neutron/doc/source/install/environment-networking-compute-rdo.rst

Compute node

Configure network interfaces

1. Configure the first interface as the management interface:

   IP address: 10.0.0.31

   Network mask: 255.255.255.0 (or /24)

   Default gateway: 10.0.0.1

   Note

   Additional compute nodes should use 10.0.0.32, 10.0.0.33, and so on.

2. The provider interface uses a special configuration without an IP address assigned to it. Configure the second interface as the provider interface:

   Replace INTERFACE_NAME with the actual interface name. For example, eth1 or ens224.

• Edit the /etc/sysconfig/network-scripts/ifcfg-INTERFACE_NAME file to contain the following:

  Do not change the HWADDR and UUID keys.

  DEVICE=INTERFACE_NAME
  TYPE=Ethernet
  ONBOOT="yes"
  BOOTPROTO="none"

1. Reboot the system to activate the changes.

Configure name resolution

1. Set the hostname of the node to compute1.