Merge "Allow to supply custom kibana backend to roles"

elk_metrics_7x/roles/elastic_apm_server/defaults/main.yml

@@ -17,3 +17,6 @@
 apm_interface: 0.0.0.0
 apm_port: 8200
 apm_token: SuperSecrete
+# Manually define Kibana targets.
+# Default: hosts from Ansible `kibana` group will be used
+apm_kibana_target: "{{ kibana_target | default('') }}"

elk_metrics_7x/roles/elastic_apm_server/templates/apm-server.yml.j2

@@ -258,56 +258,10 @@ apm-server:
   # Specify cache key expiration via this setting. Default is 30 seconds.
   #agent.config.cache.expiration: 30s
 
-{% if (groups['kibana'] | length) > 0 %}
+{% if apm_kibana_target %}
-  kibana:
+{{ elk_macros.setup_kibana(apm_kibana_target) }}
-    # For APM Agent configuration in Kibana, enabled must be true.
+{% elif (groups['kibana'] | length) > 0 %}
-    enabled: true
+{{ elk_macros.setup_kibana(hostvars[groups['kibana'][0]]['ansible_host'] ~ ':' ~ kibana_port) }}
-
-    # Scheme and port can be left out and will be set to the default (`http` and `5601`).
-    # In case you specify an additional path, the scheme is required: `http://localhost:5601/path`.
-    # IPv6 addresses should always be defined as: `https://[2001:db8::1]:5601`.
-    host: {{ hostvars[groups['kibana'][0]]['ansible_host'] ~ ':' ~ kibana_port }}
-
-    # Optional protocol and basic auth credentials.
-    #protocol: "https"
-    #username: "elastic"
-    #password: "changeme"
-
-    # Optional HTTP path.
-    #path: ""
-
-    # Enable custom SSL settings. Set to false to ignore custom SSL settings for secure communication.
-    #ssl.enabled: true
-
-    # Optional SSL configuration options. SSL is off by default, change the `protocol` option if you want to enable `https`.
-    # Configure SSL verification mode. If `none` is configured, all server hosts
-    # and certificates will be accepted. In this mode, SSL based connections are
-    # susceptible to man-in-the-middle attacks. Use only for testing. Default is
-    # `full`.
-    #ssl.verification_mode: full
-
-    # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
-    # 1.2 are enabled.
-    #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]
-
-    # List of root certificates for HTTPS server verifications.
-    #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
-
-    # Certificate for SSL client authentication.
-    #ssl.certificate: "/etc/pki/client/cert.pem"
-
-    # Client Certificate Key
-    #ssl.key: "/etc/pki/client/cert.key"
-
-    # Optional passphrase for decrypting the Certificate Key.
-    # It is recommended to use the provided keystore instead of entering the passphrase in plain text.
-    #ssl.key_passphrase: ''
-
-    # Configure cipher suites to be used for SSL connections.
-    #ssl.cipher_suites: []
-
-    # Configure curve types for ECDHE based cipher suites.
-    #ssl.curve_types: []
 {% endif %}
   #---------------------------- APM Server - ILM Index Lifecycle Management ----------------------------
 

elk_metrics_7x/roles/elastic_auditbeat/defaults/main.yml

@@ -20,6 +20,10 @@ auditbeat_ilm_policy_template: "auditbeat-{{ beat_version }}"
 auditbeat_ilm_policy_filename: "auditbeat-ilm-policy.json"
 auditbeat_ilm_policy_file_location: "/etc/auditbeat"
 
+# Manually define Kibana targets.
+# Default: hosts from Ansible `kibana` group will be used
+auditbeat_kibana_target: "{{ kibana_target | default('') }}"
+
 ilm_policy_name: "{{ auditbeat_ilm_policy_name | default('') }}"
 ilm_policy: "{{ (auditbeat_ilm_policy | default(default_ilm_policy)) | default({}) }}"
 ilm_policy_template: "{{ auditbeat_ilm_policy_template | default('') }}"

elk_metrics_7x/roles/elastic_auditbeat/templates/auditbeat.yml.j2

@@ -1146,7 +1146,9 @@ setup.ilm.policy_file: "{{ ilm_policy_file_location }}/{{ ilm_policy_filename }}
 
 # =================================== Kibana ===================================
 
-{% if (groups['kibana'] | length) > 0 %}
+{% if auditbeat_kibana_target %}
+{{ elk_macros.setup_kibana(auditbeat_kibana_target) }}
+{% elif (groups['kibana'] | length) > 0 %}
 {{ elk_macros.setup_kibana(hostvars[groups['kibana'][0]]['ansible_host'] ~ ':' ~ kibana_port) }}
 {% endif %}
 

elk_metrics_7x/roles/elastic_filebeat/defaults/main.yml

@@ -295,6 +295,10 @@ filebeat_ilm_policy_template: "filebeat-{{ beat_version }}"
 filebeat_ilm_policy_filename: "filebeat-ilm-policy.json"
 filebeat_ilm_policy_file_location: "/etc/filebeat"
 
+# Manually define Kibana targets.
+# Default: hosts from Ansible `kibana` group will be used
+filebeat_kibana_target: "{{ kibana_target | default('') }}"
+
 ilm_policy_name: "{{ filebeat_ilm_policy_name | default('') }}"
 ilm_policy: "{{ (filebeat_ilm_policy | default(default_ilm_policy)) | default({}) }}"
 ilm_policy_template: "{{ filebeat_ilm_policy_template | default('') }}"

elk_metrics_7x/roles/elastic_filebeat/templates/filebeat.yml.j2

@@ -2039,7 +2039,9 @@ setup.ilm.policy_file: "{{ ilm_policy_file_location }}/{{ ilm_policy_filename }}
 
 # =================================== Kibana ===================================
 
-{% if (groups['kibana'] | length) > 0 %}
+{% if filebeat_kibana_target %}
+{{ elk_macros.setup_kibana(filebeat_kibana_target) }}
+{% elif (groups['kibana'] | length) > 0 %}
 {{ elk_macros.setup_kibana(hostvars[groups['kibana'][0]]['ansible_host'] ~ ':' ~ kibana_port) }}
 {% endif %}
 

elk_metrics_7x/roles/elastic_heartbeat/defaults/main.yml

@@ -16,10 +16,14 @@
 heartbeat_service_state: restarted
 
 heartbeat_ilm_policy_name: "heartbeat-{{ beat_version }}"
-heartbeat_ilm_policy_template: "heartbeat-{{ beat_version}}"
+heartbeat_ilm_policy_template: "heartbeat-{{ beat_version }}"
 heartbeat_ilm_policy_filename: "heartbeat-ilm-policy.json"
 heartbeat_ilm_policy_file_location: "/etc/heartbeat"
 
+# Manually define Kibana targets.
+# Default: hosts from Ansible `kibana` group will be used
+heartbeat_kibana_target: "{{ kibana_target | default('') }}"
+
 ilm_policy_name: "{{ heartbeat_ilm_policy_name | default('') }}"
 ilm_policy: "{{ (heartbeat_ilm_policy | default(default_ilm_policy)) | default({}) }}"
 ilm_policy_template: "{{ heartbeat_ilm_policy_template | default('') }}"

elk_metrics_7x/roles/elastic_heartbeat/templates/heartbeat.yml.j2

@@ -1273,7 +1273,9 @@ setup.ilm.policy_file: "{{ ilm_policy_file_location }}/{{ ilm_policy_filename }}
 
 # =================================== Kibana ===================================
 
-{% if (groups['kibana'] | length) > 0 %}
+{% if heartbeat_kibana_target %}
+{{ elk_macros.setup_kibana(heartbeat_kibana_target) }}
+{% elif (groups['kibana'] | length) > 0 %}
 {{ elk_macros.setup_kibana(hostvars[groups['kibana'][0]]['ansible_host'] ~ ':' ~ kibana_port) }}
 {% endif %}
 

elk_metrics_7x/roles/elastic_journalbeat/defaults/main.yml

@@ -20,6 +20,10 @@ journalbeat_ilm_policy_template: "journalbeat-{{ beat_version }}"
 journalbeat_ilm_policy_filename: "journalbeat-ilm-policy.json"
 journalbeat_ilm_policy_file_location: "/etc/journalbeat"
 
+# Manually define Kibana targets.
+# Default: hosts from Ansible `kibana` group will be used
+journalbeat_kibana_target: "{{ kibana_target | default('') }}"
+
 ilm_policy_name: "{{ journalbeat_ilm_policy_name | default('') }}"
 ilm_policy: "{{ (journalbeat_ilm_policy | default(default_ilm_policy)) | default({}) }}"
 ilm_policy_template: "{{ journalbeat_ilm_policy_template | default('') }}"

elk_metrics_7x/roles/elastic_journalbeat/templates/journalbeat.yml.j2

@@ -1010,7 +1010,9 @@ setup.ilm.policy_file: "{{ ilm_policy_file_location }}/{{ ilm_policy_filename }}
 
 # =================================== Kibana ===================================
 
-{% if (groups['kibana'] | length) > 0 %}
+{% if journalbeat_kibana_target %}
+{{ elk_macros.setup_kibana(journalbeat_kibana_target) }}
+{% elif (groups['kibana'] | length) > 0 %}
 {{ elk_macros.setup_kibana(hostvars[groups['kibana'][0]]['ansible_host'] ~ ':' ~ kibana_port) }}
 {% endif %}
 

elk_metrics_7x/roles/elastic_metricbeat/defaults/main.yml

@@ -26,6 +26,10 @@ ceph_metricbeat_group: cinder_volume
 # Include default kibana dashboards
 setup_kibana_dashboards: true
 
+# Manually define Kibana targets.
+# Default: hosts from Ansible `kibana` group will be used
+metricbeat_kibana_target: "{{ kibana_target | default('') }}"
+
 metricbeat_ilm_policy_name: "metricbeat-{{ beat_version }}"
 metricbeat_ilm_policy_template: "metricbeat-{{ beat_version }}"
 metricbeat_ilm_policy_filename: "metricbeat-ilm-policy.json"

elk_metrics_7x/roles/elastic_metricbeat/templates/metricbeat.yml.j2

@@ -1907,7 +1907,9 @@ setup.ilm.policy_file: "{{ ilm_policy_file_location }}/{{ ilm_policy_filename }}
 
 # =================================== Kibana ===================================
 
-{% if (groups['kibana'] | length) > 0 and (setup_kibana_dashboards | default(true)) %}
+{% if metricbeat_kibana_target %}
+{{ elk_macros.setup_kibana(metricbeat_kibana_target) }}
+{% elif (groups['kibana'] | length) > 0 and (setup_kibana_dashboards | default(true)) %}
 {{ elk_macros.setup_kibana(hostvars[groups['kibana'][0]]['ansible_host'] ~ ':' ~ kibana_port) }}
 {% endif %}
 

elk_metrics_7x/roles/elastic_packetbeat/defaults/main.yml

@@ -20,6 +20,10 @@ packetbeat_ilm_policy_template: "packetbeat-{{ beat_version }}"
 packetbeat_ilm_policy_filename: "packetbeat-ilm-policy.json"
 packetbeat_ilm_policy_file_location: "/etc/packetbeat"
 
+# Manually define Kibana targets.
+# Default: hosts from Ansible `kibana` group will be used
+packetbeat_kibana_target: "{{ kibana_target | default('') }}"
+
 ilm_policy_name: "{{ packetbeat_ilm_policy_name | default('') }}"
 ilm_policy: "{{ (packetbeat_ilm_policy | default(default_ilm_policy)) | default({}) }}"
 ilm_policy_template: "{{ packetbeat_ilm_policy_template | default('') }}"

elk_metrics_7x/roles/elastic_packetbeat/templates/packetbeat.yml.j2

@@ -1569,7 +1569,9 @@ setup.ilm.policy_file: "{{ ilm_policy_file_location }}/{{ ilm_policy_filename }}
 
 # =================================== Kibana ===================================
 
-{% if (groups['kibana'] | length) > 0 %}
+{% if packetbeat_kibana_target %}
+{{ elk_macros.setup_kibana(packetbeat_kibana_target) }}
+{% elif (groups['kibana'] | length) > 0 %}
 {{ elk_macros.setup_kibana(hostvars[groups['kibana'][0]]['ansible_host'] ~ ':' ~ kibana_port) }}
 {% endif %}