openstack-ansible-ops/multi-node-aio/playbooks/setup-host.yml

---
# Copyright 2018, Rackspace US, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in witing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

- name: Gather facts
  hosts: vm_hosts
  gather_facts: "{{ gather_facts | default(true) }}"
  environment: "{{ deployment_environment_variables | default({}) }}"
  tags:
    - setup-host
  tasks:
    - name: Check for a supported Operating System
      assert:
        that:
          - (ansible_distribution == 'Ubuntu' and ansible_distribution_release == 'xenial') or
            (ansible_distribution == 'Ubuntu' and ansible_distribution_release == 'bionic')
        msg: >-
          The only supported host platforms for this tooling are Ubuntu 16.04 LTS (Xenial)
          and Ubuntu 18.04 LTS (Bionic). Patches to add support for other distributions are
          most welcome.          

    - name: Gather variables for each operating system
      include_vars: "{{ item }}"
      with_first_found:
        - "{{ playbook_dir }}/vars/{{ ansible_distribution | lower }}-{{ ansible_distribution_version | lower }}.yml"
        - "{{ playbook_dir }}/vars/{{ ansible_distribution | lower }}-{{ ansible_distribution_major_version | lower }}.yml"
        - "{{ playbook_dir }}/vars/{{ ansible_os_family | lower }}-{{ ansible_distribution_major_version | lower }}.yml"
        - "{{ playbook_dir }}/vars/{{ ansible_distribution | lower }}.yml"
        - "{{ playbook_dir }}/vars/{{ ansible_os_family | lower }}.yml"
      tags:
        - always

    - name: Install pre-requisite host distro packages
      package:
        name: "{{ mnaio_host_required_distro_packages }}"
        state: "latest"
        update_cache: yes
        cache_valid_time: 600
      register: _install_required_host_packages
      until: _install_required_host_packages is success
      retries: 3
      delay: 15
      when:
        - "mnaio_host_required_distro_packages | length > 0"

    - name: Add/Remove/Update apt repositories
      apt_repository:
        repo: "{{ repo.repo }}"
        state: "{{ repo.state | default('present') }}"
        filename: "{{ repo.filename | default(omit) }}"
        update_cache: no
      with_items: "{{ mnaio_host_package_repos }}"
      loop_control:
        loop_var: repo
      register: _add_apt_repo
      when:
        - "ansible_os_family == 'Debian'"
        - "mnaio_host_package_repos | length > 0"
        - "(repo.condition | default(True)) | bool"

    - name: Update apt cache
      apt:
        update_cache: yes
      register: _update_apt_cache
      until: _update_apt_cache is success
      retries: 3
      delay: 15
      when:
        - "ansible_os_family == 'Debian'"
        - "_add_apt_repo is changed"

    - name: Install host distro packages
      package:
        name: "{{ mnaio_host_distro_packages }}"
        state: "latest"
        update_cache: yes
        cache_valid_time: 600
      register: _install_host_packages
      until: _install_host_packages is success
      retries: 3
      delay: 15

    - name: Get version of libguestfs
      shell: >-
        guestfish --version | awk '{print $2}'        
      changed_when: false
      register: _libguestfs_version

    # See:
    # https://bugzilla.redhat.com/show_bug.cgi?id=1591617
    # https://bugs.launchpad.net/ubuntu/+source/libguestfs/+bug/1615337
    # Exit codes:
    # 0 - Fix already enabled
    # 1 - Error
    # 2 - Fix enabled by task (should show task as changed)
    - name: Apply workaround for older versions to make guestfish work
      shell: |
        set -e
        TEST_FILE_PATH='/usr/lib/x86_64-linux-gnu/guestfs/supermin.d/zz-dash-packages'
        if [[ ! -e ${TEST_FILE_PATH} ]] || ! grep -q dash ${TEST_FILE_PATH}; then
          echo dash > ${TEST_FILE_PATH}
          rm -rf /var/tmp/.guestfs*
          exit 2
        fi        
      args:
        executable: /bin/bash
      when:
        - (_libguestfs_version.stdout is version('1.38.1', '<')) or
          ((_libguestfs_version.stdout is version('1.39.0', '>=')) and
           (_libguestfs_version.stdout is version('1.39.1', '<')))
      register: _libguestfs_fix
      changed_when: _libguestfs_fix.rc == 2
      failed_when: _libguestfs_fix.rc not in [0, 2]

    # If the host had already installed kvm_intel.ko without nested=1, then
    # re-load it now, honoring whatever is in qemu-system-x86.modprobe
    # Exit codes:
    # 0 - Nested virt already enabled
    # 1 - Error
    # 2 - Nested virt enabled by task (should show task as changed)
    # 3 - Nested virt not available
    - name: Ensure that nested virtualization is enabled (if it is available)
      shell: |
        set -e
        INTEL_NESTED=/sys/module/kvm_intel/parameters/nested
        if grep -q kvm_intel /proc/modules; then
          echo "Intel CPU found. Checking for nested virtualization capabilities."
          if [ -f ${INTEL_NESTED} ]; then
            echo "Nested virtualization capability found. Checking if it is enabled."
            v=$(cat ${INTEL_NESTED})
            if [ "x${v}" != "xY" ]; then
              echo "Nested virtualization not enabled. Enabling it now."
              rmmod kvm_intel && modprobe kvm_intel
              exit 2
            else
              echo "Nested virtualization already enabled."
            fi
          else
            echo "Nested virtualization capability not found."
            exit 3
          fi
        else
          echo "Intel CPU not found."
          exit 3
        fi        
      args:
        executable: /bin/bash
      register: _enable_nested_virt
      changed_when: _enable_nested_virt.rc == 2
      failed_when: _enable_nested_virt.rc not in [0, 2, 3]

    - name: Ensure root has a .ssh directory
      file:
        path: /root/.ssh
        state: directory
        owner: root
        group: root
        mode: 0700

    - name: Create ssh key pair for root
      user:
        name: root
        generate_ssh_key: yes
        ssh_key_bits: 2048
        ssh_key_file: /root/.ssh/id_rsa

    - name: Get root public key
      command: cat /root/.ssh/id_rsa.pub
      register: public_key_get
      changed_when: false

    - name: Set key facts
      set_fact:
        root_public_key: "{{ public_key_get.stdout }}"

    - name: Ensure root can ssh to localhost
      authorized_key:
        user: "root"
        key: "{{ root_public_key }}"

    - name: Setup SSH client to disable strict host key checks
      lineinfile:
        path: /etc/ssh/ssh_config
        regexp: "^.*StrictHostKeyChecking.*$"
        line: "    StrictHostKeyChecking no"
        insertafter: "^Host \\*$"
        state: present

    - name: Setup SSH client to have a non-persistant known hosts file
      lineinfile:
        path: /etc/ssh/ssh_config
        regexp: "^.*UserKnownHostsFile.*$"
        line: "    UserKnownHostsFile=/dev/null"
        insertafter: "^Host \\*$"
        state: present

    - name: Setup SSH client to disable DNS host key checks
      lineinfile:
        path: /etc/ssh/ssh_config
        regexp: "^.*VerifyHostKeyDNS.*$"
        line: "    VerifyHostKeyDNS no"
        insertafter: "^Host \\*$"
        state: present

    - name: Add sysctl options
      sysctl:
        name: net.ipv4.ip_forward
        value: 1
        sysctl_set: yes
        state: present
        reload: yes
        sysctl_file: /etc/sysctl.conf

    - name: Get gateway interface
      shell: "/sbin/ip r g 1 | awk '{print $5}'"
      register: gw_iface

    - set_fact:
        masquerade_interface: "{{ gw_iface.stdout.strip() }}"

    - name: Add IPtables rules
      iptables:
        table: "{{ item.table | default(omit) }}"
        chain: "{{ item.chain | default(omit) }}"
        in_interface: "{{ item.in_interface | default(omit) }}"
        out_interface: "{{ item.out_interface | default(omit) }}"
        source: "{{ item.source | default(omit) }}"
        destination: "{{ item.destination | default(omit) }}"
        protocol: "{{ item.protocol | default(omit) }}"
        match: "{{ item.match | default(omit) }}"
        destination_port: "{{ item.destination_port | default(omit) }}"
        jump: "{{ item.jump | default(omit) }}"
        to_ports: "{{ item.to_ports | default(omit) }}"
      with_items: "{{ mnaio_host_iptables_rules }}"

    # These rules are added manually due to bugs in the iptables module.
    - name: Add IPtables rules
      shell: |
        if ! iptables -w -t {{ item.table }} -C {{ item.rule }};then
          iptables -w -t {{ item.table }} -I {{ item.rule }}
        fi        
      with_items:
        - table: 'nat'
          rule: 'POSTROUTING -s 10.0.2.0/22 ! -d 10.0.2.0/22 -j MASQUERADE'
        - table: 'mangle'
          rule: 'POSTROUTING -s 10.0.2.0/22 -o vm-br-dhcp -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill'
        - table: 'mangle'
          rule: 'POSTROUTING -s 10.0.2.0/22 -o vm-br-dhcp -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill'

    - name: Add IPtables pre-routing rules to allow external access to VMs
      shell: |
        if ! iptables -w -t nat -C PREROUTING -p tcp -d {{ ansible_default_ipv4.address }} --dport {{ item.host_port }} -j DNAT --to {{ item.vm_ip }}:{{ item.vm_port }};then
          iptables -w -t nat -I PREROUTING -p tcp -d {{ ansible_default_ipv4.address }} --dport {{ item.host_port }} -j DNAT --to {{ item.vm_ip }}:{{ item.vm_port }}
        fi        
      with_items: "{{ mnaio_host_iptables_prerouting_ports }}"
      when: config_prerouting | default(false) | bool

    - name: Start netfilter persistent
      service:
        name: "{{ mnaio_host_iptables_service }}"
        state: started
        enabled: yes
      when:
        - ansible_distribution | lower == 'ubuntu'

    - name: Deploy systemd-networkd bridge devices
      template:
        src: "mnaio_host/systemd-networkd-bridges-netdev.j2"
        dest: /etc/systemd/network/{{ item.value.iface }}.netdev
        mode: "0644"
        owner: root
        group: root
      with_dict:
        - "{{ mnaio_host_networks }}"
      register: mnaio_bridges

    - name: Deploy systemd-networkd bridge networks
      template:
        src: "mnaio_host/systemd-networkd-bridges-network.j2"
        dest: /etc/systemd/network/{{ item.value.iface }}.network
        mode: "0644"
        owner: root
        group: root
      with_dict:
        - "{{ mnaio_host_networks }}"
      register: mnaio_bridges

    - name: Restart the systemd-networkd daemon to load new networks
      systemd:
        name: systemd-networkd
        daemon_reload: yes
        state: restarted
      when:
        - mnaio_bridges is changed

    - name: Disable default virt network
      virt_net:
        name: "default"
        state: inactive

    - name: Prevent default virt network autostart
      virt_net:
        name: "default"
        autostart: no

    - name: Define virt network(s)
      virt_net:
        name: "{{ item.value.iface }}"
        state: present
        xml: "{{ lookup('template', 'kvm/libvirt-network-template.xml.j2') }}"
      with_dict: "{{ mnaio_host_networks }}"

    - name: Set virt network(s) to active
      virt_net:
        name: "{{ item.value.iface }}"
        state: active
      with_dict: "{{ mnaio_host_networks }}"

    - name: Set virt network(s) to autostart
      virt_net:
        name: "{{ item.value.iface }}"
        autostart: yes
      with_dict: "{{ mnaio_host_networks }}"

    - name: If mnaio_data_disk is not set, discover and set it if possible
      when:
        - mnaio_data_disk is undefined
      block:
        - name: Locate the largest writable data disk if mnaio_data_disk is not set
          shell: >
            lsblk -brndo NAME,TYPE,FSTYPE,RO,SIZE | awk '/d[b-z]+ disk +0/{ if ($4>m){m=$4; d=$1}}; END{print d}'            
          register: lsblk
          changed_when: false

        - name: Set mnaio_data_disk fact if a suitable disk was found
          set_fact:
            mnaio_data_disk: "{{ lsblk.stdout | trim }}"
          when:
            - lsblk.stdout | trim != ''

    - name: Setup the data disk if one was set or found
      when:
        - mnaio_data_disk is defined
      block:
        - name: Setup the data disk partition
          parted:
            device: "/dev/{{ mnaio_data_disk }}"
            label: gpt
            number: 1
            name: data1
            state: present
          register: _add_partition

        - name: Prepare the data disk file system
          filesystem:
            fstype: ext4
            dev: "/dev/{{ mnaio_data_disk }}{{ mnaio_data_disk_suffix | default('1') }}"
            force: yes
          when:
            - _add_partition is changed

        - name: Mount the data disk
          mount:
            src: "/dev/{{ mnaio_data_disk }}{{ mnaio_data_disk_suffix | default('1') }}"
            path: /data
            state: mounted
            fstype: ext4

    - name: Create the images directory
      file:
        path: /data/images
        owner: root
        group: root
        mode: "0755"
        state: directory

    - name: Define the default virt storage pool
      virt_pool:
        name: default
        state: present
        xml: |
          <pool type='dir'>
            <name>default</name>
            <target>
              <path>/data/images</path>
              <permissions>
                <mode>0755</mode>
                <owner>0</owner>
                <group>0</group>
              </permissions>
            </target>
          </pool>          

    - name: Set default virt storage pool to active
      virt_pool:
        name: default
        state: active

    - name: Set default virt storage pool to autostart
      virt_pool:
        name: default
        autostart: yes

    - name: Load virtio kernel modules
      shell: |
        for mod in $(find /lib/modules/$(uname -r) -type f -name 'virtio*.ko'); do
          module=$(echo $(basename $mod) | sed 's/\.ko//g')
          modprobe ${module}
          if ! grep ${module} /etc/modules; then
            echo ${module} | tee -a /etc/modules
          fi
        done        

    - name: Wait for guest capabilities to appear
      command: "virsh capabilities"
      register: virsh_caps
      until: "'<guest>' in virsh_caps.stdout"
      retries: 6
      delay: 10