The native OVS/ofctl controllers talk to the bridges using a
datapath-id, instead of the bridge name. The datapath ID is
auto-generated based on the MAC address of the bridge's NIC.
In the case where bridges are on VLAN interfaces, they would
have the same MACs, therefore the same datapath-id, causing
flows for one physical bridge to be programmed on each other.
The datapath-id is a 64-bit field, with lower 48 bits being
the MAC. We set the upper 12 unused bits to identify each
unique physical bridge
This could also be fixed manually using ovs-vsctl set, but
it might be beneficial to automate this in the code.
ovs-vsctl set bridge <mybr> other-config:datapath-id=<datapathid>
You can change this yourself using above command.
You can view/verify current datapath-id via
ovs-vsctl get Bridge br-vlan datapath-id
"00006ea5a4b38a4a"
(please note that other-config is needed in the set, but not get)
Closes-Bug: #1697243
Co-Authored-By: Rodolfo Alonso Hernandez <ralonsoh@redhat.com>
Change-Id: I575ddf0a66e2cfe745af3874728809cf54e37745
(cherry picked from commit 379a9faf62)
(cherry picked from commit c02b1148db)
c7031e2cd3