# Copyright 2017 The Openstack-Helm Authors. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. {{ include "senlin.conf.senlin_values_skeleton" .Values.conf.senlin | trunc 0 }} {{ include "senlin.conf.senlin" .Values.conf.senlin }} {{- define "senlin.conf.senlin_values_skeleton" -}} {{- if not .default -}}{{- set . "default" dict -}}{{- end -}} {{- if not .default.oslo -}}{{- set .default "oslo" dict -}}{{- end -}} {{- if not .default.oslo.log -}}{{- set .default.oslo "log" dict -}}{{- end -}} {{- if not .default.oslo.messaging -}}{{- set .default.oslo "messaging" dict -}}{{- end -}} {{- if not .default.oslo.service -}}{{- set .default.oslo "service" dict -}}{{- end -}} {{- if not .default.oslo.service.periodic_task -}}{{- set .default.oslo.service "periodic_task" dict -}}{{- end -}} {{- if not .default.oslo.service.service -}}{{- set .default.oslo.service "service" dict -}}{{- end -}} {{- if not .default.senlin -}}{{- set .default "senlin" dict -}}{{- end -}} {{- if not .default.senlin.config -}}{{- set .default.senlin "config" dict -}}{{- end -}} {{- if not .authentication -}}{{- set . "authentication" dict -}}{{- end -}} {{- if not .authentication.senlin -}}{{- set .authentication "senlin" dict -}}{{- end -}} {{- if not .authentication.senlin.config -}}{{- set .authentication.senlin "config" dict -}}{{- end -}} {{- if not .database -}}{{- set . "database" dict -}}{{- end -}} {{- if not .database.oslo -}}{{- set .database "oslo" dict -}}{{- end -}} {{- if not .database.oslo.db -}}{{- set .database.oslo "db" dict -}}{{- end -}} {{- if not .keystone_authtoken -}}{{- set . "keystone_authtoken" dict -}}{{- end -}} {{- if not .keystone_authtoken.keystonemiddleware -}}{{- set .keystone_authtoken "keystonemiddleware" dict -}}{{- end -}} {{- if not .keystone_authtoken.keystonemiddleware.auth_token -}}{{- set .keystone_authtoken.keystonemiddleware "auth_token" dict -}}{{- end -}} {{- if not .matchmaker_redis -}}{{- set . "matchmaker_redis" dict -}}{{- end -}} {{- if not .matchmaker_redis.oslo -}}{{- set .matchmaker_redis "oslo" dict -}}{{- end -}} {{- if not .matchmaker_redis.oslo.messaging -}}{{- set .matchmaker_redis.oslo "messaging" dict -}}{{- end -}} {{- if not .oslo_messaging_amqp -}}{{- set . "oslo_messaging_amqp" dict -}}{{- end -}} {{- if not .oslo_messaging_amqp.oslo -}}{{- set .oslo_messaging_amqp "oslo" dict -}}{{- end -}} {{- if not .oslo_messaging_amqp.oslo.messaging -}}{{- set .oslo_messaging_amqp.oslo "messaging" dict -}}{{- end -}} {{- if not .oslo_messaging_notifications -}}{{- set . "oslo_messaging_notifications" dict -}}{{- end -}} {{- if not .oslo_messaging_notifications.oslo -}}{{- set .oslo_messaging_notifications "oslo" dict -}}{{- end -}} {{- if not .oslo_messaging_notifications.oslo.messaging -}}{{- set .oslo_messaging_notifications.oslo "messaging" dict -}}{{- end -}} {{- if not .oslo_messaging_rabbit -}}{{- set . "oslo_messaging_rabbit" dict -}}{{- end -}} {{- if not .oslo_messaging_rabbit.oslo -}}{{- set .oslo_messaging_rabbit "oslo" dict -}}{{- end -}} {{- if not .oslo_messaging_rabbit.oslo.messaging -}}{{- set .oslo_messaging_rabbit.oslo "messaging" dict -}}{{- end -}} {{- if not .oslo_messaging_zmq -}}{{- set . "oslo_messaging_zmq" dict -}}{{- end -}} {{- if not .oslo_messaging_zmq.oslo -}}{{- set .oslo_messaging_zmq "oslo" dict -}}{{- end -}} {{- if not .oslo_messaging_zmq.oslo.messaging -}}{{- set .oslo_messaging_zmq.oslo "messaging" dict -}}{{- end -}} {{- if not .oslo_policy -}}{{- set . "oslo_policy" dict -}}{{- end -}} {{- if not .oslo_policy.oslo -}}{{- set .oslo_policy "oslo" dict -}}{{- end -}} {{- if not .oslo_policy.oslo.policy -}}{{- set .oslo_policy.oslo "policy" dict -}}{{- end -}} {{- if not .revision -}}{{- set . "revision" dict -}}{{- end -}} {{- if not .revision.senlin -}}{{- set .revision "senlin" dict -}}{{- end -}} {{- if not .revision.senlin.config -}}{{- set .revision.senlin "config" dict -}}{{- end -}} {{- if not .senlin_api -}}{{- set . "senlin_api" dict -}}{{- end -}} {{- if not .senlin_api.senlin -}}{{- set .senlin_api "senlin" dict -}}{{- end -}} {{- if not .senlin_api.senlin.config -}}{{- set .senlin_api.senlin "config" dict -}}{{- end -}} {{- if not .ssl -}}{{- set . "ssl" dict -}}{{- end -}} {{- if not .ssl.oslo -}}{{- set .ssl "oslo" dict -}}{{- end -}} {{- if not .ssl.oslo.service -}}{{- set .ssl.oslo "service" dict -}}{{- end -}} {{- if not .ssl.oslo.service.sslutils -}}{{- set .ssl.oslo.service "sslutils" dict -}}{{- end -}} {{- if not .webhook -}}{{- set . "webhook" dict -}}{{- end -}} {{- if not .webhook.senlin -}}{{- set .webhook "senlin" dict -}}{{- end -}} {{- if not .webhook.senlin.config -}}{{- set .webhook.senlin "config" dict -}}{{- end -}} {{- if not .zaqar -}}{{- set . "zaqar" dict -}}{{- end -}} {{- if not .zaqar.senlin -}}{{- set .zaqar "senlin" dict -}}{{- end -}} {{- if not .zaqar.senlin.config -}}{{- set .zaqar.senlin "config" dict -}}{{- end -}} {{- end -}} {{- define "senlin.conf.senlin" -}} [DEFAULT] # # From oslo.log # # If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value) # Note: This option can be changed without restarting. # from .default.oslo.log.debug {{ if not .default.oslo.log.debug }}#{{ end }}debug = {{ .default.oslo.log.debug | default "false" }} # DEPRECATED: If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean # value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # from .default.oslo.log.verbose {{ if not .default.oslo.log.verbose }}#{{ end }}verbose = {{ .default.oslo.log.verbose | default "true" }} # The name of a logging configuration file. This file is appended to any existing logging configuration files. For # details about logging configuration files, see the Python logging module documentation. Note that when logging # configuration files are used then all logging configuration is set in the configuration file and other logging # configuration options are ignored (for example, logging_context_format_string). (string value) # Note: This option can be changed without restarting. # Deprecated group/name - [DEFAULT]/log_config # from .default.oslo.log.log_config_append {{ if not .default.oslo.log.log_config_append }}#{{ end }}log_config_append = {{ .default.oslo.log.log_config_append | default "" }} # Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if # log_config_append is set. (string value) # from .default.oslo.log.log_date_format {{ if not .default.oslo.log.log_date_format }}#{{ end }}log_date_format = {{ .default.oslo.log.log_date_format | default "%Y-%m-%d %H:%M:%S" }} # (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by # use_stderr. This option is ignored if log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logfile # from .default.oslo.log.log_file {{ if not .default.oslo.log.log_file }}#{{ end }}log_file = {{ .default.oslo.log.log_file | default "" }} # (Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set. # (string value) # Deprecated group/name - [DEFAULT]/logdir # from .default.oslo.log.log_dir {{ if not .default.oslo.log.log_dir }}#{{ end }}log_dir = {{ .default.oslo.log.log_dir | default "" }} # Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new # log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform # is used. This option is ignored if log_config_append is set. (boolean value) # from .default.oslo.log.watch_log_file {{ if not .default.oslo.log.watch_log_file }}#{{ end }}watch_log_file = {{ .default.oslo.log.watch_log_file | default "false" }} # Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option # is ignored if log_config_append is set. (boolean value) # from .default.oslo.log.use_syslog {{ if not .default.oslo.log.use_syslog }}#{{ end }}use_syslog = {{ .default.oslo.log.use_syslog | default "false" }} # Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value) # from .default.oslo.log.syslog_log_facility {{ if not .default.oslo.log.syslog_log_facility }}#{{ end }}syslog_log_facility = {{ .default.oslo.log.syslog_log_facility | default "LOG_USER" }} # Log output to standard error. This option is ignored if log_config_append is set. (boolean value) # from .default.oslo.log.use_stderr {{ if not .default.oslo.log.use_stderr }}#{{ end }}use_stderr = {{ .default.oslo.log.use_stderr | default "true" }} # Format string to use for log messages with context. (string value) # from .default.oslo.log.logging_context_format_string {{ if not .default.oslo.log.logging_context_format_string }}#{{ end }}logging_context_format_string = {{ .default.oslo.log.logging_context_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s" }} # Format string to use for log messages when context is undefined. (string value) # from .default.oslo.log.logging_default_format_string {{ if not .default.oslo.log.logging_default_format_string }}#{{ end }}logging_default_format_string = {{ .default.oslo.log.logging_default_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s" }} # Additional data to append to log message when logging level for the message is DEBUG. (string value) # from .default.oslo.log.logging_debug_format_suffix {{ if not .default.oslo.log.logging_debug_format_suffix }}#{{ end }}logging_debug_format_suffix = {{ .default.oslo.log.logging_debug_format_suffix | default "%(funcName)s %(pathname)s:%(lineno)d" }} # Prefix each line of exception output with this format. (string value) # from .default.oslo.log.logging_exception_prefix {{ if not .default.oslo.log.logging_exception_prefix }}#{{ end }}logging_exception_prefix = {{ .default.oslo.log.logging_exception_prefix | default "%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s" }} # Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value) # from .default.oslo.log.logging_user_identity_format {{ if not .default.oslo.log.logging_user_identity_format }}#{{ end }}logging_user_identity_format = {{ .default.oslo.log.logging_user_identity_format | default "%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s" }} # List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list # value) # from .default.oslo.log.default_log_levels {{ if not .default.oslo.log.default_log_levels }}#{{ end }}default_log_levels = {{ .default.oslo.log.default_log_levels | default "amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO" }} # Enables or disables publication of error events. (boolean value) # from .default.oslo.log.publish_errors {{ if not .default.oslo.log.publish_errors }}#{{ end }}publish_errors = {{ .default.oslo.log.publish_errors | default "false" }} # The format for an instance that is passed with the log message. (string value) # from .default.oslo.log.instance_format {{ if not .default.oslo.log.instance_format }}#{{ end }}instance_format = {{ .default.oslo.log.instance_format | default "\"[instance: %(uuid)s] \"" }} # The format for an instance UUID that is passed with the log message. (string value) # from .default.oslo.log.instance_uuid_format {{ if not .default.oslo.log.instance_uuid_format }}#{{ end }}instance_uuid_format = {{ .default.oslo.log.instance_uuid_format | default "\"[instance: %(uuid)s] \"" }} # Enables or disables fatal status of deprecations. (boolean value) # from .default.oslo.log.fatal_deprecations {{ if not .default.oslo.log.fatal_deprecations }}#{{ end }}fatal_deprecations = {{ .default.oslo.log.fatal_deprecations | default "false" }} # # From oslo.messaging # # Size of RPC connection pool. (integer value) # Deprecated group/name - [DEFAULT]/rpc_conn_pool_size # from .default.oslo.messaging.rpc_conn_pool_size {{ if not .default.oslo.messaging.rpc_conn_pool_size }}#{{ end }}rpc_conn_pool_size = {{ .default.oslo.messaging.rpc_conn_pool_size | default "30" }} # The pool size limit for connections expiration policy (integer value) # from .default.oslo.messaging.conn_pool_min_size {{ if not .default.oslo.messaging.conn_pool_min_size }}#{{ end }}conn_pool_min_size = {{ .default.oslo.messaging.conn_pool_min_size | default "2" }} # The time-to-live in sec of idle connections in the pool (integer value) # from .default.oslo.messaging.conn_pool_ttl {{ if not .default.oslo.messaging.conn_pool_ttl }}#{{ end }}conn_pool_ttl = {{ .default.oslo.messaging.conn_pool_ttl | default "1200" }} # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or # resolve to this address. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address # from .default.oslo.messaging.rpc_zmq_bind_address {{ if not .default.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .default.oslo.messaging.rpc_zmq_bind_address | default "*" }} # MatchMaker driver. (string value) # Allowed values: redis, dummy # Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker # from .default.oslo.messaging.rpc_zmq_matchmaker {{ if not .default.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .default.oslo.messaging.rpc_zmq_matchmaker | default "redis" }} # Number of ZeroMQ contexts, defaults to 1. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_contexts # from .default.oslo.messaging.rpc_zmq_contexts {{ if not .default.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .default.oslo.messaging.rpc_zmq_contexts | default "1" }} # Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog # from .default.oslo.messaging.rpc_zmq_topic_backlog {{ if not .default.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .default.oslo.messaging.rpc_zmq_topic_backlog | default "" }} # Directory for holding IPC sockets. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir # from .default.oslo.messaging.rpc_zmq_ipc_dir {{ if not .default.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .default.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }} # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string # value) # Deprecated group/name - [DEFAULT]/rpc_zmq_host # from .default.oslo.messaging.rpc_zmq_host {{ if not .default.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .default.oslo.messaging.rpc_zmq_host | default "localhost" }} # Seconds to wait before a cast expires (TTL). The default value of -1 specifies an infinite linger period. The value # of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Only # supported by impl_zmq. (integer value) # Deprecated group/name - [DEFAULT]/rpc_cast_timeout # from .default.oslo.messaging.rpc_cast_timeout {{ if not .default.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .default.oslo.messaging.rpc_cast_timeout | default "-1" }} # The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer # value) # Deprecated group/name - [DEFAULT]/rpc_poll_timeout # from .default.oslo.messaging.rpc_poll_timeout {{ if not .default.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .default.oslo.messaging.rpc_poll_timeout | default "1" }} # Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value) # Deprecated group/name - [DEFAULT]/zmq_target_expire # from .default.oslo.messaging.zmq_target_expire {{ if not .default.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .default.oslo.messaging.zmq_target_expire | default "300" }} # Update period in seconds of a name service record about existing target. (integer value) # Deprecated group/name - [DEFAULT]/zmq_target_update # from .default.oslo.messaging.zmq_target_update {{ if not .default.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .default.oslo.messaging.zmq_target_update | default "180" }} # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value) # Deprecated group/name - [DEFAULT]/use_pub_sub # from .default.oslo.messaging.use_pub_sub {{ if not .default.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .default.oslo.messaging.use_pub_sub | default "true" }} # Use ROUTER remote proxy. (boolean value) # Deprecated group/name - [DEFAULT]/use_router_proxy # from .default.oslo.messaging.use_router_proxy {{ if not .default.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .default.oslo.messaging.use_router_proxy | default "true" }} # Minimal port number for random ports range. (port value) # Minimum value: 0 # Maximum value: 65535 # Deprecated group/name - [DEFAULT]/rpc_zmq_min_port # from .default.oslo.messaging.rpc_zmq_min_port {{ if not .default.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .default.oslo.messaging.rpc_zmq_min_port | default "49153" }} # Maximal port number for random ports range. (integer value) # Minimum value: 1 # Maximum value: 65536 # Deprecated group/name - [DEFAULT]/rpc_zmq_max_port # from .default.oslo.messaging.rpc_zmq_max_port {{ if not .default.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .default.oslo.messaging.rpc_zmq_max_port | default "65536" }} # Number of retries to find free port number before fail with ZMQBindError. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries # from .default.oslo.messaging.rpc_zmq_bind_port_retries {{ if not .default.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .default.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }} # Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value) # Allowed values: json, msgpack # Deprecated group/name - [DEFAULT]/rpc_zmq_serialization # from .default.oslo.messaging.rpc_zmq_serialization {{ if not .default.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .default.oslo.messaging.rpc_zmq_serialization | default "json" }} # This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. # False means to keep queue and messages even if server is disconnected, when the server appears we send all # accumulated messages to it. (boolean value) # from .default.oslo.messaging.zmq_immediate {{ if not .default.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .default.oslo.messaging.zmq_immediate | default "false" }} # Size of executor thread pool. (integer value) # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size # from .default.oslo.messaging.executor_thread_pool_size {{ if not .default.oslo.messaging.executor_thread_pool_size }}#{{ end }}executor_thread_pool_size = {{ .default.oslo.messaging.executor_thread_pool_size | default "64" }} # Seconds to wait for a response from a call. (integer value) # from .default.oslo.messaging.rpc_response_timeout {{ if not .default.oslo.messaging.rpc_response_timeout }}#{{ end }}rpc_response_timeout = {{ .default.oslo.messaging.rpc_response_timeout | default "60" }} # A URL representing the messaging driver to use and its full configuration. (string value) # from .default.oslo.messaging.transport_url {{ if not .default.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .default.oslo.messaging.transport_url | default "" }} # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .default.oslo.messaging.rpc_backend {{ if not .default.oslo.messaging.rpc_backend }}#{{ end }}rpc_backend = {{ .default.oslo.messaging.rpc_backend | default "rabbit" }} # The default exchange under which topics are scoped. May be overridden by an exchange name specified in the # transport_url option. (string value) # from .default.oslo.messaging.control_exchange {{ if not .default.oslo.messaging.control_exchange }}#{{ end }}control_exchange = {{ .default.oslo.messaging.control_exchange | default "openstack" }} # # From oslo.service.periodic_task # # Some periodic tasks can be run in a separate process. Should we run them here? (boolean value) # from .default.oslo.service.periodic_task.run_external_periodic_tasks {{ if not .default.oslo.service.periodic_task.run_external_periodic_tasks }}#{{ end }}run_external_periodic_tasks = {{ .default.oslo.service.periodic_task.run_external_periodic_tasks | default "true" }} # # From oslo.service.service # # Enable eventlet backdoor. Acceptable values are 0, , and :, where 0 results in listening on a # random tcp port number; results in listening on the specified port number (and not enabling backdoor if that # port is in use); and : results in listening on the smallest unused port number within the specified range # of port numbers. The chosen port is displayed in the service's log file. (string value) # from .default.oslo.service.service.backdoor_port {{ if not .default.oslo.service.service.backdoor_port }}#{{ end }}backdoor_port = {{ .default.oslo.service.service.backdoor_port | default "" }} # Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is # mutually exclusive with 'backdoor_port' in that only one should be provided. If both are provided then the existence # of this option overrides the usage of that option. (string value) # from .default.oslo.service.service.backdoor_socket {{ if not .default.oslo.service.service.backdoor_socket }}#{{ end }}backdoor_socket = {{ .default.oslo.service.service.backdoor_socket | default "" }} # Enables or disables logging values of all registered options when starting a service (at DEBUG level). (boolean # value) # from .default.oslo.service.service.log_options {{ if not .default.oslo.service.service.log_options }}#{{ end }}log_options = {{ .default.oslo.service.service.log_options | default "true" }} # Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait. (integer value) # from .default.oslo.service.service.graceful_shutdown_timeout {{ if not .default.oslo.service.service.graceful_shutdown_timeout }}#{{ end }}graceful_shutdown_timeout = {{ .default.oslo.service.service.graceful_shutdown_timeout | default "60" }} # # From senlin.config # # Default cloud backend to use. (string value) # from .default.senlin.config.cloud_backend {{ if not .default.senlin.config.cloud_backend }}#{{ end }}cloud_backend = {{ .default.senlin.config.cloud_backend | default "openstack" }} # Name of the engine node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address. # (string value) # from .default.senlin.config.host {{ if not .default.senlin.config.host }}#{{ end }}host = {{ .default.senlin.config.host | default "aaed021d3eb8" }} # Seconds between running periodic tasks. (integer value) # from .default.senlin.config.periodic_interval {{ if not .default.senlin.config.periodic_interval }}#{{ end }}periodic_interval = {{ .default.senlin.config.periodic_interval | default "60" }} # Seconds between periodic tasks to be called (integer value) # from .default.senlin.config.periodic_interval_max {{ if not .default.senlin.config.periodic_interval_max }}#{{ end }}periodic_interval_max = {{ .default.senlin.config.periodic_interval_max | default "120" }} # Range of seconds to randomly delay when starting the periodic task scheduler to reduce stampeding. (Disable by # setting to 0) (integer value) # from .default.senlin.config.periodic_fuzzy_delay {{ if not .default.senlin.config.periodic_fuzzy_delay }}#{{ end }}periodic_fuzzy_delay = {{ .default.senlin.config.periodic_fuzzy_delay | default "10" }} # Number of senlin-engine processes to fork and run. (integer value) # from .default.senlin.config.num_engine_workers {{ if not .default.senlin.config.num_engine_workers }}#{{ end }}num_engine_workers = {{ .default.senlin.config.num_engine_workers | default "1" }} # The directory to search for environment files. (string value) # from .default.senlin.config.environment_dir {{ if not .default.senlin.config.environment_dir }}#{{ end }}environment_dir = {{ .default.senlin.config.environment_dir | default "/etc/senlin/environments" }} # Maximum nodes allowed per top-level cluster. (integer value) # from .default.senlin.config.max_nodes_per_cluster {{ if not .default.senlin.config.max_nodes_per_cluster }}#{{ end }}max_nodes_per_cluster = {{ .default.senlin.config.max_nodes_per_cluster | default "1000" }} # Maximum number of clusters any one project may have active at one time. (integer value) # from .default.senlin.config.max_clusters_per_project {{ if not .default.senlin.config.max_clusters_per_project }}#{{ end }}max_clusters_per_project = {{ .default.senlin.config.max_clusters_per_project | default "100" }} # Timeout in seconds for actions. (integer value) # from .default.senlin.config.default_action_timeout {{ if not .default.senlin.config.default_action_timeout }}#{{ end }}default_action_timeout = {{ .default.senlin.config.default_action_timeout | default "3600" }} # Maximum number of node actions that each engine worker can schedule consecutively per batch. 0 means no limit. # (integer value) # from .default.senlin.config.max_actions_per_batch {{ if not .default.senlin.config.max_actions_per_batch }}#{{ end }}max_actions_per_batch = {{ .default.senlin.config.max_actions_per_batch | default "0" }} # Seconds to pause between scheduling two consecutive batches of node actions. (integer value) # from .default.senlin.config.batch_interval {{ if not .default.senlin.config.batch_interval }}#{{ end }}batch_interval = {{ .default.senlin.config.batch_interval | default "3" }} # Number of times trying to grab a lock. (integer value) # from .default.senlin.config.lock_retry_times {{ if not .default.senlin.config.lock_retry_times }}#{{ end }}lock_retry_times = {{ .default.senlin.config.lock_retry_times | default "3" }} # Number of seconds between lock retries. (integer value) # from .default.senlin.config.lock_retry_interval {{ if not .default.senlin.config.lock_retry_interval }}#{{ end }}lock_retry_interval = {{ .default.senlin.config.lock_retry_interval | default "10" }} # RPC timeout for the engine liveness check that is used for cluster locking. (integer value) # from .default.senlin.config.engine_life_check_timeout {{ if not .default.senlin.config.engine_life_check_timeout }}#{{ end }}engine_life_check_timeout = {{ .default.senlin.config.engine_life_check_timeout | default "2" }} # Flag to indicate whether to enforce unique names for Senlin objects belonging to the same project. (boolean value) # from .default.senlin.config.name_unique {{ if not .default.senlin.config.name_unique }}#{{ end }}name_unique = {{ .default.senlin.config.name_unique | default "false" }} # Default region name used to get services endpoints. (string value) # from .default.senlin.config.default_region_name {{ if not .default.senlin.config.default_region_name }}#{{ end }}default_region_name = {{ .default.senlin.config.default_region_name | default "" }} # Maximum raw byte size of data from web response. (integer value) # from .default.senlin.config.max_response_size {{ if not .default.senlin.config.max_response_size }}#{{ end }}max_response_size = {{ .default.senlin.config.max_response_size | default "524288" }} [authentication] # # From senlin.config # # Complete public identity V3 API endpoint. (string value) # from .authentication.senlin.config.auth_url {{ if not .authentication.senlin.config.auth_url }}#{{ end }}auth_url = {{ .authentication.senlin.config.auth_url | default "" }} # Senlin service user name (string value) # from .authentication.senlin.config.service_username {{ if not .authentication.senlin.config.service_username }}#{{ end }}service_username = {{ .authentication.senlin.config.service_username | default "senlin" }} # Password specified for the Senlin service user. (string value) # from .authentication.senlin.config.service_password {{ if not .authentication.senlin.config.service_password }}#{{ end }}service_password = {{ .authentication.senlin.config.service_password | default "" }} # Name of the service project. (string value) # from .authentication.senlin.config.service_project_name {{ if not .authentication.senlin.config.service_project_name }}#{{ end }}service_project_name = {{ .authentication.senlin.config.service_project_name | default "service" }} # Name of the domain for the service user. (string value) # from .authentication.senlin.config.service_user_domain {{ if not .authentication.senlin.config.service_user_domain }}#{{ end }}service_user_domain = {{ .authentication.senlin.config.service_user_domain | default "Default" }} # Name of the domain for the service project. (string value) # from .authentication.senlin.config.service_project_domain {{ if not .authentication.senlin.config.service_project_domain }}#{{ end }}service_project_domain = {{ .authentication.senlin.config.service_project_domain | default "Default" }} [database] # # From oslo.db # # DEPRECATED: The file name to use with SQLite. (string value) # Deprecated group/name - [DEFAULT]/sqlite_db # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Should use config option connection or slave_connection to connect the database. # from .database.oslo.db.sqlite_db {{ if not .database.oslo.db.sqlite_db }}#{{ end }}sqlite_db = {{ .database.oslo.db.sqlite_db | default "oslo.sqlite" }} # If True, SQLite uses synchronous mode. (boolean value) # Deprecated group/name - [DEFAULT]/sqlite_synchronous # from .database.oslo.db.sqlite_synchronous {{ if not .database.oslo.db.sqlite_synchronous }}#{{ end }}sqlite_synchronous = {{ .database.oslo.db.sqlite_synchronous | default "true" }} # The back end to use for the database. (string value) # Deprecated group/name - [DEFAULT]/db_backend # from .database.oslo.db.backend {{ if not .database.oslo.db.backend }}#{{ end }}backend = {{ .database.oslo.db.backend | default "sqlalchemy" }} # The SQLAlchemy connection string to use to connect to the database. (string value) # Deprecated group/name - [DEFAULT]/sql_connection # Deprecated group/name - [DATABASE]/sql_connection # Deprecated group/name - [sql]/connection # from .database.oslo.db.connection {{ if not .database.oslo.db.connection }}#{{ end }}connection = {{ .database.oslo.db.connection | default "" }} # The SQLAlchemy connection string to use to connect to the slave database. (string value) # from .database.oslo.db.slave_connection {{ if not .database.oslo.db.slave_connection }}#{{ end }}slave_connection = {{ .database.oslo.db.slave_connection | default "" }} # The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To # use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode= (string # value) # from .database.oslo.db.mysql_sql_mode {{ if not .database.oslo.db.mysql_sql_mode }}#{{ end }}mysql_sql_mode = {{ .database.oslo.db.mysql_sql_mode | default "TRADITIONAL" }} # Timeout before idle SQL connections are reaped. (integer value) # Deprecated group/name - [DEFAULT]/sql_idle_timeout # Deprecated group/name - [DATABASE]/sql_idle_timeout # Deprecated group/name - [sql]/idle_timeout # from .database.oslo.db.idle_timeout {{ if not .database.oslo.db.idle_timeout }}#{{ end }}idle_timeout = {{ .database.oslo.db.idle_timeout | default "3600" }} # Minimum number of SQL connections to keep open in a pool. (integer value) # Deprecated group/name - [DEFAULT]/sql_min_pool_size # Deprecated group/name - [DATABASE]/sql_min_pool_size # from .database.oslo.db.min_pool_size {{ if not .database.oslo.db.min_pool_size }}#{{ end }}min_pool_size = {{ .database.oslo.db.min_pool_size | default "1" }} # Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_pool_size # Deprecated group/name - [DATABASE]/sql_max_pool_size # from .database.oslo.db.max_pool_size {{ if not .database.oslo.db.max_pool_size }}#{{ end }}max_pool_size = {{ .database.oslo.db.max_pool_size | default "5" }} # Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count. (integer # value) # Deprecated group/name - [DEFAULT]/sql_max_retries # Deprecated group/name - [DATABASE]/sql_max_retries # from .database.oslo.db.max_retries {{ if not .database.oslo.db.max_retries }}#{{ end }}max_retries = {{ .database.oslo.db.max_retries | default "10" }} # Interval between retries of opening a SQL connection. (integer value) # Deprecated group/name - [DEFAULT]/sql_retry_interval # Deprecated group/name - [DATABASE]/reconnect_interval # from .database.oslo.db.retry_interval {{ if not .database.oslo.db.retry_interval }}#{{ end }}retry_interval = {{ .database.oslo.db.retry_interval | default "10" }} # If set, use this value for max_overflow with SQLAlchemy. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_overflow # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow # from .database.oslo.db.max_overflow {{ if not .database.oslo.db.max_overflow }}#{{ end }}max_overflow = {{ .database.oslo.db.max_overflow | default "50" }} # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer value) # Minimum value: 0 # Maximum value: 100 # Deprecated group/name - [DEFAULT]/sql_connection_debug # from .database.oslo.db.connection_debug {{ if not .database.oslo.db.connection_debug }}#{{ end }}connection_debug = {{ .database.oslo.db.connection_debug | default "0" }} # Add Python stack traces to SQL as comment strings. (boolean value) # Deprecated group/name - [DEFAULT]/sql_connection_trace # from .database.oslo.db.connection_trace {{ if not .database.oslo.db.connection_trace }}#{{ end }}connection_trace = {{ .database.oslo.db.connection_trace | default "false" }} # If set, use this value for pool_timeout with SQLAlchemy. (integer value) # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout # from .database.oslo.db.pool_timeout {{ if not .database.oslo.db.pool_timeout }}#{{ end }}pool_timeout = {{ .database.oslo.db.pool_timeout | default "" }} # Enable the experimental use of database reconnect on connection lost. (boolean value) # from .database.oslo.db.use_db_reconnect {{ if not .database.oslo.db.use_db_reconnect }}#{{ end }}use_db_reconnect = {{ .database.oslo.db.use_db_reconnect | default "false" }} # Seconds between retries of a database transaction. (integer value) # from .database.oslo.db.db_retry_interval {{ if not .database.oslo.db.db_retry_interval }}#{{ end }}db_retry_interval = {{ .database.oslo.db.db_retry_interval | default "1" }} # If True, increases the interval between retries of a database operation up to db_max_retry_interval. (boolean value) # from .database.oslo.db.db_inc_retry_interval {{ if not .database.oslo.db.db_inc_retry_interval }}#{{ end }}db_inc_retry_interval = {{ .database.oslo.db.db_inc_retry_interval | default "true" }} # If db_inc_retry_interval is set, the maximum seconds between retries of a database operation. (integer value) # from .database.oslo.db.db_max_retry_interval {{ if not .database.oslo.db.db_max_retry_interval }}#{{ end }}db_max_retry_interval = {{ .database.oslo.db.db_max_retry_interval | default "10" }} # Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an # infinite retry count. (integer value) # from .database.oslo.db.db_max_retries {{ if not .database.oslo.db.db_max_retries }}#{{ end }}db_max_retries = {{ .database.oslo.db.db_max_retries | default "20" }} [keystone_authtoken] # FIXME(alanmeadows) - added the next several lines because oslo gen config refuses to generate the line items required in keystonemiddleware # for authentication - while it does support an "auth_section" parameter to locate these elsewhere, it would be a strange divergence # from how neutron keystone authentication is stored today - ocata and later appear to use a "service" user section which can house these details # and does successfully generate beyond newton, so likely this whole section will be removed the next time we generate this file {{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "" }} {{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "" }} {{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_name }}#{{ end }}project_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_name | default "" }} {{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name }}#{{ end }}project_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name | default "" }} {{ if not .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name }}#{{ end }}user_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name | default "" }} {{ if not .keystone_authtoken.keystonemiddleware.auth_token.username }}#{{ end }}username = {{ .keystone_authtoken.keystonemiddleware.auth_token.username | default "" }} {{ if not .keystone_authtoken.keystonemiddleware.auth_token.password }}#{{ end }}password = {{ .keystone_authtoken.keystonemiddleware.auth_token.password | default "" }} # FIXME(alanmeadows) - added for some newton images using older keystoneauth1 libs but are still "newton" {{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "" }} # # From keystonemiddleware.auth_token # # Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible # by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint # should ideally be unversioned, client support in the wild varies. If you're using a versioned v2 endpoint here, # then this should *not* be the same endpoint the service user utilizes for validating tokens, because normal end # users may not be able to reach that endpoint. (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.auth_uri {{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_uri }}#{{ end }}auth_uri = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_uri | default "" }} # API version of the admin Identity API endpoint. (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.auth_version {{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_version }}#{{ end }}auth_version = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_version | default "" }} # Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream # WSGI components. (boolean value) # from .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision {{ if not .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision }}#{{ end }}delay_auth_decision = {{ .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision | default "false" }} # Request timeout value for communicating with Identity API server. (integer value) # from .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout {{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout }}#{{ end }}http_connect_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout | default "" }} # How many times are we trying to reconnect when communicating with Identity API Server. (integer value) # from .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries {{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries }}#{{ end }}http_request_max_retries = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries | default "3" }} # Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift # cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the # ``memcached_servers`` option instead. (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.cache {{ if not .keystone_authtoken.keystonemiddleware.auth_token.cache }}#{{ end }}cache = {{ .keystone_authtoken.keystonemiddleware.auth_token.cache | default "" }} # Required if identity server requires client certificate (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.certfile {{ if not .keystone_authtoken.keystonemiddleware.auth_token.certfile }}#{{ end }}certfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.certfile | default "" }} # Required if identity server requires client certificate (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.keyfile {{ if not .keystone_authtoken.keystonemiddleware.auth_token.keyfile }}#{{ end }}keyfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.keyfile | default "" }} # A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs. (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.cafile {{ if not .keystone_authtoken.keystonemiddleware.auth_token.cafile }}#{{ end }}cafile = {{ .keystone_authtoken.keystonemiddleware.auth_token.cafile | default "" }} # Verify HTTPS connections. (boolean value) # from .keystone_authtoken.keystonemiddleware.auth_token.insecure {{ if not .keystone_authtoken.keystonemiddleware.auth_token.insecure }}#{{ end }}insecure = {{ .keystone_authtoken.keystonemiddleware.auth_token.insecure | default "false" }} # The region in which the identity server can be found. (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.region_name {{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "" }} # Directory used to cache files related to PKI tokens. (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.signing_dir {{ if not .keystone_authtoken.keystonemiddleware.auth_token.signing_dir }}#{{ end }}signing_dir = {{ .keystone_authtoken.keystonemiddleware.auth_token.signing_dir | default "" }} # Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached # in-process. (list value) # Deprecated group/name - [keystone_authtoken]/memcache_servers # from .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers {{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers }}#{{ end }}memcached_servers = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers | default "" }} # In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a # configurable duration (in seconds). Set to -1 to disable caching completely. (integer value) # from .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time {{ if not .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time }}#{{ end }}token_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time | default "300" }} # Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A # high number of revocation events combined with a low cache duration may significantly reduce performance. Only valid # for PKI tokens. (integer value) # from .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time {{ if not .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time }}#{{ end }}revocation_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time | default "10" }} # (Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, # token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the # cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization. # (string value) # Allowed values: None, MAC, ENCRYPT # from .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy {{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy }}#{{ end }}memcache_security_strategy = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy | default "None" }} # (Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation. (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key {{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key }}#{{ end }}memcache_secret_key = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key | default "" }} # (Optional) Number of seconds memcached server is considered dead before it is tried again. (integer value) # from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry {{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry }}#{{ end }}memcache_pool_dead_retry = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry | default "300" }} # (Optional) Maximum total number of open connections to every memcached server. (integer value) # from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize {{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize }}#{{ end }}memcache_pool_maxsize = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize | default "10" }} # (Optional) Socket timeout in seconds for communicating with a memcached server. (integer value) # from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout {{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout }}#{{ end }}memcache_pool_socket_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout | default "3" }} # (Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed. (integer # value) # from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout {{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout }}#{{ end }}memcache_pool_unused_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout | default "60" }} # (Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool. (integer # value) # from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout {{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout }}#{{ end }}memcache_pool_conn_get_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout | default "10" }} # (Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x. # (boolean value) # from .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool {{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool }}#{{ end }}memcache_use_advanced_pool = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool | default "false" }} # (Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service # catalog on token validation and will not set the X-Service-Catalog header. (boolean value) # from .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog {{ if not .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog }}#{{ end }}include_service_catalog = {{ .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog | default "true" }} # Used to control the use and type of token binding. Can be set to: "disabled" to not check token binding. "permissive" # (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. # "strict" like "permissive" but if the bind type is unknown the token will be rejected. "required" any form of token # binding is needed to be allowed. Finally the name of a binding method that must be present in tokens. (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind {{ if not .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind }}#{{ end }}enforce_token_bind = {{ .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind | default "permissive" }} # If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the # identity server. (boolean value) # from .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached {{ if not .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached }}#{{ end }}check_revocations_for_cached = {{ .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached | default "false" }} # Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those # supported by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one # first for performance. The result of the first hash will be stored in the cache. This will typically be set to # multiple values only while migrating from a less secure algorithm to a more secure one. Once all the old tokens are # expired this option should be set to a single value for better performance. (list value) # from .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms {{ if not .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms }}#{{ end }}hash_algorithms = {{ .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms | default "md5" }} # Authentication type to load (string value) # Deprecated group/name - [keystone_authtoken]/auth_plugin # from .keystone_authtoken.keystonemiddleware.auth_token.auth_type {{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_type }}#{{ end }}auth_type = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_type | default "" }} # Config Section from which to load plugin specific options (string value) # from .keystone_authtoken.keystonemiddleware.auth_token.auth_section {{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_section }}#{{ end }}auth_section = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_section | default "" }} [matchmaker_redis] # # From oslo.messaging # # DEPRECATED: Host to locate redis. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .matchmaker_redis.oslo.messaging.host {{ if not .matchmaker_redis.oslo.messaging.host }}#{{ end }}host = {{ .matchmaker_redis.oslo.messaging.host | default "127.0.0.1" }} # DEPRECATED: Use this port to connect to redis host. (port value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .matchmaker_redis.oslo.messaging.port {{ if not .matchmaker_redis.oslo.messaging.port }}#{{ end }}port = {{ .matchmaker_redis.oslo.messaging.port | default "6379" }} # DEPRECATED: Password for Redis server (optional). (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .matchmaker_redis.oslo.messaging.password {{ if not .matchmaker_redis.oslo.messaging.password }}#{{ end }}password = {{ .matchmaker_redis.oslo.messaging.password | default "" }} # DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode) e.g. [host:port, host1:port ... ] # (list value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .matchmaker_redis.oslo.messaging.sentinel_hosts {{ if not .matchmaker_redis.oslo.messaging.sentinel_hosts }}#{{ end }}sentinel_hosts = {{ .matchmaker_redis.oslo.messaging.sentinel_hosts | default "" }} # Redis replica set name. (string value) # from .matchmaker_redis.oslo.messaging.sentinel_group_name {{ if not .matchmaker_redis.oslo.messaging.sentinel_group_name }}#{{ end }}sentinel_group_name = {{ .matchmaker_redis.oslo.messaging.sentinel_group_name | default "oslo-messaging-zeromq" }} # Time in ms to wait between connection attempts. (integer value) # from .matchmaker_redis.oslo.messaging.wait_timeout {{ if not .matchmaker_redis.oslo.messaging.wait_timeout }}#{{ end }}wait_timeout = {{ .matchmaker_redis.oslo.messaging.wait_timeout | default "2000" }} # Time in ms to wait before the transaction is killed. (integer value) # from .matchmaker_redis.oslo.messaging.check_timeout {{ if not .matchmaker_redis.oslo.messaging.check_timeout }}#{{ end }}check_timeout = {{ .matchmaker_redis.oslo.messaging.check_timeout | default "20000" }} # Timeout in ms on blocking socket operations (integer value) # from .matchmaker_redis.oslo.messaging.socket_timeout {{ if not .matchmaker_redis.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .matchmaker_redis.oslo.messaging.socket_timeout | default "10000" }} [oslo_messaging_amqp] # # From oslo.messaging # # Name for the AMQP container. must be globally unique. Defaults to a generated UUID (string value) # Deprecated group/name - [amqp1]/container_name # from .oslo_messaging_amqp.oslo.messaging.container_name {{ if not .oslo_messaging_amqp.oslo.messaging.container_name }}#{{ end }}container_name = {{ .oslo_messaging_amqp.oslo.messaging.container_name | default "" }} # Timeout for inactive connections (in seconds) (integer value) # Deprecated group/name - [amqp1]/idle_timeout # from .oslo_messaging_amqp.oslo.messaging.idle_timeout {{ if not .oslo_messaging_amqp.oslo.messaging.idle_timeout }}#{{ end }}idle_timeout = {{ .oslo_messaging_amqp.oslo.messaging.idle_timeout | default "0" }} # Debug: dump AMQP frames to stdout (boolean value) # Deprecated group/name - [amqp1]/trace # from .oslo_messaging_amqp.oslo.messaging.trace {{ if not .oslo_messaging_amqp.oslo.messaging.trace }}#{{ end }}trace = {{ .oslo_messaging_amqp.oslo.messaging.trace | default "false" }} # CA certificate PEM file to verify server certificate (string value) # Deprecated group/name - [amqp1]/ssl_ca_file # from .oslo_messaging_amqp.oslo.messaging.ssl_ca_file {{ if not .oslo_messaging_amqp.oslo.messaging.ssl_ca_file }}#{{ end }}ssl_ca_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_ca_file | default "" }} # Identifying certificate PEM file to present to clients (string value) # Deprecated group/name - [amqp1]/ssl_cert_file # from .oslo_messaging_amqp.oslo.messaging.ssl_cert_file {{ if not .oslo_messaging_amqp.oslo.messaging.ssl_cert_file }}#{{ end }}ssl_cert_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_cert_file | default "" }} # Private key PEM file used to sign cert_file certificate (string value) # Deprecated group/name - [amqp1]/ssl_key_file # from .oslo_messaging_amqp.oslo.messaging.ssl_key_file {{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_file }}#{{ end }}ssl_key_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_file | default "" }} # Password for decrypting ssl_key_file (if encrypted) (string value) # Deprecated group/name - [amqp1]/ssl_key_password # from .oslo_messaging_amqp.oslo.messaging.ssl_key_password {{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_password }}#{{ end }}ssl_key_password = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_password | default "" }} # Accept clients using either SSL or plain TCP (boolean value) # Deprecated group/name - [amqp1]/allow_insecure_clients # from .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients {{ if not .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients }}#{{ end }}allow_insecure_clients = {{ .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients | default "false" }} # Space separated list of acceptable SASL mechanisms (string value) # Deprecated group/name - [amqp1]/sasl_mechanisms # from .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms {{ if not .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms }}#{{ end }}sasl_mechanisms = {{ .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms | default "" }} # Path to directory that contains the SASL configuration (string value) # Deprecated group/name - [amqp1]/sasl_config_dir # from .oslo_messaging_amqp.oslo.messaging.sasl_config_dir {{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_dir }}#{{ end }}sasl_config_dir = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_dir | default "" }} # Name of configuration file (without .conf suffix) (string value) # Deprecated group/name - [amqp1]/sasl_config_name # from .oslo_messaging_amqp.oslo.messaging.sasl_config_name {{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_name }}#{{ end }}sasl_config_name = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_name | default "" }} # User name for message broker authentication (string value) # Deprecated group/name - [amqp1]/username # from .oslo_messaging_amqp.oslo.messaging.username {{ if not .oslo_messaging_amqp.oslo.messaging.username }}#{{ end }}username = {{ .oslo_messaging_amqp.oslo.messaging.username | default "" }} # Password for message broker authentication (string value) # Deprecated group/name - [amqp1]/password # from .oslo_messaging_amqp.oslo.messaging.password {{ if not .oslo_messaging_amqp.oslo.messaging.password }}#{{ end }}password = {{ .oslo_messaging_amqp.oslo.messaging.password | default "" }} # Seconds to pause before attempting to re-connect. (integer value) # Minimum value: 1 # from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval {{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval }}#{{ end }}connection_retry_interval = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval | default "1" }} # Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt. (integer value) # Minimum value: 0 # from .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff {{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff }}#{{ end }}connection_retry_backoff = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff | default "2" }} # Maximum limit for connection_retry_interval + connection_retry_backoff (integer value) # Minimum value: 1 # from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max {{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max }}#{{ end }}connection_retry_interval_max = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max | default "30" }} # Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error. (integer value) # Minimum value: 1 # from .oslo_messaging_amqp.oslo.messaging.link_retry_delay {{ if not .oslo_messaging_amqp.oslo.messaging.link_retry_delay }}#{{ end }}link_retry_delay = {{ .oslo_messaging_amqp.oslo.messaging.link_retry_delay | default "10" }} # The deadline for an rpc reply message delivery. Only used when caller does not provide a timeout expiry. (integer # value) # Minimum value: 5 # from .oslo_messaging_amqp.oslo.messaging.default_reply_timeout {{ if not .oslo_messaging_amqp.oslo.messaging.default_reply_timeout }}#{{ end }}default_reply_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_reply_timeout | default "30" }} # The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry. # (integer value) # Minimum value: 5 # from .oslo_messaging_amqp.oslo.messaging.default_send_timeout {{ if not .oslo_messaging_amqp.oslo.messaging.default_send_timeout }}#{{ end }}default_send_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_send_timeout | default "30" }} # The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry. # (integer value) # Minimum value: 5 # from .oslo_messaging_amqp.oslo.messaging.default_notify_timeout {{ if not .oslo_messaging_amqp.oslo.messaging.default_notify_timeout }}#{{ end }}default_notify_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_notify_timeout | default "30" }} # Indicates the addressing mode used by the driver. # Permitted values: # 'legacy' - use legacy non-routable addressing # 'routable' - use routable addresses # 'dynamic' - use legacy addresses if the message bus does not support routing otherwise use routable addressing # (string value) # from .oslo_messaging_amqp.oslo.messaging.addressing_mode {{ if not .oslo_messaging_amqp.oslo.messaging.addressing_mode }}#{{ end }}addressing_mode = {{ .oslo_messaging_amqp.oslo.messaging.addressing_mode | default "dynamic" }} # address prefix used when sending to a specific server (string value) # Deprecated group/name - [amqp1]/server_request_prefix # from .oslo_messaging_amqp.oslo.messaging.server_request_prefix {{ if not .oslo_messaging_amqp.oslo.messaging.server_request_prefix }}#{{ end }}server_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.server_request_prefix | default "exclusive" }} # address prefix used when broadcasting to all servers (string value) # Deprecated group/name - [amqp1]/broadcast_prefix # from .oslo_messaging_amqp.oslo.messaging.broadcast_prefix {{ if not .oslo_messaging_amqp.oslo.messaging.broadcast_prefix }}#{{ end }}broadcast_prefix = {{ .oslo_messaging_amqp.oslo.messaging.broadcast_prefix | default "broadcast" }} # address prefix when sending to any server in group (string value) # Deprecated group/name - [amqp1]/group_request_prefix # from .oslo_messaging_amqp.oslo.messaging.group_request_prefix {{ if not .oslo_messaging_amqp.oslo.messaging.group_request_prefix }}#{{ end }}group_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.group_request_prefix | default "unicast" }} # Address prefix for all generated RPC addresses (string value) # from .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix {{ if not .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix }}#{{ end }}rpc_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix | default "openstack.org/om/rpc" }} # Address prefix for all generated Notification addresses (string value) # from .oslo_messaging_amqp.oslo.messaging.notify_address_prefix {{ if not .oslo_messaging_amqp.oslo.messaging.notify_address_prefix }}#{{ end }}notify_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.notify_address_prefix | default "openstack.org/om/notify" }} # Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages. # (string value) # from .oslo_messaging_amqp.oslo.messaging.multicast_address {{ if not .oslo_messaging_amqp.oslo.messaging.multicast_address }}#{{ end }}multicast_address = {{ .oslo_messaging_amqp.oslo.messaging.multicast_address | default "multicast" }} # Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to # identify messages sent to a single destination. (string value) # from .oslo_messaging_amqp.oslo.messaging.unicast_address {{ if not .oslo_messaging_amqp.oslo.messaging.unicast_address }}#{{ end }}unicast_address = {{ .oslo_messaging_amqp.oslo.messaging.unicast_address | default "unicast" }} # Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages # that should be delivered in a round-robin fashion across consumers. (string value) # from .oslo_messaging_amqp.oslo.messaging.anycast_address {{ if not .oslo_messaging_amqp.oslo.messaging.anycast_address }}#{{ end }}anycast_address = {{ .oslo_messaging_amqp.oslo.messaging.anycast_address | default "anycast" }} # Exchange name used in notification addresses. # Exchange name resolution precedence: # Target.exchange if set # else default_notification_exchange if set # else control_exchange if set # else 'notify' (string value) # from .oslo_messaging_amqp.oslo.messaging.default_notification_exchange {{ if not .oslo_messaging_amqp.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_notification_exchange | default "" }} # Exchange name used in RPC addresses. # Exchange name resolution precedence: # Target.exchange if set # else default_rpc_exchange if set # else control_exchange if set # else 'rpc' (string value) # from .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange {{ if not .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange | default "" }} # Window size for incoming RPC Reply messages. (integer value) # Minimum value: 1 # from .oslo_messaging_amqp.oslo.messaging.reply_link_credit {{ if not .oslo_messaging_amqp.oslo.messaging.reply_link_credit }}#{{ end }}reply_link_credit = {{ .oslo_messaging_amqp.oslo.messaging.reply_link_credit | default "200" }} # Window size for incoming RPC Request messages (integer value) # Minimum value: 1 # from .oslo_messaging_amqp.oslo.messaging.rpc_server_credit {{ if not .oslo_messaging_amqp.oslo.messaging.rpc_server_credit }}#{{ end }}rpc_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.rpc_server_credit | default "100" }} # Window size for incoming Notification messages (integer value) # Minimum value: 1 # from .oslo_messaging_amqp.oslo.messaging.notify_server_credit {{ if not .oslo_messaging_amqp.oslo.messaging.notify_server_credit }}#{{ end }}notify_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.notify_server_credit | default "100" }} [oslo_messaging_notifications] # # From oslo.messaging # # The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop # (multi valued) # Deprecated group/name - [DEFAULT]/notification_driver # from .oslo_messaging_notifications.oslo.messaging.driver (multiopt) {{ if not .oslo_messaging_notifications.oslo.messaging.driver }}#driver = {{ .oslo_messaging_notifications.oslo.messaging.driver | default "" }}{{ else }}{{ range .oslo_messaging_notifications.oslo.messaging.driver }}driver = {{ . }}{{ end }}{{ end }} # A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration # used for RPC. (string value) # Deprecated group/name - [DEFAULT]/notification_transport_url # from .oslo_messaging_notifications.oslo.messaging.transport_url {{ if not .oslo_messaging_notifications.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .oslo_messaging_notifications.oslo.messaging.transport_url | default "" }} # AMQP topic used for OpenStack notifications. (list value) # Deprecated group/name - [rpc_notifier2]/topics # Deprecated group/name - [DEFAULT]/notification_topics # from .oslo_messaging_notifications.oslo.messaging.topics {{ if not .oslo_messaging_notifications.oslo.messaging.topics }}#{{ end }}topics = {{ .oslo_messaging_notifications.oslo.messaging.topics | default "notifications" }} [oslo_messaging_rabbit] # # From oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_durable_queues # Deprecated group/name - [DEFAULT]/rabbit_durable_queues # from .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues {{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues }}#{{ end }}amqp_durable_queues = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues | default "false" }} # Auto-delete queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_auto_delete # from .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete {{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete }}#{{ end }}amqp_auto_delete = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete | default "false" }} # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 # may be available on some distributions. (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_version # from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version {{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version }}#{{ end }}kombu_ssl_version = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version | default "" }} # SSL key file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile # from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile {{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile }}#{{ end }}kombu_ssl_keyfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile | default "" }} # SSL cert file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_certfile # from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile {{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile }}#{{ end }}kombu_ssl_certfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile | default "" }} # SSL certification authority file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs # from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs {{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs }}#{{ end }}kombu_ssl_ca_certs = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs | default "" }} # How long to wait before reconnecting in response to an AMQP consumer cancel notification. (floating point value) # Deprecated group/name - [DEFAULT]/kombu_reconnect_delay # from .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay {{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay }}#{{ end }}kombu_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay | default "1.0" }} # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be # available in future versions. (string value) # from .oslo_messaging_rabbit.oslo.messaging.kombu_compression {{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_compression }}#{{ end }}kombu_compression = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_compression | default "" }} # How long to wait a missing client before abandoning to send it its replies. This value should not be longer than # rpc_response_timeout. (integer value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout # from .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout {{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout }}#{{ end }}kombu_missing_consumer_retry_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout | default "60" }} # Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. # Takes effect only if more than one RabbitMQ node is provided in config. (string value) # Allowed values: round-robin, shuffle # from .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy {{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy }}#{{ end }}kombu_failover_strategy = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy | default "round-robin" }} # DEPRECATED: The RabbitMQ broker address where a single node is used. (string value) # Deprecated group/name - [DEFAULT]/rabbit_host # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .oslo_messaging_rabbit.oslo.messaging.rabbit_host {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_host }}#{{ end }}rabbit_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_host | default "localhost" }} # DEPRECATED: The RabbitMQ broker port where a single node is used. (port value) # Minimum value: 0 # Maximum value: 65535 # Deprecated group/name - [DEFAULT]/rabbit_port # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .oslo_messaging_rabbit.oslo.messaging.rabbit_port {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_port }}#{{ end }}rabbit_port = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_port | default "5672" }} # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value) # Deprecated group/name - [DEFAULT]/rabbit_hosts # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts }}#{{ end }}rabbit_hosts = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts | default "$rabbit_host:$rabbit_port" }} # Connect over SSL for RabbitMQ. (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_use_ssl # from .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl }}#{{ end }}rabbit_use_ssl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl | default "false" }} # DEPRECATED: The RabbitMQ userid. (string value) # Deprecated group/name - [DEFAULT]/rabbit_userid # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .oslo_messaging_rabbit.oslo.messaging.rabbit_userid {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_userid }}#{{ end }}rabbit_userid = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_userid | default "guest" }} # DEPRECATED: The RabbitMQ password. (string value) # Deprecated group/name - [DEFAULT]/rabbit_password # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .oslo_messaging_rabbit.oslo.messaging.rabbit_password {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_password }}#{{ end }}rabbit_password = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_password | default "guest" }} # The RabbitMQ login method. (string value) # Deprecated group/name - [DEFAULT]/rabbit_login_method # from .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method }}#{{ end }}rabbit_login_method = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method | default "AMQPLAIN" }} # DEPRECATED: The RabbitMQ virtual host. (string value) # Deprecated group/name - [DEFAULT]/rabbit_virtual_host # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url # from .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host }}#{{ end }}rabbit_virtual_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host | default "/" }} # How frequently to retry connecting with RabbitMQ. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval }}#{{ end }}rabbit_retry_interval = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval | default "1" }} # How long to backoff for between retries when connecting to RabbitMQ. (integer value) # Deprecated group/name - [DEFAULT]/rabbit_retry_backoff # from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff }}#{{ end }}rabbit_retry_backoff = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff | default "2" }} # Maximum interval of RabbitMQ connection retries. Default is 30 seconds. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max }}#{{ end }}rabbit_interval_max = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max | default "30" }} # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count). (integer value) # Deprecated group/name - [DEFAULT]/rabbit_max_retries # This option is deprecated for removal. # Its value may be silently ignored in the future. # from .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries }}#{{ end }}rabbit_max_retries = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries | default "0" }} # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. # In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you # just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: # "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_ha_queues # from .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues }}#{{ end }}rabbit_ha_queues = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues | default "false" }} # Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration # of the TTL are automatically deleted. The parameter affects only reply and fanout queues. (integer value) # Minimum value: 1 # from .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl }}#{{ end }}rabbit_transient_queues_ttl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl | default "1800" }} # Specifies the number of messages to prefetch. Setting to zero allows unlimited messages. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count {{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count }}#{{ end }}rabbit_qos_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count | default "0" }} # Number of seconds after which the Rabbit broker is considered down if heartbeat's keep-alive fails (0 disable the # heartbeat). EXPERIMENTAL (integer value) # from .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold {{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold }}#{{ end }}heartbeat_timeout_threshold = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold | default "60" }} # How often times during the heartbeat_timeout_threshold we check the heartbeat. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate {{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate }}#{{ end }}heartbeat_rate = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate | default "2" }} # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value) # Deprecated group/name - [DEFAULT]/fake_rabbit # from .oslo_messaging_rabbit.oslo.messaging.fake_rabbit {{ if not .oslo_messaging_rabbit.oslo.messaging.fake_rabbit }}#{{ end }}fake_rabbit = {{ .oslo_messaging_rabbit.oslo.messaging.fake_rabbit | default "false" }} # Maximum number of channels to allow (integer value) # from .oslo_messaging_rabbit.oslo.messaging.channel_max {{ if not .oslo_messaging_rabbit.oslo.messaging.channel_max }}#{{ end }}channel_max = {{ .oslo_messaging_rabbit.oslo.messaging.channel_max | default "" }} # The maximum byte size for an AMQP frame (integer value) # from .oslo_messaging_rabbit.oslo.messaging.frame_max {{ if not .oslo_messaging_rabbit.oslo.messaging.frame_max }}#{{ end }}frame_max = {{ .oslo_messaging_rabbit.oslo.messaging.frame_max | default "" }} # How often to send heartbeats for consumer's connections (integer value) # from .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval {{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval }}#{{ end }}heartbeat_interval = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval | default "3" }} # Enable SSL (boolean value) # from .oslo_messaging_rabbit.oslo.messaging.ssl {{ if not .oslo_messaging_rabbit.oslo.messaging.ssl }}#{{ end }}ssl = {{ .oslo_messaging_rabbit.oslo.messaging.ssl | default "" }} # Arguments passed to ssl.wrap_socket (dict value) # from .oslo_messaging_rabbit.oslo.messaging.ssl_options {{ if not .oslo_messaging_rabbit.oslo.messaging.ssl_options }}#{{ end }}ssl_options = {{ .oslo_messaging_rabbit.oslo.messaging.ssl_options | default "" }} # Set socket timeout in seconds for connection's socket (floating point value) # from .oslo_messaging_rabbit.oslo.messaging.socket_timeout {{ if not .oslo_messaging_rabbit.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.socket_timeout | default "0.25" }} # Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point value) # from .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout {{ if not .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout }}#{{ end }}tcp_user_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout | default "0.25" }} # Set delay for reconnection to some host which has connection error (floating point value) # from .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay {{ if not .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay }}#{{ end }}host_connection_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay | default "0.25" }} # Connection factory implementation (string value) # Allowed values: new, single, read_write # from .oslo_messaging_rabbit.oslo.messaging.connection_factory {{ if not .oslo_messaging_rabbit.oslo.messaging.connection_factory }}#{{ end }}connection_factory = {{ .oslo_messaging_rabbit.oslo.messaging.connection_factory | default "single" }} # Maximum number of connections to keep queued. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.pool_max_size {{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_size }}#{{ end }}pool_max_size = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_size | default "30" }} # Maximum number of connections to create above `pool_max_size`. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow {{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow }}#{{ end }}pool_max_overflow = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow | default "0" }} # Default number of seconds to wait for a connections to available (integer value) # from .oslo_messaging_rabbit.oslo.messaging.pool_timeout {{ if not .oslo_messaging_rabbit.oslo.messaging.pool_timeout }}#{{ end }}pool_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.pool_timeout | default "30" }} # Lifetime of a connection (since creation) in seconds or None for no recycling. Expired connections are closed on # acquire. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.pool_recycle {{ if not .oslo_messaging_rabbit.oslo.messaging.pool_recycle }}#{{ end }}pool_recycle = {{ .oslo_messaging_rabbit.oslo.messaging.pool_recycle | default "600" }} # Threshold at which inactive (since release) connections are considered stale in seconds or None for no staleness. # Stale connections are closed on acquire. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.pool_stale {{ if not .oslo_messaging_rabbit.oslo.messaging.pool_stale }}#{{ end }}pool_stale = {{ .oslo_messaging_rabbit.oslo.messaging.pool_stale | default "60" }} # Persist notification messages. (boolean value) # from .oslo_messaging_rabbit.oslo.messaging.notification_persistence {{ if not .oslo_messaging_rabbit.oslo.messaging.notification_persistence }}#{{ end }}notification_persistence = {{ .oslo_messaging_rabbit.oslo.messaging.notification_persistence | default "false" }} # Exchange name for sending notifications (string value) # from .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange {{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange | default "${control_exchange}_notification" }} # Max number of not acknowledged message which RabbitMQ can send to notification listener. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count {{ if not .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count }}#{{ end }}notification_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count | default "100" }} # Reconnecting retry count in case of connectivity problem during sending notification, -1 means infinite retry. # (integer value) # from .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts {{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts }}#{{ end }}default_notification_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts | default "-1" }} # Reconnecting retry delay in case of connectivity problem during sending notification message (floating point value) # from .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay {{ if not .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay }}#{{ end }}notification_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay | default "0.25" }} # Time to live for rpc queues without consumers in seconds. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration {{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration }}#{{ end }}rpc_queue_expiration = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration | default "60" }} # Exchange name for sending RPC messages (string value) # from .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange {{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange | default "${control_exchange}_rpc" }} # Exchange name for receiving RPC replies (string value) # from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange {{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange }}#{{ end }}rpc_reply_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange | default "${control_exchange}_rpc_reply" }} # Max number of not acknowledged message which RabbitMQ can send to rpc listener. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count {{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count }}#{{ end }}rpc_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count | default "100" }} # Max number of not acknowledged message which RabbitMQ can send to rpc reply listener. (integer value) # from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count {{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count }}#{{ end }}rpc_reply_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count | default "100" }} # Reconnecting retry count in case of connectivity problem during sending reply. -1 means infinite retry during # rpc_timeout (integer value) # from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts {{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts }}#{{ end }}rpc_reply_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts | default "-1" }} # Reconnecting retry delay in case of connectivity problem during sending reply. (floating point value) # from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay {{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay }}#{{ end }}rpc_reply_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay | default "0.25" }} # Reconnecting retry count in case of connectivity problem during sending RPC message, -1 means infinite retry. If # actual retry attempts in not 0 the rpc request could be processed more then one time (integer value) # from .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts {{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts }}#{{ end }}default_rpc_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts | default "-1" }} # Reconnecting retry delay in case of connectivity problem during sending RPC message (floating point value) # from .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay {{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay }}#{{ end }}rpc_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay | default "0.25" }} [oslo_messaging_zmq] # # From oslo.messaging # # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or # resolve to this address. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address | default "*" }} # MatchMaker driver. (string value) # Allowed values: redis, dummy # Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker | default "redis" }} # Number of ZeroMQ contexts, defaults to 1. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_contexts # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts | default "1" }} # Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog | default "" }} # Directory for holding IPC sockets. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }} # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string # value) # Deprecated group/name - [DEFAULT]/rpc_zmq_host # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host | default "localhost" }} # Seconds to wait before a cast expires (TTL). The default value of -1 specifies an infinite linger period. The value # of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Only # supported by impl_zmq. (integer value) # Deprecated group/name - [DEFAULT]/rpc_cast_timeout # from .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout | default "-1" }} # The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer # value) # Deprecated group/name - [DEFAULT]/rpc_poll_timeout # from .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout | default "1" }} # Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value) # Deprecated group/name - [DEFAULT]/zmq_target_expire # from .oslo_messaging_zmq.oslo.messaging.zmq_target_expire {{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_expire | default "300" }} # Update period in seconds of a name service record about existing target. (integer value) # Deprecated group/name - [DEFAULT]/zmq_target_update # from .oslo_messaging_zmq.oslo.messaging.zmq_target_update {{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_update | default "180" }} # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value) # Deprecated group/name - [DEFAULT]/use_pub_sub # from .oslo_messaging_zmq.oslo.messaging.use_pub_sub {{ if not .oslo_messaging_zmq.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .oslo_messaging_zmq.oslo.messaging.use_pub_sub | default "true" }} # Use ROUTER remote proxy. (boolean value) # Deprecated group/name - [DEFAULT]/use_router_proxy # from .oslo_messaging_zmq.oslo.messaging.use_router_proxy {{ if not .oslo_messaging_zmq.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .oslo_messaging_zmq.oslo.messaging.use_router_proxy | default "true" }} # Minimal port number for random ports range. (port value) # Minimum value: 0 # Maximum value: 65535 # Deprecated group/name - [DEFAULT]/rpc_zmq_min_port # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port | default "49153" }} # Maximal port number for random ports range. (integer value) # Minimum value: 1 # Maximum value: 65536 # Deprecated group/name - [DEFAULT]/rpc_zmq_max_port # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port | default "65536" }} # Number of retries to find free port number before fail with ZMQBindError. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }} # Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value) # Allowed values: json, msgpack # Deprecated group/name - [DEFAULT]/rpc_zmq_serialization # from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization {{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization | default "json" }} # This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. # False means to keep queue and messages even if server is disconnected, when the server appears we send all # accumulated messages to it. (boolean value) # from .oslo_messaging_zmq.oslo.messaging.zmq_immediate {{ if not .oslo_messaging_zmq.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .oslo_messaging_zmq.oslo.messaging.zmq_immediate | default "false" }} [oslo_policy] # # From oslo.policy # # The JSON file that defines policies. (string value) # Deprecated group/name - [DEFAULT]/policy_file # from .oslo_policy.oslo.policy.policy_file {{ if not .oslo_policy.oslo.policy.policy_file }}#{{ end }}policy_file = {{ .oslo_policy.oslo.policy.policy_file | default "policy.json" }} # Default rule. Enforced when a requested rule is not found. (string value) # Deprecated group/name - [DEFAULT]/policy_default_rule # from .oslo_policy.oslo.policy.policy_default_rule {{ if not .oslo_policy.oslo.policy.policy_default_rule }}#{{ end }}policy_default_rule = {{ .oslo_policy.oslo.policy.policy_default_rule | default "default" }} # Directories where policy configuration files are stored. They can be relative to any directory in the search path # defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories # to be searched. Missing or empty directories are ignored. (multi valued) # Deprecated group/name - [DEFAULT]/policy_dirs # from .oslo_policy.oslo.policy.policy_dirs (multiopt) {{ if not .oslo_policy.oslo.policy.policy_dirs }}#policy_dirs = {{ .oslo_policy.oslo.policy.policy_dirs | default "policy.d" }}{{ else }}{{ range .oslo_policy.oslo.policy.policy_dirs }}policy_dirs = {{ . }}{{ end }}{{ end }} [revision] # # From senlin.config # # Senlin API revision. (string value) # from .revision.senlin.config.senlin_api_revision {{ if not .revision.senlin.config.senlin_api_revision }}#{{ end }}senlin_api_revision = {{ .revision.senlin.config.senlin_api_revision | default "1.0" }} # Senlin engine revision. (string value) # from .revision.senlin.config.senlin_engine_revision {{ if not .revision.senlin.config.senlin_engine_revision }}#{{ end }}senlin_engine_revision = {{ .revision.senlin.config.senlin_engine_revision | default "1.0" }} [senlin_api] # # From senlin.config # # Address to bind the server. Useful when selecting a particular network interface. (IP address value) # from .senlin_api.senlin.config.bind_host {{ if not .senlin_api.senlin.config.bind_host }}#{{ end }}bind_host = {{ .senlin_api.senlin.config.bind_host | default "0.0.0.0" }} # The port on which the server will listen. (port value) # Minimum value: 0 # Maximum value: 65535 # from .senlin_api.senlin.config.bind_port {{ if not .senlin_api.senlin.config.bind_port }}#{{ end }}bind_port = {{ .senlin_api.senlin.config.bind_port | default "8778" }} # Number of backlog requests to configure the socket with. (integer value) # from .senlin_api.senlin.config.backlog {{ if not .senlin_api.senlin.config.backlog }}#{{ end }}backlog = {{ .senlin_api.senlin.config.backlog | default "4096" }} # Location of the SSL certificate file to use for SSL mode. (string value) # from .senlin_api.senlin.config.cert_file {{ if not .senlin_api.senlin.config.cert_file }}#{{ end }}cert_file = {{ .senlin_api.senlin.config.cert_file | default "" }} # Location of the SSL key file to use for enabling SSL mode. (string value) # from .senlin_api.senlin.config.key_file {{ if not .senlin_api.senlin.config.key_file }}#{{ end }}key_file = {{ .senlin_api.senlin.config.key_file | default "" }} # Number of workers for Senlin service. (integer value) # from .senlin_api.senlin.config.workers {{ if not .senlin_api.senlin.config.workers }}#{{ end }}workers = {{ .senlin_api.senlin.config.workers | default "0" }} # Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens # (typically those generated by the Keystone v3 API with big service catalogs). (integer value) # from .senlin_api.senlin.config.max_header_line {{ if not .senlin_api.senlin.config.max_header_line }}#{{ end }}max_header_line = {{ .senlin_api.senlin.config.max_header_line | default "16384" }} # The value for the socket option TCP_KEEPIDLE. This is the time in seconds that the connection must be idle before # TCP starts sending keepalive probes. (integer value) # from .senlin_api.senlin.config.tcp_keepidle {{ if not .senlin_api.senlin.config.tcp_keepidle }}#{{ end }}tcp_keepidle = {{ .senlin_api.senlin.config.tcp_keepidle | default "600" }} # The API paste config file to use. (string value) # Deprecated group/name - [paste_deploy]/api_paste_config # from .senlin_api.senlin.config.api_paste_config {{ if not .senlin_api.senlin.config.api_paste_config }}#{{ end }}api_paste_config = {{ .senlin_api.senlin.config.api_paste_config | default "api-paste.ini" }} # If false, closes the client socket explicitly. (boolean value) # Deprecated group/name - [eventlet_opts]/wsgi_keep_alive # from .senlin_api.senlin.config.wsgi_keep_alive {{ if not .senlin_api.senlin.config.wsgi_keep_alive }}#{{ end }}wsgi_keep_alive = {{ .senlin_api.senlin.config.wsgi_keep_alive | default "true" }} # Timeout for client connections' socket operations. If an incoming connection is idle for this number of seconds it # will be closed. A value of '0' indicates waiting forever. (integer value) # Deprecated group/name - [eventlet_opts]/client_socket_timeout # from .senlin_api.senlin.config.client_socket_timeout {{ if not .senlin_api.senlin.config.client_socket_timeout }}#{{ end }}client_socket_timeout = {{ .senlin_api.senlin.config.client_socket_timeout | default "900" }} # Maximum raw byte size of JSON request body. Should be larger than max_template_size. (integer value) # Deprecated group/name - [DEFAULT]/max_json_body_size # from .senlin_api.senlin.config.max_json_body_size {{ if not .senlin_api.senlin.config.max_json_body_size }}#{{ end }}max_json_body_size = {{ .senlin_api.senlin.config.max_json_body_size | default "1048576" }} [ssl] # # From oslo.service.sslutils # # CA certificate file to use to verify connecting clients. (string value) # Deprecated group/name - [DEFAULT]/ssl_ca_file # from .ssl.oslo.service.sslutils.ca_file {{ if not .ssl.oslo.service.sslutils.ca_file }}#{{ end }}ca_file = {{ .ssl.oslo.service.sslutils.ca_file | default "" }} # Certificate file to use when starting the server securely. (string value) # Deprecated group/name - [DEFAULT]/ssl_cert_file # from .ssl.oslo.service.sslutils.cert_file {{ if not .ssl.oslo.service.sslutils.cert_file }}#{{ end }}cert_file = {{ .ssl.oslo.service.sslutils.cert_file | default "" }} # Private key file to use when starting the server securely. (string value) # Deprecated group/name - [DEFAULT]/ssl_key_file # from .ssl.oslo.service.sslutils.key_file {{ if not .ssl.oslo.service.sslutils.key_file }}#{{ end }}key_file = {{ .ssl.oslo.service.sslutils.key_file | default "" }} # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 # may be available on some distributions. (string value) # from .ssl.oslo.service.sslutils.version {{ if not .ssl.oslo.service.sslutils.version }}#{{ end }}version = {{ .ssl.oslo.service.sslutils.version | default "" }} # Sets the list of available ciphers. value should be a string in the OpenSSL cipher list format. (string value) # from .ssl.oslo.service.sslutils.ciphers {{ if not .ssl.oslo.service.sslutils.ciphers }}#{{ end }}ciphers = {{ .ssl.oslo.service.sslutils.ciphers | default "" }} [webhook] # # From senlin.config # # Address for invoking webhooks. It is useful for cases where proxies are used for triggering webhooks. Default to the # hostname of the API node. (string value) # from .webhook.senlin.config.host {{ if not .webhook.senlin.config.host }}#{{ end }}host = {{ .webhook.senlin.config.host | default "" }} # The port on which a webhook will be invoked. Useful when service is running behind a proxy. (port value) # Minimum value: 0 # Maximum value: 65535 # from .webhook.senlin.config.port {{ if not .webhook.senlin.config.port }}#{{ end }}port = {{ .webhook.senlin.config.port | default "8778" }} [zaqar] # # From senlin.config # # Authentication type to load (string value) # Deprecated group/name - [zaqar]/auth_plugin # from .zaqar.senlin.config.auth_type {{ if not .zaqar.senlin.config.auth_type }}#{{ end }}auth_type = {{ .zaqar.senlin.config.auth_type | default "" }} # Config Section from which to load plugin specific options (string value) # from .zaqar.senlin.config.auth_section {{ if not .zaqar.senlin.config.auth_section }}#{{ end }}auth_section = {{ .zaqar.senlin.config.auth_section | default "" }} # Authentication URL (string value) # from .zaqar.senlin.config.auth_url {{ if not .zaqar.senlin.config.auth_url }}#{{ end }}auth_url = {{ .zaqar.senlin.config.auth_url | default "" }} # Domain ID to scope to (string value) # from .zaqar.senlin.config.domain_id {{ if not .zaqar.senlin.config.domain_id }}#{{ end }}domain_id = {{ .zaqar.senlin.config.domain_id | default "" }} # Domain name to scope to (string value) # from .zaqar.senlin.config.domain_name {{ if not .zaqar.senlin.config.domain_name }}#{{ end }}domain_name = {{ .zaqar.senlin.config.domain_name | default "" }} # Project ID to scope to (string value) # Deprecated group/name - [zaqar]/tenant-id # from .zaqar.senlin.config.project_id {{ if not .zaqar.senlin.config.project_id }}#{{ end }}project_id = {{ .zaqar.senlin.config.project_id | default "" }} # Project name to scope to (string value) # Deprecated group/name - [zaqar]/tenant-name # from .zaqar.senlin.config.project_name {{ if not .zaqar.senlin.config.project_name }}#{{ end }}project_name = {{ .zaqar.senlin.config.project_name | default "" }} # Domain ID containing project (string value) # from .zaqar.senlin.config.project_domain_id {{ if not .zaqar.senlin.config.project_domain_id }}#{{ end }}project_domain_id = {{ .zaqar.senlin.config.project_domain_id | default "" }} # Domain name containing project (string value) # from .zaqar.senlin.config.project_domain_name {{ if not .zaqar.senlin.config.project_domain_name }}#{{ end }}project_domain_name = {{ .zaqar.senlin.config.project_domain_name | default "" }} # Trust ID (string value) # from .zaqar.senlin.config.trust_id {{ if not .zaqar.senlin.config.trust_id }}#{{ end }}trust_id = {{ .zaqar.senlin.config.trust_id | default "" }} # Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and # ignored in v2 authentication. (string value) # from .zaqar.senlin.config.default_domain_id {{ if not .zaqar.senlin.config.default_domain_id }}#{{ end }}default_domain_id = {{ .zaqar.senlin.config.default_domain_id | default "" }} # Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 # and ignored in v2 authentication. (string value) # from .zaqar.senlin.config.default_domain_name {{ if not .zaqar.senlin.config.default_domain_name }}#{{ end }}default_domain_name = {{ .zaqar.senlin.config.default_domain_name | default "" }} # User id (string value) # from .zaqar.senlin.config.user_id {{ if not .zaqar.senlin.config.user_id }}#{{ end }}user_id = {{ .zaqar.senlin.config.user_id | default "" }} # Username (string value) # Deprecated group/name - [zaqar]/user-name # from .zaqar.senlin.config.username {{ if not .zaqar.senlin.config.username }}#{{ end }}username = {{ .zaqar.senlin.config.username | default "" }} # User's domain id (string value) # from .zaqar.senlin.config.user_domain_id {{ if not .zaqar.senlin.config.user_domain_id }}#{{ end }}user_domain_id = {{ .zaqar.senlin.config.user_domain_id | default "" }} # User's domain name (string value) # from .zaqar.senlin.config.user_domain_name {{ if not .zaqar.senlin.config.user_domain_name }}#{{ end }}user_domain_name = {{ .zaqar.senlin.config.user_domain_name | default "" }} # User's password (string value) # from .zaqar.senlin.config.password {{ if not .zaqar.senlin.config.password }}#{{ end }}password = {{ .zaqar.senlin.config.password | default "" }} {{- end -}}