--- # Copyright 2014, Rackspace US, Inc. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # # Overview # ======== # # This file contains the configuration for OpenStack Ansible Deployment # (OSAD) core services. Optional service configuration resides in the # conf.d directory. # # You can customize the options in this file and copy it to # /etc/openstack_deploy/openstack_user_config.yml or create a new # file containing only necessary options for your environment # before deployment. # # OSAD implements PyYAML to parse YAML files and therefore supports structure # and formatting options that augment traditional YAML. For example, aliases # or references. For more information on PyYAML, see the documentation at # # http://pyyaml.org/wiki/PyYAMLDocumentation # # Configuration reference # ======================= # # Level: cidr_networks (required) # Contains an arbitrary list of networks for the deployment. For each network, # the inventory generator uses the IP address range to create a pool of IP # addresses for network interfaces inside containers. A deployment requires # at least one network for management. # # Option: (required, string) # Name of network and IP address range in CIDR notation. This IP address # range coincides with the IP address range of the bridge for this network # on the target host. # # Example: # # Define networks for a typical deployment. # # - Management network on 172.29.236.0/22. Control plane for infrastructure # services, OpenStack APIs, and horizon. # - Tunnel network on 172.29.240.0/22. Data plane for project (tenant) VXLAN # networks. # - Storage network on 172.29.244.0/22. Data plane for storage services such # as cinder and swift. # # cidr_networks: # management: 172.29.236.0/22 # tunnel: 172.29.240.0/22 # storage: 172.29.244.0/22 # # Example: # # Define additional service network on 172.29.248.0/22 for deployment in a # Rackspace data center. # # snet: 172.29.248.0/22 # # -------- # # Level: used_ips (optional) # For each network in the 'cidr_networks' level, specify a list of IP addresses # or a range of IP addresses that the inventory generator should exclude from # the pools of IP addresses for network interfaces inside containers. To use a # range, specify the lower and upper IP addresses (inclusive) with a comma # separator. # # Example: # # The management network includes a router (gateway) on 172.29.236.1 and # DNS servers on 172.29.236.11-12. The deployment includes seven target # servers on 172.29.236.101-103, 172.29.236.111, 172.29.236.121, and # 172.29.236.131. However, the inventory generator automatically excludes # these IP addresses. Network policy at this particular example organization # also reserves 231-254 in the last octet at the high end of the range for # network device management. # # used_ips: # - 172.29.236.1 # - 172.29.236.11,172.29.236.12 # - 172.29.239.231,172.29.239.254 # # -------- # # Level: global_overrides (required) # Contains global options that require customization for a deployment. For # example, load balancer virtual IP addresses (VIP). This level also provides # a mechanism to override other options defined in the playbook structure. # # Option: internal_lb_vip_address (required, string) # Load balancer VIP for the following items: # # - Local package repository # - Galera SQL database cluster # - Administrative and internal API endpoints for all OpenStack services # - Glance registry # - Nova compute source of images # - Cinder source of images # - Instance metadata # # Option: external_lb_vip_address (required, string) # Load balancer VIP for the following items: # # - Public API endpoints for all OpenStack services # - Horizon # # Option: management_bridge (required, string) # Name of management network bridge on target hosts. Typically 'br-mgmt'. # # Option: tunnel_bridge (optional, string) # Name of tunnel network bridge on target hosts. Typically 'br-vxlan'. # # Level: provider_networks (required) # List of container and bare metal networks on target hosts. # # Level: network (required) # Defines a container or bare metal network. Create a level for each # network. # # Option: type (required, string) # Type of network. Networks other than those for neutron such as # management and storage typically use 'raw'. Neutron networks use # 'flat', 'vlan', or 'vxlan'. Coincides with ML2 plug-in configuration # options. # # Option: container_bridge (required, string) # Name of unique bridge on target hosts to use for this network. Typical # values include 'br-mgmt', 'br-storage', 'br-vlan', 'br-vxlan', etc. # # Option: container_interface (required, string) # Name of unique interface in containers to use for this network. # Typical values include 'eth1', 'eth2', etc. # # Option: container_type (required, string) # Name of mechanism that connects interfaces in containers to the bridge # on target hosts for this network. Typically 'veth'. # # Option: container_mtu (optional, string) # Sets the MTU within LXC for a given network type. # # Option: ip_from_q (optional, string) # Name of network in 'cidr_networks' level to use for IP address pool. Only # valid for 'raw' and 'vxlan' types. # # Option: is_container_address (required, boolean) # If true, the load balancer uses this IP address to access services # in the container. Only valid for networks with 'ip_from_q' option. # # Option: is_ssh_address (required, boolean) # If true, Ansible uses this IP address to access the container via SSH. # Only valid for networks with 'ip_from_q' option. # # Option: group_binds (required, string) # List of one or more Ansible groups that contain this # network. For more information, see the openstack_environment.yml file. # # Option: net_name (optional, string) # Name of network for 'flat' or 'vlan' types. Only valid for these # types. Coincides with ML2 plug-in configuration options. # # Option: range (optional, string) # For 'vxlan' type neutron networks, range of VXLAN network identifiers # (VNI). For 'vlan' type neutron networks, range of VLAN tags. Coincides # with ML2 plug-in configuration options. # # Example: # # Define a typical network architecture: # # - Network of type 'raw' that uses the 'br-mgmt' bridge and 'management' # IP address pool. Maps to the 'eth1' device in containers. Applies to all # containers and bare metal hosts. Both the load balancer and Ansible # use this network to access containers and services. # - Network of type 'raw' that uses the 'br-storage' bridge and 'storage' # IP address pool. Maps to the 'eth2' device in containers. Applies to # nova compute and all storage service containers. Optionally applies to # to the swift proxy service. # - Network of type 'vxlan' that contains neutron VXLAN tenant networks # 1 to 1000 and uses 'br-vxlan' bridge on target hosts. Maps to the # 'eth10' device in containers. Applies to all neutron agent containers # and neutron agents on bare metal hosts. # - Network of type 'vlan' that contains neutron VLAN networks 101 to 200 # and uses the 'br-vlan' bridge on target hosts. Maps to the 'eth11' device # in containers. Applies to all neutron agent containers and neutron agents # on bare metal hosts. # - Network of type 'flat' that contains one neutron flat network and uses # the 'br-vlan' bridge on target hosts. Maps to the 'eth12' device in # containers. Applies to all neutron agent containers and neutron agents # on bare metal hosts. # # Note: A pair of 'vlan' and 'flat' networks can use the same bridge because # one only handles tagged frames and the other only handles untagged frames # (the native VLAN in some parlance). However, additional 'vlan' or 'flat' # networks require additional bridges. # # provider_networks: # - network: # group_binds: # - all_containers # - hosts # type: "raw" # container_bridge: "br-mgmt" # container_interface: "eth1" # container_type: "veth" # ip_from_q: "management" # is_container_address: true # is_ssh_address: true # - network: # group_binds: # - glance_api # - cinder_api # - cinder_volume # - nova_compute # # Uncomment the next line if using swift with a storage network. # # - swift_proxy # type: "raw" # container_bridge: "br-storage" # container_type: "veth" # container_interface: "eth2" # container_mtu: "9000" # ip_from_q: "storage" # - network: # group_binds: # - neutron_linuxbridge_agent # container_bridge: "br-vxlan" # container_type: "veth" # container_interface: "eth10" # container_mtu: "9000" # ip_from_q: "tunnel" # type: "vxlan" # range: "1:1000" # net_name: "vxlan" # - network: # group_binds: # - neutron_linuxbridge_agent # container_bridge: "br-vlan" # container_type: "veth" # container_interface: "eth11" # type: "vlan" # range: "101:200" # net_name: "vlan" # - network: # group_binds: # - neutron_linuxbridge_agent # container_bridge: "br-vlan" # container_type: "veth" # container_interface: "eth12" # host_bind_override: "eth12" # type: "flat" # net_name: "flat" # # Example: # # Add the service network to the previous example: # # - Network of type 'raw' that uses the 'br-snet' bridge and 'snet' IP # address pool. Maps to the 'eth3' device in containers. Applies to # glance, nova compute, neutron agent containers, and any of these # services on bare metal hosts. # # provider_networks: # - network: # group_binds: # - glance_api # - nova_compute # - neutron_linuxbridge_agent # type: "raw" # container_bridge: "br-snet" # container_type: "veth" # container_interface: "eth3" # ip_from_q: "snet" # # -------- # # Level: shared-infra_hosts (required) # List of target hosts on which to deploy shared infrastructure services # including the Galera SQL database cluster, RabbitMQ, and Memcached. Recommend # three minimum target hosts for these services. # # Level: (required, string) # Hostname of a target host. # # Option: ip (required, string) # IP address of this target host, typically the IP address assigned to # the management bridge. # # Example: # # Define three shared infrastructure hosts: # # shared-infra_hosts: # infra1: # ip: 172.29.236.101 # infra2: # ip: 172.29.236.102 # infra3: # ip: 172.29.236.103 # # -------- # # Level: repo-infra_hosts (optional) # List of target hosts on which to deploy the package repository. Recommend # minimum three target hosts for this service. Typically contains the same # target hosts as the 'shared-infra_hosts' level. # # Level: (required, string) # Hostname of a target host. # # Option: ip (required, string) # IP address of this target host, typically the IP address assigned to # the management bridge. # # Example: # # Define three package repository hosts: # # repo-infra_hosts: # infra1: # ip: 172.29.236.101 # infra2: # ip: 172.29.236.102 # infra3: # ip: 172.29.236.103 # # If you choose not to implement repository target hosts, you must configure # the 'openstack_repo_url' variable in the user_group_vars.yml file to # contain the URL of a host with an existing repository. # # -------- # # Level: os-infra_hosts (required) # List of target hosts on which to deploy the glance API, nova API, heat API, # and horizon. Recommend three minimum target hosts for these services. # Typically contains the same target hosts as 'shared-infra_hosts' level. # # Level: (required, string) # Hostname of a target host. # # Option: ip (required, string) # IP address of this target host, typically the IP address assigned to # the management bridge. # # Example: # # Define three OpenStack infrastructure hosts: # # os-infra_hosts: # infra1: # ip: 172.29.236.100 # infra2: # ip: 172.29.236.101 # infra3: # ip: 172.29.236.102 # # -------- # # Level: identity_hosts (required) # List of target hosts on which to deploy the keystone service. Recommend # three minimum target hosts for this service. Typically contains the same # target hosts as the 'shared-infra_hosts' level. # # Level: (required, string) # Hostname of a target host. # # Option: ip (required, string) # IP address of this target host, typically the IP address assigned to # the management bridge. # # Example: # # Define three OpenStack identity hosts: # # identity_hosts: # infra1: # ip: 172.29.236.101 # infra2: # ip: 172.29.236.102 # infra3: # ip: 172.29.236.103 # # -------- # # Level: network_hosts (required) # List of target hosts on which to deploy neutron services. Recommend three # minimum target hosts for this service. Typically contains the same target # hosts as the 'shared-infra_hosts' level. # # Level: (required, string) # Hostname of a target host. # # Option: ip (required, string) # IP address of this target host, typically the IP address assigned to # the management bridge. # # Example: # # Define three OpenStack network hosts: # # network_hosts: # infra1: # ip: 172.29.236.101 # infra2: # ip: 172.29.236.102 # infra3: # ip: 172.29.236.103 # # -------- # # Level: compute_hosts (required) # List of target hosts on which to deploy the nova compute service. Recommend # one minimum target host for this service. Typically contains target hosts # that do not reside in other levels. # # Level: (required, string) # Hostname of a target host. # # Option: ip (required, string) # IP address of this target host, typically the IP address assigned to # the management bridge. # # Example: # # Define an OpenStack compute host: # # compute_hosts: # compute1: # ip: 172.29.236.111 # # -------- # # Level: storage-infra_hosts (required) # List of target hosts on which to deploy the cinder API. Recommend three # minimum target hosts for this service. Typically contains the same target # hosts as the 'shared-infra_hosts' level. # # Level: (required, string) # Hostname of a target host. # # Option: ip (required, string) # IP address of this target host, typically the IP address assigned to # the management bridge. # # Example: # # Define three OpenStack storage infrastructure hosts: # # storage-infra_hosts: # infra1: # ip: 172.29.236.101 # infra2: # ip: 172.29.236.102 # infra3: # ip: 172.29.236.103 # # -------- # # Level: storage_hosts (required) # List of target hosts on which to deploy the cinder volume service. Recommend # one minimum target host for this service. Typically contains target hosts # that do not reside in other levels. # # Level: (required, string) # Hostname of a target host. # # Option: ip (required, string) # IP address of this target host, typically the IP address assigned to # the management bridge. # # Level: container_vars (required) # Contains storage options for this target host. # # Option: cinder_storage_availability_zone (optional, string) # Cinder availability zone. # # Option: cinder_default_availability_zone (optional, string) # If the deployment contains more than one cinder availability zone, # specify a default availability zone. # # Level: cinder_backends (required) # Contains cinder backends. # # Option: limit_container_types (optional, string) # Container name string in which to apply these options. Typically # any container with 'cinder_volume' in the name. # # Level: (required, string) # Arbitrary name of the backend. Each backend contains one or more # options for the particular backend driver. The template for the # cinder.conf file can generate configuration for any backend # providing that it includes the necessary driver options. # # Option: volume_backend_name (required, string) # Name of backend, arbitrary. # # The following options apply to the LVM backend driver: # # Option: volume_driver (required, string) # Name of volume driver, typically # 'cinder.volume.drivers.lvm.LVMVolumeDriver'. # # Option: volume_group (required, string) # Name of LVM volume group, typically 'cinder-volumes'. # # The following options apply to the NFS backend driver: # # Option: volume_driver (required, string) # Name of volume driver, # 'cinder.volume.drivers.nfs.NfsDriver'. # NB. When using NFS driver you may want to adjust your # env.d/cinder.yml file to run cinder-volumes in containers. # # Option: nfs_shares_config (optional, string) # File containing list of NFS shares available to cinder, typically # '/etc/cinder/nfs_shares'. # # Option: nfs_mount_point_base (optional, string) # Location in which to mount NFS shares, typically # '$state_path/mnt'. # # The following options apply to the NetApp backend driver: # # Option: volume_driver (required, string) # Name of volume driver, # 'cinder.volume.drivers.netapp.common.NetAppDriver'. # NB. When using NetApp drivers you may want to adjust your # env.d/cinder.yml file to run cinder-volumes in containers. # # Option: netapp_storage_family (required, string) # Access method, typically 'ontap_7mode' or 'ontap_cluster'. # # Option: netapp_storage_protocol (required, string) # Transport method, typically 'scsi' or 'nfs'. NFS transport also # requires the 'nfs_shares_config' option. # # Option: nfs_shares_config (required, string) # For NFS transport, name of the file containing shares. Typically # '/etc/cinder/nfs_shares'. # # Option: netapp_server_hostname (required, string) # NetApp server hostname. # # Option: netapp_server_port (required, integer) # NetApp server port, typically 80 or 443. # # Option: netapp_login (required, string) # NetApp server username. # # Option: netapp_password (required, string) # NetApp server password. # # Level: cinder_nfs_client (optional) # Automates management of the file that cinder references for a list of # NFS mounts. # # Option: nfs_shares_config (required, string) # File containing list of NFS shares available to cinder, typically # typically /etc/cinder/nfs_shares. # # Level: shares (required) # List of shares to populate the 'nfs_shares_config' file. Each share # uses the following format: # # - { ip: "{{ ip_nfs_server }}", share: "/vol/cinder" } # # Example: # # Define an OpenStack storage host: # # storage_hosts: # storage1: # ip: 172.29.236.121 # # Example: # # Use the LVM iSCSI backend in availability zone 'cinderAZ_1': # # container_vars: # cinder_storage_availability_zone: cinderAZ_1 # cinder_default_availability_zone: cinderAZ_1 # cinder_backends: # lvm: # volume_backend_name: LVM_iSCSI # volume_driver: cinder.volume.drivers.lvm.LVMVolumeDriver # volume_group: cinder-volumes # limit_container_types: cinder_volume # # Example: # # Use the NetApp iSCSI backend via Data ONTAP 7-mode in availability zone # 'cinderAZ_2': # # container_vars: # cinder_storage_availability_zone: cinderAZ_2 # cinder_default_availability_zone: cinderAZ_1 # cinder_backends: # netapp: # volume_backend_name: NETAPP_iSCSI # volume_driver: cinder.volume.drivers.netapp.common.NetAppDriver # netapp_storage_family: ontap_7mode # netapp_storage_protocol: iscsi # netapp_server_hostname: hostname # netapp_server_port: 443 # netapp_login: username # netapp_password: password # # # Example: # # Use the ceph RBD backend in availability zone 'cinderAZ_3': # # container_vars: # cinder_storage_availability_zone: cinderAZ_3 # cinder_default_availability_zone: cinderAZ_1 # cinder_backends: # limit_container_types: cinder_volume # volumes_hdd: # volume_driver: cinder.volume.drivers.rbd.RBDDriver # rbd_pool: volumes_hdd # rbd_ceph_conf: /etc/ceph/ceph.conf # rbd_flatten_volume_from_snapshot: 'false' # rbd_max_clone_depth: 5 # rbd_store_chunk_size: 4 # rados_connect_timeout: -1 # glance_api_version: 2 # volume_backend_name: volumes_hdd # rbd_user: "{{ cinder_ceph_client }}" # rbd_secret_uuid: "{{ cinder_ceph_client_uuid }}" # # # -------- # # Level: log_hosts (required) # List of target hosts on which to deploy logging services. Recommend # one minimum target host for this service. # # Level: (required, string) # Hostname of a target host. # # Option: ip (required, string) # IP address of this target host, typically the IP address assigned to # the management bridge. # # Example: # # Define a logging host: # # log_hosts: # log1: # ip: 172.29.236.131