dc93ae534c
This patch makes necessary changes to devstack manila plugin in order to be able to run IPv6 scenario tests. Part of the changes included the dependency of neutron-dynamic-routing plugin and the installation of quagga, so routes in devstack host can be created automatically for each router and private network created by tempest during the tests. Also, added a new config option "override_ip_for_nfs_access" for manila tempest plugin that overrides the access rules used for NFS scenario tests. This option can be set by exporting the environment variable "OVERRIDE_IP_FOR_NFS_ACCESS" with the intended value before running devstack. This change is enabled by a following change and tested alongside a change on manila-tempest-plugin project. Please note that we are temporarily disabling IPv6 functionality in Host-assisted Share Migration, as the Data Service is not able to handle IPv4 + IPv6 scenarios. Change-Id: I4ca727f92618998242af18908bbbda6bb5f86303 Needed-By: Id8b005cdd429d53a75624885fe7ca795746c3ede
1165 lines
49 KiB
Bash
Executable File
1165 lines
49 KiB
Bash
Executable File
#!/bin/bash
|
||
|
||
# Plugin file for enabling manila services
|
||
# ----------------------------------------
|
||
|
||
# Save trace setting
|
||
XTRACE=$(set +o | grep xtrace)
|
||
set -o xtrace
|
||
|
||
# Entry Points
|
||
# ------------
|
||
|
||
function _clean_share_group {
|
||
local vg=$1
|
||
local vg_prefix=$2
|
||
# Clean out existing shares
|
||
for lv in `sudo lvs --noheadings -o lv_name $vg`; do
|
||
# vg_prefix prefixes the LVs we want
|
||
if [[ "${lv#$vg_prefix}" != "$lv" ]]; then
|
||
sudo umount -f $MANILA_MNT_DIR/$lv
|
||
sudo lvremove -f $vg/$lv
|
||
sudo rm -rf $MANILA_MNT_DIR/$lv
|
||
fi
|
||
done
|
||
}
|
||
|
||
function _clean_manila_lvm_backing_file {
|
||
local vg=$1
|
||
|
||
# if there is no logical volume left, it's safe to attempt a cleanup
|
||
# of the backing file
|
||
if [ -z "`sudo lvs --noheadings -o lv_name $vg`" ]; then
|
||
# if the backing physical device is a loop device, it was probably setup by devstack
|
||
VG_DEV=$(sudo losetup -j $DATA_DIR/${vg}-backing-file | awk -F':' '/backing-file/ { print $1
|
||
}')
|
||
if [[ -n "$VG_DEV" ]]; then
|
||
sudo losetup -d $VG_DEV
|
||
rm -f $DATA_DIR/${vg}-backing-file
|
||
fi
|
||
fi
|
||
}
|
||
|
||
function _clean_zfsonlinux_data {
|
||
for filename in "$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/*; do
|
||
if [[ $(sudo zpool list | grep $filename) ]]; then
|
||
echo "Destroying zpool named $filename"
|
||
sudo zpool destroy -f $filename
|
||
file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR$filename"
|
||
echo "Destroying file named $file"
|
||
rm -f $file
|
||
fi
|
||
done
|
||
}
|
||
|
||
# cleanup_manila - Remove residual data files, anything left over from previous
|
||
# runs that a clean run would need to clean up
|
||
function cleanup_manila {
|
||
# All stuff, that are created by share drivers will be cleaned up by other services.
|
||
_clean_share_group $SHARE_GROUP $SHARE_NAME_PREFIX
|
||
_clean_manila_lvm_backing_file $SHARE_GROUP
|
||
_clean_zfsonlinux_data
|
||
}
|
||
|
||
# _config_manila_apache_wsgi() - Configure manila-api wsgi application.
|
||
function _config_manila_apache_wsgi {
|
||
local manila_api_apache_conf
|
||
local venv_path=""
|
||
manila_api_apache_conf=$(apache_site_config_for manila-api)
|
||
|
||
sudo cp $MANILA_DIR/devstack/apache-manila.template $manila_api_apache_conf
|
||
sudo sed -e "
|
||
s|%APACHE_NAME%|$APACHE_NAME|g;
|
||
s|%MANILA_BIN_DIR%|$MANILA_BIN_DIR|g;
|
||
s|%PORT%|$MANILA_SERVICE_PORT|g;
|
||
s|%APIWORKERS%|$API_WORKERS|g;
|
||
s|%USER%|$STACK_USER|g;
|
||
" -i $manila_api_apache_conf
|
||
}
|
||
|
||
# configure_default_backends - configures default Manila backends with generic driver.
|
||
function configure_default_backends {
|
||
# Configure two default backends with generic drivers onboard
|
||
for group_name in $MANILA_BACKEND1_CONFIG_GROUP_NAME $MANILA_BACKEND2_CONFIG_GROUP_NAME; do
|
||
iniset $MANILA_CONF $group_name share_driver $SHARE_DRIVER
|
||
if [ "$MANILA_BACKEND1_CONFIG_GROUP_NAME" == "$group_name" ]; then
|
||
iniset $MANILA_CONF $group_name share_backend_name $MANILA_SHARE_BACKEND1_NAME
|
||
else
|
||
iniset $MANILA_CONF $group_name share_backend_name $MANILA_SHARE_BACKEND2_NAME
|
||
fi
|
||
iniset $MANILA_CONF $group_name path_to_public_key $MANILA_PATH_TO_PUBLIC_KEY
|
||
iniset $MANILA_CONF $group_name path_to_private_key $MANILA_PATH_TO_PRIVATE_KEY
|
||
iniset $MANILA_CONF $group_name service_image_name $MANILA_SERVICE_IMAGE_NAME
|
||
iniset $MANILA_CONF $group_name service_instance_user $MANILA_SERVICE_INSTANCE_USER
|
||
iniset $MANILA_CONF $group_name driver_handles_share_servers True
|
||
|
||
if [ "$SHARE_DRIVER" == $MANILA_CONTAINER_DRIVER ]; then
|
||
iniset $MANILA_CONF $group_name network_api_class $MANILA_NETWORK_API_CLASS
|
||
iniset $MANILA_CONF $group_name neutron_host_id $(hostname)
|
||
iniset $MANILA_CONF $group_name neutron_vnic_type $MANILA_NEUTRON_VNIC_TYPE
|
||
fi
|
||
|
||
if [ $(trueorfalse False MANILA_USE_SERVICE_INSTANCE_PASSWORD) == True ]; then
|
||
iniset $MANILA_CONF $group_name service_instance_password $MANILA_SERVICE_INSTANCE_PASSWORD
|
||
fi
|
||
done
|
||
}
|
||
|
||
# set_config_opts - this allows to set any config opt to any config group,
|
||
# parsing env vars by prefix special 'MANILA_OPTGROUP_'.
|
||
function set_config_opts {
|
||
# expects only one param - name of config group(s) as list separated by commas
|
||
GROUP_NAMES=$1
|
||
if [[ -n "$GROUP_NAMES" ]]; then
|
||
for be in ${GROUP_NAMES//,/ }; do
|
||
# get backend_specific opt values
|
||
prefix=MANILA_OPTGROUP_$be\_
|
||
( set -o posix ; set ) | grep ^$prefix | while read -r line ; do
|
||
# parse it to opt names and values
|
||
opt=${line#$prefix}
|
||
opt_name=${opt%%=*}
|
||
opt_value=${opt##*=}
|
||
iniset $MANILA_CONF $be $opt_name $opt_value
|
||
done
|
||
done
|
||
fi
|
||
}
|
||
|
||
# set_cinder_quotas - Sets Cinder quotas, that is useful for generic driver,
|
||
# which uses Cinder volumes and snapshots.
|
||
function set_cinder_quotas {
|
||
# Update Cinder configuration to make sure default quotas are enough
|
||
# for Manila using Generic driver with parallel testing.
|
||
if is_service_enabled cinder; then
|
||
if [[ ! "$CINDER_CONF" ]]; then
|
||
CINDER_CONF=/etc/cinder/cinder.conf
|
||
fi
|
||
iniset $CINDER_CONF DEFAULT quota_volumes 50
|
||
iniset $CINDER_CONF DEFAULT quota_snapshots 50
|
||
iniset $CINDER_CONF DEFAULT quota_gigabytes 1000
|
||
fi
|
||
}
|
||
|
||
# configure_manila - Set config files, create data dirs, etc
|
||
function configure_manila {
|
||
if [[ ! -d $MANILA_CONF_DIR ]]; then
|
||
sudo mkdir -p $MANILA_CONF_DIR
|
||
fi
|
||
sudo chown $STACK_USER $MANILA_CONF_DIR
|
||
|
||
if [[ -f $MANILA_DIR/etc/manila/policy.json ]]; then
|
||
cp -p $MANILA_DIR/etc/manila/policy.json $MANILA_CONF_DIR
|
||
fi
|
||
|
||
# Set the paths of certain binaries
|
||
MANILA_ROOTWRAP=$(get_rootwrap_location manila)
|
||
|
||
# If Manila ships the new rootwrap filters files, deploy them
|
||
# (owned by root) and add a parameter to $MANILA_ROOTWRAP
|
||
ROOTWRAP_MANILA_SUDOER_CMD="$MANILA_ROOTWRAP"
|
||
if [[ -d $MANILA_DIR/etc/manila/rootwrap.d ]]; then
|
||
# Wipe any existing rootwrap.d files first
|
||
if [[ -d $MANILA_CONF_DIR/rootwrap.d ]]; then
|
||
sudo rm -rf $MANILA_CONF_DIR/rootwrap.d
|
||
fi
|
||
# Deploy filters to /etc/manila/rootwrap.d
|
||
sudo mkdir -m 755 $MANILA_CONF_DIR/rootwrap.d
|
||
sudo cp $MANILA_DIR/etc/manila/rootwrap.d/*.filters $MANILA_CONF_DIR/rootwrap.d
|
||
sudo chown -R root:root $MANILA_CONF_DIR/rootwrap.d
|
||
sudo chmod 644 $MANILA_CONF_DIR/rootwrap.d/*
|
||
# Set up rootwrap.conf, pointing to /etc/manila/rootwrap.d
|
||
sudo cp $MANILA_DIR/etc/manila/rootwrap.conf $MANILA_CONF_DIR/
|
||
sudo sed -e "s:^filters_path=.*$:filters_path=$MANILA_CONF_DIR/rootwrap.d:" -i $MANILA_CONF_DIR/rootwrap.conf
|
||
sudo chown root:root $MANILA_CONF_DIR/rootwrap.conf
|
||
sudo chmod 0644 $MANILA_CONF_DIR/rootwrap.conf
|
||
# Specify rootwrap.conf as first parameter to manila-rootwrap
|
||
MANILA_ROOTWRAP="$MANILA_ROOTWRAP $MANILA_CONF_DIR/rootwrap.conf"
|
||
ROOTWRAP_MANILA_SUDOER_CMD="$MANILA_ROOTWRAP *"
|
||
fi
|
||
|
||
TEMPFILE=`mktemp`
|
||
echo "$USER ALL=(root) NOPASSWD: $ROOTWRAP_MANILA_SUDOER_CMD" >$TEMPFILE
|
||
chmod 0440 $TEMPFILE
|
||
sudo chown root:root $TEMPFILE
|
||
sudo mv $TEMPFILE /etc/sudoers.d/manila-rootwrap
|
||
|
||
cp $MANILA_DIR/etc/manila/api-paste.ini $MANILA_API_PASTE_INI
|
||
|
||
# Remove old conf file if exists
|
||
rm -f $MANILA_CONF
|
||
|
||
configure_auth_token_middleware $MANILA_CONF manila $MANILA_AUTH_CACHE_DIR
|
||
|
||
iniset $MANILA_CONF DEFAULT auth_strategy keystone
|
||
iniset $MANILA_CONF DEFAULT debug True
|
||
iniset $MANILA_CONF DEFAULT scheduler_driver $MANILA_SCHEDULER_DRIVER
|
||
iniset $MANILA_CONF DEFAULT share_name_template ${SHARE_NAME_PREFIX}%s
|
||
iniset $MANILA_CONF DATABASE connection `database_connection_url manila`
|
||
iniset $MANILA_CONF DATABASE max_pool_size 40
|
||
iniset $MANILA_CONF DEFAULT api_paste_config $MANILA_API_PASTE_INI
|
||
iniset $MANILA_CONF DEFAULT rootwrap_config $MANILA_CONF_DIR/rootwrap.conf
|
||
iniset $MANILA_CONF DEFAULT osapi_share_extension manila.api.contrib.standard_extensions
|
||
iniset $MANILA_CONF DEFAULT state_path $MANILA_STATE_PATH
|
||
iniset $MANILA_CONF DEFAULT default_share_type $MANILA_DEFAULT_SHARE_TYPE
|
||
iniset $MANILA_CONF DEFAULT default_share_group_type $MANILA_DEFAULT_SHARE_GROUP_TYPE
|
||
|
||
if ! [[ -z $MANILA_SHARE_MIGRATION_PERIOD_TASK_INTERVAL ]]; then
|
||
iniset $MANILA_CONF DEFAULT migration_driver_continue_update_interval $MANILA_SHARE_MIGRATION_PERIOD_TASK_INTERVAL
|
||
fi
|
||
|
||
if ! [[ -z $MANILA_DATA_COPY_CHECK_HASH ]]; then
|
||
iniset $MANILA_CONF DEFAULT check_hash $MANILA_DATA_COPY_CHECK_HASH
|
||
fi
|
||
|
||
iniset $MANILA_CONF DEFAULT enabled_share_protocols $MANILA_ENABLED_SHARE_PROTOCOLS
|
||
|
||
iniset $MANILA_CONF oslo_concurrency lock_path $MANILA_LOCK_PATH
|
||
|
||
iniset $MANILA_CONF DEFAULT wsgi_keep_alive False
|
||
|
||
iniset $MANILA_CONF DEFAULT lvm_share_volume_group $SHARE_GROUP
|
||
|
||
# Set the replica_state_update_interval
|
||
iniset $MANILA_CONF DEFAULT replica_state_update_interval $MANILA_REPLICA_STATE_UPDATE_INTERVAL
|
||
|
||
if is_service_enabled neutron; then
|
||
configure_auth_token_middleware $MANILA_CONF neutron $MANILA_AUTH_CACHE_DIR neutron
|
||
fi
|
||
if is_service_enabled nova; then
|
||
configure_auth_token_middleware $MANILA_CONF nova $MANILA_AUTH_CACHE_DIR nova
|
||
fi
|
||
if is_service_enabled cinder; then
|
||
configure_auth_token_middleware $MANILA_CONF cinder $MANILA_AUTH_CACHE_DIR cinder
|
||
fi
|
||
|
||
# Note: set up config group does not mean that this backend will be enabled.
|
||
# To enable it, specify its name explicitly using "enabled_share_backends" opt.
|
||
configure_default_backends
|
||
default_backends=$MANILA_BACKEND1_CONFIG_GROUP_NAME
|
||
if [ "$MANILA_MULTI_BACKEND" = "True" ]; then
|
||
default_backends+=,$MANILA_BACKEND2_CONFIG_GROUP_NAME
|
||
fi
|
||
if [ ! $MANILA_ENABLED_BACKENDS ]; then
|
||
# If $MANILA_ENABLED_BACKENDS is not set, use configured backends by default
|
||
export MANILA_ENABLED_BACKENDS=$default_backends
|
||
fi
|
||
iniset $MANILA_CONF DEFAULT enabled_share_backends $MANILA_ENABLED_BACKENDS
|
||
|
||
if [ ! -f $MANILA_PATH_TO_PRIVATE_KEY ]; then
|
||
ssh-keygen -N "" -t rsa -f $MANILA_PATH_TO_PRIVATE_KEY;
|
||
fi
|
||
|
||
iniset $MANILA_CONF DEFAULT manila_service_keypair_name $MANILA_SERVICE_KEYPAIR_NAME
|
||
|
||
if is_service_enabled tls-proxy; then
|
||
# Set the service port for a proxy to take the original
|
||
iniset $MANILA_CONF DEFAULT osapi_share_listen_port $MANILA_SERVICE_PORT_INT
|
||
fi
|
||
|
||
if [ "$SYSLOG" != "False" ]; then
|
||
iniset $MANILA_CONF DEFAULT use_syslog True
|
||
fi
|
||
|
||
iniset_rpc_backend manila $MANILA_CONF DEFAULT
|
||
|
||
if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then
|
||
# Add color to logging output
|
||
iniset $MANILA_CONF DEFAULT logging_context_format_string \
|
||
"%(asctime)s.%(msecs)d %(color)s%(levelname)s %(name)s [[01;36m%(request_id)s [00;36m%(user_id)s %(project_id)s%(color)s] [01;35m%(instance)s%(color)s%(message)s[00m"
|
||
iniset $MANILA_CONF DEFAULT logging_default_format_string \
|
||
"%(asctime)s.%(msecs)d %(color)s%(levelname)s %(name)s [[00;36m-%(color)s] [01;35m%(instance)s%(color)s%(message)s[00m"
|
||
iniset $MANILA_CONF DEFAULT logging_debug_format_suffix \
|
||
"[00;33mfrom (pid=%(process)d) %(funcName)s %(pathname)s:%(lineno)d[00m"
|
||
iniset $MANILA_CONF DEFAULT logging_exception_prefix \
|
||
"%(color)s%(asctime)s.%(msecs)d TRACE %(name)s [01;35m%(instance)s[00m"
|
||
fi
|
||
|
||
MANILA_CONFIGURE_GROUPS=${MANILA_CONFIGURE_GROUPS:-"$MANILA_ENABLED_BACKENDS"}
|
||
set_config_opts $MANILA_CONFIGURE_GROUPS
|
||
set_config_opts DEFAULT
|
||
|
||
if [ $(trueorfalse False MANILA_USE_MOD_WSGI) == True ]; then
|
||
_config_manila_apache_wsgi
|
||
fi
|
||
}
|
||
|
||
|
||
function create_manila_service_keypair {
|
||
if is_service_enabled nova; then
|
||
local keypair_exists=$( openstack keypair list | grep " $MANILA_SERVICE_KEYPAIR_NAME " )
|
||
if [[ -z $keypair_exists ]]; then
|
||
openstack keypair create $MANILA_SERVICE_KEYPAIR_NAME --public-key $MANILA_PATH_TO_PUBLIC_KEY
|
||
fi
|
||
fi
|
||
}
|
||
|
||
|
||
function is_driver_enabled {
|
||
driver_name=$1
|
||
for BE in ${MANILA_ENABLED_BACKENDS//,/ }; do
|
||
share_driver=$(iniget $MANILA_CONF $BE share_driver)
|
||
if [ "$share_driver" == "$driver_name" ]; then
|
||
return 0
|
||
fi
|
||
done
|
||
return 1
|
||
}
|
||
|
||
|
||
# create_service_share_servers - creates service Nova VMs, one per generic
|
||
# driver, and only if it is configured to mode without handling of share servers.
|
||
function create_service_share_servers {
|
||
created_admin_network=false
|
||
for BE in ${MANILA_ENABLED_BACKENDS//,/ }; do
|
||
driver_handles_share_servers=$(iniget $MANILA_CONF $BE driver_handles_share_servers)
|
||
share_driver=$(iniget $MANILA_CONF $BE share_driver)
|
||
generic_driver='manila.share.drivers.generic.GenericShareDriver'
|
||
if [[ $share_driver == $generic_driver ]]; then
|
||
if [[ $(trueorfalse False driver_handles_share_servers) == False ]]; then
|
||
vm_name='manila_service_share_server_'$BE
|
||
local vm_exists=$( openstack server list --all-projects | grep " $vm_name " )
|
||
if [[ -z $vm_exists ]]; then
|
||
private_net_id=$(openstack network show $PRIVATE_NETWORK_NAME -f value -c id)
|
||
vm_id=$(openstack server create $vm_name \
|
||
--flavor $MANILA_SERVICE_VM_FLAVOR_NAME \
|
||
--image $MANILA_SERVICE_IMAGE_NAME \
|
||
--nic net-id=$private_net_id \
|
||
--security-group $MANILA_SERVICE_SECGROUP \
|
||
--key-name $MANILA_SERVICE_KEYPAIR_NAME \
|
||
| grep ' id ' | get_field 2)
|
||
else
|
||
vm_id=$(openstack server show $vm_name -f value -c id)
|
||
fi
|
||
|
||
floating_ip=$(openstack floating ip create $PUBLIC_NETWORK_NAME --subnet $PUBLIC_SUBNET_NAME | grep 'floating_ip_address' | get_field 2)
|
||
openstack server add floating ip $vm_id $floating_ip
|
||
|
||
iniset $MANILA_CONF $BE service_instance_name_or_id $vm_id
|
||
iniset $MANILA_CONF $BE service_net_name_or_ip $floating_ip
|
||
iniset $MANILA_CONF $BE tenant_net_name_or_ip $PRIVATE_NETWORK_NAME
|
||
else
|
||
if is_service_enabled neutron; then
|
||
if ! [[ -z $MANILA_ADMIN_NET_RANGE ]]; then
|
||
if [ $created_admin_network == false ]; then
|
||
project_id=$(openstack project show $SERVICE_PROJECT_NAME -c id -f value)
|
||
local admin_net_id=$( openstack network show admin_net -f value -c id )
|
||
if [[ -z $admin_net_id ]]; then
|
||
openstack network create admin_net --project $project_id
|
||
admin_net_id=$(openstack network show admin_net -f value -c id)
|
||
fi
|
||
|
||
local admin_subnet_id=$( openstack subnet show admin_subnet -f value -c id )
|
||
if [[ -z $admin_subnet_id ]]; then
|
||
openstack subnet create admin_subnet --project $project_id --ip-version 4 --network $admin_net_id --gateway None --subnet-range $MANILA_ADMIN_NET_RANGE
|
||
admin_subnet_id=$(openstack subnet show admin_subnet -f value -c id)
|
||
fi
|
||
created_admin_network=true
|
||
fi
|
||
iniset $MANILA_CONF $BE admin_network_id $admin_net_id
|
||
iniset $MANILA_CONF $BE admin_subnet_id $admin_subnet_id
|
||
fi
|
||
fi
|
||
fi
|
||
fi
|
||
done
|
||
configure_data_service_generic_driver
|
||
}
|
||
|
||
function configure_data_service_generic_driver {
|
||
enabled_backends=(${MANILA_ENABLED_BACKENDS//,/ })
|
||
share_driver=$(iniget $MANILA_CONF ${enabled_backends[0]} share_driver)
|
||
generic_driver='manila.share.drivers.generic.GenericShareDriver'
|
||
if [[ $share_driver == $generic_driver ]]; then
|
||
driver_handles_share_servers=$(iniget $MANILA_CONF ${enabled_backends[0]} driver_handles_share_servers)
|
||
if [[ $(trueorfalse False driver_handles_share_servers) == False ]]; then
|
||
iniset $MANILA_CONF DEFAULT data_node_access_ip $PUBLIC_NETWORK_GATEWAY
|
||
else
|
||
if ! [[ -z $MANILA_DATA_NODE_IP ]]; then
|
||
iniset $MANILA_CONF DEFAULT data_node_access_ip $MANILA_DATA_NODE_IP
|
||
fi
|
||
fi
|
||
fi
|
||
}
|
||
# create_manila_service_flavor - creates flavor, that will be used by backends
|
||
# with configured generic driver to boot Nova VMs with.
|
||
function create_manila_service_flavor {
|
||
if is_service_enabled nova; then
|
||
local flavor_exists=$( openstack flavor list | grep " $MANILA_SERVICE_VM_FLAVOR_NAME " )
|
||
if [[ -z $flavor_exists ]]; then
|
||
# Create flavor for Manila's service VM
|
||
openstack flavor create \
|
||
$MANILA_SERVICE_VM_FLAVOR_NAME \
|
||
--id $MANILA_SERVICE_VM_FLAVOR_REF \
|
||
--ram $MANILA_SERVICE_VM_FLAVOR_RAM \
|
||
--disk $MANILA_SERVICE_VM_FLAVOR_DISK \
|
||
--vcpus $MANILA_SERVICE_VM_FLAVOR_VCPUS
|
||
fi
|
||
fi
|
||
}
|
||
|
||
# create_manila_service_image - creates image, that will be used by backends
|
||
# with configured generic driver to boot Nova VMs from.
|
||
function create_manila_service_image {
|
||
if is_service_enabled nova; then
|
||
TOKEN=$(openstack token issue -c id -f value)
|
||
local image_exists=$( openstack image list | grep " $MANILA_SERVICE_IMAGE_NAME " )
|
||
if [[ -z $image_exists ]]; then
|
||
# Download Manila's image
|
||
if is_service_enabled g-reg; then
|
||
upload_image $MANILA_SERVICE_IMAGE_URL $TOKEN
|
||
fi
|
||
fi
|
||
fi
|
||
}
|
||
|
||
# create_manila_service_secgroup - creates security group that is used by
|
||
# Nova VMs when generic driver is configured.
|
||
function create_manila_service_secgroup {
|
||
# Create a secgroup
|
||
if ! openstack security group list | grep -q $MANILA_SERVICE_SECGROUP; then
|
||
openstack security group create $MANILA_SERVICE_SECGROUP --description "$MANILA_SERVICE_SECGROUP description"
|
||
if ! timeout 30 sh -c "while ! openstack security group list | grep -q $MANILA_SERVICE_SECGROUP; do sleep 1; done"; then
|
||
echo "Security group not created"
|
||
exit 1
|
||
fi
|
||
fi
|
||
|
||
# Configure Security Group Rules
|
||
if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q icmp; then
|
||
openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol icmp
|
||
fi
|
||
if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " tcp .* 22 "; then
|
||
openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol tcp --dst-port 22
|
||
fi
|
||
if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " tcp .* 2049 "; then
|
||
openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol tcp --dst-port 2049
|
||
fi
|
||
if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " udp .* 2049 "; then
|
||
openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol udp --dst-port 2049
|
||
fi
|
||
if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " udp .* 445 "; then
|
||
openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol udp --dst-port 445
|
||
fi
|
||
if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " tcp .* 445 "; then
|
||
openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol tcp --dst-port 445
|
||
fi
|
||
if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " tcp .* 139 "; then
|
||
openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol tcp --dst-port 137:139
|
||
fi
|
||
if ! openstack security group rule list $MANILA_SERVICE_SECGROUP | grep -q " udp .* 139 "; then
|
||
openstack security group rule create $MANILA_SERVICE_SECGROUP --protocol udp --dst-port 137:139
|
||
fi
|
||
|
||
# List secgroup rules
|
||
openstack security group rule list $MANILA_SERVICE_SECGROUP
|
||
}
|
||
|
||
# create_manila_accounts - Set up common required manila accounts
|
||
function create_manila_accounts {
|
||
|
||
create_service_user "manila"
|
||
|
||
# Set up Manila v1 service and endpoint
|
||
get_or_create_service "manila" "share" "Manila Shared Filesystem Service"
|
||
get_or_create_endpoint "share" "$REGION_NAME" \
|
||
"$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v1/\$(tenant_id)s" \
|
||
"$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v1/\$(tenant_id)s" \
|
||
"$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v1/\$(tenant_id)s"
|
||
|
||
# Set up Manila v2 service and endpoint
|
||
get_or_create_service "manilav2" "sharev2" "Manila Shared Filesystem Service V2"
|
||
get_or_create_endpoint "sharev2" "$REGION_NAME" \
|
||
"$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v2/\$(tenant_id)s" \
|
||
"$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v2/\$(tenant_id)s" \
|
||
"$MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT/v2/\$(tenant_id)s"
|
||
}
|
||
|
||
# create_default_share_group_type - create share group type that will be set as default.
|
||
function create_default_share_group_type {
|
||
local type_exists=$( manila share-group-type-list | grep " $MANILA_DEFAULT_SHARE_GROUP_TYPE " )
|
||
if [[ -z $type_exists ]]; then
|
||
manila share-group-type-create $MANILA_DEFAULT_SHARE_GROUP_TYPE $MANILA_DEFAULT_SHARE_TYPE
|
||
fi
|
||
if [[ $MANILA_DEFAULT_SHARE_GROUP_TYPE_SPECS ]]; then
|
||
manila share-group-type-key $MANILA_DEFAULT_SHARE_GROUP_TYPE set $MANILA_DEFAULT_SHARE_GROUP_TYPE_SPECS
|
||
fi
|
||
}
|
||
|
||
# create_default_share_type - create share type that will be set as default.
|
||
function create_default_share_type {
|
||
echo "Waiting for Manila API to start..."
|
||
if ! wait_for_service 60 $MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT; then
|
||
die $LINENO "Manila did not start"
|
||
fi
|
||
|
||
enabled_backends=(${MANILA_ENABLED_BACKENDS//,/ })
|
||
driver_handles_share_servers=$(iniget $MANILA_CONF ${enabled_backends[0]} driver_handles_share_servers)
|
||
|
||
local type_exists=$( manila type-list | grep " $MANILA_DEFAULT_SHARE_TYPE " )
|
||
if [[ -z $type_exists ]]; then
|
||
local command_args="$MANILA_DEFAULT_SHARE_TYPE $driver_handles_share_servers"
|
||
#if is_driver_enabled $MANILA_CONTAINER_DRIVER; then
|
||
# # TODO(aovchinnikov): Remove this condition when Container driver supports
|
||
# # snapshots
|
||
# command_args="$command_args --snapshot_support false"
|
||
#fi
|
||
manila type-create $command_args
|
||
fi
|
||
if [[ $MANILA_DEFAULT_SHARE_TYPE_EXTRA_SPECS ]]; then
|
||
manila type-key $MANILA_DEFAULT_SHARE_TYPE set $MANILA_DEFAULT_SHARE_TYPE_EXTRA_SPECS
|
||
fi
|
||
}
|
||
|
||
# create_custom_share_types - create share types suitable for both possible
|
||
# driver modes with names "dhss_true" and "dhss_false".
|
||
function create_custom_share_types {
|
||
manila type-create dhss_true True
|
||
if [[ $MANILA_DHSS_TRUE_SHARE_TYPE_EXTRA_SPECS ]]; then
|
||
manila type-key dhss_true set $MANILA_DHSS_TRUE_SHARE_TYPE_EXTRA_SPECS
|
||
fi
|
||
|
||
manila type-create dhss_false False
|
||
if [[ $MANILA_DHSS_FALSE_SHARE_TYPE_EXTRA_SPECS ]]; then
|
||
manila type-key dhss_false set $MANILA_DHSS_FALSE_SHARE_TYPE_EXTRA_SPECS
|
||
fi
|
||
}
|
||
|
||
# configure_backing_file - Set up backing file for LVM
|
||
function configure_backing_file {
|
||
if ! sudo vgs $SHARE_GROUP; then
|
||
if [ "$CONFIGURE_BACKING_FILE" = "True" ]; then
|
||
SHARE_BACKING_FILE=${SHARE_BACKING_FILE:-$DATA_DIR/${SHARE_GROUP}-backing-file}
|
||
# Only create if the file doesn't already exists
|
||
[[ -f $SHARE_BACKING_FILE ]] || truncate -s $SHARE_BACKING_FILE_SIZE $SHARE_BACKING_FILE
|
||
DEV=`sudo losetup -f --show $SHARE_BACKING_FILE`
|
||
else
|
||
DEV=$SHARE_BACKING_FILE
|
||
fi
|
||
# Only create if the loopback device doesn't contain $SHARE_GROUP
|
||
if ! sudo vgs $SHARE_GROUP; then sudo vgcreate $SHARE_GROUP $DEV; fi
|
||
fi
|
||
|
||
mkdir -p $MANILA_STATE_PATH/shares
|
||
mkdir -p /tmp/shares
|
||
}
|
||
|
||
# init_manila - Initializes database and creates manila dir if absent
|
||
function init_manila {
|
||
|
||
if is_service_enabled $DATABASE_BACKENDS; then
|
||
# (re)create manila database
|
||
recreate_database manila
|
||
|
||
$MANILA_BIN_DIR/manila-manage db sync
|
||
|
||
if [[ $(trueorfalse False MANILA_USE_DOWNGRADE_MIGRATIONS) == True ]]; then
|
||
# Use both - upgrade and downgrade migrations to verify that
|
||
# downgrade migrations do not break structure of Manila database.
|
||
$MANILA_BIN_DIR/manila-manage db downgrade
|
||
$MANILA_BIN_DIR/manila-manage db sync
|
||
fi
|
||
|
||
# Display version as debug-action (see bug/1473400)
|
||
$MANILA_BIN_DIR/manila-manage db version
|
||
fi
|
||
|
||
if [ "$SHARE_DRIVER" == "manila.share.drivers.lvm.LVMShareDriver" ]; then
|
||
if is_service_enabled m-shr; then
|
||
# Configure a default volume group called '`lvm-shares`' for the share
|
||
# service if it does not yet exist. If you don't wish to use a file backed
|
||
# volume group, create your own volume group called ``stack-volumes`` before
|
||
# invoking ``stack.sh``.
|
||
#
|
||
# By default, the backing file is 8G in size, and is stored in ``/opt/stack/data``.
|
||
|
||
configure_backing_file
|
||
fi
|
||
elif [ "$SHARE_DRIVER" == $MANILA_CONTAINER_DRIVER ]; then
|
||
if is_service_enabled m-shr; then
|
||
SHARE_GROUP=$MANILA_CONTAINER_VOLUME_GROUP_NAME
|
||
configure_backing_file
|
||
fi
|
||
|
||
elif [ "$SHARE_DRIVER" == "manila.share.drivers.zfsonlinux.driver.ZFSonLinuxShareDriver" ]; then
|
||
if is_service_enabled m-shr; then
|
||
mkdir -p $MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR
|
||
file_counter=0
|
||
MANILA_ZFSONLINUX_SERVICE_IP=${MANILA_ZFSONLINUX_SERVICE_IP:-"127.0.0.1"}
|
||
for BE in ${MANILA_ENABLED_BACKENDS//,/ }; do
|
||
if [[ $file_counter == 0 ]]; then
|
||
# NOTE(vponomaryov): create two pools for first ZFS backend
|
||
# to cover different use cases that are supported by driver:
|
||
# - Support of more than one zpool for share backend.
|
||
# - Support of nested datasets.
|
||
local first_file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/alpha
|
||
local second_file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/betta
|
||
truncate -s $MANILA_ZFSONLINUX_ZPOOL_SIZE $first_file
|
||
truncate -s $MANILA_ZFSONLINUX_ZPOOL_SIZE $second_file
|
||
sudo zpool create alpha $first_file
|
||
sudo zpool create betta $second_file
|
||
# Create subdir (nested dataset) for second pool
|
||
sudo zfs create betta/subdir
|
||
iniset $MANILA_CONF $BE zfs_zpool_list alpha,betta/subdir
|
||
elif [[ $file_counter == 1 ]]; then
|
||
local file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/gamma
|
||
truncate -s $MANILA_ZFSONLINUX_ZPOOL_SIZE $file
|
||
sudo zpool create gamma $file
|
||
iniset $MANILA_CONF $BE zfs_zpool_list gamma
|
||
else
|
||
local filename=file"$file_counter"
|
||
local file="$MANILA_ZFSONLINUX_BACKEND_FILES_CONTAINER_DIR"/"$filename"
|
||
truncate -s $MANILA_ZFSONLINUX_ZPOOL_SIZE $file
|
||
sudo zpool create $filename $file
|
||
iniset $MANILA_CONF $BE zfs_zpool_list $filename
|
||
fi
|
||
iniset $MANILA_CONF $BE zfs_share_export_ip $MANILA_ZFSONLINUX_SHARE_EXPORT_IP
|
||
iniset $MANILA_CONF $BE zfs_service_ip $MANILA_ZFSONLINUX_SERVICE_IP
|
||
iniset $MANILA_CONF $BE zfs_dataset_creation_options $MANILA_ZFSONLINUX_DATASET_CREATION_OPTIONS
|
||
iniset $MANILA_CONF $BE zfs_use_ssh $MANILA_ZFSONLINUX_USE_SSH
|
||
iniset $MANILA_CONF $BE zfs_ssh_username $MANILA_ZFSONLINUX_SSH_USERNAME
|
||
iniset $MANILA_CONF $BE replication_domain $MANILA_ZFSONLINUX_REPLICATION_DOMAIN
|
||
iniset $MANILA_CONF $BE driver_handles_share_servers False
|
||
let "file_counter=file_counter+1"
|
||
done
|
||
# Install the server's SSH key in our known_hosts file
|
||
eval STACK_HOME=~$STACK_USER
|
||
ssh-keyscan ${MANILA_ZFSONLINUX_SERVICE_IP} >> $STACK_HOME/.ssh/known_hosts
|
||
# If the server is this machine, setup trust for ourselves (otherwise you're on your own)
|
||
if [ "$MANILA_ZFSONLINUX_SERVICE_IP" = "127.0.0.1" ] || [ "$MANILA_ZFSONLINUX_SERVICE_IP" = "localhost" ] ; then
|
||
# Trust our own SSH keys
|
||
eval SSH_USER_HOME=~$MANILA_ZFSONLINUX_SSH_USERNAME
|
||
cat $STACK_HOME/.ssh/*.pub >> $SSH_USER_HOME/.ssh/authorized_keys
|
||
# Give ssh user sudo access
|
||
echo "$MANILA_ZFSONLINUX_SSH_USERNAME ALL=(ALL) NOPASSWD: ALL" | sudo tee -a /etc/sudoers > /dev/null
|
||
iniset $MANILA_CONF DEFAULT data_node_access_ip $MANILA_ZFSONLINUX_SERVICE_IP
|
||
fi
|
||
fi
|
||
fi
|
||
|
||
# Create cache dir
|
||
sudo mkdir -p $MANILA_AUTH_CACHE_DIR
|
||
sudo chown $STACK_USER $MANILA_AUTH_CACHE_DIR
|
||
rm -f $MANILA_AUTH_CACHE_DIR/*
|
||
}
|
||
|
||
# check_nfs_kernel_service_state_ubuntu- Make sure nfsd is running
|
||
function check_nfs_kernel_service_state_ubuntu {
|
||
# (aovchinnikov): Workaround for nfs-utils bug 1052264
|
||
if [[ $(sudo service nfs-kernel-server status &> /dev/null || echo 'fail') == 'fail' ]]; then
|
||
echo "Apparently nfsd is not running. Trying to fix that."
|
||
sudo mkdir -p "/media/nfsdonubuntuhelper"
|
||
# (aovchinnikov): shell wrapping is needed for cases when a file to be written
|
||
# is owned by root.
|
||
sudo sh -c "echo '/media/nfsdonubuntuhelper 127.0.0.1(ro)' >> /etc/exports"
|
||
sudo service nfs-kernel-server start
|
||
fi
|
||
if [[ $(sudo service nfs-kernel-server status &> /dev/null || echo 'fail') == 'fail' ]]; then
|
||
echo "Failed to start nfsd. Exiting."
|
||
exit 1
|
||
fi
|
||
}
|
||
|
||
function _install_nfs_and_samba {
|
||
if is_ubuntu; then
|
||
install_package nfs-kernel-server nfs-common samba
|
||
check_nfs_kernel_service_state_ubuntu
|
||
elif is_fedora; then
|
||
install_package nfs-utils samba
|
||
sudo systemctl enable smb.service
|
||
sudo systemctl start smb.service
|
||
sudo systemctl enable nfs-server.service
|
||
sudo systemctl start nfs-server.service
|
||
elif is_suse; then
|
||
install_package nfs-kernel-server nfs-utils samba
|
||
else
|
||
echo "This distro is not supported. Skipping step of NFS and Samba installation."
|
||
fi
|
||
}
|
||
|
||
# install_manilaclient - Collect source and prepare
|
||
# In order to install from git, add LIBS_FROM_GIT="python-manilaclient"
|
||
# to local.conf
|
||
function install_manilaclient {
|
||
if use_library_from_git "python-manilaclient"; then
|
||
git_clone $MANILACLIENT_REPO $MANILACLIENT_DIR $MANILACLIENT_BRANCH
|
||
setup_develop $MANILACLIENT_DIR
|
||
else
|
||
pip_install python-manilaclient
|
||
fi
|
||
}
|
||
|
||
# install_manila - Collect source and prepare
|
||
function install_manila {
|
||
setup_develop $MANILA_DIR
|
||
|
||
if is_service_enabled m-shr; then
|
||
|
||
if [[ ! $(systemctl is-active nfs-ganesha.service) == 'active' ]]; then
|
||
_install_nfs_and_samba
|
||
fi
|
||
|
||
if [ "$SHARE_DRIVER" == "manila.share.drivers.zfsonlinux.driver.ZFSonLinuxShareDriver" ]; then
|
||
if [[ $(sudo zfs list &> /dev/null && sudo zpool list &> /dev/null || echo 'absent') == 'absent' ]]; then
|
||
# ZFS not found, try to install it
|
||
if is_ubuntu; then
|
||
if [[ $(lsb_release -s -d) == *"14.04"* ]]; then
|
||
# Trusty
|
||
sudo apt-get install -y software-properties-common
|
||
sudo apt-add-repository --yes ppa:zfs-native/stable
|
||
|
||
# Workaround for bug #1609696
|
||
sudo apt-mark hold grub*
|
||
|
||
sudo apt-get -y -q update && sudo apt-get -y -q upgrade
|
||
|
||
# Workaround for bug #1609696
|
||
sudo apt-mark unhold grub*
|
||
|
||
sudo apt-get install -y linux-headers-generic
|
||
sudo apt-get install -y build-essential
|
||
sudo apt-get install -y ubuntu-zfs
|
||
elif [[ $(lsb_release -s -d) == *"16.04"* ]]; then
|
||
# Xenial
|
||
sudo apt-get install -y zfsutils-linux
|
||
else
|
||
echo "Only 'Trusty' and 'Xenial' releases of Ubuntu are supported."
|
||
exit 1
|
||
fi
|
||
else
|
||
echo "Manila Devstack plugin supports installation "\
|
||
"of ZFS packages only for 'Ubuntu' distros. "\
|
||
"Please, install it first by other means or add its support "\
|
||
"for your distro."
|
||
exit 1
|
||
fi
|
||
sudo modprobe zfs
|
||
sudo modprobe zpool
|
||
fi
|
||
check_nfs_kernel_service_state_ubuntu
|
||
elif [ "$SHARE_DRIVER" == $MANILA_CONTAINER_DRIVER ]; then
|
||
if is_ubuntu; then
|
||
echo "Installing docker...."
|
||
install_docker_ubuntu
|
||
echo "Importing docker image"
|
||
import_docker_service_image_ubuntu
|
||
elif is_fedora; then
|
||
echo "Installing docker...."
|
||
install_docker_fedora
|
||
echo "Importing docker image"
|
||
# TODO(tbarron): See if using a fedora container image
|
||
# is faster/smaller because of fewer extra dependencies.
|
||
import_docker_service_image_ubuntu
|
||
else
|
||
echo "Manila Devstack plugin does not support Container Driver on"\
|
||
" distros other than Ubuntu or Fedora."
|
||
exit 1
|
||
fi
|
||
fi
|
||
fi
|
||
|
||
}
|
||
|
||
#configure_samba - Configure node as Samba server
|
||
function configure_samba {
|
||
if [ "$SHARE_DRIVER" == "manila.share.drivers.lvm.LVMShareDriver" ]; then
|
||
# TODO(vponomaryov): add here condition for ZFSonLinux driver too
|
||
# when it starts to support SAMBA
|
||
samba_daemon_name=smbd
|
||
if is_service_enabled m-shr; then
|
||
if is_fedora; then
|
||
samba_daemon_name=smb
|
||
fi
|
||
sudo service $samba_daemon_name restart || echo "Couldn't restart '$samba_daemon_name' service"
|
||
fi
|
||
|
||
if [[ -e /usr/share/samba/smb.conf ]]; then
|
||
sudo cp /usr/share/samba/smb.conf $SMB_CONF
|
||
fi
|
||
sudo chown $STACK_USER -R /etc/samba
|
||
iniset $SMB_CONF global include registry
|
||
iniset $SMB_CONF global security user
|
||
if [ ! -d "$SMB_PRIVATE_DIR" ]; then
|
||
sudo mkdir $SMB_PRIVATE_DIR
|
||
sudo touch $SMB_PRIVATE_DIR/secrets.tdb
|
||
fi
|
||
|
||
for backend_name in ${MANILA_ENABLED_BACKENDS//,/ }; do
|
||
iniset $MANILA_CONF $backend_name driver_handles_share_servers False
|
||
iniset $MANILA_CONF $backend_name lvm_share_export_ips $MANILA_LVM_SHARE_EXPORT_IPS
|
||
done
|
||
iniset $MANILA_CONF DEFAULT data_node_access_ip $HOST_IP
|
||
fi
|
||
}
|
||
|
||
# start_manila_api - starts manila API services and checks its availability
|
||
function start_manila_api {
|
||
if [ $(trueorfalse False MANILA_USE_MOD_WSGI) == True ]; then
|
||
install_apache_wsgi
|
||
enable_apache_site manila-api
|
||
restart_apache_server
|
||
tail_log m-api /var/log/$APACHE_NAME/manila_api.log
|
||
else
|
||
run_process m-api "$MANILA_BIN_DIR/manila-api --config-file $MANILA_CONF"
|
||
fi
|
||
|
||
echo "Waiting for Manila API to start..."
|
||
if ! wait_for_service $SERVICE_TIMEOUT $MANILA_SERVICE_PROTOCOL://$MANILA_SERVICE_HOST:$MANILA_SERVICE_PORT; then
|
||
die $LINENO "Manila API did not start"
|
||
fi
|
||
|
||
# Start proxies if enabled
|
||
if is_service_enabled tls-proxy; then
|
||
start_tls_proxy '*' $MANILA_SERVICE_PORT $MANILA_SERVICE_HOST $MANILA_SERVICE_PORT_INT &
|
||
fi
|
||
}
|
||
|
||
# start_rest_of_manila - starts non-api manila services
|
||
function start_rest_of_manila {
|
||
run_process m-shr "$MANILA_BIN_DIR/manila-share --config-file $MANILA_CONF"
|
||
run_process m-sch "$MANILA_BIN_DIR/manila-scheduler --config-file $MANILA_CONF"
|
||
run_process m-dat "$MANILA_BIN_DIR/manila-data --config-file $MANILA_CONF"
|
||
}
|
||
|
||
# start_manila - start all manila services. This function is kept for compatibility
|
||
# reasons with old approach.
|
||
function start_manila {
|
||
start_manila_api
|
||
start_rest_of_manila
|
||
}
|
||
|
||
# stop_manila - Stop running processes
|
||
function stop_manila {
|
||
# Disable manila api service
|
||
if [ $(trueorfalse False MANILA_USE_MOD_WSGI) == True ]; then
|
||
disable_apache_site manila-api
|
||
restart_apache_server
|
||
else
|
||
stop_process m-api
|
||
fi
|
||
|
||
# Kill all other manila processes
|
||
for serv in m-sch m-shr m-dat; do
|
||
stop_process $serv
|
||
done
|
||
}
|
||
|
||
# update_tempest - Function used for updating Tempest config if Tempest service enabled
|
||
function update_tempest {
|
||
if is_service_enabled tempest; then
|
||
TEMPEST_CONFIG=${TEMPEST_CONFIG:-$TEMPEST_DIR/etc/tempest.conf}
|
||
ADMIN_TENANT_NAME=${ADMIN_TENANT_NAME:-"admin"}
|
||
ADMIN_DOMAIN_NAME=${ADMIN_DOMAIN_NAME:-"Default"}
|
||
ADMIN_PASSWORD=${ADMIN_PASSWORD:-"secretadmin"}
|
||
|
||
if [ $(trueorfalse False MANILA_USE_SERVICE_INSTANCE_PASSWORD) == True ]; then
|
||
iniset $TEMPEST_CONFIG share image_password $MANILA_SERVICE_INSTANCE_PASSWORD
|
||
fi
|
||
iniset $TEMPEST_CONFIG share image_with_share_tools $MANILA_SERVICE_IMAGE_NAME
|
||
iniset $TEMPEST_CONFIG auth admin_username ${ADMIN_USERNAME:-"admin"}
|
||
iniset $TEMPEST_CONFIG auth admin_password ${ADMIN_PASSWORD:-"secretadmin"}
|
||
iniset $TEMPEST_CONFIG auth admin_tenant_name $ADMIN_TENANT_NAME
|
||
iniset $TEMPEST_CONFIG auth admin_domain_name $ADMIN_DOMAIN_NAME
|
||
iniset $TEMPEST_CONFIG identity username ${TEMPEST_USERNAME:-"demo"}
|
||
iniset $TEMPEST_CONFIG identity password $ADMIN_PASSWORD
|
||
iniset $TEMPEST_CONFIG identity tenant_name ${TEMPEST_TENANT_NAME:-"demo"}
|
||
iniset $TEMPEST_CONFIG identity domain_name $ADMIN_DOMAIN_NAME
|
||
iniset $TEMPEST_CONFIG identity alt_username ${ALT_USERNAME:-"alt_demo"}
|
||
iniset $TEMPEST_CONFIG identity alt_password $ADMIN_PASSWORD
|
||
iniset $TEMPEST_CONFIG identity alt_tenant_name ${ALT_TENANT_NAME:-"alt_demo"}
|
||
iniset $TEMPEST_CONFIG identity alt_domain_name $ADMIN_DOMAIN_NAME
|
||
fi
|
||
}
|
||
|
||
function install_docker_ubuntu {
|
||
sudo apt-get update
|
||
install_package apparmor
|
||
install_package docker.io
|
||
}
|
||
|
||
function install_docker_fedora {
|
||
sudo yum install -y docker
|
||
sudo systemctl enable docker
|
||
sudo systemctl start docker
|
||
}
|
||
|
||
function download_image {
|
||
local image_url=$1
|
||
|
||
local image image_fname
|
||
|
||
image_fname=`basename "$image_url"`
|
||
if [[ $image_url != file* ]]; then
|
||
# Downloads the image (uec ami+akistyle), then extracts it.
|
||
if [[ ! -f $FILES/$image_fname || "$(stat -c "%s" $FILES/$image_fname)" = "0" ]]; then
|
||
wget --progress=dot:giga -c $image_url -O $FILES/$image_fname
|
||
if [[ $? -ne 0 ]]; then
|
||
echo "Not found: $image_url"
|
||
return
|
||
fi
|
||
fi
|
||
image="$FILES/${image_fname}"
|
||
else
|
||
# File based URL (RFC 1738): ``file://host/path``
|
||
# Remote files are not considered here.
|
||
# unix: ``file:///home/user/path/file``
|
||
# windows: ``file:///C:/Documents%20and%20Settings/user/path/file``
|
||
image=$(echo $image_url | sed "s/^file:\/\///g")
|
||
if [[ ! -f $image || "$(stat -c "%s" $image)" == "0" ]]; then
|
||
echo "Not found: $image_url"
|
||
return
|
||
fi
|
||
fi
|
||
}
|
||
|
||
function import_docker_service_image_ubuntu {
|
||
GZIPPED_IMG_NAME=`basename "$MANILA_DOCKER_IMAGE_URL"`
|
||
IMG_NAME_LOAD=${GZIPPED_IMG_NAME%.*}
|
||
LOCAL_IMG_NAME=${IMG_NAME_LOAD%.*}
|
||
if [[ "$(sudo docker images -q $LOCAL_IMG_NAME)" == "" ]]; then
|
||
download_image $MANILA_DOCKER_IMAGE_URL
|
||
# Import image in Docker
|
||
gzip -d $FILES/$GZIPPED_IMG_NAME
|
||
sudo docker load --input $FILES/$IMG_NAME_LOAD
|
||
fi
|
||
}
|
||
|
||
function remove_docker_service_image {
|
||
sudo docker rmi $MANILA_DOCKER_IMAGE_ALIAS
|
||
}
|
||
|
||
|
||
function install_libraries {
|
||
if [ $(trueorfalse False MANILA_MULTI_BACKEND) == True ]; then
|
||
if [ $(trueorfalse True RUN_MANILA_HOST_ASSISTED_MIGRATION_TESTS) == True ]; then
|
||
if is_ubuntu; then
|
||
install_package nfs-common
|
||
else
|
||
install_package nfs-utils
|
||
fi
|
||
fi
|
||
fi
|
||
}
|
||
|
||
function setup_ipv6 {
|
||
|
||
# save IPv6 default route to add back later after enabling forwarding
|
||
local default_route=$(ip -6 route | grep default | cut -d ' ' -f1,2,3,4,5)
|
||
|
||
# make sure those system values are set
|
||
sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=0
|
||
sudo sysctl -w net.ipv6.conf.all.accept_ra=2
|
||
sudo sysctl -w net.ipv6.conf.all.forwarding=1
|
||
|
||
# Disable in-band as our communication is only internal
|
||
sudo ovs-vsctl set Bridge $PUBLIC_BRIDGE other_config:disable-in-band=true
|
||
|
||
# Create address scopes and subnet pools
|
||
neutron address-scope-create --shared scope-v4 4
|
||
neutron address-scope-create --shared scope-v6 6
|
||
openstack subnet pool create $SUBNETPOOL_NAME_V4 --default-prefix-length $SUBNETPOOL_SIZE_V4 --pool-prefix $SUBNETPOOL_PREFIX_V4 --address-scope scope-v4 --default --share
|
||
openstack subnet pool create $SUBNETPOOL_NAME_V6 --default-prefix-length $SUBNETPOOL_SIZE_V6 --pool-prefix $SUBNETPOOL_PREFIX_V6 --address-scope scope-v6 --default --share
|
||
|
||
# Create example private network and router
|
||
openstack router create $Q_ROUTER_NAME
|
||
openstack network create $PRIVATE_NETWORK_NAME
|
||
openstack subnet create --ip-version 6 --use-default-subnet-pool --ipv6-address-mode $IPV6_ADDRESS_MODE --ipv6-ra-mode $IPV6_RA_MODE --network $PRIVATE_NETWORK_NAME $IPV6_PRIVATE_SUBNET_NAME
|
||
openstack subnet create --ip-version 4 --use-default-subnet-pool --network $PRIVATE_NETWORK_NAME $PRIVATE_SUBNET_NAME
|
||
openstack router add subnet $Q_ROUTER_NAME $IPV6_PRIVATE_SUBNET_NAME
|
||
openstack router add subnet $Q_ROUTER_NAME $PRIVATE_SUBNET_NAME
|
||
|
||
# Create public network
|
||
openstack network create $PUBLIC_NETWORK_NAME --external --default --provider-network-type flat --provider-physical-network $PUBLIC_PHYSICAL_NETWORK
|
||
local public_gateway_ipv6=$(openstack subnet create $IPV6_PUBLIC_SUBNET_NAME --ip-version 6 --network $PUBLIC_NETWORK_NAME --subnet-pool $SUBNETPOOL_NAME_V6 --no-dhcp -c gateway_ip -f value)
|
||
local public_gateway_ipv4=$(openstack subnet create $PUBLIC_SUBNET_NAME --ip-version 4 --network $PUBLIC_NETWORK_NAME --subnet-range $FLOATING_RANGE --no-dhcp -c gateway_ip -f value)
|
||
|
||
# Set router to use public network
|
||
openstack router set --external-gateway $PUBLIC_NETWORK_NAME $Q_ROUTER_NAME
|
||
|
||
# Configure interfaces due to NEUTRON_CREATE_INITIAL_NETWORKS=False
|
||
local ipv4_cidr_len=${FLOATING_RANGE#*/}
|
||
sudo ip -6 addr add "$public_gateway_ipv6"/$SUBNETPOOL_SIZE_V6 dev $PUBLIC_BRIDGE
|
||
sudo ip addr add $PUBLIC_NETWORK_GATEWAY/"$ipv4_cidr_len" dev $PUBLIC_BRIDGE
|
||
|
||
# Enabling interface is needed due to NEUTRON_CREATE_INITIAL_NETWORKS=False
|
||
sudo ip link set $PUBLIC_BRIDGE up
|
||
|
||
if [ "$SHARE_DRIVER" == "manila.share.drivers.lvm.LVMShareDriver" ]; then
|
||
for backend_name in ${MANILA_ENABLED_BACKENDS//,/ }; do
|
||
iniset $MANILA_CONF $backend_name lvm_share_export_ips $public_gateway_ipv4,$public_gateway_ipv6
|
||
done
|
||
iniset $MANILA_CONF DEFAULT data_node_access_ip $public_gateway_ipv4
|
||
fi
|
||
|
||
# install Quagga for setting up the host routes dynamically
|
||
install_package quagga
|
||
|
||
# set Quagga daemons
|
||
(
|
||
echo "zebra=yes"
|
||
echo "bgpd=yes"
|
||
echo "ospfd=no"
|
||
echo "ospf6d=no"
|
||
echo "ripd=no"
|
||
echo "ripngd=no"
|
||
echo "isisd=no"
|
||
echo "babeld=no"
|
||
) | sudo tee /etc/quagga/daemons > /dev/null
|
||
|
||
# set Quagga zebra.conf
|
||
(
|
||
echo "hostname dsvm"
|
||
echo "password openstack"
|
||
echo "log file /var/log/quagga/zebra.log"
|
||
) | sudo tee /etc/quagga/zebra.conf > /dev/null
|
||
|
||
# set Quagga bgpd.conf
|
||
(
|
||
echo "log file /var/log/quagga/bgpd.log"
|
||
echo "bgp multiple-instance"
|
||
echo "router bgp 200"
|
||
echo " bgp router-id 1.2.3.4"
|
||
echo " neighbor ::1 remote-as 100"
|
||
echo " neighbor ::1 passive"
|
||
echo " address-family ipv6"
|
||
echo " neighbor ::1 activate"
|
||
echo "line vty"
|
||
echo "debug bgp events"
|
||
echo "debug bgp filters"
|
||
echo "debug bgp fsm"
|
||
echo "debug bgp keepalives"
|
||
echo "debug bgp updates"
|
||
) | sudo tee /etc/quagga/bgpd.conf > /dev/null
|
||
|
||
if is_ubuntu; then
|
||
sudo systemctl enable quagga
|
||
sudo systemctl restart quagga
|
||
else
|
||
# Disable SELinux rule that conflicts with Zebra
|
||
sudo setsebool -P zebra_write_config 1
|
||
sudo systemctl enable zebra
|
||
sudo systemctl enable bgpd
|
||
sudo systemctl restart zebra
|
||
sudo systemctl restart bgpd
|
||
fi
|
||
|
||
# add default IPv6 route back
|
||
if ! [[ -z $default_route ]]; then
|
||
sudo ip -6 route add $default_route
|
||
fi
|
||
|
||
}
|
||
|
||
# Main dispatcher
|
||
if [[ "$1" == "stack" && "$2" == "install" ]]; then
|
||
echo_summary "Installing Manila Client"
|
||
install_manilaclient
|
||
echo_summary "Installing Manila"
|
||
install_manila
|
||
set_cinder_quotas
|
||
elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
|
||
echo_summary "Configuring Manila"
|
||
configure_manila
|
||
echo_summary "Initializing Manila"
|
||
init_manila
|
||
echo_summary "Installing extra libraries"
|
||
install_libraries
|
||
echo_summary "Creating Manila entities for auth service"
|
||
create_manila_accounts
|
||
|
||
# Cinder config update
|
||
if is_service_enabled cinder && [[ -n "$CINDER_OVERSUBSCRIPTION_RATIO" ]]; then
|
||
CINDER_CONF=${CINDER_CONF:-/etc/cinder/cinder.conf}
|
||
CINDER_ENABLED_BACKENDS=$(iniget $CINDER_CONF DEFAULT enabled_backends)
|
||
for BN in ${CINDER_ENABLED_BACKENDS//,/ }; do
|
||
iniset $CINDER_CONF $BN lvm_max_over_subscription_ratio $CINDER_OVERSUBSCRIPTION_RATIO
|
||
done
|
||
iniset $CINDER_CONF DEFAULT max_over_subscription_ratio $CINDER_OVERSUBSCRIPTION_RATIO
|
||
fi
|
||
elif [[ "$1" == "stack" && "$2" == "extra" ]]; then
|
||
if is_service_enabled nova; then
|
||
echo_summary "Creating Manila service flavor"
|
||
create_manila_service_flavor
|
||
|
||
echo_summary "Creating Manila service security group"
|
||
create_manila_service_secgroup
|
||
fi
|
||
|
||
# Skip image downloads when disabled.
|
||
# This way vendor Manila driver CI tests can skip
|
||
# this potentially long and unnecessary download.
|
||
if [ "$MANILA_SERVICE_IMAGE_ENABLED" = "True" ]; then
|
||
echo_summary "Creating Manila service image"
|
||
create_manila_service_image
|
||
else
|
||
echo_summary "Skipping download of Manila service image"
|
||
fi
|
||
|
||
if is_service_enabled nova; then
|
||
echo_summary "Creating Manila service keypair"
|
||
create_manila_service_keypair
|
||
fi
|
||
|
||
echo_summary "Configure Samba server"
|
||
configure_samba
|
||
|
||
echo_summary "Configuring IPv6"
|
||
if [ $(trueorfalse False MANILA_SETUP_IPV6) == True ]; then
|
||
setup_ipv6
|
||
fi
|
||
|
||
echo_summary "Starting Manila API"
|
||
start_manila_api
|
||
|
||
# Workaround for bug #1660304
|
||
if [ "$SHARE_DRIVER" != "manila.share.drivers.generic.GenericShareDriver" ]; then
|
||
echo_summary "Starting rest of Manila services - scheduler, share and data"
|
||
start_rest_of_manila
|
||
fi
|
||
|
||
echo_summary "Creating Manila default share type"
|
||
create_default_share_type
|
||
|
||
echo_summary "Creating Manila default share group type"
|
||
create_default_share_group_type
|
||
|
||
echo_summary "Creating Manila custom share types"
|
||
create_custom_share_types
|
||
|
||
echo_summary "Manila UI is no longer enabled by default. \
|
||
Add enable_plugin manila-ui github.com/openstack/manila-ui \
|
||
to your local.conf file to enable Manila UI"
|
||
|
||
elif [[ "$1" == "stack" && "$2" == "test-config" ]]; then
|
||
###########################################################################
|
||
# NOTE(vponomaryov): Workaround for bug #1660304
|
||
# We are able to create Nova VMs now only when last Nova step is performed
|
||
# which is registration of cell0. It is registered as last action in
|
||
# "post-extra" section.
|
||
if is_service_enabled nova; then
|
||
echo_summary "Creating Manila service VMs for generic driver \
|
||
backends for which handlng of share servers is disabled."
|
||
create_service_share_servers
|
||
fi
|
||
|
||
if [ "$SHARE_DRIVER" == "manila.share.drivers.generic.GenericShareDriver" ]; then
|
||
echo_summary "Starting rest of Manila services - scheduler, share and data"
|
||
start_rest_of_manila
|
||
fi
|
||
###########################################################################
|
||
|
||
echo_summary "Update Tempest config"
|
||
update_tempest
|
||
fi
|
||
|
||
if [[ "$1" == "unstack" ]]; then
|
||
cleanup_manila
|
||
fi
|
||
|
||
if [[ "$1" == "clean" ]]; then
|
||
cleanup_manila
|
||
sudo rm -rf /etc/manila
|
||
fi
|
||
|
||
# Restore xtrace
|
||
$XTRACE
|