32 KiB

Raw Blame History

Enhancement to Neutron BGPaaS

https://bugs.launchpad.net/neutron/+bug/1921461

Enhancement to Neutron BGPaaS to directly support Neutron Routers and bgp-peering from such routers over internal & external Neutron Networks

Problem Description

There are very good foundation APIs in Neutron BGPaaS that brought in BGP service functionality (see¹) into Neutron through Neutron Dynamic Routing. (see² )

Note

In this spec, Neutron-BGPaaS, BGPaaS and neutron-dynamic-routing/bgp are used as synonymns. These refers to "Neutron Dynamic Routing using BGPaaS" function already available in Neutron. Similarly, 'ISP network' and 'Neutron External Network' are used as synonymns.

In a Telco Service Provider environment, VNFs (Virtual Network Functions³) & CNFs (Containerized-Network-Functions) are run that provides simple-to-fairly complex services to subscribers. These VNFs use many Non-Neutron IP-Addresses which need to be exposed to subscribers. The subscribers access these services through these Non-Neutron IP-Addresses, referred as 'Service-Address'. It can belong to either IPv4 (or) IPv6 address-families.

Service-Address are wholly managed inside a VNF transparent to Neutron. But these Service-Address are reachable on the dataplane by subscribers, through VNICs (or Ports) holding Neutron-managed Addresses. In short, the Neutron managed primary-addresses on VNFs VNICs act as NextHops to the Service-Address of VNF.

In order to enable L3 reachability to these Service-Addresses from an ISP-network (or) make the Service-addresses reachable from another neutron-tenant-network entity, these Service-Addresses need to be brought into a Neutron Router's Routing Table.

The number of VNFs are high and hence the number of service addresses to be exposed are higher. "BGP between the VNFs and their hosting Neutron Routers" provides a very elegant and scalable automated approach for a control-plane driven route-learning of Service-Address by the Neutron Router from the VNFs. This enables L3 reachability of such Service-Addresses from other neutron-tenant-network-VNFs that is attached to the same Neutron Router.

These service addresses also need to be advertised to the ISP-PE-Router. This will enable subscribers present on ISP-network be able to use the services exported by applications in the VNFs.

The existing Neutron Dynamic BGPaaS falls a little short of supporting the above requirements due to below reasons:

Existing BGPaaS lacks the functionality (both API and implementations) to do BGP Peering over Neutron Internal Networks. The addition of service-addresses to Neutron Router's Routing Table requires BGP control plane to bring them in via BGP peering (see⁴) towards the VNFs over Neutron Tenant Networks from Neutron Router. It also requires BGP speaker to learn routes from the BGP peers. Current implementation advertises routes to peers but doesn't learn from peers.
Existing Neutron BGPaaS supports BGP Peering only over Non-Neutron Networks. Please refer the current implementation and documentation as in⁵ . Advertisment of service-addresses to the ISP-PE-Router requires BGP Peering over Neutron External Networks. This will enable the ISP-PE-Router to learn the Service-Addresses over the BGP control plane. Thereby, enabling L3-reachability for subscribers on the ISP-side to be able to take advantage of services offered by VNFs (and CNFs).
Exising BGPaaS doesn't provide API/implementation to associate a BGP speaker to a router. It currently supports a'loose-association'of network to BGP speaker. This 'loose-association' is concept where the BGP speaker derives the routes of the Neutron Router through APIs and not due to direct connectivity of BGP Speaker to the Neutron Router. Association of BGP speaker to router enables access to all the neutron-router-interfaces ie. both internal/external interfaces. This will enable a single bgpspeaker associated with the Neutron Router, be able to peer simultaneously towards VNFs on neutron-tenant-network as well as the ISP-PE-Router on neutron-external-network.
It also doesn't support BGP peer group feature. BGP Peer Group feature enables automatic-bgp-peering towards VNFs by Neutron Router whenever the VNFs are scaled-out in a VNF cluster or whenever the VNFs are scaled in from a VNF cluster. The automatic-bgp-peering refers to the fact that the current BGP Speaker will be enhanced to automatically accept peering-requests from VNF if the VNFs are within a pre-configured ip-address-range (aka listen-range) that openstack tenant can configure for the BGP speaker.
BGPaaS capability will have varying implementations from different Neutron backends. This makes it important to have some feedback ingrained in the Neutron BGPaaS API. It will allow various Neutron backends (including reference BGPaaS backend) to drive realization status inside Openstack Infra for the BGP resources exposed by Neutron BGPaaS. To provide that, the proposal in the spec is to add a new resource type 'Association' that can work with current BGPSpeaker object. More specifically, the plan is to support router_association, peer_association as resources under a BGPSpeaker object. A router_association resource will be used to create a binding between a BGPSpeaker and a Neutron Router, that will internally realizes BGP Control Plane over that Neutron Router. Similarly, a peer_association resource will be used to create a binding between a BGPSpeaker and a BGPPeer that will internally realize BGP Peering between the BGPSpeaker and the BGPPeer resource.

Proposed Change

To enable L3 reachability to the Service-Addresses from ISP-network or from another-neutron-tenant-network entity, the below usecases are introduced :

Enable direct BGP-Peering (see [2]_) from a Neutron Router towards the VNFs (or CNFs) on its connected networks. This provides L3 reachability to the service-addresses hosted on such VNFs, as such addresses will be installed in the Neutron Router's routing-table by the BGPaaS control plane. The proposal is to provide facility to directly associate a BGP Speaker to a neutron-router, that will in turn enable the router to reach BGP-Control plane learned routes from the VNF.. A single router can be associated to a BGP speaker and the speaker will be running inside the L3 router namespace.
Enable BGP-Peering over Neutron External Networks from a Neutron Router to the ISP-PE-Router. This allows the ISP-PE-Router to learn the Service-Addresses over the BGP control plane from Neutron Router. Thereby, enabling L3-reachability for subscribers on the ISP-side to leverage services offered by VNFs (and CNFs).
Support BGP peer group feature This will allow to transparently scale bgp peering to a number of VNFs, whenever VNF clusters are scaled-out or scaled-in. It supports BGP peering to a group of remote neighbors that are configured using a range of IP addresses. This can also be used in k8s over openstack deployment where CNF scale-out/scale-in is a pure k8s operation. It would be undesirable to call neutron APIs in this case.

New resources (Network Association, Router Association, Peer Association) will be added as part of this spec. Association resources provides the below benefits

Enables provisioning of certain BGP control plane parameters specific to BGP-Speaker-to-BGP-Peer binding and also specific to BGP-Speaker-to-Router binding. For eg: some attributes (status, advertise-extra-routes etc) are useful when linked to associations rather than directly to parent resources (speaker, peer). A BGP Peer can be associated to different BGP Speakers, so having a Status field in bgp-peer won’t be beneficial. It is useful only when associated to Peer Association resource.
Enables the Neutron BGPaaS APIs to provide feedback on the realization status of BGP Control Plane towards Openstack Tenant. For eg: In this spec, a new Status field is planned to be introduced. This will allow a Neutron-BGPaaS backend driver to provide realization-status for different BGP resources inside Openstack Infra.

+-----------------------------------------------+
|                                               |
|                ISP- PE Router                 |---------|
|                                               |         |
+-----------------------------------------------+        EBGP
                        |                                 |
                        |                                 |
+-----------------------------------------------+         |
|                                               |---------|
|                Neutron Router                 |
|                                               |---------|
+-----------------------------------------------+         |
                      |                                   |
                      |                                 EBGP
+-----------------------------------------------+         |
|                 VNF Cluster                   |         |
|  +-----------------+   +-----------------+    |---------|
|  |       VM1       |   |       VM2       |    |
|  +-----------------+   +-----------------+    |
+-----------------------------------------------+

To advertise the multiple service addresses hosted by VNFs to ISP-PE routers, 2 BGP sessions are created. One BGP session created directly towards the VNFs from a Neutron Router hosting the neutron-tenant-networks of the VNF. And the next BGP-Peering towards the ISP-PE-Routers from Neutron Router directly over the Neutron External Networks.

Proposal is to enhance existing BGPaas (see⁶), allow neutron router to be associated to a BGP Speaker and allow BGP Speaker to peer with both the internal-Networks and External-Networks present on that Neutron Router. This will be implemented using enhancements to the neutron-service and neutron-dynamic-routing.

Implementation approaches

Option 1

A BGP speaker is spawned inside router namespace, when a neutron-router is associated to BGP Speaker. BGP speaker will be running inside the L3 router namespace which enables access to all the neutron-router-interfaces ie. both internal/external interfaces. BGP functionality provided by OS-Ken will be reused to excite BGP speaker functionality to run only within the neutron router namespace.

BGP Service Plugin will be enhanced to accept the request to associate a BGP speaker to the router. BGP L3 agent extension will implement the L3 agent side of BGP enhancements. It will be responsible for realizing bgpspeaker inside the router-namespace and now bgpspeaker can peer over networks on the router from inside the router-namespace. BGP speaker can listen on 0.0.0.0:179 which enables it to listen on all the neutron-router-interfaces and can peer with the neighbour based on the configuration.

+---------------+              +-----------------------------------+
|DHCP namespace |              |Router namespace                   |
|     qdhcp     |              |     qrouter                       |
|   +------+    |              |  +---+   +---+   +-----------+    |
|   | tap  |    |              |  | qr|   | qg|   |BGP Speaker|    |
|   +------+    |              |  +---+   +---+   +-----------+    |
|       |       |              |    |       |                      |
+---------------+              +-----------------------------------+
        |                           |       |
+--------------------------------------------------------------+
|       |                           |       |                  |
|     +--------+               +-------+  +-------+            |
|     |Port tap|               |Port qr|  |Port qg|            |
|     +--------+               +-------+  +-------+            |
|                      br-int                                  |
+--------------------------------------------------------------+

Option 2

In Option 1, since BGP speaker is spawned inside the router namespace, the speaker is tightly coupled with that router namespace. For a different BGP Speaker on a different router, wherein that router in turn is realized on the same network-node hosting the original router, a new instantiation of the BGP Speaker is required. This could potentially bring in scalability and performance problems with Option 1.

In Option 2, the proposal is to create and use VRF for BGP-Peering. VRF device (see⁷) can be used instead of namespace for BGP peering. VRF is a layer 3 master network device with its own associated routing table. It also provides added benefit of VRF any socket which allows a single process instance to efficiently provide service across all VRFs. So for N router associated BGP speakers, N vrfs will be created but a single BGP speaker will serve all of them.

+---------------+    +-----------------+    +-----------------+
|DHCP namespace |    |Router namespace |    |  VRF device     |     +-------+
|        qdhcp  |    |       qrouter   |    |                 |     |  BGP  |
|   +------+    |    |  +---+   +---+  |    |  +---+   +---+  |N---1|speaker|
|   | tap  |    |    |  | qr|   | qg|  |    |  | vr|   | vg|  |     +-------+
|   +------+    |    |  +---+   +---+  |    |  +---+   +---+  |
|       |       |    |    |       |    |    |    |       |    |
+-------------- +    +-----------------+    +-----------------+
|                 |       |       |              |       |
+-----------------------------------------------------------------+
|       |                 |       |              |       |        |
|     +--------+      +-------+  +-------+  +-------+  +-------+  |
|     |Port tap|      |Port qr|  |Port qg|  |Port vr|  |Port vg|  |
|     +--------+      +-------+  +-------+  +-------+  +-------+  |
|                                                                 |
|                      br-int                                     |
+-----------------------------------------------------------------+

Current L3Plugin and L3Agent will continue to provide Neutron-Router functionality. VRF will be realized by BGP-Dr-Agent and a new VRF is created when a neutron-router is associated to BGP Speaker. VRF will be used only for BGP peering and the learnt routes are installed inside router namespace.

Extra IPs has to be allocated from internal and external subnet pools for the vr, vg interfaces respectively. These IPs will be used for BGP peering and the allocation of new IPs can be considered as a short coming with this option.

Option 3

VRF device can provide most of the L3 functionalities provided by router namespace. In this option, the idea is to completely replace the namespace with VRF device. A new VRF will be created when a neutron-router is created.

Both L3-Routing as well as BGP can be realized through VRFs. Linux-VRF will provide neutron router functionality which includes dataplane L3-forwarding for east-west, north-south and NATing.

This provides the same advantages as in option 2 and eliminates its disadvantages. But the main concern with this approach is that it will make a huge deviation from the existing L3 implementation which will require a lot of effort and time. This also requires changes to upgrade mechanisms.

Note

The current plan is to implement Option 1 which is simpler and doesn't deviate much from the existing implementation. Incase the implementation option 3 is going to be used, it will be only a gradual replacement (from namespace to vrf) with proper upgrade path.

HA-Capable Neutron Router with BGPaaS

When HA-Capable neutron router is associated to a BGPSpeaker, two BGPSpeaker instances will be run, one on active router namespace and other on the standby router namespace. Whenever the failover happens from Active to Standby Namespace, the BGPSpeaker on Standby will be able to peer with BGP-Peers and become an Active-BGP-Speaker managing the Router.

The implementation planned in this spec supports only Centralized Neutron Routers (both HA and non-HA) and not Distributed Routers.

REST API & Neutron client command Impact

Use-case a)

Associate neutron router to BGP Speaker API

POST /v2.0/bgp-speakers/<bgp-speaker-id>/router_associations

{
 "router_association":
     {
      "router_id": "c930d7f6-ceb7-40a0-8b81-a425dd994ccf",
      "advertise_extra_routes": True
     }
}

router_id represents the UUID of the neutron router to which the BGP speaker has to be associated.
advertise_extra_routes decides whether neutron extra routes on the neutron router will be redistributed to bgp-peers by the bgpspeaker. Default is True and so all neutron extra routes will be redistributed to every bgp-peer that is bound to the BGP Speaker. Turning OFF advertise_extra_routes will disable advertisement of neutron router’s extra-routes by the bgpspeaker.

Note

The enhancement will support a router to be associated to only a single BGP speaker. The association of router to speaker and network to speaker will be a mutually exclusive operation.

New neutron Client Command:

openstack bgp speaker router association create
              [--advertise-extra-routes]
              [--no-advertise-extra-routes]
              <bgpspeaker>
              <router>

Disassociate neutron router from BGP Speaker API

DELETE  /v2.0/bgp-speakers/<bgp-speaker-id>/router_associations/<router
    -association-uuid>

New neutron Client Command:

openstack bgp speaker router association delete
              <bgpspeaker>
              <router>

Note

Deleting a BGP SPeaker will not be permitted, if the speaker already has multiple associations on itself like peer-associations and router-associations. Similarly, deletion of a router that is asoociated to a BGP speaker is also not allowed.

Update BGP Speaker Router Association

PUT /v2.0/bgp-speakers/<bgp-speaker-id>/router_associations/<router
    -association-uuid>

{
 "router_association":
     {
      "router_id": "c930d7f6-ceb7-40a0-8b81-a425dd994ccf",
      "advertise_extra_routes": True
     }
}

advertise_extra_routes field can be set to True or False when updating the router association.

New neutron Client Command:

openstack bgp speaker router association update
              [--advertise-extra-routes]
              [--no-advertise-extra-routes]
              <bgpspeaker>
              <router>

List Router associations for a given BGP speaker

GET /v2.0/bgp-speakers/<bgp-speaker-id>/router_associations

{
 "router_associations": [
     {
      "router_id": "c930d7f6-ceb7-40a0-8b81-a425dd994ccf",
      "advertise_extra_routes": True
      "status": 'ACTIVE'
     },
     {
      "router_id": "a330d7f6-ceb7-40a0-8b81-a425dd994bbe",
      "advertise_extra_routes": True
      "status": 'ACTIVE'
     }
 ]
}

status attribute helps to know whether Neutron-BGPaaS backend software has realized the router association successfully on the openstack infrastructure. Status field can be either DOWN or ACTIVE.

Show details for a BGP speaker Router Association

GET /v2.0/bgp-speakers/<bgp-speaker-id>/router_associations/<router
    -association-id>

{
 "router_association":
     {
      "router_id": "c930d7f6-ceb7-40a0-8b81-a425dd994ccf",
      "advertise_extra_routes": True
      "status": 'ACTIVE'
     }
}

Create BGP speaker Peer Association

POST /v2.0/bgp-speakers/<bgp-speaker-id>/peer_associations

{
 "peer_association":
     {
      "peer_id": "b930d7f6-ceb7-40a0-8b81-a425dd994ccf",
     }
}

peer_id represents the UUID of the BGP peer to which the BGP speaker has to be associated.

New neutron Client Command:

openstack bgp speaker peer association create
              <bgpspeaker>
              <peer>

Delete BGP speaker Peer Association

DELETE  /v2.0/bgp-speakers/<bgp-speaker-id>/peer_associations/<peer
    -association-uuid>

Note

Deleting a BGP speaker which has peer-associated will not be allowed.

New neutron Client Command:

openstack bgp speaker peer association delete
              <bgpspeaker>
              <peer>

List Peer associations for a given BGP speaker

GET /v2.0/bgp-speakers/<bgp-speaker-id>/peer_associations

{
 "peer_associations": [
     {
      "peer_id": "b930d7f6-ceb7-40a0-8b81-a425dd994ccf",
      "status": 'ACTIVE'
     },
     {
      "peer_id": "a640d7f6-ceb7-40a0-8b81-a425dd994dde",
      "status": 'ACTIVE'
     }
 ]
}

status attribute helps to know whether Neutron-BGPaaS backend software has realized the peer association successfully on the openstack infrastructure. Status field can be either DOWN or ACTIVE.

Show details for a BGP speaker Peer Association

GET /v2.0/bgp-speakers/<bgp-speaker-id>/peer_associations/<peer
    -association-id>

{
 "peer_association":
     {
      "peer_id": "b930d7f6-ceb7-40a0-8b81-a425dd994ccf",
      "status": 'ACTIVE'
     }
}

Show routes managed by BGP Speaker API

GET /v2.0/bgp-speakers/<bgp-speaker-id>/get_routes

{
     "routes": [
         {
              "cidr": "192.168.10.0/24",
              "nexthop": ["10.0.0.1"],
              "route-type": "local"
         },
         {
              "cidr": "192.168.11.0/24",
              "nexthop": ["10.0.0.5", "10.0.0.6"],
              "route-type": "peer"
         }
       ]
}

nexthop is a list which contains ip addresses that is going to be used to reach a certain destination cidr.
cidr represents the CIDR prefix.
route-type can be local or peer based on whether the routes are local or learnt from the peer respectively.

The routes can be obtained from the backend. For example, in case of os_ken backend, rib_get method (see⁸) can be used to obtain the routes.

New Neutron Client Command:

openstack bgp speaker list routes <bgpspeaker>

Use-case b)

Create BGP Peer Group API

POST /v2.0/bgp-peer-groups/
{
   "bgp_peer_groups":{
      "name":"bgppeergroup1",
      "project_id":"",
      "remote_asn":"4566",
      "next_hop_self" : True,
      "update_source_ip": "10.20.1.5"
      "auth_type": "md5",
      "password": "<passwd>"
    }
}

remote_asn represents the remote AS number of a BGP peer group
next_hop_self decides whether to modify the nexthop attribute to its own during BGP advertisement.
update_source_ip forces BGP to use the IP address specified while talking to a BGP neighbor.
auth_type determines the authentication algorithm. Supported algorithms are none and md5, none by default.
password represents the authentication password for the specified authentication type.

New neutron Client Commands:

openstack bgp peer group create
              [--next-hop-self]
              [--no-next-hop-self]
              [--auth-type <auth-type>]
              [--password <password>]
              [--update_source-ip <ip-address>]
              --remote-asn <asn-number>
              <bgp-peer-group-name>

Delete BGP Peer Group API

DELETE /v2.0/bgp-peer-groups/<bgp-peer-group-id>

Deletion of peer-group will succeed only if there are no BGP-Peers referring to this peer-group.

New Neutron Client Commands:

openstack bgp peer group delete <bgp-peer-group-id>

Create a bgp-peer using a pre-created peer-group API

POST /v2.0/bgp-peers/
{
   "bgp_peer":{
      "peer_group_id":"a930d7f6-ceb7-40a0-8b81-a425dd994ccf",
      "name":"bgppeer1",
      "listen_range": "10.2.1.0/24"
      "listen_limit": 10
      "auth_type": "md5",
      "password": "<passwd>"
      }
}

peer_group_id represents the UUID of the BGP peer group
listen_range defines a prefix range to be associated with the peer group.
listen_limit defines the maximum number of BGP peers that can be created automatically.

These are new fields to the existing BGP peer API and are optional parameters. A BGP-Peer-Group can be re-used by multiple BGP Peers.

Changed Neutron Client Commands ((see⁹):

openstack bgp peer create
              [--listen-range <listen-network-range>]
              [--listen-limit <number>]
              [--auth-type <auth-type>]
              [--password <password>]
              [--peer-group <peer-group-id>]
              <bgp-peer>

openstack bgp speaker add peer mybgpspeaker bgpppeer1

peer-group attribute is introduced in the already existing bgp peer neutron client command. It specifies the name/UUID of the BGP peer group that has to be used by BGP Peer.

Create BGP peers with update-source and next-hop-self parameters API

As part of the enhancement, new attributes are introduced for the BGP peer model. These are next_hop_self and update_source_ip. next_hop_self decides whether to modify the nexthop attribute to its own during BGP advertisement. And update_source_ip forces BGP to use the IP address specified while talking to a BGP neighbor.

POST /v2.0/bgp-peers/
{
   "bgp_peer":{
      "auth_type":"none",
      "remote_as":"1001",
      "name":"bgppeer1",
      "peer_ip":"10.0.0.3",
      "next_hop_self":True,
      "update_source_ip": "10.2.0.15"
   }
}

Changed Neutron Client Commands:

openstack bgp peer create
              [--peer-ip <peer-ip>]
              [--next-hop-self True]
              [--auth-type <auth-type>]
              [--update-source-ip <ip>]
              --remote-as <as>
              <bgppeer>

update-source-ip and next-hop-self are introduced in the existing bgp peer neutron client command.

Backend for reference implementation

os-ken can be used to handle BGP (see¹⁰ ). os-ken is able to start bgp speaker using BGPSpeaker class and it is possible to receive event notifications (BGP_BEST_PATH_CHANGED) which can be then used to populate routes inside the namespace.

Data Model Impact

bgp_peers table will be updated to incorporate the new fields.

Field	Type	Description
update_source_ip next_hop_self	String Boolean	Forces BGP to use the IP address specified while talking to a BGP neighbor Setting to True enables all published routes to carry BGPSpeaker IP address over the BGP Control Plane towards this BGP Peer.

Field

Type

Description

update_source_ip

next_hop_self

String

Boolean

Forces BGP to use the IP address specified while talking to a BGP neighbor Setting to True enables all published routes to carry BGPSpeaker IP address over the BGP Control Plane towards this BGP Peer.

New table bgp_speaker_router_bindings will be created to manage the speaker to router association.

Field	Type	Description
id bgp_speaker_id router_id advertise_extra_routes status	uuid-str uuid-str uuid-str Boolean String	UUID of the BGP speaker router association UUID of the BGP speaker UUID of the router to which the BGP speaker has to be associated Decides whether neutron extra routes on the neutron router will be advertised to bgp-peers Shows whether Neutron-BGPaaS backend software has realized the router association successfully on the openstack infrastructure. Status field can be either DOWN or ACTIVE.

Field

Type

Description

bgp_speaker_id router_id

advertise_extra_routes

status

uuid-str

uuid-str uuid-str

Boolean

String

UUID of the BGP speaker router association UUID of the BGP speaker UUID of the router to which the BGP speaker has to be associated Decides whether neutron extra routes on the neutron router will be advertised to bgp-peers Shows whether Neutron-BGPaaS backend software has realized the router association successfully on the openstack infrastructure. Status field can be either DOWN or ACTIVE.

Similarly, id and status field will be introduced in the existing bgp_speaker_peer_bindings tables.

New table bgp_peer_group will be created to manage bgp peer group.

Field	Type	Description
id name project_id remote_asn update_source_ip next_hop_self	uuid-str String String Integer String Boolean	UUID of the BGP peer group Human readable name of the BGP peer group Owner of the BGP peer group Remote AS number of a BGP peer group Forces BGP to use the IP address specified while talking to a BGP neighbor decides whether to modify the nexthop attribute to its own during BGP advertisement

Field

Type

Description

id name project_id remote_asn update_source_ip

next_hop_self

uuid-str String String Integer String

Boolean

UUID of the BGP peer group Human readable name of the BGP peer group Owner of the BGP peer group Remote AS number of a BGP peer group Forces BGP to use the IP address specified while talking to a BGP neighbor decides whether to modify the nexthop attribute to its own during BGP advertisement

Security Impact

There can be security impacts with the introuduction of peer groups which support automatic peering requests from peers within a pre-configured listen-range. This is of major concern if we support this option for external networks.

And this problem can be resolved using authentication which will be supported in peer-groups.

Performance Impact

There can be performance impact based on the selection of the implementation approaches.

Accurate testing is however needed to understand the overhead.

Implementation

Assignee(s)

Primary assignee:

Manu B <manubk2020@gmail.com> (IRC: manubk)

Work Items

REST API update.
BGP plugin, L3 agent extension to handle BGP:
- Associate router to bgp speaker
- Disassociate router from bgp speaker.
- HA support for BGP speaker
- Support new peer group APIs
- New attributes for BGP peer APIs
CLI update.
Documentation.
Tests and CI related changes.

Testing

Unit Test
Functional test
API test Perhaps this is something that can be easily tested end-to-end with fullstack tests. Need more investigation.

Documentation Impact

User Documentation

New API and changes to legacy APIs like neutron-router and neutron-bgpaas must be documented.

32 KiB Raw Blame History Unescape Escape

Enhancement to Neutron BGPaaS

Problem Description

Proposed Change

Implementation approaches

Option 1

Option 2

Option 3

HA-Capable Neutron Router with BGPaaS

REST API & Neutron client command Impact

Associate neutron router to BGP Speaker API

Disassociate neutron router from BGP Speaker API

Update BGP Speaker Router Association

List Router associations for a given BGP speaker

Show details for a BGP speaker Router Association

Create BGP speaker Peer Association

Delete BGP speaker Peer Association

List Peer associations for a given BGP speaker

Show details for a BGP speaker Peer Association

Show routes managed by BGP Speaker API

Create BGP Peer Group API

Delete BGP Peer Group API

Create a bgp-peer using a pre-created peer-group API

Create BGP peers with update-source and next-hop-self parameters API

Backend for reference implementation

Data Model Impact

Security Impact

Performance Impact

Implementation

Assignee(s)

Work Items

Testing

Documentation Impact

User Documentation

References

32 KiB

Raw Blame History