Fix interface selection to be automatic

Added a list of possible interfaces for which the
vagrant provisioner will choose the first one that
is available.  No more editing the test recipes.

Cleaned up the os selection to hide the
version specific stuff to be consistent with the
environment logic.

Fixed up some file modes.

Forced the chef client config directory as it can search
in bad places in some scenarios.

Change-Id: I38a7a86b58893b912af99fabf04ca9052f914346

Rakefile

@@ -1,3 +1,6 @@
+current_dir = File.dirname(__FILE__)
+client_opts = "--force-formatter -z --config #{current_dir}/.chef/knife.rb"
+
 task default: ["test"]
 
 desc "Default gate tests to run"
@@ -18,7 +21,7 @@ end
 
 desc "Destroy machines"
 task :destroy_machines do
-  run_command('chef-client --force-formatter -z destroy_all.rb')
+  run_command("chef-client #{client_opts} destroy_all.rb")
 end
 
 desc "Vendor your cookbooks/"
@@ -36,22 +39,22 @@ end
 
 desc "All-in-One Neutron build"
 task :aio_neutron => :create_key do
-  run_command('chef-client --force-formatter -z vagrant_linux.rb aio-neutron.rb')
+  run_command("chef-client #{client_opts} vagrant_linux.rb aio-neutron.rb")
 end
 
 desc "All-in-One Nova-networking build"
 task :aio_nova => :create_key do
-  run_command('chef-client --force-formatter -z vagrant_linux.rb aio-nova.rb')
+  run_command("chef-client #{client_opts} vagrant_linux.rb aio-nova.rb")
 end
 
 desc "Multi-Neutron build"
 task :multi_neutron => :create_key do
-  run_command('chef-client --force-formatter -z vagrant_linux.rb multi-neutron.rb')
+  run_command("chef-client #{client_opts} vagrant_linux.rb multi-neutron.rb")
 end
 
 desc "Multi-Nova-networking build"
 task :multi_nova => :create_key do
-  run_command('chef-client --force-formatter -z vagrant_linux.rb multi-nova.rb')
+  run_command("chef-client #{client_opts} vagrant_linux.rb multi-nova.rb")
 end
 
 desc "Blow everything away"
@@ -176,7 +179,7 @@ task :integration => [:create_key, :berks_vendor] do
   for i in 1..3
     puts "####### Pass #{i}"
     # Kick off chef client in local mode, will converge OpenStack right on the gate job "in place"
-    sh %(sudo chef-client --force-logger -z -E integration-aio-neutron -r 'role[allinone-compute]','role[os-image-upload]','recipe[openstack-integration-test::setup]')
+    sh %(sudo chef-client #{client_opts} -E integration-aio-neutron -r 'role[allinone-compute]','role[os-image-upload]','recipe[openstack-integration-test::setup]')
     _dump_logs
     _setup_local_network if i == 1
     _run_basic_queries

aio-neutron.rb

@@ -15,7 +15,15 @@ controller_config = <<-ENDCONFIG
     v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
   end
   config.vm.network "public_network",
-    bridge: '<put your interface device name here>'
+    bridge: ["en0: USB Ethernet",
+             "en1: USB Ethernet",
+             "en2: USB Ethernet",
+             "en3: USB Ethernet",
+             "en4: USB Ethernet",
+             "en0: Wi-Fi (AirPort)",
+             "en1: Wi-Fi (AirPort)",
+             "en2: Wi-Fi (AirPort)",
+             "Intel(R) Centrino(R) Advanced-N 6205"]
 ENDCONFIG
 
 env = 'vagrant-aio-neutron'

aio-nova.rb

@@ -15,7 +15,15 @@ controller_config = <<-ENDCONFIG
     v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
   end
   config.vm.network "public_network",
-    bridge: '<put your interface device name here>'
+    bridge: ["en0: USB Ethernet",
+             "en1: USB Ethernet",
+             "en2: USB Ethernet",
+             "en3: USB Ethernet",
+             "en4: USB Ethernet",
+             "en0: Wi-Fi (AirPort)",
+             "en1: Wi-Fi (AirPort)",
+             "en2: Wi-Fi (AirPort)",
+             "Intel(R) Centrino(R) Advanced-N 6205"]
 ENDCONFIG
 
 env = 'vagrant-aio-nova'

doc/aio-neutron.md

@@ -9,8 +9,8 @@ Changes need to be made to the aio-neutron.rb file.
 ### Device interface
 
 The device interface must be is specified by name in the aio-neutron.rb file.
-There is one place to change, look for `<put your interface device name here>`,
-this is because of OVS needing to slurp up an adapter for internet access.
+There is one place to change, look for `bridge: [....]`.  If your interface is not in the list, add it.
+This is because of OVS needing to slurp up an adapter for internet access.
 
 Note: To see a list of virtualbox network interface names use:
     `$ vboxmanage list bridgedifs`

doc/aio-nova.md

@@ -9,7 +9,7 @@ Changes need to be made to the aio-nova.rb file.
 ### Device interface
 
 The device interface must be is specified by name in the aio-nova.rb file.
-There is one place to change, look for `<put your interface device name here>`.
+There is one place to change, look for `bridge: [....]`.  If your interface is not in the list, add it.
 This is for an extra network adapter to your network, this is good practise for the
 more advance setups.
 

doc/multi-nova.md

@@ -18,11 +18,11 @@ For example, on my home network, my laptop has an IP of 192.168.1.xxx, so I set
 ### Device interface
 
 The device interface must be is specified by name in the multi-nova.rb file.
-There are two places to change, look for `<put your interface device name here>`.
+There are two places to change, look for `bridge: [....]`.  If your interface is not in the list, add it.
 
 Note: To see a list of virtualbox network interface names use:
 `$ vboxmanage list bridgedifs`
 
 + For Windows 7, open the Control Panel, Network and Internet, Network Connections.  Look in the Connectivity column for a row with "Internet access", and use the "Device Name". For example, 'Intel(R) Centrino(R) Advanced-N 6205'.
-+ For Mac, this works from some: 'en0: Wi-Fi (AirPort)'
++ For Mac, this works from some: 'en0: Wi-Fi (AirPort)' or 'en3: USB Ethernet'
 + For Linux, ...TODO...

multi-nova.rb

@@ -16,7 +16,15 @@ controller_config = <<-ENDCONFIG
     v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
   end
   config.vm.network "public_network", ip: "172.16.100.60",
-    bridge: '<put your interface device name here>'
+    bridge: ["en0: USB Ethernet",
+             "en1: USB Ethernet",
+             "en2: USB Ethernet",
+             "en3: USB Ethernet",
+             "en4: USB Ethernet",
+             "en0: Wi-Fi (AirPort)",
+             "en1: Wi-Fi (AirPort)",
+             "en2: Wi-Fi (AirPort)",
+             "Intel(R) Centrino(R) Advanced-N 6205"]
 ENDCONFIG
 
 env = 'vagrant-multi-nova'
@@ -46,7 +54,15 @@ config.vm.provider "virtualbox" do |v|
   v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
 end
 config.vm.network "public_network", ip: "172.16.100.#{ip_suff}",
-  bridge: '<put your interface device name here>'
+  bridge: ["en0: USB Ethernet",
+           "en1: USB Ethernet",
+           "en2: USB Ethernet",
+           "en3: USB Ethernet",
+           "en4: USB Ethernet",
+           "en0: Wi-Fi (AirPort)",
+           "en1: Wi-Fi (AirPort)",
+           "en2: Wi-Fi (AirPort)",
+           "Intel(R) Centrino(R) Advanced-N 6205"]
 ENDCONFIG
       role 'os-compute-worker'
       chef_environment env

vagrant_linux.rb

@@ -8,7 +8,8 @@ vagrant_box 'ubuntu14' do
   url 'http://opscode-vm-bento.s3.amazonaws.com/vagrant/virtualbox/opscode_ubuntu-14.04_chef-provisionerless.box'
 end
 
-os = ENV['REPO_OS'] || 'ubuntu14'
+os = 'ubuntu14'
+os = 'centos7.1' if ENV['REPO_OS'].to_s.include?('centos')
 
 with_driver "vagrant:#{File.dirname(__FILE__)}/vms"
 with_machine_options vagrant_options: {