#!/bin/bash

# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.

BUILD_FAIL=0

if [ -x "$(command -v getconf)" ]; then
    NUMBER_OF_CORES=$(getconf _NPROCESSORS_ONLN)
else
    NUMBER_OF_CORES=2
fi

function setup_directories {
    language=$1
    for directory in ${DIRECTORIES["$language"]} ; do
        echo "   $directory"
        openstack-generate-docbook -l $language -b $directory -r $DOC_DIR
    done
}


function setup_language {
    language=$1
    echo "Setting up files for $language"
    echo "======================="
    echo "  Directories:"
    setup_directories $language
    if [ -n "$POM_FILE" ] ; then
        cp $POM_FILE generated/$language/pom.xml
    fi
}

function build_rst {
    language=$1
    book=$2

    # First build all the single po files
    # Note that we need to run inside a venv since the venv we are run in
    # uses SitePackages=True and we have to install Sphinx in the venv
    # together with openstackdocstheme. With SitePackages, the global Sphinx
    # is used and that will not work with a local openstackdocstheme installed.
    TAG=""
    # We need to extract all strings, so add all supported tags
    if [ ${book} = "firstapp" ] ; then
        TAG="-t libcloud -t fog -t dotnet -t openstacksdk -t pkgcloud -t shade"
    fi
    if [ ${book} = "install-guide" ] ; then
        TAG="-t obs -t rdo -t ubuntu -t debian"
    fi

    # Use "common" directory as common if exists while migration
    if [[ -e ${DOC_DIR}common/conventions.rst ]] ; then
        COMMON="common"
    else
        COMMON="common-rst"
    fi
    LOCALE_DIR="${DOC_DIR}${book}/source/locale/"
    COMMON_DIR="${DOC_DIR}${COMMON}/source/locale/"

    tox -evenv "sphinx-build -j $NUMBER_OF_CORES -q -E -W -b gettext $TAG \
                ${DOC_DIR}${book}/source/ ${LOCALE_DIR}"


    # Merge the common-rst po file in
    if [[ -e ${COMMON_DIR}${language}/LC_MESSAGES/${COMMON}.po ]] ; then
        msgcat --use-first -o ${LOCALE_DIR}${language}/${book}.po \
            ${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po \
            ${COMMON_DIR}${language}/LC_MESSAGES/${COMMON}.po
        mv -f ${LOCALE_DIR}${language}/${book}.po \
            ${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po
    fi
    # Now run msgmerge on all files
    for f in ${LOCALE_DIR}*.pot ; do
        # Skip the master file
        if [ $f = "${LOCALE_DIR}${book}.pot" ] ; then
            continue
        fi
        bf=$(basename $f)
        # Remove .pot
        bfname=${bf%.pot}
        msgmerge --silent \
            -o ${LOCALE_DIR}${language}/LC_MESSAGES/${bfname}.po \
            ${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po \
            ${LOCALE_DIR}${bf}
        msgfmt ${LOCALE_DIR}${language}/LC_MESSAGES/${bfname}.po \
            -o ${LOCALE_DIR}${language}/LC_MESSAGES/${bfname}.mo
    done

    # Set the bug project to I18n project
    grep 'bug_project' ${DOC_DIR}${book}/source/conf.py > /dev/null
    if [ "$?" -eq 0 ] ; then
        # Replace the existing "bug_project" html context
        sed -i -e \
            's/"bug_project" *: *[^ ,}]*/"bug_project": "openstack-i18n"/' \
            ${DOC_DIR}${book}/source/conf.py
    else
        # Add the "bug_project" html context
        sed -i -e \
            's/html_context *= *{/html_context = { \
            "bug_project": "openstack-i18n", /' \
            ${DOC_DIR}${book}/source/conf.py
    fi

    # Build all books
    if [ ${book} = "firstapp" ] ; then
        # Firstapp has several variations, build all of them
        for tag in libcloud dotnet fog openstacksdk pkgcloud shade; do
            BUILD_DIR="${DOC_DIR}${book}/build-${tag}/html"
            DOCTREES="${BUILD_DIR}.doctrees"
            tox -evenv "sphinx-build -j $NUMBER_OF_CORES -q -E \
                -t $tag -D language=${language} \
                -d ${DOCTREES}
                ${DOC_DIR}${book}/source/ \
                ${BUILD_DIR}"
            mkdir -p publish-docs/${language}/${book}-${tag}
            rsync -a ${DOC_DIR}${book}/build-${tag}/html/ \
                publish-docs/${language}/${book}-${tag}
        done
    elif [ ${book} = "install-guide" ] ; then
        # Install Guide has several variations, build all of them
        TAGS="obs rdo ubuntu debian"
        INDEX=${DOC_DIR}${book}/source/index.rst

        # For translation work, we should have only one index file,
        # because our tools generate translation resources from
        # only one index file.
        # Therefore, this tool uses one combined index file
        # while processing title and toctree for each distribution.

        # Save and restore the index file
        cp -f ${INDEX} ${INDEX}.save
        trap "mv -f ${INDEX}.save ${INDEX}" EXIT

        for tag in $TAGS; do
            ##
            # Because Sphinx uses the first heading as title regardless of
            # only directive, replace title directive with the proper title
            # for each distribution to set the title explicitly.
            title=$(grep -m 1 -A 5 "^.. only:: ${tag}" ${INDEX} | \
                sed -n 4p | sed -e 's/^ *//g')
            sed -i -e "s/\.\. title::.*/.. title:: ${title}/" ${INDEX}

            ##
            # Sphinx builds the navigation before processing directives,
            # so the conditional toctree does not work.
            # We need to prepare toctree depending on distribution
            # only with one toctree before exectuing sphinx-build.

            # Get line number of each tag
            lineno_start=$(grep -n "^Contents" ${INDEX} | sed -e 's/:.*//')
            lineno_end=$(grep -n "^.. end of contents" ${INDEX} \
                | sed -e 's/:.*//')
            lineno_debian=$(grep -n "^.. only:: debian" ${INDEX} \
                | tail -1 | sed -e 's/:.*//')
            lineno_notdebian=$(grep -n "^.. only:: [^d]" ${INDEX} \
                | tail -1 | sed -e 's/:.*//')

            # Remove indent for pseudo only directive
            sed -i "${lineno_start},${lineno_end} \
                s/^  *\.\. toctree/.. toctree/" ${INDEX}
            sed -i "${lineno_start},${lineno_end} s/^  */   /" ${INDEX}

            # Remove unnecessary toctree for each distribution
            if [[ "$tag" == "debian" ]]; then
                sed -i "${lineno_notdebian},${lineno_debian}d" ${INDEX}
            else
                sed -i "${lineno_debian},$((${lineno_end}-1))d" ${INDEX}
                sed -i "${lineno_notdebian}d" ${INDEX}
            fi

            # Build the guide
            BUILD_DIR="${DOC_DIR}${book}/build-${tag}/html"
            DOCTREES="${BUILD_DIR}.doctrees"
            tox -evenv "sphinx-build -j $NUMBER_OF_CORES -q -E -t $tag \
                -D language=${language}
                -d ${DOCTREES}
                ${DOC_DIR}${book}/source/ \
                ${BUILD_DIR}"
            mkdir -p publish-docs/${language}/${book}-${tag}
            rsync -a ${DOC_DIR}${book}/build-${tag}/html/ \
                publish-docs/${language}/${book}-${tag}

            # Restore the index file
            cp -f ${INDEX}.save ${INDEX}

            # Remove Debian specific content from other guides
            if [[ "$tag" != "debian" ]]; then
                rm -rf publish-docs/${language}/{book}-$tag/debconf
            fi
        done
    else
        BUILD_DIR="${DOC_DIR}${book}/build/html"
        DOCTREES="${BUILD_DIR}.doctrees"
        tox -evenv "sphinx-build -j $NUMBER_OF_CORES \
            -q -E -D language=${language} \
            -d ${DOCTREES} \
            ${DOC_DIR}${book}/source/ \
            ${BUILD_DIR}"
        mkdir -p publish-docs/${language}/${book}/
        rsync -a ${DOC_DIR}${book}/build/html/ \
            publish-docs/${language}/${book}/
    fi
    # Remove newly created files
    git clean -f -q ${LOCALE_DIR}${language}/LC_MESSAGES/*.po
    git clean -f -x -q ${LOCALE_DIR}${language}/LC_MESSAGES/*.mo
    git clean -f -q ${LOCALE_DIR}*.pot
    # Revert changes to po file
    git reset -q ${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po
    git checkout -- ${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po
    # Revert changes to conf.py
    git reset -q ${DOC_DIR}${book}/source/conf.py
    git checkout -- ${DOC_DIR}${book}/source/conf.py
}


function test_language {
    language=$1

    echo
    echo "Building for language $language"
    echo

    args=("-v")
    if [[ $PURPOSE -eq "publish" ]]; then
        args+=("--publish")
    fi
    args+=("--check-build" "-l $language")
    BUILD_XML=0
    for book in ${BOOKS["$language"]}; do
        if [ ${SPECIAL_BOOKS[$book]+_} ] ; then
            if [ ${SPECIAL_BOOKS[$book]} = "RST" ] ; then
                echo "Building translated RST book $book for $language"
                build_rst $language $book
                if [[ $? -eq 0 ]] ; then
                    echo "... succeeded"
                else
                    echo "... failed"
                    BUILD_FAIL=1
                fi
                continue
            fi
        fi
        args+=("--only-book $book")
        BUILD_XML=1
    done

    if [ "$BUILD_XML" -eq "1" ] ; then

        setup_language $language

        openstack-doc-test ${args[@]}

        if [[ $? -eq 0 ]] ; then
            echo "... succeeded"
        else
            echo "... failed"
            BUILD_FAIL=1
        fi
    fi
}


function handle_draft_language {
    language=$1

    echo
    echo "Moving drafts for language $language"
    echo

    mkdir -p publish-docs/draft/$language
    for book in ${DRAFTS["$language"]}; do
        case "${book}" in
            config-reference)
                mv publish-docs/$language/draft/$book \
                    publish-docs/draft/$language/$book
                rmdir --ignore-fail-on-non-empty publish-docs/$language/draft
                ;;
            firstapp)
                for tag in libcloud dotnet fog openstacksdk pkgcloud shade; do
                    mv publish-docs/$language/$book-${tag} \
                        publish-docs/draft/$language/$book-${tag}
                done
                rmdir --ignore-fail-on-non-empty publish-docs/$language/
                ;;
            install-guide)
                for tag in obs rdo ubuntu debian; do
                    mv publish-docs/$language/$book-${tag} \
                        publish-docs/draft/$language/$book-${tag}
                done
                rmdir --ignore-fail-on-non-empty publish-docs/$language/
                ;;
            *)
                mv publish-docs/$language/$book \
                    publish-docs/draft/$language/$book
                ;;
        esac
    done


}


function usage {
    echo "usage: $0 CONF_FILE PURPOSE LANGUAGE1 LANGUAGE2 ..."
    echo
    echo "CONF_FILE is the path to the configuration file."
    echo
    echo "PURPOSE is either 'test' or 'publish'."
    echo
    echo "LANGUAGE is either 'all' or 'LANG'."
    echo "LANG is a language code like 'fr' or 'ja'."
}

# Declare in case it's not in the file
declare -A SPECIAL_BOOKS
declare -A DRAFTS
CONF_FILE=$1
shift

if [[ -z $CONF_FILE ]]; then
    usage
    exit 1
fi

if [[ ! -e $CONF_FILE ]]; then
    echo "Error: the configuration file '$CONF_FILE' does not exist"
    exit 1
fi

source $CONF_FILE

if [[ -z $(declare -p BOOKS 2> /dev/null | grep 'declare -A BOOKS') || \
    -z $(declare -p DIRECTORIES 2> /dev/null | \
    grep 'declare -A DIRECTORIES') || \
    -z $DOC_DIR ]]; then
    echo "Error: the configuration file '$CONF_FILE' is invalid"
    exit 1
fi

case "$1" in
    test|publish)
        PURPOSE=$1
        shift
        ;;
    *)
        usage
        exit 1
        ;;
esac

for language in "$@" ; do
    case "$language" in
        all)
            for language in "${!BOOKS[@]}"; do
                test_language $language
            done
            # Move draft language guides
            for language in "${!DRAFTS[@]}"; do
                handle_draft_language $language
            done
            ;;
        *)
            if [[ -n ${BOOKS[$language]} ]]; then
                test_language $language
                if [ ${DRAFTS["${language}"]+_} ] ; then
                    handle_draft_language $language
                fi
            else
                BUILD_FAIL=1
                echo "Error: language $language not handled"
            fi
            ;;
    esac
done


exit $BUILD_FAIL