OpenStack Networking (Neutron)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
neutron/neutron/plugins/ml2/drivers/brocade/nos/nctemplates.py

433 lines
15 KiB

# Copyright (c) 2014 Brocade Communications Systems, Inc.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
"""NOS NETCONF XML Configuration Command Templates.
Interface Configuration Commands
"""
# Get NOS Version
SHOW_FIRMWARE_VERSION = (
"show-firmware-version xmlns:nc="
"'urn:brocade.com:mgmt:brocade-firmware-ext'"
)
GET_VCS_DETAILS = (
'get-vcs-details xmlns:nc="urn:brocade.com:mgmt:brocade-vcs"'
)
SHOW_VIRTUAL_FABRIC = (
'show-virtual-fabric xmlns:nc="urn:brocade.com:mgmt:brocade-vcs"'
)
GET_VIRTUAL_FABRIC_INFO = (
'interface xmlns:nc="urn:brocade.com:mgmt:brocade-firmware-ext"'
)
NOS_VERSION = "./*/{urn:brocade.com:mgmt:brocade-firmware-ext}os-version"
VFAB_ENABLE = "./*/*/*/{urn:brocade.com:mgmt:brocade-vcs}vfab-enable"
# Create VLAN (vlan_id)
CREATE_VLAN_INTERFACE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<interface-vlan xmlns="urn:brocade.com:mgmt:brocade-interface">
<interface>
<vlan>
<name>{vlan_id}</name>
</vlan>
</interface>
</interface-vlan>
</config>
"""
# Delete VLAN (vlan_id)
DELETE_VLAN_INTERFACE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<interface-vlan xmlns="urn:brocade.com:mgmt:brocade-interface">
<interface>
<vlan operation="delete">
<name>{vlan_id}</name>
</vlan>
</interface>
</interface-vlan>
</config>
"""
#
# AMPP Life-cycle Management Configuration Commands
#
# Create AMPP port-profile (port_profile_name)
CREATE_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
</port-profile>
</config>
"""
# Create VLAN sub-profile for port-profile (port_profile_name)
CREATE_VLAN_PROFILE_FOR_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile/>
</port-profile>
</config>
"""
# Configure L2 mode for VLAN sub-profile (port_profile_name)
CONFIGURE_L2_MODE_FOR_VLAN_PROFILE_IN_DOMAIN = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile>
<switchport-basic>
<basic/>
</switchport-basic>
</vlan-profile>
</port-profile>
</config>
"""
# Configure L2 mode for VLAN sub-profile (port_profile_name)
CONFIGURE_L2_MODE_FOR_VLAN_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile>
<switchport/>
</vlan-profile>
</port-profile>
</config>
"""
# Configure trunk mode for VLAN sub-profile (port_profile_name)
CONFIGURE_TRUNK_MODE_FOR_VLAN_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile>
<switchport>
<mode>
<vlan-mode>trunk</vlan-mode>
</mode>
</switchport>
</vlan-profile>
</port-profile>
</config>
"""
# Configure allowed VLANs for VLAN sub-profile
# (port_profile_name, allowed_vlan, native_vlan)
CONFIGURE_ALLOWED_VLANS_FOR_VLAN_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile>
<switchport>
<trunk>
<allowed>
<vlan>
<add>{vlan_id}</add>
</vlan>
</allowed>
</trunk>
</switchport>
</vlan-profile>
</port-profile>
</config>
"""
# Delete port-profile (port_profile_name)
DELETE_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile
xmlns="urn:brocade.com:mgmt:brocade-port-profile" operation="delete">
<name>{name}</name>
</port-profile>
</config>
"""
# Activate port-profile (port_profile_name)
ACTIVATE_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-global xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile>
<name>{name}</name>
<activate/>
</port-profile>
</port-profile-global>
</config>
"""
# Deactivate port-profile (port_profile_name)
DEACTIVATE_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-global xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile>
<name>{name}</name>
<activate
xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="delete" />
</port-profile>
</port-profile-global>
</config>
"""
# Associate MAC address to port-profile (port_profile_name, mac_address)
ASSOCIATE_MAC_TO_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-global xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile>
<name>{name}</name>
<static>
<mac-address>{mac_address}</mac-address>
</static>
</port-profile>
</port-profile-global>
</config>
"""
# Dissociate MAC address from port-profile (port_profile_name, mac_address)
DISSOCIATE_MAC_FROM_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-global xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile>
<name>{name}</name>
<static
xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="delete">
<mac-address>{mac_address}</mac-address>
</static>
</port-profile>
</port-profile-global>
</config>
"""
# port-profile domain management commands
REMOVE_PORTPROFILE_FROM_DOMAIN = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-domain xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile-domain-name>{domain_name}</port-profile-domain-name>
<profile operation="delete">
<profile-name>{name}</profile-name>
</profile>
</port-profile-domain>
</config>
"""
# put port profile in default domain
CONFIGURE_PORTPROFILE_IN_DOMAIN = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-domain xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile-domain-name>{domain_name}</port-profile-domain-name>
<profile>
<profile-name>{name}</profile-name>
</profile>
</port-profile-domain>
</config>
"""
#
# L3 Life-cycle Management Configuration Commands
#
# Create SVI and assign ippaddres (rbridge_id,vlan_id,ip_address)
CONFIGURE_SVI_WITH_IP_ADDRESS = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<ve>
<name>{vlan_id}</name>
<ip xmlns="urn:brocade.com:mgmt:brocade-ip-config">
<ip-config>
<address>
<address>{ip_address}</address>
</address>
</ip-config>
</ip>
</ve>
</interface>
</rbridge-id>
</config>
"""
# delete SVI (rbridge_id,vlan_id)
DELETE_SVI = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<ve operation="delete">
<name>{vlan_id}</name>
</ve>
</interface>
</rbridge-id>
</config>
"""
# Activate SVI (rbridge_id,vlan_id)
ACTIVATE_SVI = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<ve>
<name>{vlan_id}</name>
<shutdown xmlns="urn:brocade.com:mgmt:brocade-ip-config"
xc:operation="delete"></shutdown>
</ve>
</interface>
</rbridge-id>
</config>
"""
# Remove ipaddress from SVI (rbridge_id,vlan_id)
DECONFIGURE_IP_FROM_SVI = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<ve>
<name>{vlan_id}</name>
<ip xmlns="urn:brocade.com:mgmt:brocade-ip-config">
<ip-config>
<address xc:operation="delete">
<address>{gw_ip}</address>
</address>
</ip-config>
</ip>
</ve>
</interface>
</rbridge-id>
</config>
"""
# create vrf (rbridge_id,vrf_name)
CREATE_VRF = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<vrf xmlns="urn:brocade.com:mgmt:brocade-vrf">
<vrf-name>{vrf_name}</vrf-name>
</vrf>
</rbridge-id>
</config>
"""
# delete vrf (rbridge_id,vrf_name)
DELETE_VRF = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<vrf xmlns="urn:brocade.com:mgmt:brocade-vrf"
xc:operation="delete">
<vrf-name>{vrf_name}</vrf-name>
</vrf>
</rbridge-id>
</config>
"""
# configure route distinguisher for vrf (rbridge_id,vrf_name, rd)
CONFIGURE_RD_FOR_VRF = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<vrf xmlns="urn:brocade.com:mgmt:brocade-vrf">
<vrf-name>{vrf_name}</vrf-name>
<route-distiniguisher>{rd}</route-distiniguisher>
</vrf>
</rbridge-id>
</config>
"""
# configure address-family for vrf (rbridge_id,vrf_name)
ADD_ADDRESS_FAMILY_FOR_VRF_V1 = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<vrf xmlns="urn:brocade.com:mgmt:brocade-vrf">
<vrf-name>{vrf_name}</vrf-name>
<address-family xmlns="urn:brocade.com:mgmt:brocade-vrf">
<ipv4>
<max-route>1200</max-route>
</ipv4>
</address-family>
</vrf>
</rbridge-id>
</config>
"""
# configure address-family for vrf (rbridge_id,vrf_name)
ADD_ADDRESS_FAMILY_FOR_VRF = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<vrf xmlns="urn:brocade.com:mgmt:brocade-vrf">
<vrf-name>{vrf_name}</vrf-name>
<address-family xmlns="urn:brocade.com:mgmt:brocade-vrf">
<ip>
<unicast/>
</ip>
</address-family>
</vrf>
</rbridge-id>
</config>
"""
# Bind vrf to SVI (rbridge_id,vlan_idi, vrf)
ADD_VRF_TO_SVI = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<ve>
<name>{vlan_id}</name>
<vrf xmlns="urn:brocade.com:mgmt:brocade-ip-config">
<forwarding>{vrf_name}</forwarding>
</vrf>
</ve>
</interface>
</rbridge-id>
</config>
"""
# unbind vrf from SVI (rbridge_id,vlan_idi, vrf)
DELETE_VRF_FROM_SVI = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">
<rbridge-id>{rbridge_id}</rbridge-id>
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<ve>
<name>{vlan_id}</name>
<vrf xmlns="urn:brocade.com:mgmt:brocade-ip-config"
operation="delete">
<forwarding>{vrf_name}</forwarding>
</vrf>
</ve>
</interface>
</rbridge-id>
</config>
"""
#
# Constants
#
# Port profile naming convention for Neutron networks
OS_PORT_PROFILE_NAME = "openstack-profile-{id}"
OS_VRF_NAME = "osv-{id}"
# Port profile filter expressions
PORT_PROFILE_XPATH_FILTER = "/port-profile"
PORT_PROFILE_NAME_XPATH_FILTER = "/port-profile[name='{name}']"