manila/manila_tempest_tests/config.py
Marc Koderer e3afcd751f Add MTU information in DB and API
MTU value can be different for each neutron network.
E.g. for high-performance use-cases it's very important to also
support MTU's with jumbo frames.

This patch exposes this information to the drivers. Each driver
should setup its resources accordingly.

The tempest test actually just covers the api change. Better coverage will
be added when the container driver lands.

APIImpact
DocImpact

Change-Id: I9b4efae620ec9f6790547c8fffc58872d43277f5
Implements: bp add-network-mtu
Related-Bug: #1612528
2016-08-12 15:14:14 +02:00

211 lines
9.9 KiB
Python

# Copyright 2014 Mirantis Inc.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
from __future__ import print_function
from oslo_config import cfg
service_available_group = cfg.OptGroup(name="service_available",
title="Available OpenStack Services")
ServiceAvailableGroup = [
cfg.BoolOpt("manila",
default=True,
help="Whether or not manila is expected to be available"),
]
share_group = cfg.OptGroup(name="share", title="Share Service Options")
ShareGroup = [
cfg.StrOpt("min_api_microversion",
default="2.0",
help="The minimum api microversion is configured to be the "
"value of the minimum microversion supported by Manila."),
cfg.StrOpt("max_api_microversion",
default="2.20",
help="The maximum api microversion is configured to be the "
"value of the latest microversion supported by Manila."),
cfg.StrOpt("region",
default="",
help="The share region name to use. If empty, the value "
"of identity.region is used instead. If no such region "
"is found in the service catalog, the first found one is "
"used."),
cfg.StrOpt("catalog_type",
default="share",
help="Catalog type of the Share service."),
cfg.StrOpt('endpoint_type',
default='publicURL',
choices=['public', 'admin', 'internal',
'publicURL', 'adminURL', 'internalURL'],
help="The endpoint type to use for the share service."),
cfg.BoolOpt("multitenancy_enabled",
default=True,
help="This option used to determine backend driver type, "
"multitenant driver uses share-networks, but "
"single-tenant doesn't."),
cfg.BoolOpt("create_networks_when_multitenancy_enabled",
default=True,
help="This option is used only when other "
"'multitenancy_enabled' option is set to 'True'. "
"If this one is set to True, then tempest will create "
"neutron networks for each new manila share-network "
"it creates. Else it will use manila share-networks with "
"empty values (case of StandAloneNetworkPlugin and "
"NeutronSingleNetworkPlugin)."),
cfg.ListOpt("enable_protocols",
default=["nfs", "cifs"],
help="First value of list is protocol by default, "
"items of list show enabled protocols at all."),
cfg.ListOpt("enable_ip_rules_for_protocols",
default=["nfs", "cifs", ],
help="Selection of protocols, that should "
"be covered with ip rule tests"),
cfg.ListOpt("enable_user_rules_for_protocols",
default=[],
help="Selection of protocols, that should "
"be covered with user rule tests"),
cfg.ListOpt("enable_cert_rules_for_protocols",
default=["glusterfs", ],
help="Protocols that should be covered with cert rule tests."),
cfg.ListOpt("enable_cephx_rules_for_protocols",
default=["cephfs", ],
help="Protocols to be covered with cephx rule tests."),
cfg.StrOpt("username_for_user_rules",
default="Administrator",
help="Username, that will be used in user tests."),
cfg.ListOpt("enable_ro_access_level_for_protocols",
default=["nfs", ],
help="List of protocols to run tests with ro access level."),
# Capabilities
cfg.StrOpt("capability_storage_protocol",
deprecated_name="storage_protocol",
default="NFS_CIFS",
help="Backend protocol to target when creating volume types."),
cfg.BoolOpt("capability_snapshot_support",
help="Defines extra spec that satisfies specific back end "
"capability called 'snapshot_support' and will be used "
"for setting up custom share type. Defaults to value of "
"other config option 'run_snapshot_tests'."),
cfg.StrOpt("share_network_id",
default="",
help="Some backend drivers requires share network "
"for share creation. Share network id, that will be "
"used for shares. If not set, it won't be used."),
cfg.StrOpt("alt_share_network_id",
default="",
help="Share network id, that will be used for shares"
" in alt tenant. If not set, it won't be used"),
cfg.StrOpt("admin_share_network_id",
default="",
help="Share network id, that will be used for shares"
" in admin tenant. If not set, it won't be used"),
cfg.BoolOpt("multi_backend",
default=False,
help="Runs Manila multi-backend tests."),
cfg.ListOpt("backend_names",
default=[],
help="Names of share backends, that will be used with "
"multibackend tests. Tempest will use first two values."),
cfg.IntOpt("share_creation_retry_number",
default=0,
help="Defines number of retries for share creation. "
"It is useful to avoid failures caused by unstable "
"environment."),
cfg.IntOpt("build_interval",
default=3,
help="Time in seconds between share availability checks."),
cfg.IntOpt("build_timeout",
default=500,
help="Timeout in seconds to wait for a share to become"
"available."),
cfg.BoolOpt("suppress_errors_in_cleanup",
default=False,
help="Whether to suppress errors with clean up operation "
"or not. There are cases when we may want to skip "
"such errors and catch only test errors."),
# Switching ON/OFF test suites filtered by features
cfg.BoolOpt("run_quota_tests",
default=True,
help="Defines whether to run quota tests or not."),
cfg.BoolOpt("run_extend_tests",
default=True,
help="Defines whether to run share extend tests or not. "
"Disable this feature if used driver doesn't "
"support it."),
cfg.BoolOpt("run_shrink_tests",
default=True,
help="Defines whether to run share shrink tests or not. "
"Disable this feature if used driver doesn't "
"support it."),
cfg.BoolOpt("run_snapshot_tests",
default=True,
help="Defines whether to run tests that use share snapshots "
"or not. Disable this feature if used driver doesn't "
"support it."),
cfg.BoolOpt("run_consistency_group_tests",
default=True,
help="Defines whether to run consistency group tests or not. "
"Disable this feature if used driver doesn't support "
"it."),
cfg.BoolOpt("run_replication_tests",
default=False,
help="Defines whether to run replication tests or not. "
"Enable this feature if the driver is configured "
"for replication."),
cfg.BoolOpt("run_migration_tests",
default=False,
help="Enable or disable migration tests."),
cfg.BoolOpt("run_manage_unmanage_tests",
default=False,
help="Defines whether to run manage/unmanage tests or not. "
"These test may leave orphaned resources, so be careful "
"enabling this opt."),
cfg.BoolOpt("run_manage_unmanage_snapshot_tests",
default=False,
help="Defines whether to run manage/unmanage snapshot tests "
"or not. These tests may leave orphaned resources, so be "
"careful enabling this opt."),
cfg.StrOpt("image_with_share_tools",
default="manila-service-image",
help="Image name for vm booting with nfs/smb clients tool."),
cfg.StrOpt("image_username",
default="manila",
help="Image username."),
cfg.StrOpt("image_password",
help="Image password. Should be used for "
"'image_with_share_tools' without Nova Metadata support."),
cfg.StrOpt("client_vm_flavor_ref",
default="100",
help="Flavor used for client vm in scenario tests."),
cfg.IntOpt("migration_timeout",
default=1500,
help="Time to wait for share migration before "
"timing out (seconds)."),
cfg.StrOpt("default_share_type_name",
help="Default share type name to use in tempest tests."),
cfg.StrOpt("backend_replication_type",
default='none',
choices=['none', 'writable', 'readable', 'dr'],
help="Specify the replication type supported by the backend."),
cfg.IntOpt("share_size",
default=1,
help="Default size in GB for shares created by share tests."),
]