openstack-doc-tools/bin/doc-tools-check-languages
Andreas Jaeger bed10f856b Fix building of translated Install Guides on Mitaka
This fixes https://review.openstack.org/#/c/427596 - to skip the Debconf
guide if it does not exist.

Change-Id: Ic78068b9ce08f878049a07e1bb7891ccf4aa58ab
2017-02-01 14:39:24 +01:00

338 lines
12 KiB
Bash
Executable File

#!/bin/bash -xe
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
INSTALL_TAGS="obs rdo ubuntu debian debconf"
FIRSTAPP_TAGS="libcloud dotnet fog openstacksdk pkgcloud shade"
# This marker is needed for Infra publishing and needs to go into the
# root directory of each translated manual as file ".root-marker".
MARKER_TEXT="Project: $ZUUL_PROJECT Ref: $ZUUL_REFNAME Build: $ZUUL_UUID Revision: $ZUUL_NEWREV"
function build_rst {
language=$1
book=$2
local ret
# First build all the single po files
# Note that we need to run inside a venv since the venv we are run in
# uses SitePackages=True and we have to install Sphinx in the venv
# together with openstackdocstheme. With SitePackages, the global Sphinx
# is used and that will not work with a local openstackdocstheme installed.
TAG=""
# We need to extract all strings, so add all supported tags
if [ ${book} = "firstapp" ] ; then
TAG="-t libcloud -t fog -t dotnet -t openstacksdk -t pkgcloud -t shade"
fi
if [ ${book} = "install-guide" ] ; then
TAG="-t obs -t rdo -t ubuntu -t debian"
fi
COMMON="common"
LOCALE_DIR="${DOC_DIR}${book}/source/locale/"
COMMON_DIR="${DOC_DIR}${COMMON}/source/locale/"
tox -evenv -- sphinx-build -q -E -W -b gettext $TAG \
${DOC_DIR}${book}/source/ ${LOCALE_DIR}
# Merge the common po file
if [[ -e ${COMMON_DIR}${language}/LC_MESSAGES/${COMMON}.po ]] ; then
msgcat --use-first -o ${LOCALE_DIR}${language}/${book}.po \
${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po \
${COMMON_DIR}${language}/LC_MESSAGES/${COMMON}.po
mv -f ${LOCALE_DIR}${language}/${book}.po \
${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po
fi
# Now run msgmerge on all files
for f in ${LOCALE_DIR}*.pot ; do
# Skip the master file
if [ $f = "${LOCALE_DIR}${book}.pot" ] ; then
continue
fi
bf=$(basename $f)
# Remove .pot
bfname=${bf%.pot}
msgmerge --silent \
-o ${LOCALE_DIR}${language}/LC_MESSAGES/${bfname}.po \
${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po \
${LOCALE_DIR}${bf}
msgfmt ${LOCALE_DIR}${language}/LC_MESSAGES/${bfname}.po \
-o ${LOCALE_DIR}${language}/LC_MESSAGES/${bfname}.mo
done
# Set the bug project to I18n project
set +e
grep 'bug_project' ${DOC_DIR}${book}/source/conf.py > /dev/null
ret=$?
set -e
if [ "$ret" -eq 0 ] ; then
# Replace the existing "bug_project" html context
sed -i -e \
's/"bug_project" *: *[^ ,}]*/"bug_project": "openstack-i18n"/' \
${DOC_DIR}${book}/source/conf.py
else
# Add the "bug_project" html context
sed -i -e \
's/html_context *= *{/html_context = { \
"bug_project": "openstack-i18n", /' \
${DOC_DIR}${book}/source/conf.py
fi
# Build all books
if [ ${book} = "firstapp" ] ; then
# Firstapp has several variations, build all of them
for tag in $FIRSTAPP_TAGS ; do
BUILD_DIR="${DOC_DIR}${book}/build-${tag}/html"
DOCTREES="${BUILD_DIR}.doctrees"
tox -evenv -- sphinx-build -q -E \
-t $tag -D language=${language} \
-d ${DOCTREES} \
${DOC_DIR}${book}/source/ \
${BUILD_DIR}
PUBLISH_DIR=publish-docs/${language}/${book}-${tag}
mkdir -p ${PUBLISH_DIR}
rsync -a ${DOC_DIR}${book}/build-${tag}/html/ ${PUBLISH_DIR}
echo $MARKER_TEXT > ${PUBLISH_DIR}/.root-marker
done
elif [ ${book} = "install-guide" ] ; then
# Install Guide has several variations, build all of them
INDEX=${DOC_DIR}${book}/source/index.rst
# For translation work, we should have only one index file,
# because our tools generate translation resources from
# only one index file.
# Therefore, this tool uses one combined index file
# while processing title and toctree for each distribution.
# Save and restore the index file
cp -f ${INDEX} ${INDEX}.save
trap "mv -f ${INDEX}.save ${INDEX}" EXIT
for tag in $INSTALL_TAGS; do
if [[ "$tag" == "debconf" ]]; then
# Not all branches have this directory
if [[ -d ${DOC_DIR}${book}-${tag}/source ]] ; then
# Build the guide with debconf
# To use debian only contents, use "debian" tag.
BUILD_DIR="${DOC_DIR}${book}-${tag}/build-${tag}/html"
DOCTREES="${BUILD_DIR}.doctrees"
tox -evenv -- sphinx-build -q -E -t debian \
-D language=${language} \
-d ${DOCTREES} \
${DOC_DIR}${book}-${tag}/source/ \
${BUILD_DIR}
PUBLISH_DIR=publish-docs/${language}/${book}-${tag}
mkdir -p ${PUBLISH_DIR}
rsync -a ${DOC_DIR}${book}-${tag}/build-${tag}/html/ \
${PUBLISH_DIR}
echo $MARKER_TEXT > ${PUBLISH_DIR}/.root-marker
fi
else
##
# Because Sphinx uses the first heading as title regardless of
# only directive, replace title directive with the proper title
# for each distribution to set the title explicitly.
title=$(grep -m 1 -A 5 "^.. only:: ${tag}" ${INDEX} | \
sed -n 4p | sed -e 's/^ *//g')
sed -i -e "s/\.\. title::.*/.. title:: ${title}/" ${INDEX}
##
# Sphinx builds the navigation before processing directives,
# so the conditional toctree does not work.
# We need to prepare toctree depending on distribution
# only with one toctree before exectuing sphinx-build.
# Build the guide
BUILD_DIR="${DOC_DIR}${book}/build-${tag}/html"
DOCTREES="${BUILD_DIR}.doctrees"
tox -evenv -- sphinx-build -q -E -t $tag \
-D language=${language} \
-d ${DOCTREES} \
${DOC_DIR}${book}/source/ \
${BUILD_DIR}
PUBLISH_DIR=publish-docs/${language}/${book}-${tag}
mkdir -p ${PUBLISH_DIR}
rsync -a ${DOC_DIR}${book}/build-${tag}/html/ \
${PUBLISH_DIR}
echo $MARKER_TEXT > ${PUBLISH_DIR}/.root-marker
fi
done
else
BUILD_DIR="${DOC_DIR}${book}/build/html"
DOCTREES="${BUILD_DIR}.doctrees"
tox -evenv -- sphinx-build \
-q -E -D language=${language} \
-d ${DOCTREES} \
${DOC_DIR}${book}/source/ \
${BUILD_DIR}
PUBLISH_DIR=publish-docs/${language}/${book}/
mkdir -p ${PUBLISH_DIR}
rsync -a ${DOC_DIR}${book}/build/html/ ${PUBLISH_DIR}
echo $MARKER_TEXT > ${PUBLISH_DIR}/.root-marker
fi
# Remove newly created files
git clean -f -q ${LOCALE_DIR}${language}/LC_MESSAGES/*.po
git clean -f -x -q ${LOCALE_DIR}${language}/LC_MESSAGES/*.mo
git clean -f -q ${LOCALE_DIR}*.pot
# Revert changes to po file
git reset -q ${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po
git checkout -- ${LOCALE_DIR}${language}/LC_MESSAGES/${book}.po
# Revert changes to conf.py
git reset -q ${DOC_DIR}${book}/source/conf.py
git checkout -- ${DOC_DIR}${book}/source/conf.py
}
function test_language {
language=$1
echo
echo "Building for language $language"
echo
args=("-v")
if [[ $PURPOSE -eq "publish" ]]; then
args+=("--publish")
fi
args+=("--check-build" "-l $language")
for book in ${BOOKS["$language"]}; do
if [ ${SPECIAL_BOOKS[$book]+_} ] ; then
if [ ${SPECIAL_BOOKS[$book]} = "RST" ] ; then
echo "Building translated RST book $book for $language"
build_rst $language $book
continue
fi
fi
done
}
function handle_draft_language {
language=$1
echo
echo "Moving drafts for language $language"
echo
mkdir -p publish-docs/draft/$language
for book in ${DRAFTS["$language"]}; do
case "${book}" in
config-reference)
mv publish-docs/$language/draft/$book \
publish-docs/draft/$language/$book
rmdir --ignore-fail-on-non-empty publish-docs/$language/draft
;;
firstapp)
for tag in $FIRSTAPP_TAGS; do
mv publish-docs/$language/$book-${tag} \
publish-docs/draft/$language/$book-${tag}
done
rmdir --ignore-fail-on-non-empty publish-docs/$language/
;;
install-guide)
for tag in $INSTALL_TAGS ; do
# Not all tags might be build on all branches
if [[ -d publish-docs/$language/$book-${tag} ]] ; then
mv publish-docs/$language/$book-${tag} \
publish-docs/draft/$language/$book-${tag}
fi
done
rmdir --ignore-fail-on-non-empty publish-docs/$language/
;;
*)
mv publish-docs/$language/$book \
publish-docs/draft/$language/$book
;;
esac
done
}
function usage {
echo "usage: $0 CONF_FILE PURPOSE LANGUAGE1 LANGUAGE2 ..."
echo
echo "CONF_FILE is the path to the configuration file."
echo
echo "PURPOSE is either 'test' or 'publish'."
echo
echo "LANGUAGE is either 'all' or 'LANG'."
echo "LANG is a language code like 'fr' or 'ja'."
}
# Declare in case it's not in the file
declare -A SPECIAL_BOOKS
declare -A DRAFTS
CONF_FILE=$1
shift
if [[ -z $CONF_FILE ]]; then
usage
exit 1
fi
if [[ ! -e $CONF_FILE ]]; then
echo "Error: the configuration file '$CONF_FILE' does not exist"
exit 1
fi
source $CONF_FILE
if [[ -z $(declare -p BOOKS 2> /dev/null | grep 'declare -A BOOKS') || \
-z $(declare -p DIRECTORIES 2> /dev/null | \
grep 'declare -A DIRECTORIES') || \
-z $DOC_DIR ]]; then
echo "Error: the configuration file '$CONF_FILE' is invalid"
exit 1
fi
case "$1" in
test|publish)
PURPOSE=$1
shift
;;
*)
usage
exit 1
;;
esac
for language in "$@" ; do
case "$language" in
all)
for language in "${!BOOKS[@]}"; do
test_language $language
done
# Move draft language guides
for language in "${!DRAFTS[@]}"; do
handle_draft_language $language
done
;;
*)
if [[ -n ${BOOKS[$language]} ]]; then
test_language $language
if [ ${DRAFTS["${language}"]+_} ] ; then
handle_draft_language $language
fi
else
echo "Error: language $language not handled"
fi
;;
esac
done
exit 0