openstack/neutron
Code Issues Proposed changes
Files
2aee961ab6942ab59aeacdc93d918c8c19023041
neutron/neutron/agent/linux/ip_lib.py
Bence Romsics 2aee961ab6 Suppress IPv6 metadata DAD failure and delete address 
IPv4 DAD is non-existent in Linux or its failure is silent, so we
never needed to catch and ignore it. On the other hand IPv6 DAD
failure is explicit, hence comes this change.

This of course leaves the metadata service dead on hosts where
duplicate address detection failed. But if we catch the
DADFailed exception and delete the address, at least other
functions of the dhcp-agent should not be affected.

With this the IPv6 isolated metadata service is not redundant, which
is the best we can do without a redesign.

Also document the promised service level of isolated metadata.

Added additional tests for the metadata driver as well.

Change-Id: I6b544c5528cb22e5e8846fc47dfb8b05f70f975c
Partial-Bug: #1953165
2023-04-04 09:39:19 -04:00

1652 lines
62 KiB
Python
Raw Blame History

# Copyright 2012 OpenStack Foundation
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
import errno
from os import path
import re
import threading
import time
import eventlet
import netaddr
from neutron_lib import constants
from neutron_lib import exceptions
from oslo_config import cfg
from oslo_log import log as logging
from oslo_utils import netutils
from pyroute2.netlink import exceptions as netlink_exceptions
from pyroute2.netlink import rtnl
from pyroute2.netlink.rtnl import ifaddrmsg
from pyroute2.netlink.rtnl import ifinfmsg
from pyroute2 import netns
from neutron._i18n import _
from neutron.agent.common import utils
from neutron.agent.linux import utils as linux_utils
from neutron.common import utils as common_utils
from neutron.privileged.agent.linux import ip_lib as privileged
from neutron.privileged.agent.linux import utils as priv_utils
LOG = logging.getLogger(__name__)
IP_NONLOCAL_BIND = 'net.ipv4.ip_nonlocal_bind'
LOOPBACK_DEVNAME = 'lo'
FB_TUNNEL_DEVICE_NAMES = ['gre0', 'gretap0', 'tunl0', 'erspan0', 'sit0',
'ip6tnl0', 'ip6gre0']
IP_RULE_TABLES = {'default': 253,
'main': 254,
'local': 255}
IP_RULE_TABLES_NAMES = {v: k for k, v in IP_RULE_TABLES.items()}
# Rule indexes: pyroute2.netlink.rtnl
# Rule names: https://www.systutorials.com/docs/linux/man/8-ip-rule/
# NOTE(ralonsoh): 'masquerade' type is printed as 'nat' in 'ip rule' command
IP_RULE_TYPES = {0: 'unspecified',
1: 'unicast',
6: 'blackhole',
7: 'unreachable',
8: 'prohibit',
10: 'nat'}
IP_ADDRESS_SCOPE = {rtnl.rtscopes['RT_SCOPE_UNIVERSE']: 'global',
rtnl.rtscopes['RT_SCOPE_SITE']: 'site',
rtnl.rtscopes['RT_SCOPE_LINK']: 'link',
rtnl.rtscopes['RT_SCOPE_HOST']: 'host'}
IP_ADDRESS_SCOPE_NAME = {v: k for k, v in IP_ADDRESS_SCOPE.items()}
IP_ADDRESS_EVENTS = {'RTM_NEWADDR': 'added',
'RTM_DELADDR': 'removed'}
SYS_NET_PATH = '/sys/class/net'
DEFAULT_GW_PATTERN = re.compile(r"via (\S+)")
METRIC_PATTERN = re.compile(r"metric (\S+)")
DEVICE_NAME_PATTERN = re.compile(r"(\d+?): (\S+?):.*")
# NOTE: no metric is interpreted by the kernel as having the highest priority
# (value 0). "ip route" uses the netlink API to communicate with the kernel. In
# IPv6, when the metric value is not set is translated as 1024 as default:
# https://access.redhat.com/solutions/3659171
IP_ROUTE_METRIC_DEFAULT = {constants.IP_VERSION_4: 0,
constants.IP_VERSION_6: 1024}
def remove_interface_suffix(interface):
"""Remove a possible "<if>@<endpoint>" suffix from an interface' name.
This suffix can appear in some kernel versions, and intends on specifying,
for example, a veth's pair. However, this interface name is useless to us
as further 'ip' commands require that the suffix be removed.
"""
# If '@' is not present, this will do nothing.
return interface.partition("@")[0]
class AddressNotReady(exceptions.NeutronException):
message = _("Failure waiting for address %(address)s to "
"become ready: %(reason)s")
class DADFailed(AddressNotReady):
pass
InvalidArgument = privileged.InvalidArgument
class SubProcessBase(object):
def __init__(self, namespace=None,
log_fail_as_error=True):
self.namespace = namespace
self.log_fail_as_error = log_fail_as_error
try:
self.force_root = cfg.CONF.ip_lib_force_root
except cfg.NoSuchOptError:
# Only callers that need to force use of the root helper
# need to register the option.
self.force_root = False
def _run(self, options, command, args):
if self.namespace:
return self._as_root(options, command, args)
elif self.force_root:
# Force use of the root helper to ensure that commands
# will execute in dom0 when running under XenServer/XCP.
return self._execute(options, command, args, run_as_root=True)
else:
return self._execute(options, command, args)
def _as_root(self, options, command, args, use_root_namespace=False):
namespace = self.namespace if not use_root_namespace else None
return self._execute(options, command, args, run_as_root=True,
namespace=namespace)
def _execute(self, options, command, args, run_as_root=False,
namespace=None):
opt_list = ['-%s' % o for o in options]
ip_cmd = add_namespace_to_cmd(['ip'], namespace)
cmd = ip_cmd + opt_list + [command] + list(args)
return utils.execute(cmd, run_as_root=run_as_root, privsep_exec=True,
log_fail_as_error=self.log_fail_as_error)
def set_log_fail_as_error(self, fail_with_error):
self.log_fail_as_error = fail_with_error
def get_log_fail_as_error(self):
return self.log_fail_as_error
class IPWrapper(SubProcessBase):
def __init__(self, namespace=None):
super(IPWrapper, self).__init__(namespace=namespace)
self.netns = IpNetnsCommand(self)
def device(self, name):
return IPDevice(name, namespace=self.namespace)
def get_devices_info(self, exclude_loopback=True,
exclude_fb_tun_devices=True):
devices = get_devices_info(self.namespace)
retval = []
for device in devices:
if (exclude_loopback and device['name'] == LOOPBACK_DEVNAME or
exclude_fb_tun_devices and
device['name'] in FB_TUNNEL_DEVICE_NAMES):
continue
retval.append(device)
return retval
def get_devices(self, exclude_loopback=True, exclude_fb_tun_devices=True):
retval = []
try:
devices = privileged.get_device_names(self.namespace)
except privileged.NetworkNamespaceNotFound:
return retval
for name in devices:
if (exclude_loopback and name == LOOPBACK_DEVNAME or
exclude_fb_tun_devices and name in FB_TUNNEL_DEVICE_NAMES):
continue
retval.append(IPDevice(name, namespace=self.namespace))
return retval
def get_device_by_ip(self, ip):
"""Get the IPDevice from system which has ip configured.
@param ip: look for the device holding this ip. If this is None,
None is returned.
@type ip: str.
"""
if not ip:
return None
cidr = common_utils.ip_to_cidr(ip)
kwargs = {'address': common_utils.cidr_to_ip(cidr)}
if not common_utils.is_cidr_host(cidr):
kwargs['mask'] = common_utils.cidr_mask_length(cidr)
devices = get_devices_with_ip(self.namespace, **kwargs)
if not devices:
# Search by broadcast address.
broadcast = common_utils.cidr_broadcast_address(cidr)
if broadcast:
devices = get_devices_with_ip(self.namespace,
broadcast=broadcast)
if devices:
return IPDevice(devices[0]['name'], namespace=self.namespace)
def add_tuntap(self, name, mode='tap'):
privileged.create_interface(
name, self.namespace, "tuntap", mode=mode)
return IPDevice(name, namespace=self.namespace)
def add_veth(self, name1, name2, namespace2=None):
peer = {'ifname': name2}
if namespace2 is None:
namespace2 = self.namespace
else:
self.ensure_namespace(namespace2)
peer['net_ns_fd'] = namespace2
privileged.create_interface(
name1, self.namespace, 'veth', peer=peer)
return (IPDevice(name1, namespace=self.namespace),
IPDevice(name2, namespace=namespace2))
def add_macvtap(self, name, src_dev, mode='bridge'):
privileged.create_interface(name,
self.namespace,
"macvtap",
physical_interface=src_dev,
mode=mode)
return IPDevice(name, namespace=self.namespace)
def del_veth(self, name):
"""Delete a virtual interface between two namespaces."""
privileged.delete_interface(name, self.namespace)
def add_dummy(self, name):
"""Create a Linux dummy interface with the given name."""
privileged.create_interface(name, self.namespace, "dummy")
return IPDevice(name, namespace=self.namespace)
def ensure_namespace(self, name):
if not self.netns.exists(name):
ip = self.netns.add(name)
lo = ip.device(LOOPBACK_DEVNAME)
lo.link.set_up()
else:
ip = IPWrapper(namespace=name)
return ip
def namespace_is_empty(self):
return not self.get_devices()
def garbage_collect_namespace(self):
"""Conditionally destroy the namespace if it is empty."""
if self.namespace and self.netns.exists(self.namespace):
if self.namespace_is_empty():
self.netns.delete(self.namespace)
return True
return False
def add_device_to_namespace(self, device, is_ovs_port=False):
if self.namespace:
device.link.set_netns(self.namespace, is_ovs_port=is_ovs_port)
def add_vlan(self, name, physical_interface, vlan_id):
privileged.create_interface(name,
self.namespace,
"vlan",
physical_interface=physical_interface,
vlan_id=vlan_id)
return IPDevice(name, namespace=self.namespace)
def add_vxlan(self, name, vni, dev, group=None, ttl=None, tos=None,
local=None, srcport=None, dstport=None, proxy=False):
kwargs = {'vxlan_id': vni,
'physical_interface': dev}
if group:
try:
ip_version = common_utils.get_ip_version(group)
if ip_version == constants.IP_VERSION_6:
kwargs['vxlan_group6'] = group
else:
kwargs['vxlan_group'] = group
except netaddr.core.AddrFormatError:
err_msg = _("Invalid group address: %s") % group
raise exceptions.InvalidInput(error_message=err_msg)
if dev:
kwargs['physical_interface'] = dev
if ttl:
kwargs['vxlan_ttl'] = ttl
if tos:
kwargs['vxlan_tos'] = tos
if local:
try:
ip_version = common_utils.get_ip_version(local)
if ip_version == constants.IP_VERSION_6:
kwargs['vxlan_local6'] = local
else:
kwargs['vxlan_local'] = local
except netaddr.core.AddrFormatError:
err_msg = _("Invalid local address: %s") % local
raise exceptions.InvalidInput(error_message=err_msg)
if proxy:
kwargs['vxlan_proxy'] = proxy
# tuple: min,max
if srcport:
if len(srcport) == 2 and srcport[0] <= srcport[1]:
kwargs['vxlan_port_range'] = (str(srcport[0]), str(srcport[1]))
else:
raise exceptions.NetworkVxlanPortRangeError(
vxlan_range=srcport)
if dstport:
kwargs['vxlan_port'] = dstport
privileged.create_interface(name, self.namespace, "vxlan", **kwargs)
return (IPDevice(name, namespace=self.namespace))
class IPDevice(SubProcessBase):
def __init__(self, name, namespace=None, kind='link'):
super(IPDevice, self).__init__(namespace=namespace)
self._name = name
self.kind = kind
self.link = IpLinkCommand(self)
self.addr = IpAddrCommand(self)
self.route = IpRouteCommand(self)
self.neigh = IpNeighCommand(self)
def __eq__(self, other):
return (other is not None and self.name == other.name and
self.namespace == other.namespace)
def __str__(self):
return self.name
def __repr__(self):
return "<IPDevice(name=%s, namespace=%s)>" % (self._name,
self.namespace)
def exists(self):
"""Return True if the device exists in the namespace."""
return privileged.interface_exists(self.name, self.namespace)
def delete_addr_and_conntrack_state(self, cidr):
"""Delete an address along with its conntrack state
This terminates any active connections through an IP.
:param cidr: the IP address for which state should be removed.
This can be passed as a string with or without /NN.
A netaddr.IPAddress or netaddr.Network representing the IP address
can also be passed.
"""
self.addr.delete(cidr)
self.delete_conntrack_state(cidr)
def delete_conntrack_state(self, cidr):
"""Delete conntrack state rules
Deletes both rules (if existing), the destination and the reply one.
"""
ip_str = str(netaddr.IPNetwork(cidr).ip)
ip_wrapper = IPWrapper(namespace=self.namespace)
# Delete conntrack state for ingress traffic
# If 0 flow entries have been deleted
# conntrack -D will return 1
try:
ip_wrapper.netns.execute(["conntrack", "-D", "-d", ip_str],
check_exit_code=True,
extra_ok_codes=[1], privsep_exec=True)
except RuntimeError:
LOG.exception("Failed deleting ingress connection state of"
" floatingip %s", ip_str)
# Delete conntrack state for egress traffic
try:
ip_wrapper.netns.execute(["conntrack", "-D", "-q", ip_str],
check_exit_code=True,
extra_ok_codes=[1], privsep_exec=True)
except RuntimeError:
LOG.exception("Failed deleting egress connection state of"
" floatingip %s", ip_str)
def delete_socket_conntrack_state(self, cidr, dport, protocol):
ip_str = str(netaddr.IPNetwork(cidr).ip)
ip_wrapper = IPWrapper(namespace=self.namespace)
cmd = ["conntrack", "-D", "-d", ip_str, '-p', protocol,
'--dport', dport]
try:
ip_wrapper.netns.execute(cmd, check_exit_code=True,
extra_ok_codes=[1], privsep_exec=True)
except RuntimeError:
LOG.exception("Failed deleting ingress connection state of "
"socket %(ip)s:%(port)s", {'ip': ip_str,
'port': dport})
def disable_ipv6(self):
if not netutils.is_ipv6_enabled():
return
sysctl_name = re.sub(r'\.', '/', self.name)
cmd = ['net.ipv6.conf.%s.disable_ipv6=1' % sysctl_name]
return sysctl(cmd, namespace=self.namespace)
@property
def name(self):
if self._name:
return self._name[:constants.DEVICE_NAME_MAX_LEN]
return self._name
@name.setter
def name(self, name):
self._name = name
class IpDeviceCommandBase(object):
def __init__(self, parent):
self._parent = parent
@property
def name(self):
return self._parent.name
@property
def kind(self):
return self._parent.kind
class IpLinkCommand(IpDeviceCommandBase):
def set_address(self, mac_address):
privileged.set_link_attribute(
self.name, self._parent.namespace, address=mac_address)
def set_allmulticast_on(self):
privileged.set_link_flags(
self.name, self._parent.namespace, ifinfmsg.IFF_ALLMULTI)
def set_mtu(self, mtu_size):
privileged.set_link_attribute(
self.name, self._parent.namespace, mtu=mtu_size)
def set_up(self):
privileged.set_link_attribute(
self.name, self._parent.namespace, state='up')
def set_down(self):
privileged.set_link_attribute(
self.name, self._parent.namespace, state='down')
def set_netns(self, namespace, is_ovs_port=False):
privileged.set_link_attribute(
self.name, self._parent.namespace, net_ns_fd=namespace)
self._parent.namespace = namespace
if is_ovs_port:
# NOTE(slaweq): because of the "shy port" which may dissapear for
# short time after it's moved to the namespace we need to wait
# a bit before checking if port really exists in the namespace
time.sleep(1)
common_utils.wait_until_true(lambda: self.exists, timeout=5,
sleep=0.5)
def set_name(self, name):
privileged.set_link_attribute(
self.name, self._parent.namespace, ifname=name)
self._parent.name = name
def set_alias(self, alias_name):
privileged.set_link_attribute(
self.name, self._parent.namespace, ifalias=alias_name)
def create(self):
privileged.create_interface(self.name, self._parent.namespace,
self.kind)
def delete(self):
privileged.delete_interface(self.name, self._parent.namespace)
@property
def address(self):
return self.attributes.get('link/ether')
@property
def state(self):
return self.attributes.get('state')
@property
def allmulticast(self):
return self.attributes.get('allmulticast')
@property
def mtu(self):
return self.attributes.get('mtu')
@property
def qdisc(self):
return self.attributes.get('qdisc')
@property
def qlen(self):
return self.attributes.get('qlen')
@property
def alias(self):
return self.attributes.get('alias')
@property
def link_kind(self):
return self.attributes.get('link_kind')
@property
def attributes(self):
return privileged.get_link_attributes(self.name,
self._parent.namespace)
@property
def exists(self):
return privileged.interface_exists(self.name, self._parent.namespace)
def get_vfs(self):
return privileged.get_link_vfs(self.name, self._parent.namespace)
def set_vf_feature(self, vf_config):
privileged.set_link_vf_feature(self.name, self._parent.namespace,
vf_config)
class IpAddrCommand(IpDeviceCommandBase):
def add(self, cidr, scope='global', add_broadcast=True):
add_ip_address(cidr, self.name, self._parent.namespace, scope,
add_broadcast)
def add_multiple(self, cidrs, scope='global', add_broadcast=True):
add_ip_addresses(cidrs, self.name, self._parent.namespace, scope,
add_broadcast)
def delete(self, cidr):
delete_ip_address(cidr, self.name, self._parent.namespace)
def delete_multiple(self, cidrs):
delete_ip_addresses(cidrs, self.name, self._parent.namespace)
def flush(self, ip_version):
flush_ip_addresses(ip_version, self.name, self._parent.namespace)
def list(self, scope=None, to=None, filters=None, ip_version=None):
"""Get device details of a device named <self.name>."""
def filter_device(device, filters):
# Accepted filters: dynamic, permanent, tentative, dadfailed.
for filter in filters:
if filter == 'permanent' and device['dynamic']:
return False
elif not device[filter]:
return False
return True
kwargs = {}
if to:
cidr = common_utils.ip_to_cidr(to)
kwargs = {'address': common_utils.cidr_to_ip(cidr)}
if not common_utils.is_cidr_host(cidr):
kwargs['mask'] = common_utils.cidr_mask_length(cidr)
if scope:
kwargs['scope'] = scope
if ip_version:
kwargs['family'] = common_utils.get_socket_address_family(
ip_version)
devices = get_devices_with_ip(self._parent.namespace, name=self.name,
**kwargs)
if not filters:
return devices
filtered_devices = []
for device in (device for device in devices
if filter_device(device, filters)):
filtered_devices.append(device)
return filtered_devices
def wait_until_address_ready(self, address, wait_time=30):
"""Wait until an address is no longer marked 'tentative' or 'dadfailed'
raises AddressNotReady if times out, address not present on interface
raises DADFailed if Duplicate Address Detection fails
"""
def is_address_ready():
try:
addr_info = self.list(to=address)[0]
except IndexError:
raise AddressNotReady(
address=address,
reason=_('Address not present on interface'))
# Since both 'dadfailed' and 'tentative' will be set if DAD fails,
# check 'dadfailed' first just to be explicit
if addr_info['dadfailed']:
raise DADFailed(
address=address, reason=_('Duplicate address detected'))
if addr_info['tentative']:
return False
return True
errmsg = _("Exceeded %s second limit waiting for "
"address to leave the tentative state.") % wait_time
common_utils.wait_until_true(
is_address_ready, timeout=wait_time, sleep=0.20,
exception=AddressNotReady(address=address, reason=errmsg))
class IpRouteCommand(IpDeviceCommandBase):
def __init__(self, parent, table=None):
super(IpRouteCommand, self).__init__(parent)
self._table = table
def add_gateway(self, gateway, metric=None, table=None, scope='global'):
self.add_route(None, via=gateway, table=table, metric=metric,
scope=scope)
def delete_gateway(self, gateway, table=None, scope=None):
self.delete_route(None, device=self.name, via=gateway, table=table,
scope=scope)
def list_routes(self, ip_version, scope=None, via=None, table=None,
**kwargs):
table = table or self._table
return list_ip_routes(self._parent.namespace, ip_version, scope=scope,
via=via, table=table, device=self.name, **kwargs)
def list_onlink_routes(self, ip_version):
routes = self.list_routes(ip_version, scope='link')
return [r for r in routes if not r['source_prefix']]
def add_onlink_route(self, cidr):
self.add_route(cidr, scope='link')
def delete_onlink_route(self, cidr):
self.delete_route(cidr, device=self.name, scope='link')
def get_gateway(self, scope=None, table=None,
ip_version=constants.IP_VERSION_4):
routes = self.list_routes(ip_version, scope=scope, table=table)
for route in routes:
if route['via'] and route['cidr'] in constants.IP_ANY.values():
return route
def flush(self, ip_version, table=None, **kwargs):
for route in self.list_routes(ip_version, table=table):
self.delete_route(route['cidr'], device=route['device'],
via=route['via'], table=table, **kwargs)
def add_route(self, cidr, via=None, table=None, metric=None, scope=None,
**kwargs):
table = table or self._table
add_ip_route(self._parent.namespace, cidr, device=self.name, via=via,
table=table, metric=metric, scope=scope, **kwargs)
def delete_route(self, cidr, device=None, via=None, table=None, scope=None,
**kwargs):
table = table or self._table
delete_ip_route(self._parent.namespace, cidr, device=device, via=via,
table=table, scope=scope, **kwargs)
class IPRoute(SubProcessBase):
def __init__(self, namespace=None, table=None):
super(IPRoute, self).__init__(namespace=namespace)
self.name = None
self.route = IpRouteCommand(self, table=table)
class IpNeighCommand(IpDeviceCommandBase):
def add(self, ip_address, mac_address, nud_state=None, **kwargs):
add_neigh_entry(ip_address,
mac_address,
self.name,
namespace=self._parent.namespace,
nud_state=nud_state,
**kwargs)
def delete(self, ip_address, mac_address, **kwargs):
delete_neigh_entry(ip_address,
mac_address,
self.name,
self._parent.namespace,
**kwargs)
def dump(self, ip_version, **kwargs):
return dump_neigh_entries(ip_version,
self.name,
self._parent.namespace,
**kwargs)
def flush(self, ip_version, ip_address):
"""Flush neighbour entries
Given address entry is removed from neighbour cache (ARP or NDP). To
flush all entries pass string 'all' as an address.
From https://man.archlinux.org/man/core/iproute2/ip-neighbour.8.en:
"the default neighbour states to be flushed do not include permanent
and noarp".
:param ip_version: Either 4 or 6 for IPv4 or IPv6 respectively
:param ip_address: The prefix selecting the neighbours to flush or
"all"
"""
cidr = netaddr.IPNetwork(ip_address) if ip_address != 'all' else None
for entry in self.dump(ip_version):
if entry['state'] in ('permanent', 'noarp'):
continue
if ip_address == 'all' or entry['dst'] in cidr:
self.delete(entry['dst'], entry['lladdr'])
class IpNetnsCommand(object):
def __init__(self, parent):
self._parent = parent
def add(self, name):
create_network_namespace(name)
wrapper = IPWrapper(namespace=name)
wrapper.netns.execute(['sysctl', '-w',
'net.ipv4.conf.all.promote_secondaries=1'],
privsep_exec=True)
return wrapper
def delete(self, name):
delete_network_namespace(name)
def execute(self, cmds, addl_env=None, check_exit_code=True,
log_fail_as_error=True, extra_ok_codes=None,
run_as_root=False, privsep_exec=False):
ns_params = []
if self._parent.namespace:
run_as_root = True
ns_params = ['ip', 'netns', 'exec', self._parent.namespace]
env_params = []
if addl_env:
env_params = (['env'] +
['%s=%s' % pair for pair in addl_env.items()])
cmd = ns_params + env_params + list(cmds)
return utils.execute(cmd, check_exit_code=check_exit_code,
extra_ok_codes=extra_ok_codes,
log_fail_as_error=log_fail_as_error,
run_as_root=run_as_root,
privsep_exec=privsep_exec)
def exists(self, name):
return network_namespace_exists(name)
def vlan_in_use(segmentation_id, namespace=None):
"""Return True if VLAN ID is in use by an interface, else False."""
interfaces = get_devices_info(namespace)
vlans = {interface.get('vlan_id') for interface in interfaces
if interface.get('vlan_id')}
return segmentation_id in vlans
def vxlan_in_use(segmentation_id, namespace=None):
"""Return True if VXLAN VNID is in use by an interface, else False."""
interfaces = get_devices_info(namespace)
vxlans = {interface.get('vxlan_id') for interface in interfaces
if interface.get('vxlan_id')}
return segmentation_id in vxlans
def device_exists(device_name, namespace=None):
"""Return True if the device exists in the namespace."""
return IPDevice(device_name, namespace=namespace).exists()
def device_exists_with_ips_and_mac(device_name, ip_cidrs, mac, namespace=None):
"""Return True if the device with the given IP addresses and MAC address
exists in the namespace.
"""
try:
device = IPDevice(device_name, namespace=namespace)
if mac and mac != device.link.address:
return False
device_ip_cidrs = [ip['cidr'] for ip in device.addr.list()]
for ip_cidr in ip_cidrs:
if ip_cidr not in device_ip_cidrs:
return False
except RuntimeError:
return False
else:
return True
def get_device_mac(device_name, namespace=None):
"""Return the MAC address of the device."""
return IPDevice(device_name, namespace=namespace).link.address
def get_device_mtu(device_name, namespace=None):
"""Return the MTU value of the device."""
return IPDevice(device_name, namespace=namespace).link.mtu
NetworkNamespaceNotFound = privileged.NetworkNamespaceNotFound
NetworkInterfaceNotFound = privileged.NetworkInterfaceNotFound
IpAddressAlreadyExists = privileged.IpAddressAlreadyExists
def add_ip_address(cidr, device, namespace=None, scope='global',
add_broadcast=True):
"""Add an IP address.
:param cidr: IP address to add, in CIDR notation
:param device: Device name to use in adding address
:param namespace: The name of the namespace in which to add the address
:param scope: scope of address being added
:param add_broadcast: should broadcast address be added
"""
net = netaddr.IPNetwork(cidr)
broadcast = None
if add_broadcast:
broadcast = common_utils.cidr_broadcast_address_alternative(cidr)
privileged.add_ip_address(
net.version, str(net.ip), net.prefixlen,
device, namespace, scope, broadcast)
def add_ip_addresses(cidrs, device, namespace=None, scope='global',
add_broadcast=True):
"""Add multiple IP addresses.
:param cidrs: A list of IP addresses to add, in CIDR notation
:param device: Device name to use in adding address
:param namespace: The name of the namespace in which to add the address
:param scope: scope of address being added
:param add_broadcast: should broadcast address be added
"""
privileged.add_ip_addresses(
cidrs, device, namespace, scope, add_broadcast)
def delete_ip_address(cidr, device, namespace=None):
"""Delete an IP address.
:param cidr: IP address to delete, in CIDR notation
:param device: Device name to use in deleting address
:param namespace: The name of the namespace in which to delete the address
"""
net = netaddr.IPNetwork(cidr)
privileged.delete_ip_address(
net.version, str(net.ip), net.prefixlen, device, namespace)
def delete_ip_addresses(cidrs, device, namespace=None):
"""Delete multiple IP address.
:param cidrs: A list of IP addresses to delete, in CIDR notation
:param device: Device name to use in deleting address
:param namespace: The name of the namespace in which to delete the address
"""
privileged.delete_ip_addresses(cidrs, device, namespace)
def flush_ip_addresses(ip_version, device, namespace=None):
"""Flush all IP addresses.
:param ip_version: IP version of addresses to flush
:param device: Device name to use in flushing addresses
:param namespace: The name of the namespace in which to flush the addresses
"""
privileged.flush_ip_addresses(ip_version, device, namespace)
# NOTE(haleyb): These neighbour functions live outside the IpNeighCommand
# class since not all callers require it.
def add_neigh_entry(ip_address, mac_address, device, namespace=None,
nud_state=None, **kwargs):
"""Add a neighbour entry.
:param ip_address: IP address of entry to add
:param mac_address: MAC address of entry to add
:param device: Device name to use in adding entry
:param namespace: The name of the namespace in which to add the entry
:param nud_state: The NUD (Neighbour Unreachability Detection) state of
the entry; defaults to "permanent"
"""
ip_version = common_utils.get_ip_version(ip_address)
nud_state = nud_state or 'permanent'
privileged.add_neigh_entry(ip_version,
ip_address,
mac_address,
device,
namespace,
nud_state,
**kwargs)
def delete_neigh_entry(ip_address, mac_address, device, namespace=None,
**kwargs):
"""Delete a neighbour entry.
:param ip_address: IP address of entry to delete
:param mac_address: MAC address of entry to delete
:param device: Device name to use in deleting entry
:param namespace: The name of the namespace in which to delete the entry
"""
ip_version = common_utils.get_ip_version(ip_address)
privileged.delete_neigh_entry(ip_version,
ip_address,
mac_address,
device,
namespace,
**kwargs)
def dump_neigh_entries(ip_version, device=None, namespace=None, **kwargs):
"""Dump all neighbour entries.
:param ip_version: IP version of entries to show (4 or 6)
:param device: Device name to use in dumping entries
:param namespace: The name of the namespace in which to dump the entries
:param kwargs: Callers add any filters they use as kwargs
:return: a list of dictionaries, each representing a neighbour.
The dictionary format is: {'dst': ip_address,
'lladdr': mac_address,
'device': device_name}
"""
return list(privileged.dump_neigh_entries(ip_version,
device,
namespace,
**kwargs))
def create_network_namespace(namespace, **kwargs):
"""Create a network namespace.
:param namespace: The name of the namespace to create
:param kwargs: Callers add any filters they use as kwargs
"""
privileged.create_netns(namespace, **kwargs)
def delete_network_namespace(namespace, **kwargs):
"""Delete a network namespace.
:param namespace: The name of the namespace to delete
:param kwargs: Callers add any filters they use as kwargs
"""
privileged.remove_netns(namespace, **kwargs)
def list_network_namespaces(**kwargs):
"""List all network namespace entries.
:param kwargs: Callers add any filters they use as kwargs
"""
if cfg.CONF.AGENT.use_helper_for_ns_read:
return privileged.list_netns(**kwargs)
else:
return netns.listnetns(**kwargs)
def network_namespace_exists(namespace, try_is_ready=False, **kwargs):
"""Check if a network namespace exists.
:param namespace: The name of the namespace to check
:param try_is_ready: Try to open the namespace to know if the namespace
is ready to be operated.
:param kwargs: Callers add any filters they use as kwargs
"""
if not namespace:
return False
if not try_is_ready:
nspath = kwargs.get('nspath') or netns.NETNS_RUN_DIR
nspath += '/' + namespace
if cfg.CONF.AGENT.use_helper_for_ns_read:
return priv_utils.path_exists(nspath)
else:
return path.exists(nspath)
try:
privileged.open_namespace(namespace)
return True
except (RuntimeError, OSError):
pass
return False
def list_namespace_pids(namespace):
"""List namespace process PIDs
:param namespace: (string) the name of the namespace
:return: (tuple)
"""
return privileged.list_ns_pids(namespace)
def ensure_device_is_ready(device_name, namespace=None):
dev = IPDevice(device_name, namespace=namespace)
try:
# Ensure the device has a MAC address and is up, even if it is already
# up.
if not dev.link.exists or not dev.link.address:
LOG.info("Device %s cannot be used as it has no MAC "
"address", device_name)
return False
dev.link.set_up()
except RuntimeError:
return False
return True
def iproute_arg_supported(command, arg):
command += ['help']
stdout, stderr = utils.execute(command, check_exit_code=False,
return_stderr=True, log_fail_as_error=False)
return any(arg in line for line in stderr.split('\n'))
def _arping(ns_name, iface_name, address, count, log_exception):
# Due to a Linux kernel bug*, it's advised to spread gratuitous updates
# more, injecting an interval between consequent packets that is longer
# than 1s which is currently hardcoded** in arping. To achieve that, we
# call arping tool the 'count' number of times, each issuing a single ARP
# update, and wait between iterations.
#
# * https://patchwork.ozlabs.org/patch/760372/
# ** https://github.com/iputils/iputils/pull/86
first = True
# Since arping is used to send gratuitous ARP, a response is
# not expected. In some cases (no response) and with some
# platforms (>=Ubuntu 14.04), arping exit code can be 1.
extra_ok_codes = [1]
ip_wrapper = IPWrapper(namespace=ns_name)
for i in range(count):
if not first:
# hopefully enough for kernel to get out of locktime loop
time.sleep(2)
# On the second (and subsequent) arping calls, we can get a
# "bind: Cannot assign requested address" error since
# the IP address might have been deleted concurrently.
# We will log an error below if this isn't the case, so
# no need to have execute() log one as well.
extra_ok_codes = [1, 2]
first = False
# some Linux kernels* don't honour REPLYs. Send both gratuitous REQUEST
# and REPLY packets (REQUESTs are left for backwards compatibility for
# in case if some network peers, vice versa, honor REPLYs and not
# REQUESTs)
#
# * https://patchwork.ozlabs.org/patch/763016/
for arg in ('-U', '-A'):
arping_cmd = ['arping', arg, '-I', iface_name, '-c', 1,
# Pass -w to set timeout to ensure exit if interface
# removed while running
'-w', 2, address]
try:
ip_wrapper.netns.execute(arping_cmd,
extra_ok_codes=extra_ok_codes,
privsep_exec=True)
except Exception as exc:
# Since this is spawned in a thread and executed 2 seconds
# apart, something may have been deleted while we were
# sleeping. Downgrade message to info and return early
# unless it was the first try.
exists = device_exists_with_ips_and_mac(iface_name,
[address],
mac=None,
namespace=ns_name)
msg = ("Failed sending gratuitous ARP to %(addr)s on "
"%(iface)s in namespace %(ns)s: %(err)s")
logger_method = LOG.exception
if not (log_exception and (first or exists)):
logger_method = LOG.info
logger_method(msg, {'addr': address,
'iface': iface_name,
'ns': ns_name,
'err': exc})
if not exists:
LOG.info("Interface %(iface)s or address %(addr)s "
"in namespace %(ns)s was deleted concurrently",
{'iface': iface_name,
'addr': address,
'ns': ns_name})
return
def send_ip_addr_adv_notif(
ns_name, iface_name, address, count=3, log_exception=True,
use_eventlet=True):
"""Send advance notification of an IP address assignment.
If the address is in the IPv4 family, send gratuitous ARP.
If the address is in the IPv6 family, no advance notification is
necessary, since the Neighbor Discovery Protocol (NDP), Duplicate
Address Discovery (DAD), and (for stateless addresses) router
advertisements (RAs) are sufficient for address resolution and
duplicate address detection.
:param ns_name: Namespace name which GARPs are gonna be sent from.
:param iface_name: Name of interface which GARPs are gonna be sent from.
:param address: Advertised IP address.
:param count: (Optional) How many GARPs are gonna be sent. Default is 3.
:param log_exception: (Optional) True if possible failures should be logged
on exception level. Otherwise they are logged on
WARNING level. Default is True.
:param use_eventlet: (Optional) True if the arping command will be spawned
using eventlet, False to use Python threads
(threading).
"""
def arping():
_arping(ns_name, iface_name, address, count, log_exception)
if count > 0 and netaddr.IPAddress(address).version == 4:
if use_eventlet:
eventlet.spawn_n(arping)
else:
threading.Thread(target=arping).start()
def sysctl(cmd, namespace=None, log_fail_as_error=True):
"""Run sysctl command 'cmd'
@param cmd: a list containing the sysctl command to run
@param namespace: network namespace to run command in
@param log_fail_as_error: failure logged as LOG.error
execute() doesn't return the exit status of the command it runs,
it returns stdout and stderr. Setting check_exit_code=True will cause
it to raise a RuntimeError if the exit status of the command is
non-zero, which in sysctl's case is an error. So we're normalizing
that into zero (success) and one (failure) here to mimic what
"echo $?" in a shell would be.
This is all because sysctl is too verbose and prints the value you
just set on success, unlike most other utilities that print nothing.
execute() will have dumped a message to the logs with the actual
output on failure, so it's not lost, and we don't need to print it
here.
"""
cmd = ['sysctl', '-w'] + cmd
ip_wrapper = IPWrapper(namespace=namespace)
try:
ip_wrapper.netns.execute(cmd, run_as_root=True,
log_fail_as_error=log_fail_as_error,
privsep_exec=True)
except RuntimeError as rte:
LOG.warning(
"Setting %(cmd)s in namespace %(ns)s failed: %(err)s.",
{'cmd': cmd,
'ns': namespace,
'err': rte})
return 1
return 0
def add_namespace_to_cmd(cmd, namespace=None):
"""Add an optional namespace to the command."""
return ['ip', 'netns', 'exec', namespace] + cmd if namespace else cmd
def get_ipv6_lladdr(mac_addr):
return '%s/64' % netaddr.EUI(mac_addr).ipv6_link_local()
def get_ip_nonlocal_bind(namespace=None):
"""Get kernel option value of ip_nonlocal_bind in given namespace."""
cmd = ['sysctl', '-bn', IP_NONLOCAL_BIND]
ip_wrapper = IPWrapper(namespace)
return int(ip_wrapper.netns.execute(cmd, run_as_root=True,
privsep_exec=True))
def set_ip_nonlocal_bind(value, namespace=None, log_fail_as_error=True):
"""Set sysctl knob of ip_nonlocal_bind to given value."""
cmd = ['%s=%d' % (IP_NONLOCAL_BIND, value)]
return sysctl(cmd, namespace=namespace,
log_fail_as_error=log_fail_as_error)
def set_ip_nonlocal_bind_for_namespace(namespace, value, root_namespace=False):
"""Set ip_nonlocal_bind but don't raise exception on failure."""
failed = set_ip_nonlocal_bind(value, namespace=namespace,
log_fail_as_error=False)
if failed and root_namespace:
# Somewhere in the 3.19 kernel timeframe ip_nonlocal_bind was
# changed to be a per-namespace attribute. To be backwards
# compatible we need to try both if at first we fail.
LOG.debug('Namespace (%s) does not support setting %s, '
'trying in root namespace', namespace, IP_NONLOCAL_BIND)
return set_ip_nonlocal_bind(value)
if failed:
LOG.warning(
"%s will not be set to %d in the root namespace in order to "
"not break DVR, which requires this value be set to 1. This "
"may introduce a race between moving a floating IP to a "
"different network node, and the peer side getting a "
"populated ARP cache for a given floating IP address.",
IP_NONLOCAL_BIND, value)
def get_ipv6_forwarding(device, namespace=None):
"""Get kernel value of IPv6 forwarding for device in given namespace."""
cmd = ['sysctl', '-b', "net.ipv6.conf.%s.forwarding" % device]
ip_wrapper = IPWrapper(namespace)
return int(ip_wrapper.netns.execute(cmd, run_as_root=True,
privsep_exec=True))
def _parse_ip_rule(rule, ip_version):
"""Parse a pyroute2 rule and returns a dictionary
Parameters contained in the returned dictionary:
- priority: rule priority
- from: source IP address
- to: (optional) destination IP address
- type: rule type (see RULE_TYPES)
- table: table name or number (see RULE_TABLES)
- fwmark: (optional) FW mark
- iif: (optional) input interface name
- oif: (optional) output interface name
:param rule: pyroute2 rule dictionary
:param ip_version: IP version (4, 6)
:return: dictionary with IP rule information
"""
parsed_rule = {'priority': str(rule['attrs'].get('FRA_PRIORITY', 0))}
from_ip = rule['attrs'].get('FRA_SRC')
if from_ip:
parsed_rule['from'] = common_utils.ip_to_cidr(
from_ip, prefix=rule['src_len'])
if common_utils.is_cidr_host(parsed_rule['from']):
parsed_rule['from'] = common_utils.cidr_to_ip(parsed_rule['from'])
else:
parsed_rule['from'] = constants.IP_ANY[ip_version]
to_ip = rule['attrs'].get('FRA_DST')
if to_ip:
parsed_rule['to'] = common_utils.ip_to_cidr(
to_ip, prefix=rule['dst_len'])
if common_utils.is_cidr_host(parsed_rule['to']):
parsed_rule['to'] = common_utils.cidr_to_ip(parsed_rule['to'])
parsed_rule['type'] = IP_RULE_TYPES[rule['action']]
table_num = rule['attrs']['FRA_TABLE']
for table_name in (name for (name, index) in
IP_RULE_TABLES.items() if index == table_num):
parsed_rule['table'] = table_name
break
else:
parsed_rule['table'] = str(table_num)
fwmark = rule['attrs'].get('FRA_FWMARK')
if fwmark:
fwmask = rule['attrs'].get('FRA_FWMASK')
parsed_rule['fwmark'] = '{0:#x}/{1:#x}'.format(fwmark, fwmask)
iifname = rule['attrs'].get('FRA_IIFNAME')
if iifname:
parsed_rule['iif'] = iifname
oifname = rule['attrs'].get('FRA_OIFNAME')
if oifname:
parsed_rule['oif'] = oifname
return parsed_rule
def list_ip_rules(namespace, ip_version):
"""List all IP rules in a namespace
:param namespace: namespace name
:param ip_version: IP version (4, 6)
:return: list of dictionaries with the rules information
"""
rules = privileged.list_ip_rules(namespace, ip_version)
return [_parse_ip_rule(rule, ip_version) for rule in rules]
def _make_pyroute2_args(ip, iif, table, priority, to):
"""Returns a dictionary of arguments to be used in pyroute rule commands
:param ip: (string) source IP or CIDR address (IPv4, IPv6)
:param iif: (string) input interface name
:param table: (string, int) table number (as an int or a string) or table
name ('default', 'main', 'local')
:param priority: (string, int) rule priority
:param to: (string) destination IP or CIDR address (IPv4, IPv6)
:return: a dictionary with the kwargs needed in pyroute rule commands
"""
ip_version = common_utils.get_ip_version(ip)
# In case we need to add a rule based on an incoming interface, no
# IP address is given; the rule default source ("from") address is
# "all".
cmd_args = {'family': common_utils.get_socket_address_family(ip_version)}
if iif:
cmd_args['iifname'] = iif
else:
cmd_args['src'] = common_utils.cidr_to_ip(ip)
cmd_args['src_len'] = common_utils.cidr_mask(ip)
if to:
cmd_args['dst'] = common_utils.cidr_to_ip(to)
cmd_args['dst_len'] = common_utils.cidr_mask(to)
if table:
cmd_args['table'] = IP_RULE_TABLES.get(table) or int(table)
if priority:
cmd_args['priority'] = int(priority)
return cmd_args
def _exist_ip_rule(rules, ip, iif, table, priority, to):
"""Check if any rule matches the conditions"""
for rule in rules:
if iif and rule.get('iif') != iif:
continue
if not iif and rule['from'] != ip:
continue
if table and rule.get('table') != str(table):
continue
if priority and rule['priority'] != str(priority):
continue
if to and rule.get('to') != to:
continue
break
else:
return False
return True
def add_ip_rule(namespace, ip, iif=None, table=IP_RULE_TABLES['default'],
priority=None, to=None):
"""Create an IP rule in a namespace
"table" parameter cannot be an empty value (None). By default, this method
will assign "IP_RULE_TABLES['default']" value if None is passed.
:param namespace: (string) namespace name
:param ip: (string) source IP or CIDR address (IPv4, IPv6)
:param iif: (Optional) (string) input interface name
:param table: (Optional) (string, int) table number
:param priority: (Optional) (string, int) rule priority
:param to: (Optional) (string) destination IP or CIDR address (IPv4, IPv6)
"""
table = table if table is not None else IP_RULE_TABLES['default']
ip_version = common_utils.get_ip_version(ip)
rules = list_ip_rules(namespace, ip_version)
if _exist_ip_rule(rules, ip, iif, table, priority, to):
return
cmd_args = _make_pyroute2_args(ip, iif, table, priority, to)
privileged.add_ip_rule(namespace, **cmd_args)
def delete_ip_rule(namespace, ip, iif=None, table=None, priority=None,
to=None):
"""Delete an IP rule in a namespace
:param namespace: (string) namespace name
:param ip: (string) source IP or CIDR address (IPv4, IPv6)
:param iif: (Optional) (string) input interface name
:param table: (Optional) (string, int) table number
:param priority: (Optional) (string, int) rule priority
:param to: (Optional) (string) destination IP or CIDR address (IPv4, IPv6)
"""
cmd_args = _make_pyroute2_args(ip, iif, table, priority, to)
privileged.delete_ip_rule(namespace, **cmd_args)
def _parse_ip_address(pyroute2_address, device_name):
ip = linux_utils.get_attr(pyroute2_address, 'IFA_ADDRESS')
ip_length = pyroute2_address['prefixlen']
event = IP_ADDRESS_EVENTS.get(pyroute2_address.get('event'))
cidr = common_utils.ip_to_cidr(ip, prefix=ip_length)
flags = linux_utils.get_attr(pyroute2_address, 'IFA_FLAGS')
dynamic = not bool(flags & ifaddrmsg.IFA_F_PERMANENT)
tentative = bool(flags & ifaddrmsg.IFA_F_TENTATIVE)
dadfailed = bool(flags & ifaddrmsg.IFA_F_DADFAILED)
scope = IP_ADDRESS_SCOPE[pyroute2_address['scope']]
return {'name': device_name,
'cidr': cidr,
'scope': scope,
'broadcast': linux_utils.get_attr(pyroute2_address,
'IFA_BROADCAST'),
'dynamic': dynamic,
'tentative': tentative,
'dadfailed': dadfailed,
'event': event}
def get_devices_with_ip(namespace, name=None, **kwargs):
retval = []
link_args = {}
if name:
link_args['ifname'] = name
scope = kwargs.pop('scope', None)
if scope:
kwargs['scope'] = IP_ADDRESS_SCOPE_NAME[scope]
if not link_args:
ip_addresses = privileged.get_ip_addresses(namespace, **kwargs)
else:
device = get_devices_info(namespace, **link_args)
if not device:
return retval
ip_addresses = privileged.get_ip_addresses(
namespace, index=device[0]['index'], **kwargs)
devices = {} # {device index: name}
for ip_address in ip_addresses:
index = ip_address['index']
name = (linux_utils.get_attr(ip_address, 'IFA_LABEL') or
devices.get(index))
if not name:
device = get_devices_info(namespace, index=index)
if not device:
continue
name = device[0]['name']
retval.append(_parse_ip_address(ip_address, name))
devices[index] = name
return retval
def get_devices_info(namespace, **kwargs):
devices = privileged.get_link_devices(namespace, **kwargs)
retval = {}
for device in devices:
ret = {'index': device['index'],
'name': linux_utils.get_attr(device, 'IFLA_IFNAME'),
'operstate': linux_utils.get_attr(device, 'IFLA_OPERSTATE'),
'linkmode': linux_utils.get_attr(device, 'IFLA_LINKMODE'),
'mtu': linux_utils.get_attr(device, 'IFLA_MTU'),
'promiscuity': linux_utils.get_attr(device, 'IFLA_PROMISCUITY'),
'mac': linux_utils.get_attr(device, 'IFLA_ADDRESS'),
'broadcast': linux_utils.get_attr(device, 'IFLA_BROADCAST')}
ifla_link = linux_utils.get_attr(device, 'IFLA_LINK')
if ifla_link:
ret['parent_index'] = ifla_link
ifla_linkinfo = linux_utils.get_attr(device, 'IFLA_LINKINFO')
if ifla_linkinfo:
ret['kind'] = linux_utils.get_attr(ifla_linkinfo, 'IFLA_INFO_KIND')
ifla_data = linux_utils.get_attr(ifla_linkinfo, 'IFLA_INFO_DATA')
if ret['kind'] == 'vxlan':
ret['vxlan_id'] = linux_utils.get_attr(ifla_data,
'IFLA_VXLAN_ID')
ret['vxlan_group'] = linux_utils.get_attr(ifla_data,
'IFLA_VXLAN_GROUP')
ret['vxlan_link_index'] = linux_utils.get_attr(
ifla_data, 'IFLA_VXLAN_LINK')
elif ret['kind'] == 'vlan':
ret['vlan_id'] = linux_utils.get_attr(ifla_data,
'IFLA_VLAN_ID')
elif ret['kind'] == 'bridge':
ret['stp'] = linux_utils.get_attr(ifla_data,
'IFLA_BR_STP_STATE')
ret['forward_delay'] = linux_utils.get_attr(
ifla_data, 'IFLA_BR_FORWARD_DELAY')
retval[device['index']] = ret
for device in retval.values():
if device.get('parent_index'):
parent_device = retval.get(device['parent_index'])
if parent_device:
device['parent_name'] = parent_device['name']
elif device.get('vxlan_link_index'):
device['vxlan_link_name'] = (
retval[device['vxlan_link_index']]['name'])
return list(retval.values())
def ip_monitor(namespace, queue, event_stop, event_started):
"""Monitor IP address changes
If namespace is not None, this function must be executed as root user, but
cannot use privsep because is a blocking function and can exhaust the
number of working threads.
"""
def get_device_name(index):
try:
with privileged.get_iproute(namespace) as ip:
device = ip.link('get', index=index)
if device:
attrs = device[0].get('attrs', [])
for attr in (attr for attr in attrs
if attr[0] == 'IFLA_IFNAME'):
return attr[1]
except netlink_exceptions.NetlinkError as e:
if e.code == errno.ENODEV:
return
raise
def read_ip_updates(_ip, _queue):
"""Read Pyroute2.IPRoute input socket
The aim of this function is to open and bind an IPRoute socket only for
reading the netlink changes; no other operations are done with this
opened socket. This function is executed in a separate thread,
dedicated only to this task.
"""
_ip.bind(async_cache=True)
try:
while True:
ip_addresses = _ip.get()
for ip_address in ip_addresses:
LOG.debug("IP monitor %s; Adding IP address: %s "
"to the queue.", namespace, ip_address)
_queue.put(ip_address)
except EOFError:
pass
_queue = eventlet.Queue()
try:
cache_devices = {}
with privileged.get_iproute(namespace) as ip:
for device in ip.get_links():
cache_devices[device['index']] = linux_utils.get_attr(
device, 'IFLA_IFNAME')
_ip = privileged.get_iproute(namespace)
ip_updates_thread = threading.Thread(target=read_ip_updates,
args=(_ip, _queue))
ip_updates_thread.start()
event_started.set()
while not event_stop.is_set():
try:
ip_address = _queue.get(timeout=1)
LOG.debug("IP monitor %s; IP address to process: %s",
namespace, ip_address)
except eventlet.queue.Empty:
continue
if 'index' in ip_address and 'prefixlen' in ip_address:
index = ip_address['index']
name = (get_device_name(index) or
cache_devices.get(index))
if not name:
continue
LOG.debug("IP monitor %s; Queueing IP address: %s; device: %s",
namespace, ip_address, name)
cache_devices[index] = name
queue.put(_parse_ip_address(ip_address, name))
_ip.close()
ip_updates_thread.join(timeout=5)
except OSError as e:
if e.errno == errno.ENOENT:
raise privileged.NetworkNamespaceNotFound(netns_name=namespace)
raise
def add_ip_route(namespace, cidr, device=None, via=None, table=None,
metric=None, scope=None, proto='static', **kwargs):
"""Add an IP route"""
if table:
table = IP_RULE_TABLES.get(table, table)
ip_version = common_utils.get_ip_version(cidr or via)
privileged.add_ip_route(namespace, cidr, ip_version,
device=device, via=via, table=table,
metric=metric, scope=scope, proto=proto, **kwargs)
def list_ip_routes(namespace, ip_version, scope=None, via=None, table=None,
device=None, **kwargs):
"""List IP routes"""
def get_device(index, devices):
for device in (d for d in devices if d['index'] == index):
return linux_utils.get_attr(device, 'IFLA_IFNAME')
def get_proto(proto_number):
if isinstance(proto_number, int) and proto_number in rtnl.rt_proto:
return rtnl.rt_proto[proto_number]
elif isinstance(proto_number, str) and proto_number.isnumeric():
return rtnl.rt_proto[int(proto_number)]
elif str(proto_number) in constants.IP_PROTOCOL_NUM_TO_NAME_MAP:
return constants.IP_PROTOCOL_NUM_TO_NAME_MAP[str(proto_number)]
table = table if table else 'main'
table = IP_RULE_TABLES.get(table, table)
routes = privileged.list_ip_routes(namespace, ip_version, device=device,
table=table, **kwargs)
devices = privileged.get_link_devices(namespace)
ret = []
for route in routes:
cidr = linux_utils.get_attr(route, 'RTA_DST')
if cidr:
cidr = '%s/%s' % (cidr, route['dst_len'])
else:
cidr = constants.IP_ANY[ip_version]
table = int(linux_utils.get_attr(route, 'RTA_TABLE'))
metric = (linux_utils.get_attr(route, 'RTA_PRIORITY') or
IP_ROUTE_METRIC_DEFAULT[ip_version])
proto = get_proto(route['proto'])
value = {
'table': IP_RULE_TABLES_NAMES.get(table, table),
'source_prefix': linux_utils.get_attr(route, 'RTA_PREFSRC'),
'cidr': cidr,
'scope': IP_ADDRESS_SCOPE[int(route['scope'])],
'metric': metric,
'proto': proto,
}
multipath = linux_utils.get_attr(route, 'RTA_MULTIPATH')
if multipath:
value['device'] = None
mp_via = []
for mp in multipath:
mp_via.append({'device': get_device(int(mp['oif']), devices),
'via': linux_utils.get_attr(mp, 'RTA_GATEWAY'),
'weight': int(mp['hops']) + 1})
value['via'] = mp_via
else:
value['device'] = get_device(
int(linux_utils.get_attr(route, 'RTA_OIF')),
devices)
value['via'] = linux_utils.get_attr(route, 'RTA_GATEWAY')
ret.append(value)
if scope:
ret = [route for route in ret if route['scope'] == scope]
if via:
ret = [route for route in ret if route['via'] == via]
return ret
def delete_ip_route(namespace, cidr, device=None, via=None, table=None,
scope=None, **kwargs):
"""Delete an IP route"""
if table:
table = IP_RULE_TABLES.get(table, table)
ip_version = common_utils.get_ip_version(cidr or via)
privileged.delete_ip_route(namespace, cidr, ip_version,
device=device, via=via, table=table,
scope=scope, **kwargs)
View Git Blame Copy Permalink