# Copyright 2017 The Openstack-Helm Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

{{ include "neutron.conf.l3_agent_values_skeleton" .Values.conf.l3_agent | trunc 0 }}
{{ include "neutron.conf.l3_agent" .Values.conf.l3_agent }}


{{- define "neutron.conf.l3_agent_values_skeleton" -}}

{{- if not .default -}}{{- set . "default" dict -}}{{- end -}}
{{- if not .default.neutron -}}{{- set .default "neutron" dict -}}{{- end -}}
{{- if not .default.neutron.base -}}{{- set .default.neutron "base" dict -}}{{- end -}}
{{- if not .default.neutron.base.agent -}}{{- set .default.neutron.base "agent" dict -}}{{- end -}}
{{- if not .default.neutron.l3 -}}{{- set .default.neutron "l3" dict -}}{{- end -}}
{{- if not .default.neutron.l3.agent -}}{{- set .default.neutron.l3 "agent" dict -}}{{- end -}}
{{- if not .default.oslo -}}{{- set .default "oslo" dict -}}{{- end -}}
{{- if not .default.oslo.log -}}{{- set .default.oslo "log" dict -}}{{- end -}}
{{- if not .agent -}}{{- set . "agent" dict -}}{{- end -}}
{{- if not .agent.neutron -}}{{- set .agent "neutron" dict -}}{{- end -}}
{{- if not .agent.neutron.base -}}{{- set .agent.neutron "base" dict -}}{{- end -}}
{{- if not .agent.neutron.base.agent -}}{{- set .agent.neutron.base "agent" dict -}}{{- end -}}

{{- end -}}


{{- define "neutron.conf.l3_agent" -}}

[DEFAULT]

#
# From neutron.base.agent
#

# Name of Open vSwitch bridge to use (string value)
# from .default.neutron.base.agent.ovs_integration_bridge
{{ if not .default.neutron.base.agent.ovs_integration_bridge }}#{{ end }}ovs_integration_bridge = {{ .default.neutron.base.agent.ovs_integration_bridge | default "br-int" }}

# Uses veth for an OVS interface or not. Support kernels with limited namespace
# support (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. (boolean
# value)
# from .default.neutron.base.agent.ovs_use_veth
{{ if not .default.neutron.base.agent.ovs_use_veth }}#{{ end }}ovs_use_veth = {{ .default.neutron.base.agent.ovs_use_veth | default "false" }}

# The driver used to manage the virtual interface. (string value)
# from .default.neutron.base.agent.interface_driver
{{ if not .default.neutron.base.agent.interface_driver }}#{{ end }}interface_driver = {{ .default.neutron.base.agent.interface_driver | default "<None>" }}

# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs
# commands will fail with ALARMCLOCK error. (integer value)
# from .default.neutron.base.agent.ovs_vsctl_timeout
{{ if not .default.neutron.base.agent.ovs_vsctl_timeout }}#{{ end }}ovs_vsctl_timeout = {{ .default.neutron.base.agent.ovs_vsctl_timeout | default "10" }}

#
# From neutron.l3.agent
#

# The working mode for the agent. Allowed modes are: 'legacy' - this preserves
# the existing behavior where the L3 agent is deployed on a centralized
# networking node to provide L3 services like DNAT, and SNAT. Use this mode if
# you do not want to adopt DVR. 'dvr' - this mode enables DVR functionality and
# must be used for an L3 agent that runs on a compute host. 'dvr_snat' - this
# enables centralized SNAT support in conjunction with DVR.  This mode must be
# used for an L3 agent running on a centralized node (or in single-host
# deployments, e.g. devstack) (string value)
# Allowed values: dvr, dvr_snat, legacy
# from .default.neutron.l3.agent.agent_mode
{{ if not .default.neutron.l3.agent.agent_mode }}#{{ end }}agent_mode = {{ .default.neutron.l3.agent.agent_mode | default "legacy" }}

# TCP Port used by Neutron metadata namespace proxy. (port value)
# Minimum value: 0
# Maximum value: 65535
# from .default.neutron.l3.agent.metadata_port
{{ if not .default.neutron.l3.agent.metadata_port }}#{{ end }}metadata_port = {{ .default.neutron.l3.agent.metadata_port | default "9697" }}

# Send this many gratuitous ARPs for HA setup, if less than or equal to 0, the
# feature is disabled (integer value)
# from .default.neutron.l3.agent.send_arp_for_ha
{{ if not .default.neutron.l3.agent.send_arp_for_ha }}#{{ end }}send_arp_for_ha = {{ .default.neutron.l3.agent.send_arp_for_ha | default "3" }}

# Indicates that this L3 agent should also handle routers that do not have an
# external network gateway configured. This option should be True only for a
# single agent in a Neutron deployment, and may be False for all agents if all
# routers must have an external network gateway. (boolean value)
# from .default.neutron.l3.agent.handle_internal_only_routers
{{ if not .default.neutron.l3.agent.handle_internal_only_routers }}#{{ end }}handle_internal_only_routers = {{ .default.neutron.l3.agent.handle_internal_only_routers | default "true" }}

# When external_network_bridge is set, each L3 agent can be associated with no
# more than one external network. This value should be set to the UUID of that
# external network. To allow L3 agent support multiple external networks, both
# the external_network_bridge and gateway_external_network_id must be left
# empty. (string value)
# from .default.neutron.l3.agent.gateway_external_network_id
{{ if not .default.neutron.l3.agent.gateway_external_network_id }}#{{ end }}gateway_external_network_id = {{ .default.neutron.l3.agent.gateway_external_network_id | default "" }}

# With IPv6, the network used for the external gateway does not need to have an
# associated subnet, since the automatically assigned link-local address (LLA)
# can be used. However, an IPv6 gateway address is needed for use as the next-
# hop for the default route. If no IPv6 gateway address is configured here,
# (and only then) the neutron router will be configured to get its default
# route from router advertisements (RAs) from the upstream router; in which
# case the upstream router must also be configured to send these RAs. The
# ipv6_gateway, when configured, should be the LLA of the interface on the
# upstream router. If a next-hop using a global unique address (GUA) is
# desired, it needs to be done via a subnet allocated to the network and not
# through this parameter.  (string value)
# from .default.neutron.l3.agent.ipv6_gateway
{{ if not .default.neutron.l3.agent.ipv6_gateway }}#{{ end }}ipv6_gateway = {{ .default.neutron.l3.agent.ipv6_gateway | default "" }}

# Driver used for ipv6 prefix delegation. This needs to be an entry point
# defined in the neutron.agent.linux.pd_drivers namespace. See setup.cfg for
# entry points included with the neutron source. (string value)
# from .default.neutron.l3.agent.prefix_delegation_driver
{{ if not .default.neutron.l3.agent.prefix_delegation_driver }}#{{ end }}prefix_delegation_driver = {{ .default.neutron.l3.agent.prefix_delegation_driver | default "dibbler" }}

# Allow running metadata proxy. (boolean value)
# from .default.neutron.l3.agent.enable_metadata_proxy
{{ if not .default.neutron.l3.agent.enable_metadata_proxy }}#{{ end }}enable_metadata_proxy = {{ .default.neutron.l3.agent.enable_metadata_proxy | default "true" }}

# Iptables mangle mark used to mark metadata valid requests. This mark will be
# masked with 0xffff so that only the lower 16 bits will be used. (string
# value)
# from .default.neutron.l3.agent.metadata_access_mark
{{ if not .default.neutron.l3.agent.metadata_access_mark }}#{{ end }}metadata_access_mark = {{ .default.neutron.l3.agent.metadata_access_mark | default "0x1" }}

# Iptables mangle mark used to mark ingress from external network. This mark
# will be masked with 0xffff so that only the lower 16 bits will be used.
# (string value)
# from .default.neutron.l3.agent.external_ingress_mark
{{ if not .default.neutron.l3.agent.external_ingress_mark }}#{{ end }}external_ingress_mark = {{ .default.neutron.l3.agent.external_ingress_mark | default "0x2" }}

# DEPRECATED: Name of bridge used for external network traffic. When this
# parameter is set, the L3 agent will plug an interface directly into an
# external bridge which will not allow any wiring by the L2 agent. Using this
# will result in incorrect port statuses. This option is deprecated and will be
# removed in Ocata. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# from .default.neutron.l3.agent.external_network_bridge
{{ if not .default.neutron.l3.agent.external_network_bridge }}#{{ end }}external_network_bridge = {{ .default.neutron.l3.agent.external_network_bridge | default "" }}

# Seconds between running periodic tasks. (integer value)
# from .default.neutron.l3.agent.periodic_interval
{{ if not .default.neutron.l3.agent.periodic_interval }}#{{ end }}periodic_interval = {{ .default.neutron.l3.agent.periodic_interval | default "40" }}

# Number of separate API worker processes for service. If not specified, the
# default is equal to the number of CPUs available for best performance.
# (integer value)
# from .default.neutron.l3.agent.api_workers
{{ if not .default.neutron.l3.agent.api_workers }}#{{ end }}api_workers = {{ .default.neutron.l3.agent.api_workers | default "<None>" }}

# Number of RPC worker processes for service. (integer value)
# from .default.neutron.l3.agent.rpc_workers
{{ if not .default.neutron.l3.agent.rpc_workers }}#{{ end }}rpc_workers = {{ .default.neutron.l3.agent.rpc_workers | default "1" }}

# Number of RPC worker processes dedicated to state reports queue. (integer
# value)
# from .default.neutron.l3.agent.rpc_state_report_workers
{{ if not .default.neutron.l3.agent.rpc_state_report_workers }}#{{ end }}rpc_state_report_workers = {{ .default.neutron.l3.agent.rpc_state_report_workers | default "1" }}

# Range of seconds to randomly delay when starting the periodic task scheduler
# to reduce stampeding. (Disable by setting to 0) (integer value)
# from .default.neutron.l3.agent.periodic_fuzzy_delay
{{ if not .default.neutron.l3.agent.periodic_fuzzy_delay }}#{{ end }}periodic_fuzzy_delay = {{ .default.neutron.l3.agent.periodic_fuzzy_delay | default "5" }}

# Location to store keepalived/conntrackd config files (string value)
# from .default.neutron.l3.agent.ha_confs_path
{{ if not .default.neutron.l3.agent.ha_confs_path }}#{{ end }}ha_confs_path = {{ .default.neutron.l3.agent.ha_confs_path | default "$state_path/ha_confs" }}

# VRRP authentication type (string value)
# Allowed values: AH, PASS
# from .default.neutron.l3.agent.ha_vrrp_auth_type
{{ if not .default.neutron.l3.agent.ha_vrrp_auth_type }}#{{ end }}ha_vrrp_auth_type = {{ .default.neutron.l3.agent.ha_vrrp_auth_type | default "PASS" }}

# VRRP authentication password (string value)
# from .default.neutron.l3.agent.ha_vrrp_auth_password
{{ if not .default.neutron.l3.agent.ha_vrrp_auth_password }}#{{ end }}ha_vrrp_auth_password = {{ .default.neutron.l3.agent.ha_vrrp_auth_password | default "<None>" }}

# The advertisement interval in seconds (integer value)
# from .default.neutron.l3.agent.ha_vrrp_advert_int
{{ if not .default.neutron.l3.agent.ha_vrrp_advert_int }}#{{ end }}ha_vrrp_advert_int = {{ .default.neutron.l3.agent.ha_vrrp_advert_int | default "2" }}

# Number of concurrent threads for keepalived server connection requests.More
# threads create a higher CPU load on the agent node. (integer value)
# Minimum value: 1
# from .default.neutron.l3.agent.ha_keepalived_state_change_server_threads
{{ if not .default.neutron.l3.agent.ha_keepalived_state_change_server_threads }}#{{ end }}ha_keepalived_state_change_server_threads = {{ .default.neutron.l3.agent.ha_keepalived_state_change_server_threads | default "4" }}

# Service to handle DHCPv6 Prefix delegation. (string value)
# from .default.neutron.l3.agent.pd_dhcp_driver
{{ if not .default.neutron.l3.agent.pd_dhcp_driver }}#{{ end }}pd_dhcp_driver = {{ .default.neutron.l3.agent.pd_dhcp_driver | default "dibbler" }}

# Location to store IPv6 RA config files (string value)
# from .default.neutron.l3.agent.ra_confs
{{ if not .default.neutron.l3.agent.ra_confs }}#{{ end }}ra_confs = {{ .default.neutron.l3.agent.ra_confs | default "$state_path/ra" }}

# MinRtrAdvInterval setting for radvd.conf (integer value)
# from .default.neutron.l3.agent.min_rtr_adv_interval
{{ if not .default.neutron.l3.agent.min_rtr_adv_interval }}#{{ end }}min_rtr_adv_interval = {{ .default.neutron.l3.agent.min_rtr_adv_interval | default "30" }}

# MaxRtrAdvInterval setting for radvd.conf (integer value)
# from .default.neutron.l3.agent.max_rtr_adv_interval
{{ if not .default.neutron.l3.agent.max_rtr_adv_interval }}#{{ end }}max_rtr_adv_interval = {{ .default.neutron.l3.agent.max_rtr_adv_interval | default "100" }}

#
# From oslo.log
#

# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
# Note: This option can be changed without restarting.
# from .default.oslo.log.debug
{{ if not .default.oslo.log.debug }}#{{ end }}debug = {{ .default.oslo.log.debug | default "false" }}

# DEPRECATED: If set to false, the logging level will be set to WARNING instead
# of the default INFO level. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# from .default.oslo.log.verbose
{{ if not .default.oslo.log.verbose }}#{{ end }}verbose = {{ .default.oslo.log.verbose | default "true" }}

# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, logging_context_format_string). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
# from .default.oslo.log.log_config_append
{{ if not .default.oslo.log.log_config_append }}#{{ end }}log_config_append = {{ .default.oslo.log.log_config_append | default "<None>" }}

# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
# from .default.oslo.log.log_date_format
{{ if not .default.oslo.log.log_date_format }}#{{ end }}log_date_format = {{ .default.oslo.log.log_date_format | default "%Y-%m-%d %H:%M:%S" }}

# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
# from .default.oslo.log.log_file
{{ if not .default.oslo.log.log_file }}#{{ end }}log_file = {{ .default.oslo.log.log_file | default "<None>" }}

# (Optional) The base directory used for relative log_file  paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
# from .default.oslo.log.log_dir
{{ if not .default.oslo.log.log_dir }}#{{ end }}log_dir = {{ .default.oslo.log.log_dir | default "<None>" }}

# Uses logging handler designed to watch file system. When log file is moved or
# removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and
# Linux platform is used. This option is ignored if log_config_append is set.
# (boolean value)
# from .default.oslo.log.watch_log_file
{{ if not .default.oslo.log.watch_log_file }}#{{ end }}watch_log_file = {{ .default.oslo.log.watch_log_file | default "false" }}

# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append
# is set. (boolean value)
# from .default.oslo.log.use_syslog
{{ if not .default.oslo.log.use_syslog }}#{{ end }}use_syslog = {{ .default.oslo.log.use_syslog | default "false" }}

# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
# from .default.oslo.log.syslog_log_facility
{{ if not .default.oslo.log.syslog_log_facility }}#{{ end }}syslog_log_facility = {{ .default.oslo.log.syslog_log_facility | default "LOG_USER" }}

# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
# from .default.oslo.log.use_stderr
{{ if not .default.oslo.log.use_stderr }}#{{ end }}use_stderr = {{ .default.oslo.log.use_stderr | default "true" }}

# Format string to use for log messages with context. (string value)
# from .default.oslo.log.logging_context_format_string
{{ if not .default.oslo.log.logging_context_format_string }}#{{ end }}logging_context_format_string = {{ .default.oslo.log.logging_context_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s" }}

# Format string to use for log messages when context is undefined. (string
# value)
# from .default.oslo.log.logging_default_format_string
{{ if not .default.oslo.log.logging_default_format_string }}#{{ end }}logging_default_format_string = {{ .default.oslo.log.logging_default_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s" }}

# Additional data to append to log message when logging level for the message
# is DEBUG. (string value)
# from .default.oslo.log.logging_debug_format_suffix
{{ if not .default.oslo.log.logging_debug_format_suffix }}#{{ end }}logging_debug_format_suffix = {{ .default.oslo.log.logging_debug_format_suffix | default "%(funcName)s %(pathname)s:%(lineno)d" }}

# Prefix each line of exception output with this format. (string value)
# from .default.oslo.log.logging_exception_prefix
{{ if not .default.oslo.log.logging_exception_prefix }}#{{ end }}logging_exception_prefix = {{ .default.oslo.log.logging_exception_prefix | default "%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s" }}

# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. (string value)
# from .default.oslo.log.logging_user_identity_format
{{ if not .default.oslo.log.logging_user_identity_format }}#{{ end }}logging_user_identity_format = {{ .default.oslo.log.logging_user_identity_format | default "%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s" }}

# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
# from .default.oslo.log.default_log_levels
{{ if not .default.oslo.log.default_log_levels }}#{{ end }}default_log_levels = {{ .default.oslo.log.default_log_levels | default "amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO" }}

# Enables or disables publication of error events. (boolean value)
# from .default.oslo.log.publish_errors
{{ if not .default.oslo.log.publish_errors }}#{{ end }}publish_errors = {{ .default.oslo.log.publish_errors | default "false" }}

# The format for an instance that is passed with the log message. (string
# value)
# from .default.oslo.log.instance_format
{{ if not .default.oslo.log.instance_format }}#{{ end }}instance_format = {{ .default.oslo.log.instance_format | default "\"[instance: %(uuid)s] \"" }}

# The format for an instance UUID that is passed with the log message. (string
# value)
# from .default.oslo.log.instance_uuid_format
{{ if not .default.oslo.log.instance_uuid_format }}#{{ end }}instance_uuid_format = {{ .default.oslo.log.instance_uuid_format | default "\"[instance: %(uuid)s] \"" }}

# Enables or disables fatal status of deprecations. (boolean value)
# from .default.oslo.log.fatal_deprecations
{{ if not .default.oslo.log.fatal_deprecations }}#{{ end }}fatal_deprecations = {{ .default.oslo.log.fatal_deprecations | default "false" }}


[AGENT]

#
# From neutron.base.agent
#

# Seconds between nodes reporting state to server; should be less than
# agent_down_time, best if it is half or less than agent_down_time. (floating
# point value)
# from .agent.neutron.base.agent.report_interval
{{ if not .agent.neutron.base.agent.report_interval }}#{{ end }}report_interval = {{ .agent.neutron.base.agent.report_interval | default "30" }}

# Log agent heartbeats (boolean value)
# from .agent.neutron.base.agent.log_agent_heartbeats
{{ if not .agent.neutron.base.agent.log_agent_heartbeats }}#{{ end }}log_agent_heartbeats = {{ .agent.neutron.base.agent.log_agent_heartbeats | default "false" }}

# Availability zone of this node (string value)
# from .agent.neutron.base.agent.availability_zone
{{ if not .agent.neutron.base.agent.availability_zone }}#{{ end }}availability_zone = {{ .agent.neutron.base.agent.availability_zone | default "nova" }}

{{- end -}}