openstack/neutron-tempest-plugin
Code Issues Proposed changes
5e33282fc2
neutron-tempest-plugin/neutron_tempest_plugin/config.py
Takashi Kajinami 938f2c7fc8 Remove transition logic for old tempest option renaming 
This logic was required to adopt to the renaming in tempest[1] which
was done in 12.0.0 release. Now the minimum tempest version required
is much higher so we no longer need this compatibility consideration.

[1] ed6e586b9f8f0ada10af7711f297afa01b2b7754

Change-Id: I5d13f9146b00b2fcd5c2e96071ab914b8a56a089
2024-11-23 02:34:24 +09:00

262 lines
12 KiB
Python
Raw Blame History

# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
from oslo_config import cfg
from tempest import config
CONF = config.CONF
NeutronPluginOptions = [
cfg.ListOpt('provider_vlans',
default=[],
help='List of provider networks available in the deployment.'),
cfg.IntOpt('provider_net_base_segm_id',
default=3000,
help='Base segmentation ID to create provider networks. '
'This value will be increased in case of conflict.'),
cfg.BoolOpt('specify_floating_ip_address_available',
default=True,
help='Allow passing an IP Address of the floating ip when '
'creating the floating ip'),
cfg.ListOpt('available_type_drivers',
default=[],
help='List of network types available to neutron, '
'e.g. vxlan,vlan,gre.'),
cfg.StrOpt('agent_availability_zone',
help='The availability zone for all agents in the deployment. '
'Configure this only when the single value is used by '
'all agents in the deployment.'),
cfg.IntOpt('max_networks_per_project',
default=4,
help='Max number of networks per project. '
'Configure this only when project is limited with real '
'vlans in deployment.'),
cfg.StrOpt('l3_agent_mode',
help='The agent mode for L3 agents in the deployment. '
'Configure this only when the single value is used by '
'all agents in the deployment.'),
cfg.StrOpt('test_mtu_networks',
default='[{"provider:network_type":"vxlan",'
'"mtu":1200, "cidr":"10.100.0.0/16"}'
','
'{"provider:network_type":"vxlan",'
'"mtu":1300, "cidr":"10.200.0.0/16"}]',
help='Configuration for test networks. The format is JSON. '
'"provider:network_type":<TYPE> - string '
'"mtu":<MTU> - integer '
'"cidr"<SUBNET/MASK> - string '
'"provider:segmentation_id":<VLAN_ID> - integer'),
cfg.IntOpt('max_mtu',
default=1500,
help='Max mtu value of default deployments".'),
cfg.StrOpt('global_ip_address',
default='',
help='An IP address in the Internet that can be used in '
'a connectivity test'),
cfg.StrOpt('q_agent',
default=None,
choices=['None', 'linuxbridge', 'ovs', 'sriov'],
help='Agent used for devstack@q-agt.service'),
cfg.StrOpt('firewall_driver',
default=None,
choices=['None', 'openvswitch', 'ovn',
'iptables_hybrid', 'iptables'],
help='Driver for security groups firewall in the L2 agent'),
cfg.StrOpt('dns_domain',
default='openstackgate.local',
help='dns_domain value configured at neutron.conf, which will '
'be used for the DNS configuration of the instances'),
cfg.BoolOpt('snat_rules_apply_to_nested_networks',
default=False,
help='Whether SNAT rules apply recursively to all connected '
'networks. This is the default behavior for ovs and '
'linuxbridge drivers. OVN requires '
'ovn_router_indirect_snat=True setting to implement it.'),
# Multicast tests settings
cfg.StrOpt('multicast_group_range',
default='225.0.0.120-225.0.0.250',
help='Unallocated multi-cast IPv4 range, which will be used to '
'test the multi-cast support.'),
# Option for feature to connect via SSH to VMs using an intermediate SSH
# server
cfg.StrOpt('ssh_proxy_jump_host',
default=None,
help='Proxy jump host used to connect via SSH to VMs..'),
cfg.StrOpt('ssh_proxy_jump_username',
default='root',
help='User name used to connect to "ssh_proxy_jump_host".'),
cfg.StrOpt('ssh_proxy_jump_password',
default=None,
help='Password used to connect to "ssh_proxy_jump_host".'),
cfg.StrOpt('ssh_proxy_jump_keyfile',
default=None,
help='Keyfile used to connect to "ssh_proxy_jump_host".'),
cfg.IntOpt('ssh_proxy_jump_port',
default=22,
help='Port used to connect to "ssh_proxy_jump_host".'),
cfg.IntOpt('reboots_in_test',
default=1,
help='Number of reboots to apply if tests requires reboots'),
# Options for special, "advanced" image like e.g. Ubuntu. Such image can be
# used in tests which require some more advanced tool than available in
# Cirros
cfg.BoolOpt('default_image_is_advanced',
default=False,
help='Default image is an image which supports features '
'that Cirros does not, like Ubuntu or CentOS supporting '
'advanced features. '
'If this is set to True, "advanced_image_ref" option '
'is not required to be set.'),
cfg.StrOpt('advanced_image_ref',
default=None,
help='Valid advanced image uuid to be used in tests. '
'It is an image that supports features that Cirros '
'does not, like Ubuntu or CentOS supporting advanced '
'features.'),
cfg.StrOpt('advanced_image_flavor_ref',
default=None,
help='Valid flavor to use with advanced image in tests. '
'This is required if advanced image has to be used in '
'tests.'),
cfg.StrOpt('advanced_image_ssh_user',
default=None,
help='Name of ssh user to use with advanced image in tests. '
'This is required if advanced image has to be used in '
'tests.'),
# Option for creating QoS policies configures as "shared".
# The default is false in order to prevent undesired usage
# while testing in parallel.
cfg.BoolOpt('create_shared_resources',
default=False,
help='Allow creation of shared resources.'
'The default value is false.'),
cfg.BoolOpt('is_igmp_snooping_enabled',
default=False,
help='Indicates whether IGMP snooping is enabled or not. '
'If True, multicast test(s) will assert that multicast '
'traffic is not being flooded to all ports. Defaults '
'to False.'),
# Option for scheduling BGP speakers to agents explicitly
# The default is false with automatic scheduling on creation
# happening with the default scheduler
cfg.BoolOpt('bgp_schedule_speakers_to_agents',
default=False,
help='Schedule BGP speakers to agents explicitly.'),
]
# TODO(amuller): Redo configuration options registration as part of the planned
# transition to the Tempest plugin architecture
for opt in NeutronPluginOptions:
CONF.register_opt(opt, 'neutron_plugin_options')
# TODO(slaweq): This config option is added to avoid running bgpvpn tests twice
# on stable branches till stable/stein. We need to remove this config option
# once stable/stein is EOL. Bgpvpn tempest plugin has been merged into
# neutron-tempest-plugin from Train. Train onwards bgpvpn tests will run from
# neutron-tempest-plugins.
BgpvpnGroup = [
cfg.BoolOpt('run_bgpvpn_tests',
default=True,
help=("If it is set to False bgpvpn api and scenario tests "
"will be skipped")),
cfg.IntOpt('min_asn',
default=100,
help=("Minimum number for the range of "
"autonomous system number for distinguishers.")),
cfg.IntOpt('min_nn',
default=100,
help=("Minimum number for the range of "
"assigned number for distinguishers.")),
cfg.IntOpt('max_asn',
default=200,
help=("Maximum number for the range of "
"autonomous system number for distinguishers.")),
cfg.IntOpt('max_nn',
default=200,
help=("Maximum number for the range of "
"assigned number for distinguishers.")),
]
bgpvpn_group = cfg.OptGroup(name="bgpvpn", title=("Networking-Bgpvpn Service "
"Options"))
CONF.register_group(bgpvpn_group)
CONF.register_opts(BgpvpnGroup, group="bgpvpn")
# TODO(slaweq): This config option is added to avoid running fwaas tests twice
# on stable branches till stable/stein. We need to remove this config option
# once stable/stein is EOL. Fwaas tempest plugin has been merged into
# neutron-tempest-plugin from Train. Train onwards fwaas tests will run from
# neutron-tempest-plugins.
FwaasGroup = [
cfg.BoolOpt('run_fwaas_tests',
default=True,
help=("If it is set to False fwaas api and scenario tests "
"will be skipped")),
]
fwaas_group = cfg.OptGroup(
name="fwaas", title=("Neutron-fwaas Service Options"))
CONF.register_group(fwaas_group)
CONF.register_opts(FwaasGroup, group="fwaas")
# TODO(slaweq): This config option is added to avoid running SFC tests twice
# on stable branches till stable/stein. We need to remove this config option
# once stable/stein is EOL. SFC tempest plugin has been merged into
# neutron-tempest-plugin from Train. Train onwards SFC tests will run from
# neutron-tempest-plugins.
SfcGroup = [
cfg.BoolOpt('run_sfc_tests',
default=True,
help=("If it is set to False SFC api and scenario tests "
"will be skipped")),
]
sfc_group = cfg.OptGroup(name="sfc", title=("Networking-sfc Service Options"))
CONF.register_group(sfc_group)
CONF.register_opts(SfcGroup, group="sfc")
TaasGroup = [
cfg.StrOpt('provider_physical_network',
default='',
help='Physical network to be used for creating SRIOV network.'),
cfg.StrOpt('provider_segmentation_id',
default='',
help='Segmentation-id to be used for creating SRIOV network.'),
cfg.StrOpt('vlan_filter',
default='',
help='Comma separated list of VLANs to be mirrored '
'for a Tap-Flow.'),
]
taas_group = cfg.OptGroup(name='taas',
title='TaaS Tempest Options')
CONF.register_group(taas_group)
CONF.register_opts(TaasGroup, group="taas")
# DNS Integration with an External Service
DnsFeatureGroup = [
cfg.IntOpt(
'segmentation_id', default=12345,
help="For network types VLAN, GRE, VXLAN or GENEVE, the segmentation"
" ID must be outside the ranges assigned to project networks."),
]
dns_feature_group = cfg.OptGroup(
name='designate_feature_enabled', title='Enabled Designate Features')
CONF.register_group(dns_feature_group)
CONF.register_opts(DnsFeatureGroup, group="designate_feature_enabled")
View Git Blame Copy Permalink