openstack-helm/senlin/templates/etc/_senlin.conf.tpl
Pete Birley b69e36e706 Senlin
This PS adds a Senlin Chart

Change-Id: Ibc831098a36861141a30bf2c9c03877ba32c6626
2017-05-02 04:34:20 -05:00

1650 lines
108 KiB
Smarty

# Copyright 2017 The Openstack-Helm Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
{{ include "senlin.conf.senlin_values_skeleton" .Values.conf.senlin | trunc 0 }}
{{ include "senlin.conf.senlin" .Values.conf.senlin }}
{{- define "senlin.conf.senlin_values_skeleton" -}}
{{- if not .default -}}{{- set . "default" dict -}}{{- end -}}
{{- if not .default.oslo -}}{{- set .default "oslo" dict -}}{{- end -}}
{{- if not .default.oslo.log -}}{{- set .default.oslo "log" dict -}}{{- end -}}
{{- if not .default.oslo.messaging -}}{{- set .default.oslo "messaging" dict -}}{{- end -}}
{{- if not .default.oslo.service -}}{{- set .default.oslo "service" dict -}}{{- end -}}
{{- if not .default.oslo.service.periodic_task -}}{{- set .default.oslo.service "periodic_task" dict -}}{{- end -}}
{{- if not .default.oslo.service.service -}}{{- set .default.oslo.service "service" dict -}}{{- end -}}
{{- if not .default.senlin -}}{{- set .default "senlin" dict -}}{{- end -}}
{{- if not .default.senlin.config -}}{{- set .default.senlin "config" dict -}}{{- end -}}
{{- if not .authentication -}}{{- set . "authentication" dict -}}{{- end -}}
{{- if not .authentication.senlin -}}{{- set .authentication "senlin" dict -}}{{- end -}}
{{- if not .authentication.senlin.config -}}{{- set .authentication.senlin "config" dict -}}{{- end -}}
{{- if not .database -}}{{- set . "database" dict -}}{{- end -}}
{{- if not .database.oslo -}}{{- set .database "oslo" dict -}}{{- end -}}
{{- if not .database.oslo.db -}}{{- set .database.oslo "db" dict -}}{{- end -}}
{{- if not .keystone_authtoken -}}{{- set . "keystone_authtoken" dict -}}{{- end -}}
{{- if not .keystone_authtoken.keystonemiddleware -}}{{- set .keystone_authtoken "keystonemiddleware" dict -}}{{- end -}}
{{- if not .keystone_authtoken.keystonemiddleware.auth_token -}}{{- set .keystone_authtoken.keystonemiddleware "auth_token" dict -}}{{- end -}}
{{- if not .matchmaker_redis -}}{{- set . "matchmaker_redis" dict -}}{{- end -}}
{{- if not .matchmaker_redis.oslo -}}{{- set .matchmaker_redis "oslo" dict -}}{{- end -}}
{{- if not .matchmaker_redis.oslo.messaging -}}{{- set .matchmaker_redis.oslo "messaging" dict -}}{{- end -}}
{{- if not .oslo_messaging_amqp -}}{{- set . "oslo_messaging_amqp" dict -}}{{- end -}}
{{- if not .oslo_messaging_amqp.oslo -}}{{- set .oslo_messaging_amqp "oslo" dict -}}{{- end -}}
{{- if not .oslo_messaging_amqp.oslo.messaging -}}{{- set .oslo_messaging_amqp.oslo "messaging" dict -}}{{- end -}}
{{- if not .oslo_messaging_notifications -}}{{- set . "oslo_messaging_notifications" dict -}}{{- end -}}
{{- if not .oslo_messaging_notifications.oslo -}}{{- set .oslo_messaging_notifications "oslo" dict -}}{{- end -}}
{{- if not .oslo_messaging_notifications.oslo.messaging -}}{{- set .oslo_messaging_notifications.oslo "messaging" dict -}}{{- end -}}
{{- if not .oslo_messaging_rabbit -}}{{- set . "oslo_messaging_rabbit" dict -}}{{- end -}}
{{- if not .oslo_messaging_rabbit.oslo -}}{{- set .oslo_messaging_rabbit "oslo" dict -}}{{- end -}}
{{- if not .oslo_messaging_rabbit.oslo.messaging -}}{{- set .oslo_messaging_rabbit.oslo "messaging" dict -}}{{- end -}}
{{- if not .oslo_messaging_zmq -}}{{- set . "oslo_messaging_zmq" dict -}}{{- end -}}
{{- if not .oslo_messaging_zmq.oslo -}}{{- set .oslo_messaging_zmq "oslo" dict -}}{{- end -}}
{{- if not .oslo_messaging_zmq.oslo.messaging -}}{{- set .oslo_messaging_zmq.oslo "messaging" dict -}}{{- end -}}
{{- if not .oslo_policy -}}{{- set . "oslo_policy" dict -}}{{- end -}}
{{- if not .oslo_policy.oslo -}}{{- set .oslo_policy "oslo" dict -}}{{- end -}}
{{- if not .oslo_policy.oslo.policy -}}{{- set .oslo_policy.oslo "policy" dict -}}{{- end -}}
{{- if not .revision -}}{{- set . "revision" dict -}}{{- end -}}
{{- if not .revision.senlin -}}{{- set .revision "senlin" dict -}}{{- end -}}
{{- if not .revision.senlin.config -}}{{- set .revision.senlin "config" dict -}}{{- end -}}
{{- if not .senlin_api -}}{{- set . "senlin_api" dict -}}{{- end -}}
{{- if not .senlin_api.senlin -}}{{- set .senlin_api "senlin" dict -}}{{- end -}}
{{- if not .senlin_api.senlin.config -}}{{- set .senlin_api.senlin "config" dict -}}{{- end -}}
{{- if not .ssl -}}{{- set . "ssl" dict -}}{{- end -}}
{{- if not .ssl.oslo -}}{{- set .ssl "oslo" dict -}}{{- end -}}
{{- if not .ssl.oslo.service -}}{{- set .ssl.oslo "service" dict -}}{{- end -}}
{{- if not .ssl.oslo.service.sslutils -}}{{- set .ssl.oslo.service "sslutils" dict -}}{{- end -}}
{{- if not .webhook -}}{{- set . "webhook" dict -}}{{- end -}}
{{- if not .webhook.senlin -}}{{- set .webhook "senlin" dict -}}{{- end -}}
{{- if not .webhook.senlin.config -}}{{- set .webhook.senlin "config" dict -}}{{- end -}}
{{- if not .zaqar -}}{{- set . "zaqar" dict -}}{{- end -}}
{{- if not .zaqar.senlin -}}{{- set .zaqar "senlin" dict -}}{{- end -}}
{{- if not .zaqar.senlin.config -}}{{- set .zaqar.senlin "config" dict -}}{{- end -}}
{{- end -}}
{{- define "senlin.conf.senlin" -}}
[DEFAULT]
#
# From oslo.log
#
# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
# Note: This option can be changed without restarting.
# from .default.oslo.log.debug
{{ if not .default.oslo.log.debug }}#{{ end }}debug = {{ .default.oslo.log.debug | default "false" }}
# DEPRECATED: If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# from .default.oslo.log.verbose
{{ if not .default.oslo.log.verbose }}#{{ end }}verbose = {{ .default.oslo.log.verbose | default "true" }}
# The name of a logging configuration file. This file is appended to any existing logging configuration files. For
# details about logging configuration files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the configuration file and other logging
# configuration options are ignored (for example, logging_context_format_string). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
# from .default.oslo.log.log_config_append
{{ if not .default.oslo.log.log_config_append }}#{{ end }}log_config_append = {{ .default.oslo.log.log_config_append | default "<None>" }}
# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if
# log_config_append is set. (string value)
# from .default.oslo.log.log_date_format
{{ if not .default.oslo.log.log_date_format }}#{{ end }}log_date_format = {{ .default.oslo.log.log_date_format | default "%Y-%m-%d %H:%M:%S" }}
# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by
# use_stderr. This option is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
# from .default.oslo.log.log_file
{{ if not .default.oslo.log.log_file }}#{{ end }}log_file = {{ .default.oslo.log.log_file | default "<None>" }}
# (Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.
# (string value)
# Deprecated group/name - [DEFAULT]/logdir
# from .default.oslo.log.log_dir
{{ if not .default.oslo.log.log_dir }}#{{ end }}log_dir = {{ .default.oslo.log.log_dir | default "<None>" }}
# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new
# log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform
# is used. This option is ignored if log_config_append is set. (boolean value)
# from .default.oslo.log.watch_log_file
{{ if not .default.oslo.log.watch_log_file }}#{{ end }}watch_log_file = {{ .default.oslo.log.watch_log_file | default "false" }}
# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option
# is ignored if log_config_append is set. (boolean value)
# from .default.oslo.log.use_syslog
{{ if not .default.oslo.log.use_syslog }}#{{ end }}use_syslog = {{ .default.oslo.log.use_syslog | default "false" }}
# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
# from .default.oslo.log.syslog_log_facility
{{ if not .default.oslo.log.syslog_log_facility }}#{{ end }}syslog_log_facility = {{ .default.oslo.log.syslog_log_facility | default "LOG_USER" }}
# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
# from .default.oslo.log.use_stderr
{{ if not .default.oslo.log.use_stderr }}#{{ end }}use_stderr = {{ .default.oslo.log.use_stderr | default "true" }}
# Format string to use for log messages with context. (string value)
# from .default.oslo.log.logging_context_format_string
{{ if not .default.oslo.log.logging_context_format_string }}#{{ end }}logging_context_format_string = {{ .default.oslo.log.logging_context_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s" }}
# Format string to use for log messages when context is undefined. (string value)
# from .default.oslo.log.logging_default_format_string
{{ if not .default.oslo.log.logging_default_format_string }}#{{ end }}logging_default_format_string = {{ .default.oslo.log.logging_default_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s" }}
# Additional data to append to log message when logging level for the message is DEBUG. (string value)
# from .default.oslo.log.logging_debug_format_suffix
{{ if not .default.oslo.log.logging_debug_format_suffix }}#{{ end }}logging_debug_format_suffix = {{ .default.oslo.log.logging_debug_format_suffix | default "%(funcName)s %(pathname)s:%(lineno)d" }}
# Prefix each line of exception output with this format. (string value)
# from .default.oslo.log.logging_exception_prefix
{{ if not .default.oslo.log.logging_exception_prefix }}#{{ end }}logging_exception_prefix = {{ .default.oslo.log.logging_exception_prefix | default "%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s" }}
# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
# from .default.oslo.log.logging_user_identity_format
{{ if not .default.oslo.log.logging_user_identity_format }}#{{ end }}logging_user_identity_format = {{ .default.oslo.log.logging_user_identity_format | default "%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s" }}
# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list
# value)
# from .default.oslo.log.default_log_levels
{{ if not .default.oslo.log.default_log_levels }}#{{ end }}default_log_levels = {{ .default.oslo.log.default_log_levels | default "amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO" }}
# Enables or disables publication of error events. (boolean value)
# from .default.oslo.log.publish_errors
{{ if not .default.oslo.log.publish_errors }}#{{ end }}publish_errors = {{ .default.oslo.log.publish_errors | default "false" }}
# The format for an instance that is passed with the log message. (string value)
# from .default.oslo.log.instance_format
{{ if not .default.oslo.log.instance_format }}#{{ end }}instance_format = {{ .default.oslo.log.instance_format | default "\"[instance: %(uuid)s] \"" }}
# The format for an instance UUID that is passed with the log message. (string value)
# from .default.oslo.log.instance_uuid_format
{{ if not .default.oslo.log.instance_uuid_format }}#{{ end }}instance_uuid_format = {{ .default.oslo.log.instance_uuid_format | default "\"[instance: %(uuid)s] \"" }}
# Enables or disables fatal status of deprecations. (boolean value)
# from .default.oslo.log.fatal_deprecations
{{ if not .default.oslo.log.fatal_deprecations }}#{{ end }}fatal_deprecations = {{ .default.oslo.log.fatal_deprecations | default "false" }}
#
# From oslo.messaging
#
# Size of RPC connection pool. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
# from .default.oslo.messaging.rpc_conn_pool_size
{{ if not .default.oslo.messaging.rpc_conn_pool_size }}#{{ end }}rpc_conn_pool_size = {{ .default.oslo.messaging.rpc_conn_pool_size | default "30" }}
# The pool size limit for connections expiration policy (integer value)
# from .default.oslo.messaging.conn_pool_min_size
{{ if not .default.oslo.messaging.conn_pool_min_size }}#{{ end }}conn_pool_min_size = {{ .default.oslo.messaging.conn_pool_min_size | default "2" }}
# The time-to-live in sec of idle connections in the pool (integer value)
# from .default.oslo.messaging.conn_pool_ttl
{{ if not .default.oslo.messaging.conn_pool_ttl }}#{{ end }}conn_pool_ttl = {{ .default.oslo.messaging.conn_pool_ttl | default "1200" }}
# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or
# resolve to this address. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
# from .default.oslo.messaging.rpc_zmq_bind_address
{{ if not .default.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .default.oslo.messaging.rpc_zmq_bind_address | default "*" }}
# MatchMaker driver. (string value)
# Allowed values: redis, dummy
# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
# from .default.oslo.messaging.rpc_zmq_matchmaker
{{ if not .default.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .default.oslo.messaging.rpc_zmq_matchmaker | default "redis" }}
# Number of ZeroMQ contexts, defaults to 1. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
# from .default.oslo.messaging.rpc_zmq_contexts
{{ if not .default.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .default.oslo.messaging.rpc_zmq_contexts | default "1" }}
# Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
# from .default.oslo.messaging.rpc_zmq_topic_backlog
{{ if not .default.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .default.oslo.messaging.rpc_zmq_topic_backlog | default "<None>" }}
# Directory for holding IPC sockets. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
# from .default.oslo.messaging.rpc_zmq_ipc_dir
{{ if not .default.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .default.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }}
# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string
# value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_host
# from .default.oslo.messaging.rpc_zmq_host
{{ if not .default.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .default.oslo.messaging.rpc_zmq_host | default "localhost" }}
# Seconds to wait before a cast expires (TTL). The default value of -1 specifies an infinite linger period. The value
# of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Only
# supported by impl_zmq. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
# from .default.oslo.messaging.rpc_cast_timeout
{{ if not .default.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .default.oslo.messaging.rpc_cast_timeout | default "-1" }}
# The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer
# value)
# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
# from .default.oslo.messaging.rpc_poll_timeout
{{ if not .default.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .default.oslo.messaging.rpc_poll_timeout | default "1" }}
# Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value)
# Deprecated group/name - [DEFAULT]/zmq_target_expire
# from .default.oslo.messaging.zmq_target_expire
{{ if not .default.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .default.oslo.messaging.zmq_target_expire | default "300" }}
# Update period in seconds of a name service record about existing target. (integer value)
# Deprecated group/name - [DEFAULT]/zmq_target_update
# from .default.oslo.messaging.zmq_target_update
{{ if not .default.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .default.oslo.messaging.zmq_target_update | default "180" }}
# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value)
# Deprecated group/name - [DEFAULT]/use_pub_sub
# from .default.oslo.messaging.use_pub_sub
{{ if not .default.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .default.oslo.messaging.use_pub_sub | default "true" }}
# Use ROUTER remote proxy. (boolean value)
# Deprecated group/name - [DEFAULT]/use_router_proxy
# from .default.oslo.messaging.use_router_proxy
{{ if not .default.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .default.oslo.messaging.use_router_proxy | default "true" }}
# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
# from .default.oslo.messaging.rpc_zmq_min_port
{{ if not .default.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .default.oslo.messaging.rpc_zmq_min_port | default "49153" }}
# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
# from .default.oslo.messaging.rpc_zmq_max_port
{{ if not .default.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .default.oslo.messaging.rpc_zmq_max_port | default "65536" }}
# Number of retries to find free port number before fail with ZMQBindError. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
# from .default.oslo.messaging.rpc_zmq_bind_port_retries
{{ if not .default.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .default.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }}
# Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value)
# Allowed values: json, msgpack
# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
# from .default.oslo.messaging.rpc_zmq_serialization
{{ if not .default.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .default.oslo.messaging.rpc_zmq_serialization | default "json" }}
# This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects.
# False means to keep queue and messages even if server is disconnected, when the server appears we send all
# accumulated messages to it. (boolean value)
# from .default.oslo.messaging.zmq_immediate
{{ if not .default.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .default.oslo.messaging.zmq_immediate | default "false" }}
# Size of executor thread pool. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
# from .default.oslo.messaging.executor_thread_pool_size
{{ if not .default.oslo.messaging.executor_thread_pool_size }}#{{ end }}executor_thread_pool_size = {{ .default.oslo.messaging.executor_thread_pool_size | default "64" }}
# Seconds to wait for a response from a call. (integer value)
# from .default.oslo.messaging.rpc_response_timeout
{{ if not .default.oslo.messaging.rpc_response_timeout }}#{{ end }}rpc_response_timeout = {{ .default.oslo.messaging.rpc_response_timeout | default "60" }}
# A URL representing the messaging driver to use and its full configuration. (string value)
# from .default.oslo.messaging.transport_url
{{ if not .default.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .default.oslo.messaging.transport_url | default "<None>" }}
# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .default.oslo.messaging.rpc_backend
{{ if not .default.oslo.messaging.rpc_backend }}#{{ end }}rpc_backend = {{ .default.oslo.messaging.rpc_backend | default "rabbit" }}
# The default exchange under which topics are scoped. May be overridden by an exchange name specified in the
# transport_url option. (string value)
# from .default.oslo.messaging.control_exchange
{{ if not .default.oslo.messaging.control_exchange }}#{{ end }}control_exchange = {{ .default.oslo.messaging.control_exchange | default "openstack" }}
#
# From oslo.service.periodic_task
#
# Some periodic tasks can be run in a separate process. Should we run them here? (boolean value)
# from .default.oslo.service.periodic_task.run_external_periodic_tasks
{{ if not .default.oslo.service.periodic_task.run_external_periodic_tasks }}#{{ end }}run_external_periodic_tasks = {{ .default.oslo.service.periodic_task.run_external_periodic_tasks | default "true" }}
#
# From oslo.service.service
#
# Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a
# random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that
# port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range
# of port numbers. The chosen port is displayed in the service's log file. (string value)
# from .default.oslo.service.service.backdoor_port
{{ if not .default.oslo.service.service.backdoor_port }}#{{ end }}backdoor_port = {{ .default.oslo.service.service.backdoor_port | default "<None>" }}
# Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is
# mutually exclusive with 'backdoor_port' in that only one should be provided. If both are provided then the existence
# of this option overrides the usage of that option. (string value)
# from .default.oslo.service.service.backdoor_socket
{{ if not .default.oslo.service.service.backdoor_socket }}#{{ end }}backdoor_socket = {{ .default.oslo.service.service.backdoor_socket | default "<None>" }}
# Enables or disables logging values of all registered options when starting a service (at DEBUG level). (boolean
# value)
# from .default.oslo.service.service.log_options
{{ if not .default.oslo.service.service.log_options }}#{{ end }}log_options = {{ .default.oslo.service.service.log_options | default "true" }}
# Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait. (integer value)
# from .default.oslo.service.service.graceful_shutdown_timeout
{{ if not .default.oslo.service.service.graceful_shutdown_timeout }}#{{ end }}graceful_shutdown_timeout = {{ .default.oslo.service.service.graceful_shutdown_timeout | default "60" }}
#
# From senlin.config
#
# Default cloud backend to use. (string value)
# from .default.senlin.config.cloud_backend
{{ if not .default.senlin.config.cloud_backend }}#{{ end }}cloud_backend = {{ .default.senlin.config.cloud_backend | default "openstack" }}
# Name of the engine node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address.
# (string value)
# from .default.senlin.config.host
{{ if not .default.senlin.config.host }}#{{ end }}host = {{ .default.senlin.config.host | default "aaed021d3eb8" }}
# Seconds between running periodic tasks. (integer value)
# from .default.senlin.config.periodic_interval
{{ if not .default.senlin.config.periodic_interval }}#{{ end }}periodic_interval = {{ .default.senlin.config.periodic_interval | default "60" }}
# Seconds between periodic tasks to be called (integer value)
# from .default.senlin.config.periodic_interval_max
{{ if not .default.senlin.config.periodic_interval_max }}#{{ end }}periodic_interval_max = {{ .default.senlin.config.periodic_interval_max | default "120" }}
# Range of seconds to randomly delay when starting the periodic task scheduler to reduce stampeding. (Disable by
# setting to 0) (integer value)
# from .default.senlin.config.periodic_fuzzy_delay
{{ if not .default.senlin.config.periodic_fuzzy_delay }}#{{ end }}periodic_fuzzy_delay = {{ .default.senlin.config.periodic_fuzzy_delay | default "10" }}
# Number of senlin-engine processes to fork and run. (integer value)
# from .default.senlin.config.num_engine_workers
{{ if not .default.senlin.config.num_engine_workers }}#{{ end }}num_engine_workers = {{ .default.senlin.config.num_engine_workers | default "1" }}
# The directory to search for environment files. (string value)
# from .default.senlin.config.environment_dir
{{ if not .default.senlin.config.environment_dir }}#{{ end }}environment_dir = {{ .default.senlin.config.environment_dir | default "/etc/senlin/environments" }}
# Maximum nodes allowed per top-level cluster. (integer value)
# from .default.senlin.config.max_nodes_per_cluster
{{ if not .default.senlin.config.max_nodes_per_cluster }}#{{ end }}max_nodes_per_cluster = {{ .default.senlin.config.max_nodes_per_cluster | default "1000" }}
# Maximum number of clusters any one project may have active at one time. (integer value)
# from .default.senlin.config.max_clusters_per_project
{{ if not .default.senlin.config.max_clusters_per_project }}#{{ end }}max_clusters_per_project = {{ .default.senlin.config.max_clusters_per_project | default "100" }}
# Timeout in seconds for actions. (integer value)
# from .default.senlin.config.default_action_timeout
{{ if not .default.senlin.config.default_action_timeout }}#{{ end }}default_action_timeout = {{ .default.senlin.config.default_action_timeout | default "3600" }}
# Maximum number of node actions that each engine worker can schedule consecutively per batch. 0 means no limit.
# (integer value)
# from .default.senlin.config.max_actions_per_batch
{{ if not .default.senlin.config.max_actions_per_batch }}#{{ end }}max_actions_per_batch = {{ .default.senlin.config.max_actions_per_batch | default "0" }}
# Seconds to pause between scheduling two consecutive batches of node actions. (integer value)
# from .default.senlin.config.batch_interval
{{ if not .default.senlin.config.batch_interval }}#{{ end }}batch_interval = {{ .default.senlin.config.batch_interval | default "3" }}
# Number of times trying to grab a lock. (integer value)
# from .default.senlin.config.lock_retry_times
{{ if not .default.senlin.config.lock_retry_times }}#{{ end }}lock_retry_times = {{ .default.senlin.config.lock_retry_times | default "3" }}
# Number of seconds between lock retries. (integer value)
# from .default.senlin.config.lock_retry_interval
{{ if not .default.senlin.config.lock_retry_interval }}#{{ end }}lock_retry_interval = {{ .default.senlin.config.lock_retry_interval | default "10" }}
# RPC timeout for the engine liveness check that is used for cluster locking. (integer value)
# from .default.senlin.config.engine_life_check_timeout
{{ if not .default.senlin.config.engine_life_check_timeout }}#{{ end }}engine_life_check_timeout = {{ .default.senlin.config.engine_life_check_timeout | default "2" }}
# Flag to indicate whether to enforce unique names for Senlin objects belonging to the same project. (boolean value)
# from .default.senlin.config.name_unique
{{ if not .default.senlin.config.name_unique }}#{{ end }}name_unique = {{ .default.senlin.config.name_unique | default "false" }}
# Default region name used to get services endpoints. (string value)
# from .default.senlin.config.default_region_name
{{ if not .default.senlin.config.default_region_name }}#{{ end }}default_region_name = {{ .default.senlin.config.default_region_name | default "<None>" }}
# Maximum raw byte size of data from web response. (integer value)
# from .default.senlin.config.max_response_size
{{ if not .default.senlin.config.max_response_size }}#{{ end }}max_response_size = {{ .default.senlin.config.max_response_size | default "524288" }}
[authentication]
#
# From senlin.config
#
# Complete public identity V3 API endpoint. (string value)
# from .authentication.senlin.config.auth_url
{{ if not .authentication.senlin.config.auth_url }}#{{ end }}auth_url = {{ .authentication.senlin.config.auth_url | default "" }}
# Senlin service user name (string value)
# from .authentication.senlin.config.service_username
{{ if not .authentication.senlin.config.service_username }}#{{ end }}service_username = {{ .authentication.senlin.config.service_username | default "senlin" }}
# Password specified for the Senlin service user. (string value)
# from .authentication.senlin.config.service_password
{{ if not .authentication.senlin.config.service_password }}#{{ end }}service_password = {{ .authentication.senlin.config.service_password | default "" }}
# Name of the service project. (string value)
# from .authentication.senlin.config.service_project_name
{{ if not .authentication.senlin.config.service_project_name }}#{{ end }}service_project_name = {{ .authentication.senlin.config.service_project_name | default "service" }}
# Name of the domain for the service user. (string value)
# from .authentication.senlin.config.service_user_domain
{{ if not .authentication.senlin.config.service_user_domain }}#{{ end }}service_user_domain = {{ .authentication.senlin.config.service_user_domain | default "Default" }}
# Name of the domain for the service project. (string value)
# from .authentication.senlin.config.service_project_domain
{{ if not .authentication.senlin.config.service_project_domain }}#{{ end }}service_project_domain = {{ .authentication.senlin.config.service_project_domain | default "Default" }}
[database]
#
# From oslo.db
#
# DEPRECATED: The file name to use with SQLite. (string value)
# Deprecated group/name - [DEFAULT]/sqlite_db
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Should use config option connection or slave_connection to connect the database.
# from .database.oslo.db.sqlite_db
{{ if not .database.oslo.db.sqlite_db }}#{{ end }}sqlite_db = {{ .database.oslo.db.sqlite_db | default "oslo.sqlite" }}
# If True, SQLite uses synchronous mode. (boolean value)
# Deprecated group/name - [DEFAULT]/sqlite_synchronous
# from .database.oslo.db.sqlite_synchronous
{{ if not .database.oslo.db.sqlite_synchronous }}#{{ end }}sqlite_synchronous = {{ .database.oslo.db.sqlite_synchronous | default "true" }}
# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
# from .database.oslo.db.backend
{{ if not .database.oslo.db.backend }}#{{ end }}backend = {{ .database.oslo.db.backend | default "sqlalchemy" }}
# The SQLAlchemy connection string to use to connect to the database. (string value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
# from .database.oslo.db.connection
{{ if not .database.oslo.db.connection }}#{{ end }}connection = {{ .database.oslo.db.connection | default "<None>" }}
# The SQLAlchemy connection string to use to connect to the slave database. (string value)
# from .database.oslo.db.slave_connection
{{ if not .database.oslo.db.slave_connection }}#{{ end }}slave_connection = {{ .database.oslo.db.slave_connection | default "<None>" }}
# The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To
# use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode= (string
# value)
# from .database.oslo.db.mysql_sql_mode
{{ if not .database.oslo.db.mysql_sql_mode }}#{{ end }}mysql_sql_mode = {{ .database.oslo.db.mysql_sql_mode | default "TRADITIONAL" }}
# Timeout before idle SQL connections are reaped. (integer value)
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
# Deprecated group/name - [DATABASE]/sql_idle_timeout
# Deprecated group/name - [sql]/idle_timeout
# from .database.oslo.db.idle_timeout
{{ if not .database.oslo.db.idle_timeout }}#{{ end }}idle_timeout = {{ .database.oslo.db.idle_timeout | default "3600" }}
# Minimum number of SQL connections to keep open in a pool. (integer value)
# Deprecated group/name - [DEFAULT]/sql_min_pool_size
# Deprecated group/name - [DATABASE]/sql_min_pool_size
# from .database.oslo.db.min_pool_size
{{ if not .database.oslo.db.min_pool_size }}#{{ end }}min_pool_size = {{ .database.oslo.db.min_pool_size | default "1" }}
# Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
# Deprecated group/name - [DATABASE]/sql_max_pool_size
# from .database.oslo.db.max_pool_size
{{ if not .database.oslo.db.max_pool_size }}#{{ end }}max_pool_size = {{ .database.oslo.db.max_pool_size | default "5" }}
# Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count. (integer
# value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
# from .database.oslo.db.max_retries
{{ if not .database.oslo.db.max_retries }}#{{ end }}max_retries = {{ .database.oslo.db.max_retries | default "10" }}
# Interval between retries of opening a SQL connection. (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
# from .database.oslo.db.retry_interval
{{ if not .database.oslo.db.retry_interval }}#{{ end }}retry_interval = {{ .database.oslo.db.retry_interval | default "10" }}
# If set, use this value for max_overflow with SQLAlchemy. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
# from .database.oslo.db.max_overflow
{{ if not .database.oslo.db.max_overflow }}#{{ end }}max_overflow = {{ .database.oslo.db.max_overflow | default "50" }}
# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer value)
# Minimum value: 0
# Maximum value: 100
# Deprecated group/name - [DEFAULT]/sql_connection_debug
# from .database.oslo.db.connection_debug
{{ if not .database.oslo.db.connection_debug }}#{{ end }}connection_debug = {{ .database.oslo.db.connection_debug | default "0" }}
# Add Python stack traces to SQL as comment strings. (boolean value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
# from .database.oslo.db.connection_trace
{{ if not .database.oslo.db.connection_trace }}#{{ end }}connection_trace = {{ .database.oslo.db.connection_trace | default "false" }}
# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
# from .database.oslo.db.pool_timeout
{{ if not .database.oslo.db.pool_timeout }}#{{ end }}pool_timeout = {{ .database.oslo.db.pool_timeout | default "<None>" }}
# Enable the experimental use of database reconnect on connection lost. (boolean value)
# from .database.oslo.db.use_db_reconnect
{{ if not .database.oslo.db.use_db_reconnect }}#{{ end }}use_db_reconnect = {{ .database.oslo.db.use_db_reconnect | default "false" }}
# Seconds between retries of a database transaction. (integer value)
# from .database.oslo.db.db_retry_interval
{{ if not .database.oslo.db.db_retry_interval }}#{{ end }}db_retry_interval = {{ .database.oslo.db.db_retry_interval | default "1" }}
# If True, increases the interval between retries of a database operation up to db_max_retry_interval. (boolean value)
# from .database.oslo.db.db_inc_retry_interval
{{ if not .database.oslo.db.db_inc_retry_interval }}#{{ end }}db_inc_retry_interval = {{ .database.oslo.db.db_inc_retry_interval | default "true" }}
# If db_inc_retry_interval is set, the maximum seconds between retries of a database operation. (integer value)
# from .database.oslo.db.db_max_retry_interval
{{ if not .database.oslo.db.db_max_retry_interval }}#{{ end }}db_max_retry_interval = {{ .database.oslo.db.db_max_retry_interval | default "10" }}
# Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an
# infinite retry count. (integer value)
# from .database.oslo.db.db_max_retries
{{ if not .database.oslo.db.db_max_retries }}#{{ end }}db_max_retries = {{ .database.oslo.db.db_max_retries | default "20" }}
[keystone_authtoken]
# FIXME(alanmeadows) - added the next several lines because oslo gen config refuses to generate the line items required in keystonemiddleware
# for authentication - while it does support an "auth_section" parameter to locate these elsewhere, it would be a strange divergence
# from how neutron keystone authentication is stored today - ocata and later appear to use a "service" user section which can house these details
# and does successfully generate beyond newton, so likely this whole section will be removed the next time we generate this file
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "<None>" }}
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "<None>" }}
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_name }}#{{ end }}project_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_name | default "<None>" }}
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name }}#{{ end }}project_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name | default "<None>" }}
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name }}#{{ end }}user_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name | default "<None>" }}
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.username }}#{{ end }}username = {{ .keystone_authtoken.keystonemiddleware.auth_token.username | default "<None>" }}
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.password }}#{{ end }}password = {{ .keystone_authtoken.keystonemiddleware.auth_token.password | default "<None>" }}
# FIXME(alanmeadows) - added for some newton images using older keystoneauth1 libs but are still "newton"
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "<None>" }}
#
# From keystonemiddleware.auth_token
#
# Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible
# by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint
# should ideally be unversioned, client support in the wild varies. If you're using a versioned v2 endpoint here,
# then this should *not* be the same endpoint the service user utilizes for validating tokens, because normal end
# users may not be able to reach that endpoint. (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.auth_uri
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_uri }}#{{ end }}auth_uri = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_uri | default "<None>" }}
# API version of the admin Identity API endpoint. (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.auth_version
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_version }}#{{ end }}auth_version = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_version | default "<None>" }}
# Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream
# WSGI components. (boolean value)
# from .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision }}#{{ end }}delay_auth_decision = {{ .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision | default "false" }}
# Request timeout value for communicating with Identity API server. (integer value)
# from .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout }}#{{ end }}http_connect_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout | default "<None>" }}
# How many times are we trying to reconnect when communicating with Identity API Server. (integer value)
# from .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries }}#{{ end }}http_request_max_retries = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries | default "3" }}
# Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift
# cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the
# ``memcached_servers`` option instead. (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.cache
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.cache }}#{{ end }}cache = {{ .keystone_authtoken.keystonemiddleware.auth_token.cache | default "<None>" }}
# Required if identity server requires client certificate (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.certfile
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.certfile }}#{{ end }}certfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.certfile | default "<None>" }}
# Required if identity server requires client certificate (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.keyfile
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.keyfile }}#{{ end }}keyfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.keyfile | default "<None>" }}
# A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs. (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.cafile
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.cafile }}#{{ end }}cafile = {{ .keystone_authtoken.keystonemiddleware.auth_token.cafile | default "<None>" }}
# Verify HTTPS connections. (boolean value)
# from .keystone_authtoken.keystonemiddleware.auth_token.insecure
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.insecure }}#{{ end }}insecure = {{ .keystone_authtoken.keystonemiddleware.auth_token.insecure | default "false" }}
# The region in which the identity server can be found. (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.region_name
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "<None>" }}
# Directory used to cache files related to PKI tokens. (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.signing_dir
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.signing_dir }}#{{ end }}signing_dir = {{ .keystone_authtoken.keystonemiddleware.auth_token.signing_dir | default "<None>" }}
# Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached
# in-process. (list value)
# Deprecated group/name - [keystone_authtoken]/memcache_servers
# from .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers }}#{{ end }}memcached_servers = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers | default "<None>" }}
# In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a
# configurable duration (in seconds). Set to -1 to disable caching completely. (integer value)
# from .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time }}#{{ end }}token_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time | default "300" }}
# Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A
# high number of revocation events combined with a low cache duration may significantly reduce performance. Only valid
# for PKI tokens. (integer value)
# from .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time }}#{{ end }}revocation_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time | default "10" }}
# (Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC,
# token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the
# cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.
# (string value)
# Allowed values: None, MAC, ENCRYPT
# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy }}#{{ end }}memcache_security_strategy = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy | default "None" }}
# (Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation. (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key }}#{{ end }}memcache_secret_key = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key | default "<None>" }}
# (Optional) Number of seconds memcached server is considered dead before it is tried again. (integer value)
# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry }}#{{ end }}memcache_pool_dead_retry = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry | default "300" }}
# (Optional) Maximum total number of open connections to every memcached server. (integer value)
# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize }}#{{ end }}memcache_pool_maxsize = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize | default "10" }}
# (Optional) Socket timeout in seconds for communicating with a memcached server. (integer value)
# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout }}#{{ end }}memcache_pool_socket_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout | default "3" }}
# (Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed. (integer
# value)
# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout }}#{{ end }}memcache_pool_unused_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout | default "60" }}
# (Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool. (integer
# value)
# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout }}#{{ end }}memcache_pool_conn_get_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout | default "10" }}
# (Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.
# (boolean value)
# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool }}#{{ end }}memcache_use_advanced_pool = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool | default "false" }}
# (Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service
# catalog on token validation and will not set the X-Service-Catalog header. (boolean value)
# from .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog }}#{{ end }}include_service_catalog = {{ .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog | default "true" }}
# Used to control the use and type of token binding. Can be set to: "disabled" to not check token binding. "permissive"
# (default) to validate binding information if the bind type is of a form known to the server and ignore it if not.
# "strict" like "permissive" but if the bind type is unknown the token will be rejected. "required" any form of token
# binding is needed to be allowed. Finally the name of a binding method that must be present in tokens. (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind }}#{{ end }}enforce_token_bind = {{ .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind | default "permissive" }}
# If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the
# identity server. (boolean value)
# from .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached }}#{{ end }}check_revocations_for_cached = {{ .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached | default "false" }}
# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those
# supported by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one
# first for performance. The result of the first hash will be stored in the cache. This will typically be set to
# multiple values only while migrating from a less secure algorithm to a more secure one. Once all the old tokens are
# expired this option should be set to a single value for better performance. (list value)
# from .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms }}#{{ end }}hash_algorithms = {{ .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms | default "md5" }}
# Authentication type to load (string value)
# Deprecated group/name - [keystone_authtoken]/auth_plugin
# from .keystone_authtoken.keystonemiddleware.auth_token.auth_type
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_type }}#{{ end }}auth_type = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_type | default "<None>" }}
# Config Section from which to load plugin specific options (string value)
# from .keystone_authtoken.keystonemiddleware.auth_token.auth_section
{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_section }}#{{ end }}auth_section = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_section | default "<None>" }}
[matchmaker_redis]
#
# From oslo.messaging
#
# DEPRECATED: Host to locate redis. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .matchmaker_redis.oslo.messaging.host
{{ if not .matchmaker_redis.oslo.messaging.host }}#{{ end }}host = {{ .matchmaker_redis.oslo.messaging.host | default "127.0.0.1" }}
# DEPRECATED: Use this port to connect to redis host. (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .matchmaker_redis.oslo.messaging.port
{{ if not .matchmaker_redis.oslo.messaging.port }}#{{ end }}port = {{ .matchmaker_redis.oslo.messaging.port | default "6379" }}
# DEPRECATED: Password for Redis server (optional). (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .matchmaker_redis.oslo.messaging.password
{{ if not .matchmaker_redis.oslo.messaging.password }}#{{ end }}password = {{ .matchmaker_redis.oslo.messaging.password | default "" }}
# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode) e.g. [host:port, host1:port ... ]
# (list value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .matchmaker_redis.oslo.messaging.sentinel_hosts
{{ if not .matchmaker_redis.oslo.messaging.sentinel_hosts }}#{{ end }}sentinel_hosts = {{ .matchmaker_redis.oslo.messaging.sentinel_hosts | default "" }}
# Redis replica set name. (string value)
# from .matchmaker_redis.oslo.messaging.sentinel_group_name
{{ if not .matchmaker_redis.oslo.messaging.sentinel_group_name }}#{{ end }}sentinel_group_name = {{ .matchmaker_redis.oslo.messaging.sentinel_group_name | default "oslo-messaging-zeromq" }}
# Time in ms to wait between connection attempts. (integer value)
# from .matchmaker_redis.oslo.messaging.wait_timeout
{{ if not .matchmaker_redis.oslo.messaging.wait_timeout }}#{{ end }}wait_timeout = {{ .matchmaker_redis.oslo.messaging.wait_timeout | default "2000" }}
# Time in ms to wait before the transaction is killed. (integer value)
# from .matchmaker_redis.oslo.messaging.check_timeout
{{ if not .matchmaker_redis.oslo.messaging.check_timeout }}#{{ end }}check_timeout = {{ .matchmaker_redis.oslo.messaging.check_timeout | default "20000" }}
# Timeout in ms on blocking socket operations (integer value)
# from .matchmaker_redis.oslo.messaging.socket_timeout
{{ if not .matchmaker_redis.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .matchmaker_redis.oslo.messaging.socket_timeout | default "10000" }}
[oslo_messaging_amqp]
#
# From oslo.messaging
#
# Name for the AMQP container. must be globally unique. Defaults to a generated UUID (string value)
# Deprecated group/name - [amqp1]/container_name
# from .oslo_messaging_amqp.oslo.messaging.container_name
{{ if not .oslo_messaging_amqp.oslo.messaging.container_name }}#{{ end }}container_name = {{ .oslo_messaging_amqp.oslo.messaging.container_name | default "<None>" }}
# Timeout for inactive connections (in seconds) (integer value)
# Deprecated group/name - [amqp1]/idle_timeout
# from .oslo_messaging_amqp.oslo.messaging.idle_timeout
{{ if not .oslo_messaging_amqp.oslo.messaging.idle_timeout }}#{{ end }}idle_timeout = {{ .oslo_messaging_amqp.oslo.messaging.idle_timeout | default "0" }}
# Debug: dump AMQP frames to stdout (boolean value)
# Deprecated group/name - [amqp1]/trace
# from .oslo_messaging_amqp.oslo.messaging.trace
{{ if not .oslo_messaging_amqp.oslo.messaging.trace }}#{{ end }}trace = {{ .oslo_messaging_amqp.oslo.messaging.trace | default "false" }}
# CA certificate PEM file to verify server certificate (string value)
# Deprecated group/name - [amqp1]/ssl_ca_file
# from .oslo_messaging_amqp.oslo.messaging.ssl_ca_file
{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_ca_file }}#{{ end }}ssl_ca_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_ca_file | default "" }}
# Identifying certificate PEM file to present to clients (string value)
# Deprecated group/name - [amqp1]/ssl_cert_file
# from .oslo_messaging_amqp.oslo.messaging.ssl_cert_file
{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_cert_file }}#{{ end }}ssl_cert_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_cert_file | default "" }}
# Private key PEM file used to sign cert_file certificate (string value)
# Deprecated group/name - [amqp1]/ssl_key_file
# from .oslo_messaging_amqp.oslo.messaging.ssl_key_file
{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_file }}#{{ end }}ssl_key_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_file | default "" }}
# Password for decrypting ssl_key_file (if encrypted) (string value)
# Deprecated group/name - [amqp1]/ssl_key_password
# from .oslo_messaging_amqp.oslo.messaging.ssl_key_password
{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_password }}#{{ end }}ssl_key_password = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_password | default "<None>" }}
# Accept clients using either SSL or plain TCP (boolean value)
# Deprecated group/name - [amqp1]/allow_insecure_clients
# from .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients
{{ if not .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients }}#{{ end }}allow_insecure_clients = {{ .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients | default "false" }}
# Space separated list of acceptable SASL mechanisms (string value)
# Deprecated group/name - [amqp1]/sasl_mechanisms
# from .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms
{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms }}#{{ end }}sasl_mechanisms = {{ .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms | default "" }}
# Path to directory that contains the SASL configuration (string value)
# Deprecated group/name - [amqp1]/sasl_config_dir
# from .oslo_messaging_amqp.oslo.messaging.sasl_config_dir
{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_dir }}#{{ end }}sasl_config_dir = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_dir | default "" }}
# Name of configuration file (without .conf suffix) (string value)
# Deprecated group/name - [amqp1]/sasl_config_name
# from .oslo_messaging_amqp.oslo.messaging.sasl_config_name
{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_name }}#{{ end }}sasl_config_name = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_name | default "" }}
# User name for message broker authentication (string value)
# Deprecated group/name - [amqp1]/username
# from .oslo_messaging_amqp.oslo.messaging.username
{{ if not .oslo_messaging_amqp.oslo.messaging.username }}#{{ end }}username = {{ .oslo_messaging_amqp.oslo.messaging.username | default "" }}
# Password for message broker authentication (string value)
# Deprecated group/name - [amqp1]/password
# from .oslo_messaging_amqp.oslo.messaging.password
{{ if not .oslo_messaging_amqp.oslo.messaging.password }}#{{ end }}password = {{ .oslo_messaging_amqp.oslo.messaging.password | default "" }}
# Seconds to pause before attempting to re-connect. (integer value)
# Minimum value: 1
# from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval
{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval }}#{{ end }}connection_retry_interval = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval | default "1" }}
# Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt. (integer value)
# Minimum value: 0
# from .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff
{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff }}#{{ end }}connection_retry_backoff = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff | default "2" }}
# Maximum limit for connection_retry_interval + connection_retry_backoff (integer value)
# Minimum value: 1
# from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max
{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max }}#{{ end }}connection_retry_interval_max = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max | default "30" }}
# Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error. (integer value)
# Minimum value: 1
# from .oslo_messaging_amqp.oslo.messaging.link_retry_delay
{{ if not .oslo_messaging_amqp.oslo.messaging.link_retry_delay }}#{{ end }}link_retry_delay = {{ .oslo_messaging_amqp.oslo.messaging.link_retry_delay | default "10" }}
# The deadline for an rpc reply message delivery. Only used when caller does not provide a timeout expiry. (integer
# value)
# Minimum value: 5
# from .oslo_messaging_amqp.oslo.messaging.default_reply_timeout
{{ if not .oslo_messaging_amqp.oslo.messaging.default_reply_timeout }}#{{ end }}default_reply_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_reply_timeout | default "30" }}
# The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.
# (integer value)
# Minimum value: 5
# from .oslo_messaging_amqp.oslo.messaging.default_send_timeout
{{ if not .oslo_messaging_amqp.oslo.messaging.default_send_timeout }}#{{ end }}default_send_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_send_timeout | default "30" }}
# The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.
# (integer value)
# Minimum value: 5
# from .oslo_messaging_amqp.oslo.messaging.default_notify_timeout
{{ if not .oslo_messaging_amqp.oslo.messaging.default_notify_timeout }}#{{ end }}default_notify_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_notify_timeout | default "30" }}
# Indicates the addressing mode used by the driver.
# Permitted values:
# 'legacy' - use legacy non-routable addressing
# 'routable' - use routable addresses
# 'dynamic' - use legacy addresses if the message bus does not support routing otherwise use routable addressing
# (string value)
# from .oslo_messaging_amqp.oslo.messaging.addressing_mode
{{ if not .oslo_messaging_amqp.oslo.messaging.addressing_mode }}#{{ end }}addressing_mode = {{ .oslo_messaging_amqp.oslo.messaging.addressing_mode | default "dynamic" }}
# address prefix used when sending to a specific server (string value)
# Deprecated group/name - [amqp1]/server_request_prefix
# from .oslo_messaging_amqp.oslo.messaging.server_request_prefix
{{ if not .oslo_messaging_amqp.oslo.messaging.server_request_prefix }}#{{ end }}server_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.server_request_prefix | default "exclusive" }}
# address prefix used when broadcasting to all servers (string value)
# Deprecated group/name - [amqp1]/broadcast_prefix
# from .oslo_messaging_amqp.oslo.messaging.broadcast_prefix
{{ if not .oslo_messaging_amqp.oslo.messaging.broadcast_prefix }}#{{ end }}broadcast_prefix = {{ .oslo_messaging_amqp.oslo.messaging.broadcast_prefix | default "broadcast" }}
# address prefix when sending to any server in group (string value)
# Deprecated group/name - [amqp1]/group_request_prefix
# from .oslo_messaging_amqp.oslo.messaging.group_request_prefix
{{ if not .oslo_messaging_amqp.oslo.messaging.group_request_prefix }}#{{ end }}group_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.group_request_prefix | default "unicast" }}
# Address prefix for all generated RPC addresses (string value)
# from .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix
{{ if not .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix }}#{{ end }}rpc_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix | default "openstack.org/om/rpc" }}
# Address prefix for all generated Notification addresses (string value)
# from .oslo_messaging_amqp.oslo.messaging.notify_address_prefix
{{ if not .oslo_messaging_amqp.oslo.messaging.notify_address_prefix }}#{{ end }}notify_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.notify_address_prefix | default "openstack.org/om/notify" }}
# Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.
# (string value)
# from .oslo_messaging_amqp.oslo.messaging.multicast_address
{{ if not .oslo_messaging_amqp.oslo.messaging.multicast_address }}#{{ end }}multicast_address = {{ .oslo_messaging_amqp.oslo.messaging.multicast_address | default "multicast" }}
# Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to
# identify messages sent to a single destination. (string value)
# from .oslo_messaging_amqp.oslo.messaging.unicast_address
{{ if not .oslo_messaging_amqp.oslo.messaging.unicast_address }}#{{ end }}unicast_address = {{ .oslo_messaging_amqp.oslo.messaging.unicast_address | default "unicast" }}
# Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages
# that should be delivered in a round-robin fashion across consumers. (string value)
# from .oslo_messaging_amqp.oslo.messaging.anycast_address
{{ if not .oslo_messaging_amqp.oslo.messaging.anycast_address }}#{{ end }}anycast_address = {{ .oslo_messaging_amqp.oslo.messaging.anycast_address | default "anycast" }}
# Exchange name used in notification addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_notification_exchange if set
# else control_exchange if set
# else 'notify' (string value)
# from .oslo_messaging_amqp.oslo.messaging.default_notification_exchange
{{ if not .oslo_messaging_amqp.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_notification_exchange | default "<None>" }}
# Exchange name used in RPC addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_rpc_exchange if set
# else control_exchange if set
# else 'rpc' (string value)
# from .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange
{{ if not .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange | default "<None>" }}
# Window size for incoming RPC Reply messages. (integer value)
# Minimum value: 1
# from .oslo_messaging_amqp.oslo.messaging.reply_link_credit
{{ if not .oslo_messaging_amqp.oslo.messaging.reply_link_credit }}#{{ end }}reply_link_credit = {{ .oslo_messaging_amqp.oslo.messaging.reply_link_credit | default "200" }}
# Window size for incoming RPC Request messages (integer value)
# Minimum value: 1
# from .oslo_messaging_amqp.oslo.messaging.rpc_server_credit
{{ if not .oslo_messaging_amqp.oslo.messaging.rpc_server_credit }}#{{ end }}rpc_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.rpc_server_credit | default "100" }}
# Window size for incoming Notification messages (integer value)
# Minimum value: 1
# from .oslo_messaging_amqp.oslo.messaging.notify_server_credit
{{ if not .oslo_messaging_amqp.oslo.messaging.notify_server_credit }}#{{ end }}notify_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.notify_server_credit | default "100" }}
[oslo_messaging_notifications]
#
# From oslo.messaging
#
# The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop
# (multi valued)
# Deprecated group/name - [DEFAULT]/notification_driver
# from .oslo_messaging_notifications.oslo.messaging.driver (multiopt)
{{ if not .oslo_messaging_notifications.oslo.messaging.driver }}#driver = {{ .oslo_messaging_notifications.oslo.messaging.driver | default "" }}{{ else }}{{ range .oslo_messaging_notifications.oslo.messaging.driver }}driver = {{ . }}{{ end }}{{ end }}
# A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration
# used for RPC. (string value)
# Deprecated group/name - [DEFAULT]/notification_transport_url
# from .oslo_messaging_notifications.oslo.messaging.transport_url
{{ if not .oslo_messaging_notifications.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .oslo_messaging_notifications.oslo.messaging.transport_url | default "<None>" }}
# AMQP topic used for OpenStack notifications. (list value)
# Deprecated group/name - [rpc_notifier2]/topics
# Deprecated group/name - [DEFAULT]/notification_topics
# from .oslo_messaging_notifications.oslo.messaging.topics
{{ if not .oslo_messaging_notifications.oslo.messaging.topics }}#{{ end }}topics = {{ .oslo_messaging_notifications.oslo.messaging.topics | default "notifications" }}
[oslo_messaging_rabbit]
#
# From oslo.messaging
#
# Use durable queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_durable_queues
# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
# from .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues
{{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues }}#{{ end }}amqp_durable_queues = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues | default "false" }}
# Auto-delete queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_auto_delete
# from .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete
{{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete }}#{{ end }}amqp_auto_delete = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete | default "false" }}
# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2
# may be available on some distributions. (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_version
# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version
{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version }}#{{ end }}kombu_ssl_version = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version | default "" }}
# SSL key file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile
{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile }}#{{ end }}kombu_ssl_keyfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile | default "" }}
# SSL cert file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile
{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile }}#{{ end }}kombu_ssl_certfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile | default "" }}
# SSL certification authority file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs
{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs }}#{{ end }}kombu_ssl_ca_certs = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs | default "" }}
# How long to wait before reconnecting in response to an AMQP consumer cancel notification. (floating point value)
# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
# from .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay
{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay }}#{{ end }}kombu_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay | default "1.0" }}
# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be
# available in future versions. (string value)
# from .oslo_messaging_rabbit.oslo.messaging.kombu_compression
{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_compression }}#{{ end }}kombu_compression = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_compression | default "<None>" }}
# How long to wait a missing client before abandoning to send it its replies. This value should not be longer than
# rpc_response_timeout. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
# from .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout
{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout }}#{{ end }}kombu_missing_consumer_retry_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout | default "60" }}
# Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable.
# Takes effect only if more than one RabbitMQ node is provided in config. (string value)
# Allowed values: round-robin, shuffle
# from .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy
{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy }}#{{ end }}kombu_failover_strategy = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy | default "round-robin" }}
# DEPRECATED: The RabbitMQ broker address where a single node is used. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_host
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_host
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_host }}#{{ end }}rabbit_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_host | default "localhost" }}
# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/rabbit_port
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_port
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_port }}#{{ end }}rabbit_port = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_port | default "5672" }}
# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
# Deprecated group/name - [DEFAULT]/rabbit_hosts
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts }}#{{ end }}rabbit_hosts = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts | default "$rabbit_host:$rabbit_port" }}
# Connect over SSL for RabbitMQ. (boolean value)
# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl }}#{{ end }}rabbit_use_ssl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl | default "false" }}
# DEPRECATED: The RabbitMQ userid. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_userid
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_userid
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_userid }}#{{ end }}rabbit_userid = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_userid | default "guest" }}
# DEPRECATED: The RabbitMQ password. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_password
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_password
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_password }}#{{ end }}rabbit_password = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_password | default "guest" }}
# The RabbitMQ login method. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_login_method
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method }}#{{ end }}rabbit_login_method = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method | default "AMQPLAIN" }}
# DEPRECATED: The RabbitMQ virtual host. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host }}#{{ end }}rabbit_virtual_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host | default "/" }}
# How frequently to retry connecting with RabbitMQ. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval }}#{{ end }}rabbit_retry_interval = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval | default "1" }}
# How long to backoff for between retries when connecting to RabbitMQ. (integer value)
# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff }}#{{ end }}rabbit_retry_backoff = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff | default "2" }}
# Maximum interval of RabbitMQ connection retries. Default is 30 seconds. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max }}#{{ end }}rabbit_interval_max = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max | default "30" }}
# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count). (integer value)
# Deprecated group/name - [DEFAULT]/rabbit_max_retries
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries }}#{{ end }}rabbit_max_retries = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries | default "0" }}
# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database.
# In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you
# just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run:
# "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues }}#{{ end }}rabbit_ha_queues = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues | default "false" }}
# Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration
# of the TTL are automatically deleted. The parameter affects only reply and fanout queues. (integer value)
# Minimum value: 1
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl }}#{{ end }}rabbit_transient_queues_ttl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl | default "1800" }}
# Specifies the number of messages to prefetch. Setting to zero allows unlimited messages. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count
{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count }}#{{ end }}rabbit_qos_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count | default "0" }}
# Number of seconds after which the Rabbit broker is considered down if heartbeat's keep-alive fails (0 disable the
# heartbeat). EXPERIMENTAL (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold
{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold }}#{{ end }}heartbeat_timeout_threshold = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold | default "60" }}
# How often times during the heartbeat_timeout_threshold we check the heartbeat. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate
{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate }}#{{ end }}heartbeat_rate = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate | default "2" }}
# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
# Deprecated group/name - [DEFAULT]/fake_rabbit
# from .oslo_messaging_rabbit.oslo.messaging.fake_rabbit
{{ if not .oslo_messaging_rabbit.oslo.messaging.fake_rabbit }}#{{ end }}fake_rabbit = {{ .oslo_messaging_rabbit.oslo.messaging.fake_rabbit | default "false" }}
# Maximum number of channels to allow (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.channel_max
{{ if not .oslo_messaging_rabbit.oslo.messaging.channel_max }}#{{ end }}channel_max = {{ .oslo_messaging_rabbit.oslo.messaging.channel_max | default "<None>" }}
# The maximum byte size for an AMQP frame (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.frame_max
{{ if not .oslo_messaging_rabbit.oslo.messaging.frame_max }}#{{ end }}frame_max = {{ .oslo_messaging_rabbit.oslo.messaging.frame_max | default "<None>" }}
# How often to send heartbeats for consumer's connections (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval
{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval }}#{{ end }}heartbeat_interval = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval | default "3" }}
# Enable SSL (boolean value)
# from .oslo_messaging_rabbit.oslo.messaging.ssl
{{ if not .oslo_messaging_rabbit.oslo.messaging.ssl }}#{{ end }}ssl = {{ .oslo_messaging_rabbit.oslo.messaging.ssl | default "<None>" }}
# Arguments passed to ssl.wrap_socket (dict value)
# from .oslo_messaging_rabbit.oslo.messaging.ssl_options
{{ if not .oslo_messaging_rabbit.oslo.messaging.ssl_options }}#{{ end }}ssl_options = {{ .oslo_messaging_rabbit.oslo.messaging.ssl_options | default "<None>" }}
# Set socket timeout in seconds for connection's socket (floating point value)
# from .oslo_messaging_rabbit.oslo.messaging.socket_timeout
{{ if not .oslo_messaging_rabbit.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.socket_timeout | default "0.25" }}
# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point value)
# from .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout
{{ if not .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout }}#{{ end }}tcp_user_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout | default "0.25" }}
# Set delay for reconnection to some host which has connection error (floating point value)
# from .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay
{{ if not .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay }}#{{ end }}host_connection_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay | default "0.25" }}
# Connection factory implementation (string value)
# Allowed values: new, single, read_write
# from .oslo_messaging_rabbit.oslo.messaging.connection_factory
{{ if not .oslo_messaging_rabbit.oslo.messaging.connection_factory }}#{{ end }}connection_factory = {{ .oslo_messaging_rabbit.oslo.messaging.connection_factory | default "single" }}
# Maximum number of connections to keep queued. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.pool_max_size
{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_size }}#{{ end }}pool_max_size = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_size | default "30" }}
# Maximum number of connections to create above `pool_max_size`. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow
{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow }}#{{ end }}pool_max_overflow = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow | default "0" }}
# Default number of seconds to wait for a connections to available (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.pool_timeout
{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_timeout }}#{{ end }}pool_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.pool_timeout | default "30" }}
# Lifetime of a connection (since creation) in seconds or None for no recycling. Expired connections are closed on
# acquire. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.pool_recycle
{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_recycle }}#{{ end }}pool_recycle = {{ .oslo_messaging_rabbit.oslo.messaging.pool_recycle | default "600" }}
# Threshold at which inactive (since release) connections are considered stale in seconds or None for no staleness.
# Stale connections are closed on acquire. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.pool_stale
{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_stale }}#{{ end }}pool_stale = {{ .oslo_messaging_rabbit.oslo.messaging.pool_stale | default "60" }}
# Persist notification messages. (boolean value)
# from .oslo_messaging_rabbit.oslo.messaging.notification_persistence
{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_persistence }}#{{ end }}notification_persistence = {{ .oslo_messaging_rabbit.oslo.messaging.notification_persistence | default "false" }}
# Exchange name for sending notifications (string value)
# from .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange
{{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange | default "${control_exchange}_notification" }}
# Max number of not acknowledged message which RabbitMQ can send to notification listener. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count
{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count }}#{{ end }}notification_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count | default "100" }}
# Reconnecting retry count in case of connectivity problem during sending notification, -1 means infinite retry.
# (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts
{{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts }}#{{ end }}default_notification_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts | default "-1" }}
# Reconnecting retry delay in case of connectivity problem during sending notification message (floating point value)
# from .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay
{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay }}#{{ end }}notification_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay | default "0.25" }}
# Time to live for rpc queues without consumers in seconds. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration
{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration }}#{{ end }}rpc_queue_expiration = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration | default "60" }}
# Exchange name for sending RPC messages (string value)
# from .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange
{{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange | default "${control_exchange}_rpc" }}
# Exchange name for receiving RPC replies (string value)
# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange
{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange }}#{{ end }}rpc_reply_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange | default "${control_exchange}_rpc_reply" }}
# Max number of not acknowledged message which RabbitMQ can send to rpc listener. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count
{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count }}#{{ end }}rpc_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count | default "100" }}
# Max number of not acknowledged message which RabbitMQ can send to rpc reply listener. (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count
{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count }}#{{ end }}rpc_reply_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count | default "100" }}
# Reconnecting retry count in case of connectivity problem during sending reply. -1 means infinite retry during
# rpc_timeout (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts
{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts }}#{{ end }}rpc_reply_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts | default "-1" }}
# Reconnecting retry delay in case of connectivity problem during sending reply. (floating point value)
# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay
{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay }}#{{ end }}rpc_reply_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay | default "0.25" }}
# Reconnecting retry count in case of connectivity problem during sending RPC message, -1 means infinite retry. If
# actual retry attempts in not 0 the rpc request could be processed more then one time (integer value)
# from .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts
{{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts }}#{{ end }}default_rpc_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts | default "-1" }}
# Reconnecting retry delay in case of connectivity problem during sending RPC message (floating point value)
# from .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay
{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay }}#{{ end }}rpc_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay | default "0.25" }}
[oslo_messaging_zmq]
#
# From oslo.messaging
#
# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or
# resolve to this address. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address | default "*" }}
# MatchMaker driver. (string value)
# Allowed values: redis, dummy
# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker | default "redis" }}
# Number of ZeroMQ contexts, defaults to 1. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts | default "1" }}
# Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog | default "<None>" }}
# Directory for holding IPC sockets. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }}
# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string
# value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_host
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host | default "localhost" }}
# Seconds to wait before a cast expires (TTL). The default value of -1 specifies an infinite linger period. The value
# of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Only
# supported by impl_zmq. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
# from .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout | default "-1" }}
# The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer
# value)
# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
# from .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout | default "1" }}
# Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value)
# Deprecated group/name - [DEFAULT]/zmq_target_expire
# from .oslo_messaging_zmq.oslo.messaging.zmq_target_expire
{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_expire | default "300" }}
# Update period in seconds of a name service record about existing target. (integer value)
# Deprecated group/name - [DEFAULT]/zmq_target_update
# from .oslo_messaging_zmq.oslo.messaging.zmq_target_update
{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_update | default "180" }}
# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value)
# Deprecated group/name - [DEFAULT]/use_pub_sub
# from .oslo_messaging_zmq.oslo.messaging.use_pub_sub
{{ if not .oslo_messaging_zmq.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .oslo_messaging_zmq.oslo.messaging.use_pub_sub | default "true" }}
# Use ROUTER remote proxy. (boolean value)
# Deprecated group/name - [DEFAULT]/use_router_proxy
# from .oslo_messaging_zmq.oslo.messaging.use_router_proxy
{{ if not .oslo_messaging_zmq.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .oslo_messaging_zmq.oslo.messaging.use_router_proxy | default "true" }}
# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port | default "49153" }}
# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port | default "65536" }}
# Number of retries to find free port number before fail with ZMQBindError. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }}
# Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value)
# Allowed values: json, msgpack
# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization
{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization | default "json" }}
# This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects.
# False means to keep queue and messages even if server is disconnected, when the server appears we send all
# accumulated messages to it. (boolean value)
# from .oslo_messaging_zmq.oslo.messaging.zmq_immediate
{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .oslo_messaging_zmq.oslo.messaging.zmq_immediate | default "false" }}
[oslo_policy]
#
# From oslo.policy
#
# The JSON file that defines policies. (string value)
# Deprecated group/name - [DEFAULT]/policy_file
# from .oslo_policy.oslo.policy.policy_file
{{ if not .oslo_policy.oslo.policy.policy_file }}#{{ end }}policy_file = {{ .oslo_policy.oslo.policy.policy_file | default "policy.json" }}
# Default rule. Enforced when a requested rule is not found. (string value)
# Deprecated group/name - [DEFAULT]/policy_default_rule
# from .oslo_policy.oslo.policy.policy_default_rule
{{ if not .oslo_policy.oslo.policy.policy_default_rule }}#{{ end }}policy_default_rule = {{ .oslo_policy.oslo.policy.policy_default_rule | default "default" }}
# Directories where policy configuration files are stored. They can be relative to any directory in the search path
# defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories
# to be searched. Missing or empty directories are ignored. (multi valued)
# Deprecated group/name - [DEFAULT]/policy_dirs
# from .oslo_policy.oslo.policy.policy_dirs (multiopt)
{{ if not .oslo_policy.oslo.policy.policy_dirs }}#policy_dirs = {{ .oslo_policy.oslo.policy.policy_dirs | default "policy.d" }}{{ else }}{{ range .oslo_policy.oslo.policy.policy_dirs }}policy_dirs = {{ . }}{{ end }}{{ end }}
[revision]
#
# From senlin.config
#
# Senlin API revision. (string value)
# from .revision.senlin.config.senlin_api_revision
{{ if not .revision.senlin.config.senlin_api_revision }}#{{ end }}senlin_api_revision = {{ .revision.senlin.config.senlin_api_revision | default "1.0" }}
# Senlin engine revision. (string value)
# from .revision.senlin.config.senlin_engine_revision
{{ if not .revision.senlin.config.senlin_engine_revision }}#{{ end }}senlin_engine_revision = {{ .revision.senlin.config.senlin_engine_revision | default "1.0" }}
[senlin_api]
#
# From senlin.config
#
# Address to bind the server. Useful when selecting a particular network interface. (IP address value)
# from .senlin_api.senlin.config.bind_host
{{ if not .senlin_api.senlin.config.bind_host }}#{{ end }}bind_host = {{ .senlin_api.senlin.config.bind_host | default "0.0.0.0" }}
# The port on which the server will listen. (port value)
# Minimum value: 0
# Maximum value: 65535
# from .senlin_api.senlin.config.bind_port
{{ if not .senlin_api.senlin.config.bind_port }}#{{ end }}bind_port = {{ .senlin_api.senlin.config.bind_port | default "8778" }}
# Number of backlog requests to configure the socket with. (integer value)
# from .senlin_api.senlin.config.backlog
{{ if not .senlin_api.senlin.config.backlog }}#{{ end }}backlog = {{ .senlin_api.senlin.config.backlog | default "4096" }}
# Location of the SSL certificate file to use for SSL mode. (string value)
# from .senlin_api.senlin.config.cert_file
{{ if not .senlin_api.senlin.config.cert_file }}#{{ end }}cert_file = {{ .senlin_api.senlin.config.cert_file | default "<None>" }}
# Location of the SSL key file to use for enabling SSL mode. (string value)
# from .senlin_api.senlin.config.key_file
{{ if not .senlin_api.senlin.config.key_file }}#{{ end }}key_file = {{ .senlin_api.senlin.config.key_file | default "<None>" }}
# Number of workers for Senlin service. (integer value)
# from .senlin_api.senlin.config.workers
{{ if not .senlin_api.senlin.config.workers }}#{{ end }}workers = {{ .senlin_api.senlin.config.workers | default "0" }}
# Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens
# (typically those generated by the Keystone v3 API with big service catalogs). (integer value)
# from .senlin_api.senlin.config.max_header_line
{{ if not .senlin_api.senlin.config.max_header_line }}#{{ end }}max_header_line = {{ .senlin_api.senlin.config.max_header_line | default "16384" }}
# The value for the socket option TCP_KEEPIDLE. This is the time in seconds that the connection must be idle before
# TCP starts sending keepalive probes. (integer value)
# from .senlin_api.senlin.config.tcp_keepidle
{{ if not .senlin_api.senlin.config.tcp_keepidle }}#{{ end }}tcp_keepidle = {{ .senlin_api.senlin.config.tcp_keepidle | default "600" }}
# The API paste config file to use. (string value)
# Deprecated group/name - [paste_deploy]/api_paste_config
# from .senlin_api.senlin.config.api_paste_config
{{ if not .senlin_api.senlin.config.api_paste_config }}#{{ end }}api_paste_config = {{ .senlin_api.senlin.config.api_paste_config | default "api-paste.ini" }}
# If false, closes the client socket explicitly. (boolean value)
# Deprecated group/name - [eventlet_opts]/wsgi_keep_alive
# from .senlin_api.senlin.config.wsgi_keep_alive
{{ if not .senlin_api.senlin.config.wsgi_keep_alive }}#{{ end }}wsgi_keep_alive = {{ .senlin_api.senlin.config.wsgi_keep_alive | default "true" }}
# Timeout for client connections' socket operations. If an incoming connection is idle for this number of seconds it
# will be closed. A value of '0' indicates waiting forever. (integer value)
# Deprecated group/name - [eventlet_opts]/client_socket_timeout
# from .senlin_api.senlin.config.client_socket_timeout
{{ if not .senlin_api.senlin.config.client_socket_timeout }}#{{ end }}client_socket_timeout = {{ .senlin_api.senlin.config.client_socket_timeout | default "900" }}
# Maximum raw byte size of JSON request body. Should be larger than max_template_size. (integer value)
# Deprecated group/name - [DEFAULT]/max_json_body_size
# from .senlin_api.senlin.config.max_json_body_size
{{ if not .senlin_api.senlin.config.max_json_body_size }}#{{ end }}max_json_body_size = {{ .senlin_api.senlin.config.max_json_body_size | default "1048576" }}
[ssl]
#
# From oslo.service.sslutils
#
# CA certificate file to use to verify connecting clients. (string value)
# Deprecated group/name - [DEFAULT]/ssl_ca_file
# from .ssl.oslo.service.sslutils.ca_file
{{ if not .ssl.oslo.service.sslutils.ca_file }}#{{ end }}ca_file = {{ .ssl.oslo.service.sslutils.ca_file | default "<None>" }}
# Certificate file to use when starting the server securely. (string value)
# Deprecated group/name - [DEFAULT]/ssl_cert_file
# from .ssl.oslo.service.sslutils.cert_file
{{ if not .ssl.oslo.service.sslutils.cert_file }}#{{ end }}cert_file = {{ .ssl.oslo.service.sslutils.cert_file | default "<None>" }}
# Private key file to use when starting the server securely. (string value)
# Deprecated group/name - [DEFAULT]/ssl_key_file
# from .ssl.oslo.service.sslutils.key_file
{{ if not .ssl.oslo.service.sslutils.key_file }}#{{ end }}key_file = {{ .ssl.oslo.service.sslutils.key_file | default "<None>" }}
# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2
# may be available on some distributions. (string value)
# from .ssl.oslo.service.sslutils.version
{{ if not .ssl.oslo.service.sslutils.version }}#{{ end }}version = {{ .ssl.oslo.service.sslutils.version | default "<None>" }}
# Sets the list of available ciphers. value should be a string in the OpenSSL cipher list format. (string value)
# from .ssl.oslo.service.sslutils.ciphers
{{ if not .ssl.oslo.service.sslutils.ciphers }}#{{ end }}ciphers = {{ .ssl.oslo.service.sslutils.ciphers | default "<None>" }}
[webhook]
#
# From senlin.config
#
# Address for invoking webhooks. It is useful for cases where proxies are used for triggering webhooks. Default to the
# hostname of the API node. (string value)
# from .webhook.senlin.config.host
{{ if not .webhook.senlin.config.host }}#{{ end }}host = {{ .webhook.senlin.config.host | default "<None>" }}
# The port on which a webhook will be invoked. Useful when service is running behind a proxy. (port value)
# Minimum value: 0
# Maximum value: 65535
# from .webhook.senlin.config.port
{{ if not .webhook.senlin.config.port }}#{{ end }}port = {{ .webhook.senlin.config.port | default "8778" }}
[zaqar]
#
# From senlin.config
#
# Authentication type to load (string value)
# Deprecated group/name - [zaqar]/auth_plugin
# from .zaqar.senlin.config.auth_type
{{ if not .zaqar.senlin.config.auth_type }}#{{ end }}auth_type = {{ .zaqar.senlin.config.auth_type | default "<None>" }}
# Config Section from which to load plugin specific options (string value)
# from .zaqar.senlin.config.auth_section
{{ if not .zaqar.senlin.config.auth_section }}#{{ end }}auth_section = {{ .zaqar.senlin.config.auth_section | default "<None>" }}
# Authentication URL (string value)
# from .zaqar.senlin.config.auth_url
{{ if not .zaqar.senlin.config.auth_url }}#{{ end }}auth_url = {{ .zaqar.senlin.config.auth_url | default "<None>" }}
# Domain ID to scope to (string value)
# from .zaqar.senlin.config.domain_id
{{ if not .zaqar.senlin.config.domain_id }}#{{ end }}domain_id = {{ .zaqar.senlin.config.domain_id | default "<None>" }}
# Domain name to scope to (string value)
# from .zaqar.senlin.config.domain_name
{{ if not .zaqar.senlin.config.domain_name }}#{{ end }}domain_name = {{ .zaqar.senlin.config.domain_name | default "<None>" }}
# Project ID to scope to (string value)
# Deprecated group/name - [zaqar]/tenant-id
# from .zaqar.senlin.config.project_id
{{ if not .zaqar.senlin.config.project_id }}#{{ end }}project_id = {{ .zaqar.senlin.config.project_id | default "<None>" }}
# Project name to scope to (string value)
# Deprecated group/name - [zaqar]/tenant-name
# from .zaqar.senlin.config.project_name
{{ if not .zaqar.senlin.config.project_name }}#{{ end }}project_name = {{ .zaqar.senlin.config.project_name | default "<None>" }}
# Domain ID containing project (string value)
# from .zaqar.senlin.config.project_domain_id
{{ if not .zaqar.senlin.config.project_domain_id }}#{{ end }}project_domain_id = {{ .zaqar.senlin.config.project_domain_id | default "<None>" }}
# Domain name containing project (string value)
# from .zaqar.senlin.config.project_domain_name
{{ if not .zaqar.senlin.config.project_domain_name }}#{{ end }}project_domain_name = {{ .zaqar.senlin.config.project_domain_name | default "<None>" }}
# Trust ID (string value)
# from .zaqar.senlin.config.trust_id
{{ if not .zaqar.senlin.config.trust_id }}#{{ end }}trust_id = {{ .zaqar.senlin.config.trust_id | default "<None>" }}
# Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and
# ignored in v2 authentication. (string value)
# from .zaqar.senlin.config.default_domain_id
{{ if not .zaqar.senlin.config.default_domain_id }}#{{ end }}default_domain_id = {{ .zaqar.senlin.config.default_domain_id | default "<None>" }}
# Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3
# and ignored in v2 authentication. (string value)
# from .zaqar.senlin.config.default_domain_name
{{ if not .zaqar.senlin.config.default_domain_name }}#{{ end }}default_domain_name = {{ .zaqar.senlin.config.default_domain_name | default "<None>" }}
# User id (string value)
# from .zaqar.senlin.config.user_id
{{ if not .zaqar.senlin.config.user_id }}#{{ end }}user_id = {{ .zaqar.senlin.config.user_id | default "<None>" }}
# Username (string value)
# Deprecated group/name - [zaqar]/user-name
# from .zaqar.senlin.config.username
{{ if not .zaqar.senlin.config.username }}#{{ end }}username = {{ .zaqar.senlin.config.username | default "<None>" }}
# User's domain id (string value)
# from .zaqar.senlin.config.user_domain_id
{{ if not .zaqar.senlin.config.user_domain_id }}#{{ end }}user_domain_id = {{ .zaqar.senlin.config.user_domain_id | default "<None>" }}
# User's domain name (string value)
# from .zaqar.senlin.config.user_domain_name
{{ if not .zaqar.senlin.config.user_domain_name }}#{{ end }}user_domain_name = {{ .zaqar.senlin.config.user_domain_name | default "<None>" }}
# User's password (string value)
# from .zaqar.senlin.config.password
{{ if not .zaqar.senlin.config.password }}#{{ end }}password = {{ .zaqar.senlin.config.password | default "<None>" }}
{{- end -}}