octavia/diskimage-create/diskimage-create.sh

#!/bin/bash
#
# Copyright 2014 Hewlett-Packard Development Company, L.P.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#

set -e

usage() {
    echo
    echo "Usage: $(basename $0)"
    echo "            [-a i386 | **amd64** | armhf ]"
    echo "            [-b **haproxy** ]"
    echo "            [-c **~/.cache/image-create** | <cache directory> ]"
    echo "            [-d **xenial**/**7** | trusty | <other release id> ]"
    echo "            [-e]"
    echo "            [-h]"
    echo "            [-i **ubuntu-minimal** | fedora | centos | rhel ]"
    echo "            [-l <log file> ]"
    echo "            [-n]"
    echo "            [-o **amphora-x64-haproxy** | <filename> ]"
    echo "            [-p]"
    echo "            [-r <root password> ]"
    echo "            [-s **2** | <size in GB> ]"
    echo "            [-t **qcow2** | tar | vhd | raw ]"
    echo "            [-v]"
    echo "            [-w <working directory> ]"
    echo "            [-x]"
    echo
    echo "        '-a' is the architecture type for the image (default: amd64)"
    echo "        '-b' is the backend type (default: haproxy)"
    echo "        '-c' is the path to the cache directory (default: ~/.cache/image-create)"
    echo "        '-d' distribution release id (default on ubuntu: xenial)"
    echo "        '-e' enable complete mandatory access control systems when available (default: permissive)"
    echo "        '-h' display this help message"
    echo "        '-i' is the base OS (default: ubuntu)"
    echo "        '-l' is output logfile (default: none)"
    echo "        '-n' disable sshd (default: enabled)"
    echo "        '-o' is the output image file name"
    echo "        '-p' install amphora-agent from distribution packages (default: disabled)"
    echo "        '-r' enable the root account in the generated image (default: disabled)"
    echo "        '-s' is the image size to produce in gigabytes (default: 2)"
    echo "        '-t' is the image type (default: qcow2)"
    echo "        '-v' display the script version"
    echo "        '-w' working directory for image building (default: .)"
    echo "        '-x' enable tracing for diskimage-builder"
    echo
    exit 1
}

version() {
    echo "Amphora disk image creation script version:"\
        "`cat $OCTAVIA_REPO_PATH/diskimage-create/version.txt`"
    exit 1
}

find_system_elements() {
    # List of possible system installation directories
    local system_prefixes="/usr/share /usr/local/share"
    for prefix in $system_prefixes; do
        if [ -d $prefix/$1 ]; then
            echo $prefix/$1
            return
        fi
    done
}

# Figure out where our directory is located
if [ -z $OCTAVIA_REPO_PATH ]; then
    AMP_DIR=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )
    OCTAVIA_REPO_PATH=${OCTAVIA_REPO_PATH:-${AMP_DIR%/*}}
fi
dib_enable_tracing=

AMP_LOGFILE=""

while getopts "a:b:c:d:ehi:l:no:pt:r:s:vw:x" opt; do
    case $opt in
        a)
            AMP_ARCH=$OPTARG
            if [ $AMP_ARCH != "i386" ] && \
                [ $AMP_ARCH != "amd64" ] && \
                [ $AMP_ARCH != "armhf" ]; then
                echo "Error: Unsupported architecture " $AMP_ARCH " specified"
                exit 3
            fi
        ;;
        b)
            if [ $OPTARG == "haproxy" ]; then
                AMP_BACKEND=$OPTARG-octavia
            else
                echo "Error: Unsupported backend type " $AMP_BACKEND " specified"
                exit 3
            fi
        ;;
        c)
            AMP_CACHEDIR=$OPTARG
        ;;
        d)
            AMP_DIB_RELEASE=$OPTARG
        ;;
        e)
            AMP_ENABLE_FULL_MAC_SECURITY=1
        ;;
        h)
            usage
        ;;
        i)
            AMP_BASEOS=$OPTARG
            if [ $AMP_BASEOS != "ubuntu" ] && \
                [ $AMP_BASEOS != "ubuntu-minimal" ] && \
                [ $AMP_BASEOS != "fedora" ] && \
                [ $AMP_BASEOS != "centos" ] && \
                [ $AMP_BASEOS != "rhel" ]; then
                echo "Error: Unsupported base OS " $AMP_BASEOS " specified"
                exit 3
            fi
            if [ $AMP_BASEOS == "ubuntu" ]; then
                AMP_BASEOS="ubuntu-minimal"
            fi
        ;;
        l)
            AMP_LOGFILE="--logfile=$OPTARG"
        ;;
        n)
            AMP_DISABLE_SSHD=1
        ;;
        o)
            AMP_OUTPUTFILENAME=$(readlink -f $OPTARG)
	    amp_dir=$(dirname $AMP_OUTPUTFILENAME)
            if [ ! -d $amp_dir ]; then
                echo "Error: Directory $amp_dir does not exist"
                exit 3
            fi
        ;;
        p)
            AMP_PACKAGE_INSTALL=1
        ;;
        r)
            AMP_ROOTPW=$OPTARG
        ;;
        s)
            AMP_IMAGESIZE=$OPTARG
            if ! [[ $AMP_IMAGESIZE =~ ^[0-9]+$ ]]; then
                echo "Error: Invalid image size " $AMP_IMAGESIZE " specified"
                exit 3
            fi
        ;;
        t)
            AMP_IMAGETYPE=$OPTARG
            if [ $AMP_IMAGETYPE != "qcow2" ] && \
                [ $AMP_IMAGETYPE != "tar" ] && \
                [ $AMP_IMAGETYPE != "vhd" ] && \
                [ $AMP_IMAGETYPE != "raw" ]; then
                echo "Error: Unsupported image type " $AMP_IMAGETYPE " specified"
                exit 3
            fi
        ;;
        v)
            version
        ;;
        w)
            AMP_WORKING_DIR=$OPTARG
        ;;
        x)  dib_enable_tracing=1
        ;;
        *)
            usage
        ;;
    esac
done

shift $((OPTIND-1))
if [ "$1" ]; then
    usage
fi

# Set the Octavia Amphora defaults if they aren't already set
AMP_ARCH=${AMP_ARCH:-"amd64"}

AMP_BACKEND=${AMP_BACKEND:-"haproxy-octavia"}

AMP_CACHEDIR=${AMP_CACHEDIR:-"$HOME/.cache/image-create"}

AMP_BASEOS=${AMP_BASEOS:-"ubuntu-minimal"}

if [ "$AMP_BASEOS" = "ubuntu-minimal" ]; then
    export DIB_RELEASE=${AMP_DIB_RELEASE:-"xenial"}
elif [ "${AMP_BASEOS}" = "centos" ] || [ "${AMP_BASEOS}" = "rhel" ]; then
    export DIB_RELEASE=${AMP_DIB_RELEASE:-"7"}
elif [ "${AMP_BASEOS}" = "fedora" ]; then
    export DIB_RELEASE=${AMP_DIB_RELEASE:-"28"}
fi

AMP_OUTPUTFILENAME=${AMP_OUTPUTFILENAME:-"$PWD/amphora-x64-haproxy"}

AMP_IMAGETYPE=${AMP_IMAGETYPE:-"qcow2"}

AMP_IMAGESIZE=${AMP_IMAGESIZE:-2}

AMP_DISABLE_SSHD=${AMP_DISABLE_SSHD:-0}

AMP_PACKAGE_INSTALL=${AMP_PACKAGE_INSTALL:-0}

AMP_ENABLE_FULL_MAC_SECURITY=${AMP_ENABLE_FULL_MAC_SECURITY:-0}

if [ "$AMP_BASEOS" = "rhel" -o "$AMP_BASEOS" = "centos" -o "$AMP_BASEOS" = "fedora" ] && [ "$AMP_IMAGESIZE" -lt 3 ]; then
    echo "RHEL/centos based amphora requires an image size of at least 3GB"
    exit 1
fi

OCTAVIA_ELEMENTS_PATH=$OCTAVIA_REPO_PATH/elements

if ! [ -d $OCTAVIA_ELEMENTS_PATH ]; then
    SYSTEM_OCTAVIA_ELEMENTS_PATH=$(find_system_elements octavia-image-elements)
    if [ -z ${SYSTEM_OCTAVIA_ELEMENTS_PATH} ]; then
        echo "ERROR: Octavia elements directory not found at: " $OCTAVIA_ELEMENTS_PATH " Exiting."
        exit 1
    fi
    OCTAVIA_ELEMENTS_PATH=${SYSTEM_OCTAVIA_ELEMENTS_PATH}
fi

DIB_REPO_PATH=${DIB_REPO_PATH:-${OCTAVIA_REPO_PATH%/*}/diskimage-builder}

if [ -d $DIB_REPO_PATH ]; then
    export PATH=$PATH:$DIB_REPO_PATH/bin
else
    if ! disk-image-create --version > /dev/null 2>&1; then
        echo "ERROR: diskimage-builder repo directory not found at: " $DIB_REPO_PATH " or in path. Exiting."
        exit 1
    fi
fi

# For system-wide installs, DIB will automatically find the elements, so we only check local path
if [ "$DIB_LOCAL_ELEMENTS_PATH" ]; then
    export ELEMENTS_PATH=$OCTAVIA_ELEMENTS_PATH:$DIB_LOCAL_ELEMENTS_PATH
else
    export ELEMENTS_PATH=$OCTAVIA_ELEMENTS_PATH
fi

export CLOUD_INIT_DATASOURCES=${CLOUD_INIT_DATASOURCES:-"ConfigDrive"}

# Additional RHEL environment checks
if [ "${AMP_BASEOS}" = "rhel" ]; then
    if [ -z "${DIB_LOCAL_IMAGE}" ]; then
        echo "DIB_LOCAL_IMAGE variable must be set and point to a RHEL 7 base cloud image. Exiting."
        echo "For more information, see the README file in ${DIB_ELEMENTS_PATH}/elements/rhel7"
        exit 1
    fi
fi

# Find out what platform we are on
if [ -e /etc/os-release ]; then
    platform=$(head -1 /etc/os-release)
else
    platform=$(head -1 /etc/system-release | grep -e CentOS -e 'Red Hat Enterprise Linux' || :)
    if [ -z "$platform" ]; then
        echo -e "Unknown Host OS. Impossible to build images.\nAborting"
        exit 2
    fi
fi

if [ "$AMP_ROOTPW" ] && [ "$platform" != 'NAME="Ubuntu"' ]; then
    if [ "$(getenforce)" == "Enforcing" ]; then
        echo "A root password cannot be enabled for images built on this platform while SELinux is enabled."
        exit 1
    fi
fi

if [ "$AMP_ROOTPW" ]; then
    echo "Warning: Using a root password in the image, NOT FOR PRODUCTION USAGE."
fi

# Make sure we have the required packages installed
if [ "$platform" = 'NAME="Ubuntu"' ]; then
    PKG_LIST="qemu git"
    for pkg in $PKG_LIST; do
        if ! dpkg --get-selections | grep -q "^$pkg[[:space:]]*install$" >/dev/null; then
            echo "Required package " $pkg " is not installed.  Exiting."
            exit 1
        fi
    done

    # Also check if we can build the BASEOS on this Ubuntu version
    UBUNTU_VERSION=`lsb_release -r | awk '{print $2}'`
    if [ "$AMP_BASEOS" != "ubuntu-minimal" ] && \
        [ 1 -eq $(echo "$UBUNTU_VERSION < 14.04" | bc) ]; then
            echo "Ubuntu minimum version 14.04 required to build $AMP_BASEOS."
            echo "Earlier versions don't support the extended attributes required."
            exit 1
    fi
elif [[ $platform =~ "SUSE" ]]; then
    # OpenSUSE
    # use rpm -q to check for qemu-tools and git-core
    PKG_LIST="qemu-tools git-core"
    for pkg in $PKG_LIST; do
        if ! rpm -q $pkg &> /dev/null; then
            echo "Required package " ${pkg/\*} " is not installed.  Exiting."
            exit 1
        fi
    done
else
    # fedora/centos/rhel
    # Actual qemu-img name may be qemu-img, qemu-img-ev, qemu-img-rhev, ...
    # "dnf|yum install qemu-img" works for all, but search requires wildcard
    PKG_LIST="qemu-img* git"
    for pkg in $PKG_LIST; do
        if ! rpm -qa $pkg ; then
            echo "Required package " ${pkg/\*} " is not installed.  Exiting."
            exit 1
        fi
    done
fi

if  [ "$AMP_WORKING_DIR" ]; then
    mkdir -p $AMP_WORKING_DIR
    TEMP=$(mktemp -d $AMP_WORKING_DIR/diskimage-create.XXXXXX)
else
    TEMP=$(mktemp -d diskimage-create.XXXXXX)
fi
pushd $TEMP > /dev/null

# Setup the elements list

AMP_element_sequence=${AMP_element_sequence:-"base vm"}
if [ "${AMP_BASEOS}" = "centos" ] || [ "${AMP_BASEOS}" = "rhel" ]; then
    AMP_element_sequence="$AMP_element_sequence ${AMP_BASEOS}${DIB_RELEASE}"
else
    AMP_element_sequence="$AMP_element_sequence ${AMP_BASEOS}"
fi

if [ "$AMP_PACKAGE_INSTALL" -eq 1 ]; then
    export DIB_INSTALLTYPE_amphora_agent=package
else
    # We will need pip for amphora-agent
    AMP_element_sequence="$AMP_element_sequence pip-and-virtualenv"
fi
# Add our backend element (haproxy, etc.)
AMP_element_sequence="$AMP_element_sequence $AMP_BACKEND"

if [ "$AMP_ROOTPW" ]; then
    AMP_element_sequence="$AMP_element_sequence root-passwd"
    export DIB_PASSWORD=$AMP_ROOTPW
fi

# Add the Amphora Agent and Pyroute elements
AMP_element_sequence="$AMP_element_sequence rebind-sshd"
AMP_element_sequence="$AMP_element_sequence no-resolvconf"
AMP_element_sequence="$AMP_element_sequence amphora-agent"
AMP_element_sequence="$AMP_element_sequence sos"

if [ "$AMP_ENABLE_FULL_MAC_SECURITY" -ne 1 ]; then
    # SELinux systems
    if [ "${AMP_BASEOS}" = "centos" ] || [ "${AMP_BASEOS}" = "fedora" ] || [ "${AMP_BASEOS}" = "rhel" ]; then
        AMP_element_sequence="$AMP_element_sequence selinux-permissive"
    fi
fi

# Add keepalived-octavia element
AMP_element_sequence="$AMP_element_sequence keepalived-octavia"
AMP_element_sequence="$AMP_element_sequence ipvsadmin"

# Add pip-cache element
AMP_element_sequence="$AMP_element_sequence pip-cache"

# Add certificate ramfs element
AMP_element_sequence="$AMP_element_sequence certs-ramfs"

# Disable SSHD if requested
if [ "$AMP_DISABLE_SSHD" -eq 1 ]; then
    AMP_element_sequence="$AMP_element_sequence remove-sshd"
fi

# Allow full elements override
if [ "$DIB_ELEMENTS" ]; then
    AMP_element_sequence="$DIB_ELEMENTS"
fi

if [ "$DIB_LOCAL_ELEMENTS" ]; then
    AMP_element_sequence="$AMP_element_sequence $DIB_LOCAL_ELEMENTS"
fi

# Build the image

if [ "$AMP_BASEOS" = "ubuntu-minimal" ]; then
    export DIB_CLOUD_INIT_DATASOURCES=$CLOUD_INIT_DATASOURCES
fi

dib_trace_arg=
if [ -n "$dib_enable_tracing" ]; then
    dib_trace_arg="-x"
fi

disk-image-create $AMP_LOGFILE $dib_trace_arg -a $AMP_ARCH -o $AMP_OUTPUTFILENAME -t $AMP_IMAGETYPE --image-size $AMP_IMAGESIZE --image-cache $AMP_CACHEDIR $AMP_element_sequence

popd > /dev/null # out of $TEMP
rm -rf $TEMP