openstack/nova
Code Issues Proposed changes
f178d0d4b8
nova/doc/source/support-matrix.ini
Eric Berglund 0fbb97f3c3 Add PowerVM to nova support matrix 
Base PowerVM support has been added to nova [1-7]. This updates the
support matrix to include PowerVM features.

[1] https://review.openstack.org/#/c/438119/
[2] https://review.openstack.org/#/c/438598/
[3] https://review.openstack.org/#/c/438729/
[4] https://review.openstack.org/#/c/427380/
[5] https://review.openstack.org/#/c/391288/
[6] https://review.openstack.org/#/c/409402/
[7] https://review.openstack.org/#/c/443189/

Closes-Bug: #1693083
Partially-Implements: blueprint powervm-nova-compute-driver

Change-Id: I0583400b546d3cb32f2fe828711df8272c5ab5af
2017-06-15 09:38:36 -04:00

1206 lines
45 KiB
INI
Raw Blame History

# Copyright (C) 2014 Red Hat, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
#
#
# =========================================
# Nova Hypervisor Feature Capability Matrix
# =========================================
#
# This obsoletes the information previously at
#
# https://wiki.openstack.org/wiki/HypervisorSupportMatrix
#
# This file contains a specification of what feature capabilities each
# hypervisor driver in Nova is able to support. Feature capabilities include
# what API operations are supported, what storage / networking features can be
# used and what aspects of the guest machine can be configured. The capabilities
# can be considered to be structured into nested groups, but in this file they
# have been flattened for ease of representation. The section names represent
# the group structure. At the top level there are the following groups defined
#
# - operation - public API operations
# - storage - host storage configuration options
# - networking - host networking configuration options
# - guest - guest hardware configuration options
#
# When considering which capabilities should be marked as mandatory,
# consider the general guiding principles listed in the support-matrix.rst
# file
#
# The 'status' field takes possible values
#
# - mandatory - unconditionally required to be implemented
# - optional - optional to support, nice to have
# - choice(group) - at least one of the options within the named group
# must be implemented
# - conditional(cond) - required, if the referenced condition is met.
#
# The value against each 'driver-impl-XXXX' entry refers to the level
# of the implementation of the feature in that driver
#
# - complete - fully implemented, expected to work at all times
# - partial - implemented, but with caveats about when it will work
# eg some configurations or hardware or guest OS may not
# support it
# - missing - not implemented at all
#
# In the case of the driver being marked as 'partial', then
# 'driver-notes-XXX' entry should be used to explain the caveats
# around the implementation.
#
# The 'cli' field takes a list of nova client commands, separated by semicolon.
# These CLi commands are related to that feature.
# Example:
# cli=nova list;nova show <server>
#
[targets]
# List of driver impls we are going to record info for later
# This list only covers drivers that are in the Nova source
# tree. Out of tree drivers should maintain their own equivalent
# document, and merge it with this when their code merges into
# Nova core.
driver-impl-xenserver=XenServer
driver-impl-libvirt-kvm-x86=Libvirt KVM (x86)
driver-impl-libvirt-kvm-ppc64=Libvirt KVM (ppc64)
driver-impl-libvirt-kvm-s390x=Libvirt KVM (s390x)
driver-impl-libvirt-qemu-x86=Libvirt QEMU (x86)
driver-impl-libvirt-lxc=Libvirt LXC
driver-impl-libvirt-xen=Libvirt Xen
driver-impl-libvirt-vz-vm=Libvirt Virtuozzo VM
driver-impl-libvirt-vz-ct=Libvirt Virtuozzo CT
driver-impl-vmware=VMware vCenter
driver-impl-hyperv=Hyper-V
driver-impl-ironic=Ironic
driver-impl-powervm=PowerVM
[operation.attach-volume]
title=Attach block volume to instance
status=optional
notes=The attach volume operation provides a means to hotplug
additional block storage to a running instance. This allows
storage capabilities to be expanded without interruption of
service. In a cloud model it would be more typical to just
spin up a new instance with large storage, so the ability to
hotplug extra storage is for those cases where the instance
is considered to be more of a pet than cattle. Therefore
this operation is not considered to be mandatory to support.
cli=nova volume-attach <server> <volume>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[operation.detach-volume]
title=Detach block volume from instance
status=optional
notes=See notes for attach volume operation.
cli=nova volume-detach <server> <volume>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[operation.attach-interface]
title=Attach virtual network interface to instance
status=optional
notes=The attach interface operation provides a means to hotplug
additional interfaces to a running instance. Hotplug support
varies between guest OSes and some guests require a reboot for
new interfaces to be detected. This operation allows interface
capabilities to be expanded without interruption of service.
In a cloud model it would be more typical to just spin up a
new instance with more interfaces.
cli=nova interface-attach <server>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=partial
driver-notes-hyperv=Works without issue if instance is off. When
hotplugging, only works if using Windows/Hyper-V Server 2016 and
the instance is a Generation 2 VM.
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[operation.detach-interface]
title=Detach virtual network interface from instance
status=optional
notes=See notes for attach-interface operation.
cli=nova interface-detach <server> <port_id>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-notes-hyperv=Works without issue if instance is off. When
hotplugging, only works if using Windows/Hyper-V Server 2016 and
the instance is a Generation 2 VM.
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[operation.maintenance-mode]
title=Set the host in a maintenance mode
status=optional
notes=This operation allows a host to be placed into maintenance
mode, automatically triggering migration of any running
instances to an alternative host and preventing new
instances from being launched. This is not considered
to be a mandatory operation to support.
The driver methods to implement are "host_maintenance_mode" and
"set_host_enabled".
cli=nova host-update <host>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=missing
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=missing
driver-impl-libvirt-qemu-x86=missing
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[operation.evacuate]
title=Evacuate instances from a host
status=optional
notes=A possible failure scenario in a cloud environment is the outage
of one of the compute nodes. In such a case the instances of the down
host can be evacuated to another host. It is assumed that the old host
is unlikely ever to be powered back on, otherwise the evacuation
attempt will be rejected. When the instances get moved to the new
host, their volumes get re-attached and the locally stored data is
dropped. That happens in the same way as a rebuild.
This is not considered to be a mandatory operation to support.
cli=nova evacuate <server>;nova host-evacuate <host>
driver-impl-xenserver=unknown
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=unknown
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=unknown
driver-impl-libvirt-lxc=unknown
driver-impl-libvirt-xen=unknown
driver-impl-vmware=unknown
driver-impl-hyperv=unknown
driver-impl-ironic=unknown
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=unknown
[operation.rebuild]
title=Rebuild instance
status=optional
notes=A possible use case is additional attributes need to be set
to the instance, nova will purge all existing data from the system
and remakes the VM with given information such as 'metadata' and
'personalities'. Though this is not considered to be a mandatory
operation to support.
cli=nova rebuild <server> <image>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=unknown
[operation.get-guest-info]
title=Guest instance status
status=mandatory
notes=Provides a quick report on information about the guest instance,
including the power state, memory allocation, CPU allocation, number
of vCPUs and cumulative CPU execution time. As well as being
informational, the power state is used by the compute manager for
tracking changes in guests. Therefore this operation is considered
mandatory to support.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=complete
[operation.get-host-info]
title=Guest host status
status=optional
notes=Unclear what this refers to
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=complete
[operation.live-migrate]
title=Live migrate instance across hosts
status=optional
notes=Live migration provides a way to move an instance off one
compute host, to another compute host. Administrators may use
this to evacuate instances from a host that needs to undergo
maintenance tasks, though of course this may not help if the
host is already suffering a failure. In general instances are
considered cattle rather than pets, so it is expected that an
instance is liable to be killed if host maintenance is required.
It is technically challenging for some hypervisors to provide
support for the live migration operation, particularly those
built on the container based virtualization. Therefore this
operation is not considered mandatory to support.
cli=nova live-migration <server>;nova host-evacuate-live <host>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=missing
driver-notes-vmware=https://bugs.launchpad.net/nova/+bug/1192192
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[operation.force-live-migration-to-complete]
title=Force live migration to complete
status=optional
notes=Live migration provides a way to move a running instance to another
compute host. But it can sometimes fail to complete if an instance has
a high rate of memory or disk page access.
This operation provides the user with an option to assist the progress
of the live migration. The mechanism used to complete the live
migration depends on the underlying virtualization subsystem
capabilities. If libvirt/qemu is used and the post-copy feature is
available and enabled then the force complete operation will cause
a switch to post-copy mode. Otherwise the instance will be suspended
until the migration is completed or aborted.
cli=nova live-migration-force-complete <server> <migration>
driver-impl-xenserver=missing
driver-impl-libvirt-kvm-x86=complete
driver-notes-libvirt-kvm-x86=Requires libvirt>=1.3.3, qemu>=2.5.0
driver-impl-libvirt-kvm-ppc64=complete
driver-notes-libvirt-kvm-ppc64=Requires libvirt>=1.3.3, qemu>=2.5.0
driver-impl-libvirt-kvm-s390x=complete
driver-notes-libvirt-kvm-s390x=Requires libvirt>=1.3.3, qemu>=2.5.0
driver-impl-libvirt-qemu-x86=complete
driver-notes-libvirt-qemu-x86=Requires libvirt>=1.3.3, qemu>=2.5.0
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[operation.launch]
title=Launch instance
status=mandatory
notes=Importing pre-existing running virtual machines on a host is
considered out of scope of the cloud paradigm. Therefore this
operation is mandatory to support in drivers.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=complete
[operation.pause]
title=Stop instance CPUs (pause)
status=optional
notes=Stopping an instances CPUs can be thought of as roughly
equivalent to suspend-to-RAM. The instance is still present
in memory, but execution has stopped. The problem, however,
is that there is no mechanism to inform the guest OS that
this takes place, so upon unpausing, its clocks will no
longer report correct time. For this reason hypervisor vendors
generally discourage use of this feature and some do not even
implement it. Therefore this operation is considered optional
to support in drivers.
cli=nova pause <server>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=missing
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[operation.reboot]
title=Reboot instance
status=optional
notes=It is reasonable for a guest OS administrator to trigger a
graceful reboot from inside the instance. A host initiated
graceful reboot requires guest co-operation and a non-graceful
reboot can be achieved by a combination of stop+start. Therefore
this operation is considered optional.
cli=nova reboot <server>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=complete
[operation.rescue]
title=Rescue instance
status=optional
notes=The rescue operation starts an instance in a special
configuration whereby it is booted from an special root
disk image. The goal is to allow an administrator to
recover the state of a broken virtual machine. In general
the cloud model considers instances to be cattle, so if
an instance breaks the general expectation is that it be
thrown away and a new instance created. Therefore this
operation is considered optional to support in drivers.
cli=nova rescue <server>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[operation.resize]
title=Resize instance
status=optional
notes=The resize operation allows the user to change a running
instance to match the size of a different flavor from the one
it was initially launched with. There are many different
flavor attributes that potentially need to be updated. In
general it is technically challenging for a hypervisor to
support the alteration of all relevant config settings for a
running instance. Therefore this operation is considered
optional to support in drivers.
cli=nova resize <server> <flavor>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-notes-vz-vm=Resizing Virtuozzo instances implies guest filesystem resize also
driver-impl-libvirt-vz-ct=complete
driver-notes-vz-ct=Resizing Virtuozzo instances implies guest filesystem resize also
driver-impl-powervm=unknown
[operation.resume]
title=Restore instance
status=optional
notes=See notes for the suspend operation
cli=nova resume <server>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[operation.set-admin-password]
title=Set instance admin password
status=optional
notes=Provides a mechanism to (re)set the password of the administrator
account inside the instance operating system. This requires that the
hypervisor has a way to communicate with the running guest operating
system. Given the wide range of operating systems in existence it is
unreasonable to expect this to be practical in the general case. The
configdrive and metadata service both provide a mechanism for setting
the administrator password at initial boot time. In the case where this
operation were not available, the administrator would simply have to
login to the guest and change the password in the normal manner, so
this is just a convenient optimization. Therefore this operation is
not considered mandatory for drivers to support.
cli=nova set-password <server>
driver-impl-xenserver=complete
driver-notes-xenserver=Requires XenAPI agent on the guest.
driver-impl-libvirt-kvm-x86=complete
driver-notes-libvirt-kvm-x86=Requires libvirt>=1.2.16 and hw_qemu_guest_agent.
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=missing
driver-impl-libvirt-qemu-x86=complete
driver-notes-libvirt-qemu-x86=Requires libvirt>=1.2.16 and hw_qemu_guest_agent.
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-notes-libvirt-vz-vm=Requires libvirt>=2.0.0
driver-impl-libvirt-vz-ct=complete
driver-notes-libvirt-vz-ct=Requires libvirt>=2.0.0
driver-impl-powervm=missing
[operation.snapshot]
title=Save snapshot of instance disk
status=optional
notes=The snapshot operation allows the current state of the
instance root disk to be saved and uploaded back into the
glance image repository. The instance can later be booted
again using this saved image. This is in effect making
the ephemeral instance root disk into a semi-persistent
storage, in so much as it is preserved even though the guest
is no longer running. In general though, the expectation is
that the root disks are ephemeral so the ability to take a
snapshot cannot be assumed. Therefore this operation is not
considered mandatory to support.
cli=nova image-create <server> <name>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=partial
driver-notes-libvirt-xen=Only cold snapshots (pause + snapshot) supported
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[operation.suspend]
title=Suspend instance
status=optional
notes=Suspending an instance can be thought of as roughly
equivalent to suspend-to-disk. The instance no longer
consumes any RAM or CPUs, with its live running state
having been preserved in a file on disk. It can later
be restored, at which point it should continue execution
where it left off. As with stopping instance CPUs, it suffers from the fact
that the guest OS will typically be left with a clock that
is no longer telling correct time. For container based
virtualization solutions, this operation is particularly
technically challenging to implement and is an area of
active research. This operation tends to make more sense
when thinking of instances as pets, rather than cattle,
since with cattle it would be simpler to just terminate
the instance instead of suspending. Therefore this operation
is considered optional to support.
cli=nova suspend <server>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[operation.swap-volume]
title=Swap block volumes
status=optional
notes=The swap volume operation is a mechanism for changing a running
instance so that its attached volume(s) are backed by different
storage in the host. An alternative to this would be to simply
terminate the existing instance and spawn a new instance with the
new storage. In other words this operation is primarily targeted towards
the pet use case rather than cattle, however, it is required for volume
migration to work in the volume service. This is considered optional to
support.
cli=nova volume-update <server> <attachment> <volume>
driver-impl-xenserver=missing
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[operation.terminate]
title=Shutdown instance
status=mandatory
notes=The ability to terminate a virtual machine is required in
order for a cloud user to stop utilizing resources and thus
avoid indefinitely ongoing billing. Therefore this operation
is mandatory to support in drivers.
cli=nova delete <server>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-notes-libvirt-lxc=Fails in latest Ubuntu Trusty kernel
from security repository (3.13.0-76-generic), but works in upstream
3.13.x kernels as well as default Ubuntu Trusty latest kernel
(3.13.0-58-generic).
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=complete
[operation.trigger-crash-dump]
title=Trigger crash dump
status=optional
notes=The trigger crash dump operation is a mechanism for triggering
a crash dump in an instance. The feature is typically implemented by
injecting an NMI (Non-maskable Interrupt) into the instance. It provides
a means to dump the production memory image as a dump file which is useful
for users. Therefore this operation is considered optional to support.
cli=
driver-impl-xenserver=missing
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[operation.unpause]
title=Resume instance CPUs (unpause)
status=optional
notes=See notes for the "Stop instance CPUs" operation
cli=nova unpause <server>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=missing
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[guest.disk.autoconfigure.wtf.com]
title=Auto configure disk
status=optional
notes=something something, dark side, something something.
Unclear just what this is about.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=missing
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=missing
driver-impl-libvirt-qemu-x86=missing
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[guest.disk.rate-limit]
title=Instance disk I/O limits
status=optional
notes=The ability to set rate limits on virtual disks allows for
greater performance isolation between instances running on the
same host storage. It is valid to delegate scheduling of I/O
operations to the hypervisor with its default settings, instead
of doing fine grained tuning. Therefore this is not considered
to be an mandatory configuration to support.
cli=nova limits
driver-impl-xenserver=missing
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[guest.setup.configdrive]
title=Config drive support
status=choice(guest.setup)
notes=The config drive provides an information channel into
the guest operating system, to enable configuration of the
administrator password, file injection, registration of
SSH keys, etc. Since cloud images typically ship with all
login methods locked, a mechanism to set the administrator
password or keys is required to get login access. Alternatives
include the metadata service and disk injection. At least one
of the guest setup mechanisms is required to be supported by
drivers, in order to enable login access.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[guest.setup.inject.file]
title=Inject files into disk image
status=optional
notes=This allows for the end user to provide data for multiple
files to be injected into the root filesystem before an instance
is booted. This requires that the compute node understand the
format of the filesystem and any partitioning scheme it might
use on the block device. This is a non-trivial problem considering
the vast number of filesystems in existence. The problem of injecting
files to a guest OS is better solved by obtaining via the metadata
service or config drive. Therefore this operation is considered
optional to support.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=missing
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[guest.setup.inject.networking]
title=Inject guest networking config
status=optional
notes=This allows for static networking configuration (IP
address, netmask, gateway and routes) to be injected directly
into the root filesystem before an instance is booted. This
requires that the compute node understand how networking is
configured in the guest OS which is a non-trivial problem
considering the vast number of operating system types. The
problem of configuring networking is better solved by DHCP
or by obtaining static config via
config drive. Therefore this operation is considered optional
to support.
cli=
driver-impl-xenserver=partial
driver-notes-xenserver=Only for Debian derived guests
driver-impl-libvirt-kvm-x86=partial
driver-notes-libvirt-kvm-x86=Only for Debian derived guests
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=missing
driver-impl-libvirt-qemu-x86=partial
driver-notes-libvirt-qemu-x86=Only for Debian derived guests
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=partial
driver-notes-vmware=requires vmware tools installed
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[console.rdp]
title=Remote desktop over RDP
status=choice(console)
notes=This allows the administrator to interact with the graphical
console of the guest OS via RDP. This provides a way to see boot
up messages and login to the instance when networking configuration
has failed, thus preventing a network based login. Some operating
systems may prefer to emit messages via the serial console for
easier consumption. Therefore support for this operation is not
mandatory, however, a driver is required to support at least one
of the listed console access operations.
cli=nova get-rdp-console <server> <console-type>
driver-impl-xenserver=missing
driver-impl-libvirt-kvm-x86=missing
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=missing
driver-impl-libvirt-qemu-x86=missing
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[console.serial.log]
title=View serial console logs
status=choice(console)
notes=This allows the administrator to query the logs of data
emitted by the guest OS on its virtualized serial port. For
UNIX guests this typically includes all boot up messages and
so is useful for diagnosing problems when an instance fails
to successfully boot. Not all guest operating systems will be
able to emit boot information on a serial console, others may
only support graphical consoles. Therefore support for this
operation is not mandatory, however, a driver is required to
support at least one of the listed console access operations.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=missing
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[console.serial.interactive]
title=Remote interactive serial console
status=choice(console)
notes=This allows the administrator to interact with the serial
console of the guest OS. This provides a way to see boot
up messages and login to the instance when networking configuration
has failed, thus preventing a network based login. Not all guest
operating systems will be able to emit boot information on a serial
console, others may only support graphical consoles. Therefore support
for this operation is not mandatory, however, a driver is required to
support at least one of the listed console access operations.
This feature was introduced in the Juno release with blueprint
https://blueprints.launchpad.net/nova/+spec/serial-ports
cli=nova get-serial-console <server>
driver-impl-xenserver=missing
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=unknown
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=unknown
driver-impl-libvirt-lxc=unknown
driver-impl-libvirt-xen=unknown
driver-impl-vmware=missing
driver-impl-hyperv=complete
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[console.spice]
title=Remote desktop over SPICE
status=choice(console)
notes=This allows the administrator to interact with the graphical
console of the guest OS via SPICE. This provides a way to see boot
up messages and login to the instance when networking configuration
has failed, thus preventing a network based login. Some operating
systems may prefer to emit messages via the serial console for
easier consumption. Therefore support for this operation is not
mandatory, however, a driver is required to support at least one
of the listed console access operations.
cli=nova get-spice-console <server> <console-type>
driver-impl-xenserver=missing
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=missing
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[console.vnc]
title=Remote desktop over VNC
status=choice(console)
notes=This allows the administrator to interact with the graphical
console of the guest OS via VNC. This provides a way to see boot
up messages and login to the instance when networking configuration
has failed, thus preventing a network based login. Some operating
systems may prefer to emit messages via the serial console for
easier consumption. Therefore support for this operation is not
mandatory, however, a driver is required to support at least one
of the listed console access operations.
cli=nova get-vnc-console <server> <console-type>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=missing
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=complete
[storage.block]
title=Block storage support
status=optional
notes=Block storage provides instances with direct attached
virtual disks that can be used for persistent storage of data.
As an alternative to direct attached disks, an instance may
choose to use network based persistent storage. OpenStack provides
object storage via the Swift service, or a traditional filesystem
such as NFS may be used. Some types of instances may
not require persistent storage at all, being simple transaction
processing systems reading requests & sending results to and from
the network. Therefore support for this configuration is not
considered mandatory for drivers to support.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=partial
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[storage.block.backend.fibrechannel]
title=Block storage over fibre channel
status=optional
notes=To maximise performance of the block storage, it may be desirable
to directly access fibre channel LUNs from the underlying storage
technology on the compute hosts. Since this is just a performance
optimization of the I/O path it is not considered mandatory to support.
cli=
driver-impl-xenserver=missing
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=missing
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[storage.block.backend.iscsi]
title=Block storage over iSCSI
status=condition(storage.block==complete)
notes=If the driver wishes to support block storage, it is common to
provide an iSCSI based backend to access the storage from cinder.
This isolates the compute layer for knowledge of the specific storage
technology used by Cinder, albeit at a potential performance cost due
to the longer I/O path involved. If the driver chooses to support
block storage, then this is considered mandatory to support, otherwise
it is considered optional.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[storage.block.backend.iscsi.auth.chap]
title=CHAP authentication for iSCSI
status=optional
notes=If accessing the cinder iSCSI service over an untrusted LAN it
is desirable to be able to enable authentication for the iSCSI
protocol. CHAP is the commonly used authentication protocol for
iSCSI. This is not considered mandatory to support. (?)
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=missing
driver-impl-hyperv=complete
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
[storage.image]
title=Image storage support
status=mandatory
notes=This refers to the ability to boot an instance from an image
stored in the glance image repository. Without this feature it
would not be possible to bootstrap from a clean environment, since
there would be no way to get block volumes populated and reliance
on external PXE servers is out of scope. Therefore this is considered
a mandatory storage feature to support.
cli=nova boot --image <image> <name>
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=complete
[networking.firewallrules]
title=Network firewall rules
status=optional
notes=Unclear how this is different from security groups
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[networking.routing]
title=Network routing
status=optional
notes=Unclear what this refers to
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=missing
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[networking.securitygroups]
title=Network security groups
status=optional
notes=The security groups feature provides a way to define rules
to isolate the network traffic of different instances running
on a compute host. This would prevent actions such as MAC and
IP address spoofing, or the ability to setup rogue DHCP servers.
In a private cloud environment this may be considered to be a
superfluous requirement. Therefore this is considered to be an
optional configuration to support.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=partial
driver-notes-vmware=This is supported by the Neutron NSX plugins
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[networking.topology.flat]
title=Flat networking
status=choice(networking.topology)
notes=Provide network connectivity to guests using a
flat topology across all compute nodes. At least one
of the networking configurations is mandatory to
support in the drivers.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=complete
driver-impl-ironic=complete
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[networking.topology.vlan]
title=VLAN networking
status=choice(networking.topology)
notes=Provide network connectivity to guests using VLANs
to define the topology. At least one of the networking
configurations is mandatory to support in the drivers.
cli=
driver-impl-xenserver=complete
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=complete
driver-impl-libvirt-kvm-s390x=complete
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=complete
driver-impl-libvirt-xen=complete
driver-impl-vmware=complete
driver-impl-hyperv=missing
driver-impl-ironic=missing
driver-impl-libvirt-vz-vm=complete
driver-impl-libvirt-vz-ct=complete
driver-impl-powervm=missing
[operation.uefi-boot]
title=uefi boot
status=optional
notes=This allows users to boot a guest with uefi firmware.
cli=
driver-impl-xenserver=missing
driver-impl-libvirt-kvm-x86=complete
driver-impl-libvirt-kvm-ppc64=missing
driver-impl-libvirt-kvm-s390x=missing
driver-impl-libvirt-qemu-x86=complete
driver-impl-libvirt-lxc=missing
driver-impl-libvirt-xen=missing
driver-impl-vmware=missing
driver-impl-hyperv=missing
driver-impl-ironic=partial
driver-notes-ironic=depends on hardware support
driver-impl-libvirt-vz-vm=missing
driver-impl-libvirt-vz-ct=missing
driver-impl-powervm=missing
View Git Blame Copy Permalink