96 lines
4.2 KiB
Plaintext
96 lines
4.2 KiB
Plaintext
Similar to the self-service deployment example, this configuration supports
|
|
multiple VXLAN self-service networks. After enabling high-availability, all
|
|
additional routers use VRRP. The following procedure creates an additional
|
|
self-service network and router. The Networking service also supports adding
|
|
high-availability to existing routers. However, the procedure requires
|
|
administratively disabling and enabling each router which temporarily
|
|
interrupts network connectivity for self-service networks with interfaces
|
|
on that router.
|
|
|
|
#. Source a regular (non-administrative) project credentials.
|
|
#. Create a self-service network.
|
|
|
|
.. code-block:: console
|
|
|
|
$ openstack network create selfservice2
|
|
+-------------------------+--------------+
|
|
| Field | Value |
|
|
+-------------------------+--------------+
|
|
| admin_state_up | UP |
|
|
| mtu | 1450 |
|
|
| name | selfservice2 |
|
|
| port_security_enabled | True |
|
|
| router:external | Internal |
|
|
| shared | False |
|
|
| status | ACTIVE |
|
|
+-------------------------+--------------+
|
|
|
|
#. Create a IPv4 subnet on the self-service network.
|
|
|
|
.. code-block:: console
|
|
|
|
$ openstack subnet create --subnet-range 198.51.100.0/24 \
|
|
--network selfservice2 --dns-nameserver 8.8.4.4 selfservice2-v4
|
|
+-------------------+------------------------------+
|
|
| Field | Value |
|
|
+-------------------+------------------------------+
|
|
| allocation_pools | 198.51.100.2-198.51.100.254 |
|
|
| cidr | 198.51.100.0/24 |
|
|
| dns_nameservers | 8.8.4.4 |
|
|
| enable_dhcp | True |
|
|
| gateway_ip | 198.51.100.1 |
|
|
| ip_version | 4 |
|
|
| name | selfservice2-v4 |
|
|
+-------------------+------------------------------+
|
|
|
|
#. Create a IPv6 subnet on the self-service network.
|
|
|
|
.. code-block:: console
|
|
|
|
$ openstack subnet create --subnet-range fd00:198:51:100::/64 --ip-version 6 \
|
|
--ipv6-ra-mode slaac --ipv6-address-mode slaac --network selfservice2 \
|
|
--dns-nameserver 2001:4860:4860::8844 selfservice2-v6
|
|
+-------------------+--------------------------------------------------------+
|
|
| Field | Value |
|
|
+-------------------+--------------------------------------------------------+
|
|
| allocation_pools | fd00:198:51:100::2-fd00:198:51:100:ffff:ffff:ffff:ffff |
|
|
| cidr | fd00:198:51:100::/64 |
|
|
| dns_nameservers | 2001:4860:4860::8844 |
|
|
| enable_dhcp | True |
|
|
| gateway_ip | fd00:198:51:100::1 |
|
|
| ip_version | 6 |
|
|
| ipv6_address_mode | slaac |
|
|
| ipv6_ra_mode | slaac |
|
|
| name | selfservice2-v6 |
|
|
+-------------------+--------------------------------------------------------+
|
|
|
|
#. Create a router.
|
|
|
|
.. code-block:: console
|
|
|
|
$ openstack router create router2
|
|
+-----------------------+---------+
|
|
| Field | Value |
|
|
+-----------------------+---------+
|
|
| admin_state_up | UP |
|
|
| name | router2 |
|
|
| status | ACTIVE |
|
|
+-----------------------+---------+
|
|
|
|
#. Add the IPv4 and IPv6 subnets as interfaces on the router.
|
|
|
|
.. code-block:: console
|
|
|
|
$ openstack router add subnet router2 selfservice2-v4
|
|
$ openstack router add subnet router2 selfservice2-v6
|
|
|
|
.. note::
|
|
|
|
These commands provide no output.
|
|
|
|
#. Add the provider network as a gateway on the router.
|
|
|
|
.. code-block:: console
|
|
|
|
$ openstack router set --external-gateway provider1 router2
|