Merge "In-tree Install Guide"

This commit is contained in:
Jenkins 2016-08-16 08:32:34 +00:00 committed by Gerrit Code Review
commit ea9748fa4b
29 changed files with 1887 additions and 1 deletions

3
.gitignore vendored
View File

@ -39,6 +39,9 @@ api-ref/build
# Files created by releasenotes build # Files created by releasenotes build
releasenotes/build releasenotes/build
# Files created by install-guide builds
install-guide/build
# Development environment files # Development environment files
.project .project
.pydevproject .pydevproject

View File

@ -0,0 +1,71 @@
3. Complete the rest of the configuration in ``manila.conf``:
* In the ``[DEFAULT]`` and ``[oslo_messaging_rabbit]`` sections, configure
``RabbitMQ`` message queue access:
.. code-block:: ini
[DEFAULT]
...
rpc_backend = rabbit
[oslo_messaging_rabbit]
...
rabbit_host = controller
rabbit_userid = openstack
rabbit_password = RABBIT_PASS
Replace ``RABBIT_PASS`` with the password you chose for the ``openstack``
account in ``RabbitMQ``.
* In the ``[DEFAULT]`` section, set the following config values:
.. code-block:: ini
[DEFAULT]
...
default_share_type = default_share_type
share_name_template = share-%s
rootwrap_config = /etc/manila/rootwrap.conf
api_paste_config = /etc/manila/api-paste.ini
* In the ``[DEFAULT]`` and ``[keystone_authtoken]`` sections, configure
Identity service access:
.. code-block:: ini
[DEFAULT]
...
auth_strategy = keystone
[keystone_authtoken]
...
memcached_servers = controller:11211
auth_uri = http://controller:5000
auth_url = http://controller:35357
auth_type = password
project_domain_id = default
user_domain_id = default
project_name = service
username = manila
password = MANILA_PASS
Replace ``MANILA_PASS`` with the password you chose for the ``manila``
user in the Identity service.
* In the ``[DEFAULT]`` section, configure the ``my_ip`` option to use the
management interface IP address of the controller node:
.. code-block:: ini
[DEFAULT]
...
my_ip = 10.0.0.11
* In the ``[oslo_concurrency]`` section, configure the lock path:
.. code-block:: ini
[oslo_concurrency]
...
lock_path = /var/lock/manila

View File

@ -0,0 +1,208 @@
Prerequisites
-------------
Before you install and configure the Shared File Systems service, you
must create a database, service credentials, and `API endpoints`.
#. To create the database, complete these steps:
* Use the database access client to connect to the database server as the
``root`` user:
.. code-block:: console
$ mysql -u root -p
* Create the `manila` database:
.. code-block:: console
CREATE DATABASE manila;
* Grant proper access to the ``manila`` database:
.. code-block:: console
GRANT ALL PRIVILEGES ON manila.* TO 'manila'@'localhost' \
IDENTIFIED BY 'MANILA_DBPASS';
GRANT ALL PRIVILEGES ON manila.* TO 'manila'@'%' \
IDENTIFIED BY 'MANILA_DBPASS';
Replace ``MANILA_DBPASS`` with a suitable password.
* Exit the database access client.
#. Source the ``admin`` credentials to gain access to admin CLI commands:
.. code-block:: console
$ . admin-openrc.sh
#. To create the service credentials, complete these steps:
* Create a ``manila`` user:
.. code-block:: console
$ openstack user create --domain default --password-prompt manila
User Password:
Repeat User Password:
+-----------+----------------------------------+
| Field | Value |
+-----------+----------------------------------+
| domain_id | e0353a670a9e496da891347c589539e9 |
| enabled | True |
| id | 83a3990fc2144100ba0e2e23886d8acc |
| name | manila |
+-----------+----------------------------------+
* Add the ``admin`` role to the ``manila`` user:
.. code-block:: console
$ openstack role add --project service --user manila admin
.. note::
This command provides no output.
* Create the ``manila`` and ``manilav2`` service entities:
.. code-block:: console
$ openstack service create --name manila \
--description "OpenStack Shared File Systems" share
+-------------+----------------------------------+
| Field | Value |
+-------------+----------------------------------+
| description | OpenStack Shared File Systems |
| enabled | True |
| id | 82378b5a16b340aa9cc790cdd46a03ba |
| name | manila |
| type | share |
+-------------+----------------------------------+
.. code-block:: console
$ openstack service create --name manilav2 \
--description "OpenStack Shared File Systems" sharev2
+-------------+----------------------------------+
| Field | Value |
+-------------+----------------------------------+
| description | OpenStack Shared File Systems |
| enabled | True |
| id | 30d92a97a81a4e5d8fd97a32bafd7b88 |
| name | manilav2 |
| type | sharev2 |
+-------------+----------------------------------+
.. note::
The Shared File Systems services require two service entities.
#. Create the Shared File Systems service API endpoints:
.. code-block:: console
$ openstack endpoint create --region RegionOne \
share public http://controller:8786/v1/%\(tenant_id\)s
+--------------+-----------------------------------------+
| Field | Value |
+--------------+-----------------------------------------+
| enabled | True |
| id | 0bd2bbf8d28b433aaea56a254c69f69d |
| interface | public |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 82378b5a16b340aa9cc790cdd46a03ba |
| service_name | manila |
| service_type | share |
| url | http://controller:8786/v1/%(tenant_id)s |
+--------------+-----------------------------------------+
$ openstack endpoint create --region RegionOne \
share internal http://controller:8786/v1/%\(tenant_id\)s
+--------------+-----------------------------------------+
| Field | Value |
+--------------+-----------------------------------------+
| enabled | True |
| id | a2859b5732cc48b5b083dd36dafb6fd9 |
| interface | internal |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 82378b5a16b340aa9cc790cdd46a03ba |
| service_name | manila |
| service_type | share |
| url | http://controller:8786/v1/%(tenant_id)s |
+--------------+-----------------------------------------+
$ openstack endpoint create --region RegionOne \
share admin http://controller:8786/v1/%\(tenant_id\)s
+--------------+-----------------------------------------+
| Field | Value |
+--------------+-----------------------------------------+
| enabled | True |
| id | f7f46df93a374cc49c0121bef41da03c |
| interface | admin |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 82378b5a16b340aa9cc790cdd46a03ba |
| service_name | manila |
| service_type | share |
| url | http://controller:8786/v1/%(tenant_id)s |
+--------------+-----------------------------------------+
.. code-block:: console
$ openstack endpoint create --region RegionOne \
sharev2 public http://controller:8786/v2/%\(tenant_id\)s
+--------------+-----------------------------------------+
| Field | Value |
+--------------+-----------------------------------------+
| enabled | True |
| id | d63cc0d358da4ea680178657291eddc1 |
| interface | public |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 30d92a97a81a4e5d8fd97a32bafd7b88 |
| service_name | manilav2 |
| service_type | sharev2 |
| url | http://controller:8786/v2/%(tenant_id)s |
+--------------+-----------------------------------------+
$ openstack endpoint create --region RegionOne \
sharev2 internal http://controller:8786/v2/%\(tenant_id\)s
+--------------+-----------------------------------------+
| Field | Value |
+--------------+-----------------------------------------+
| enabled | True |
| id | afc86e5f50804008add349dba605da54 |
| interface | internal |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 30d92a97a81a4e5d8fd97a32bafd7b88 |
| service_name | manilav2 |
| service_type | sharev2 |
| url | http://controller:8786/v2/%(tenant_id)s |
+--------------+-----------------------------------------+
$ openstack endpoint create --region RegionOne \
sharev2 admin http://controller:8786/v2/%\(tenant_id\)s
+--------------+-----------------------------------------+
| Field | Value |
+--------------+-----------------------------------------+
| enabled | True |
| id | e814a0cec40546e98cf0c25a82498483 |
| interface | admin |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 30d92a97a81a4e5d8fd97a32bafd7b88 |
| service_name | manilav2 |
| service_type | sharev2 |
| url | http://controller:8786/v2/%(tenant_id)s |
+--------------+-----------------------------------------+
.. note::
The Shared File Systems services require endpoints for each service
entity.

View File

@ -0,0 +1,98 @@
2. Create the LVM physical volume ``/dev/sdc``:
.. code-block:: console
# pvcreate /dev/sdc
Physical volume "/dev/sdc" successfully created
#. Create the LVM volume group ``manila-volumes``:
.. code-block:: console
# vgcreate manila-volumes /dev/sdc
Volume group "manila-volumes" successfully created
The Shared File Systems service creates logical volumes in this volume
group.
#. Only instances can access Shared File Systems service volumes. However,
the underlying operating system manages the devices associated with
the volumes. By default, the LVM volume scanning tool scans the
``/dev`` directory for block storage devices that
contain volumes. If projects use LVM on their volumes, the scanning
tool detects these volumes and attempts to cache them which can cause
a variety of problems with both the underlying operating system
and project volumes. You must reconfigure LVM to scan only the devices
that contain the ``cinder-volume`` and ``manila-volumes`` volume groups.
Edit the ``/etc/lvm/lvm.conf`` file and complete the following actions:
* In the ``devices`` section, add a filter that accepts the
``/dev/sdb`` and ``/dev/sdc`` devices and rejects all other devices:
.. code-block:: ini
devices {
...
filter = [ "a/sdb/", "a/sdc", "r/.*/"]
.. warning::
If your storage nodes use LVM on the operating system disk, you
must also add the associated device to the filter. For example,
if the ``/dev/sda`` device contains the operating system:
.. code-block:: ini
filter = [ "a/sda/", "a/sdb/", "a/sdc", "r/.*/"]
Similarly, if your compute nodes use LVM on the operating
system disk, you must also modify the filter in the
``/etc/lvm/lvm.conf`` file on those nodes to include only
the operating system disk. For example, if the ``/dev/sda``
device contains the operating system:
.. code-block:: ini
filter = [ "a/sda/", "r/.*/"]
Configure components
--------------------
#. Edit the ``/etc/manila/manila.conf`` file and complete the following
actions:
* In the ``[DEFAULT]`` section, enable the LVM driver and the NFS/CIFS
protocols:
.. code-block:: ini
[DEFAULT]
...
enabled_share_backends = lvm
enabled_share_protocols = NFS,CIFS
.. note::
Back end names are arbitrary. As an example, this guide uses the name
of the driver.
* In the ``[lvm]`` section, configure the LVM driver:
.. code-block:: ini
[lvm]
share_backend_name = LVM
share_driver = manila.share.drivers.lvm.LVMShareDriver
driver_handles_share_servers = False
lvm_share_volume_group = manila-volumes
lvm_share_export_ip = MANAGEMENT_INTERFACE_IP_ADDRESS
Replace ``MANAGEMENT_INTERFACE_IP_ADDRESS`` with the IP address
of the management network interface on your storage node,
typically 10.0.0.41 for the first node in the the example architecture
shown below:
.. figure:: figures/hwreqs.png
:alt: Hardware requirements
**Hardware requirements**.

View File

@ -0,0 +1,7 @@
Shared File Systems Option 1: No driver support for share servers management
----------------------------------------------------------------------------
For simplicity, this configuration references the same storage node
configuration for the Block Storage service. However, the LVM driver
requires a separate empty local block storage device to avoid conflict
with the Block Storage service. The instructions use ``/dev/sdc``, but
you can substitute a different value for your particular node.

View File

@ -0,0 +1,84 @@
Configure components
--------------------
#. Edit the ``/etc/manila/manila.conf`` file and complete the following
actions:
* In the ``[DEFAULT]`` section, enable the generic driver and the NFS/CIFS
protocols:
.. code-block:: ini
[DEFAULT]
...
enabled_share_backends = generic
enabled_share_protocols = NFS,CIFS
.. note::
Back end names are arbitrary. As an example, this guide uses the name
of the driver.
* In the ``[neutron]``, ``[nova]``, and ``[cinder]`` sections, enable
authentication for those services:
.. code-block:: ini
[neutron]
...
url = http://controller:9696
auth_uri = http://controller:5000
auth_url = http://controller:35357
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = NEUTRON_PASS
[nova]
...
auth_uri = http://controller:5000
auth_url = http://controller:35357
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = nova
password = NOVA_PASS
[cinder]
...
auth_uri = http://controller:5000
auth_url = http://controller:35357
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = cinder
password = CINDER_PASS
* In the ``[generic]`` section, configure the generic driver:
.. code-block:: ini
[generic]
share_backend_name = GENERIC
share_driver = manila.share.drivers.generic.GenericShareDriver
driver_handles_share_servers = True
service_instance_flavor_id = 100
service_image_name = manila-service-image
service_instance_user = manila
service_instance_password = manila
interface_driver = manila.network.linux.interface.BridgeInterfaceDriver
.. note::
You can also use SSH keys instead of password authentication for
service instance credentials.

View File

@ -0,0 +1,15 @@
Shared File Systems Option 2: Driver support for share servers management
-------------------------------------------------------------------------
For simplicity, this configuration references the same storage node
configuration for the Block Storage service.
.. note::
This guide describes how to configure the Shared File Systems service to
use the ``generic`` driver with the driver handles share server mode
(DHSS) enabled. This mode requires Compute (nova), Networking (neutron) and
Block storage (cinder) services for managing share servers. The information
used for creating share servers is configured as share networks. Generic
driver with DHSS enabled also requires network to be attached to a public
router.

View File

@ -0,0 +1,77 @@
4. Complete the rest of the configuration in ``manila.conf``.
* In the ``[DEFAULT]`` and ``[oslo_messaging_rabbit]`` sections,
configure ``RabbitMQ`` message queue access:
.. code-block:: ini
[DEFAULT]
...
rpc_backend = rabbit
[oslo_messaging_rabbit]
...
rabbit_host = controller
rabbit_userid = openstack
rabbit_password = RABBIT_PASS
Replace ``RABBIT_PASS`` with the password you chose for the
``openstack`` account in ``RabbitMQ``.
* In the ``[DEFAULT]`` section, set the following config values:
.. code-block:: ini
[DEFAULT]
...
default_share_type = default_share_type
rootwrap_config = /etc/manila/rootwrap.conf
* In the ``[DEFAULT]`` and ``[keystone_authtoken]`` sections, configure
Identity service access:
.. code-block:: ini
[DEFAULT]
...
auth_strategy = keystone
[keystone_authtoken]
...
memcached_servers = controller:11211
auth_uri = http://controller:5000
auth_url = http://controller:35357
auth_type = password
project_domain_id = default
user_domain_id = default
project_name = service
username = manila
password = MANILA_PASS
Replace ``MANILA_PASS`` with the password you chose for the ``manila``
user in the Identity service.
* In the ``[DEFAULT]`` section, configure the ``my_ip`` option:
.. code-block:: ini
[DEFAULT]
...
my_ip = MANAGEMENT_INTERFACE_IP_ADDRESS
Replace ``MANAGEMENT_INTERFACE_IP_ADDRESS`` with the IP address of the
management network interface on your share node, typically 10.0.0.41 for
the first node in the example architecture shown below:
.. figure:: figures/hwreqs.png
:alt: Hardware requirements
**Hardware requirements**
* In the ``[oslo_concurrency]`` section, configure the lock path:
.. code-block:: ini
[oslo_concurrency]
...
lock_path = /var/lib/manila/tmp

View File

@ -0,0 +1,36 @@
The share node can support two modes, with and without the handling of
share servers. The mode depends on driver support.
Option 1
--------
Deploying the service without driver support for share management.
In this mode, the service does not do anything related to networking. The
operator must ensure network connectivity between instances and the NFS
server. This tutorial demonstrates setting up the LVM driver to support this
driver mode. It requires LVM and NFS packages as well as an additional disk
for the ``manila-share`` LVM volume group. This driver
mode may be referred to as ``driver_handles_share_servers = False`` mode, or
simply ``DHSS=False`` mode.
Option 2
--------
Deploying the service with driver support for share management. In
this mode, the service runs with a back end driver that creates and manages
share servers. This tutorial demonstrates setting up the Generic driver.
This driver requires Compute (nova), Networking (neutron) and Block
storage (cinder) services for managing share servers. The information used for
creating share servers is configured with the help of share networks. This
option uses the generic driver with the handling of share servers capacity
and requires attaching the ``selfservice`` network to a router. This driver
mode may be referred to as ``driver_handles_share_servers = True`` mode, or
simply ``DHSS=True`` mode.
.. warning::
When running the generic driver in ``DHSS=True`` driver mode, the share
service should be run on the same node as the networking service.
However, such a service may not be able to run the LVM driver that runs
in ``DHSS=False`` driver mode effectively, due to a bug in some
distributions of Linux. For more information, see LVM Driver section in the
`Configuration Reference Guide
<http://docs.openstack.org/mitaka/config-reference/shared-file-systems.html>`_.

View File

@ -0,0 +1,306 @@
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# This file is execfile()d with the current directory set to its
# containing dir.
#
# Note that not all possible configuration values are present in this
# autogenerated file.
#
# All configuration values have a default; values that are commented out
# serve to show the default.
import os
import openstackdocstheme
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
# sys.path.insert(0, os.path.abspath('.'))
# -- General configuration ------------------------------------------------
# If your documentation needs a minimal Sphinx version, state it here.
# needs_sphinx = '1.0'
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
# TODO(ajaeger): enable PDF building, for example add 'rst2pdf.pdfbuilder'
# extensions =
# Add any paths that contain templates here, relative to this directory.
# templates_path = ['_templates']
# The suffix of source filenames.
source_suffix = '.rst'
# The encoding of source files.
# source_encoding = 'utf-8-sig'
# The master toctree document.
master_doc = 'index'
# General information about the project.
project = u'Installation Guide for Shared File Systems Service'
bug_tag = u'install-guide'
copyright = u'2016, OpenStack contributors'
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
#
# The short X.Y version.
version = '0.1'
# The full version, including alpha/beta/rc tags.
release = '0.1'
# A few variables have to be set for the log-a-bug feature.
# giturl: The location of conf.py on Git. Must be set manually.
# gitsha: The SHA checksum of the bug description. Automatically
# extracted from git log.
# bug_tag: Tag for categorizing the bug. Must be set manually.
# These variables are passed to the logabug code via html_context.
giturl = u'http://git.openstack.org/cgit/openstack/manila/tree/install-guide/source'
git_cmd = "/usr/bin/git log | head -n1 | cut -f2 -d' '"
gitsha = os.popen(git_cmd).read().strip('\n')
# source tree
pwd = os.getcwd()
html_context = {
"pwd": pwd,
"gitsha": gitsha,
"bug_tag": bug_tag,
"giturl": giturl,
"bug_project": "manila",
}
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
# language = None
# There are two options for replacing |today|: either, you set today to some
# non-false value, then it is used:
# today = ''
# Else, today_fmt is used as the format for a strftime call.
# today_fmt = '%B %d, %Y'
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
exclude_patterns = ["common/*.rst"]
# The reST default role (used for this markup: `text`) to use for all
# documents.
# default_role = None
# If true, '()' will be appended to :func: etc. cross-reference text.
# add_function_parentheses = True
# If true, the current module name will be prepended to all description
# unit titles (such as .. function::).
# add_module_names = True
# If true, sectionauthor and moduleauthor directives will be shown in the
# output. They are ignored by default.
# show_authors = False
# The name of the Pygments (syntax highlighting) style to use.
pygments_style = 'sphinx'
# A list of ignored prefixes for module index sorting.
# modindex_common_prefix = []
# If true, keep warnings as "system message" paragraphs in the built documents.
# keep_warnings = False
# -- Options for HTML output ----------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
html_theme = 'openstackdocs'
# Theme options are theme-specific and customize the look and feel of a theme
# further. For a list of options available for each theme, see the
# documentation.
# html_theme_options = {}
# Add any paths that contain custom themes here, relative to this directory.
html_theme_path = [openstackdocstheme.get_html_theme_path()]
# The name for this set of Sphinx documents. If None, it defaults to
# "<project> v<release> documentation".
# html_title = None
# A shorter title for the navigation bar. Default is the same as html_title.
# html_short_title = None
# The name of an image file (relative to this directory) to place at the top
# of the sidebar.
# html_logo = None
# The name of an image file (within the static path) to use as favicon of the
# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
# pixels large.
# html_favicon = None
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
# html_static_path = []
# Add any extra paths that contain custom files (such as robots.txt or
# .htaccess) here, relative to this directory. These files are copied
# directly to the root of the documentation.
# html_extra_path = []
# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
# using the given strftime format.
# So that we can enable "log-a-bug" links from each output HTML page, this
# variable must be set to a format that includes year, month, day, hours and
# minutes.
html_last_updated_fmt = '%Y-%m-%d %H:%M'
# If true, SmartyPants will be used to convert quotes and dashes to
# typographically correct entities.
# html_use_smartypants = True
# Custom sidebar templates, maps document names to template names.
# html_sidebars = {}
# Additional templates that should be rendered to pages, maps page names to
# template names.
# html_additional_pages = {}
# If false, no module index is generated.
# html_domain_indices = True
# If false, no index is generated.
html_use_index = False
# If true, the index is split into individual pages for each letter.
# html_split_index = False
# If true, links to the reST sources are added to the pages.
html_show_sourcelink = False
# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
# html_show_sphinx = True
# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
# html_show_copyright = True
# If true, an OpenSearch description file will be output, and all pages will
# contain a <link> tag referring to it. The value of this option must be the
# base URL from which the finished HTML is served.
# html_use_opensearch = ''
# This is the file name suffix for HTML files (e.g. ".xhtml").
# html_file_suffix = None
# Output file base name for HTML help builder.
htmlhelp_basename = 'install-guide'
# If true, publish source files
html_copy_source = False
# -- Options for LaTeX output ---------------------------------------------
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
# 'papersize': 'letterpaper',
# The font size ('10pt', '11pt' or '12pt').
# 'pointsize': '10pt',
# Additional stuff for the LaTeX preamble.
# 'preamble': '',
}
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
latex_documents = [
('index', 'InstallGuide.tex', u'Install Guide',
u'OpenStack contributors', 'manual'),
]
# The name of an image file (relative to this directory) to place at the top of
# the title page.
# latex_logo = None
# For "manual" documents, if this is true, then toplevel headings are parts,
# not chapters.
# latex_use_parts = False
# If true, show page references after internal links.
# latex_show_pagerefs = False
# If true, show URL addresses after external links.
# latex_show_urls = False
# Documents to append as an appendix to all manuals.
# latex_appendices = []
# If false, no module index is generated.
# latex_domain_indices = True
# -- Options for manual page output ---------------------------------------
# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [
('index', 'installguide', u'Install Guide',
[u'OpenStack contributors'], 1)
]
# If true, show URL addresses after external links.
# man_show_urls = False
# -- Options for Texinfo output -------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
('index', 'InstallGuide', u'Install Guide',
u'OpenStack contributors', 'InstallGuide',
'This guide shows OpenStack end users how to install '
'an OpenStack cloud.', 'Miscellaneous'),
]
# Documents to append as an appendix to all manuals.
# texinfo_appendices = []
# If false, no module index is generated.
# texinfo_domain_indices = True
# How to display URL addresses: 'footnote', 'no', or 'inline'.
# texinfo_show_urls = 'footnote'
# If true, do not generate a @detailmenu in the "Top" node's menu.
# texinfo_no_detailmenu = False
# -- Options for Internationalization output ------------------------------
locale_dirs = ['locale/']
# -- Options for PDF output --------------------------------------------------
pdf_documents = [
('index', u'InstallGuide', u'Install Guide',
u'OpenStack contributors')
]

Binary file not shown.

Binary file not shown.

After

Width:  |  Height:  |  Size: 89 KiB

File diff suppressed because one or more lines are too long

After

Width:  |  Height:  |  Size: 41 KiB

View File

@ -0,0 +1,39 @@
====================================
Shared File Systems service overview
====================================
The OpenStack Shared File Systems service (manila) provides file storage to a
virtual machine. The Shared File Systems service provides an infrastructure
for managing and provisioning of file shares. The service also enables
management of share types as well as share snapshots if a driver supports
them.
The Shared File Systems service consists of the following components:
manila-api
A WSGI app that authenticates and routes requests throughout the Shared File
Systems service. It supports the OpenStack APIs.
manila-data
A standalone service whose purpose is to receive requests, process data
operations such as copying, share migration or backup, and send back a
response after an operation has been completed.
manila-scheduler
Schedules and routes requests to the appropriate share service. The
scheduler uses configurable filters and weighers to route requests. The
Filter Scheduler is the default and enables filters on things like Capacity,
Availability Zone, Share Types, and Capabilities as well as custom filters.
manila-share
Manages back-end devices that provide shared file systems. A manila-share
process can run in one of two modes, with or without handling of share
servers. Share servers export file shares via share networks. When share
servers are not used, the networking requirements are handled outside of
Manila.
Messaging queue
Routes information between the Shared File Systems processes.
For more information, see `Configuration Reference Guide
<http://docs.openstack.org/mitaka/config-reference/shared-file-systems.html>`_.

View File

@ -0,0 +1,46 @@
=========================================
Shared File Systems Installation Tutorial
=========================================
.. toctree::
:maxdepth: 2
get-started-with-shared-file-systems.rst
install-controller-node.rst
install-share-node.rst
verify.rst
post-install.rst
next-steps.rst
The OpenStack Shared File Systems service (manila) provides coordinated
access to shared or distributed file systems. The method in which the share is
provisioned and consumed is determined by the Shared File Systems driver, or
drivers in the case of a multi-backend configuration. There are a variety of
drivers that support NFS, CIFS, HDFS, GlusterFS, CEPHFS and other protocols
as well.
The Shared File Systems API and scheduler services typically run on the
controller nodes. Depending upon the drivers used, the share service can run
on controllers, compute nodes, or storage nodes.
.. important::
For simplicity, this guide describes configuring the Shared File Systems
service to use the ``generic`` back end with the driver handles
share server mode (DHSS) enabled that uses the `Compute service`
(`nova`), `Networking service` (`neutron`) and `Block storage service`
(`cinder`).
Networking service configuration requires the capability of networks being
attached to a public router in order to create share networks.
Before you proceed, ensure that Compute, Networking and Block storage
services are properly working. For networking service, ensure that option
2 is properly configured.
For more information, see the `Configuration Reference
<http://docs.openstack.org/mitaka/config-reference/shared-file-systems.html>`_.
This chapter assumes a working setup of OpenStack following the `OpenStack
Installation Tutorial <http://docs.openstack.org/#install-guides>`_

View File

@ -0,0 +1,56 @@
.. _manila-controller-debian:
Install and configure controller node on Debian
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure the Shared File Systems
service, code-named manila, on the controller node that runs a Debian
distribution. This service requires at least one additional share node that
manages file storage back ends.
.. include:: common/controller-node-prerequisites.rst
Install and configure components
--------------------------------
#. Install the packages:
.. code-block:: console
# apt-get install manila-api manila-scheduler python-manilaclient
#. Edit the ``/etc/manila/manila.conf`` file and complete the following
actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql+pymysql://manila:MANILA_DBPASS@controller/manila
Replace ``MANILA_DBPASS`` with the password you chose for the Shared
File Systems database.
.. include:: common/controller-node-common-configuration.rst
#. Populate the Shared File Systems database:
.. code-block:: console
# su -s /bin/sh -c "manila-manage db sync" manila
.. note::
Ignore any deprecation messages in this output.
Finalize installation
---------------------
#. Restart the Shared File Systems services:
.. code-block:: console
# service manila-scheduler restart
# service manila-api restart

View File

@ -0,0 +1,22 @@
.. _manila-controller:
Install and configure controller node
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure the Shared File Systems
service, code-named manila, on the controller node. This service requires at
least one additional share node that manages file storage back ends.
This section assumes that you already have a working OpenStack
environment with at least the following components installed:
Compute, Image Service, Identity.
Note that installation and configuration vary by distribution.
.. toctree::
:maxdepth: 1
install-controller-obs.rst
install-controller-rdo.rst
install-controller-ubuntu.rst
install-controller-debian.rst

View File

@ -0,0 +1,47 @@
.. _manila-controller-obs:
Install and configure controller node on openSUSE and SUSE Linux Enterprise
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure the Shared File Systems
service, code-named manila, on the controller node that runs openSUSE and SUSE
Linux Enterprise. This service requires at least one additional share node
that manages file storage back ends.
.. include:: common/controller-node-prerequisites.rst
Install and configure components
--------------------------------
#. Install the packages:
.. code-block:: console
# zypper install openstack-manila-api openstack-manila-scheduler python-manilaclient
#. Edit the ``/etc/manila/manila.conf`` file and complete the
following actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql+pymysql://manila:MANILA_DBPASS@controller/manila
Replace ``MANILA_DBPASS`` with the password you chose for the Shared
File Systems database.
.. include:: common/controller-node-common-configuration.rst
Finalize installation
---------------------
#. Start the Shared File Systems services and configure them to start when
the system boots:
.. code-block:: console
# systemctl enable openstack-manila-api.service openstack-manila-scheduler.service
# systemctl start openstack-manila-api.service openstack-manila-scheduler.service

View File

@ -0,0 +1,57 @@
.. _manila-controller-rdo:
Install and configure controller node on Red Hat Enterprise Linux and CentOS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure the Shared File Systems
service, code-named manila, on the controller node that runs Red Hat
Enterprise Linux or CentOS. This service requires at least one additional
share node that manages file storage back ends.
.. include:: common/controller-node-prerequisites.rst
Install and configure components
--------------------------------
#. Install the packages:
.. code-block:: console
# yum install openstack-manila python-manilaclient
#. Edit the ``/etc/manila/manila.conf`` file and complete the
following actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql+pymysql://manila:MANILA_DBPASS@controller/manila
Replace ``MANILA_DBPASS`` with the password you chose for the Shared
File Systems database.
.. include:: common/controller-node-common-configuration.rst
#. Populate the Shared File Systems database:
.. code-block:: console
# su -s /bin/sh -c "manila-manage db sync" manila
.. note::
Ignore any deprecation messages in this output.
Finalize installation
---------------------
#. Start the Shared File Systems services and configure them to start when
the system boots:
.. code-block:: console
# systemctl enable openstack-manila-api.service openstack-manila-scheduler.service
# systemctl start openstack-manila-api.service openstack-manila-scheduler.service

View File

@ -0,0 +1,64 @@
.. _manila-controller-ubuntu:
Install and configure controller node on Ubuntu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure the Shared File Systems
service, code-named manila, on the controller node that runs Ubuntu. This
service requires at least one additional share node that manages file
storage back ends.
.. include:: common/controller-node-prerequisites.rst
Install and configure components
--------------------------------
#. Install the packages:
.. code-block:: console
# apt-get install manila-api manila-scheduler python-manilaclient
#. Edit the ``/etc/manila/manila.conf`` file and complete the
following actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql+pymysql://manila:MANILA_DBPASS@controller/manila
Replace ``MANILA_DBPASS`` with the password you chose for the Shared
File Systems database.
.. include:: common/controller-node-common-configuration.rst
#. Populate the Shared File Systems database:
.. code-block:: console
# su -s /bin/sh -c "manila-manage db sync" manila
.. note::
Ignore any deprecation messages in this output.
Finalize installation
---------------------
#. Restart the Shared File Systems services:
.. code-block:: console
# service manila-scheduler restart
# service manila-api restart
#. By default, the Ubuntu packages create an SQLite database. Because this
configuration uses an SQL database server, you can remove the SQLite
database file:
.. code-block:: console
# rm -f /var/lib/manila/manila.sqlite

View File

@ -0,0 +1,91 @@
.. _share-node-install-debian:
Install and configure a share node running Debian
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure a share node for the
Shared File Systems service. For simplicity, this configuration references one
storage node with the generic driver managing the share servers. The
generic backend manages share servers using compute, networking and block
services for provisioning shares.
Note that installation and configuration vary by distribution. This section
describes the instructions for a share node running a Debian distribution.
Install and configure components
--------------------------------
#. Install the packages:
.. code-block:: console
# apt-get install manila-share python-pymysql
#. Edit the ``/etc/manila/manila.conf`` file and complete the following
actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql+pymysql://manila:MANILA_DBPASS@controller/manila
Replace ``MANILA_DBPASS`` with the password you chose for the Shared
File Systems database.
.. include:: common/share-node-common-configuration.rst
Two driver modes
----------------
.. include:: common/share-node-share-server-modes.rst
Choose one of the following options to configure the share driver:
.. include:: common/dhss-false-mode-intro.rst
Prerequisites
-------------
.. note::
Perform these steps on the storage node.
#. Install the supporting utility packages:
* Install LVM and NFS server packages:
.. code-block:: console
# apt-get install lvm2 nfs-kernel-server
.. include:: common/dhss-false-mode-configuration.rst
.. include:: common/dhss-true-mode-intro.rst
Prerequisites
-------------
Before you proceed, verify operation of the Compute, Networking, and Block
Storage services. This options requires implementation of Networking option 2
and requires installation of some Networking service components on the storage
node.
* Install the Networking service components:
.. code-block:: console
# apt-get install neutron-plugin-linuxbridge-agent
.. include:: common/dhss-true-mode-configuration.rst
Finalize installation
---------------------
#. Prepare manila-share as start/stop service. Start the Shared File Systems
service including its dependencies:
.. code-block:: console
# service manila-share restart

View File

@ -0,0 +1,21 @@
.. _share-node-install:
Install and configure a share node
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure a share node for the
Shared File Systems service.
.. Note::
The manila-share process can run in two modes, with and without handling of
share servers. In general it depends of the driver support.
Note that installation and configuration vary by distribution.
.. toctree::
:maxdepth: 1
install-share-obs.rst
install-share-rdo.rst
install-share-ubuntu.rst
install-share-debian.rst

View File

@ -0,0 +1,90 @@
.. _share-node-install-obs:
Install and configure a share node running openSUSE and SUSE Linux Enterprise
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure a share node for the
Shared File Systems service.
Note that installation and configuration vary by distribution. This section
describes the instructions for a share node running openSUSE and SUSE Linux
Enterprise.
Install and configure components
--------------------------------
#. Install the packages:
.. code-block:: console
# zypper install openstack-manila-share python-PyMySQL
#. Edit the ``/etc/manila/manila.conf`` file and complete the following
actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql+pymysql://manila:MANILA_DBPASS@controller/manila
Replace ``MANILA_DBPASS`` with the password you chose for
the Shared File Systems database.
.. include:: common/share-node-common-configuration.rst
Two driver modes
----------------
.. include:: common/share-node-share-server-modes.rst
Choose one of the following options to configure the share driver:
.. include:: common/dhss-false-mode-intro.rst
Prerequisites
-------------
.. note::
Perform these steps on the storage node.
#. Install the supporting utility packages:
* Install LVM and NFS server packages:
.. code-block:: console
# zypper install lvm2 nfs-kernel-server
.. include:: common/dhss-false-mode-configuration.rst
.. include:: common/dhss-true-mode-intro.rst
Prerequisites
-------------
Before you proceed, verify operation of the Compute, Networking, and Block
Storage services. This options requires implementation of Networking option 2
and requires installation of some Networking service components on the storage
node.
* Install the Networking service components:
.. code-block:: console
# zypper install --no-recommends openstack-neutron-linuxbridge-agent
.. include:: common/dhss-true-mode-configuration.rst
Finalize installation
---------------------
#. Prepare manila-share as start/stop service. Start the Shared File Systems
service including its dependencies and configure them to start when the
system boots:
.. code-block:: console
# systemctl enable openstack-manila-share.service tgtd.service
# systemctl start openstack-manila-share.service tgtd.service

View File

@ -0,0 +1,103 @@
.. _share-node-install-rdo:
Install and configure a share node running Red Hat Enterprise Linux and CentOS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure a share node for the
Shared File Systems service. For simplicity, this configuration references one
storage node with the generic driver managing the share servers. The
generic backend manages share servers using compute, networking and block
services for provisioning shares.
Note that installation and configuration vary by distribution. This section
describes the instructions for a share node running Red Hat Enterprise Linux
or CentOS.
Install and configure components
--------------------------------
#. Install the packages:
.. code-block:: console
# yum install openstack-manila-share python2-PyMySQL
#. Edit the ``/etc/manila/manila.conf`` file and complete the following
actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql://manila:MANILA_DBPASS@controller/manila
Replace ``MANILA_DBPASS`` with the password you chose for
the Shared File Systems database.
.. include:: common/share-node-common-configuration.rst
Two driver modes
----------------
.. include:: common/share-node-share-server-modes.rst
Choose one of the following options to configure the share driver:
.. include:: common/dhss-false-mode-intro.rst
Prerequisites
-------------
.. note::
Perform these steps on the storage node.
#. Install the supporting utility packages:
* Install LVM and NFS server packages:
.. code-block:: console
# yum install lvm2 nfs-utils nfs4-acl-tools portmap
* Start the LVM metadata service and configure it to start when the
system boots:
.. code-block:: console
# systemctl enable lvm2-lvmetad.service
# systemctl start lvm2-lvmetad.service
.. include:: common/dhss-false-mode-configuration.rst
.. include:: common/dhss-true-mode-intro.rst
Prerequisites
-------------
Before you proceed, verify operation of the Compute, Networking, and Block
Storage services. This options requires implementation of Networking option 2
and requires installation of some Networking service components on the storage
node.
* Install the Networking service components:
.. code-block:: console
# yum install openstack-neutron openstack-neutron-linuxbridge ebtables
.. include:: common/dhss-true-mode-configuration.rst
Finalize installation
---------------------
#. Prepare manila-share as start/stop service. Start the Shared File Systems
service including its dependencies and configure them to start when the
system boots:
.. code-block:: console
# systemctl enable openstack-manila-share.service target.service
# systemctl start openstack-manila-share.service target.service

View File

@ -0,0 +1,99 @@
.. _share-node-install-ubuntu:
Install and configure a share node running Ubuntu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure a share node for the
Shared File Systems service. For simplicity, this configuration references one
storage node with the generic driver managing the share servers. The
generic backend manages share servers using compute, networking and block
services for provisioning shares.
Note that installation and configuration vary by distribution. This section
describes the instructions for a share node running Ubuntu.
Install and configure components
--------------------------------
#. Install the packages:
.. code-block:: console
# apt-get install manila-share python-pymysql
#. Edit the ``/etc/manila/manila.conf`` file and complete the following
actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql+pymysql://manila:MANILA_DBPASS@controller/manila
Replace ``MANILA_DBPASS`` with the password you chose for
the Shared File Systems database.
.. include:: common/share-node-common-configuration.rst
Two driver modes
----------------
.. include:: common/share-node-share-server-modes.rst
Choose one of the following options to configure the share driver:
.. include:: common/dhss-false-mode-intro.rst
Prerequisites
-------------
.. note::
Perform these steps on the storage node.
#. Install the supporting utility packages:
* Install LVM and NFS server packages:
.. code-block:: console
# apt-get install lvm2 nfs-kernel-server
.. include:: common/dhss-false-mode-configuration.rst
.. include:: common/dhss-true-mode-intro.rst
Prerequisites
-------------
Before you proceed, verify operation of the Compute, Networking, and Block
Storage services. This options requires implementation of Networking option 2
and requires installation of some Networking service components on the storage
node.
* Install the Networking service components:
.. code-block:: console
# apt-get install neutron-plugin-linuxbridge-agent
.. include:: common/dhss-true-mode-configuration.rst
Finalize installation
---------------------
#. Prepare manila-share as start/stop service. Start the Shared File Systems
service including its dependencies:
.. code-block:: console
# service manila-share restart
#. By default, the Ubuntu packages create an SQLite database. Because this
configuration uses an SQL database server, remove the SQLite database
file:
.. code-block:: console
# rm -f /var/lib/manila/manila.sqlite

View File

@ -0,0 +1,14 @@
.. _next-steps:
==========
Next steps
==========
Your OpenStack environment now includes the Shared File Systems service.
To add more services, see the `additional documentation on installing
OpenStack services <http://docs.openstack.org/#install-guides>`_
Continue to evaluate the Shared File Systems service by creating the service
image and running the service with the correct driver mode that you chose
while configuring the share node.

View File

@ -0,0 +1,196 @@
.. _post-install:
Creating shared file systems
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Before being able to create a share, manila with the generic driver and
the DHSS mode enabled requires the definition of at least an image,
a network and a share-network for being used to create a share server.
For that `back end` configuration, the share server is an instance where
NFS/CIFS shares are served.
.. note::
This configuration automatically creates a cinder volume for every share.
The cinder volumes are attached to share servers according to the
definition of a share network.
Determine the configuration of the share server
-----------------------------------------------
#. Source the admin credentials to gain access to admin-only CLI commands:
.. code-block:: console
$ . admin-openrc.sh
#. Create a default share type before running manila-share service:
.. code-block:: console
$ manila type-create default_share_type True
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+
| ID | Name | Visibility | is_default | required_extra_specs | optional_extra_specs |
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+
| 8a35da28-0f74-490d-afff-23664ecd4f01 | default_share_type | public | - | driver_handles_share_servers : True | snapshot_support : True |
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+
#. Create a manila share server image to the Image service:
.. code-block:: console
$ glance image-create \
--copy-from http://tarballs.openstack.org/manila-image-elements/images/manila-service-image-master.qcow2 \
--name "manila-service-image" \
--disk-format qcow2 \
--container-format bare \
--visibility public --progress
[=============================>] 100%
+------------------+--------------------------------------+
| Property | Value |
+------------------+--------------------------------------+
| checksum | 48a08e746cf0986e2bc32040a9183445 |
| container_format | bare |
| created_at | 2016-01-26T19:52:24Z |
| disk_format | qcow2 |
| id | 1fc7f29e-8fe6-44ef-9c3c-15217e83997c |
| min_disk | 0 |
| min_ram | 0 |
| name | manila-service-image |
| owner | e2c965830ecc4162a002bf16ddc91ab7 |
| protected | False |
| size | 306577408 |
| status | active |
| tags | [] |
| updated_at | 2016-01-26T19:52:28Z |
| virtual_size | None |
| visibility | public |
+------------------+--------------------------------------+
#. List available networks in order to get id and subnets of the private
network:
.. code-block:: console
$ neutron net-list
+--------------------------------------+---------+----------------------------------------------------+
| id | name | subnets |
+--------------------------------------+---------+----------------------------------------------------+
| 0e62efcd-8cee-46c7-b163-d8df05c3c5ad | public | 5cc70da8-4ee7-4565-be53-b9c011fca011 10.3.31.0/24 |
| 7c6f9b37-76b4-463e-98d8-27e5686ed083 | private | 3482f524-8bff-4871-80d4-5774c2730728 172.16.1.0/24 |
+--------------------------------------+---------+----------------------------------------------------+
#. Source the ``demo`` credentials to perform
the following steps as a non-administrative project:
.. code-block:: console
$ . demo-openrc.sh
.. code-block:: console
$ manila share-network-create --name demo-share-network1 \
--neutron-net-id PRIVATE_NETWORK_ID \
--neutron-subnet-id PRIVATE_NETWORK_SUBNET_ID
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| name | demo-share-network1 |
| segmentation_id | None |
| created_at | 2016-01-26T20:03:41.877838 |
| neutron_subnet_id | 3482f524-8bff-4871-80d4-5774c2730728 |
| updated_at | None |
| network_type | None |
| neutron_net_id | 7c6f9b37-76b4-463e-98d8-27e5686ed083 |
| ip_version | None |
| nova_net_id | None |
| cidr | None |
| project_id | e2c965830ecc4162a002bf16ddc91ab7 |
| id | 58b2f0e6-5509-4830-af9c-97f525a31b14 |
| description | None |
+-------------------+--------------------------------------+
Create a share
--------------
#. Create a NFS share using the share network:
.. code-block:: console
$ manila create NFS 1 --name demo-share1 --share-network demo-share-network1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | None |
| share_type_name | None |
| description | None |
| availability_zone | None |
| share_network_id | None |
| export_locations | [] |
| host | None |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 016ca18f-bdd5-48e1-88c0-782e4c1aa28c |
| size | 1 |
| name | demo-share1 |
| share_type | None |
| created_at | 2016-01-26T20:08:50.502877 |
| export_location | None |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 48e8c35b2ac6495d86d4be61658975e7 |
| metadata | {} |
+-----------------------------+--------------------------------------+
#. After some time, the share status should change from ``creating``
to ``available``:
.. code-block:: console
$ manila list
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+---------------------------------------------------------------+-----------------------------+-------------------+
| ID | Name | Size | Share Proto | Status | Is Public | Share Type | Export location | Host | Availability Zone |
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+---------------------------------------------------------------+-----------------------------+-------------------+
| 5f8a0574-a95e-40ff-b898-09fd8d6a1fac | demo-share1 | 1 | NFS | available | False | 8a35da28-0f74-490d-afff-23664ecd4f01 | 10.254.0.6:/shares/share-0bfd69a1-27f0-4ef5-af17-7cd50bce6550 | storagenode@generic#GENERIC | nova |
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+---------------------------------------------------------------+-----------------------------+-------------------+
#. Configure user access to the new share before attempting to mount it via
the network:
.. important ::
The image used for launching an instance and mounting a share must have
the NFS packages provided by the distro. Example: The cirros image
created at the image service section is not enough.
.. important ::
Use an instance that is connected to the private network used to create
the share-network.
.. code-block:: console
$ manila access-allow demo-share1 ip INSTANCE_PRIVATE_NETWORK_IP
Mount the share from an instance
--------------------------------
#. Create a folder where the mount will be placed:
.. code-block:: console
$ mkdir ~/test_folder
#. Mount the NFS share in the instance using the export location of the share:
.. code-block:: console
$ mount -v 10.254.0.6:/shares/share-0bfd69a1-27f0-4ef5-af17-7cd50bce6550 ~/test_folder
For more information about how to manage shares, see the
`OpenStack User Guide
<http://docs.openstack.org/user-guide/index.html>`__.

View File

@ -0,0 +1,29 @@
.. _verify:
Verify operation
~~~~~~~~~~~~~~~~
Verify operation of the Shared File Systems service.
.. note::
Perform these commands on the controller node.
#. Source the ``admin`` credentials to gain access to
admin-only CLI commands:
.. code-block:: console
$ . admin-openrc.sh
#. List service components to verify successful launch of each process:
.. code-block:: console
$ manila service-list
+------------------+----------------+------+---------+-------+----------------------------+-----------------+
| Binary | Host | Zone | Status | State | Updated_at | Disabled Reason |
+------------------+----------------+------+---------+-------+----------------------------+-----------------+
| manila-scheduler | controller | nova | enabled | up | 2014-10-18T01:30:54.000000 | None |
| manila-share | share1@generic | nova | enabled | up | 2014-10-18T01:30:57.000000 | None |
+------------------+----------------+------+---------+-------+----------------------------+-----------------+

View File

@ -18,6 +18,10 @@ commands =
commands = sphinx-build -a -E -W -d releasenotes/build/doctrees \ commands = sphinx-build -a -E -W -d releasenotes/build/doctrees \
-b html releasenotes/source releasenotes/build/html -b html releasenotes/source releasenotes/build/html
[testenv:install-guide]
# builds to install-guide/build/html
commands = sphinx-build -a -E -W -d install-guide/build/doctrees -b html install-guide/source install-guide/build/html
[testenv:debug] [testenv:debug]
commands = oslo_debug_helper {posargs} commands = oslo_debug_helper {posargs}
@ -94,7 +98,7 @@ commands = alembic -c manila/db/migrations/alembic.ini revision -m ""{posargs}
# Following checks are ignored on purpose: # Following checks are ignored on purpose:
ignore = ignore =
builtins = _ builtins = _
exclude = .git,.tox,.testrepository,.venv,build,cover,dist,doc,*egg,api-ref/build exclude = .git,.tox,.testrepository,.venv,build,cover,dist,doc,*egg,api-ref/build,*/source/conf.py
[hacking] [hacking]
import_exceptions = import_exceptions =