diff --git a/neutron/plugins/ml2/drivers/openvswitch/agent/common/constants.py b/neutron/plugins/ml2/drivers/openvswitch/agent/common/constants.py deleted file mode 100644 index 2004826180c..00000000000 --- a/neutron/plugins/ml2/drivers/openvswitch/agent/common/constants.py +++ /dev/null @@ -1,230 +0,0 @@ -# Copyright (c) 2012 OpenStack Foundation. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or -# implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -from neutron_lib import constants as p_const - - -# Special vlan_tci value indicating flat network -FLAT_VLAN_TCI = '0x0000/0x1fff' - -# Topic for tunnel notifications between the plugin and agent -TUNNEL = 'tunnel' - -# Name prefixes for veth device or patch port pair linking the integration -# bridge with the physical bridge for a physical network -PEER_INTEGRATION_PREFIX = 'int-' -PEER_PHYSICAL_PREFIX = 'phy-' - -# Nonexistent peer used to create patch ports without associating them, it -# allows to define flows before association -NONEXISTENT_PEER = 'nonexistent-peer' - -# The different types of tunnels -TUNNEL_NETWORK_TYPES = [p_const.TYPE_GRE, p_const.TYPE_VXLAN, - p_const.TYPE_GENEVE] - -# --- OpenFlow table IDs - -# --- Integration bridge (int_br) - -LOCAL_SWITCHING = 0 - -# The physical network types of support DVR router -DVR_PHYSICAL_NETWORK_TYPES = [p_const.TYPE_VLAN, p_const.TYPE_FLAT] - -# Various tables for DVR use of integration bridge flows -DVR_TO_SRC_MAC = 1 -DVR_TO_SRC_MAC_PHYSICAL = 2 -ARP_DVR_MAC_TO_DST_MAC = 3 -ARP_DVR_MAC_TO_DST_MAC_PHYSICAL = 4 -CANARY_TABLE = 23 - -# Table for ARP poison/spoofing prevention rules -ARP_SPOOF_TABLE = 24 - -# Table for MAC spoof filtering -MAC_SPOOF_TABLE = 25 - -LOCAL_EGRESS_TABLE = 30 -LOCAL_IP_TABLE = 31 - -# packet rate limit table -PACKET_RATE_LIMIT = 59 -# Table to decide whether further filtering is needed -TRANSIENT_TABLE = 60 -LOCAL_MAC_DIRECT = 61 -TRANSIENT_EGRESS_TABLE = 62 - -# Table for DHCP -DHCP_IPV4_TABLE = 77 -DHCP_IPV6_TABLE = 78 - -# Tables used for ovs firewall -BASE_EGRESS_TABLE = 71 -RULES_EGRESS_TABLE = 72 -ACCEPT_OR_INGRESS_TABLE = 73 -BASE_INGRESS_TABLE = 81 -RULES_INGRESS_TABLE = 82 - -OVS_FIREWALL_TABLES = ( - BASE_EGRESS_TABLE, - RULES_EGRESS_TABLE, - ACCEPT_OR_INGRESS_TABLE, - BASE_INGRESS_TABLE, - RULES_INGRESS_TABLE, -) - -# Tables for parties interacting with ovs firewall -ACCEPTED_EGRESS_TRAFFIC_TABLE = 91 -ACCEPTED_INGRESS_TRAFFIC_TABLE = 92 -DROPPED_TRAFFIC_TABLE = 93 -ACCEPTED_EGRESS_TRAFFIC_NORMAL_TABLE = 94 - -INT_BR_ALL_TABLES = ( - LOCAL_SWITCHING, - DVR_TO_SRC_MAC, - DVR_TO_SRC_MAC_PHYSICAL, - CANARY_TABLE, - ARP_SPOOF_TABLE, - MAC_SPOOF_TABLE, - LOCAL_MAC_DIRECT, - LOCAL_EGRESS_TABLE, - LOCAL_IP_TABLE, - PACKET_RATE_LIMIT, - TRANSIENT_TABLE, - TRANSIENT_EGRESS_TABLE, - BASE_EGRESS_TABLE, - RULES_EGRESS_TABLE, - ACCEPT_OR_INGRESS_TABLE, - DHCP_IPV4_TABLE, - DHCP_IPV6_TABLE, - BASE_INGRESS_TABLE, - RULES_INGRESS_TABLE, - ACCEPTED_EGRESS_TRAFFIC_TABLE, - ACCEPTED_INGRESS_TRAFFIC_TABLE, - DROPPED_TRAFFIC_TABLE) - -# --- Tunnel bridge (tun_br) - -# Various tables for tunneling flows -DVR_PROCESS = 1 -PATCH_LV_TO_TUN = 2 -GRE_TUN_TO_LV = 3 -VXLAN_TUN_TO_LV = 4 -GENEVE_TUN_TO_LV = 6 - -DVR_NOT_LEARN = 9 -LEARN_FROM_TUN = 10 -UCAST_TO_TUN = 20 -ARP_RESPONDER = 21 -FLOOD_TO_TUN = 22 -# NOTE(vsaienko): transit table used by networking-bagpipe driver to -# mirror traffic to EVPN and standard tunnels to gateway nodes -BAGPIPE_FLOOD_TO_TUN_BROADCAST = 222 - -TUN_BR_ALL_TABLES = ( - LOCAL_SWITCHING, - DVR_PROCESS, - PATCH_LV_TO_TUN, - GRE_TUN_TO_LV, - VXLAN_TUN_TO_LV, - GENEVE_TUN_TO_LV, - DVR_NOT_LEARN, - LEARN_FROM_TUN, - UCAST_TO_TUN, - ARP_RESPONDER, - FLOOD_TO_TUN) - -# --- Physical Bridges (phys_brs) - -# Various tables for DVR use of physical bridge flows -DVR_PROCESS_PHYSICAL = 1 -LOCAL_VLAN_TRANSLATION = 2 -DVR_NOT_LEARN_PHYSICAL = 3 - -PHY_BR_ALL_TABLES = ( - LOCAL_SWITCHING, - DVR_PROCESS_PHYSICAL, - LOCAL_VLAN_TRANSLATION, - DVR_NOT_LEARN_PHYSICAL) - -# --- end of OpenFlow table IDs - -# type for ARP reply in ARP header -ARP_REPLY = '0x2' - -# Map tunnel types to tables number -TUN_TABLE = {p_const.TYPE_GRE: GRE_TUN_TO_LV, - p_const.TYPE_VXLAN: VXLAN_TUN_TO_LV, - p_const.TYPE_GENEVE: GENEVE_TUN_TO_LV} - - -# The default respawn interval for the ovsdb monitor -DEFAULT_OVSDBMON_RESPAWN = 30 - -# Represent invalid OF Port -OFPORT_INVALID = -1 - -ARP_RESPONDER_ACTIONS = ('move:NXM_OF_ETH_SRC[]->NXM_OF_ETH_DST[],' - 'mod_dl_src:%(mac)s,' - 'load:0x2->NXM_OF_ARP_OP[],' - 'move:NXM_NX_ARP_SHA[]->NXM_NX_ARP_THA[],' - 'move:NXM_OF_ARP_SPA[]->NXM_OF_ARP_TPA[],' - 'load:%(mac)#x->NXM_NX_ARP_SHA[],' - 'load:%(ip)#x->NXM_OF_ARP_SPA[],' - 'in_port') - -# Represent ovs status -OVS_RESTARTED = 0 -OVS_NORMAL = 1 -OVS_DEAD = 2 - -EXTENSION_DRIVER_TYPE = 'ovs' - -# ovs datapath types -OVS_DATAPATH_SYSTEM = 'system' -OVS_DATAPATH_NETDEV = 'netdev' -OVS_DPDK_VHOST_USER = 'dpdkvhostuser' -OVS_DPDK_VHOST_USER_CLIENT = 'dpdkvhostuserclient' - -OVS_DPDK_PORT_TYPES = [OVS_DPDK_VHOST_USER, OVS_DPDK_VHOST_USER_CLIENT] - -# default ovs vhost-user socket location -VHOST_USER_SOCKET_DIR = '/var/run/openvswitch' - -MAX_DEVICE_RETRIES = 5 - -# OpenFlow version constants -OPENFLOW10 = "OpenFlow10" -OPENFLOW11 = "OpenFlow11" -OPENFLOW12 = "OpenFlow12" -OPENFLOW13 = "OpenFlow13" -OPENFLOW14 = "OpenFlow14" -OPENFLOW15 = "OpenFlow15" - -OPENFLOW_MAX_PRIORITY = 65535 - -# A placeholder for dead vlans. -DEAD_VLAN_TAG = p_const.MAX_VLAN_TAG + 1 - -# callback resource for setting 'bridge_name' in the 'binding:vif_details' -OVS_BRIDGE_NAME = 'ovs_bridge_name' - -# callback resource for notifying to ovsdb handler -OVSDB_RESOURCE = 'ovsdb' - -# Used in ovs port 'external_ids' in order mark it for no cleanup when -# ovs_cleanup script is used. -SKIP_CLEANUP = 'skip_cleanup'