# Plugin file for enabling manila services # ---------------------------------------- # Save trace setting XTRACE=$(set +o | grep xtrace) set -o xtrace # Entry Points # ------------ function _clean_share_group { local vg=$1 local vg_prefix=$2 # Clean out existing shares for lv in `sudo lvs --noheadings -o lv_name $vg`; do # vg_prefix prefixes the LVs we want if [[ "${lv#$vg_prefix}" != "$lv" ]]; then sudo umount -f $MANILA_MNT_DIR/$lv sudo lvremove -f $vg/$lv sudo rm -rf $MANILA_MNT_DIR/$lv fi done } function _clean_manila_lvm_backing_file { local vg=$1 # if there is no logical volume left, it's safe to attempt a cleanup # of the backing file if [ -z "`sudo lvs --noheadings -o lv_name $vg`" ]; then # if the backing physical device is a loop device, it was probably setup by devstack VG_DEV=$(sudo losetup -j $DATA_DIR/${vg}-backing-file | awk -F':' '/backing-file/ { print $1 }') if [[ -n "$VG_DEV" ]]; then sudo losetup -d $VG_DEV rm -f $DATA_DIR/${vg}-backing-file fi fi } function _clean_zfsonlinux_data { for filename in "$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/*; do if [[ $(sudo zpool list | grep $filename) ]]; then echo "Destroying zpool named $filename" sudo zpool destroy -f $filename file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR$filename" echo "Destroying file named $file" rm -f $file fi done } # cleanup_manila - Remove residual data files, anything left over from previous # runs that a clean run would need to clean up function cleanup_manila { # All stuff, that are created by share drivers will be cleaned up by other services. _clean_share_group $SHARE_GROUP $SHARE_NAME_PREFIX _clean_manila_lvm_backing_file $SHARE_GROUP _clean_zfsonlinux_data } # configure_default_backends - configures default Manila backends with generic driver. function configure_default_backends { # Configure two default backends with generic drivers onboard for group_name in $MANILA_BACKEND1_CONFIG_GROUP_NAME $MANILA_BACKEND2_CONFIG_GROUP_NAME; do iniset $MANILA_CONF $group_name share_driver $SHARE_DRIVER if [ "$MANILA_BACKEND1_CONFIG_GROUP_NAME" == "$group_name" ]; then iniset $MANILA_CONF $group_name share_backend_name $MANILA_SHARE_BACKEND1_NAME else iniset $MANILA_CONF $group_name share_backend_name $MANILA_SHARE_BACKEND2_NAME fi iniset $MANILA_CONF $group_name path_to_public_key $MANILA_PATH_TO_PUBLIC_KEY iniset $MANILA_CONF $group_name path_to_private_key $MANILA_PATH_TO_PRIVATE_KEY iniset $MANILA_CONF $group_name service_image_name $MANILA_SERVICE_IMAGE_NAME iniset $MANILA_CONF $group_name service_instance_user $MANILA_SERVICE_INSTANCE_USER iniset $MANILA_CONF $group_name driver_handles_share_servers True if [ "$SHARE_DRIVER" == $MANILA_CONTAINER_DRIVER ]; then iniset $MANILA_CONF $group_name network_api_class $MANILA_NETWORK_API_CLASS iniset $MANILA_CONF $group_name neutron_host_id $(hostname) iniset $MANILA_CONF $group_name neutron_vnic_type $MANILA_NEUTRON_VNIC_TYPE fi if [ $(trueorfalse False MANILA_USE_SERVICE_INSTANCE_PASSWORD) == True ]; then iniset $MANILA_CONF $group_name service_instance_password $MANILA_SERVICE_INSTANCE_PASSWORD fi done } # set_config_opts - this allows to set any config opt to any config group, # parsing env vars by prefix special 'MANILA_OPTGROUP_'. function set_config_opts { # expects only one param - name of config group(s) as list separated by commas GROUP_NAMES=$1 if [[ -n "$GROUP_NAMES" ]]; then for be in ${GROUP_NAMES//,/ }; do # get backend_specific opt values prefix=MANILA_OPTGROUP_$be\_ ( set -o posix ; set ) | grep ^$prefix | while read -r line ; do # parse it to opt names and values opt=${line#$prefix} opt_name=${opt%%=*} opt_value=${opt##*=} iniset $MANILA_CONF $be $opt_name $opt_value done done fi } # set_cinder_quotas - Sets Cinder quotas, that is useful for generic driver, # which uses Cinder volumes and snapshots. function set_cinder_quotas { # Update Cinder configuration to make sure default quotas are enough # for Manila using Generic driver with parallel testing. if is_service_enabled cinder; then if [[ ! "$CINDER_CONF" ]]; then CINDER_CONF=/etc/cinder/cinder.conf fi iniset $CINDER_CONF DEFAULT quota_volumes 50 iniset $CINDER_CONF DEFAULT quota_snapshots 50 iniset $CINDER_CONF DEFAULT quota_gigabytes 1000 fi } # configure_manila - Set config files, create data dirs, etc function configure_manila { if [[ ! -d $MANILA_CONF_DIR ]]; then sudo mkdir -p $MANILA_CONF_DIR fi sudo chown $STACK_USER $MANILA_CONF_DIR cp -p $MANILA_DIR/etc/manila/policy.json $MANILA_CONF_DIR # Set the paths of certain binaries MANILA_ROOTWRAP=$(get_rootwrap_location manila) # If Manila ships the new rootwrap filters files, deploy them # (owned by root) and add a parameter to $MANILA_ROOTWRAP ROOTWRAP_MANILA_SUDOER_CMD="$MANILA_ROOTWRAP" if [[ -d $MANILA_DIR/etc/manila/rootwrap.d ]]; then # Wipe any existing rootwrap.d files first if [[ -d $MANILA_CONF_DIR/rootwrap.d ]]; then sudo rm -rf $MANILA_CONF_DIR/rootwrap.d fi # Deploy filters to /etc/manila/rootwrap.d sudo mkdir -m 755 $MANILA_CONF_DIR/rootwrap.d sudo cp $MANILA_DIR/etc/manila/rootwrap.d/*.filters $MANILA_CONF_DIR/rootwrap.d sudo chown -R root:root $MANILA_CONF_DIR/rootwrap.d sudo chmod 644 $MANILA_CONF_DIR/rootwrap.d/* # Set up rootwrap.conf, pointing to /etc/manila/rootwrap.d sudo cp $MANILA_DIR/etc/manila/rootwrap.conf $MANILA_CONF_DIR/ sudo sed -e "s:^filters_path=.*$:filters_path=$MANILA_CONF_DIR/rootwrap.d:" -i $MANILA_CONF_DIR/rootwrap.conf sudo chown root:root $MANILA_CONF_DIR/rootwrap.conf sudo chmod 0644 $MANILA_CONF_DIR/rootwrap.conf # Specify rootwrap.conf as first parameter to manila-rootwrap MANILA_ROOTWRAP="$MANILA_ROOTWRAP $MANILA_CONF_DIR/rootwrap.conf" ROOTWRAP_MANILA_SUDOER_CMD="$MANILA_ROOTWRAP *" fi TEMPFILE=`mktemp` echo "$USER ALL=(root) NOPASSWD: $ROOTWRAP_MANILA_SUDOER_CMD" >$TEMPFILE chmod 0440 $TEMPFILE sudo chown root:root $TEMPFILE sudo mv $TEMPFILE /etc/sudoers.d/manila-rootwrap cp $MANILA_DIR/etc/manila/api-paste.ini $MANILA_API_PASTE_INI # Remove old conf file if exists rm -f $MANILA_CONF configure_auth_token_middleware $MANILA_CONF manila $MANILA_AUTH_CACHE_DIR iniset $MANILA_CONF DEFAULT auth_strategy keystone iniset $MANILA_CONF DEFAULT debug True iniset $MANILA_CONF DEFAULT scheduler_driver $MANILA_SCHEDULER_DRIVER iniset $MANILA_CONF DEFAULT share_name_template ${SHARE_NAME_PREFIX}%s iniset $MANILA_CONF DATABASE connection `database_connection_url manila` iniset $MANILA_CONF DATABASE max_pool_size 40 iniset $MANILA_CONF DEFAULT api_paste_config $MANILA_API_PASTE_INI iniset $MANILA_CONF DEFAULT rootwrap_config $MANILA_CONF_DIR/rootwrap.conf iniset $MANILA_CONF DEFAULT osapi_share_extension manila.api.contrib.standard_extensions iniset $MANILA_CONF DEFAULT state_path $MANILA_STATE_PATH iniset $MANILA_CONF DEFAULT default_share_type $MANILA_DEFAULT_SHARE_TYPE if ! [[ -z $MANILA_SHARE_MIGRATION_PERIOD_TASK_INTERVAL ]]; then iniset $MANILA_CONF DEFAULT migration_driver_continue_update_interval $MANILA_SHARE_MIGRATION_PERIOD_TASK_INTERVAL fi if ! [[ -z $MANILA_DATA_COPY_CHECK_HASH ]]; then iniset $MANILA_CONF DEFAULT check_hash $MANILA_DATA_COPY_CHECK_HASH fi iniset $MANILA_CONF DEFAULT enabled_share_protocols $MANILA_ENABLED_SHARE_PROTOCOLS iniset $MANILA_CONF oslo_concurrency lock_path $MANILA_LOCK_PATH iniset $MANILA_CONF DEFAULT wsgi_keep_alive False iniset $MANILA_CONF DEFAULT lvm_share_volume_group $SHARE_GROUP # Set the replica_state_update_interval iniset $MANILA_CONF DEFAULT replica_state_update_interval $MANILA_REPLICA_STATE_UPDATE_INTERVAL if is_service_enabled neutron; then configure_auth_token_middleware $MANILA_CONF neutron $MANILA_AUTH_CACHE_DIR neutron fi if is_service_enabled nova; then configure_auth_token_middleware $MANILA_CONF nova $MANILA_AUTH_CACHE_DIR nova fi if is_service_enabled cinder; then configure_auth_token_middleware $MANILA_CONF cinder $MANILA_AUTH_CACHE_DIR cinder fi # Note: set up config group does not mean that this backend will be enabled. # To enable it, specify its name explicitly using "enabled_share_backends" opt. configure_default_backends default_backends=$MANILA_BACKEND1_CONFIG_GROUP_NAME if [ "$MANILA_MULTI_BACKEND" = "True" ]; then default_backends+=,$MANILA_BACKEND2_CONFIG_GROUP_NAME fi if [ ! $MANILA_ENABLED_BACKENDS ]; then # If $MANILA_ENABLED_BACKENDS is not set, use configured backends by default export MANILA_ENABLED_BACKENDS=$default_backends fi iniset $MANILA_CONF DEFAULT enabled_share_backends $MANILA_ENABLED_BACKENDS if [ ! -f $MANILA_PATH_TO_PRIVATE_KEY ]; then ssh-keygen -N "" -t rsa -f $MANILA_PATH_TO_PRIVATE_KEY; fi iniset $MANILA_CONF DEFAULT manila_service_keypair_name $MANILA_SERVICE_KEYPAIR_NAME if is_service_enabled tls-proxy; then # Set the service port for a proxy to take the original iniset $MANILA_CONF DEFAULT osapi_share_listen_port $MANILA_SERVICE_PORT_INT fi if [ "$SYSLOG" != "False" ]; then iniset $MANILA_CONF DEFAULT use_syslog True fi iniset_rpc_backend manila $MANILA_CONF DEFAULT if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then # Add color to logging output iniset $MANILA_CONF DEFAULT logging_context_format_string \ "%(asctime)s.%(msecs)d %(color)s%(levelname)s %(name)s [%(request_id)s %(user_id)s %(project_id)s%(color)s] %(instance)s%(color)s%(message)s" iniset $MANILA_CONF DEFAULT logging_default_format_string \ "%(asctime)s.%(msecs)d %(color)s%(levelname)s %(name)s [-%(color)s] %(instance)s%(color)s%(message)s" iniset $MANILA_CONF DEFAULT logging_debug_format_suffix \ "from (pid=%(process)d) %(funcName)s %(pathname)s:%(lineno)d" iniset $MANILA_CONF DEFAULT logging_exception_prefix \ "%(color)s%(asctime)s.%(msecs)d TRACE %(name)s %(instance)s" fi MANILA_CONFIGURE_GROUPS=${MANILA_CONFIGURE_GROUPS:-"$MANILA_ENABLED_BACKENDS"} set_config_opts $MANILA_CONFIGURE_GROUPS set_config_opts DEFAULT } function create_manila_service_keypair { if is_service_enabled nova; then local keypair_exists=$( openstack keypair list | grep " $MANILA_SERVICE_KEYPAIR_NAME " ) if [[ -z $keypair_exists ]]; then openstack keypair create $MANILA_SERVICE_KEYPAIR_NAME --public-key $MANILA_PATH_TO_PUBLIC_KEY fi fi } function is_driver_enabled { driver_name=$1 for BE in ${MANILA_ENABLED_BACKENDS//,/ }; do share_driver=$(iniget $MANILA_CONF $BE share_driver) if [ "$share_driver" == "$driver_name" ]; then return 0 fi done return 1 } # create_service_share_servers - creates service Nova VMs, one per generic # driver, and only if it is configured to mode without handling of share servers. function create_service_share_servers { private_net_id=$(openstack network show $PRIVATE_NETWORK_NAME -f value -c id) created_admin_network=false for BE in ${MANILA_ENABLED_BACKENDS//,/ }; do driver_handles_share_servers=$(iniget $MANILA_CONF $BE driver_handles_share_servers) share_driver=$(iniget $MANILA_CONF $BE share_driver) generic_driver='manila.share.drivers.generic.GenericShareDriver' if [[ $share_driver == $generic_driver ]]; then if [[ $(trueorfalse False driver_handles_share_servers) == False ]]; then vm_name='manila_service_share_server_'$BE local vm_exists=$( openstack server list --all-projects | grep " $vm_name " ) if [[ -z $vm_exists ]]; then openstack server create $vm_name \ --flavor $MANILA_SERVICE_VM_FLAVOR_NAME \ --image $MANILA_SERVICE_IMAGE_NAME \ --nic net-id=$private_net_id \ --security-group $MANILA_SERVICE_SECGROUP \ --key-name $MANILA_SERVICE_KEYPAIR_NAME fi vm_id=$(openstack server show $vm_name -f value -c id) floating_ip=$(openstack floating ip create $PUBLIC_NETWORK_NAME --subnet $PUBLIC_SUBNET_NAME | grep 'floating_ip_address' | get_field 2) openstack server add floating ip $vm_name $floating_ip iniset $MANILA_CONF $BE service_instance_name_or_id $vm_id iniset $MANILA_CONF $BE service_net_name_or_ip $floating_ip iniset $MANILA_CONF $BE tenant_net_name_or_ip $PRIVATE_NETWORK_NAME else if is_service_enabled neutron; then if ! [[ -z $MANILA_ADMIN_NET_RANGE ]]; then if [ $created_admin_network == false ]; then project_id=$(openstack project show $SERVICE_PROJECT_NAME -c id -f value) local admin_net_id=$( openstack network show admin_net -f value -c id ) if [[ -z $admin_net_id ]]; then openstack network create admin_net --project $project_id admin_net_id=$(openstack network show admin_net -f value -c id) fi local admin_subnet_id=$( openstack subnet show admin_subnet -f value -c id ) if [[ -z $admin_subnet_id ]]; then openstack subnet create admin_subnet --project $project_id --ip-version 4 --network $admin_net_id --gateway None --subnet-range $MANILA_ADMIN_NET_RANGE admin_subnet_id=$(openstack subnet show admin_subnet -f value -c id) fi created_admin_network=true fi iniset $MANILA_CONF $BE admin_network_id $admin_net_id iniset $MANILA_CONF $BE admin_subnet_id $admin_subnet_id fi fi fi fi done configure_data_service_generic_driver } function configure_data_service_generic_driver { enabled_backends=(${MANILA_ENABLED_BACKENDS//,/ }) share_driver=$(iniget $MANILA_CONF ${enabled_backends[0]} share_driver) generic_driver='manila.share.drivers.generic.GenericShareDriver' if [[ $share_driver == $generic_driver ]]; then driver_handles_share_servers=$(iniget $MANILA_CONF ${enabled_backends[0]} driver_handles_share_servers) if [[ $(trueorfalse False driver_handles_share_servers) == False ]]; then iniset $MANILA_CONF DEFAULT data_node_access_ip $PUBLIC_NETWORK_GATEWAY else if ! [[ -z $MANILA_DATA_NODE_IP ]]; then iniset $MANILA_CONF DEFAULT data_node_access_ip $MANILA_DATA_NODE_IP fi fi fi } # create_manila_service_flavor - creates flavor, that will be used by backends # with configured generic driver to boot Nova VMs with. function create_manila_service_flavor { if is_service_enabled nova; then local flavor_exists=$( openstack flavor list | grep " $MANILA_SERVICE_VM_FLAVOR_NAME " ) if [[ -z $flavor_exists ]]; then # Create flavor for Manila's service VM openstack flavor create \ $MANILA_SERVICE_VM_FLAVOR_NAME \ --id $MANILA_SERVICE_VM_FLAVOR_REF \ --ram $MANILA_SERVICE_VM_FLAVOR_RAM \ --disk $MANILA_SERVICE_VM_FLAVOR_DISK \ --vcpus $MANILA_SERVICE_VM_FLAVOR_VCPUS fi fi } # create_manila_service_image - creates image, that will be used by backends # with configured generic driver to boot Nova VMs from. function create_manila_service_image { if is_service_enabled nova; then TOKEN=$(openstack token issue -c id -f value) local image_exists=$( openstack image list | grep " $MANILA_SERVICE_IMAGE_NAME " ) if [[ -z $image_exists ]]; then # Download Manila's image if is_service_enabled g-reg; then upload_image $MANILA_SERVICE_IMAGE_URL $TOKEN fi fi fi } # create_manila_service_secgroup - creates security group that is used by # Nova VMs when generic driver is configured. function create_manila_service_secgroup { # Create a secgroup if ! openstack security group list | grep -q $MANILA_SERVICE_SECGROUP; then openstack security group create $MANILA_SERVICE_SECGROUP --description "$MANILA_SERVICE_SECGROUP description" if ! timeout 30 sh -c "while ! openstack security group list | grep -q $MANILA_SERVICE_SECGROUP; do sleep 1; done"; then echo "Security group not created" exit 1 fi fi # Configure Security Group Rules if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q icmp; then openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol icmp fi if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " tcp .* 22 "; then openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol tcp --dst-port 22 fi if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " tcp .* 2049 "; then openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol tcp --dst-port 2049 fi if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " udp .* 2049 "; then openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol udp --dst-port 2049 fi if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " udp .* 445 "; then openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol udp --dst-port 445 fi if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " tcp .* 445 "; then openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol tcp --dst-port 445 fi if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " tcp .* 139 "; then openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol tcp --dst-port 137:139 fi if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " udp .* 139 "; then openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol udp --dst-port 137:139 fi # List secgroup rules openstack security group rule list $MANILA_SERVICE_SECGROUP } # create_manila_accounts - Set up common required manila accounts function create_manila_accounts { create_service_user "manila" # Set up Manila v1 service and endpoint get_or_create_service "manila" "share" "Manila Shared Filesystem Service" get_or_create_endpoint "share" "$REGION_NAME" \ "$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v1/\$(tenant_id)s" \ "$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v1/\$(tenant_id)s" \ "$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v1/\$(tenant_id)s" # Set up Manila v2 service and endpoint get_or_create_service "manilav2" "sharev2" "Manila Shared Filesystem Service V2" get_or_create_endpoint "sharev2" "$REGION_NAME" \ "$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v2/\$(tenant_id)s" \ "$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v2/\$(tenant_id)s" \ "$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v2/\$(tenant_id)s" } # create_default_share_type - create share type that will be set as default. function create_default_share_type { echo "Waiting for Manila API to start..." if ! wait_for_service 60 $MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT; then die $LINENO "Manila did not start" fi enabled_backends=(${MANILA_ENABLED_BACKENDS//,/ }) driver_handles_share_servers=$(iniget $MANILA_CONF ${enabled_backends[0]} driver_handles_share_servers) local type_exists=$( manila type-list | grep " $MANILA_DEFAULT_SHARE_TYPE " ) if [[ -z $type_exists ]]; then local command_args="$MANILA_DEFAULT_SHARE_TYPE $driver_handles_share_servers" #if is_driver_enabled $MANILA_CONTAINER_DRIVER; then # # TODO(aovchinnikov): Remove this condition when Container driver supports # # snapshots # command_args="$command_args --snapshot_support false" #fi manila type-create $command_args fi if [[ $MANILA_DEFAULT_SHARE_TYPE_EXTRA_SPECS ]]; then manila type-key $MANILA_DEFAULT_SHARE_TYPE set $MANILA_DEFAULT_SHARE_TYPE_EXTRA_SPECS fi } # create_custom_share_types - create share types suitable for both possible # driver modes with names "dhss_true" and "dhss_false". function create_custom_share_types { manila type-create dhss_true True if [[ $MANILA_DHSS_TRUE_SHARE_TYPE_EXTRA_SPECS ]]; then manila type-key dhss_true set $MANILA_DHSS_TRUE_SHARE_TYPE_EXTRA_SPECS fi manila type-create dhss_false False if [[ $MANILA_DHSS_FALSE_SHARE_TYPE_EXTRA_SPECS ]]; then manila type-key dhss_false set $MANILA_DHSS_FALSE_SHARE_TYPE_EXTRA_SPECS fi } # configure_backing_file - Set up backing file for LVM function configure_backing_file { if ! sudo vgs $SHARE_GROUP; then if [ "$CONFIGURE_BACKING_FILE" = "True" ]; then SHARE_BACKING_FILE=${SHARE_BACKING_FILE:-$DATA_DIR/${SHARE_GROUP}-backing-file} # Only create if the file doesn't already exists [[ -f $SHARE_BACKING_FILE ]] || truncate -s $SHARE_BACKING_FILE_SIZE $SHARE_BACKING_FILE DEV=`sudo losetup -f --show $SHARE_BACKING_FILE` else DEV=$SHARE_BACKING_FILE fi # Only create if the loopback device doesn't contain $SHARE_GROUP if ! sudo vgs $SHARE_GROUP; then sudo vgcreate $SHARE_GROUP $DEV; fi fi mkdir -p $MANILA_STATE_PATH/shares mkdir -p /tmp/shares } # init_manila - Initializes database and creates manila dir if absent function init_manila { if is_service_enabled $DATABASE_BACKENDS; then # (re)create manila database recreate_database manila $MANILA_BIN_DIR/manila-manage db sync if [[ $(trueorfalse False MANILA_USE_DOWNGRADE_MIGRATIONS) == True ]]; then # Use both - upgrade and downgrade migrations to verify that # downgrade migrations do not break structure of Manila database. $MANILA_BIN_DIR/manila-manage db downgrade $MANILA_BIN_DIR/manila-manage db sync fi # Display version as debug-action (see bug/1473400) $MANILA_BIN_DIR/manila-manage db version fi if [ "$SHARE_DRIVER" == "manila.share.drivers.lvm.LVMShareDriver" ]; then if is_service_enabled m-shr; then # Configure a default volume group called '`lvm-shares`' for the share # service if it does not yet exist. If you don't wish to use a file backed # volume group, create your own volume group called ``stack-volumes`` before # invoking ``stack.sh``. # # By default, the backing file is 8G in size, and is stored in ``/opt/stack/data``. configure_backing_file fi elif [ "$SHARE_DRIVER" == $MANILA_CONTAINER_DRIVER ]; then if is_service_enabled m-shr; then SHARE_GROUP=$MANILA_CONTAINER_VOLUME_GROUP_NAME configure_backing_file fi elif [ "$SHARE_DRIVER" == "manila.share.drivers.zfsonlinux.driver.ZFSonLinuxShareDriver" ]; then if is_service_enabled m-shr; then mkdir -p $MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR file_counter=0 for BE in ${MANILA_ENABLED_BACKENDS//,/ }; do if [[ $file_counter == 0 ]]; then # NOTE(vponomaryov): create two pools for first ZFS backend # to cover different use cases that are supported by driver: # - Support of more than one zpool for share backend. # - Support of nested datasets. local first_file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/alpha local second_file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/betta truncate -s $MANILA_ZFSONLINUX_ZPOOL_SIZE $first_file truncate -s $MANILA_ZFSONLINUX_ZPOOL_SIZE $second_file sudo zpool create alpha $first_file sudo zpool create betta $second_file # Create subdir (nested dataset) for second pool sudo zfs create betta/subdir iniset $MANILA_CONF $BE zfs_zpool_list alpha,betta/subdir elif [[ $file_counter == 1 ]]; then local file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/gamma truncate -s $MANILA_ZFSONLINUX_ZPOOL_SIZE $file sudo zpool create gamma $file iniset $MANILA_CONF $BE zfs_zpool_list gamma else local filename=file"$file_counter" local file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/"$filename" truncate -s $MANILA_ZFSONLINUX_ZPOOL_SIZE $file sudo zpool create $filename $file iniset $MANILA_CONF $BE zfs_zpool_list $filename fi iniset $MANILA_CONF $BE zfs_share_export_ip $MANILA_ZFSONLINUX_SHARE_EXPORT_IP iniset $MANILA_CONF $BE zfs_service_ip $MANILA_ZFSONLINUX_SERVICE_IP iniset $MANILA_CONF $BE zfs_dataset_creation_options $MANILA_ZFSONLINUX_DATASET_CREATION_OPTIONS iniset $MANILA_CONF $BE zfs_use_ssh $MANILA_ZFSONLINUX_USE_SSH iniset $MANILA_CONF $BE zfs_ssh_username $MANILA_ZFSONLINUX_SSH_USERNAME iniset $MANILA_CONF $BE replication_domain $MANILA_ZFSONLINUX_REPLICATION_DOMAIN iniset $MANILA_CONF $BE driver_handles_share_servers False let "file_counter=file_counter+1" done # Install the server's SSH key in our known_hosts file eval STACK_HOME=~$STACK_USER ssh-keyscan ${MANILA_ZFSONLINUX_SERVICE_IP} >> $STACK_HOME/.ssh/known_hosts # If the server is this machine, setup trust for ourselves (otherwise you're on your own) if [ "$MANILA_ZFSONLINUX_SERVICE_IP" = "127.0.0.1" ] || [ "$MANILA_ZFSONLINUX_SERVICE_IP" = "localhost" ] ; then # Trust our own SSH keys eval SSH_USER_HOME=~$MANILA_ZFSONLINUX_SSH_USERNAME cat $STACK_HOME/.ssh/*.pub >> $SSH_USER_HOME/.ssh/authorized_keys # Give ssh user sudo access echo "$MANILA_ZFSONLINUX_SSH_USERNAME ALL=(ALL) NOPASSWD: ALL" | sudo tee -a /etc/sudoers > /dev/null fi fi fi # Create cache dir sudo mkdir -p $MANILA_AUTH_CACHE_DIR sudo chown $STACK_USER $MANILA_AUTH_CACHE_DIR rm -f $MANILA_AUTH_CACHE_DIR/* } # check_nfs_kernel_service_state_ubuntu- Make sure nfsd is running function check_nfs_kernel_service_state_ubuntu { # (aovchinnikov): Workaround for nfs-utils bug 1052264 if [[ $(sudo service nfs-kernel-server status &> /dev/null || echo 'fail') == 'fail' ]]; then echo "Apparently nfsd is not running. Trying to fix that." sudo mkdir -p "/media/nfsdonubuntuhelper" # (aovchinnikov): shell wrapping is needed for cases when a file to be written # is owned by root. sudo sh -c "echo '/media/nfsdonubuntuhelper 127.0.0.1(ro)' >> /etc/exports" sudo service nfs-kernel-server start fi if [[ $(sudo service nfs-kernel-server status &> /dev/null || echo 'fail') == 'fail' ]]; then echo "Failed to start nfsd. Exiting." exit 1 fi } function _install_nfs_and_samba { if is_ubuntu; then install_package nfs-kernel-server nfs-common samba check_nfs_kernel_service_state_ubuntu elif is_fedora; then install_package nfs-utils nfs-utils-lib samba elif is_suse; then install_package nfs-kernel-server nfs-utils samba else: echo "This distro is not supported. Skipping step of NFS and Samba installation." fi } # install_manila - Collect source and prepare function install_manila { git_clone $MANILACLIENT_REPO $MANILACLIENT_DIR $MANILACLIENT_BRANCH setup_develop $MANILACLIENT_DIR setup_develop $MANILA_DIR if is_service_enabled m-shr; then _install_nfs_and_samba if [ "$SHARE_DRIVER" == "manila.share.drivers.zfsonlinux.driver.ZFSonLinuxShareDriver" ]; then if [[ $(sudo zfs list &> /dev/null && sudo zpool list &> /dev/null || echo 'absent') == 'absent' ]]; then # ZFS not found, try to install it if is_ubuntu; then if [[ $(lsb_release -s -d) == *"14.04"* ]]; then # Trusty sudo apt-get install -y software-properties-common sudo apt-add-repository --yes ppa:zfs-native/stable # Workaround for bug #1609696 sudo apt-mark hold grub* sudo apt-get -y -q update && sudo apt-get -y -q upgrade # Workaround for bug #1609696 sudo apt-mark unhold grub* sudo apt-get install -y linux-headers-generic sudo apt-get install -y build-essential sudo apt-get install -y ubuntu-zfs elif [[ $(lsb_release -s -d) == *"16.04"* ]]; then # Xenial sudo apt-get install -y zfsutils-linux else echo "Only 'Trusty' and 'Xenial' releases of Ubuntu are supported." exit 1 fi else echo "Manila Devstack plugin supports installation "\ "of ZFS packages only for 'Ubuntu' distros. "\ "Please, install it first by other means or add its support "\ "for your distro." exit 1 fi sudo modprobe zfs sudo modprobe zpool fi check_nfs_kernel_service_state_ubuntu elif [ "$SHARE_DRIVER" == $MANILA_CONTAINER_DRIVER ]; then if is_ubuntu; then echo "Installing docker...." install_docker_ubuntu echo "Importing docker image" import_docker_service_image_ubuntu else echo "Manila Devstack plugin does not support Container Driver on "\ " distros other than Ubuntu." exit 1 fi fi fi } #configure_samba - Configure node as Samba server function configure_samba { if [ "$SHARE_DRIVER" == "manila.share.drivers.lvm.LVMShareDriver" ]; then # TODO(vponomaryov): add here condition for ZFSonLinux driver too # when it starts to support SAMBA samba_daemon_name=smbd if is_service_enabled m-shr; then if is_fedora; then samba_daemon_name=smb fi sudo service $samba_daemon_name restart || echo "Couldn't restart '$samba_daemon_name' service" fi if [[ -e /usr/share/samba/smb.conf ]]; then sudo cp /usr/share/samba/smb.conf $SMB_CONF fi sudo chown $STACK_USER -R /etc/samba iniset $SMB_CONF global include registry iniset $SMB_CONF global security user if [ ! -d "$SMB_PRIVATE_DIR" ]; then sudo mkdir $SMB_PRIVATE_DIR sudo touch $SMB_PRIVATE_DIR/secrets.tdb fi for backend_name in ${MANILA_ENABLED_BACKENDS//,/ }; do iniset $MANILA_CONF $backend_name driver_handles_share_servers False iniset $MANILA_CONF $backend_name lvm_share_export_ip $HOST_IP done iniset $MANILA_CONF DEFAULT data_node_access_ip $HOST_IP fi } # start_manila - Start running processes, including screen function start_manila { run_process m-api "$MANILA_BIN_DIR/manila-api --config-file $MANILA_CONF" run_process m-shr "$MANILA_BIN_DIR/manila-share --config-file $MANILA_CONF" run_process m-sch "$MANILA_BIN_DIR/manila-scheduler --config-file $MANILA_CONF" run_process m-dat "$MANILA_BIN_DIR/manila-data --config-file $MANILA_CONF" echo "Waiting for Manila to start..." if ! wait_for_service $SERVICE_TIMEOUT $MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT; then die $LINENO "Manila did not start" fi # Start proxies if enabled if is_service_enabled tls-proxy; then start_tls_proxy '*' $MANILA_SERVICE_PORT $MANILA_SERVICE_HOST $MANILA_SERVICE_PORT_INT & fi } # stop_manila - Stop running processes function stop_manila { # Kill the manila processes for serv in m-api m-sch m-shr m-dat; do stop_process $serv done } # update_tempest - Function used for updating Tempest config if Tempest service enabled function update_tempest { if is_service_enabled tempest; then TEMPEST_CONFIG=${TEMPEST_CONFIG:-$TEMPEST_DIR/etc/tempest.conf} ADMIN_TENANT_NAME=${ADMIN_TENANT_NAME:-"admin"} ADMIN_DOMAIN_NAME=${ADMIN_DOMAIN_NAME:-"Default"} ADMIN_PASSWORD=${ADMIN_PASSWORD:-"secretadmin"} if [ $(trueorfalse False MANILA_USE_SERVICE_INSTANCE_PASSWORD) == True ]; then iniset $TEMPEST_CONFIG share image_password $MANILA_SERVICE_INSTANCE_PASSWORD fi iniset $TEMPEST_CONFIG share image_with_share_tools $MANILA_SERVICE_IMAGE_NAME iniset $TEMPEST_CONFIG auth admin_username ${ADMIN_USERNAME:-"admin"} iniset $TEMPEST_CONFIG auth admin_password ${ADMIN_PASSWORD:-"secretadmin"} iniset $TEMPEST_CONFIG auth admin_tenant_name $ADMIN_TENANT_NAME iniset $TEMPEST_CONFIG auth admin_domain_name $ADMIN_DOMAIN_NAME iniset $TEMPEST_CONFIG identity username ${TEMPEST_USERNAME:-"demo"} iniset $TEMPEST_CONFIG identity password $ADMIN_PASSWORD iniset $TEMPEST_CONFIG identity tenant_name ${TEMPEST_TENANT_NAME:-"demo"} iniset $TEMPEST_CONFIG identity domain_name $ADMIN_DOMAIN_NAME iniset $TEMPEST_CONFIG identity alt_username ${ALT_USERNAME:-"alt_demo"} iniset $TEMPEST_CONFIG identity alt_password $ADMIN_PASSWORD iniset $TEMPEST_CONFIG identity alt_tenant_name ${ALT_TENANT_NAME:-"alt_demo"} iniset $TEMPEST_CONFIG identity alt_domain_name $ADMIN_DOMAIN_NAME fi } function install_docker_ubuntu { sudo apt-get update install_package apparmor install_package docker.io } function download_image { local image_url=$1 local image image_fname image_fname=`basename "$image_url"` if [[ $image_url != file* ]]; then # Downloads the image (uec ami+akistyle), then extracts it. if [[ ! -f $FILES/$image_fname || "$(stat -c "%s" $FILES/$image_fname)" = "0" ]]; then wget --progress=dot:giga -c $image_url -O $FILES/$image_fname if [[ $? -ne 0 ]]; then echo "Not found: $image_url" return fi fi image="$FILES/${image_fname}" else # File based URL (RFC 1738): ``file://host/path`` # Remote files are not considered here. # unix: ``file:///home/user/path/file`` # windows: ``file:///C:/Documents%20and%20Settings/user/path/file`` image=$(echo $image_url | sed "s/^file:\/\///g") if [[ ! -f $image || "$(stat -c "%s" $image)" == "0" ]]; then echo "Not found: $image_url" return fi fi } function import_docker_service_image_ubuntu { GZIPPED_IMG_NAME=`basename "$MANILA_DOCKER_IMAGE_URL"` IMG_NAME_LOAD=${GZIPPED_IMG_NAME%.*} LOCAL_IMG_NAME=${IMG_NAME_LOAD%.*} if [[ "$(sudo docker images -q $LOCAL_IMG_NAME)" == "" ]]; then download_image $MANILA_DOCKER_IMAGE_URL # Import image in Docker gzip -d $FILES/$GZIPPED_IMG_NAME sudo docker load --input $FILES/$IMG_NAME_LOAD fi } function remove_docker_service_image { sudo docker rmi $MANILA_DOCKER_IMAGE_ALIAS } function install_libraries { if [ $(trueorfalse False MANILA_MULTI_BACKEND) == True ]; then if [ $(trueorfalse True RUN_MANILA_HOST_ASSISTED_MIGRATION_TESTS) == True ]; then if is_ubuntu; then install_package nfs-common else install_package nfs-utils fi fi fi } # Main dispatcher if [[ "$1" == "stack" && "$2" == "install" ]]; then echo_summary "Installing Manila" install_manila set_cinder_quotas elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then echo_summary "Configuring Manila" configure_manila echo_summary "Initializing Manila" init_manila echo_summary "Installing extra libraries" install_libraries # Cinder config update if is_service_enabled cinder && [[ -n "$CINDER_OVERSUBSCRIPTION_RATIO" ]]; then CINDER_CONF=${CINDER_CONF:-/etc/cinder/cinder.conf} CINDER_ENABLED_BACKENDS=$(iniget $CINDER_CONF DEFAULT enabled_backends) for BN in ${CINDER_ENABLED_BACKENDS//,/ }; do iniset $CINDER_CONF $BN lvm_max_over_subscription_ratio $CINDER_OVERSUBSCRIPTION_RATIO done iniset $CINDER_CONF DEFAULT max_over_subscription_ratio $CINDER_OVERSUBSCRIPTION_RATIO fi elif [[ "$1" == "stack" && "$2" == "extra" ]]; then echo_summary "Creating Manila entities for auth service" create_manila_accounts if is_service_enabled nova; then echo_summary "Creating Manila service flavor" create_manila_service_flavor echo_summary "Creating Manila service security group" create_manila_service_secgroup fi # Skip image downloads when disabled. # This way vendor Manila driver CI tests can skip # this potentially long and unnecessary download. if [ "$MANILA_SERVICE_IMAGE_ENABLED" = "True" ]; then echo_summary "Creating Manila service image" create_manila_service_image else echo_summary "Skipping download of Manila service image" fi if is_service_enabled nova; then echo_summary "Creating Manila service keypair" create_manila_service_keypair echo_summary "Creating Manila service VMs for generic driver \ backends for which handlng of share servers is disabled." create_service_share_servers fi echo_summary "Configure Samba server" configure_samba echo_summary "Starting Manila" start_manila echo_summary "Creating Manila default share type" create_default_share_type echo_summary "Creating Manila custom share types" create_custom_share_types echo_summary "Manila UI is no longer enabled by default. \ Add enable_plugin manila-ui github.com/openstack/manila-ui \ to your local.conf file to enable Manila UI" elif [[ "$1" == "stack" && "$2" == "test-config" ]]; then echo_summary "Update Tempest config" update_tempest fi if [[ "$1" == "unstack" ]]; then cleanup_manila fi if [[ "$1" == "clean" ]]; then cleanup_manila sudo rm -rf /etc/manila fi # Restore xtrace $XTRACE