184 lines
7.1 KiB
INI
184 lines
7.1 KiB
INI
[DEFAULT]
|
||
# User name for NSX controller
|
||
# nsx_user = admin
|
||
|
||
# Password for NSX controller
|
||
# nsx_password = admin
|
||
|
||
# Total time limit for a cluster request
|
||
# (including retries across different controllers)
|
||
# req_timeout = 30
|
||
|
||
# Time before aborting a request on an unresponsive controller
|
||
# http_timeout = 10
|
||
|
||
# Maximum number of times a particular request should be retried
|
||
# retries = 2
|
||
|
||
# Maximum number of times a redirect response should be followed
|
||
# redirects = 2
|
||
|
||
# Comma-separated list of NSX controller endpoints (<ip>:<port>). When port
|
||
# is omitted, 443 is assumed. This option MUST be specified, e.g.:
|
||
# nsx_controllers = xx.yy.zz.ww:443, aa.bb.cc.dd, ee.ff.gg.hh.ee:80
|
||
|
||
# UUID of the pre-existing default NSX Transport zone to be used for creating
|
||
# tunneled isolated "Neutron" networks. This option MUST be specified, e.g.:
|
||
# default_tz_uuid = 1e8e52cf-fa7f-46b0-a14a-f99835a9cb53
|
||
|
||
# (Optional) UUID for the default l3 gateway service to use with this cluster.
|
||
# To be specified if planning to use logical routers with external gateways.
|
||
# default_l3_gw_service_uuid =
|
||
|
||
# (Optional) UUID for the default l2 gateway service to use with this cluster.
|
||
# To be specified for providing a predefined gateway tenant for connecting their networks.
|
||
# default_l2_gw_service_uuid =
|
||
|
||
# (Optional) UUID for the default service cluster. A service cluster is introduced to
|
||
# represent a group of gateways and it is needed in order to use Logical Services like
|
||
# dhcp and metadata in the logical space. NOTE: If agent_mode is set to 'agentless' this
|
||
# config parameter *MUST BE* set to a valid pre-existent service cluster uuid.
|
||
# default_service_cluster_uuid =
|
||
|
||
# Name of the default interface name to be used on network-gateway. This value
|
||
# will be used for any device associated with a network gateway for which an
|
||
# interface name was not specified
|
||
# default_interface_name = breth0
|
||
|
||
[quotas]
|
||
# number of network gateways allowed per tenant, -1 means unlimited
|
||
# quota_network_gateway = 5
|
||
|
||
[vcns]
|
||
# URL for VCNS manager
|
||
# manager_uri = https://management_ip
|
||
|
||
# User name for VCNS manager
|
||
# user = admin
|
||
|
||
# Password for VCNS manager
|
||
# password = default
|
||
|
||
# (Optional) Datacenter ID for Edge deployment
|
||
# datacenter_moid =
|
||
|
||
# (Optional) Deployment Container ID for NSX Edge deployment
|
||
# If not specified, either a default global container will be used, or
|
||
# the resource pool and datastore specified below will be used
|
||
# deployment_container_id =
|
||
|
||
# (Optional) Resource pool ID for NSX Edge deployment
|
||
# resource_pool_id =
|
||
|
||
# (Optional) Datastore ID for NSX Edge deployment
|
||
# datastore_id =
|
||
|
||
# (Required) UUID of logic switch for physical network connectivity
|
||
# external_network =
|
||
|
||
# (Optional) Asynchronous task status check interval
|
||
# default is 2000 (millisecond)
|
||
# task_status_check_interval = 2000
|
||
|
||
[nsx]
|
||
# Maximum number of ports for each bridged logical switch
|
||
# The recommended value for this parameter varies with NSX version
|
||
# Please use:
|
||
# NSX 2.x -> 64
|
||
# NSX 3.0, 3.1 -> 5000
|
||
# NSX 3.2 -> 10000
|
||
# max_lp_per_bridged_ls = 5000
|
||
|
||
# Maximum number of ports for each overlay (stt, gre) logical switch
|
||
# max_lp_per_overlay_ls = 256
|
||
|
||
# Number of connections to each controller node.
|
||
# default is 10
|
||
# concurrent_connections = 10
|
||
|
||
# Number of seconds a generation id should be valid for (default -1 meaning do not time out)
|
||
# nsx_gen_timeout = -1
|
||
|
||
# Acceptable values for 'metadata_mode' are:
|
||
# - 'access_network': this enables a dedicated connection to the metadata
|
||
# proxy for metadata server access via Neutron router.
|
||
# - 'dhcp_host_route': this enables host route injection via the dhcp agent.
|
||
# This option is only useful if running on a host that does not support
|
||
# namespaces otherwise access_network should be used.
|
||
# metadata_mode = access_network
|
||
|
||
# The default network transport type to use (stt, gre, bridge, ipsec_gre, or ipsec_stt)
|
||
# default_transport_type = stt
|
||
|
||
# Specifies in which mode the plugin needs to operate in order to provide DHCP and
|
||
# metadata proxy services to tenant instances. If 'agent' is chosen (default)
|
||
# the NSX plugin relies on external RPC agents (i.e. dhcp and metadata agents) to
|
||
# provide such services. In this mode, the plugin supports API extensions 'agent'
|
||
# and 'dhcp_agent_scheduler'. If 'agentless' is chosen (experimental in Havana),
|
||
# the plugin will use NSX logical services for DHCP and metadata proxy. This
|
||
# simplifies the deployment model for Neutron, in that the plugin no longer requires
|
||
# the RPC agents to operate. When 'agentless' is chosen, the config option metadata_mode
|
||
# becomes ineffective. The mode 'agentless' is not supported for NSX 4.0 or below.
|
||
# agent_mode = agent
|
||
|
||
[nsx_sync]
|
||
# Interval in seconds between runs of the status synchronization task.
|
||
# The plugin will aim at resynchronizing operational status for all
|
||
# resources in this interval, and it should be therefore large enough
|
||
# to ensure the task is feasible. Otherwise the plugin will be
|
||
# constantly synchronizing resource status, ie: a new task is started
|
||
# as soon as the previous is completed.
|
||
# If this value is set to 0, the state synchronization thread for this
|
||
# Neutron instance will be disabled.
|
||
# state_sync_interval = 120
|
||
|
||
# Random additional delay between two runs of the state synchronization task.
|
||
# An additional wait time between 0 and max_random_sync_delay seconds
|
||
# will be added on top of state_sync_interval.
|
||
# max_random_sync_delay = 0
|
||
|
||
# Minimum delay, in seconds, between two status synchronization requests for NSX.
|
||
# Depending on chunk size, controller load, and other factors, state
|
||
# synchronization requests might be pretty heavy. This means the
|
||
# controller might take time to respond, and its load might be quite
|
||
# increased by them. This parameter allows to specify a minimum
|
||
# interval between two subsequent requests.
|
||
# The value for this parameter must never exceed state_sync_interval.
|
||
# If this does, an error will be raised at startup.
|
||
# min_sync_req_delay = 10
|
||
|
||
# Minimum number of resources to be retrieved from NSX in a single status
|
||
# synchronization request.
|
||
# The actual size of the chunk will increase if the number of resources is such
|
||
# that using the minimum chunk size will cause the interval between two
|
||
# requests to be less than min_sync_req_delay
|
||
# min_chunk_size = 500
|
||
|
||
# Enable this option to allow punctual state synchronization on show
|
||
# operations. In this way, show operations will always fetch the operational
|
||
# status of the resource from the NSX backend, and this might have
|
||
# a considerable impact on overall performance.
|
||
# always_read_status = False
|
||
|
||
[nsx_dhcp]
|
||
# (Optional) Comma separated list of additional dns servers. Default is an empty list
|
||
# extra_domain_name_servers =
|
||
|
||
# Domain to use for building the hostnames
|
||
# domain_name = openstacklocal
|
||
|
||
# Default DHCP lease time
|
||
# default_lease_time = 43200
|
||
|
||
[nsx_metadata]
|
||
# IP address used by Metadata server
|
||
# metadata_server_address = 127.0.0.1
|
||
|
||
# TCP Port used by Metadata server
|
||
# metadata_server_port = 8775
|
||
|
||
# When proxying metadata requests, Neutron signs the Instance-ID header with a
|
||
# shared secret to prevent spoofing. You may select any string for a secret,
|
||
# but it MUST match with the configuration used by the Metadata server
|
||
# metadata_shared_secret =
|