# Licensed under the Apache License, Version 2.0 (the "License"); you may # not use this file except in compliance with the License. You may obtain # a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the # License for the specific language governing permissions and limitations # under the License. from oslo_config import cfg from tempest import config CONF = config.CONF NeutronPluginOptions = [ cfg.ListOpt('provider_vlans', default=[], help='List of provider networks available in the deployment.'), cfg.IntOpt('provider_net_base_segm_id', default=3000, help='Base segmentation ID to create provider networks. ' 'This value will be increased in case of conflict.'), cfg.BoolOpt('specify_floating_ip_address_available', default=True, help='Allow passing an IP Address of the floating ip when ' 'creating the floating ip'), cfg.ListOpt('available_type_drivers', default=[], help='List of network types available to neutron, ' 'e.g. vxlan,vlan,gre.'), cfg.StrOpt('agent_availability_zone', help='The availability zone for all agents in the deployment. ' 'Configure this only when the single value is used by ' 'all agents in the deployment.'), cfg.IntOpt('max_networks_per_project', default=4, help='Max number of networks per project. ' 'Configure this only when project is limited with real ' 'vlans in deployment.'), cfg.StrOpt('l3_agent_mode', help='The agent mode for L3 agents in the deployment. ' 'Configure this only when the single value is used by ' 'all agents in the deployment.'), cfg.StrOpt('test_mtu_networks', default='[{"provider:network_type":"vxlan",' '"mtu":1200, "cidr":"10.100.0.0/16"}' ',' '{"provider:network_type":"vxlan",' '"mtu":1300, "cidr":"10.200.0.0/16"}]', help='Configuration for test networks. The format is JSON. ' '"provider:network_type": - string ' '"mtu": - integer ' '"cidr" - string ' '"provider:segmentation_id": - integer'), cfg.IntOpt('max_mtu', default=1500, help='Max mtu value of default deployments".'), cfg.StrOpt('global_ip_address', default='', help='An IP address in the Internet that can be used in ' 'a connectivity test'), cfg.StrOpt('q_agent', default=None, choices=['None', 'linuxbridge', 'ovs', 'sriov'], help='Agent used for devstack@q-agt.service'), cfg.StrOpt('firewall_driver', default=None, choices=['None', 'openvswitch', 'ovn', 'iptables_hybrid', 'iptables'], help='Driver for security groups firewall in the L2 agent'), # Multicast tests settings cfg.StrOpt('multicast_group_range', default='225.0.0.120-225.0.0.250', help='Unallocated multi-cast IPv4 range, which will be used to ' 'test the multi-cast support.'), # Option for feature to connect via SSH to VMs using an intermediate SSH # server cfg.StrOpt('ssh_proxy_jump_host', default=None, help='Proxy jump host used to connect via SSH to VMs..'), cfg.StrOpt('ssh_proxy_jump_username', default='root', help='User name used to connect to "ssh_proxy_jump_host".'), cfg.StrOpt('ssh_proxy_jump_password', default=None, help='Password used to connect to "ssh_proxy_jump_host".'), cfg.StrOpt('ssh_proxy_jump_keyfile', default=None, help='Keyfile used to connect to "ssh_proxy_jump_host".'), cfg.IntOpt('ssh_proxy_jump_port', default=22, help='Port used to connect to "ssh_proxy_jump_host".'), cfg.IntOpt('reboots_in_test', default=1, help='Number of reboots to apply if tests requires reboots'), # Options for special, "advanced" image like e.g. Ubuntu. Such image can be # used in tests which require some more advanced tool than available in # Cirros cfg.BoolOpt('default_image_is_advanced', default=False, help='Default image is an image which supports features ' 'that Cirros does not, like Ubuntu or CentOS supporting ' 'advanced features. ' 'If this is set to True, "advanced_image_ref" option ' 'is not required to be set.'), cfg.StrOpt('advanced_image_ref', default=None, help='Valid advanced image uuid to be used in tests. ' 'It is an image that supports features that Cirros ' 'does not, like Ubuntu or CentOS supporting advanced ' 'features.'), cfg.StrOpt('advanced_image_flavor_ref', default=None, help='Valid flavor to use with advanced image in tests. ' 'This is required if advanced image has to be used in ' 'tests.'), cfg.StrOpt('advanced_image_ssh_user', default=None, help='Name of ssh user to use with advanced image in tests. ' 'This is required if advanced image has to be used in ' 'tests.'), # Option for creating QoS policies configures as "shared". # The default is false in order to prevent undesired usage # while testing in parallel. cfg.BoolOpt('create_shared_resources', default=False, help='Allow creation of shared resources.' 'The default value is false.'), cfg.BoolOpt('is_igmp_snooping_enabled', default=False, help='Indicates whether IGMP snooping is enabled or not. ' 'If True, multicast test(s) will assert that multicast ' 'traffic is not being flooded to all ports. Defaults ' 'to False.'), # Option for scheduling BGP speakers to agents explicitly # The default is false with automatic scheduling on creation # happening with the default scheduler cfg.BoolOpt('bgp_schedule_speakers_to_agents', default=False, help='Schedule BGP speakers to agents explicitly.'), ] # TODO(amuller): Redo configuration options registration as part of the planned # transition to the Tempest plugin architecture for opt in NeutronPluginOptions: CONF.register_opt(opt, 'neutron_plugin_options') # TODO(slaweq): This config option is added to avoid running bgpvpn tests twice # on stable branches till stable/stein. We need to remove this config option # once stable/stein is EOL. Bgpvpn tempest plugin has been merged into # neutron-tempest-plugin from Train. Train onwards bgpvpn tests will run from # neutron-tempest-plugins. BgpvpnGroup = [ cfg.BoolOpt('run_bgpvpn_tests', default=True, help=("If it is set to False bgpvpn api and scenario tests " "will be skipped")), cfg.IntOpt('min_asn', default=100, help=("Minimum number for the range of " "autonomous system number for distinguishers.")), cfg.IntOpt('min_nn', default=100, help=("Minimum number for the range of " "assigned number for distinguishers.")), cfg.IntOpt('max_asn', default=200, help=("Maximum number for the range of " "autonomous system number for distinguishers.")), cfg.IntOpt('max_nn', default=200, help=("Maximum number for the range of " "assigned number for distinguishers.")), ] bgpvpn_group = cfg.OptGroup(name="bgpvpn", title=("Networking-Bgpvpn Service " "Options")) CONF.register_group(bgpvpn_group) CONF.register_opts(BgpvpnGroup, group="bgpvpn") # TODO(slaweq): This config option is added to avoid running fwaas tests twice # on stable branches till stable/stein. We need to remove this config option # once stable/stein is EOL. Fwaas tempest plugin has been merged into # neutron-tempest-plugin from Train. Train onwards fwaas tests will run from # neutron-tempest-plugins. FwaasGroup = [ cfg.BoolOpt('run_fwaas_tests', default=True, help=("If it is set to False fwaas api and scenario tests " "will be skipped")), ] fwaas_group = cfg.OptGroup( name="fwaas", title=("Neutron-fwaas Service Options")) CONF.register_group(fwaas_group) CONF.register_opts(FwaasGroup, group="fwaas") # TODO(slaweq): This config option is added to avoid running SFC tests twice # on stable branches till stable/stein. We need to remove this config option # once stable/stein is EOL. SFC tempest plugin has been merged into # neutron-tempest-plugin from Train. Train onwards SFC tests will run from # neutron-tempest-plugins. SfcGroup = [ cfg.BoolOpt('run_sfc_tests', default=True, help=("If it is set to False SFC api and scenario tests " "will be skipped")), ] sfc_group = cfg.OptGroup(name="sfc", title=("Networking-sfc Service Options")) CONF.register_group(sfc_group) CONF.register_opts(SfcGroup, group="sfc") TaasGroup = [ cfg.StrOpt('provider_physical_network', default='', help='Physical network to be used for creating SRIOV network.'), cfg.StrOpt('provider_segmentation_id', default='', help='Segmentation-id to be used for creating SRIOV network.'), cfg.StrOpt('vlan_filter', default='', help='Comma separated list of VLANs to be mirrored ' 'for a Tap-Flow.'), ] taas_group = cfg.OptGroup(name='taas', title='TaaS Tempest Options') CONF.register_group(taas_group) CONF.register_opts(TaasGroup, group="taas") config_opts_translator = { 'project_network_cidr': 'tenant_network_cidr', 'project_network_v6_cidr': 'tenant_network_v6_cidr', 'project_network_mask_bits': 'tenant_network_mask_bits', 'project_network_v6_mask_bits': 'tenant_network_v6_mask_bits'} def safe_get_config_value(group, name): """Safely get Oslo config opts from Tempest, using old and new names.""" conf_group = getattr(CONF, group) try: return getattr(conf_group, name) except cfg.NoSuchOptError: return getattr(conf_group, config_opts_translator[name])