============== Quobyte Driver ============== Quobyte can be used as a storage back end for the OpenStack Shared File System service. Shares in the Shared File System service are mapped 1:1 to Quobyte volumes. Access is provided via NFS protocol and IP-based authentication. The Quobyte driver uses the Quobyte API service. Supported shared filesystems and operations ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The drivers supports NFS shares. The following operations are supported: - Create a share. - Delete a share. - Allow share access. Note the following limitations: - Only IP access type is supported. - Deny share access. Driver options ~~~~~~~~~~~~~~ The following table contains the configuration options specific to the share driver. .. include:: ../../tables/manila-quobyte.inc Configuration ~~~~~~~~~~~~~~ To configure Quobyte access for the Shared File System service, a back end configuration section has to be added in the ``manila.conf`` file. Add the name of the configuration section to ``enabled_share_backends`` in the ``manila.conf`` file. For example, if the section is named ``Quobyte``: .. code-block:: ini enabled_share_backends = Quobyte Create the new back end configuration section, in this case named ``Quobyte``: .. code-block:: ini [Quobyte] share_driver = manila.share.drivers.quobyte.quobyte.QuobyteShareDriver share_backend_name = QUOBYTE quobyte_api_url = http://api.myserver.com:1234/ quobyte_delete_shares = False quobyte_volume_configuration = BASE quobyte_default_volume_user = myuser quobyte_default_volume_group = mygroup The section name must match the name used in the ``enabled_share_backends`` option described above. The ``share_driver`` setting is required as shown, the other options should be set according to your local Quobyte setup. Other security-related options are: .. code-block:: ini quobyte_api_ca = /path/to/API/server/verification/certificate quobyte_api_username = api_user quobyte_api_password = api_user_pwd Quobyte support can be found at the `Quobyte support webpage `_.