--- # Copyright 2015, Rackspace US, Inc. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. ## AIO user-space configuration options # Scenario used to bootstrap the host bootstrap_host_scenario: "{{ lookup('env','SCENARIO') | default('aio_lxc', true) }}" # # Action used (deploy, upgrade, ...) bootstrap_host_action: "{{ lookup('env', 'ACTION') | default('deploy', true) }}" # # Boolean option to implement OpenStack-Ansible configuration for an AIO # Switch to no for a multi-node configuration bootstrap_host_aio_config: yes # # Path to the location of the bootstrapping configuration files bootstrap_host_aio_config_path: "{{ playbook_dir }}/../etc/openstack_deploy" # # Path to the location of the scripts the bootstrap scripts use bootstrap_host_aio_script_path: "{{ playbook_dir }}/../scripts" # # The user space configuration file names to use bootstrap_host_user_variables_filename: "user_variables.yml" bootstrap_host_user_secrets_filename: "user_secrets.yml" # # Paths to configuration file targets that should be created by the bootstrap bootstrap_host_target_config_paths: - /etc/openstack_deploy - /etc/openstack_deploy/conf.d - /etc/openstack_deploy/env.d # The user variables template to use bootstrap_user_variables_template: user_variables.aio.yml.j2 ## Loopback volumes # Sparse loopback disks are used for the containers if there is no secondary # disk available to partition for btrfs. They are also used for Ceph, Cinder, # Swift and Nova (instance storage). # The size of the loopback volumes can be customized here (in gigabytes). # # Boolean option to deploy the loopback disk for Swap bootstrap_host_loopback_swap: no # Size of the Swap loopback disk in gigabytes (GB). bootstrap_host_loopback_swap_size: 4096 # # Boolean option to deploy the loopback disk for Cinder bootstrap_host_loopback_cinder: yes # Size of the Cinder loopback disk in gigabytes (GB). bootstrap_host_loopback_cinder_size: 1024 # # Boolean option to deploy the loopback disk for Swift bootstrap_host_loopback_swift: yes # Size of the Swift loopback disk in gigabytes (GB). bootstrap_host_loopback_swift_size: 1024 # # Boolean option to deploy the loopback disk for Nova bootstrap_host_loopback_nova: yes # Size of the Nova loopback disk in gigabytes (GB). bootstrap_host_loopback_nova_size: 1024 # # Boolean option to deploy the loopback disk for Manila bootstrap_host_loopback_manila: yes # Size of the Manila loopback disk in gigabytes (GB). bootstrap_host_loopback_manila_size: 1024 # # Boolean option to deploy the loopback disk for machines bootstrap_host_loopback_machines: yes # Size of the machines loopback disk in gigabytes (GB). bootstrap_host_loopback_machines_size: 128 # # Boolean option to deploy the loopback disk for btrfs bootstrap_host_loopback_btrfs: yes # Size of the btrfs loopback disk in gigabytes (GB). bootstrap_host_loopback_btrfs_size: 1024 # # Boolean option to deploy the loopback disk for zfs bootstrap_host_loopback_zfs: yes # Size of the zfs loopback disk in gigabytes (GB). bootstrap_host_loopback_zfs_size: 1024 # # Boolean option to deploy the loopback disk for nfs bootstrap_host_nfs: "{{ 'nfs' in bootstrap_host_scenarios_expanded }}" # Size of the nfs loopback disk in gigabytes (GB). bootstrap_host_loopback_nfs_size: 1024 # # Boolean option to deploy the OSD loopback disks and cluster UUID for Ceph bootstrap_host_ceph: "{{ 'ceph' in bootstrap_host_scenarios_expanded }}" # Size of the Ceph OSD loopbacks bootstrap_host_loopback_ceph_size: 1024 # Ceph OSDs to create on the AIO host ceph_osd_images: - 'ceph1' - 'ceph2' - 'ceph3' ## Network configuration # Default network IP ranges mgmt_range: "172.29.236" vxlan_range: "172.29.240" storage_range: "172.29.244" vlan_range: "172.29.248" netmask: "255.255.252.0" # # NICs bootstrap_host_public_interface: "{{ ansible_facts['default_ipv4']['interface'] }}" # # Utility paths bootstrap_host_network_utils: apt: iptables: /sbin/iptables ethtool: /sbin/ethtool ip: /sbin/ip dnf: iptables: /usr/sbin/iptables ethtool: /usr/sbin/ethtool ip: /usr/sbin/ip # bootstrap_host_iptables_path: "{{ bootstrap_host_network_utils[ansible_facts['pkg_mgr']]['iptables'] }}" bootstrap_host_ethtool_path: "{{ bootstrap_host_network_utils[ansible_facts['pkg_mgr']]['ethtool'] }}" bootstrap_host_ip_path: "{{ bootstrap_host_network_utils[ansible_facts['pkg_mgr']]['ip'] }}" ## Extra storage # An AIO may optionally be built using a second storage device. If a # secondary disk device to use is not specified, then the AIO will be # built on any existing disk partitions. # # WARNING: The data on a secondary storage device specified here will # be destroyed and repartitioned. # # Enable detection for the secondary data disk # This does not run by default, but gate-check-commit and the OSA gate jobs # enable this because it is needed for RAX nodepool instances bootstrap_host_data_disk_device_detect: "{{ lookup('env', 'BOOTSTRAP_HOST_DETECT_DATA_DISK') | default(False, True) }}" # Specify the secondary disk device to use. When the data disk is in use, no NOT # set the full path to the device. IE: "/dev/xvde" should be "xvde". bootstrap_host_data_disk_device: null # Specify the default filesystem type bootstrap_host_data_disk_fs_type: ext4 # # Boolean value to force the repartitioning of the secondary device. bootstrap_host_data_disk_device_force: no # # If the storage capacity on this device is greater than or equal to this # size (in GB), the bootstrap process will use it. # If metal, we don't need that much storage space. bootstrap_host_data_disk_min_size: "{{ (bootstrap_host_scenario is search('metal')) | ternary(10,50) }}" # # Set the data disk formats table. If the backing store is set to lvm the option # the partition will not actually be formatted however for parted, ext2 is used. bootstrap_host_data_disk2_formats: zfs: zfs btrfs: btrfs xfs: xfs dir: ext4 lvm: ext2 overlayfs: ext4 bootstrap_host_format_options: btrfs: '--metadata single --data single --mixed' xfs: '-K -d agcount=64 -l size=128m' ext4: '-O dir_index' # # Set the data disk mount options. bootstrap_host_data_mount_options: zfs: "defaults" btrfs: "noatime,nodiratime,compress=lzo,commit=120,space_cache=v2" xfs: "noatime,nodiratime,logbufs=8,logbsize=256k" ext4: "noatime,nobh,barrier=0,data=writeback" dir: "defaults" lvm: "defaults" swap: "%%" bootstrap_host_data_disk2_fs: "{{ bootstrap_host_data_disk2_formats[_lxc_container_backing_store] }}" bootstrap_host_data_disk2_fs_mount_options: "{{ bootstrap_host_data_mount_options[bootstrap_host_data_disk2_fs] }}" bootstrap_host_data_disk2_path: '/var/lib/lxc' ### Optional Settings ### # Specify the public IP address for the host. # By default the address will be set to the ipv4 address of the # host's network interface that has the default route on it. #bootstrap_host_public_address: 0.0.0.0 # Set the install method for the deployment. Options are ['source', 'distro'] bootstrap_host_install_method: "{{ lookup('env', 'INSTALL_METHOD') | default('source', true) }}" # step-ca step_ca_user: step step_ca_group: step step_ca_config_dir: "/etc/step-ca" step_ca_binary: /usr/bin/step-ca # CA Info step_ca_name: "My Certificate Authority" # Name used in a self generated intermediate step_ca_dns_name: - '127.0.0.1' step_ca_listen_address: ":8889" # server bind address/port ## TLS Cert Info step_ca_cert_expiry: "48" # default number of hours till expiry step_ca_cert_org_unit: "My Team" # Organisational Unit Name in Cert step_ca_cert_organisation: "My Organisation" # Organisation Name in Cert step_ca_cert_country: "My Country" # Country Name in Cert step_ca_intermediate_password: "changeme"