Also fix quagga configuration file (router line needs to be before its parameters), restart step for systemd, and REMOTE_AS incorrect hint Change-Id: I899aef63608f76907a3f28d67004af3fb5d0d8e6
30 KiB
Testing
Dynamic routing enables advertisement of self-service network prefixes to physical network devices that support a dynamic routing protocol, such as routers. The Neutron dynamic routing project consists of a service plugin-in and an agent that can advertise Neutron private network to outside of OpenStack. This document will describe how to test the Dynamic Routing functionalities, introduce what the environment architecture is for dynamic routing test and show how to setup dynamic routing environment using Devstack.
Environment Architecture
Use the following example architecture as a test environment to deploy neutron-dynamic-routing in your environment. The example architecture will deploy an all-in-one OpenStack and connect to an Ubuntu VM running Quagga as a router outside of OpenStack. See following:
+--------------+
10.156.18.20 | |
+----------------------------------| Quagga |
| BGP Peering Session | Router |
| | 172.24.4.3 |
| +--------------+
| |
|10.156.18.21 | External Network(172.24.4.0/24)
--------------------------------------------------------------------------------------------------
|eth0
+---------------------------------------+
| | |
| | br-ex |
| +----------------+ |
| | |172.24.4.1 |
| +------------+ +-------+ |
| | | |Router | |
| | Dr-Agent | | | |
| | | +-------+ |
| +------------+ | |
| ---------------- |
| Tenant Network |
| (10.0.0.0/24) |
| |
+---------------------------------------+
All-In-One OpenStack Installation
Devstack Setup
Download devstack:
git clone https://opendev.org/openstack/devstack.git
Enable neutron-dynamic-routing by including this in your local.conf file:
[[local|localrc]] enable_plugin neutron-dynamic-routing https://opendev.org/openstack/neutron-dynamic-routing
Run devstack:
./stack.sh
Quagga Configure
Quagga is a network routing software available in most GNU/Linux, Solaris, FreeBSD, and NetBSD. It provides the implementation of OSPF, RIP, BGP and IS-IS. This section shows you how to install Quagga and then configure it on Ubuntu Linux.
Install Quagga using apt-get:
$ sudo apt-get install quagga quagga-doc
Create an empty file (/etc/quagga/zebra.conf) and set permissions.
The Quagga files and configurations will be stored in /etc/quagga:
$ sudo touch /etc/quagga/zebra.conf $ sudo chown quagga.quagga /etc/quagga/zebra.conf $ sudo chmod 640 /etc/quagga/zebra.conf
Update quagga daemon file.
You can enable/disable the daemons routing in the /etc/quagga/daemons file. Update /etc/quagga/daemons to enable zebra and bgp:
zebra=yes bgpd=yes ospfd=no ospf6d=no ripd=no ripngd=no isisd=no
Update /etc/quagga/zebra.conf:
# Zebra configuration # name of the router hostname quagga_1 password zebra # log log file /var/log/quagga/zebra.log
Update /etc/quagga/bgpd.conf:
# declare a router with local-as 1000 router bgp 1000 # set router-id to the network address we announce bgp router-id 10.156.18.20 # expose neighbor network which dynamic routing agent is using neighbor 10.156.18.21 remote-as 12345 # treat neutron dynamic routing agent as a passive peer in case # quagga keeps making futile connection attempts neighbor 10.156.18.21 passive # log log file /var/log/quagga/bgpd.log debug bgp events debug bgp filters debug bgp fsm debug bgp keepalives debug bgp updates
Restart the Quagga daemon:
$ sudo systemcl restart bgpd
Service Test
As the dynamic routing is only supported by admin, source the devstack admin credentials:
$ . devstack/openrc admin admin
Verify that the neutron dynamic routing agent is running.
$ openstack network agent list --agent-type bgp +--------------------+--------------------+--------------------+-------------------+-------+-------+---------------------+ | ID | Agent Type | Host | Availability Zone | Alive | State | Binary | +--------------------+--------------------+--------------------+-------------------+-------+-------+---------------------+ | 69ad386f-e055-4284 | BGP dynamic | devstack-bgp-dr | | :-) | UP | neutron-bgp-dragent | | -8c8e-ef9bd540705c | routing agent | | | | | | +--------------------+--------------------+--------------------+-------------------+-------+-------+---------------------+
Create an address scope.
The provider(external) and tenant networks must belong to the same address scope for the agent to advertise those tenant network prefixes.
$ openstack address scope create --ip-version 4 --share public +------------+--------------------------------------+ | Field | Value | +------------+--------------------------------------+ | id | c02c358a-9d35-43ea-8313-986b3e4a91c0 | | ip_version | 4 | | name | public | | project_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | | shared | True | +------------+--------------------------------------+
Create subnet pools. The provider and tenant networks use different pools.
- Create the provider network pool.
$ openstack subnet pool create --pool-prefix 172.24.4.0/24 \ --address-scope public provider +-------------------+--------------------------------------+ | Field | Value | +-------------------+--------------------------------------+ | address_scope_id | 18f74828-5f38-4d84-b030-ed642f2157c5 | | created_at | 2020-08-28T15:12:11Z | | default_prefixlen | 8 | | default_quota | None | | description | | | id | d812a10e-5981-4686-90c4-d6fff454b38a | | ip_version | 4 | | is_default | False | | max_prefixlen | 32 | | min_prefixlen | 8 | | name | provider | | prefixes | 172.24.4.0/24 | | project_id | 17c884da94bc4259b20ace3da6897297 | | revision_number | 0 | | shared | False | | tags | | | updated_at | 2020-08-28T15:12:11Z | +-------------------+--------------------------------------+
- Create tenant network pool.
$ openstack subnet pool create --pool-prefix 10.0.0.0/16 \ --address-scope public --share selfservice +-------------------+--------------------------------------+ | Field | Value | +-------------------+--------------------------------------+ | address_scope_id | 18f74828-5f38-4d84-b030-ed642f2157c5 | | created_at | 2020-08-28T15:15:31Z | | default_prefixlen | 8 | | default_quota | None | | description | | | id | 8b9d1c9b-6aba-416f-8d10-1e7a0f6052f6 | | ip_version | 4 | | is_default | False | | max_prefixlen | 32 | | min_prefixlen | 8 | | name | selfservice | | prefixes | 10.0.0.0/16 | | project_id | 17c884da94bc4259b20ace3da6897297 | | revision_number | 0 | | shared | True | | tags | | | updated_at | 2020-08-28T15:15:31Z | +-------------------+--------------------------------------+
Create the provider and tenant networks.
- Create the provider network.
$ openstack network create --external --provider-network-type flat \ --provider-physical-network public provider +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | UP | | availability_zone_hints | | | availability_zones | | | created_at | 2020-08-28T15:24:07Z | | description | | | dns_domain | | | id | 18f9a9c0-f8f5-4360-822a-b687c1008bf7 | | ipv4_address_scope | None | | ipv6_address_scope | None | | is_default | False | | is_vlan_transparent | None | | mtu | 1500 | | name | provider | | port_security_enabled | True | | project_id | 17c884da94bc4259b20ace3da6897297 | | provider:network_type | flat | | provider:physical_network | public | | provider:segmentation_id | None | | qos_policy_id | None | | revision_number | 1 | | router:external | External | | segments | None | | shared | False | | status | ACTIVE | | subnets | | | tags | | | updated_at | 2020-08-28T15:24:07Z | +---------------------------+--------------------------------------+
- Create a subnet on the provider network using an IP address allocation from the provider subnet pool.
$ openstack subnet create --network provider --subnet-pool provider \ --prefix-length 24 provider +----------------------+--------------------------------------+ | Field | Value | +----------------------+--------------------------------------+ | allocation_pools | 172.24.4.2-172.24.4.254 | | cidr | 172.24.4.0/24 | | created_at | 2020-08-28T15:27:00Z | | description | | | dns_nameservers | | | dns_publish_fixed_ip | False | | enable_dhcp | True | | gateway_ip | 172.24.4.1 | | host_routes | | | id | 4ed8ac88-2c19-4f94-9362-7b301e743438 | | ip_version | 4 | | ipv6_address_mode | None | | ipv6_ra_mode | None | | name | provider | | network_id | 18f9a9c0-f8f5-4360-822a-b687c1008bf7 | | prefix_length | 24 | | project_id | 17c884da94bc4259b20ace3da6897297 | | revision_number | 0 | | segment_id | None | | service_types | | | subnetpool_id | a8fecc3d-a489-46ca-87fb-dff4e3371503 | | tags | | | updated_at | 2020-08-28T15:27:00Z | +----------------------+--------------------------------------+
- Create the tenant network.
$ openstack network create private +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | UP | | availability_zone_hints | | | availability_zones | | | created_at | 2020-08-28T15:28:06Z | | description | | | dns_domain | | | id | 43643543-6edb-4c2b-a087-4553b75b6799 | | ipv4_address_scope | None | | ipv6_address_scope | None | | is_default | False | | is_vlan_transparent | None | | mtu | 1442 | | name | private | | port_security_enabled | True | | project_id | 17c884da94bc4259b20ace3da6897297 | | provider:network_type | geneve | | provider:physical_network | None | | provider:segmentation_id | 1 | | qos_policy_id | None | | revision_number | 1 | | router:external | Internal | | segments | None | | shared | False | | status | ACTIVE | | subnets | | | tags | | | updated_at | 2020-08-28T15:28:06Z | +---------------------------+--------------------------------------+
- Create a subnet on the tenant network using an IP address allocation from the private subnet pool.
$ openstack subnet create --network private --subnet-pool selfservice \ --prefix-length 24 selfservice +----------------------+--------------------------------------+ | Field | Value | +----------------------+--------------------------------------+ | allocation_pools | 10.0.0.2-10.0.0.254 | | cidr | 10.0.0.0/24 | | created_at | 2020-08-28T15:29:20Z | | description | | | dns_nameservers | | | dns_publish_fixed_ip | False | | enable_dhcp | True | | gateway_ip | 10.0.0.1 | | host_routes | | | id | 12eec8cb-8303-4829-8b16-e9a75072fcb0 | | ip_version | 4 | | ipv6_address_mode | None | | ipv6_ra_mode | None | | name | selfservice | | network_id | 43643543-6edb-4c2b-a087-4553b75b6799 | | prefix_length | 24 | | project_id | 17c884da94bc4259b20ace3da6897297 | | revision_number | 0 | | segment_id | None | | service_types | | | subnetpool_id | 574f9d33-65b6-49a1-ab43-866085d06804 | | tags | | | updated_at | 2020-08-28T15:29:20Z | +----------------------+--------------------------------------+
Create and configure router
- Create a router.
$ openstack router create router +-------------------------+--------------------------------------+ | Field | Value | +-------------------------+--------------------------------------+ | admin_state_up | UP | | availability_zone_hints | | | availability_zones | | | created_at | 2020-08-28T15:30:09Z | | description | | | external_gateway_info | null | | flavor_id | None | | id | 250e5cc1-4cfc-4dff-a3a3-eb206c071621 | | name | router | | project_id | 17c884da94bc4259b20ace3da6897297 | | revision_number | 1 | | routes | | | status | ACTIVE | | tags | | | updated_at | 2020-08-28T15:30:09Z | +-------------------------+--------------------------------------+
- Add the private subnet as an interface on the router.
$ openstack router add subnet router selfservice
- Add the provide network as a gateway on the router
$ openstack router set --external-gateway provider router
- Verify router ports. Note: from this result, you can see what the advertised routes are.
$ openstack port list --router router +--------------------------------------+------+-------------------+----------------------------------------------------------------------------+--------+ | ID | Name | MAC Address | Fixed IP Addresses | Status | +--------------------------------------+------+-------------------+----------------------------------------------------------------------------+--------+ | 218c455f-f565-4e37-a2ac-999da24efa66 | | fa:16:3e:74:d8:61 | ip_address='10.0.0.1', subnet_id='12eec8cb-8303-4829-8b16-e9a75072fcb0' | ACTIVE | | 44dcb7d3-b444-4177-82a1-233b1f3bed23 | | fa:16:3e:5b:4b:2d | ip_address='172.24.4.24', subnet_id='4ed8ac88-2c19-4f94-9362-7b301e743438' | ACTIVE | +--------------------------------------+------+-------------------+----------------------------------------------------------------------------+--------+
Create and configure the BGP speaker
The BGP speaker advertised the next-hop IP address for the tenant network prefix.
- Create the BGP speaker.
Replace LOCAL_AS with an appropriate local autonomous system number. The example configuration uses AS 12345.
$ openstack bgp speaker create --ip-version 4 \ --local-as LOCAL_AS bgp-speaker +-----------------------------------+--------------------------------------+ | Field | Value | +-----------------------------------+--------------------------------------+ | advertise_floating_ip_host_routes | True | | advertise_tenant_networks | True | | id | 19cdf669-4d4d-442f-bbf6-510a97ad8cd8 | | ip_version | 4 | | local_as | 12345 | | name | bgp-speaker | | networks | [] | | peers | [] | | project_id | 17c884da94bc4259b20ace3da6897297 | +-----------------------------------+--------------------------------------+
- Associate the BGP speaker with the provider network.
A BGP speaker requires association with a provider network to determine eligible prefixes. After the association, the BGP speaker can advertise the tenant network prefixes with the corresponding router as the next-hop IP address.
$ openstack bgp speaker add network bgp-speaker provider
- Verify the association of the provider network with the BGP speaker.
Checking the
networks
attribute.$ openstack bgp speaker show bgp-speaker +-----------------------------------+------------------------------------------+ | Field | Value | +-----------------------------------+------------------------------------------+ | advertise_floating_ip_host_routes | True | | advertise_tenant_networks | True | | id | 19cdf669-4d4d-442f-bbf6-510a97ad8cd8 | | ip_version | 4 | | local_as | 12345 | | name | bgp-speaker | | networks | ['18f9a9c0-f8f5-4360-822a-b687c1008bf7'] | | peers | [] | | project_id | 17c884da94bc4259b20ace3da6897297 | +-----------------------------------+------------------------------------------+
- Verify the prefixes and next-hop ip addresses that the BGP speaker advertises.
$ openstack bgp speaker list advertised routes bgp-speaker +-------------+------------+ | destination | next_hop | +-------------+------------+ | 10.0.0.0/24 | 172.24.4.3 | +-------------+------------+
- Create a BGP peer.
Here the BGP peer is pointed to the quagga VM. Replace REMOTE_AS with an appropriate remote autonomous system number. The example configuration uses AS 12345 which triggers iBGP peering.
$ openstack bgp peer create --peer-ip 10.156.18.20 \ --remote-as REMOTE_AS bgp-peer +------------+--------------------------------------+ | Field | Value | +------------+--------------------------------------+ | auth_type | none | | id | 37291604-de77-4333-8f27-4ca336e021f2 | | name | bgp-peer | | peer_ip | 10.156.18.20 | | project_id | 17c884da94bc4259b20ace3da6897297 | | remote_as | 12345 | +------------+--------------------------------------+
- Add a BGP peer to the BGP speaker.
$ openstack bgp speaker add peer bgp-speaker bgp-peer
- Verify the association of the BGP peer with the BGP speaker.
Checking the
peers
attribute.$ openstack bgp speaker show bgp-speaker +-----------------------------------+------------------------------------------+ | Field | Value | +-----------------------------------+------------------------------------------+ | advertise_floating_ip_host_routes | True | | advertise_tenant_networks | True | | id | 19cdf669-4d4d-442f-bbf6-510a97ad8cd8 | | ip_version | 4 | | local_as | 12345 | | name | bgp-speaker | | networks | ['18f9a9c0-f8f5-4360-822a-b687c1008bf7'] | | peers | ['37291604-de77-4333-8f27-4ca336e021f2'] | | project_id | 17c884da94bc4259b20ace3da6897297 | +-----------------------------------+------------------------------------------+
Schedule the BGP speaker to an agent.
- Schedule the BGP speaker to
BGP dynamic routing agent
The first BGP speaker is scheduled to the first dynamic routing agent automatically. So for a simple setup, there is nothing to be done here.
- Verify scheduling of the BGP speaker to the agent.
$ openstack bgp dragent list --bgp-speaker bgp-speaker +--------------------------------------+---------------------------+----------------+-------+ | id | host | admin_state_up | alive | +--------------------------------------+---------------------------+----------------+-------+ | 239996c8-2d59-4131-98b8-d64372c812cc | devstack-bgp-dr | True | :-) | +--------------------------------------+---------------------------+----------------+-------+
- Schedule the BGP speaker to