619 lines
20 KiB
Python
619 lines
20 KiB
Python
# Copyright (c) 2012 OpenStack Foundation.
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
|
|
# implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
|
|
# TODO(salv-orlando): Verify if a single set of operational
|
|
# status constants is achievable
|
|
NET_STATUS_ACTIVE = 'ACTIVE'
|
|
NET_STATUS_BUILD = 'BUILD'
|
|
NET_STATUS_DOWN = 'DOWN'
|
|
NET_STATUS_ERROR = 'ERROR'
|
|
|
|
PORT_STATUS_ACTIVE = 'ACTIVE'
|
|
PORT_STATUS_BUILD = 'BUILD'
|
|
PORT_STATUS_DOWN = 'DOWN'
|
|
PORT_STATUS_ERROR = 'ERROR'
|
|
PORT_STATUS_NOTAPPLICABLE = 'N/A'
|
|
|
|
FLOATINGIP_STATUS_ACTIVE = 'ACTIVE'
|
|
FLOATINGIP_STATUS_DOWN = 'DOWN'
|
|
FLOATINGIP_STATUS_ERROR = 'ERROR'
|
|
|
|
# Service operation status constants
|
|
ACTIVE = "ACTIVE"
|
|
DOWN = "DOWN"
|
|
CREATED = "CREATED"
|
|
PENDING_CREATE = "PENDING_CREATE"
|
|
PENDING_UPDATE = "PENDING_UPDATE"
|
|
PENDING_DELETE = "PENDING_DELETE"
|
|
INACTIVE = "INACTIVE"
|
|
ERROR = "ERROR"
|
|
|
|
DEVICE_OWNER_COMPUTE_PREFIX = "compute:"
|
|
DEVICE_OWNER_NETWORK_PREFIX = "network:"
|
|
DEVICE_OWNER_NEUTRON_PREFIX = "neutron:"
|
|
DEVICE_OWNER_BAREMETAL_PREFIX = "baremetal:"
|
|
|
|
DEVICE_OWNER_ROUTER_HA_INTF = (DEVICE_OWNER_NETWORK_PREFIX +
|
|
"router_ha_interface")
|
|
DEVICE_OWNER_HA_REPLICATED_INT = (DEVICE_OWNER_NETWORK_PREFIX +
|
|
"ha_router_replicated_interface")
|
|
DEVICE_OWNER_ROUTER_INTF = DEVICE_OWNER_NETWORK_PREFIX + "router_interface"
|
|
DEVICE_OWNER_ROUTER_GW = DEVICE_OWNER_NETWORK_PREFIX + "router_gateway"
|
|
DEVICE_OWNER_FLOATINGIP = DEVICE_OWNER_NETWORK_PREFIX + "floatingip"
|
|
DEVICE_OWNER_DHCP = DEVICE_OWNER_NETWORK_PREFIX + "dhcp"
|
|
DEVICE_OWNER_DVR_INTERFACE = (DEVICE_OWNER_NETWORK_PREFIX +
|
|
"router_interface_distributed")
|
|
DEVICE_OWNER_AGENT_GW = (DEVICE_OWNER_NETWORK_PREFIX +
|
|
"floatingip_agent_gateway")
|
|
DEVICE_OWNER_ROUTER_SNAT = (DEVICE_OWNER_NETWORK_PREFIX +
|
|
"router_centralized_snat")
|
|
DEVICE_OWNER_LOADBALANCER = DEVICE_OWNER_NEUTRON_PREFIX + "LOADBALANCER"
|
|
DEVICE_OWNER_LOADBALANCERV2 = DEVICE_OWNER_NEUTRON_PREFIX + "LOADBALANCERV2"
|
|
|
|
DEVICE_OWNER_PREFIXES = (DEVICE_OWNER_NETWORK_PREFIX,
|
|
DEVICE_OWNER_NEUTRON_PREFIX)
|
|
|
|
# Collection used to identify devices owned by router interfaces.
|
|
# DEVICE_OWNER_ROUTER_HA_INTF is a special case and so is not included.
|
|
ROUTER_INTERFACE_OWNERS = (DEVICE_OWNER_ROUTER_INTF,
|
|
DEVICE_OWNER_HA_REPLICATED_INT,
|
|
DEVICE_OWNER_DVR_INTERFACE)
|
|
ROUTER_INTERFACE_OWNERS_SNAT = (DEVICE_OWNER_ROUTER_INTF,
|
|
DEVICE_OWNER_HA_REPLICATED_INT,
|
|
DEVICE_OWNER_DVR_INTERFACE,
|
|
DEVICE_OWNER_ROUTER_SNAT)
|
|
|
|
DEVICE_ID_RESERVED_DHCP_PORT = 'reserved_dhcp_port'
|
|
|
|
FLOATINGIP_KEY = '_floatingips'
|
|
PORT_FORWARDING_FLOATINGIP_KEY = '_pf_floatingips'
|
|
INTERFACE_KEY = '_interfaces'
|
|
HA_INTERFACE_KEY = '_ha_interface'
|
|
|
|
IPv4 = 'IPv4'
|
|
IPv6 = 'IPv6'
|
|
IP_VERSION_4 = 4
|
|
IP_VERSION_6 = 6
|
|
IPv4_BITS = 32
|
|
IPv6_BITS = 128
|
|
|
|
INVALID_MAC_ADDRESSES = ['00:00:00:00:00:00', 'FF:FF:FF:FF:FF:FF']
|
|
|
|
IPv4_ANY = '0.0.0.0/0'
|
|
IPv6_ANY = '::/0'
|
|
IP_ANY = {IP_VERSION_4: IPv4_ANY, IP_VERSION_6: IPv6_ANY}
|
|
|
|
IPv6_LLA_PREFIX = 'fe80::/64'
|
|
|
|
DHCP_RESPONSE_PORT = 68
|
|
DHCPV6_CLIENT_PORT = 546
|
|
|
|
FLOODING_ENTRY = ('00:00:00:00:00:00', '0.0.0.0')
|
|
|
|
AGENT_TYPE_DHCP = 'DHCP agent'
|
|
AGENT_TYPE_OVS = 'Open vSwitch agent'
|
|
AGENT_TYPE_LINUXBRIDGE = 'Linux bridge agent'
|
|
AGENT_TYPE_OFA = 'OFA driver agent'
|
|
AGENT_TYPE_L3 = 'L3 agent'
|
|
AGENT_TYPE_LOADBALANCER = 'Loadbalancer agent'
|
|
AGENT_TYPE_METERING = 'Metering agent'
|
|
AGENT_TYPE_METADATA = 'Metadata agent'
|
|
AGENT_TYPE_NIC_SWITCH = 'NIC Switch agent'
|
|
AGENT_TYPE_MACVTAP = 'Macvtap agent'
|
|
L2_AGENT_TOPIC = 'N/A'
|
|
|
|
L3_AGENT_MODE_DVR = 'dvr'
|
|
L3_AGENT_MODE_DVR_SNAT = 'dvr_snat'
|
|
L3_AGENT_MODE_LEGACY = 'legacy'
|
|
L3_AGENT_MODE = 'agent_mode'
|
|
L3_AGENT_MODE_DVR_NO_EXTERNAL = 'dvr_no_external'
|
|
|
|
DVR_SNAT_BOUND = 'dvr_snat_bound'
|
|
PORT_BINDING_EXT_ALIAS = 'binding'
|
|
L3_AGENT_SCHEDULER_EXT_ALIAS = 'l3_agent_scheduler'
|
|
DHCP_AGENT_SCHEDULER_EXT_ALIAS = 'dhcp_agent_scheduler'
|
|
LBAAS_AGENT_SCHEDULER_EXT_ALIAS = 'lbaas_agent_scheduler'
|
|
L3_DISTRIBUTED_EXT_ALIAS = 'dvr'
|
|
L3_HA_MODE_EXT_ALIAS = 'l3-ha'
|
|
SUBNET_ALLOCATION_EXT_ALIAS = 'subnet_allocation'
|
|
|
|
# Protocol names and numbers for Security Groups/Firewalls
|
|
PROTO_NAME_AH = 'ah'
|
|
PROTO_NAME_DCCP = 'dccp'
|
|
PROTO_NAME_EGP = 'egp'
|
|
PROTO_NAME_ESP = 'esp'
|
|
PROTO_NAME_GRE = 'gre'
|
|
PROTO_NAME_HOPOPT = 'hopopt'
|
|
PROTO_NAME_ICMP = 'icmp'
|
|
PROTO_NAME_IGMP = 'igmp'
|
|
PROTO_NAME_IP = 'ip'
|
|
PROTO_NAME_IPIP = 'ipip'
|
|
PROTO_NAME_IPV6_ENCAP = 'ipv6-encap'
|
|
PROTO_NAME_IPV6_FRAG = 'ipv6-frag'
|
|
PROTO_NAME_IPV6_ICMP = 'ipv6-icmp'
|
|
# For backward-compatibility of security group rule API, we keep the old value
|
|
# for IPv6 ICMP. It should be clean up in the future.
|
|
PROTO_NAME_IPV6_ICMP_LEGACY = 'icmpv6'
|
|
PROTO_NAME_IPV6_NONXT = 'ipv6-nonxt'
|
|
PROTO_NAME_IPV6_OPTS = 'ipv6-opts'
|
|
PROTO_NAME_IPV6_ROUTE = 'ipv6-route'
|
|
PROTO_NAME_OSPF = 'ospf'
|
|
PROTO_NAME_PGM = 'pgm'
|
|
PROTO_NAME_RSVP = 'rsvp'
|
|
PROTO_NAME_SCTP = 'sctp'
|
|
PROTO_NAME_TCP = 'tcp'
|
|
PROTO_NAME_UDP = 'udp'
|
|
PROTO_NAME_UDPLITE = 'udplite'
|
|
PROTO_NAME_VRRP = 'vrrp'
|
|
|
|
PROTO_NUM_AH = 51
|
|
PROTO_NUM_DCCP = 33
|
|
PROTO_NUM_EGP = 8
|
|
PROTO_NUM_ESP = 50
|
|
PROTO_NUM_GRE = 47
|
|
PROTO_NUM_HOPOPT = 0
|
|
PROTO_NUM_ICMP = 1
|
|
PROTO_NUM_IGMP = 2
|
|
PROTO_NUM_IP = 0
|
|
PROTO_NUM_IPIP = 4
|
|
PROTO_NUM_IPV6_ENCAP = 41
|
|
PROTO_NUM_IPV6_FRAG = 44
|
|
PROTO_NUM_IPV6_ICMP = 58
|
|
PROTO_NUM_IPV6_NONXT = 59
|
|
PROTO_NUM_IPV6_OPTS = 60
|
|
PROTO_NUM_IPV6_ROUTE = 43
|
|
PROTO_NUM_OSPF = 89
|
|
PROTO_NUM_PGM = 113
|
|
PROTO_NUM_RSVP = 46
|
|
PROTO_NUM_SCTP = 132
|
|
PROTO_NUM_TCP = 6
|
|
PROTO_NUM_UDP = 17
|
|
PROTO_NUM_UDPLITE = 136
|
|
PROTO_NUM_VRRP = 112
|
|
|
|
IP_PROTOCOL_MAP = {PROTO_NAME_AH: PROTO_NUM_AH,
|
|
PROTO_NAME_DCCP: PROTO_NUM_DCCP,
|
|
PROTO_NAME_EGP: PROTO_NUM_EGP,
|
|
PROTO_NAME_ESP: PROTO_NUM_ESP,
|
|
PROTO_NAME_GRE: PROTO_NUM_GRE,
|
|
PROTO_NAME_HOPOPT: PROTO_NUM_HOPOPT,
|
|
PROTO_NAME_ICMP: PROTO_NUM_ICMP,
|
|
PROTO_NAME_IGMP: PROTO_NUM_IGMP,
|
|
PROTO_NAME_IP: PROTO_NUM_IP,
|
|
PROTO_NAME_IPIP: PROTO_NUM_IPIP,
|
|
PROTO_NAME_IPV6_ENCAP: PROTO_NUM_IPV6_ENCAP,
|
|
PROTO_NAME_IPV6_FRAG: PROTO_NUM_IPV6_FRAG,
|
|
PROTO_NAME_IPV6_ICMP: PROTO_NUM_IPV6_ICMP,
|
|
# For backward-compatibility of security group rule API
|
|
PROTO_NAME_IPV6_ICMP_LEGACY: PROTO_NUM_IPV6_ICMP,
|
|
PROTO_NAME_IPV6_NONXT: PROTO_NUM_IPV6_NONXT,
|
|
PROTO_NAME_IPV6_OPTS: PROTO_NUM_IPV6_OPTS,
|
|
PROTO_NAME_IPV6_ROUTE: PROTO_NUM_IPV6_ROUTE,
|
|
PROTO_NAME_OSPF: PROTO_NUM_OSPF,
|
|
PROTO_NAME_PGM: PROTO_NUM_PGM,
|
|
PROTO_NAME_RSVP: PROTO_NUM_RSVP,
|
|
PROTO_NAME_SCTP: PROTO_NUM_SCTP,
|
|
PROTO_NAME_TCP: PROTO_NUM_TCP,
|
|
PROTO_NAME_UDP: PROTO_NUM_UDP,
|
|
PROTO_NAME_UDPLITE: PROTO_NUM_UDPLITE,
|
|
PROTO_NAME_VRRP: PROTO_NUM_VRRP}
|
|
|
|
# Note that this differs from IP_PROTOCOL_MAP because iptables refers to IPv6
|
|
# ICMP as 'icmp6' whereas it is 'ipv6-icmp' in IP_PROTOCOL_MAP.
|
|
IPTABLES_PROTOCOL_MAP = {PROTO_NAME_DCCP: 'dccp',
|
|
PROTO_NAME_ICMP: 'icmp',
|
|
PROTO_NAME_IPV6_ICMP: 'icmp6',
|
|
PROTO_NAME_SCTP: 'sctp',
|
|
PROTO_NAME_TCP: 'tcp',
|
|
PROTO_NAME_UDP: 'udp'}
|
|
|
|
# IP header length
|
|
IP_HEADER_LENGTH = {
|
|
4: 20,
|
|
6: 40,
|
|
}
|
|
|
|
# ICMPv6 types:
|
|
# Destination Unreachable (1)
|
|
ICMPV6_TYPE_DEST_UNREACH = 1
|
|
# Packet Too Big (2)
|
|
ICMPV6_TYPE_PKT_TOOBIG = 2
|
|
# Time Exceeded (3)
|
|
ICMPV6_TYPE_TIME_EXCEED = 3
|
|
# Parameter Problem (4)
|
|
ICMPV6_TYPE_PARAMPROB = 4
|
|
# Echo Request (128)
|
|
ICMPV6_TYPE_ECHO_REQUEST = 128
|
|
# Echo Reply (129)
|
|
ICMPV6_TYPE_ECHO_REPLY = 129
|
|
# Multicast Listener Query (130)
|
|
ICMPV6_TYPE_MLD_QUERY = 130
|
|
# Multicast Listener Report (131)
|
|
ICMPV6_TYPE_MLD_REPORT = 131
|
|
# Multicast Listener Done (132)
|
|
ICMPV6_TYPE_MLD_DONE = 132
|
|
# Router Solicitation (133)
|
|
ICMPV6_TYPE_RS = 133
|
|
# Router Advertisement (134)
|
|
ICMPV6_TYPE_RA = 134
|
|
# Neighbor Solicitation (135)
|
|
ICMPV6_TYPE_NS = 135
|
|
# Neighbor Advertisement (136)
|
|
ICMPV6_TYPE_NA = 136
|
|
# Multicast Listener v2 Report (143)
|
|
ICMPV6_TYPE_MLD2_REPORT = 143
|
|
|
|
# List of ICMPv6 types that should be allowed from the unspecified address for
|
|
# Duplicate Address Detection:
|
|
ICMPV6_ALLOWED_UNSPEC_ADDR_TYPES = [ICMPV6_TYPE_MLD_REPORT,
|
|
ICMPV6_TYPE_NS,
|
|
ICMPV6_TYPE_MLD2_REPORT]
|
|
|
|
# Human-readable ID to which the subnetpool ID should be set to
|
|
# indicate that IPv6 Prefix Delegation is enabled for a given subnetpool
|
|
IPV6_PD_POOL_ID = 'prefix_delegation'
|
|
|
|
# Device names start with "tap"
|
|
TAP_DEVICE_PREFIX = 'tap'
|
|
|
|
# Device names start with "macvtap"
|
|
MACVTAP_DEVICE_PREFIX = 'macvtap'
|
|
|
|
# Linux interface max length
|
|
DEVICE_NAME_MAX_LEN = 15
|
|
|
|
# Time format
|
|
ISO8601_TIME_FORMAT = '%Y-%m-%dT%H:%M:%S.%f'
|
|
|
|
DHCPV6_STATEFUL = 'dhcpv6-stateful'
|
|
DHCPV6_STATELESS = 'dhcpv6-stateless'
|
|
IPV6_SLAAC = 'slaac'
|
|
IPV6_MODES = [DHCPV6_STATEFUL, DHCPV6_STATELESS, IPV6_SLAAC]
|
|
|
|
ACTIVE_PENDING_STATUSES = (
|
|
ACTIVE,
|
|
PENDING_CREATE,
|
|
PENDING_UPDATE
|
|
)
|
|
|
|
# Network Type constants
|
|
TYPE_FLAT = 'flat'
|
|
TYPE_GENEVE = 'geneve'
|
|
TYPE_GRE = 'gre'
|
|
TYPE_LOCAL = 'local'
|
|
TYPE_VXLAN = 'vxlan'
|
|
TYPE_VLAN = 'vlan'
|
|
TYPE_NONE = 'none'
|
|
|
|
# List of supported network segment range types
|
|
NETWORK_SEGMENT_RANGE_TYPES = [TYPE_VLAN, TYPE_VXLAN, TYPE_GRE, TYPE_GENEVE]
|
|
|
|
# Values for network_type
|
|
|
|
# For VLAN Network
|
|
MIN_VLAN_TAG = 1
|
|
MAX_VLAN_TAG = 4094
|
|
|
|
# For Geneve Tunnel
|
|
MIN_GENEVE_VNI = 1
|
|
MAX_GENEVE_VNI = 2 ** 24 - 1
|
|
|
|
# For GRE Tunnel
|
|
MIN_GRE_ID = 1
|
|
MAX_GRE_ID = 2 ** 32 - 1
|
|
|
|
# For VXLAN Tunnel
|
|
MIN_VXLAN_VNI = 1
|
|
MAX_VXLAN_VNI = 2 ** 24 - 1
|
|
VXLAN_UDP_PORT = 4789
|
|
|
|
# Overlay (tunnel) protocol overhead
|
|
GENEVE_ENCAP_MIN_OVERHEAD = 30
|
|
GRE_ENCAP_OVERHEAD = 22
|
|
VXLAN_ENCAP_OVERHEAD = 30
|
|
|
|
# For DNS extension
|
|
DNS_DOMAIN_DEFAULT = 'openstacklocal.'
|
|
DNS_LABEL_MAX_LEN = 63
|
|
DNS_LABEL_REGEX = "^[a-z0-9-]{1,%d}$" % DNS_LABEL_MAX_LEN
|
|
|
|
# max value for TCP, UDP, SCTP ports
|
|
PORT_MAX = 2**16 - 1
|
|
|
|
VALID_DSCP_MARKS = [0, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34,
|
|
36, 38, 40, 46, 48, 56]
|
|
|
|
INGRESS_DIRECTION = 'ingress'
|
|
EGRESS_DIRECTION = 'egress'
|
|
VALID_DIRECTIONS = (INGRESS_DIRECTION, EGRESS_DIRECTION)
|
|
|
|
PROVISIONAL_IPV6_PD_PREFIX = '::/64'
|
|
|
|
# Traffic control
|
|
TC_QDISC_TYPE_HTB = 'htb'
|
|
TC_QDISC_TYPE_TBF = 'tbf'
|
|
TC_QDISC_TYPE_INGRESS = 'ingress'
|
|
TC_QDISC_TYPES = (TC_QDISC_TYPE_HTB, TC_QDISC_TYPE_TBF, TC_QDISC_TYPE_INGRESS)
|
|
|
|
TC_QDISC_INGRESS_ID = 'ffff:'
|
|
|
|
TC_QDISC_PARENTS = {'root': 0xffffffff,
|
|
'ingress': 0xfffffff1}
|
|
|
|
|
|
class Sentinel(object):
|
|
"""A constant object that does not change even when copied."""
|
|
def __deepcopy__(self, memo):
|
|
# Always return the same object because this is essentially a constant.
|
|
return self
|
|
|
|
def __copy__(self):
|
|
# called via copy.copy(x)
|
|
return self
|
|
|
|
|
|
#############################
|
|
# Attribute related constants
|
|
#############################
|
|
|
|
ATTR_NOT_SPECIFIED = Sentinel()
|
|
|
|
DICT_POPULATE_DEFAULTS = 'dict_populate_defaults'
|
|
|
|
HEX_ELEM = '[0-9A-Fa-f]'
|
|
UUID_PATTERN = '-'.join([HEX_ELEM + '{8}', HEX_ELEM + '{4}',
|
|
HEX_ELEM + '{4}', HEX_ELEM + '{4}',
|
|
HEX_ELEM + '{12}'])
|
|
|
|
SHARED = 'shared'
|
|
|
|
|
|
##########################
|
|
# Device related constants
|
|
##########################
|
|
# vhost-user device names start with "vhu"
|
|
VHOST_USER_DEVICE_PREFIX = 'vhu'
|
|
# The vswitch side of a veth pair for a nova iptables filter setup
|
|
VETH_DEVICE_PREFIX = 'qvo'
|
|
# prefix for SNAT interface in DVR
|
|
SNAT_INT_DEV_PREFIX = 'sg-'
|
|
|
|
|
|
ROUTER_PORT_OWNERS = ROUTER_INTERFACE_OWNERS_SNAT + (DEVICE_OWNER_ROUTER_GW,)
|
|
|
|
ROUTER_STATUS_ACTIVE = 'ACTIVE'
|
|
ROUTER_STATUS_ALLOCATING = 'ALLOCATING'
|
|
ROUTER_STATUS_ERROR = 'ERROR'
|
|
|
|
VALID_ROUTER_STATUS = (ROUTER_STATUS_ACTIVE,
|
|
ROUTER_STATUS_ALLOCATING,
|
|
ROUTER_STATUS_ERROR)
|
|
|
|
HA_ROUTER_STATE_KEY = '_ha_state'
|
|
METERING_LABEL_KEY = '_metering_labels'
|
|
FLOATINGIP_AGENT_INTF_KEY = '_floatingip_agent_interfaces'
|
|
SNAT_ROUTER_INTF_KEY = '_snat_router_interfaces'
|
|
|
|
HA_NETWORK_NAME = 'HA network tenant %s'
|
|
HA_SUBNET_NAME = 'HA subnet tenant %s'
|
|
HA_PORT_NAME = 'HA port tenant %s'
|
|
HA_ROUTER_STATE_ACTIVE = 'active'
|
|
HA_ROUTER_STATE_STANDBY = 'standby'
|
|
HA_ROUTER_STATE_UNKNOWN = 'unknown'
|
|
VALID_HA_STATES = (HA_ROUTER_STATE_ACTIVE, HA_ROUTER_STATE_STANDBY,
|
|
HA_ROUTER_STATE_UNKNOWN)
|
|
|
|
PAGINATION_INFINITE = 'infinite'
|
|
|
|
SORT_DIRECTION_ASC = 'asc'
|
|
SORT_DIRECTION_DESC = 'desc'
|
|
|
|
ETHERTYPE_NAME_ARP = 'arp'
|
|
ETHERTYPE_ARP = 0x0806
|
|
ETHERTYPE_IP = 0x0800
|
|
ETHERTYPE_IPV6 = 0x86DD
|
|
|
|
IP_PROTOCOL_NAME_ALIASES = {PROTO_NAME_IPV6_ICMP_LEGACY:
|
|
PROTO_NAME_IPV6_ICMP}
|
|
|
|
IP_PROTOCOL_NUM_TO_NAME_MAP = {str(v): k for k, v in IP_PROTOCOL_MAP.items()}
|
|
|
|
# When using iptables-save we specify '-p {proto}',
|
|
# but sometimes those values are not identical. This is a map
|
|
# of known protocol numbers that require a name to be used and
|
|
# protocol names that require a different name to be used,
|
|
# because that is how iptables-save will display them.
|
|
#
|
|
# This is how the list was created, so there is a possibility
|
|
# it will need to be updated in the future:
|
|
#
|
|
# $ for num in {0..255}; do iptables -A INPUT -p $num; done
|
|
# $ iptables-save
|
|
#
|
|
# These cases are special, and were found by inspection:
|
|
# - 'ipv6-encap' uses 'ipv6'
|
|
# - 'icmpv6' uses 'ipv6-icmp'
|
|
# - 'pgm' uses '113' instead of its name
|
|
# - protocol '0' uses no -p argument
|
|
IPTABLES_PROTOCOL_NAME_MAP = {PROTO_NAME_IPV6_ENCAP: 'ipv6',
|
|
PROTO_NAME_IPV6_ICMP_LEGACY:
|
|
'ipv6-icmp',
|
|
PROTO_NAME_PGM: '113',
|
|
'0': None,
|
|
'1': 'icmp',
|
|
'2': 'igmp',
|
|
'3': 'ggp',
|
|
'4': 'ipencap',
|
|
'5': 'st',
|
|
'6': 'tcp',
|
|
'8': 'egp',
|
|
'9': 'igp',
|
|
'12': 'pup',
|
|
'17': 'udp',
|
|
'20': 'hmp',
|
|
'22': 'xns-idp',
|
|
'27': 'rdp',
|
|
'29': 'iso-tp4',
|
|
'33': 'dccp',
|
|
'36': 'xtp',
|
|
'37': 'ddp',
|
|
'38': 'idpr-cmtp',
|
|
'41': 'ipv6',
|
|
'43': 'ipv6-route',
|
|
'44': 'ipv6-frag',
|
|
'45': 'idrp',
|
|
'46': 'rsvp',
|
|
'47': 'gre',
|
|
'50': 'esp',
|
|
'51': 'ah',
|
|
'57': 'skip',
|
|
'58': 'ipv6-icmp',
|
|
'59': 'ipv6-nonxt',
|
|
'60': 'ipv6-opts',
|
|
'73': 'rspf',
|
|
'81': 'vmtp',
|
|
'88': 'eigrp',
|
|
'89': 'ospf',
|
|
'93': 'ax.25',
|
|
'94': 'ipip',
|
|
'97': 'etherip',
|
|
'98': 'encap',
|
|
'103': 'pim',
|
|
'108': 'ipcomp',
|
|
'112': 'vrrp',
|
|
'115': 'l2tp',
|
|
'124': 'isis',
|
|
'132': 'sctp',
|
|
'133': 'fc',
|
|
'135': 'mobility-header',
|
|
'136': 'udplite',
|
|
'137': 'mpls-in-ip',
|
|
'138': 'manet',
|
|
'139': 'hip',
|
|
'140': 'shim6',
|
|
'141': 'wesp',
|
|
'142': 'rohc'}
|
|
|
|
# A length of a iptables chain name must be less than or equal to 11
|
|
# characters.
|
|
# <max length of iptables chain name> - (<binary_name> + '-') = 28-(16+1) = 11
|
|
MAX_IPTABLES_CHAIN_LEN_WRAP = 11
|
|
MAX_IPTABLES_CHAIN_LEN_NOWRAP = 28
|
|
|
|
# Timeout in seconds for getting an IPv6 LLA
|
|
LLA_TASK_TIMEOUT = 40
|
|
|
|
# length of all device prefixes (e.g. qvo, tap, qvb)
|
|
LINUX_DEV_PREFIX_LEN = 3
|
|
# must be shorter than linux IFNAMSIZ (which is 16)
|
|
LINUX_DEV_LEN = 14
|
|
|
|
# Possible prefixes to partial port IDs in interface names used by the OVS,
|
|
# Linux Bridge, and IVS VIF drivers in Nova and the neutron agents. See the
|
|
# 'get_ovs_interfaceid' method in Nova (nova/virt/libvirt/vif.py) for details.
|
|
INTERFACE_PREFIXES = (TAP_DEVICE_PREFIX,
|
|
VETH_DEVICE_PREFIX,
|
|
SNAT_INT_DEV_PREFIX)
|
|
|
|
ATTRIBUTES_TO_UPDATE = 'attributes_to_update'
|
|
|
|
# TODO(amuller): Re-define the RPC namespaces once Oslo messaging supports
|
|
# Targets with multiple namespaces. Neutron will then implement callbacks
|
|
# for its RPC clients in order to support rolling upgrades.
|
|
|
|
# RPC Interface for agents to call DHCP API implemented on the plugin side
|
|
RPC_NAMESPACE_DHCP_PLUGIN = None
|
|
# RPC interface for the metadata service to get info from the plugin side
|
|
RPC_NAMESPACE_METADATA = None
|
|
# RPC interface for agent to plugin security group API
|
|
RPC_NAMESPACE_SECGROUP = None
|
|
# RPC interface for agent to plugin DVR api
|
|
RPC_NAMESPACE_DVR = None
|
|
# RPC interface for reporting state back to the plugin
|
|
RPC_NAMESPACE_STATE = None
|
|
# RPC interface for agent to plugin resources API
|
|
RPC_NAMESPACE_RESOURCES = None
|
|
|
|
# Default network MTU value when not configured
|
|
DEFAULT_NETWORK_MTU = 1500
|
|
IPV6_MIN_MTU = 1280
|
|
|
|
ROUTER_MARK_MASK = "0xffff"
|
|
|
|
VALID_ETHERTYPES = (IPv4, IPv6)
|
|
|
|
IP_ALLOWED_VERSIONS = [IP_VERSION_4, IP_VERSION_6]
|
|
|
|
PORT_RANGE_MIN = 1
|
|
PORT_RANGE_MAX = 65535
|
|
|
|
DHCPV6_CLIENT_PORT = 546
|
|
|
|
# Configuration values for accept_ra sysctl, copied from linux kernel
|
|
# networking (netdev) tree, file Documentation/networking/ip-sysctl.txt
|
|
#
|
|
# Possible values are:
|
|
# 0 Do not accept Router Advertisements.
|
|
# 1 Accept Router Advertisements if forwarding is disabled.
|
|
# 2 Overrule forwarding behaviour. Accept Router Advertisements
|
|
# even if forwarding is enabled.
|
|
ACCEPT_RA_DISABLED = 0
|
|
ACCEPT_RA_WITHOUT_FORWARDING = 1
|
|
ACCEPT_RA_WITH_FORWARDING = 2
|
|
|
|
# Some components communicate using private address ranges, define
|
|
# them all here. These address ranges should not cause any issues
|
|
# even if they overlap since they are used in disjoint namespaces,
|
|
# but for now they are unique.
|
|
# We define the metadata cidr since it falls in the range.
|
|
PRIVATE_CIDR_RANGE = '169.254.0.0/16'
|
|
DVR_FIP_LL_CIDR = '169.254.64.0/18'
|
|
L3_HA_NET_CIDR = '169.254.192.0/18'
|
|
METADATA_CIDR = '169.254.169.254/32'
|
|
|
|
# The only defined IpamAllocation status at this stage is 'ALLOCATED'.
|
|
# More states will be available in the future - e.g.: RECYCLABLE
|
|
IPAM_ALLOCATION_STATUS_ALLOCATED = 'ALLOCATED'
|
|
|
|
VALID_IPAM_ALLOCATION_STATUSES = (IPAM_ALLOCATION_STATUS_ALLOCATED,)
|
|
|
|
# Port binding states for Live Migration
|
|
PORT_BINDING_STATUSES = (ACTIVE,
|
|
INACTIVE)
|
|
|
|
VALID_FLOATINGIP_STATUS = (FLOATINGIP_STATUS_ACTIVE,
|
|
FLOATINGIP_STATUS_DOWN,
|
|
FLOATINGIP_STATUS_ERROR)
|
|
|
|
# Floating IP host binding states
|
|
FLOATING_IP_HOST_UNBOUND = "FLOATING_IP_HOST_UNBOUND"
|
|
FLOATING_IP_HOST_NEEDS_BINDING = "FLOATING_IP_HOST_NEEDS_BINDING"
|
|
|
|
# Possible types of values (e.g. in QoS rule types)
|
|
VALUES_TYPE_CHOICES = "choices"
|
|
VALUES_TYPE_RANGE = "range"
|
|
|
|
# Units base
|
|
SI_BASE = 1000
|
|
IEC_BASE = 1024
|
|
|
|
# Port bindings handling
|
|
NO_ACTIVE_BINDING = 'no_active_binding'
|
|
|
|
EXT_PARENT_PREFIX = 'ext_parent'
|
|
|
|
RP_BANDWIDTHS = 'resource_provider_bandwidths'
|
|
RP_INVENTORY_DEFAULTS = 'resource_provider_inventory_defaults'
|