diff --git a/multi-node-aio/deploy-vms.sh b/multi-node-aio/deploy-vms.sh
index d8465ed2..474a41bd 100755
--- a/multi-node-aio/deploy-vms.sh
+++ b/multi-node-aio/deploy-vms.sh
@@ -57,11 +57,14 @@ done
 # Ensure that all running VMs have an updated apt-cache with keys
 for node in $(get_all_hosts); do
   ssh -q -n -f -o StrictHostKeyChecking=no 10.0.0.${node#*":"} "mkdir -p /tmp/keys"
-  for i in /etc/apt/apt.conf.d/00-nokey /etc/apt/sources.list /etc/apt/sources.list.d/* /tmp/keys/*; do
+  for i in /etc/apt/apt.conf.d/00-nokey /etc/apt/sources.list ~/sources.list /etc/apt/sources.list.d/* /tmp/keys/*; do
     if [[ -f "$i" ]]; then
       scp "$i" "10.0.0.${node#*":"}:$i"
     fi
   done
+  if [[ "14.04" != "$(lsb_release -sr)" ]]; then
+    ssh -q -n -f -o StrictHostKeyChecking=no 10.0.0.${node#*":"} "mv ~/sources.list /etc/apt/sources.list"
+  fi
   ssh -q -n -f -o StrictHostKeyChecking=no 10.0.0.${node#*":"} "(for i in /tmp/keys/*; do \
       apt-key add \$i; \
       apt-key adv --keyserver keyserver.ubuntu.com --recv-keys \$(basename \$i); done); \
diff --git a/multi-node-aio/setup-cobbler.sh b/multi-node-aio/setup-cobbler.sh
index 5349d5fb..65abe2b1 100755
--- a/multi-node-aio/setup-cobbler.sh
+++ b/multi-node-aio/setup-cobbler.sh
@@ -17,6 +17,9 @@ set -eu
 # Load all functions
 source functions.rc
 
+# The default image for VMs, change it to 16.04 if you want to use xenial as operation system.
+DEFAULT_IMAGE="${DEFAULT_IMAGE:-"$(lsb_release -sd | awk '{print $2}')"}"
+
 # Install cobbler
 wget -qO - http://download.opensuse.org/repositories/home:/libertas-ict:/cobbler26/xUbuntu_14.04/Release.key | apt-key add -
 add-apt-repository "deb http://download.opensuse.org/repositories/home:/libertas-ict:/cobbler26/xUbuntu_14.04/ ./"
@@ -58,7 +61,11 @@ chown www-data /var/lib/cobbler/webui_sessions
 cp -v templates/dhcp.template /etc/cobbler/dhcp.template
 
 # Create a trusty sources file
-cp -v templates/trusty-sources.list /var/www/html/trusty-sources.list
+if [[ "14.04.4" == $DEFAULT_IMAGE ]]; then
+  cp -v templates/trusty-sources.list /var/www/html/trusty-sources.list
+else
+  cp -v templates/xenial-sources.list /var/www/html/xenial-sources.list
+fi
 
 # Set the default preseed device name.
 #  This is being set because sda is on hosts, vda is kvm, xvda is xen.
@@ -81,29 +88,32 @@ service apache2 restart
 service xinetd restart
 update-rc.d cobblerd defaults
 
+# Update Cobbler Signatures
+cobbler signature update
+
 # Get ubuntu server image
 mkdir_check "/var/cache/iso"
 pushd /var/cache/iso
-  if [ -f "/var/cache/iso/ubuntu-14.04.4-server-amd64.iso" ]; then
-    rm /var/cache/iso/ubuntu-14.04.4-server-amd64.iso
+  if [ -f "/var/cache/iso/ubuntu-"${DEFAULT_IMAGE}"-server-amd64.iso" ]; then
+    rm /var/cache/iso/ubuntu-"${DEFAULT_IMAGE}"-server-amd64.iso
   fi
-  wget http://releases.ubuntu.com/trusty/ubuntu-14.04.4-server-amd64.iso
+  wget http://releases.ubuntu.com/"${DEFAULT_IMAGE:0:5}"/ubuntu-"${DEFAULT_IMAGE}"-server-amd64.iso
 popd
 
 # import cobbler image
-if ! cobbler distro list | grep -qw "ubuntu-14.04.4-server-x86_64"; then
+if ! cobbler distro list | grep -qw "ubuntu-"${DEFAULT_IMAGE}"-server-x86_64"; then
   mkdir_check "/mnt/iso"
-  mount -o loop /var/cache/iso/ubuntu-14.04.4-server-amd64.iso /mnt/iso
-  cobbler import --name=ubuntu-14.04.4-server-amd64 --path=/mnt/iso
+  mount -o loop /var/cache/iso/ubuntu-"${DEFAULT_IMAGE}"-server-amd64.iso /mnt/iso
+  cobbler import --name=ubuntu-"${DEFAULT_IMAGE}"-server-amd64 --path=/mnt/iso
   umount /mnt/iso
 fi
 
 # Create cobbler profile
-for seed_file in /var/lib/cobbler/kickstarts/ubuntu*14.04*.seed; do
+for seed_file in /var/lib/cobbler/kickstarts/ubuntu*"${DEFAULT_IMAGE:0:5}"*.seed; do
   if ! cobbler profile list | grep -qw "${seed_file##*'/'}"; then
     cobbler profile add \
       --name "${seed_file##*'/'}" \
-      --distro ubuntu-14.04.4-server-x86_64 \
+      --distro ubuntu-"${DEFAULT_IMAGE}"-server-x86_64 \
       --kickstart "${seed_file}"
   fi
 done
@@ -114,8 +124,6 @@ cobbler sync
 # Get Loaders
 cobbler get-loaders
 
-# Update Cobbler Signatures
-cobbler signature update
 
 # Create cobbler systems
 for node_type in $(get_all_types); do
@@ -127,9 +135,9 @@ for node_type in $(get_all_types); do
     echo "adding node ${node%%':'*} from the cobbler system"
     cobbler system add \
       --name="${node%%':'*}" \
-      --profile="ubuntu-server-14.04-unattended-cobbler-${node_type}.seed" \
+      --profile="ubuntu-server-"${DEFAULT_IMAGE:0:5}"-unattended-cobbler-${node_type}.seed" \
       --hostname="${node%%":"*}.openstackci.local" \
-      --kopts="interface=${DEFAULT_NETWORK}" \
+      --kopts="interface=${DEFAULT_NETWORK} net.ifnames=0 biosdevname=0" \
       --interface="${DEFAULT_NETWORK}" \
       --mac="52:54:00:bd:81:${node:(-2)}" \
       --ip-address="10.0.0.${node#*":"}" \
@@ -140,6 +148,9 @@ for node_type in $(get_all_types); do
   done
 done
 
+# sync cobbler
+cobbler sync
+
 # Restart XinetD
 service xinetd stop
 service xinetd start
diff --git a/multi-node-aio/setup-host.sh b/multi-node-aio/setup-host.sh
index 5a58de22..6324287c 100755
--- a/multi-node-aio/setup-host.sh
+++ b/multi-node-aio/setup-host.sh
@@ -108,6 +108,20 @@ deb [arch=i386] http://archive.ubuntu.com/ubuntu trusty-backports main universe
 deb [arch=i386] http://archive.ubuntu.com/ubuntu trusty-security main universe
 EOF
 
+cat > ~/sources.list <<EOF
+# Faster likely unsigned repo
+deb [arch=amd64] http://mirror.rackspace.com/ubuntu xenial main universe
+deb [arch=amd64] http://mirror.rackspace.com/ubuntu xenial-updates main universe
+deb [arch=amd64] http://mirror.rackspace.com/ubuntu xenial-backports main universe
+deb [arch=amd64] http://mirror.rackspace.com/ubuntu xenial-security main universe
+
+# i386 comes from the global known repo. This is slower and so it is only used for i386 packages
+deb [arch=i386] http://archive.ubuntu.com/ubuntu xenial main universe
+deb [arch=i386] http://archive.ubuntu.com/ubuntu xenial-updates main universe
+deb [arch=i386] http://archive.ubuntu.com/ubuntu xenial-backports main universe
+deb [arch=i386] http://archive.ubuntu.com/ubuntu xenial-security main universe
+EOF
+
 # Allow apt repos to be UnAuthenticated
 cat > /etc/apt/apt.conf.d/00-nokey <<EOF
 APT { Get { AllowUnauthenticated "1"; }; };
diff --git a/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-cinder.seed b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-cinder.seed
new file mode 100644
index 00000000..3aba1995
--- /dev/null
+++ b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-cinder.seed
@@ -0,0 +1,293 @@
+#
+# Ubuntu Server 16.04 Preseed
+#
+# Usage:
+#
+# This Ubuntu Preseed file is meant to be used with Cobbler. It has been
+# tested only on Cobbler 2.4.1. It is a completely unattended install.
+#
+# References:
+#
+# https://help.ubuntu.com/16.04/installation-guide/example-preseed.txt
+# http://www.claudiokuenzler.com/blog/513/debian-ubuntu-preseed-create-two-volume-groups-same-disk
+
+#############
+#
+# Kernel Options
+#
+#############
+
+# Use the following option to add additional boot parameters for the
+# installed system (if supported by the bootloader installer).
+# Note: options passed to the installer will be added automatically.
+d-i debian-installer/add-kernel-opts string $kernel_options_post
+d-i debian-installer/add-kernel-opts string biosdevname=0 net.ifnames=0
+#############
+#
+# Networking
+#
+#############
+
+#if "__DEFAULT_NETWORK__" in $interfaces
+    #set idata = $interfaces["__DEFAULT_NETWORK__"]
+    #set static = $idata['static']
+    #set ip_address = $idata.get("ip_address", "127.0.0.1")
+    #set netmask = $idata.get("netmask", "255.0.0.0")
+    #set gateway = $getVar('gateway','127.0.0.1')
+#end if
+
+d-i netcfg/choose_interface select __DEFAULT_NETWORK__
+d-i netcfg/dhcp_timeout string 60
+d-i netcfg/disable_autoconfig boolean true
+d-i netcfg/dhcp_failed note
+d-i netcfg/dhcp_options select Configure network manually
+
+#if $static
+# Static network configuration.
+d-i netcfg/get_ipaddress string $idata.get("ip_address", "127.0.0.1")
+d-i netcfg/get_netmask string $idata.get("netmask", "255.0.0.0")
+d-i netcfg/get_gateway string $gateway
+d-i netcfg/get_nameservers string $name_servers[0]
+d-i netcfg/confirm_static boolean true
+#end if
+
+d-i netcfg/get_hostname string $system_name
+d-i netcfg/get_domain string $hostname
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+
+#############
+#
+# Pre Install
+#
+#############
+
+# Command Line 1: This is necessary otherwise you will be prompted to umount /dev/__DEVICE_NAME__. See Ubuntu bug #1347726.
+d-i preseed/early_command string \
+      umount /media || true
+
+#############
+#
+# Net Image
+#
+#############
+
+# Required at least for 12.10+
+d-i live-installer/net-image string http://$http_server/cobbler/links/$distro_name/install/filesystem.squashfs
+
+#############
+#
+# Localization
+#
+#############
+
+d-i debian-installer/locale string en
+d-i debian-installer/country string US
+d-i debian-installer/locale string en_US.UTF-8
+d-i debian-installer/language string en
+
+#############
+#
+# Keyboard
+#
+#############
+
+# Disable automatic (interactive) keymap detection.
+d-i console-setup/ask_detect boolean false
+d-i console-setup/layoutcode string us
+d-i console-setup/variantcode string
+d-i keyboard-configuration/layoutcode string us
+
+#############
+#
+# Mirror
+#
+#############
+
+d-i mirror/country string manual
+d-i mirror/http/proxy string
+d-i mirror/http/hostname string $http_server
+d-i mirror/http/directory string $install_source_directory
+
+#############
+#
+# Clock and Time Zone
+#
+#############
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+d-i clock-setup/ntp-server string ntp.ubuntu.com
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Central
+
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+#############
+#
+# Partitioning
+#
+#############
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+d-i partman-auto/method string lvm
+d-i partman-auto/disk string /dev/__DEVICE_NAME__
+
+# For LVM partitioning, you can select how much of the volume group to use
+# for logical volumes.
+d-i partman-auto-lvm/guided_size string max
+
+# This is used to auto-confirm its OK to use a partition without an FS
+d-i partman-basicmethods/method_only boolean false
+
+d-i partman-auto/choose_recipe select custompartitioning
+d-i partman-auto/expert_recipe string \
+      custompartitioning :: \
+              512 1 512 ext2                                  \
+                      $primary{ }                             \
+                      $bootable{ }                            \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext2 }    \
+                      label{ boot }                           \
+                      mountpoint{ /boot }                     \
+              .                                               \
+              1024 1 100% ext4                                \
+                      $primary{ }                             \
+                      method{ lvm }                           \
+                      device{ /dev/__DEVICE_NAME__2 }          \
+                      vg_name{ lxc }                          \
+              .                                               \
+              8192 1 8192 linux-swap                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ swap00 }                       \
+                      method{ swap } format{ }                \
+              .                                               \
+              51200 1 51200 ext4                              \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ root00 }                       \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ root }                           \
+                      mountpoint{ / }                         \
+              .                                               \
+              76800 1 76800 ext4                              \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ openstack00 }                  \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ openstack00 }                    \
+                      mountpoint{ /openstack }                \
+              .                                               \
+              1024 1 1000000000 ext4                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ cinder00 }                     \
+                      method{ keep }                          \
+              .                                               \
+
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+#############
+#
+# Packages
+#
+#############
+
+# Package selection
+tasksel tasksel/first multiselect openssh-server
+
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+d-i pkgsel/upgrade select none
+d-i pkgsel/include string bridge-utils ethtool ifenslave lvm2 openssh-server python2.7 vim vlan
+# Policy for applying updates. May be "none" (no automatic updates),
+# "unattended-upgrades" (install security updates automatically), or
+# "landscape" (manage system with Landscape).
+d-i pkgsel/update-policy select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+popularity-contest popularity-contest/participate boolean false
+
+#############
+#
+# Users and Password
+#
+#############
+
+# Skip creation of a root account (normal user account will be able to
+# use sudo). The default is false; preseed this to true if you want to set
+# a root password.
+d-i passwd/root-login boolean true
+
+# Alternatively, to skip creation of a normal user account.
+d-i passwd/make-user boolean false
+
+# The installer will warn about weak passwords. If you are sure you know
+# what you're doing and want to override it, uncomment this.
+d-i user-setup/allow-password-weak boolean true
+
+# Root password, either in clear text
+d-i passwd/root-password password cobbler
+d-i passwd/root-password-again password cobbler
+
+#############
+#
+# Bootloader
+#
+#############
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+#############
+#
+# Post Install
+#
+#############
+
+d-i preseed/late_command string \
+  wget http://$http_server/xenial-sources.list -O /target/etc/apt/sources.list; \
+  wget http://$http_server/osa-$hostname-bridges.cfg -O /target/etc/network/interfaces.d/osa-$hostname-bridges.cfg; \
+  wget http://$http_server/cblr/svc/op/nopxe/system/$system_name -O /dev/null; \
+  sed -i '/PermitRootLogin / s/ .*/ yes/' /target/etc/ssh/sshd_config; \
+  mkdir /target/root/.ssh; \
+  chmod 0700 /target/root/.ssh; \
+  echo "__SSHKEY__" >> /target/root/.ssh/authorized_keys; \
+  vgcreate cinder-volumes /dev/mapper/lxc-cinder00; \
+  killall.sh || true; \
+  netcfg; \
+  echo -e '#!/bin/sh\n\nif ! grep -q "^source.*cfg$" /etc/network/interfaces; then echo "source /etc/network/interfaces.d/*.cfg" >> /etc/network/interfaces; fi' > /target/etc/network/if-pre-up.d/multi-nic; \
+  chmod +x /target/etc/network/if-pre-up.d/multi-nic
+
+#############
+#
+# Finish
+#
+#############
+
+# Reboot after the install is finished.
+finish-install finish-install/reboot_in_progress note
\ No newline at end of file
diff --git a/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-infra.seed b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-infra.seed
new file mode 100644
index 00000000..bf794fb7
--- /dev/null
+++ b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-infra.seed
@@ -0,0 +1,287 @@
+#
+# Ubuntu Server 16.04 Preseed
+#
+# Usage:
+#
+# This Ubuntu Preseed file is meant to be used with Cobbler. It has been
+# tested only on Cobbler 2.4.1. It is a completely unattended install.
+#
+# References:
+#
+# https://help.ubuntu.com/16.04/installation-guide/example-preseed.txt
+# http://www.claudiokuenzler.com/blog/513/debian-ubuntu-preseed-create-two-volume-groups-same-disk
+
+#############
+#
+# Kernel Options
+#
+#############
+
+# Use the following option to add additional boot parameters for the
+# installed system (if supported by the bootloader installer).
+# Note: options passed to the installer will be added automatically.
+d-i debian-installer/add-kernel-opts string $kernel_options_post
+d-i debian-installer/add-kernel-opts string biosdevname=0 net.ifnames=0
+#############
+#
+# Networking
+#
+#############
+
+#if "__DEFAULT_NETWORK__" in $interfaces
+    #set idata = $interfaces["__DEFAULT_NETWORK__"]
+    #set static = $idata['static']
+    #set ip_address = $idata.get("ip_address", "127.0.0.1")
+    #set netmask = $idata.get("netmask", "255.0.0.0")
+    #set gateway = $getVar('gateway','127.0.0.1')
+#end if
+
+d-i netcfg/choose_interface select __DEFAULT_NETWORK__
+d-i netcfg/dhcp_timeout string 60
+d-i netcfg/disable_autoconfig boolean true
+d-i netcfg/dhcp_failed note
+d-i netcfg/dhcp_options select Configure network manually
+
+#if $static
+# Static network configuration.
+d-i netcfg/get_ipaddress string $idata.get("ip_address", "127.0.0.1")
+d-i netcfg/get_netmask string $idata.get("netmask", "255.0.0.0")
+d-i netcfg/get_gateway string $gateway
+d-i netcfg/get_nameservers string $name_servers[0]
+d-i netcfg/confirm_static boolean true
+#end if
+
+d-i netcfg/get_hostname string $system_name
+d-i netcfg/get_domain string $hostname
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+
+#############
+#
+# Pre Install
+#
+#############
+
+# Command Line 1: This is necessary otherwise you will be prompted to umount /dev/__DEVICE_NAME__. See Ubuntu bug #1347726.
+d-i preseed/early_command string \
+      umount /media || true
+
+#############
+#
+# Net Image
+#
+#############
+
+# Required at least for 12.10+
+d-i live-installer/net-image string http://$http_server/cobbler/links/$distro_name/install/filesystem.squashfs
+
+#############
+#
+# Localization
+#
+#############
+
+d-i debian-installer/locale string en
+d-i debian-installer/country string US
+d-i debian-installer/locale string en_US.UTF-8
+d-i debian-installer/language string en
+
+#############
+#
+# Keyboard
+#
+#############
+
+# Disable automatic (interactive) keymap detection.
+d-i console-setup/ask_detect boolean false
+d-i console-setup/layoutcode string us
+d-i console-setup/variantcode string
+d-i keyboard-configuration/layoutcode string us
+
+#############
+#
+# Mirror
+#
+#############
+
+d-i mirror/country string manual
+d-i mirror/http/proxy string
+d-i mirror/http/hostname string $http_server
+d-i mirror/http/directory string $install_source_directory
+
+#############
+#
+# Clock and Time Zone
+#
+#############
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+d-i clock-setup/ntp-server string ntp.ubuntu.com
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Central
+
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+#############
+#
+# Partitioning
+#
+#############
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+d-i partman-auto/method string lvm
+d-i partman-auto/disk string /dev/__DEVICE_NAME__
+
+# For LVM partitioning, you can select how much of the volume group to use
+# for logical volumes.
+d-i partman-auto-lvm/guided_size string max
+
+d-i partman-auto/choose_recipe select custompartitioning
+d-i partman-auto/expert_recipe string \
+      custompartitioning :: \
+              512 1 512 ext2                                  \
+                      $primary{ }                             \
+                      $bootable{ }                            \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext2 }    \
+                      label{ boot }                           \
+                      mountpoint{ /boot }                     \
+              .                                               \
+              1024 1 100% ext4                                \
+                      $primary{ }                             \
+                      method{ lvm }                           \
+                      device{ /dev/__DEVICE_NAME__2 }          \
+                      vg_name{ lxc }                          \
+              .                                               \
+              8192 1 8192 linux-swap                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ swap00 }                       \
+                      method{ swap } format{ }                \
+              .                                               \
+              153600 1 153600 ext4                            \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ openstack00 }                  \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ openstack00 }                    \
+                      mountpoint{ /openstack }                \
+              .                                               \
+              1024 1 1000000000 ext4                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ root00 }                       \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ root }                           \
+                      mountpoint{ / }                         \
+              .                                               \
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+#############
+#
+# Packages
+#
+#############
+
+# Package selection
+tasksel tasksel/first multiselect openssh-server
+
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+d-i pkgsel/upgrade select none
+d-i pkgsel/include string bridge-utils ethtool ifenslave lvm2 openssh-server python2.7 vim vlan
+# Policy for applying updates. May be "none" (no automatic updates),
+# "unattended-upgrades" (install security updates automatically), or
+# "landscape" (manage system with Landscape).
+d-i pkgsel/update-policy select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+popularity-contest popularity-contest/participate boolean false
+
+#############
+#
+# Users and Password
+#
+#############
+
+# Skip creation of a root account (normal user account will be able to
+# use sudo). The default is false; preseed this to true if you want to set
+# a root password.
+d-i passwd/root-login boolean true
+
+# Alternatively, to skip creation of a normal user account.
+d-i passwd/make-user boolean false
+
+# The installer will warn about weak passwords. If you are sure you know
+# what you're doing and want to override it, uncomment this.
+d-i user-setup/allow-password-weak boolean true
+
+# Root password, either in clear text
+d-i passwd/root-password password cobbler
+d-i passwd/root-password-again password cobbler
+
+#############
+#
+# Bootloader
+#
+#############
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+#############
+#
+# Post Install
+#
+#############
+
+# Command Line 1: Allow root to SSH.
+# Command Line 2: Cobbler overwrites sources.list with its own repos. Put the default Ubuntu sources.list back.
+# Command Line 3: Cobbler API call to turn off netboot.
+d-i preseed/late_command string \
+  wget http://$http_server/xenial-sources.list -O /target/etc/apt/sources.list; \
+  wget http://$http_server/osa-$hostname-bridges.cfg -O /target/etc/network/interfaces.d/osa-$hostname-bridges.cfg; \
+  wget http://$http_server/cblr/svc/op/nopxe/system/$system_name -O /dev/null; \
+  sed -i '/PermitRootLogin / s/ .*/ yes/' /target/etc/ssh/sshd_config; \
+  mkdir /target/root/.ssh; \
+  chmod 0700 /target/root/.ssh; \
+  echo "__SSHKEY__" >> /target/root/.ssh/authorized_keys; \
+  killall.sh || true; \
+  netcfg; \
+  echo -e '#!/bin/sh\n\nif ! grep -q "^source.*cfg$" /etc/network/interfaces; then echo "source /etc/network/interfaces.d/*.cfg" >> /etc/network/interfaces; fi' > /target/etc/network/if-pre-up.d/multi-nic; \
+  chmod +x /target/etc/network/if-pre-up.d/multi-nic
+
+
+#############
+#
+# Finish
+#
+#############
+
+# Reboot after the install is finished.
+finish-install finish-install/reboot_in_progress note
\ No newline at end of file
diff --git a/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-logging.seed b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-logging.seed
new file mode 100644
index 00000000..6a3a125c
--- /dev/null
+++ b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-logging.seed
@@ -0,0 +1,288 @@
+#
+# Ubuntu Server 16.04 Preseed
+#
+# Usage:
+#
+# This Ubuntu Preseed file is meant to be used with Cobbler. It has been
+# tested only on Cobbler 2.4.1. It is a completely unattended install.
+#
+# References:
+#
+# https://help.ubuntu.com/16.04/installation-guide/example-preseed.txt
+# http://www.claudiokuenzler.com/blog/513/debian-ubuntu-preseed-create-two-volume-groups-same-disk
+
+#############
+#
+# Kernel Options
+#
+#############
+
+# Use the following option to add additional boot parameters for the
+# installed system (if supported by the bootloader installer).
+# Note: options passed to the installer will be added automatically.
+d-i debian-installer/add-kernel-opts string $kernel_options_post
+d-i debian-installer/add-kernel-opts string biosdevname=0 net.ifnames=0
+#############
+#
+# Networking
+#
+#############
+
+#if "__DEFAULT_NETWORK__" in $interfaces
+    #set idata = $interfaces["__DEFAULT_NETWORK__"]
+    #set static = $idata['static']
+    #set ip_address = $idata.get("ip_address", "127.0.0.1")
+    #set netmask = $idata.get("netmask", "255.0.0.0")
+    #set gateway = $getVar('gateway','127.0.0.1')
+#end if
+
+d-i netcfg/choose_interface select __DEFAULT_NETWORK__
+d-i netcfg/dhcp_timeout string 60
+d-i netcfg/disable_autoconfig boolean true
+d-i netcfg/dhcp_failed note
+d-i netcfg/dhcp_options select Configure network manually
+
+#if $static
+# Static network configuration.
+d-i netcfg/get_ipaddress string $idata.get("ip_address", "127.0.0.1")
+d-i netcfg/get_netmask string $idata.get("netmask", "255.0.0.0")
+d-i netcfg/get_gateway string $gateway
+d-i netcfg/get_nameservers string $name_servers[0]
+d-i netcfg/confirm_static boolean true
+#end if
+
+d-i netcfg/get_hostname string $system_name
+d-i netcfg/get_domain string $hostname
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+
+#############
+#
+# Pre Install
+#
+#############
+
+# Command Line 1: This is necessary otherwise you will be prompted to umount /dev/__DEVICE_NAME__. See Ubuntu bug #1347726.
+d-i preseed/early_command string \
+      umount /media || true
+
+#############
+#
+# Net Image
+#
+#############
+
+# Required at least for 12.10+
+d-i live-installer/net-image string http://$http_server/cobbler/links/$distro_name/install/filesystem.squashfs
+
+#############
+#
+# Localization
+#
+#############
+
+d-i debian-installer/locale string en
+d-i debian-installer/country string US
+d-i debian-installer/locale string en_US.UTF-8
+d-i debian-installer/language string en
+
+#############
+#
+# Keyboard
+#
+#############
+
+# Disable automatic (interactive) keymap detection.
+d-i console-setup/ask_detect boolean false
+d-i console-setup/layoutcode string us
+d-i console-setup/variantcode string
+d-i keyboard-configuration/layoutcode string us
+
+#############
+#
+# Mirror
+#
+#############
+
+d-i mirror/country string manual
+d-i mirror/http/proxy string
+d-i mirror/http/hostname string $http_server
+d-i mirror/http/directory string $install_source_directory
+
+#############
+#
+# Clock and Time Zone
+#
+#############
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+d-i clock-setup/ntp-server string ntp.ubuntu.com
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Central
+
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+#############
+#
+# Partitioning
+#
+#############
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+d-i partman-auto/method string lvm
+d-i partman-auto/disk string /dev/__DEVICE_NAME__
+
+# For LVM partitioning, you can select how much of the volume group to use
+# for logical volumes.
+d-i partman-auto-lvm/guided_size string max
+
+d-i partman-auto/choose_recipe select custompartitioning
+d-i partman-auto/expert_recipe string \
+      custompartitioning :: \
+              512 1 512 ext2                                  \
+                      $primary{ }                             \
+                      $bootable{ }                            \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext2 }    \
+                      label{ boot }                           \
+                      mountpoint{ /boot }                     \
+              .                                               \
+              1024 1 100% ext4                                \
+                      $primary{ }                             \
+                      method{ lvm }                           \
+                      device{ /dev/__DEVICE_NAME__2 }          \
+                      vg_name{ lxc }                          \
+              .                                               \
+              8192 1 8192 linux-swap                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ swap00 }                       \
+                      method{ swap } format{ }                \
+              .                                               \
+              51200 1 51200 ext4                              \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ root00 }                       \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ root }                           \
+                      mountpoint{ / }                         \
+              .                                               \
+              1024 1 1000000000 ext4                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ openstack00 }                  \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ openstack00 }                    \
+                      mountpoint{ /openstack }                \
+              .                                               \
+
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+#############
+#
+# Packages
+#
+#############
+
+# Package selection
+tasksel tasksel/first multiselect openssh-server
+
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+d-i pkgsel/upgrade select none
+d-i pkgsel/include string bridge-utils ethtool ifenslave lvm2 openssh-server python2.7 vim vlan
+# Policy for applying updates. May be "none" (no automatic updates),
+# "unattended-upgrades" (install security updates automatically), or
+# "landscape" (manage system with Landscape).
+d-i pkgsel/update-policy select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+popularity-contest popularity-contest/participate boolean false
+
+#############
+#
+# Users and Password
+#
+#############
+
+# Skip creation of a root account (normal user account will be able to
+# use sudo). The default is false; preseed this to true if you want to set
+# a root password.
+d-i passwd/root-login boolean true
+
+# Alternatively, to skip creation of a normal user account.
+d-i passwd/make-user boolean false
+
+# The installer will warn about weak passwords. If you are sure you know
+# what you're doing and want to override it, uncomment this.
+d-i user-setup/allow-password-weak boolean true
+
+# Root password, either in clear text
+d-i passwd/root-password password cobbler
+d-i passwd/root-password-again password cobbler
+
+#############
+#
+# Bootloader
+#
+#############
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+#############
+#
+# Post Install
+#
+#############
+
+# Command Line 1: Allow root to SSH.
+# Command Line 2: Cobbler overwrites sources.list with its own repos. Put the default Ubuntu sources.list back.
+# Command Line 3: Cobbler API call to turn off netboot.
+d-i preseed/late_command string \
+  wget http://$http_server/xenial-sources.list -O /target/etc/apt/sources.list; \
+  wget http://$http_server/osa-$hostname-bridges.cfg -O /target/etc/network/interfaces.d/osa-$hostname-bridges.cfg; \
+  wget http://$http_server/cblr/svc/op/nopxe/system/$system_name -O /dev/null; \
+  sed -i '/PermitRootLogin / s/ .*/ yes/' /target/etc/ssh/sshd_config; \
+  mkdir /target/root/.ssh; \
+  chmod 0700 /target/root/.ssh; \
+  echo "__SSHKEY__" >> /target/root/.ssh/authorized_keys; \
+  killall.sh || true; \
+  netcfg; \
+  echo -e '#!/bin/sh\n\nif ! grep -q "^source.*cfg$" /etc/network/interfaces; then echo "source /etc/network/interfaces.d/*.cfg" >> /etc/network/interfaces; fi' > /target/etc/network/if-pre-up.d/multi-nic; \
+  chmod +x /target/etc/network/if-pre-up.d/multi-nic
+
+
+#############
+#
+# Finish
+#
+#############
+
+# Reboot after the install is finished.
+finish-install finish-install/reboot_in_progress note
\ No newline at end of file
diff --git a/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-network.seed b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-network.seed
new file mode 100644
index 00000000..bf794fb7
--- /dev/null
+++ b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-network.seed
@@ -0,0 +1,287 @@
+#
+# Ubuntu Server 16.04 Preseed
+#
+# Usage:
+#
+# This Ubuntu Preseed file is meant to be used with Cobbler. It has been
+# tested only on Cobbler 2.4.1. It is a completely unattended install.
+#
+# References:
+#
+# https://help.ubuntu.com/16.04/installation-guide/example-preseed.txt
+# http://www.claudiokuenzler.com/blog/513/debian-ubuntu-preseed-create-two-volume-groups-same-disk
+
+#############
+#
+# Kernel Options
+#
+#############
+
+# Use the following option to add additional boot parameters for the
+# installed system (if supported by the bootloader installer).
+# Note: options passed to the installer will be added automatically.
+d-i debian-installer/add-kernel-opts string $kernel_options_post
+d-i debian-installer/add-kernel-opts string biosdevname=0 net.ifnames=0
+#############
+#
+# Networking
+#
+#############
+
+#if "__DEFAULT_NETWORK__" in $interfaces
+    #set idata = $interfaces["__DEFAULT_NETWORK__"]
+    #set static = $idata['static']
+    #set ip_address = $idata.get("ip_address", "127.0.0.1")
+    #set netmask = $idata.get("netmask", "255.0.0.0")
+    #set gateway = $getVar('gateway','127.0.0.1')
+#end if
+
+d-i netcfg/choose_interface select __DEFAULT_NETWORK__
+d-i netcfg/dhcp_timeout string 60
+d-i netcfg/disable_autoconfig boolean true
+d-i netcfg/dhcp_failed note
+d-i netcfg/dhcp_options select Configure network manually
+
+#if $static
+# Static network configuration.
+d-i netcfg/get_ipaddress string $idata.get("ip_address", "127.0.0.1")
+d-i netcfg/get_netmask string $idata.get("netmask", "255.0.0.0")
+d-i netcfg/get_gateway string $gateway
+d-i netcfg/get_nameservers string $name_servers[0]
+d-i netcfg/confirm_static boolean true
+#end if
+
+d-i netcfg/get_hostname string $system_name
+d-i netcfg/get_domain string $hostname
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+
+#############
+#
+# Pre Install
+#
+#############
+
+# Command Line 1: This is necessary otherwise you will be prompted to umount /dev/__DEVICE_NAME__. See Ubuntu bug #1347726.
+d-i preseed/early_command string \
+      umount /media || true
+
+#############
+#
+# Net Image
+#
+#############
+
+# Required at least for 12.10+
+d-i live-installer/net-image string http://$http_server/cobbler/links/$distro_name/install/filesystem.squashfs
+
+#############
+#
+# Localization
+#
+#############
+
+d-i debian-installer/locale string en
+d-i debian-installer/country string US
+d-i debian-installer/locale string en_US.UTF-8
+d-i debian-installer/language string en
+
+#############
+#
+# Keyboard
+#
+#############
+
+# Disable automatic (interactive) keymap detection.
+d-i console-setup/ask_detect boolean false
+d-i console-setup/layoutcode string us
+d-i console-setup/variantcode string
+d-i keyboard-configuration/layoutcode string us
+
+#############
+#
+# Mirror
+#
+#############
+
+d-i mirror/country string manual
+d-i mirror/http/proxy string
+d-i mirror/http/hostname string $http_server
+d-i mirror/http/directory string $install_source_directory
+
+#############
+#
+# Clock and Time Zone
+#
+#############
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+d-i clock-setup/ntp-server string ntp.ubuntu.com
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Central
+
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+#############
+#
+# Partitioning
+#
+#############
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+d-i partman-auto/method string lvm
+d-i partman-auto/disk string /dev/__DEVICE_NAME__
+
+# For LVM partitioning, you can select how much of the volume group to use
+# for logical volumes.
+d-i partman-auto-lvm/guided_size string max
+
+d-i partman-auto/choose_recipe select custompartitioning
+d-i partman-auto/expert_recipe string \
+      custompartitioning :: \
+              512 1 512 ext2                                  \
+                      $primary{ }                             \
+                      $bootable{ }                            \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext2 }    \
+                      label{ boot }                           \
+                      mountpoint{ /boot }                     \
+              .                                               \
+              1024 1 100% ext4                                \
+                      $primary{ }                             \
+                      method{ lvm }                           \
+                      device{ /dev/__DEVICE_NAME__2 }          \
+                      vg_name{ lxc }                          \
+              .                                               \
+              8192 1 8192 linux-swap                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ swap00 }                       \
+                      method{ swap } format{ }                \
+              .                                               \
+              153600 1 153600 ext4                            \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ openstack00 }                  \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ openstack00 }                    \
+                      mountpoint{ /openstack }                \
+              .                                               \
+              1024 1 1000000000 ext4                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ root00 }                       \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ root }                           \
+                      mountpoint{ / }                         \
+              .                                               \
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+#############
+#
+# Packages
+#
+#############
+
+# Package selection
+tasksel tasksel/first multiselect openssh-server
+
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+d-i pkgsel/upgrade select none
+d-i pkgsel/include string bridge-utils ethtool ifenslave lvm2 openssh-server python2.7 vim vlan
+# Policy for applying updates. May be "none" (no automatic updates),
+# "unattended-upgrades" (install security updates automatically), or
+# "landscape" (manage system with Landscape).
+d-i pkgsel/update-policy select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+popularity-contest popularity-contest/participate boolean false
+
+#############
+#
+# Users and Password
+#
+#############
+
+# Skip creation of a root account (normal user account will be able to
+# use sudo). The default is false; preseed this to true if you want to set
+# a root password.
+d-i passwd/root-login boolean true
+
+# Alternatively, to skip creation of a normal user account.
+d-i passwd/make-user boolean false
+
+# The installer will warn about weak passwords. If you are sure you know
+# what you're doing and want to override it, uncomment this.
+d-i user-setup/allow-password-weak boolean true
+
+# Root password, either in clear text
+d-i passwd/root-password password cobbler
+d-i passwd/root-password-again password cobbler
+
+#############
+#
+# Bootloader
+#
+#############
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+#############
+#
+# Post Install
+#
+#############
+
+# Command Line 1: Allow root to SSH.
+# Command Line 2: Cobbler overwrites sources.list with its own repos. Put the default Ubuntu sources.list back.
+# Command Line 3: Cobbler API call to turn off netboot.
+d-i preseed/late_command string \
+  wget http://$http_server/xenial-sources.list -O /target/etc/apt/sources.list; \
+  wget http://$http_server/osa-$hostname-bridges.cfg -O /target/etc/network/interfaces.d/osa-$hostname-bridges.cfg; \
+  wget http://$http_server/cblr/svc/op/nopxe/system/$system_name -O /dev/null; \
+  sed -i '/PermitRootLogin / s/ .*/ yes/' /target/etc/ssh/sshd_config; \
+  mkdir /target/root/.ssh; \
+  chmod 0700 /target/root/.ssh; \
+  echo "__SSHKEY__" >> /target/root/.ssh/authorized_keys; \
+  killall.sh || true; \
+  netcfg; \
+  echo -e '#!/bin/sh\n\nif ! grep -q "^source.*cfg$" /etc/network/interfaces; then echo "source /etc/network/interfaces.d/*.cfg" >> /etc/network/interfaces; fi' > /target/etc/network/if-pre-up.d/multi-nic; \
+  chmod +x /target/etc/network/if-pre-up.d/multi-nic
+
+
+#############
+#
+# Finish
+#
+#############
+
+# Reboot after the install is finished.
+finish-install finish-install/reboot_in_progress note
\ No newline at end of file
diff --git a/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-nova_compute.seed b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-nova_compute.seed
new file mode 100644
index 00000000..65e05b78
--- /dev/null
+++ b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-nova_compute.seed
@@ -0,0 +1,295 @@
+#
+# Ubuntu Server 16.04 Preseed
+#
+# Usage:
+#
+# This Ubuntu Preseed file is meant to be used with Cobbler. It has been
+# tested only on Cobbler 2.4.1. It is a completely unattended install.
+#
+# References:
+#
+# https://help.ubuntu.com/16.04/installation-guide/example-preseed.txt
+# http://www.claudiokuenzler.com/blog/513/debian-ubuntu-preseed-create-two-volume-groups-same-disk
+
+#############
+#
+# Kernel Options
+#
+#############
+
+# Use the following option to add additional boot parameters for the
+# installed system (if supported by the bootloader installer).
+# Note: options passed to the installer will be added automatically.
+d-i debian-installer/add-kernel-opts string $kernel_options_post
+d-i debian-installer/add-kernel-opts string biosdevname=0 net.ifnames=0
+#############
+#
+# Networking
+#
+#############
+
+#if "__DEFAULT_NETWORK__" in $interfaces
+    #set idata = $interfaces["__DEFAULT_NETWORK__"]
+    #set static = $idata['static']
+    #set ip_address = $idata.get("ip_address", "127.0.0.1")
+    #set netmask = $idata.get("netmask", "255.0.0.0")
+    #set gateway = $getVar('gateway','127.0.0.1')
+#end if
+
+d-i netcfg/choose_interface select __DEFAULT_NETWORK__
+d-i netcfg/dhcp_timeout string 60
+d-i netcfg/disable_autoconfig boolean true
+d-i netcfg/dhcp_failed note
+d-i netcfg/dhcp_options select Configure network manually
+
+#if $static
+# Static network configuration.
+d-i netcfg/get_ipaddress string $idata.get("ip_address", "127.0.0.1")
+d-i netcfg/get_netmask string $idata.get("netmask", "255.0.0.0")
+d-i netcfg/get_gateway string $gateway
+d-i netcfg/get_nameservers string $name_servers[0]
+d-i netcfg/confirm_static boolean true
+#end if
+
+d-i netcfg/get_hostname string $system_name
+d-i netcfg/get_domain string $hostname
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+
+#############
+#
+# Pre Install
+#
+#############
+
+# Command Line 1: This is necessary otherwise you will be prompted to umount /dev/__DEVICE_NAME__. See Ubuntu bug #1347726.
+d-i preseed/early_command string \
+      umount /media || true
+
+#############
+#
+# Net Image
+#
+#############
+
+# Required at least for 12.10+
+d-i live-installer/net-image string http://$http_server/cobbler/links/$distro_name/install/filesystem.squashfs
+
+#############
+#
+# Localization
+#
+#############
+
+d-i debian-installer/locale string en
+d-i debian-installer/country string US
+d-i debian-installer/locale string en_US.UTF-8
+d-i debian-installer/language string en
+
+#############
+#
+# Keyboard
+#
+#############
+
+# Disable automatic (interactive) keymap detection.
+d-i console-setup/ask_detect boolean false
+d-i console-setup/layoutcode string us
+d-i console-setup/variantcode string
+d-i keyboard-configuration/layoutcode string us
+
+#############
+#
+# Mirror
+#
+#############
+
+d-i mirror/country string manual
+d-i mirror/http/proxy string
+d-i mirror/http/hostname string $http_server
+d-i mirror/http/directory string $install_source_directory
+
+#############
+#
+# Clock and Time Zone
+#
+#############
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+d-i clock-setup/ntp-server string ntp.ubuntu.com
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Central
+
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+#############
+#
+# Partitioning
+#
+#############
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+d-i partman-auto/method string lvm
+d-i partman-auto/disk string /dev/__DEVICE_NAME__
+
+# For LVM partitioning, you can select how much of the volume group to use
+# for logical volumes.
+d-i partman-auto-lvm/guided_size string max
+
+d-i partman-auto/choose_recipe select custompartitioning
+d-i partman-auto/expert_recipe string \
+      custompartitioning :: \
+              512 1 512 ext2                                  \
+                      $primary{ }                             \
+                      $bootable{ }                            \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext2 }    \
+                      label{ boot }                           \
+                      mountpoint{ /boot }                     \
+              .                                               \
+              1024 1 100% ext4                                \
+                      $primary{ }                             \
+                      method{ lvm }                           \
+                      device{ /dev/__DEVICE_NAME__2 }          \
+                      vg_name{ lxc }                          \
+              .                                               \
+              8192 1 8192 linux-swap                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ swap00 }                       \
+                      method{ swap } format{ }                \
+              .                                               \
+              51200 1 51200 ext4                              \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ root00 }                       \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ root }                           \
+                      mountpoint{ / }                         \
+              .                                               \
+              76800 1 76800 ext4                              \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ openstack00 }                  \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ openstack00 }                    \
+                      mountpoint{ /openstack }                \
+              .                                               \
+              1024 1 1000000000 ext4                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ nova00 }                       \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ nova }                           \
+                      mountpoint{ /var/lib/nova }             \
+              .                                               \
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+#############
+#
+# Packages
+#
+#############
+
+# Package selection
+tasksel tasksel/first multiselect openssh-server
+
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+d-i pkgsel/upgrade select none
+d-i pkgsel/include string bridge-utils ethtool ifenslave lvm2 openssh-server python2.7 vim vlan
+# Policy for applying updates. May be "none" (no automatic updates),
+# "unattended-upgrades" (install security updates automatically), or
+# "landscape" (manage system with Landscape).
+d-i pkgsel/update-policy select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+popularity-contest popularity-contest/participate boolean false
+
+#############
+#
+# Users and Password
+#
+#############
+
+# Skip creation of a root account (normal user account will be able to
+# use sudo). The default is false; preseed this to true if you want to set
+# a root password.
+d-i passwd/root-login boolean true
+
+# Alternatively, to skip creation of a normal user account.
+d-i passwd/make-user boolean false
+
+# The installer will warn about weak passwords. If you are sure you know
+# what you're doing and want to override it, uncomment this.
+d-i user-setup/allow-password-weak boolean true
+
+# Root password, either in clear text
+d-i passwd/root-password password cobbler
+d-i passwd/root-password-again password cobbler
+
+#############
+#
+# Bootloader
+#
+#############
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+#############
+#
+# Post Install
+#
+#############
+
+# Command Line 1: Allow root to SSH.
+# Command Line 2: Cobbler overwrites sources.list with its own repos. Put the default Ubuntu sources.list back.
+# Command Line 3: Cobbler API call to turn off netboot.
+d-i preseed/late_command string \
+  wget http://$http_server/xenial-sources.list -O /target/etc/apt/sources.list; \
+  wget http://$http_server/osa-$hostname-bridges.cfg -O /target/etc/network/interfaces.d/osa-$hostname-bridges.cfg; \
+  wget http://$http_server/cblr/svc/op/nopxe/system/$system_name -O /dev/null; \
+  sed -i '/PermitRootLogin / s/ .*/ yes/' /target/etc/ssh/sshd_config; \
+  mkdir /target/root/.ssh; \
+  chmod 0700 /target/root/.ssh; \
+  echo "__SSHKEY__" >> /target/root/.ssh/authorized_keys; \
+  killall.sh || true; \
+  netcfg; \
+  echo -e '#!/bin/sh\n\nif ! grep -q "^source.*cfg$" /etc/network/interfaces; then echo "source /etc/network/interfaces.d/*.cfg" >> /etc/network/interfaces; fi' > /target/etc/network/if-pre-up.d/multi-nic; \
+  chmod +x /target/etc/network/if-pre-up.d/multi-nic
+
+
+#############
+#
+# Finish
+#
+#############
+
+# Reboot after the install is finished.
+finish-install finish-install/reboot_in_progress note
\ No newline at end of file
diff --git a/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-swift.seed b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-swift.seed
new file mode 100644
index 00000000..ddd9e945
--- /dev/null
+++ b/multi-node-aio/templates/pre-seeds/ubuntu-server-16.04-unattended-cobbler-swift.seed
@@ -0,0 +1,312 @@
+#
+# Ubuntu Server 16.04 Preseed
+#
+# Usage:
+#
+# This Ubuntu Preseed file is meant to be used with Cobbler. It has been
+# tested only on Cobbler 2.4.1. It is a completely unattended install.
+#
+# References:
+#
+# https://help.ubuntu.com/16.04/installation-guide/example-preseed.txt
+# http://www.claudiokuenzler.com/blog/513/debian-ubuntu-preseed-create-two-volume-groups-same-disk
+
+#############
+#
+# Kernel Options
+#
+#############
+
+# Use the following option to add additional boot parameters for the
+# installed system (if supported by the bootloader installer).
+# Note: options passed to the installer will be added automatically.
+d-i debian-installer/add-kernel-opts string $kernel_options_post
+d-i debian-installer/add-kernel-opts string biosdevname=0 net.ifnames=0
+#############
+#
+# Networking
+#
+#############
+
+#if "__DEFAULT_NETWORK__" in $interfaces
+    #set idata = $interfaces["__DEFAULT_NETWORK__"]
+    #set static = $idata['static']
+    #set ip_address = $idata.get("ip_address", "127.0.0.1")
+    #set netmask = $idata.get("netmask", "255.0.0.0")
+    #set gateway = $getVar('gateway','127.0.0.1')
+#end if
+
+d-i netcfg/choose_interface select __DEFAULT_NETWORK__
+d-i netcfg/dhcp_timeout string 60
+d-i netcfg/disable_autoconfig boolean true
+d-i netcfg/dhcp_failed note
+d-i netcfg/dhcp_options select Configure network manually
+
+#if $static
+# Static network configuration.
+d-i netcfg/get_ipaddress string $idata.get("ip_address", "127.0.0.1")
+d-i netcfg/get_netmask string $idata.get("netmask", "255.0.0.0")
+d-i netcfg/get_gateway string $gateway
+d-i netcfg/get_nameservers string $name_servers[0]
+d-i netcfg/confirm_static boolean true
+#end if
+
+d-i netcfg/get_hostname string $system_name
+d-i netcfg/get_domain string $hostname
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+
+#############
+#
+# Pre Install
+#
+#############
+
+# Command Line 1: This is necessary otherwise you will be prompted to umount /dev/__DEVICE_NAME__. See Ubuntu bug #1347726.
+d-i preseed/early_command string \
+      umount /media || true
+
+#############
+#
+# Net Image
+#
+#############
+
+# Required at least for 12.10+
+d-i live-installer/net-image string http://$http_server/cobbler/links/$distro_name/install/filesystem.squashfs
+
+#############
+#
+# Localization
+#
+#############
+
+d-i debian-installer/locale string en
+d-i debian-installer/country string US
+d-i debian-installer/locale string en_US.UTF-8
+d-i debian-installer/language string en
+
+#############
+#
+# Keyboard
+#
+#############
+
+# Disable automatic (interactive) keymap detection.
+d-i console-setup/ask_detect boolean false
+d-i console-setup/layoutcode string us
+d-i console-setup/variantcode string
+d-i keyboard-configuration/layoutcode string us
+
+#############
+#
+# Mirror
+#
+#############
+
+d-i mirror/country string manual
+d-i mirror/http/proxy string
+d-i mirror/http/hostname string $http_server
+d-i mirror/http/directory string $install_source_directory
+
+#############
+#
+# Clock and Time Zone
+#
+#############
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+d-i clock-setup/ntp-server string ntp.ubuntu.com
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Central
+
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+#############
+#
+# Partitioning
+#
+#############
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+d-i partman-auto/method string lvm
+d-i partman-auto/disk string /dev/__DEVICE_NAME__
+
+# For LVM partitioning, you can select how much of the volume group to use
+# for logical volumes.
+d-i partman-auto-lvm/guided_size string max
+
+d-i partman-auto/choose_recipe select custompartitioning
+d-i partman-auto/expert_recipe string \
+      custompartitioning :: \
+              512 1 512 ext2                                  \
+                      $primary{ }                             \
+                      $bootable{ }                            \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext2 }    \
+                      label{ boot }                           \
+                      mountpoint{ /boot }                     \
+              .                                               \
+              1024 1 100% ext4                                 \
+                      $primary{ }                             \
+                      method{ lvm }                           \
+                      device{ /dev/__DEVICE_NAME__2 }          \
+                      vg_name{ lxc }                          \
+              .                                               \
+              8192 1 8192 linux-swap                          \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ swap00 }                       \
+                      method{ swap } format{ }                \
+              .                                               \
+              51200 1 51200 ext4                              \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ root00 }                       \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ root }                           \
+                      mountpoint{ / }                         \
+              .                                               \
+              20480 1 20480 xfs                               \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ swift01 }                      \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ xfs }     \
+                      label{ openstack00 }                    \
+                      mountpoint{ /srv/disk1 }                \
+              .                                               \
+              20480 1 20480 xfs                               \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ swift02 }                      \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ xfs }     \
+                      label{ openstack00 }                    \
+                      mountpoint{ /srv/disk2 }                \
+              .                                               \
+              20480 1 20480 xfs                               \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ swift03 }                      \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ xfs }     \
+                      label{ openstack00 }                    \
+                      mountpoint{ /srv/disk3 }                \
+              .                                               \
+              76800 1 76800 ext4                              \
+                      $lvmok{ } in_vg{ lxc }                  \
+                      lv_name{ openstack00 }                  \
+                      method{ format } format{ }              \
+                      use_filesystem{ } filesystem{ ext4 }    \
+                      label{ openstack00 }                    \
+                      mountpoint{ /openstack }                \
+              .                                               \
+
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+#############
+#
+# Packages
+#
+#############
+
+# Package selection
+tasksel tasksel/first multiselect openssh-server
+
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+d-i pkgsel/upgrade select none
+d-i pkgsel/include string bridge-utils ethtool ifenslave lvm2 openssh-server python2.7 vim vlan xfsprogs
+# Policy for applying updates. May be "none" (no automatic updates),
+# "unattended-upgrades" (install security updates automatically), or
+# "landscape" (manage system with Landscape).
+d-i pkgsel/update-policy select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+popularity-contest popularity-contest/participate boolean false
+
+#############
+#
+# Users and Password
+#
+#############
+
+# Skip creation of a root account (normal user account will be able to
+# use sudo). The default is false; preseed this to true if you want to set
+# a root password.
+d-i passwd/root-login boolean true
+
+# Alternatively, to skip creation of a normal user account.
+d-i passwd/make-user boolean false
+
+# The installer will warn about weak passwords. If you are sure you know
+# what you're doing and want to override it, uncomment this.
+d-i user-setup/allow-password-weak boolean true
+
+# Root password, either in clear text
+d-i passwd/root-password password cobbler
+d-i passwd/root-password-again password cobbler
+
+#############
+#
+# Bootloader
+#
+#############
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+#############
+#
+# Post Install
+#
+#############
+
+# Command Line 1: Allow root to SSH.
+# Command Line 2: Cobbler overwrites sources.list with its own repos. Put the default Ubuntu sources.list back.
+# Command Line 3: Cobbler API call to turn off netboot.
+d-i preseed/late_command string \
+  wget http://$http_server/xenial-sources.list -O /target/etc/apt/sources.list; \
+  wget http://$http_server/osa-$hostname-bridges.cfg -O /target/etc/network/interfaces.d/osa-$hostname-bridges.cfg; \
+  wget http://$http_server/cblr/svc/op/nopxe/system/$system_name -O /dev/null; \
+  sed -i '/PermitRootLogin / s/ .*/ yes/' /target/etc/ssh/sshd_config; \
+  mkdir /target/root/.ssh; \
+  chmod 0700 /target/root/.ssh; \
+  echo "__SSHKEY__" >> /target/root/.ssh/authorized_keys; \
+  killall.sh || true; \
+  netcfg; \
+  echo -e '#!/bin/sh\n\nif ! grep -q "^source.*cfg$" /etc/network/interfaces; then echo "source /etc/network/interfaces.d/*.cfg" >> /etc/network/interfaces; fi' > /target/etc/network/if-pre-up.d/multi-nic; \
+  chmod +x /target/etc/network/if-pre-up.d/multi-nic
+
+
+#############
+#
+# Finish
+#
+#############
+
+# Reboot after the install is finished.
+finish-install finish-install/reboot_in_progress note
\ No newline at end of file
diff --git a/multi-node-aio/templates/xenial-sources.list b/multi-node-aio/templates/xenial-sources.list
new file mode 100644
index 00000000..5c46164c
--- /dev/null
+++ b/multi-node-aio/templates/xenial-sources.list
@@ -0,0 +1,20 @@
+deb http://archive.ubuntu.com/ubuntu xenial main restricted
+deb-src http://archive.ubuntu.com/ubuntu xenial main restricted
+deb http://archive.ubuntu.com/ubuntu xenial-updates main restricted
+deb-src http://archive.ubuntu.com/ubuntu xenial-updates main restricted
+deb http://archive.ubuntu.com/ubuntu xenial universe
+deb-src http://archive.ubuntu.com/ubuntu xenial universe
+deb http://archive.ubuntu.com/ubuntu xenial-updates universe
+deb-src http://archive.ubuntu.com/ubuntu xenial-updates universe
+deb http://archive.ubuntu.com/ubuntu xenial multiverse
+deb-src http://archive.ubuntu.com/ubuntu xenial multiverse
+deb http://archive.ubuntu.com/ubuntu xenial-updates multiverse
+deb-src http://archive.ubuntu.com/ubuntu xenial-updates multiverse
+deb http://archive.ubuntu.com/ubuntu xenial-backports main restricted universe multiverse
+deb-src http://archive.ubuntu.com/ubuntu xenial-backports main restricted universe multiverse
+deb http://security.ubuntu.com/ubuntu xenial-security main restricted
+deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted
+deb http://security.ubuntu.com/ubuntu xenial-security universe
+deb-src http://security.ubuntu.com/ubuntu xenial-security universe
+deb http://security.ubuntu.com/ubuntu xenial-security multiverse
+deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse
\ No newline at end of file