from. Should be a 32 bit hexadecimal number with + at least 8 bits set, none of which clash with any other mark bits + in use on the system. [Default: 0xff000000]' + format: int32 + type: integer + iptablesNATOutgoingInterfaceFilter: + type: string + iptablesPostWriteCheckInterval: + description: 'IptablesPostWriteCheckInterval is the period after Felix + has done a write to the dataplane that it schedules an extra read + back in order to check the write was not clobbered by another process. + This should only occur if another application on the system doesn''t + respect the iptables lock. [Default: 1s]' + type: string + iptablesRefreshInterval: + description: 'IptablesRefreshInterval is the period at which Felix + re-checks the IP sets in the dataplane to ensure that no other process + has accidentally broken Calico''s rules. Set to 0 to disable IP + sets refresh. Note: the default for this value is lower than the + other refresh intervals as a workaround for a Linux kernel bug that + was fixed in kernel version 4.11. If you are using v4.11 or greater + you may want to set this to, a higher value to reduce Felix CPU + usage. [Default: 10s]' + type: string + ipv6Support: + type: boolean + kubeNodePortRanges: + description: 'KubeNodePortRanges holds list of port ranges used for + service node ports. Only used if felix detects kube-proxy running + in ipvs mode. Felix uses these ranges to separate host and workload + traffic. [Default: 30000:32767].' + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + logFilePath: + description: 'LogFilePath is the full path to the Felix log. Set to + none to disable file logging. [Default: /var/log/calico/felix.log]' + type: string + logPrefix: + description: 'LogPrefix is the log prefix that Felix uses when rendering + LOG rules. [Default: calico-packet]' + type: string + logSeverityFile: + description: 'LogSeverityFile is the log severity above which logs + are sent to the log file. [Default: Info]' + type: string + logSeverityScreen: + description: 'LogSeverityScreen is the log severity above which logs + are sent to the stdout. [Default: Info]' + type: string + logSeveritySys: + description: 'LogSeveritySys is the log severity above which logs + are sent to the syslog. Set to None for no logging to syslog. [Default: + Info]' + type: string + maxIpsetSize: + type: integer + metadataAddr: + description: 'MetadataAddr is the IP address or domain name of the + server that can answer VM queries for cloud-init metadata. In OpenStack, + this corresponds to the machine running nova-api (or in Ubuntu, + nova-api-metadata). A value of none (case insensitive) means that + Felix should not set up any NAT rule for the metadata path. [Default: + 127.0.0.1]' + type: string + metadataPort: + description: 'MetadataPort is the port of the metadata server. This, + combined with global.MetadataAddr (if not ''None''), is used to + set up a NAT rule, from 169.254.169.254:80 to MetadataAddr:MetadataPort. + In most cases this should not need to be changed [Default: 8775].' + type: integer + mtuIfacePattern: + description: MTUIfacePattern is a regular expression that controls + which interfaces Felix should scan in order to calculate the host's + MTU. This should not match workload interfaces (usually named cali...). + type: string + natOutgoingAddress: + description: NATOutgoingAddress specifies an address to use when performing + source NAT for traffic in a natOutgoing pool that is leaving the + network. By default the address used is an address on the interface + the traffic is leaving on (ie it uses the iptables MASQUERADE target) + type: string + natPortRange: + anyOf: + - type: integer + - type: string + description: NATPortRange specifies the range of ports that is used + for port mapping when doing outgoing NAT. When unset the default + behavior of the network stack is used. + pattern: ^.* + x-kubernetes-int-or-string: true + netlinkTimeout: + type: string + openstackRegion: + description: 'OpenstackRegion is the name of the region that a particular + Felix belongs to. In a multi-region Calico/OpenStack deployment, + this must be configured somehow for each Felix (here in the datamodel, + or in felix.cfg or the environment on each compute node), and must + match the [calico] openstack_region value configured in neutron.conf + on each node. [Default: Empty]' + type: string + policySyncPathPrefix: + description: 'PolicySyncPathPrefix is used to by Felix to communicate + policy changes to external services, like Application layer policy. + [Default: Empty]' + type: string + prometheusGoMetricsEnabled: + description: 'PrometheusGoMetricsEnabled disables Go runtime metrics + collection, which the Prometheus client does by default, when set + to false. This reduces the number of metrics reported, reducing + Prometheus load. [Default: true]' + type: boolean + prometheusMetricsEnabled: + description: 'PrometheusMetricsEnabled enables the Prometheus metrics + server in Felix if set to true. [Default: false]' + type: boolean + prometheusMetricsHost: + description: 'PrometheusMetricsHost is the host that the Prometheus + metrics server should bind to. [Default: empty]' + type: string + prometheusMetricsPort: + description: 'PrometheusMetricsPort is the TCP port that the Prometheus + metrics server should bind to. [Default: 9091]' + type: integer + prometheusProcessMetricsEnabled: + description: 'PrometheusProcessMetricsEnabled disables process metrics + collection, which the Prometheus client does by default, when set + to false. This reduces the number of metrics reported, reducing + Prometheus load. [Default: true]' + type: boolean + prometheusWireGuardMetricsEnabled: + description: 'PrometheusWireGuardMetricsEnabled disables wireguard + metrics collection, which the Prometheus client does by default, + when set to false. This reduces the number of metrics reported, + reducing Prometheus load. [Default: true]' + type: boolean + removeExternalRoutes: + description: Whether or not to remove device routes that have not + been programmed by Felix. Disabling this will allow external applications + to also add device routes. This is enabled by default which means + we will remove externally added routes. + type: boolean + reportingInterval: + description: 'ReportingInterval is the interval at which Felix reports + its status into the datastore or 0 to disable. Must be non-zero + in OpenStack deployments. [Default: 30s]' + type: string + reportingTTL: + description: 'ReportingTTL is the time-to-live setting for process-wide + status reports. [Default: 90s]' + type: string + routeRefreshInterval: + description: 'RouteRefreshInterval is the period at which Felix re-checks + the routes in the dataplane to ensure that no other process has + accidentally broken Calico''s rules. Set to 0 to disable route refresh. + [Default: 90s]' + type: string + routeSource: + description: 'RouteSource configures where Felix gets its routing + information. - WorkloadIPs: use workload endpoints to construct + routes. - CalicoIPAM: the default - use IPAM data to construct routes.' + type: string + routeTableRange: + description: Calico programs additional Linux route tables for various + purposes. RouteTableRange specifies the indices of the route tables + that Calico should use. + properties: + max: + type: integer + min: + type: integer + required: + - max + - min + type: object + serviceLoopPrevention: + description: 'When service IP advertisement is enabled, prevent routing + loops to service IPs that are not in use, by dropping or rejecting + packets that do not get DNAT''d by kube-proxy. Unless set to "Disabled", + in which case such routing loops continue to be allowed. [Default: + Drop]' + type: string + sidecarAccelerationEnabled: + description: 'SidecarAccelerationEnabled enables experimental sidecar + acceleration [Default: false]' + type: boolean + usageReportingEnabled: + description: 'UsageReportingEnabled reports anonymous Calico version + number and cluster size to projectcalico.org. Logs warnings returned + by the usage server. For example, if a significant security vulnerability + has been discovered in the version of Calico being used. [Default: + true]' + type: boolean + usageReportingInitialDelay: + description: 'UsageReportingInitialDelay controls the minimum delay + before Felix makes a report. [Default: 300s]' + type: string + usageReportingInterval: + description: 'UsageReportingInterval controls the interval at which + Felix makes reports. [Default: 86400s]' + type: string + useInternalDataplaneDriver: + type: boolean + vxlanEnabled: + type: boolean + vxlanMTU: + description: 'VXLANMTU is the MTU to set on the tunnel device. See + Configuring MTU [Default: 1440]' + type: integer + vxlanPort: + type: integer + vxlanVNI: + type: integer + wireguardEnabled: + description: 'WireguardEnabled controls whether Wireguard is enabled. + [Default: false]' + type: boolean + wireguardHostEncryptionEnabled: + description: 'WireguardHostEncryptionEnabled controls whether Wireguard + host-to-host encryption is enabled. [Default: false]' + type: boolean + wireguardInterfaceName: + description: 'WireguardInterfaceName specifies the name to use for + the Wireguard interface. [Default: wg.calico]' + type: string + wireguardListeningPort: + description: 'WireguardListeningPort controls the listening port used + by Wireguard. [Default: 51820]' + type: integer + wireguardMTU: + description: 'WireguardMTU controls the MTU on the Wireguard interface. + See Configuring MTU [Default: 1420]' + type: integer + wireguardRoutingRulePriority: + description: 'WireguardRoutingRulePriority controls the priority value + to use for the Wireguard routing rule. [Default: 99]' + type: integer + xdpEnabled: + description: 'XDPEnabled enables XDP acceleration for suitable untracked + incoming deny rules. [Default: true]' + type: boolean + xdpRefreshInterval: + description: 'XDPRefreshInterval is the period at which Felix re-checks + all XDP state to ensure that no other process has accidentally broken + Calico''s BPF maps or attached programs. Set to 0 to disable XDP + refresh. [Default: 90s]' + type: string + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: globalnetworkpolicies.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: GlobalNetworkPolicy + listKind: GlobalNetworkPolicyList + plural: globalnetworkpolicies + singular: globalnetworkpolicy + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + properties: + applyOnForward: + description: ApplyOnForward indicates to apply the rules in this policy + on forward traffic. + type: boolean + doNotTrack: + description: DoNotTrack indicates whether packets matched by the rules + in this policy should go through the data plane's connection tracking, + such as Linux conntrack. If True, the rules in this policy are + applied before any data plane connection tracking, and packets allowed + by this policy are marked as not to be tracked. + type: boolean + egress: + description: The ordered set of egress rules. Each rule contains + a set of packet match criteria and a corresponding action to apply. + items: + description: "A Rule encapsulates a set of match criteria and an + action. Both selector-based security Policy and security Profiles + reference rules - separated out as a list of rules for both ingress + and egress packet matching. \n Each positive match criteria has + a negated version, prefixed with \"Not\". All the match criteria + within a rule must be satisfied for a packet to match. A single + rule can contain the positive and negative version of a match + and both must be satisfied for the rule to match." + properties: + action: + type: string + destination: + description: Destination contains the match criteria that apply + to destination entity. + properties: + namespaceSelector: + description: "NamespaceSelector is an optional field that + contains a selector expression. Only traffic that originates + from (or terminates at) endpoints within the selected + namespaces will be matched. When both NamespaceSelector + and another selector are defined on the same rule, then + only workload endpoints that are matched by both selectors + will be selected by the rule. \n For NetworkPolicy, an + empty NamespaceSelector implies that the Selector is limited + to selecting only workload endpoints in the same namespace + as the NetworkPolicy. \n For NetworkPolicy, `global()` + NamespaceSelector implies that the Selector is limited + to selecting only GlobalNetworkSet or HostEndpoint. \n + For GlobalNetworkPolicy, an empty NamespaceSelector implies + the Selector applies to workload endpoints across all + namespaces." + type: string + nets: + description: Nets is an optional field that restricts the + rule to only apply to traffic that originates from (or + terminates at) IP addresses in any of the given subnets. + items: + type: string + type: array + notNets: + description: NotNets is the negated version of the Nets + field. + items: + type: string + type: array + notPorts: + description: NotPorts is the negated version of the Ports + field. Since only some protocols have ports, if any ports + are specified it requires the Protocol match in the Rule + to be set to "TCP" or "UDP". + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + notSelector: + description: NotSelector is the negated version of the Selector + field. See Selector field for subtleties with negated + selectors. + type: string + ports: + description: "Ports is an optional field that restricts + the rule to only apply to traffic that has a source (destination) + port that matches one of these ranges/values. This value + is a list of integers or strings that represent ranges + of ports. \n Since only some protocols have ports, if + any ports are specified it requires the Protocol match + in the Rule to be set to \"TCP\" or \"UDP\"." + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + selector: + description: "Selector is an optional field that contains + a selector expression (see Policy for sample syntax). + \ Only traffic that originates from (terminates at) endpoints + matching the selector will be matched. \n Note that: in + addition to the negated version of the Selector (see NotSelector + below), the selector expression syntax itself supports + negation. The two types of negation are subtly different. + One negates the set of matched endpoints, the other negates + the whole match: \n \tSelector = \"!has(my_label)\" matches + packets that are from other Calico-controlled \tendpoints + that do not have the label \"my_label\". \n \tNotSelector + = \"has(my_label)\" matches packets that are not from + Calico-controlled \tendpoints that do have the label \"my_label\". + \n The effect is that the latter will accept packets from + non-Calico sources whereas the former is limited to packets + from Calico-controlled endpoints." + type: string + serviceAccounts: + description: ServiceAccounts is an optional field that restricts + the rule to only apply to traffic that originates from + (or terminates at) a pod running as a matching service + account. + properties: + names: + description: Names is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account whose name is in the list. + items: + type: string + type: array + selector: + description: Selector is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account that matches the given label selector. If + both Names and Selector are specified then they are + AND'ed. + type: string + type: object + services: + description: "Services is an optional field that contains + options for matching Kubernetes Services. If specified, + only traffic that originates from or terminates at endpoints + within the selected service(s) will be matched, and only + to/from each endpoint's port. \n Services cannot be specified + on the same rule as Selector, NotSelector, NamespaceSelector, + Nets, NotNets or ServiceAccounts. \n Ports and NotPorts + can only be specified with Services on ingress rules." + properties: + name: + description: Name specifies the name of a Kubernetes + Service to match. + type: string + namespace: + description: Namespace specifies the namespace of the + given Service. If left empty, the rule will match + within this policy's namespace. + type: string + type: object + type: object + http: + description: HTTP contains match criteria that apply to HTTP + requests. + properties: + methods: + description: Methods is an optional field that restricts + the rule to apply only to HTTP requests that use one of + the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple + methods are OR'd together. + items: + type: string + type: array + paths: + description: 'Paths is an optional field that restricts + the rule to apply to HTTP requests that use one of the + listed HTTP Paths. Multiple paths are OR''d together. + e.g: - exact: /foo - prefix: /bar NOTE: Each entry may + ONLY specify either a `exact` or a `prefix` match. The + validator will check for it.' + items: + description: 'HTTPPath specifies an HTTP path to match. + It may be either of the form: exact: : which matches + the path exactly or prefix: : which matches + the path prefix' + properties: + exact: + type: string + prefix: + type: string + type: object + type: array + type: object + icmp: + description: ICMP is an optional field that restricts the rule + to apply to a specific type and code of ICMP traffic. This + should only be specified if the Protocol field is set to "ICMP" + or "ICMPv6". + properties: + code: + description: Match on a specific ICMP code. If specified, + the Type value must also be specified. This is a technical + limitation imposed by the kernel's iptables firewall, + which Calico uses to enforce the rule. + type: integer + type: + description: Match on a specific ICMP type. For example + a value of 8 refers to ICMP Echo Request (i.e. pings). + type: integer + type: object + ipVersion: + description: IPVersion is an optional field that restricts the + rule to only match a specific IP version. + type: integer + metadata: + description: Metadata contains additional information for this + rule + properties: + annotations: + additionalProperties: + type: string + description: Annotations is a set of key value pairs that + give extra information about the rule + type: object + type: object + notICMP: + description: NotICMP is the negated version of the ICMP field. + properties: + code: + description: Match on a specific ICMP code. If specified, + the Type value must also be specified. This is a technical + limitation imposed by the kernel's iptables firewall, + which Calico uses to enforce the rule. + type: integer + type: + description: Match on a specific ICMP type. For example + a value of 8 refers to ICMP Echo Request (i.e. pings). + type: integer + type: object + notProtocol: + anyOf: + - type: integer + - type: string + description: NotProtocol is the negated version of the Protocol + field. + pattern: ^.* + x-kubernetes-int-or-string: true + protocol: + anyOf: + - type: integer + - type: string + description: "Protocol is an optional field that restricts the + rule to only apply to traffic of a specific IP protocol. Required + if any of the EntityRules contain Ports (because ports only + apply to certain protocols). \n Must be one of these string + values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", + \"UDPLite\" or an integer in the range 1-255." + pattern: ^.* + x-kubernetes-int-or-string: true + source: + description: Source contains the match criteria that apply to + source entity. + properties: + namespaceSelector: + description: "NamespaceSelector is an optional field that + contains a selector expression. Only traffic that originates + from (or terminates at) endpoints within the selected + namespaces will be matched. When both NamespaceSelector + and another selector are defined on the same rule, then + only workload endpoints that are matched by both selectors + will be selected by the rule. \n For NetworkPolicy, an + empty NamespaceSelector implies that the Selector is limited + to selecting only workload endpoints in the same namespace + as the NetworkPolicy. \n For NetworkPolicy, `global()` + NamespaceSelector implies that the Selector is limited + to selecting only GlobalNetworkSet or HostEndpoint. \n + For GlobalNetworkPolicy, an empty NamespaceSelector implies + the Selector applies to workload endpoints across all + namespaces." + type: string + nets: + description: Nets is an optional field that restricts the + rule to only apply to traffic that originates from (or + terminates at) IP addresses in any of the given subnets. + items: + type: string + type: array + notNets: + description: NotNets is the negated version of the Nets + field. + items: + type: string + type: array + notPorts: + description: NotPorts is the negated version of the Ports + field. Since only some protocols have ports, if any ports + are specified it requires the Protocol match in the Rule + to be set to "TCP" or "UDP". + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + notSelector: + description: NotSelector is the negated version of the Selector + field. See Selector field for subtleties with negated + selectors. + type: string + ports: + description: "Ports is an optional field that restricts + the rule to only apply to traffic that has a source (destination) + port that matches one of these ranges/values. This value + is a list of integers or strings that represent ranges + of ports. \n Since only some protocols have ports, if + any ports are specified it requires the Protocol match + in the Rule to be set to \"TCP\" or \"UDP\"." + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + selector: + description: "Selector is an optional field that contains + a selector expression (see Policy for sample syntax). + \ Only traffic that originates from (terminates at) endpoints + matching the selector will be matched. \n Note that: in + addition to the negated version of the Selector (see NotSelector + below), the selector expression syntax itself supports + negation. The two types of negation are subtly different. + One negates the set of matched endpoints, the other negates + the whole match: \n \tSelector = \"!has(my_label)\" matches + packets that are from other Calico-controlled \tendpoints + that do not have the label \"my_label\". \n \tNotSelector + = \"has(my_label)\" matches packets that are not from + Calico-controlled \tendpoints that do have the label \"my_label\". + \n The effect is that the latter will accept packets from + non-Calico sources whereas the former is limited to packets + from Calico-controlled endpoints." + type: string + serviceAccounts: + description: ServiceAccounts is an optional field that restricts + the rule to only apply to traffic that originates from + (or terminates at) a pod running as a matching service + account. + properties: + names: + description: Names is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account whose name is in the list. + items: + type: string + type: array + selector: + description: Selector is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account that matches the given label selector. If + both Names and Selector are specified then they are + AND'ed. + type: string + type: object + services: + description: "Services is an optional field that contains + options for matching Kubernetes Services. If specified, + only traffic that originates from or terminates at endpoints + within the selected service(s) will be matched, and only + to/from each endpoint's port. \n Services cannot be specified + on the same rule as Selector, NotSelector, NamespaceSelector, + Nets, NotNets or ServiceAccounts. \n Ports and NotPorts + can only be specified with Services on ingress rules." + properties: + name: + description: Name specifies the name of a Kubernetes + Service to match. + type: string + namespace: + description: Namespace specifies the namespace of the + given Service. If left empty, the rule will match + within this policy's namespace. + type: string + type: object + type: object + required: + - action + type: object + type: array + ingress: + description: The ordered set of ingress rules. Each rule contains + a set of packet match criteria and a corresponding action to apply. + items: + description: "A Rule encapsulates a set of match criteria and an + action. Both selector-based security Policy and security Profiles + reference rules - separated out as a list of rules for both ingress + and egress packet matching. \n Each positive match criteria has + a negated version, prefixed with \"Not\". All the match criteria + within a rule must be satisfied for a packet to match. A single + rule can contain the positive and negative version of a match + and both must be satisfied for the rule to match." + properties: + action: + type: string + destination: + description: Destination contains the match criteria that apply + to destination entity. + properties: + namespaceSelector: + description: "NamespaceSelector is an optional field that + contains a selector expression. Only traffic that originates + from (or terminates at) endpoints within the selected + namespaces will be matched. When both NamespaceSelector + and another selector are defined on the same rule, then + only workload endpoints that are matched by both selectors + will be selected by the rule. \n For NetworkPolicy, an + empty NamespaceSelector implies that the Selector is limited + to selecting only workload endpoints in the same namespace + as the NetworkPolicy. \n For NetworkPolicy, `global()` + NamespaceSelector implies that the Selector is limited + to selecting only GlobalNetworkSet or HostEndpoint. \n + For GlobalNetworkPolicy, an empty NamespaceSelector implies + the Selector applies to workload endpoints across all + namespaces." + type: string + nets: + description: Nets is an optional field that restricts the + rule to only apply to traffic that originates from (or + terminates at) IP addresses in any of the given subnets. + items: + type: string + type: array + notNets: + description: NotNets is the negated version of the Nets + field. + items: + type: string + type: array + notPorts: + description: NotPorts is the negated version of the Ports + field. Since only some protocols have ports, if any ports + are specified it requires the Protocol match in the Rule + to be set to "TCP" or "UDP". + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + notSelector: + description: NotSelector is the negated version of the Selector + field. See Selector field for subtleties with negated + selectors. + type: string + ports: + description: "Ports is an optional field that restricts + the rule to only apply to traffic that has a source (destination) + port that matches one of these ranges/values. This value + is a list of integers or strings that represent ranges + of ports. \n Since only some protocols have ports, if + any ports are specified it requires the Protocol match + in the Rule to be set to \"TCP\" or \"UDP\"." + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + selector: + description: "Selector is an optional field that contains + a selector expression (see Policy for sample syntax). + \ Only traffic that originates from (terminates at) endpoints + matching the selector will be matched. \n Note that: in + addition to the negated version of the Selector (see NotSelector + below), the selector expression syntax itself supports + negation. The two types of negation are subtly different. + One negates the set of matched endpoints, the other negates + the whole match: \n \tSelector = \"!has(my_label)\" matches + packets that are from other Calico-controlled \tendpoints + that do not have the label \"my_label\". \n \tNotSelector + = \"has(my_label)\" matches packets that are not from + Calico-controlled \tendpoints that do have the label \"my_label\". + \n The effect is that the latter will accept packets from + non-Calico sources whereas the former is limited to packets + from Calico-controlled endpoints." + type: string + serviceAccounts: + description: ServiceAccounts is an optional field that restricts + the rule to only apply to traffic that originates from + (or terminates at) a pod running as a matching service + account. + properties: + names: + description: Names is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account whose name is in the list. + items: + type: string + type: array + selector: + description: Selector is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account that matches the given label selector. If + both Names and Selector are specified then they are + AND'ed. + type: string + type: object + services: + description: "Services is an optional field that contains + options for matching Kubernetes Services. If specified, + only traffic that originates from or terminates at endpoints + within the selected service(s) will be matched, and only + to/from each endpoint's port. \n Services cannot be specified + on the same rule as Selector, NotSelector, NamespaceSelector, + Nets, NotNets or ServiceAccounts. \n Ports and NotPorts + can only be specified with Services on ingress rules." + properties: + name: + description: Name specifies the name of a Kubernetes + Service to match. + type: string + namespace: + description: Namespace specifies the namespace of the + given Service. If left empty, the rule will match + within this policy's namespace. + type: string + type: object + type: object + http: + description: HTTP contains match criteria that apply to HTTP + requests. + properties: + methods: + description: Methods is an optional field that restricts + the rule to apply only to HTTP requests that use one of + the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple + methods are OR'd together. + items: + type: string + type: array + paths: + description: 'Paths is an optional field that restricts + the rule to apply to HTTP requests that use one of the + listed HTTP Paths. Multiple paths are OR''d together. + e.g: - exact: /foo - prefix: /bar NOTE: Each entry may + ONLY specify either a `exact` or a `prefix` match. The + validator will check for it.' + items: + description: 'HTTPPath specifies an HTTP path to match. + It may be either of the form: exact: : which matches + the path exactly or prefix: : which matches + the path prefix' + properties: + exact: + type: string + prefix: + type: string + type: object + type: array + type: object + icmp: + description: ICMP is an optional field that restricts the rule + to apply to a specific type and code of ICMP traffic. This + should only be specified if the Protocol field is set to "ICMP" + or "ICMPv6". + properties: + code: + description: Match on a specific ICMP code. If specified, + the Type value must also be specified. This is a technical + limitation imposed by the kernel's iptables firewall, + which Calico uses to enforce the rule. + type: integer + type: + description: Match on a specific ICMP type. For example + a value of 8 refers to ICMP Echo Request (i.e. pings). + type: integer + type: object + ipVersion: + description: IPVersion is an optional field that restricts the + rule to only match a specific IP version. + type: integer + metadata: + description: Metadata contains additional information for this + rule + properties: + annotations: + additionalProperties: + type: string + description: Annotations is a set of key value pairs that + give extra information about the rule + type: object + type: object + notICMP: + description: NotICMP is the negated version of the ICMP field. + properties: + code: + description: Match on a specific ICMP code. If specified, + the Type value must also be specified. This is a technical + limitation imposed by the kernel's iptables firewall, + which Calico uses to enforce the rule. + type: integer + type: + description: Match on a specific ICMP type. For example + a value of 8 refers to ICMP Echo Request (i.e. pings). + type: integer + type: object + notProtocol: + anyOf: + - type: integer + - type: string + description: NotProtocol is the negated version of the Protocol + field. + pattern: ^.* + x-kubernetes-int-or-string: true + protocol: + anyOf: + - type: integer + - type: string + description: "Protocol is an optional field that restricts the + rule to only apply to traffic of a specific IP protocol. Required + if any of the EntityRules contain Ports (because ports only + apply to certain protocols). \n Must be one of these string + values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", + \"UDPLite\" or an integer in the range 1-255." + pattern: ^.* + x-kubernetes-int-or-string: true + source: + description: Source contains the match criteria that apply to + source entity. + properties: + namespaceSelector: + description: "NamespaceSelector is an optional field that + contains a selector expression. Only traffic that originates + from (or terminates at) endpoints within the selected + namespaces will be matched. When both NamespaceSelector + and another selector are defined on the same rule, then + only workload endpoints that are matched by both selectors + will be selected by the rule. \n For NetworkPolicy, an + empty NamespaceSelector implies that the Selector is limited + to selecting only workload endpoints in the same namespace + as the NetworkPolicy. \n For NetworkPolicy, `global()` + NamespaceSelector implies that the Selector is limited + to selecting only GlobalNetworkSet or HostEndpoint. \n + For GlobalNetworkPolicy, an empty NamespaceSelector implies + the Selector applies to workload endpoints across all + namespaces." + type: string + nets: + description: Nets is an optional field that restricts the + rule to only apply to traffic that originates from (or + terminates at) IP addresses in any of the given subnets. + items: + type: string + type: array + notNets: + description: NotNets is the negated version of the Nets + field. + items: + type: string + type: array + notPorts: + description: NotPorts is the negated version of the Ports + field. Since only some protocols have ports, if any ports + are specified it requires the Protocol match in the Rule + to be set to "TCP" or "UDP". + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + notSelector: + description: NotSelector is the negated version of the Selector + field. See Selector field for subtleties with negated + selectors. + type: string + ports: + description: "Ports is an optional field that restricts + the rule to only apply to traffic that has a source (destination) + port that matches one of these ranges/values. This value + is a list of integers or strings that represent ranges + of ports. \n Since only some protocols have ports, if + any ports are specified it requires the Protocol match + in the Rule to be set to \"TCP\" or \"UDP\"." + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + selector: + description: "Selector is an optional field that contains + a selector expression (see Policy for sample syntax). + \ Only traffic that originates from (terminates at) endpoints + matching the selector will be matched. \n Note that: in + addition to the negated version of the Selector (see NotSelector + below), the selector expression syntax itself supports + negation. The two types of negation are subtly different. + One negates the set of matched endpoints, the other negates + the whole match: \n \tSelector = \"!has(my_label)\" matches + packets that are from other Calico-controlled \tendpoints + that do not have the label \"my_label\". \n \tNotSelector + = \"has(my_label)\" matches packets that are not from + Calico-controlled \tendpoints that do have the label \"my_label\". + \n The effect is that the latter will accept packets from + non-Calico sources whereas the former is limited to packets + from Calico-controlled endpoints." + type: string + serviceAccounts: + description: ServiceAccounts is an optional field that restricts + the rule to only apply to traffic that originates from + (or terminates at) a pod running as a matching service + account. + properties: + names: + description: Names is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account whose name is in the list. + items: + type: string + type: array + selector: + description: Selector is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account that matches the given label selector. If + both Names and Selector are specified then they are + AND'ed. + type: string + type: object + services: + description: "Services is an optional field that contains + options for matching Kubernetes Services. If specified, + only traffic that originates from or terminates at endpoints + within the selected service(s) will be matched, and only + to/from each endpoint's port. \n Services cannot be specified + on the same rule as Selector, NotSelector, NamespaceSelector, + Nets, NotNets or ServiceAccounts. \n Ports and NotPorts + can only be specified with Services on ingress rules." + properties: + name: + description: Name specifies the name of a Kubernetes + Service to match. + type: string + namespace: + description: Namespace specifies the namespace of the + given Service. If left empty, the rule will match + within this policy's namespace. + type: string + type: object + type: object + required: + - action + type: object + type: array + namespaceSelector: + description: NamespaceSelector is an optional field for an expression + used to select a pod based on namespaces. + type: string + order: + description: Order is an optional field that specifies the order in + which the policy is applied. Policies with higher "order" are applied + after those with lower order. If the order is omitted, it may be + considered to be "infinite" - i.e. the policy will be applied last. Policies + with identical order will be applied in alphanumerical order based + on the Policy "Name". + type: number + preDNAT: + description: PreDNAT indicates to apply the rules in this policy before + any DNAT. + type: boolean + selector: + description: "The selector is an expression used to pick pick out + the endpoints that the policy should be applied to. \n Selector + expressions follow this syntax: \n \tlabel == \"string_literal\" + \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" + \ -> not equal; also matches if label is not present \tlabel in + { \"a\", \"b\", \"c\", ... } -> true if the value of label X is + one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", + ... } -> true if the value of label X is not one of \"a\", \"b\", + \"c\" \thas(label_name) -> True if that label is present \t! expr + -> negation of expr \texpr && expr -> Short-circuit and \texpr + || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() + or the empty selector -> matches all endpoints. \n Label names are + allowed to contain alphanumerics, -, _ and /. String literals are + more permissive but they do not support escape characters. \n Examples + (with made-up labels): \n \ttype == \"webserver\" && deployment + == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != + \"dev\" \t! has(label_name)" + type: string + serviceAccountSelector: + description: ServiceAccountSelector is an optional field for an expression + used to select a pod based on service accounts. + type: string + types: + description: "Types indicates whether this policy applies to ingress, + or to egress, or to both. When not explicitly specified (and so + the value on creation is empty or nil), Calico defaults Types according + to what Ingress and Egress rules are present in the policy. The + default is: \n - [ PolicyTypeIngress ], if there are no Egress rules + (including the case where there are also no Ingress rules) \n + - [ PolicyTypeEgress ], if there are Egress rules but no Ingress + rules \n - [ PolicyTypeIngress, PolicyTypeEgress ], if there are + both Ingress and Egress rules. \n When the policy is read back again, + Types will always be one of these values, never empty or nil." + items: + description: PolicyType enumerates the possible values of the PolicySpec + Types field. + type: string + type: array + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: globalnetworksets.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: GlobalNetworkSet + listKind: GlobalNetworkSetList + plural: globalnetworksets + singular: globalnetworkset + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + description: GlobalNetworkSet contains a set of arbitrary IP sub-networks/CIDRs + that share labels to allow rules to refer to them via selectors. The labels + of GlobalNetworkSet are not namespaced. + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: GlobalNetworkSetSpec contains the specification for a NetworkSet + resource. + properties: + nets: + description: The list of IP networks that belong to this set. + items: + type: string + type: array + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: hostendpoints.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: HostEndpoint + listKind: HostEndpointList + plural: hostendpoints + singular: hostendpoint + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: HostEndpointSpec contains the specification for a HostEndpoint + resource. + properties: + expectedIPs: + description: "The expected IP addresses (IPv4 and IPv6) of the endpoint. + If \"InterfaceName\" is not present, Calico will look for an interface + matching any of the IPs in the list and apply policy to that. Note: + \tWhen using the selector match criteria in an ingress or egress + security Policy \tor Profile, Calico converts the selector into + a set of IP addresses. For host \tendpoints, the ExpectedIPs field + is used for that purpose. (If only the interface \tname is specified, + Calico does not learn the IPs of the interface for use in match + \tcriteria.)" + items: + type: string + type: array + interfaceName: + description: "Either \"*\", or the name of a specific Linux interface + to apply policy to; or empty. \"*\" indicates that this HostEndpoint + governs all traffic to, from or through the default network namespace + of the host named by the \"Node\" field; entering and leaving that + namespace via any interface, including those from/to non-host-networked + local workloads. \n If InterfaceName is not \"*\", this HostEndpoint + only governs traffic that enters or leaves the host through the + specific interface named by InterfaceName, or - when InterfaceName + is empty - through the specific interface that has one of the IPs + in ExpectedIPs. Therefore, when InterfaceName is empty, at least + one expected IP must be specified. Only external interfaces (such + as \"eth0\") are supported here; it isn't possible for a HostEndpoint + to protect traffic through a specific local workload interface. + \n Note: Only some kinds of policy are implemented for \"*\" HostEndpoints; + initially just pre-DNAT policy. Please check Calico documentation + for the latest position." + type: string + node: + description: The node name identifying the Calico node instance. + type: string + ports: + description: Ports contains the endpoint's named ports, which may + be referenced in security policy rules. + items: + properties: + name: + type: string + port: + type: integer + protocol: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + required: + - name + - port + - protocol + type: object + type: array + profiles: + description: A list of identifiers of security Profile objects that + apply to this endpoint. Each profile is applied in the order that + they appear in this list. Profile rules are applied after the selector-based + security policy. + items: + type: string + type: array + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: ipamblocks.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: IPAMBlock + listKind: IPAMBlockList + plural: ipamblocks + singular: ipamblock + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: IPAMBlockSpec contains the specification for an IPAMBlock + resource. + properties: + affinity: + type: string + allocations: + items: + type: integer + # TODO: This nullable is manually added in. We should update controller-gen + # to handle []*int properly itself. + nullable: true + type: array + attributes: + items: + properties: + handle_id: + type: string + secondary: + additionalProperties: + type: string + type: object + type: object + type: array + cidr: + type: string + deleted: + type: boolean + strictAffinity: + type: boolean + unallocated: + items: + type: integer + type: array + required: + - allocations + - attributes + - cidr + - strictAffinity + - unallocated + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: ipamconfigs.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: IPAMConfig + listKind: IPAMConfigList + plural: ipamconfigs + singular: ipamconfig + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: IPAMConfigSpec contains the specification for an IPAMConfig + resource. + properties: + autoAllocateBlocks: + type: boolean + maxBlocksPerHost: + description: MaxBlocksPerHost, if non-zero, is the max number of blocks + that can be affine to each host. + type: integer + strictAffinity: + type: boolean + required: + - autoAllocateBlocks + - strictAffinity + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: ipamhandles.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: IPAMHandle + listKind: IPAMHandleList + plural: ipamhandles + singular: ipamhandle + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: IPAMHandleSpec contains the specification for an IPAMHandle + resource. + properties: + block: + additionalProperties: + type: integer + type: object + deleted: + type: boolean + handleID: + type: string + required: + - block + - handleID + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: ippools.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: IPPool + listKind: IPPoolList + plural: ippools + singular: ippool + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: IPPoolSpec contains the specification for an IPPool resource. + properties: + allowedUses: + description: AllowedUse controls what the IP pool will be used for. If + not specified or empty, defaults to ["Tunnel", "Workload"] for back-compatibility + items: + type: string + type: array + blockSize: + description: The block size to use for IP address assignments from + this pool. Defaults to 26 for IPv4 and 112 for IPv6. + type: integer + cidr: + description: The pool CIDR. + type: string + disabled: + description: When disabled is true, Calico IPAM will not assign addresses + from this pool. + type: boolean + disableBGPExport: + description: 'Disable exporting routes from this IP Pool’s CIDR over + BGP. [Default: false]' + type: boolean + ipip: + description: 'Deprecated: this field is only used for APIv1 backwards + compatibility. Setting this field is not allowed, this field is + for internal use only.' + properties: + enabled: + description: When enabled is true, ipip tunneling will be used + to deliver packets to destinations within this pool. + type: boolean + mode: + description: The IPIP mode. This can be one of "always" or "cross-subnet". A + mode of "always" will also use IPIP tunneling for routing to + destination IP addresses within this pool. A mode of "cross-subnet" + will only use IPIP tunneling when the destination node is on + a different subnet to the originating node. The default value + (if not specified) is "always". + type: string + type: object + ipipMode: + description: Contains configuration for IPIP tunneling for this pool. + If not specified, then this is defaulted to "Never" (i.e. IPIP tunneling + is disabled). + type: string + nat-outgoing: + description: 'Deprecated: this field is only used for APIv1 backwards + compatibility. Setting this field is not allowed, this field is + for internal use only.' + type: boolean + natOutgoing: + description: When nat-outgoing is true, packets sent from Calico networked + containers in this pool to destinations outside of this pool will + be masqueraded. + type: boolean + nodeSelector: + description: Allows IPPool to allocate for a specific node by label + selector. + type: string + vxlanMode: + description: Contains configuration for VXLAN tunneling for this pool. + If not specified, then this is defaulted to "Never" (i.e. VXLAN + tunneling is disabled). + type: string + required: + - cidr + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: ipreservations.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: IPReservation + listKind: IPReservationList + plural: ipreservations + singular: ipreservation + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: IPReservationSpec contains the specification for an IPReservation + resource. + properties: + reservedCIDRs: + description: ReservedCIDRs is a list of CIDRs and/or IP addresses + that Calico IPAM will exclude from new allocations. + items: + type: string + type: array + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: kubecontrollersconfigurations.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: KubeControllersConfiguration + listKind: KubeControllersConfigurationList + plural: kubecontrollersconfigurations + singular: kubecontrollersconfiguration + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: KubeControllersConfigurationSpec contains the values of the + Kubernetes controllers configuration. + properties: + controllers: + description: Controllers enables and configures individual Kubernetes + controllers + properties: + namespace: + description: Namespace enables and configures the namespace controller. + Enabled by default, set to nil to disable. + properties: + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform reconciliation + with the Calico datastore. [Default: 5m]' + type: string + type: object + node: + description: Node enables and configures the node controller. + Enabled by default, set to nil to disable. + properties: + hostEndpoint: + description: HostEndpoint controls syncing nodes to host endpoints. + Disabled by default, set to nil to disable. + properties: + autoCreate: + description: 'AutoCreate enables automatic creation of + host endpoints for every node. [Default: Disabled]' + type: string + type: object + leakGracePeriod: + description: 'LeakGracePeriod is the period used by the controller + to determine if an IP address has been leaked. Set to 0 + to disable IP garbage collection. [Default: 15m]' + type: string + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform reconciliation + with the Calico datastore. [Default: 5m]' + type: string + syncLabels: + description: 'SyncLabels controls whether to copy Kubernetes + node labels to Calico nodes. [Default: Enabled]' + type: string + type: object + policy: + description: Policy enables and configures the policy controller. + Enabled by default, set to nil to disable. + properties: + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform reconciliation + with the Calico datastore. [Default: 5m]' + type: string + type: object + serviceAccount: + description: ServiceAccount enables and configures the service + account controller. Enabled by default, set to nil to disable. + properties: + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform reconciliation + with the Calico datastore. [Default: 5m]' + type: string + type: object + workloadEndpoint: + description: WorkloadEndpoint enables and configures the workload + endpoint controller. Enabled by default, set to nil to disable. + properties: + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform reconciliation + with the Calico datastore. [Default: 5m]' + type: string + type: object + type: object + etcdV3CompactionPeriod: + description: 'EtcdV3CompactionPeriod is the period between etcdv3 + compaction requests. Set to 0 to disable. [Default: 10m]' + type: string + healthChecks: + description: 'HealthChecks enables or disables support for health + checks [Default: Enabled]' + type: string + logSeverityScreen: + description: 'LogSeverityScreen is the log severity above which logs + are sent to the stdout. [Default: Info]' + type: string + prometheusMetricsPort: + description: 'PrometheusMetricsPort is the TCP port that the Prometheus + metrics server should bind to. Set to 0 to disable. [Default: 9094]' + type: integer + required: + - controllers + type: object + status: + description: KubeControllersConfigurationStatus represents the status + of the configuration. It's useful for admins to be able to see the actual + config that was applied, which can be modified by environment variables + on the kube-controllers process. + properties: + environmentVars: + additionalProperties: + type: string + description: EnvironmentVars contains the environment variables on + the kube-controllers that influenced the RunningConfig. + type: object + runningConfig: + description: RunningConfig contains the effective config that is running + in the kube-controllers pod, after merging the API resource with + any environment variables. + properties: + controllers: + description: Controllers enables and configures individual Kubernetes + controllers + properties: + namespace: + description: Namespace enables and configures the namespace + controller. Enabled by default, set to nil to disable. + properties: + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform + reconciliation with the Calico datastore. [Default: + 5m]' + type: string + type: object + node: + description: Node enables and configures the node controller. + Enabled by default, set to nil to disable. + properties: + hostEndpoint: + description: HostEndpoint controls syncing nodes to host + endpoints. Disabled by default, set to nil to disable. + properties: + autoCreate: + description: 'AutoCreate enables automatic creation + of host endpoints for every node. [Default: Disabled]' + type: string + type: object + leakGracePeriod: + description: 'LeakGracePeriod is the period used by the + controller to determine if an IP address has been leaked. + Set to 0 to disable IP garbage collection. [Default: + 15m]' + type: string + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform + reconciliation with the Calico datastore. [Default: + 5m]' + type: string + syncLabels: + description: 'SyncLabels controls whether to copy Kubernetes + node labels to Calico nodes. [Default: Enabled]' + type: string + type: object + policy: + description: Policy enables and configures the policy controller. + Enabled by default, set to nil to disable. + properties: + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform + reconciliation with the Calico datastore. [Default: + 5m]' + type: string + type: object + serviceAccount: + description: ServiceAccount enables and configures the service + account controller. Enabled by default, set to nil to disable. + properties: + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform + reconciliation with the Calico datastore. [Default: + 5m]' + type: string + type: object + workloadEndpoint: + description: WorkloadEndpoint enables and configures the workload + endpoint controller. Enabled by default, set to nil to disable. + properties: + reconcilerPeriod: + description: 'ReconcilerPeriod is the period to perform + reconciliation with the Calico datastore. [Default: + 5m]' + type: string + type: object + type: object + etcdV3CompactionPeriod: + description: 'EtcdV3CompactionPeriod is the period between etcdv3 + compaction requests. Set to 0 to disable. [Default: 10m]' + type: string + healthChecks: + description: 'HealthChecks enables or disables support for health + checks [Default: Enabled]' + type: string + logSeverityScreen: + description: 'LogSeverityScreen is the log severity above which + logs are sent to the stdout. [Default: Info]' + type: string + prometheusMetricsPort: + description: 'PrometheusMetricsPort is the TCP port that the Prometheus + metrics server should bind to. Set to 0 to disable. [Default: + 9094]' + type: integer + required: + - controllers + type: object + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: networkpolicies.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: NetworkPolicy + listKind: NetworkPolicyList + plural: networkpolicies + singular: networkpolicy + scope: Namespaced + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + properties: + egress: + description: The ordered set of egress rules. Each rule contains + a set of packet match criteria and a corresponding action to apply. + items: + description: "A Rule encapsulates a set of match criteria and an + action. Both selector-based security Policy and security Profiles + reference rules - separated out as a list of rules for both ingress + and egress packet matching. \n Each positive match criteria has + a negated version, prefixed with \"Not\". All the match criteria + within a rule must be satisfied for a packet to match. A single + rule can contain the positive and negative version of a match + and both must be satisfied for the rule to match." + properties: + action: + type: string + destination: + description: Destination contains the match criteria that apply + to destination entity. + properties: + namespaceSelector: + description: "NamespaceSelector is an optional field that + contains a selector expression. Only traffic that originates + from (or terminates at) endpoints within the selected + namespaces will be matched. When both NamespaceSelector + and another selector are defined on the same rule, then + only workload endpoints that are matched by both selectors + will be selected by the rule. \n For NetworkPolicy, an + empty NamespaceSelector implies that the Selector is limited + to selecting only workload endpoints in the same namespace + as the NetworkPolicy. \n For NetworkPolicy, `global()` + NamespaceSelector implies that the Selector is limited + to selecting only GlobalNetworkSet or HostEndpoint. \n + For GlobalNetworkPolicy, an empty NamespaceSelector implies + the Selector applies to workload endpoints across all + namespaces." + type: string + nets: + description: Nets is an optional field that restricts the + rule to only apply to traffic that originates from (or + terminates at) IP addresses in any of the given subnets. + items: + type: string + type: array + notNets: + description: NotNets is the negated version of the Nets + field. + items: + type: string + type: array + notPorts: + description: NotPorts is the negated version of the Ports + field. Since only some protocols have ports, if any ports + are specified it requires the Protocol match in the Rule + to be set to "TCP" or "UDP". + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + notSelector: + description: NotSelector is the negated version of the Selector + field. See Selector field for subtleties with negated + selectors. + type: string + ports: + description: "Ports is an optional field that restricts + the rule to only apply to traffic that has a source (destination) + port that matches one of these ranges/values. This value + is a list of integers or strings that represent ranges + of ports. \n Since only some protocols have ports, if + any ports are specified it requires the Protocol match + in the Rule to be set to \"TCP\" or \"UDP\"." + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + selector: + description: "Selector is an optional field that contains + a selector expression (see Policy for sample syntax). + \ Only traffic that originates from (terminates at) endpoints + matching the selector will be matched. \n Note that: in + addition to the negated version of the Selector (see NotSelector + below), the selector expression syntax itself supports + negation. The two types of negation are subtly different. + One negates the set of matched endpoints, the other negates + the whole match: \n \tSelector = \"!has(my_label)\" matches + packets that are from other Calico-controlled \tendpoints + that do not have the label \"my_label\". \n \tNotSelector + = \"has(my_label)\" matches packets that are not from + Calico-controlled \tendpoints that do have the label \"my_label\". + \n The effect is that the latter will accept packets from + non-Calico sources whereas the former is limited to packets + from Calico-controlled endpoints." + type: string + serviceAccounts: + description: ServiceAccounts is an optional field that restricts + the rule to only apply to traffic that originates from + (or terminates at) a pod running as a matching service + account. + properties: + names: + description: Names is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account whose name is in the list. + items: + type: string + type: array + selector: + description: Selector is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account that matches the given label selector. If + both Names and Selector are specified then they are + AND'ed. + type: string + type: object + services: + description: "Services is an optional field that contains + options for matching Kubernetes Services. If specified, + only traffic that originates from or terminates at endpoints + within the selected service(s) will be matched, and only + to/from each endpoint's port. \n Services cannot be specified + on the same rule as Selector, NotSelector, NamespaceSelector, + Nets, NotNets or ServiceAccounts. \n Ports and NotPorts + can only be specified with Services on ingress rules." + properties: + name: + description: Name specifies the name of a Kubernetes + Service to match. + type: string + namespace: + description: Namespace specifies the namespace of the + given Service. If left empty, the rule will match + within this policy's namespace. + type: string + type: object + type: object + http: + description: HTTP contains match criteria that apply to HTTP + requests. + properties: + methods: + description: Methods is an optional field that restricts + the rule to apply only to HTTP requests that use one of + the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple + methods are OR'd together. + items: + type: string + type: array + paths: + description: 'Paths is an optional field that restricts + the rule to apply to HTTP requests that use one of the + listed HTTP Paths. Multiple paths are OR''d together. + e.g: - exact: /foo - prefix: /bar NOTE: Each entry may + ONLY specify either a `exact` or a `prefix` match. The + validator will check for it.' + items: + description: 'HTTPPath specifies an HTTP path to match. + It may be either of the form: exact: : which matches + the path exactly or prefix: : which matches + the path prefix' + properties: + exact: + type: string + prefix: + type: string + type: object + type: array + type: object + icmp: + description: ICMP is an optional field that restricts the rule + to apply to a specific type and code of ICMP traffic. This + should only be specified if the Protocol field is set to "ICMP" + or "ICMPv6". + properties: + code: + description: Match on a specific ICMP code. If specified, + the Type value must also be specified. This is a technical + limitation imposed by the kernel's iptables firewall, + which Calico uses to enforce the rule. + type: integer + type: + description: Match on a specific ICMP type. For example + a value of 8 refers to ICMP Echo Request (i.e. pings). + type: integer + type: object + ipVersion: + description: IPVersion is an optional field that restricts the + rule to only match a specific IP version. + type: integer + metadata: + description: Metadata contains additional information for this + rule + properties: + annotations: + additionalProperties: + type: string + description: Annotations is a set of key value pairs that + give extra information about the rule + type: object + type: object + notICMP: + description: NotICMP is the negated version of the ICMP field. + properties: + code: + description: Match on a specific ICMP code. If specified, + the Type value must also be specified. This is a technical + limitation imposed by the kernel's iptables firewall, + which Calico uses to enforce the rule. + type: integer + type: + description: Match on a specific ICMP type. For example + a value of 8 refers to ICMP Echo Request (i.e. pings). + type: integer + type: object + notProtocol: + anyOf: + - type: integer + - type: string + description: NotProtocol is the negated version of the Protocol + field. + pattern: ^.* + x-kubernetes-int-or-string: true + protocol: + anyOf: + - type: integer + - type: string + description: "Protocol is an optional field that restricts the + rule to only apply to traffic of a specific IP protocol. Required + if any of the EntityRules contain Ports (because ports only + apply to certain protocols). \n Must be one of these string + values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", + \"UDPLite\" or an integer in the range 1-255." + pattern: ^.* + x-kubernetes-int-or-string: true + source: + description: Source contains the match criteria that apply to + source entity. + properties: + namespaceSelector: + description: "NamespaceSelector is an optional field that + contains a selector expression. Only traffic that originates + from (or terminates at) endpoints within the selected + namespaces will be matched. When both NamespaceSelector + and another selector are defined on the same rule, then + only workload endpoints that are matched by both selectors + will be selected by the rule. \n For NetworkPolicy, an + empty NamespaceSelector implies that the Selector is limited + to selecting only workload endpoints in the same namespace + as the NetworkPolicy. \n For NetworkPolicy, `global()` + NamespaceSelector implies that the Selector is limited + to selecting only GlobalNetworkSet or HostEndpoint. \n + For GlobalNetworkPolicy, an empty NamespaceSelector implies + the Selector applies to workload endpoints across all + namespaces." + type: string + nets: + description: Nets is an optional field that restricts the + rule to only apply to traffic that originates from (or + terminates at) IP addresses in any of the given subnets. + items: + type: string + type: array + notNets: + description: NotNets is the negated version of the Nets + field. + items: + type: string + type: array + notPorts: + description: NotPorts is the negated version of the Ports + field. Since only some protocols have ports, if any ports + are specified it requires the Protocol match in the Rule + to be set to "TCP" or "UDP". + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + notSelector: + description: NotSelector is the negated version of the Selector + field. See Selector field for subtleties with negated + selectors. + type: string + ports: + description: "Ports is an optional field that restricts + the rule to only apply to traffic that has a source (destination) + port that matches one of these ranges/values. This value + is a list of integers or strings that represent ranges + of ports. \n Since only some protocols have ports, if + any ports are specified it requires the Protocol match + in the Rule to be set to \"TCP\" or \"UDP\"." + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + selector: + description: "Selector is an optional field that contains + a selector expression (see Policy for sample syntax). + \ Only traffic that originates from (terminates at) endpoints + matching the selector will be matched. \n Note that: in + addition to the negated version of the Selector (see NotSelector + below), the selector expression syntax itself supports + negation. The two types of negation are subtly different. + One negates the set of matched endpoints, the other negates + the whole match: \n \tSelector = \"!has(my_label)\" matches + packets that are from other Calico-controlled \tendpoints + that do not have the label \"my_label\". \n \tNotSelector + = \"has(my_label)\" matches packets that are not from + Calico-controlled \tendpoints that do have the label \"my_label\". + \n The effect is that the latter will accept packets from + non-Calico sources whereas the former is limited to packets + from Calico-controlled endpoints." + type: string + serviceAccounts: + description: ServiceAccounts is an optional field that restricts + the rule to only apply to traffic that originates from + (or terminates at) a pod running as a matching service + account. + properties: + names: + description: Names is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account whose name is in the list. + items: + type: string + type: array + selector: + description: Selector is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account that matches the given label selector. If + both Names and Selector are specified then they are + AND'ed. + type: string + type: object + services: + description: "Services is an optional field that contains + options for matching Kubernetes Services. If specified, + only traffic that originates from or terminates at endpoints + within the selected service(s) will be matched, and only + to/from each endpoint's port. \n Services cannot be specified + on the same rule as Selector, NotSelector, NamespaceSelector, + Nets, NotNets or ServiceAccounts. \n Ports and NotPorts + can only be specified with Services on ingress rules." + properties: + name: + description: Name specifies the name of a Kubernetes + Service to match. + type: string + namespace: + description: Namespace specifies the namespace of the + given Service. If left empty, the rule will match + within this policy's namespace. + type: string + type: object + type: object + required: + - action + type: object + type: array + ingress: + description: The ordered set of ingress rules. Each rule contains + a set of packet match criteria and a corresponding action to apply. + items: + description: "A Rule encapsulates a set of match criteria and an + action. Both selector-based security Policy and security Profiles + reference rules - separated out as a list of rules for both ingress + and egress packet matching. \n Each positive match criteria has + a negated version, prefixed with \"Not\". All the match criteria + within a rule must be satisfied for a packet to match. A single + rule can contain the positive and negative version of a match + and both must be satisfied for the rule to match." + properties: + action: + type: string + destination: + description: Destination contains the match criteria that apply + to destination entity. + properties: + namespaceSelector: + description: "NamespaceSelector is an optional field that + contains a selector expression. Only traffic that originates + from (or terminates at) endpoints within the selected + namespaces will be matched. When both NamespaceSelector + and another selector are defined on the same rule, then + only workload endpoints that are matched by both selectors + will be selected by the rule. \n For NetworkPolicy, an + empty NamespaceSelector implies that the Selector is limited + to selecting only workload endpoints in the same namespace + as the NetworkPolicy. \n For NetworkPolicy, `global()` + NamespaceSelector implies that the Selector is limited + to selecting only GlobalNetworkSet or HostEndpoint. \n + For GlobalNetworkPolicy, an empty NamespaceSelector implies + the Selector applies to workload endpoints across all + namespaces." + type: string + nets: + description: Nets is an optional field that restricts the + rule to only apply to traffic that originates from (or + terminates at) IP addresses in any of the given subnets. + items: + type: string + type: array + notNets: + description: NotNets is the negated version of the Nets + field. + items: + type: string + type: array + notPorts: + description: NotPorts is the negated version of the Ports + field. Since only some protocols have ports, if any ports + are specified it requires the Protocol match in the Rule + to be set to "TCP" or "UDP". + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + notSelector: + description: NotSelector is the negated version of the Selector + field. See Selector field for subtleties with negated + selectors. + type: string + ports: + description: "Ports is an optional field that restricts + the rule to only apply to traffic that has a source (destination) + port that matches one of these ranges/values. This value + is a list of integers or strings that represent ranges + of ports. \n Since only some protocols have ports, if + any ports are specified it requires the Protocol match + in the Rule to be set to \"TCP\" or \"UDP\"." + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + selector: + description: "Selector is an optional field that contains + a selector expression (see Policy for sample syntax). + \ Only traffic that originates from (terminates at) endpoints + matching the selector will be matched. \n Note that: in + addition to the negated version of the Selector (see NotSelector + below), the selector expression syntax itself supports + negation. The two types of negation are subtly different. + One negates the set of matched endpoints, the other negates + the whole match: \n \tSelector = \"!has(my_label)\" matches + packets that are from other Calico-controlled \tendpoints + that do not have the label \"my_label\". \n \tNotSelector + = \"has(my_label)\" matches packets that are not from + Calico-controlled \tendpoints that do have the label \"my_label\". + \n The effect is that the latter will accept packets from + non-Calico sources whereas the former is limited to packets + from Calico-controlled endpoints." + type: string + serviceAccounts: + description: ServiceAccounts is an optional field that restricts + the rule to only apply to traffic that originates from + (or terminates at) a pod running as a matching service + account. + properties: + names: + description: Names is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account whose name is in the list. + items: + type: string + type: array + selector: + description: Selector is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account that matches the given label selector. If + both Names and Selector are specified then they are + AND'ed. + type: string + type: object + services: + description: "Services is an optional field that contains + options for matching Kubernetes Services. If specified, + only traffic that originates from or terminates at endpoints + within the selected service(s) will be matched, and only + to/from each endpoint's port. \n Services cannot be specified + on the same rule as Selector, NotSelector, NamespaceSelector, + Nets, NotNets or ServiceAccounts. \n Ports and NotPorts + can only be specified with Services on ingress rules." + properties: + name: + description: Name specifies the name of a Kubernetes + Service to match. + type: string + namespace: + description: Namespace specifies the namespace of the + given Service. If left empty, the rule will match + within this policy's namespace. + type: string + type: object + type: object + http: + description: HTTP contains match criteria that apply to HTTP + requests. + properties: + methods: + description: Methods is an optional field that restricts + the rule to apply only to HTTP requests that use one of + the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple + methods are OR'd together. + items: + type: string + type: array + paths: + description: 'Paths is an optional field that restricts + the rule to apply to HTTP requests that use one of the + listed HTTP Paths. Multiple paths are OR''d together. + e.g: - exact: /foo - prefix: /bar NOTE: Each entry may + ONLY specify either a `exact` or a `prefix` match. The + validator will check for it.' + items: + description: 'HTTPPath specifies an HTTP path to match. + It may be either of the form: exact: : which matches + the path exactly or prefix: : which matches + the path prefix' + properties: + exact: + type: string + prefix: + type: string + type: object + type: array + type: object + icmp: + description: ICMP is an optional field that restricts the rule + to apply to a specific type and code of ICMP traffic. This + should only be specified if the Protocol field is set to "ICMP" + or "ICMPv6". + properties: + code: + description: Match on a specific ICMP code. If specified, + the Type value must also be specified. This is a technical + limitation imposed by the kernel's iptables firewall, + which Calico uses to enforce the rule. + type: integer + type: + description: Match on a specific ICMP type. For example + a value of 8 refers to ICMP Echo Request (i.e. pings). + type: integer + type: object + ipVersion: + description: IPVersion is an optional field that restricts the + rule to only match a specific IP version. + type: integer + metadata: + description: Metadata contains additional information for this + rule + properties: + annotations: + additionalProperties: + type: string + description: Annotations is a set of key value pairs that + give extra information about the rule + type: object + type: object + notICMP: + description: NotICMP is the negated version of the ICMP field. + properties: + code: + description: Match on a specific ICMP code. If specified, + the Type value must also be specified. This is a technical + limitation imposed by the kernel's iptables firewall, + which Calico uses to enforce the rule. + type: integer + type: + description: Match on a specific ICMP type. For example + a value of 8 refers to ICMP Echo Request (i.e. pings). + type: integer + type: object + notProtocol: + anyOf: + - type: integer + - type: string + description: NotProtocol is the negated version of the Protocol + field. + pattern: ^.* + x-kubernetes-int-or-string: true + protocol: + anyOf: + - type: integer + - type: string + description: "Protocol is an optional field that restricts the + rule to only apply to traffic of a specific IP protocol. Required + if any of the EntityRules contain Ports (because ports only + apply to certain protocols). \n Must be one of these string + values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", + \"UDPLite\" or an integer in the range 1-255." + pattern: ^.* + x-kubernetes-int-or-string: true + source: + description: Source contains the match criteria that apply to + source entity. + properties: + namespaceSelector: + description: "NamespaceSelector is an optional field that + contains a selector expression. Only traffic that originates + from (or terminates at) endpoints within the selected + namespaces will be matched. When both NamespaceSelector + and another selector are defined on the same rule, then + only workload endpoints that are matched by both selectors + will be selected by the rule. \n For NetworkPolicy, an + empty NamespaceSelector implies that the Selector is limited + to selecting only workload endpoints in the same namespace + as the NetworkPolicy. \n For NetworkPolicy, `global()` + NamespaceSelector implies that the Selector is limited + to selecting only GlobalNetworkSet or HostEndpoint. \n + For GlobalNetworkPolicy, an empty NamespaceSelector implies + the Selector applies to workload endpoints across all + namespaces." + type: string + nets: + description: Nets is an optional field that restricts the + rule to only apply to traffic that originates from (or + terminates at) IP addresses in any of the given subnets. + items: + type: string + type: array + notNets: + description: NotNets is the negated version of the Nets + field. + items: + type: string + type: array + notPorts: + description: NotPorts is the negated version of the Ports + field. Since only some protocols have ports, if any ports + are specified it requires the Protocol match in the Rule + to be set to "TCP" or "UDP". + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + notSelector: + description: NotSelector is the negated version of the Selector + field. See Selector field for subtleties with negated + selectors. + type: string + ports: + description: "Ports is an optional field that restricts + the rule to only apply to traffic that has a source (destination) + port that matches one of these ranges/values. This value + is a list of integers or strings that represent ranges + of ports. \n Since only some protocols have ports, if + any ports are specified it requires the Protocol match + in the Rule to be set to \"TCP\" or \"UDP\"." + items: + anyOf: + - type: integer + - type: string + pattern: ^.* + x-kubernetes-int-or-string: true + type: array + selector: + description: "Selector is an optional field that contains + a selector expression (see Policy for sample syntax). + \ Only traffic that originates from (terminates at) endpoints + matching the selector will be matched. \n Note that: in + addition to the negated version of the Selector (see NotSelector + below), the selector expression syntax itself supports + negation. The two types of negation are subtly different. + One negates the set of matched endpoints, the other negates + the whole match: \n \tSelector = \"!has(my_label)\" matches + packets that are from other Calico-controlled \tendpoints + that do not have the label \"my_label\". \n \tNotSelector + = \"has(my_label)\" matches packets that are not from + Calico-controlled \tendpoints that do have the label \"my_label\". + \n The effect is that the latter will accept packets from + non-Calico sources whereas the former is limited to packets + from Calico-controlled endpoints." + type: string + serviceAccounts: + description: ServiceAccounts is an optional field that restricts + the rule to only apply to traffic that originates from + (or terminates at) a pod running as a matching service + account. + properties: + names: + description: Names is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account whose name is in the list. + items: + type: string + type: array + selector: + description: Selector is an optional field that restricts + the rule to only apply to traffic that originates + from (or terminates at) a pod running as a service + account that matches the given label selector. If + both Names and Selector are specified then they are + AND'ed. + type: string + type: object + services: + description: "Services is an optional field that contains + options for matching Kubernetes Services. If specified, + only traffic that originates from or terminates at endpoints + within the selected service(s) will be matched, and only + to/from each endpoint's port. \n Services cannot be specified + on the same rule as Selector, NotSelector, NamespaceSelector, + Nets, NotNets or ServiceAccounts. \n Ports and NotPorts + can only be specified with Services on ingress rules." + properties: + name: + description: Name specifies the name of a Kubernetes + Service to match. + type: string + namespace: + description: Namespace specifies the namespace of the + given Service. If left empty, the rule will match + within this policy's namespace. + type: string + type: object + type: object + required: + - action + type: object + type: array + order: + description: Order is an optional field that specifies the order in + which the policy is applied. Policies with higher "order" are applied + after those with lower order. If the order is omitted, it may be + considered to be "infinite" - i.e. the policy will be applied last. Policies + with identical order will be applied in alphanumerical order based + on the Policy "Name". + type: number + selector: + description: "The selector is an expression used to pick pick out + the endpoints that the policy should be applied to. \n Selector + expressions follow this syntax: \n \tlabel == \"string_literal\" + \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" + \ -> not equal; also matches if label is not present \tlabel in + { \"a\", \"b\", \"c\", ... } -> true if the value of label X is + one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", + ... } -> true if the value of label X is not one of \"a\", \"b\", + \"c\" \thas(label_name) -> True if that label is present \t! expr + -> negation of expr \texpr && expr -> Short-circuit and \texpr + || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() + or the empty selector -> matches all endpoints. \n Label names are + allowed to contain alphanumerics, -, _ and /. String literals are + more permissive but they do not support escape characters. \n Examples + (with made-up labels): \n \ttype == \"webserver\" && deployment + == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != + \"dev\" \t! has(label_name)" + type: string + serviceAccountSelector: + description: ServiceAccountSelector is an optional field for an expression + used to select a pod based on service accounts. + type: string + types: + description: "Types indicates whether this policy applies to ingress, + or to egress, or to both. When not explicitly specified (and so + the value on creation is empty or nil), Calico defaults Types according + to what Ingress and Egress are present in the policy. The default + is: \n - [ PolicyTypeIngress ], if there are no Egress rules (including + the case where there are also no Ingress rules) \n - [ PolicyTypeEgress + ], if there are Egress rules but no Ingress rules \n - [ PolicyTypeIngress, + PolicyTypeEgress ], if there are both Ingress and Egress rules. + \n When the policy is read back again, Types will always be one + of these values, never empty or nil." + items: + description: PolicyType enumerates the possible values of the PolicySpec + Types field. + type: string + type: array + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + name: networksets.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: NetworkSet + listKind: NetworkSetList + plural: networksets + singular: networkset + scope: Namespaced + versions: + - name: v1 + schema: + openAPIV3Schema: + description: NetworkSet is the Namespaced-equivalent of the GlobalNetworkSet. + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: NetworkSetSpec contains the specification for a NetworkSet + resource. + properties: + nets: + description: The list of IP networks that belong to this set. + items: + type: string + type: array + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] + +--- +--- +# Source: calico/templates/calico-kube-controllers-rbac.yaml # Include a clusterrole for the kube-controllers component, # and bind it to the calico-kube-controllers serviceaccount. @@ -51,16 +3809,19 @@ rules: - watch - list - get - # Pods are queried to check for existence. + # Pods are watched to check for existence as part of IPAM controller. - apiGroups: [""] resources: - pods verbs: - get + - list + - watch # IPAM resources are manipulated when nodes are deleted. - apiGroups: ["crd.projectcalico.org"] resources: - ippools + - ipreservations verbs: - list - apiGroups: ["crd.projectcalico.org"] @@ -74,6 +3835,17 @@ rules: - create - update - delete + - watch + # kube-controllers manages hostendpoints. + - apiGroups: ["crd.projectcalico.org"] + resources: + - hostendpoints + verbs: + - get + - list + - create + - update + - delete # Needs access to update clusterinformations. - apiGroups: ["crd.projectcalico.org"] resources: @@ -82,6 +3854,19 @@ rules: - get - create - update + # KubeControllersConfiguration is where it gets its config + - apiGroups: ["crd.projectcalico.org"] + resources: + - kubecontrollersconfigurations + verbs: + # read its own config + - get + # create a default if none exists + - create + # update status + - update + # watch for changes + - watch --- kind: ClusterRoleBinding apiVersion: rbac.authorization.k8s.io/v1 @@ -96,6 +3881,9 @@ subjects: name: calico-kube-controllers namespace: kube-system --- + +--- +# Source: calico/templates/calico-node-rbac.yaml # Include a clusterrole for the calico-node DaemonSet, # and bind it to the calico-node serviceaccount. kind: ClusterRole @@ -111,6 +3899,14 @@ rules: - namespaces verbs: - get + # EndpointSlices are used for Service-based network policy rule + # enforcement. + - apiGroups: ["discovery.k8s.io"] + resources: + - endpointslices + verbs: + - watch + - list - apiGroups: [""] resources: - endpoints @@ -166,6 +3962,7 @@ rules: - globalbgpconfigs - bgpconfigurations - ippools + - ipreservations - ipamblocks - globalnetworkpolicies - globalnetworksets @@ -174,6 +3971,7 @@ rules: - clusterinformations - hostendpoints - blockaffinities + - caliconodestatuses verbs: - get - list @@ -187,6 +3985,12 @@ rules: verbs: - create - update + # Calico must update some CRDs. + - apiGroups: [ "crd.projectcalico.org" ] + resources: + - caliconodestatuses + verbs: + - update # Calico stores some configuration information on the node. - apiGroups: [""] resources: @@ -195,7 +3999,7 @@ rules: - get - list - watch - # These permissions are only requried for upgrade from v2.6, and can + # These permissions are only required for upgrade from v2.6, and can # be removed after upgrade or on fresh installations. - apiGroups: ["crd.projectcalico.org"] resources: @@ -234,6 +4038,7 @@ rules: - daemonsets verbs: - get + --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding @@ -249,59 +4054,6 @@ subjects: namespace: kube-system --- - -# Source: calico/templates/calico-config.yaml -# This ConfigMap is used to configure a self-hosted Calico installation. -kind: ConfigMap -apiVersion: v1 -metadata: - name: calico-config - namespace: kube-system -data: - # Typha is disabled. - typha_service_name: "none" - # Configure the backend to use. - calico_backend: "bird" - - # Configure the MTU to use - veth_mtu: "1440" - - # The CNI network configuration to install on each node. The special - # values in this config will be automatically populated. - cni_network_config: |- - { - "name": "k8s-pod-network", - "cniVersion": "0.3.1", - "plugins": [ - { - "type": "calico", - "log_level": "info", - "datastore_type": "kubernetes", - "nodename": "__KUBERNETES_NODE_NAME__", - "mtu": __CNI_MTU__, - "ipam": { - "type": "calico-ipam" - }, - "policy": { - "type": "k8s" - }, - "kubernetes": { - "kubeconfig": "__KUBECONFIG_FILEPATH__" - } - }, - { - "type": "portmap", - "snat": true, - "capabilities": {"portMappings": true} - }, - { - "type": "bandwidth", - "capabilities": {"bandwidth": true} - } - ] - } ---- - # Source: calico/templates/calico-node.yaml # This manifest installs the calico-node container, as well # as the CNI plugins and network config on @@ -325,12 +4077,6 @@ spec: metadata: labels: k8s-app: calico-node - annotations: - # This, along with the CriticalAddonsOnly toleration below, - # marks the pod as a critical add-on, ensuring it gets - # priority scheduling and that its resources are reserved - # if it ever gets evicted. - scheduler.alpha.kubernetes.io/critical-pod: '' spec: nodeSelector: kubernetes.io/os: linux @@ -356,6 +4102,11 @@ spec: - name: upgrade-ipam image: "${_prefix}cni:${CALICO_TAG}" command: ["/opt/cni/bin/calico-ipam", "-upgrade"] + envFrom: + - configMapRef: + # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. + name: kubernetes-services-endpoint + optional: true env: - name: KUBERNETES_NODE_NAME valueFrom: @@ -377,7 +4128,12 @@ spec: # and CNI network config file on each node. - name: install-cni image: "${_prefix}cni:${CALICO_TAG}" - command: ["/install-cni.sh"] + command: ["/opt/cni/bin/install"] + envFrom: + - configMapRef: + # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. + name: kubernetes-services-endpoint + optional: true env: # Name of the CNI config file to create. - name: CNI_CONF_NAME @@ -419,11 +4175,16 @@ spec: securityContext: privileged: true containers: - # Runs calico-node container on each Kubernetes node. This + # Runs calico-node container on each Kubernetes node. This # container programs network policy and routes on each # host. - name: calico-node image: "${_prefix}node:${CALICO_TAG}" + envFrom: + - configMapRef: + # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. + name: kubernetes-services-endpoint + optional: true env: # Use Kubernetes API as the backing datastore. - name: DATASTORE_TYPE @@ -448,21 +4209,44 @@ spec: # Auto-detect the BGP IP address. - name: IP value: "autodetect" + # Use fixed subnet CIDR to autodetect IP (supported since Calico v3.16.x) + - name: IP_AUTODETECTION_METHOD + value: "cidr=${CLUSTER_SUBNET_CIDR}" # Enable IPIP - name: CALICO_IPV4POOL_IPIP value: "${CALICO_IPV4POOL_IPIP}" + # The default IPv4 pool to create on startup if none exists. Pod IPs will be + # chosen from this range. Changing this value after installation will have + # no effect. This should fall within '--cluster-cidr'. + - name: CALICO_IPV4POOL_CIDR + value: ${CALICO_IPV4POOL} + # Enable or Disable VXLAN on the default IP pool. + - name: CALICO_IPV4POOL_VXLAN + value: "Never" # Set MTU for tunnel device used if ipip is enabled - name: FELIX_IPINIPMTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu + # Set MTU for the VXLAN tunnel device. + - name: FELIX_VXLANMTU + valueFrom: + configMapKeyRef: + name: calico-config + key: veth_mtu + # Set MTU for the Wireguard tunnel device. + - name: FELIX_WIREGUARDMTU + valueFrom: + configMapKeyRef: + name: calico-config + key: veth_mtu # The default IPv4 pool to create on startup if none exists. Pod IPs will be # chosen from this range. Changing this value after installation will have - # no effect. This should fall within '--cluster-cidr'. - - name: CALICO_IPV4POOL_CIDR - value: ${CALICO_IPV4POOL} - # Disable file logging so 'kubectl logs' works. + # no effect. This should fall within `--cluster-cidr`. + # - name: CALICO_IPV4POOL_CIDR + # value: "192.168.0.0/16" + # Disable file logging so `kubectl logs` works. - name: CALICO_DISABLE_FILE_LOGGING value: "true" # Set Felix endpoint to host default action to ACCEPT. @@ -471,18 +4255,19 @@ spec: # Disable IPv6 on Kubernetes. - name: FELIX_IPV6SUPPORT value: "false" - # Set Felix logging to "info" - - name: FELIX_LOGSEVERITYSCREEN - value: "info" - name: FELIX_HEALTHENABLED value: "true" - - name: FELIX_USAGEREPORTINGENABLED - value: "false" securityContext: privileged: true resources: requests: cpu: 250m + lifecycle: + preStop: + exec: + command: + - /bin/calico-node + - -shutdown livenessProbe: exec: command: @@ -492,6 +4277,7 @@ spec: periodSeconds: 10 initialDelaySeconds: 10 failureThreshold: 6 + timeoutSeconds: 10 readinessProbe: exec: command: @@ -499,7 +4285,12 @@ spec: - -felix-ready - -bird-ready periodSeconds: 10 + timeoutSeconds: 10 volumeMounts: + # For maintaining CNI plugin API credentials. + - mountPath: /host/etc/cni/net.d + name: cni-net-dir + readOnly: false - mountPath: /lib/modules name: lib-modules readOnly: true @@ -514,6 +4305,16 @@ spec: readOnly: false - name: policysync mountPath: /var/run/nodeagent + # For eBPF mode, we need to be able to mount the BPF filesystem at /sys/fs/bpf so we mount in the + # parent directory. + - name: sysfs + mountPath: /sys/fs/ + # Bidirectional means that, if we mount the BPF filesystem at /sys/fs/bpf it will propagate to the host. + # If the host is known to mount that filesystem already then Bidirectional can be omitted. + mountPropagation: Bidirectional + - name: cni-log-dir + mountPath: /var/log/calico/cni + readOnly: true volumes: # Used by calico-node. - name: lib-modules @@ -529,6 +4330,10 @@ spec: hostPath: path: /run/xtables.lock type: FileOrCreate + - name: sysfs + hostPath: + path: /sys/fs/ + type: DirectoryOrCreate # Used to install CNI. - name: cni-bin-dir hostPath: @@ -536,6 +4341,10 @@ spec: - name: cni-net-dir hostPath: path: /etc/cni/net.d + # Used to access CNI logs. + - name: cni-log-dir + hostPath: + path: /var/log/calico/cni # Mount in the directory for host-local IPAM allocations. This is # used when upgrading from host-local to calico-ipam, and can be removed # if not using the upgrade-ipam init container. @@ -551,7 +4360,7 @@ spec: - name: flexvol-driver-host hostPath: type: DirectoryOrCreate - path: /var/srv/magnum/kubernetes/kubelet-plugins/volume/exec/nodeagent~uds + path: /opt/kubernetes/kubelet-plugins/volume/exec/nodeagent~uds --- apiVersion: v1 @@ -562,7 +4371,6 @@ metadata: --- # Source: calico/templates/calico-kube-controllers.yaml - # See https://github.com/projectcalico/kube-controllers apiVersion: apps/v1 kind: Deployment @@ -585,8 +4393,6 @@ spec: namespace: kube-system labels: k8s-app: calico-kube-controllers - annotations: - scheduler.alpha.kubernetes.io/critical-pod: '' spec: nodeSelector: kubernetes.io/os: linux @@ -607,11 +4413,21 @@ spec: value: node - name: DATASTORE_TYPE value: kubernetes + livenessProbe: + exec: + command: + - /usr/bin/check-status + - -l + periodSeconds: 10 + initialDelaySeconds: 10 + failureThreshold: 6 + timeoutSeconds: 10 readinessProbe: exec: command: - /usr/bin/check-status - -r + periodSeconds: 10 --- @@ -623,214 +4439,29 @@ metadata: --- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: felixconfigurations.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: FelixConfiguration - plural: felixconfigurations - singular: felixconfiguration ---- +# This manifest creates a Pod Disruption Budget for Controller to allow K8s Cluster Autoscaler to evict -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition +apiVersion: policy/v1beta1 +kind: PodDisruptionBudget metadata: - name: ipamblocks.crd.projectcalico.org + name: calico-kube-controllers + namespace: kube-system + labels: + k8s-app: calico-kube-controllers spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: IPAMBlock - plural: ipamblocks - singular: ipamblock + maxUnavailable: 1 + selector: + matchLabels: + k8s-app: calico-kube-controllers --- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: blockaffinities.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: BlockAffinity - plural: blockaffinities - singular: blockaffinity +# Source: calico/templates/calico-etcd-secrets.yaml --- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: ipamhandles.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: IPAMHandle - plural: ipamhandles - singular: ipamhandle +# Source: calico/templates/calico-typha.yaml --- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: ipamconfigs.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: IPAMConfig - plural: ipamconfigs - singular: ipamconfig - ---- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: bgppeers.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: BGPPeer - plural: bgppeers - singular: bgppeer - ---- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: bgpconfigurations.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: BGPConfiguration - plural: bgpconfigurations - singular: bgpconfiguration - ---- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: ippools.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: IPPool - plural: ippools - singular: ippool - ---- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: hostendpoints.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: HostEndpoint - plural: hostendpoints - singular: hostendpoint - ---- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: clusterinformations.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: ClusterInformation - plural: clusterinformations - singular: clusterinformation - ---- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: globalnetworkpolicies.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: GlobalNetworkPolicy - plural: globalnetworkpolicies - singular: globalnetworkpolicy - ---- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: globalnetworksets.crd.projectcalico.org -spec: - scope: Cluster - group: crd.projectcalico.org - version: v1 - names: - kind: GlobalNetworkSet - plural: globalnetworksets - singular: globalnetworkset - ---- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: networkpolicies.crd.projectcalico.org -spec: - scope: Namespaced - group: crd.projectcalico.org - version: v1 - names: - kind: NetworkPolicy - plural: networkpolicies - singular: networkpolicy - ---- - -apiVersion: apiextensions.k8s.io/v1beta1 -kind: CustomResourceDefinition -metadata: - name: networksets.crd.projectcalico.org -spec: - scope: Namespaced - group: crd.projectcalico.org - version: v1 - names: - kind: NetworkSet - plural: networksets - singular: networkset - +# Source: calico/templates/configure-canal.yaml EOF } diff --git a/magnum/drivers/common/templates/kubernetes/fragments/write-heat-params-master.sh b/magnum/drivers/common/templates/kubernetes/fragments/write-heat-params-master.sh index 23ca4df7f6..4f723fd822 100644 --- a/magnum/drivers/common/templates/kubernetes/fragments/write-heat-params-master.sh +++ b/magnum/drivers/common/templates/kubernetes/fragments/write-heat-params-master.sh @@ -52,6 +52,7 @@ PASSWORD="$PASSWORD" CLUSTER_NETWORK="$CLUSTER_NETWORK" CLUSTER_NETWORK_NAME="$CLUSTER_NETWORK_NAME" CLUSTER_SUBNET="$CLUSTER_SUBNET" +CLUSTER_SUBNET_CIDR="$CLUSTER_SUBNET_CIDR" TLS_DISABLED="$TLS_DISABLED" KUBE_DASHBOARD_ENABLED="$KUBE_DASHBOARD_ENABLED" INFLUX_GRAFANA_DASHBOARD_ENABLED="$INFLUX_GRAFANA_DASHBOARD_ENABLED" @@ -155,6 +156,7 @@ CONTAINERD_TARBALL_URL="$CONTAINERD_TARBALL_URL" CONTAINERD_TARBALL_SHA256="$CONTAINERD_TARBALL_SHA256" POST_INSTALL_MANIFEST_URL="$POST_INSTALL_MANIFEST_URL" METRICS_SCRAPER_TAG="$METRICS_SCRAPER_TAG" +CLUSTER_SUBNET_CIDR="$CLUSTER_SUBNET_CIDR" EOF } diff --git a/magnum/drivers/k8s_fedora_atomic_v1/templates/kubecluster.yaml b/magnum/drivers/k8s_fedora_atomic_v1/templates/kubecluster.yaml index 77d6287b0e..c472b7fd41 100644 --- a/magnum/drivers/k8s_fedora_atomic_v1/templates/kubecluster.yaml +++ b/magnum/drivers/k8s_fedora_atomic_v1/templates/kubecluster.yaml @@ -1214,6 +1214,7 @@ resources: fixed_network: {get_attr: [network, fixed_network]} fixed_network_name: {get_param: fixed_network_name} fixed_subnet: {get_attr: [network, fixed_subnet]} + fixed_subnet_cidr: {get_param: fixed_subnet_cidr} api_pool_id: {get_attr: [api_lb, pool_id]} etcd_pool_id: {get_attr: [etcd_lb, pool_id]} username: {get_param: username} diff --git a/magnum/drivers/k8s_fedora_atomic_v1/templates/kubemaster.yaml b/magnum/drivers/k8s_fedora_atomic_v1/templates/kubemaster.yaml index 41a6ca3fda..9ea3c3eb94 100644 --- a/magnum/drivers/k8s_fedora_atomic_v1/templates/kubemaster.yaml +++ b/magnum/drivers/k8s_fedora_atomic_v1/templates/kubemaster.yaml @@ -212,6 +212,10 @@ parameters: type: string description: Subnet from which to allocate fixed addresses. + fixed_subnet_cidr: + type: string + description: network range for fixed ip network + network_driver: type: string description: network driver to use for instantiating container networks @@ -779,6 +783,7 @@ resources: "$CLUSTER_NETWORK": {get_param: fixed_network} "$CLUSTER_NETWORK_NAME": {get_param: fixed_network_name} "$CLUSTER_SUBNET": {get_param: fixed_subnet} + "$CLUSTER_SUBNET_CIDR": {get_param: fixed_subnet_cidr} "$TLS_DISABLED": {get_param: tls_disabled} "$TRAEFIK_INGRESS_CONTROLLER_TAG": {get_param: traefik_ingress_controller_tag} "$KUBE_DASHBOARD_ENABLED": {get_param: kube_dashboard_enabled} diff --git a/magnum/drivers/k8s_fedora_coreos_v1/templates/kubecluster.yaml b/magnum/drivers/k8s_fedora_coreos_v1/templates/kubecluster.yaml index 4cfb1b5b4a..66e0dbb39f 100644 --- a/magnum/drivers/k8s_fedora_coreos_v1/templates/kubecluster.yaml +++ b/magnum/drivers/k8s_fedora_coreos_v1/templates/kubecluster.yaml @@ -93,6 +93,10 @@ parameters: description: uuid/name of an existing subnet to use to provision machines default: "" + fixed_subnet_cidr: + type: string + description: network range for fixed ip network + master_image: type: string description: glance image used to boot the server @@ -578,7 +582,7 @@ parameters: calico_tag: type: string description: tag of the calico containers used to provision the calico node - default: v3.13.1 + default: v3.21.2 calico_kube_controllers_tag: type: string @@ -1242,6 +1246,7 @@ resources: fixed_network: {get_attr: [network, fixed_network]} fixed_network_name: {get_param: fixed_network_name} fixed_subnet: {get_attr: [network, fixed_subnet]} + fixed_subnet_cidr: {get_param: fixed_subnet_cidr} api_pool_id: {get_attr: [api_lb, pool_id]} etcd_pool_id: {get_attr: [etcd_lb, pool_id]} username: {get_param: username} diff --git a/magnum/drivers/k8s_fedora_coreos_v1/templates/kubemaster.yaml b/magnum/drivers/k8s_fedora_coreos_v1/templates/kubemaster.yaml index 0ed389d12a..bcecb4f4e4 100644 --- a/magnum/drivers/k8s_fedora_coreos_v1/templates/kubemaster.yaml +++ b/magnum/drivers/k8s_fedora_coreos_v1/templates/kubemaster.yaml @@ -216,6 +216,10 @@ parameters: type: string description: Subnet from which to allocate fixed addresses. + fixed_subnet_cidr: + type: string + description: network range for fixed ip network + network_driver: type: string description: network driver to use for instantiating container networks @@ -797,7 +801,9 @@ resources: "$PASSWORD": {get_param: password} "$CLUSTER_NETWORK": {get_param: fixed_network} "$CLUSTER_NETWORK_NAME": {get_param: fixed_network_name} + "$CLUSTER_SUBNET_CIDR": {get_param: fixed_subnet_cidr} "$CLUSTER_SUBNET": {get_param: fixed_subnet} + "$CLUSTER_SUBNET_CIDR": {get_param: fixed_subnet_cidr} "$TLS_DISABLED": {get_param: tls_disabled} "$TRAEFIK_INGRESS_CONTROLLER_TAG": {get_param: traefik_ingress_controller_tag} "$KUBE_DASHBOARD_ENABLED": {get_param: kube_dashboard_enabled} diff --git a/releasenotes/notes/calico-3.21.2-193c895134e9c3c1.yaml b/releasenotes/notes/calico-3.21.2-193c895134e9c3c1.yaml new file mode 100644 index 0000000000..b7af96b170 --- /dev/null +++ b/releasenotes/notes/calico-3.21.2-193c895134e9c3c1.yaml @@ -0,0 +1,5 @@ +--- +upgrade: + - | + Upgrade to calico_tag=v3.21.2. Additionally, use fixed subnet CIDR for + IP_AUTODETECTION_METHOD supported from v3.16.x onwards.