Tempest plugin for the Manila project.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 

308 lines
16 KiB

# Copyright 2014 Mirantis Inc.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
from oslo_config import cfg
from oslo_config import types
service_option = cfg.BoolOpt("manila",
default=True,
help="Whether or not manila is expected to be "
"available")
share_group = cfg.OptGroup(name="share", title="Share Service Options")
ShareGroup = [
cfg.StrOpt("min_api_microversion",
default="2.0",
help="The minimum api microversion is configured to be the "
"value of the minimum microversion supported by Manila."),
cfg.StrOpt("max_api_microversion",
default="2.57",
help="The maximum api microversion is configured to be the "
"value of the latest microversion supported by Manila."),
cfg.StrOpt("region",
default="",
help="The share region name to use. If empty, the value "
"of identity.region is used instead. If no such region "
"is found in the service catalog, the first found one is "
"used."),
cfg.StrOpt("catalog_type",
default="share",
help="Catalog type of the Share service."),
cfg.StrOpt('endpoint_type',
default='publicURL',
choices=['public', 'admin', 'internal',
'publicURL', 'adminURL', 'internalURL'],
help="The endpoint type to use for the share service."),
cfg.BoolOpt("multitenancy_enabled",
default=True,
help="This option used to determine backend driver type, "
"multitenant driver uses share-networks, but "
"single-tenant doesn't."),
cfg.BoolOpt("create_networks_when_multitenancy_enabled",
default=True,
help="This option is used only when other "
"'multitenancy_enabled' option is set to 'True'. "
"If this one is set to True, then tempest will create "
"neutron networks for each new manila share-network "
"it creates. Else it will use manila share-networks with "
"empty values (case of StandAloneNetworkPlugin and "
"NeutronSingleNetworkPlugin)."),
cfg.ListOpt("enable_protocols",
default=["nfs", "cifs"],
help="First value of list is protocol by default, "
"items of list show enabled protocols at all."),
cfg.ListOpt("enable_ip_rules_for_protocols",
default=["nfs", "cifs", ],
help="Selection of protocols, that should "
"be covered with ip rule tests"),
cfg.ListOpt("enable_user_rules_for_protocols",
default=[],
help="Selection of protocols, that should "
"be covered with user rule tests"),
cfg.ListOpt("enable_cert_rules_for_protocols",
default=["glusterfs", ],
help="Protocols that should be covered with cert rule tests."),
cfg.ListOpt("enable_cephx_rules_for_protocols",
default=["cephfs", ],
help="Protocols to be covered with cephx rule tests."),
cfg.StrOpt("username_for_user_rules",
default="Administrator",
help="Username, that will be used in user tests."),
cfg.StrOpt("override_ip_for_nfs_access",
help="Forces access rules to be as specified on NFS scenario"
" tests. This can used for working around multiple "
"NATs between the VMs and the storage controller."),
cfg.StrOpt("storage_network",
help="Name or UUID of a neutron network that is used to access "
"shared file systems over. If specified, test virtual "
"machines are created with two NICs, the primary NIC is "
"attached to the private project network and the "
"secondary NIC is attached to the specified storage "
"network. If using NFS, access control is done with the "
"help of the IP address assigned to the virtual machine's "
"storage network NIC."),
cfg.ListOpt("enable_ro_access_level_for_protocols",
default=["nfs", ],
help="List of protocols to run tests with ro access level."),
# Capabilities
cfg.StrOpt("capability_storage_protocol",
deprecated_name="storage_protocol",
default="NFS_CIFS",
help="Backend protocol to target when creating volume types."),
cfg.BoolOpt("capability_snapshot_support",
help="Defines extra spec that satisfies specific back end "
"capability called 'snapshot_support' and will be used "
"for setting up custom share type. Defaults to value of "
"other config option 'run_snapshot_tests'."),
cfg.BoolOpt("capability_create_share_from_snapshot_support",
help="Defines extra spec that satisfies specific back end "
"capability called 'create_share_from_snapshot_support' "
"and will be used for setting up a custom share type. "
"Defaults to the value of run_snapshot_tests. Set it to "
"False if the driver being tested does not support "
"creating shares from snapshots."),
cfg.BoolOpt("capability_revert_to_snapshot_support",
deprecated_for_removal=True,
deprecated_reason="Redundant configuration option. Please use "
"'run_revert_to_snapshot_tests' config "
"option instead.",
help="Defines extra spec that satisfies specific back end "
"capability called 'revert_to_snapshot_support' "
"and will be used for setting up custom share type. "
"Defaults to the value of run_revert_to_snapshot_tests."),
cfg.StrOpt("capability_sg_consistent_snapshot_support",
choices=["host", "pool", None],
help="Backend capability to create consistent snapshots of "
"share group members. Will be used with creation "
"of new share group types as group spec."),
cfg.StrOpt("share_network_id",
default="",
help="Some backend drivers requires share network "
"for share creation. Share network id, that will be "
"used for shares. If not set, it won't be used. Setting "
"this option to a valid share network ID will mean that "
"the value of create_networks_when_multitenancy_enabled "
"should be False."),
cfg.StrOpt("alt_share_network_id",
default="",
help="Share network id, that will be used for shares"
" in alt tenant. If not set, it won't be used. Setting "
"this option to a valid share network ID will mean that "
"the value of create_networks_when_multitenancy_enabled "
"should be False."),
cfg.StrOpt("admin_share_network_id",
default="",
help="Share network id, that will be used for shares"
" in admin tenant. If not set, it won't be used. Setting "
"this option to a valid share network ID will mean that "
"the value of create_networks_when_multitenancy_enabled "
"should be False."),
cfg.BoolOpt("multi_backend",
default=False,
help="Runs Manila multi-backend tests."),
cfg.ListOpt("backend_names",
default=[],
help="Names of share backends, that will be used with "
"multibackend tests. Tempest will use first two values."),
cfg.IntOpt("share_creation_retry_number",
default=0,
help="Defines number of retries for share creation. "
"It is useful to avoid failures caused by unstable "
"environment."),
cfg.IntOpt("build_interval",
default=3,
help="Time in seconds between share availability checks."),
cfg.IntOpt("build_timeout",
default=500,
help="Timeout in seconds to wait for a share to become"
"available."),
cfg.BoolOpt("suppress_errors_in_cleanup",
default=False,
help="Whether to suppress errors with clean up operation "
"or not. There are cases when we may want to skip "
"such errors and catch only test errors."),
cfg.MultiOpt("security_service",
item_type=types.Dict(),
secret=True,
help="This option enables specifying security service "
"parameters needed to create security services "
"dynamically in order to run the tempest tests. "
"The configured security service must be reachable by "
"the project share networks created by the tests. So, "
"ideally project networks must be able to route to the "
"network where the pre-existing security services has "
"been deployed. The set of parameters that can be "
"configured is the same used in the security service "
"creation. You can repeat this option many times, and "
"each entry takes the standard dict config parameters: "
"security_service = "
"ss_type:<ldap, kerberos or active_directory>, "
"ss_dns_ip:value, ss_user:value, ss_password=value, "
"ss_domain:value, ss_server:value"),
# Switching ON/OFF test suites filtered by features
cfg.BoolOpt("run_quota_tests",
default=True,
help="Defines whether to run quota tests or not."),
cfg.BoolOpt("run_extend_tests",
default=True,
help="Defines whether to run share extend tests or not. "
"Disable this feature if used driver doesn't "
"support it."),
cfg.BoolOpt("run_shrink_tests",
default=True,
help="Defines whether to run share shrink tests or not. "
"Disable this feature if used driver doesn't "
"support it."),
cfg.BoolOpt("run_snapshot_tests",
default=True,
help="Defines whether to run tests that use share snapshots "
"or not. Disable this feature if used driver doesn't "
"support it."),
cfg.BoolOpt("run_revert_to_snapshot_tests",
default=False,
help="Defines whether to run tests that revert shares "
"to snapshots or not. Enable this feature if used "
"driver supports it."),
cfg.BoolOpt("run_share_group_tests",
default=True,
deprecated_name="run_consistency_group_tests",
help="Defines whether to run share group tests or not."),
cfg.BoolOpt("run_replication_tests",
default=False,
help="Defines whether to run replication tests or not. "
"Enable this feature if the driver is configured "
"for replication."),
cfg.BoolOpt("run_multiple_share_replicas_tests",
default=True,
help="Defines whether to run multiple replicas creation test "
"or not. Enable this if the driver can create more than "
"one replica for a share."),
cfg.BoolOpt("run_host_assisted_migration_tests",
deprecated_name="run_migration_tests",
default=False,
help="Enable or disable host-assisted migration tests."),
cfg.BoolOpt("run_driver_assisted_migration_tests",
deprecated_name="run_migration_tests",
default=False,
help="Enable or disable driver-assisted migration tests."),
cfg.BoolOpt("run_migration_with_preserve_snapshots_tests",
default=False,
help="Enable or disable migration with "
"preserve_snapshots tests set to True."),
cfg.BoolOpt("run_manage_unmanage_tests",
default=False,
help="Defines whether to run manage/unmanage tests or not. "
"These test may leave orphaned resources, so be careful "
"enabling this opt."),
cfg.BoolOpt("run_manage_unmanage_snapshot_tests",
default=False,
help="Defines whether to run manage/unmanage snapshot tests "
"or not. These tests may leave orphaned resources, so be "
"careful enabling this opt."),
cfg.BoolOpt("run_mount_snapshot_tests",
default=False,
help="Enable or disable mountable snapshot tests."),
cfg.BoolOpt("run_create_share_from_snapshot_in_another_pool_or_az_tests",
default=False,
help="Defines whether to run tests that create share from "
"snapshots in another pool or az. Enable this "
"option if the used driver supports it."),
cfg.BoolOpt("run_share_server_migration_tests",
default=False,
help="Defines whether to run share servers migration tests. "
"Enable this option if the used driver supports it."),
cfg.StrOpt("image_with_share_tools",
default="manila-service-image-master",
help="Image name for vm booting with nfs/smb clients tool."),
cfg.StrOpt("image_username",
default="manila",
help="Image username."),
cfg.StrOpt("image_password",
help="Image password. Should be used for "
"'image_with_share_tools' without Nova Metadata support."),
cfg.StrOpt("client_vm_flavor_ref",
default="100",
help="Flavor used for client vm in scenario tests."),
cfg.IntOpt("migration_timeout",
default=1500,
help="Time to wait for share migration before "
"timing out (seconds)."),
cfg.IntOpt("share_server_migration_timeout",
default="1500",
help="Time to wait for share server migration before "
"timing out (seconds)."),
cfg.StrOpt("default_share_type_name",
help="Default share type name to use in tempest tests."),
cfg.StrOpt("backend_replication_type",
default='none',
choices=['none', 'writable', 'readable', 'dr'],
help="Specify the replication type supported by the backend."),
cfg.IntOpt("share_size",
default=1,
help="Default size in GB for shares created by share tests."),
cfg.BoolOpt("run_ipv6_tests",
default=False,
help="Enable or disable running IPv6 NFS scenario tests. "
"These tests validate that IPv6 export locations work, "
"and that access can be provided to IPv6 clients. When "
"you do not specify a storage_network, the tests will "
"attempt to create an IPv6 subnet on the project network "
"they create for ping and SSH to the client test VM "
"where data path testing is performed."),
]