neutron/doc/source/admin/shared/deploy-ha-vrrp-verifynetworkoperation.txt
tianhui e1943d9711 Fix ADMIN output examples
Update the response of openstack server list

Change-Id: I08b1476b07c4623982f3faef972f89bc7c51a1f3
2018-10-08 06:11:20 +00:00

154 lines
7.5 KiB
Plaintext

#. Source the administrative project credentials.
#. Verify creation of the internal high-availability network that handles
VRRP *heartbeat* traffic.
.. code-block:: console
$ openstack network list
+--------------------------------------+----------------------------------------------------+--------------------------------------+
| ID | Name | Subnets |
+--------------------------------------+----------------------------------------------------+--------------------------------------+
| 1b8519c1-59c4-415c-9da2-a67d53c68455 | HA network tenant f986edf55ae945e2bef3cb4bfd589928 | 6843314a-1e76-4cc9-94f5-c64b7a39364a |
+--------------------------------------+----------------------------------------------------+--------------------------------------+
#. On each network node, verify creation of a ``qrouter`` namespace with
the same ID.
Network node 1:
.. code-block:: console
# ip netns
qrouter-b6206312-878e-497c-8ef7-eb384f8add96
Network node 2:
.. code-block:: console
# ip netns
qrouter-b6206312-878e-497c-8ef7-eb384f8add96
.. note::
The namespace for router 1 from :ref:`deploy-lb-selfservice` should
only appear on network node 1 because of creation prior to enabling
VRRP.
#. On each network node, show the IP address of interfaces in the ``qrouter``
namespace. With the exception of the VRRP interface, only one namespace
belonging to the master router instance contains IP addresses on the
interfaces.
Network node 1:
.. code-block:: console
# ip netns exec qrouter-b6206312-878e-497c-8ef7-eb384f8add96 ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ha-eb820380-40@if21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default qlen 1000
link/ether fa:16:3e:78:ba:99 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 169.254.192.1/18 brd 169.254.255.255 scope global ha-eb820380-40
valid_lft forever preferred_lft forever
inet 169.254.0.1/24 scope global ha-eb820380-40
valid_lft forever preferred_lft forever
inet6 fe80::f816:3eff:fe78:ba99/64 scope link
valid_lft forever preferred_lft forever
3: qr-da3504ad-ba@if24: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default qlen 1000
link/ether fa:16:3e:dc:8e:a8 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 198.51.100.1/24 scope global qr-da3504ad-ba
valid_lft forever preferred_lft forever
inet6 fe80::f816:3eff:fedc:8ea8/64 scope link
valid_lft forever preferred_lft forever
4: qr-442e36eb-fc@if27: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default qlen 1000
link/ether fa:16:3e:ee:c8:41 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 fd00:198:51:100::1/64 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::f816:3eff:feee:c841/64 scope link
valid_lft forever preferred_lft forever
5: qg-33fedbc5-43@if28: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether fa:16:3e:03:1a:f6 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 203.0.113.21/24 scope global qg-33fedbc5-43
valid_lft forever preferred_lft forever
inet6 fd00:203:0:113::21/64 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::f816:3eff:fe03:1af6/64 scope link
valid_lft forever preferred_lft forever
Network node 2:
.. code-block:: console
# ip netns exec qrouter-b6206312-878e-497c-8ef7-eb384f8add96 ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ha-7a7ce184-36@if8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default qlen 1000
link/ether fa:16:3e:16:59:84 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 169.254.192.2/18 brd 169.254.255.255 scope global ha-7a7ce184-36
valid_lft forever preferred_lft forever
inet6 fe80::f816:3eff:fe16:5984/64 scope link
valid_lft forever preferred_lft forever
3: qr-da3504ad-ba@if11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default qlen 1000
link/ether fa:16:3e:dc:8e:a8 brd ff:ff:ff:ff:ff:ff link-netnsid 0
4: qr-442e36eb-fc@if14: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default qlen 1000
5: qg-33fedbc5-43@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether fa:16:3e:03:1a:f6 brd ff:ff:ff:ff:ff:ff link-netnsid 0
.. note::
The master router may reside on network node 2.
#. Launch an instance with an interface on the additional self-service network.
For example, a CirrOS image using flavor ID 1.
.. code-block:: console
$ openstack server create --flavor 1 --image cirros --nic net-id=NETWORK_ID selfservice-instance2
Replace ``NETWORK_ID`` with the ID of the additional self-service
network.
#. Determine the IPv4 and IPv6 addresses of the instance.
.. code-block:: console
$ openstack server list
+--------------------------------------+-----------------------+--------+----------------------------------------------------------------+--------+---------+
| ID | Name | Status | Networks | Image | Flavor |
+--------------------------------------+-----------------------+--------+----------------------------------------------------------------+--------+---------+
| bde64b00-77ae-41b9-b19a-cd8e378d9f8b | selfservice-instance2 | ACTIVE | selfservice2=fd00:198:51:100:f816:3eff:fe71:e93e, 198.51.100.4 | cirros | m1.tiny |
+--------------------------------------+-----------------------+--------+----------------------------------------------------------------+--------+---------+
#. Create a floating IPv4 address on the provider network.
.. code-block:: console
$ openstack floating ip create provider1
+-------------+--------------------------------------+
| Field | Value |
+-------------+--------------------------------------+
| fixed_ip | None |
| id | 0174056a-fa56-4403-b1ea-b5151a31191f |
| instance_id | None |
| ip | 203.0.113.17 |
| pool | provider1 |
+-------------+--------------------------------------+
#. Associate the floating IPv4 address with the instance.
.. code-block:: console
$ openstack server add floating ip selfservice-instance2 203.0.113.17
.. note::
This command provides no output.