openstack/openstack-manuals
Code Issues Proposed changes
4c2dd89e64
openstack-manuals/doc/install-guide/source/launch-instance-provider.rst

277 lines
11 KiB
ReStructuredText
Raw Normal View History

Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
.. _launch-instance-provider:
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
Launch an instance on the provider network
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
Determine instance options
--------------------------
To launch an instance, you must at least specify the flavor, image
name, network, security group, key, and instance name.
[install] Load demo-openrc.sh again Prior to gathering information for launching an instance, we should load the demo-openrc.sh file again to put the environment in a known state. Change-Id: I2bb36a4014fe934c30dbd43f2e07539d337fa3ce Implements: blueprint installguide-liberty
2015-10-06 17:49:19 -06:00
#. On the controller node, source the ``demo`` credentials to gain access to
user-only CLI commands:
.. code-block:: console
Install: Simplify OpenRC files Simplify OpenRC files by removing the '.sh' suffix and using '.' instead of 'source' to load them. Change-Id: Ic553ea10ac4f3958525c97bbda02ebe7d4bac24f Implements: bp installguide-mitaka
2016-03-15 18:46:07 -06:00
$ . demo-openrc
[install] Load demo-openrc.sh again Prior to gathering information for launching an instance, we should load the demo-openrc.sh file again to put the environment in a known state. Change-Id: I2bb36a4014fe934c30dbd43f2e07539d337fa3ce Implements: blueprint installguide-liberty
2015-10-06 17:49:19 -06:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
#. A flavor specifies a virtual resource allocation profile which
includes processor, memory, and storage.
List available flavors:
.. code-block:: console
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
$ openstack flavor list
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
[install] Fix the incorrect flavor name There is no flavor named "m1.tiny". Actually, "m1.nano" is created to be used to create CirrOS server. The patch fixes it. Change-Id: I74acb11122ec6da3c090a25bebc33e0b5e5aeb40 Closes-Bug: #1635465
2016-10-22 06:27:00 +00:00
+----+---------+-----+------+-----------+-------+-----------+
| ID | Name | RAM | Disk | Ephemeral | VCPUs | Is Public |
+----+---------+-----+------+-----------+-------+-----------+
| 0 | m1.nano | 64 | 1 | 0 | 1 | True |
+----+---------+-----+------+-----------+-------+-----------+
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
[install] Fix the incorrect flavor name There is no flavor named "m1.tiny". Actually, "m1.nano" is created to be used to create CirrOS server. The patch fixes it. Change-Id: I74acb11122ec6da3c090a25bebc33e0b5e5aeb40 Closes-Bug: #1635465
2016-10-22 06:27:00 +00:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
.. note::
You can also reference a flavor by ID.
#. List available images:
.. code-block:: console
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
$ openstack image list
[install] Correct and revise the command outputs Change-Id: Iae24fc10dd4ddd0cb145297e3a2ab4c9f3c1f99e Closes-Bug: #1636212
2016-10-24 13:46:07 +00:00
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
+--------------------------------------+--------+--------+
| ID | Name | Status |
+--------------------------------------+--------+--------+
| 390eb5f7-8d49-41ec-95b7-68c0d5d54b34 | cirros | active |
+--------------------------------------+--------+--------+
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Liberty updates for glance Update glance configuration for Liberty and address some consistency issues. Changes and testing specific to distribution packages primarily involve Ubuntu. Other distributions may require additional patches. Change-Id: I6c9696b28fe42f00b8a3f9d7344a9807b74accfb Implements: blueprint installguide-liberty
2015-09-30 17:37:43 -06:00
This instance uses the ``cirros`` image.
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
#. List available networks:
.. code-block:: console
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
$ openstack network list
[install] Correct and revise the command outputs Change-Id: Iae24fc10dd4ddd0cb145297e3a2ab4c9f3c1f99e Closes-Bug: #1636212
2016-10-24 13:46:07 +00:00
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
+--------------------------------------+--------------+--------------------------------------+
| ID | Name | Subnets |
+--------------------------------------+--------------+--------------------------------------+
| 4716ddfe-6e60-40e7-b2a8-42e57bf3c31c | selfservice | 2112d5eb-f9d6-45fd-906e-7cabd38b7c7c |
| b5b6993c-ddf9-40e7-91d0-86806a42edb8 | provider | 310911f6-acf0-4a47-824e-3032916582ff |
+--------------------------------------+--------------+--------------------------------------+
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
This instance uses the ``provider`` provider network. However, you must
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
reference this network using the ID instead of the name.
.. note::
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
If you chose option 2, the output should also contain the
``selfservice`` self-service network.
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
#. List available security groups:
.. code-block:: console
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
$ openstack security group list
[install] Correct and revise the command outputs Change-Id: Iae24fc10dd4ddd0cb145297e3a2ab4c9f3c1f99e Closes-Bug: #1636212
2016-10-24 13:46:07 +00:00
[install guide] Update openstack client command outputs Updated openstack client command outputs Change-Id: If178481970fd719c7779c40af4e14b61594f6b0f
2016-10-06 17:04:41 +11:00
+--------------------------------------+---------+------------------------+----------------------------------+
| ID | Name | Description | Project |
+--------------------------------------+---------+------------------------+----------------------------------+
| dd2b614c-3dad-48ed-958b-b155a3b38515 | default | Default security group | a516b957032844328896baa01e0f906c |
+--------------------------------------+---------+------------------------+----------------------------------+
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
This instance uses the ``default`` security group.
Launch the instance
-------------------
#. Launch the instance:
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
Replace ``PROVIDER_NET_ID`` with the ID of the ``provider`` provider
network.
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
.. note::
If you chose option 1 and your environment contains only one network,
you can omit the ``--nic`` option because OpenStack automatically
chooses the only network available.
.. code-block:: console
[install] Fix the incorrect flavor name There is no flavor named "m1.tiny". Actually, "m1.nano" is created to be used to create CirrOS server. The patch fixes it. Change-Id: I74acb11122ec6da3c090a25bebc33e0b5e5aeb40 Closes-Bug: #1635465
2016-10-22 06:27:00 +00:00
$ openstack server create --flavor m1.nano --image cirros \
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
--nic net-id=PROVIDER_NET_ID --security-group default \
--key-name mykey provider-instance
[install] Liberty updates for glance Update glance configuration for Liberty and address some consistency issues. Changes and testing specific to distribution packages primarily involve Ubuntu. Other distributions may require additional patches. Change-Id: I6c9696b28fe42f00b8a3f9d7344a9807b74accfb Implements: blueprint installguide-liberty
2015-09-30 17:37:43 -06:00
+--------------------------------------+-----------------------------------------------+
| Property | Value |
+--------------------------------------+-----------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | nova |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | hdF4LMQqC5PB |
| config_drive | |
| created | 2015-09-17T21:58:18Z |
[install] Fix the incorrect flavor name There is no flavor named "m1.tiny". Actually, "m1.nano" is created to be used to create CirrOS server. The patch fixes it. Change-Id: I74acb11122ec6da3c090a25bebc33e0b5e5aeb40 Closes-Bug: #1635465
2016-10-22 06:27:00 +00:00
| flavor | m1.nano |
[install] Liberty updates for glance Update glance configuration for Liberty and address some consistency issues. Changes and testing specific to distribution packages primarily involve Ubuntu. Other distributions may require additional patches. Change-Id: I6c9696b28fe42f00b8a3f9d7344a9807b74accfb Implements: blueprint installguide-liberty
2015-09-30 17:37:43 -06:00
| hostId | |
| id | 181c52ba-aebc-4c32-a97d-2e8e82e4eaaf |
| image | cirros (38047887-61a7-41ea-9b49-27987d5e8bb9) |
[install-guide]Fix the issue of the command's output Change-Id: I821b30e86add9250c0eb5bc3448f1ad6c7167448 Closes-Bug: #1530804
2016-01-04 18:38:31 +08:00
| key_name | mykey |
[install] Liberty updates for glance Update glance configuration for Liberty and address some consistency issues. Changes and testing specific to distribution packages primarily involve Ubuntu. Other distributions may require additional patches. Change-Id: I6c9696b28fe42f00b8a3f9d7344a9807b74accfb Implements: blueprint installguide-liberty
2015-09-30 17:37:43 -06:00
| metadata | {} |
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
| name | provider-instance |
[install] Liberty updates for glance Update glance configuration for Liberty and address some consistency issues. Changes and testing specific to distribution packages primarily involve Ubuntu. Other distributions may require additional patches. Change-Id: I6c9696b28fe42f00b8a3f9d7344a9807b74accfb Implements: blueprint installguide-liberty
2015-09-30 17:37:43 -06:00
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tenant_id | f5b2ccaa75ac413591f12fcaa096aa5c |
| updated | 2015-09-17T21:58:18Z |
| user_id | 684286a9079845359882afc3aa5011fb |
+--------------------------------------+-----------------------------------------------+
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
#. Check the status of your instance:
.. code-block:: console
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
$ openstack server list
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
[install] Correct and revise the command outputs Change-Id: Iae24fc10dd4ddd0cb145297e3a2ab4c9f3c1f99e Closes-Bug: #1636212
2016-10-24 13:46:07 +00:00
+--------------------------------------+-------------------+--------+------------------------+------------+
| ID | Name | Status | Networks | Image Name |
+--------------------------------------+-------------------+--------+------------------------+------------+
| 181c52ba-aebc-4c32-a97d-2e8e82e4eaaf | provider-instance | ACTIVE | provider=203.0.113.103 | cirros |
+--------------------------------------+-------------------+--------+------------------------+------------+
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
The status changes from ``BUILD`` to ``ACTIVE`` when the build process
successfully completes.
Access the instance using the virtual console
---------------------------------------------
#. Obtain a :term:`Virtual Network Computing (VNC)`
session URL for your instance and access it from a web browser:
.. code-block:: console
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
$ openstack console url show provider-instance
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
+-------+---------------------------------------------------------------------------------+
| Field | Value |
+-------+---------------------------------------------------------------------------------+
| type | novnc |
| url | http://controller:6080/vnc_auto.html?token=5eeccb47-525c-4918-ac2a-3ad1e9f1f493 |
+-------+---------------------------------------------------------------------------------+
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
.. note::
If your web browser runs on a host that cannot resolve the
``controller`` host name, you can replace ``controller`` with the
IP address of the management interface on your controller node.
The CirrOS image includes conventional user name/password
authentication and provides these credentials at the login prompt.
After logging into CirrOS, we recommend that you verify network
connectivity using ``ping``.
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
#. Verify access to the provider physical network gateway:
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
[install] cleanup list syntax * replace 1., 2., .. with #. where possible * replace a., b., .. with * * flatten some lists Change-Id: Icdae64a44fee7911022331081c07d717d797506e Implements: blueprint installguide-liberty
2015-10-08 12:24:39 +02:00
.. code-block:: console
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
[install] cleanup list syntax * replace 1., 2., .. with #. where possible * replace a., b., .. with * * flatten some lists Change-Id: Icdae64a44fee7911022331081c07d717d797506e Implements: blueprint installguide-liberty
2015-10-08 12:24:39 +02:00
$ ping -c 4 203.0.113.1
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
[install] cleanup list syntax * replace 1., 2., .. with #. where possible * replace a., b., .. with * * flatten some lists Change-Id: Icdae64a44fee7911022331081c07d717d797506e Implements: blueprint installguide-liberty
2015-10-08 12:24:39 +02:00
PING 203.0.113.1 (203.0.113.1) 56(84) bytes of data.
64 bytes from 203.0.113.1: icmp_req=1 ttl=64 time=0.357 ms
64 bytes from 203.0.113.1: icmp_req=2 ttl=64 time=0.473 ms
64 bytes from 203.0.113.1: icmp_req=3 ttl=64 time=0.504 ms
64 bytes from 203.0.113.1: icmp_req=4 ttl=64 time=0.470 ms
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
[install] cleanup list syntax * replace 1., 2., .. with #. where possible * replace a., b., .. with * * flatten some lists Change-Id: Icdae64a44fee7911022331081c07d717d797506e Implements: blueprint installguide-liberty
2015-10-08 12:24:39 +02:00
--- 203.0.113.1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2998ms
rtt min/avg/max/mdev = 0.357/0.451/0.504/0.055 ms
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] cleanup list syntax * replace 1., 2., .. with #. where possible * replace a., b., .. with * * flatten some lists Change-Id: Icdae64a44fee7911022331081c07d717d797506e Implements: blueprint installguide-liberty
2015-10-08 12:24:39 +02:00
#. Verify access to the internet:
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
[install] cleanup list syntax * replace 1., 2., .. with #. where possible * replace a., b., .. with * * flatten some lists Change-Id: Icdae64a44fee7911022331081c07d717d797506e Implements: blueprint installguide-liberty
2015-10-08 12:24:39 +02:00
.. code-block:: console
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
[install] cleanup list syntax * replace 1., 2., .. with #. where possible * replace a., b., .. with * * flatten some lists Change-Id: Icdae64a44fee7911022331081c07d717d797506e Implements: blueprint installguide-liberty
2015-10-08 12:24:39 +02:00
$ ping -c 4 openstack.org
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
[install] cleanup list syntax * replace 1., 2., .. with #. where possible * replace a., b., .. with * * flatten some lists Change-Id: Icdae64a44fee7911022331081c07d717d797506e Implements: blueprint installguide-liberty
2015-10-08 12:24:39 +02:00
PING openstack.org (174.143.194.225) 56(84) bytes of data.
64 bytes from 174.143.194.225: icmp_req=1 ttl=53 time=17.4 ms
64 bytes from 174.143.194.225: icmp_req=2 ttl=53 time=17.5 ms
64 bytes from 174.143.194.225: icmp_req=3 ttl=53 time=17.7 ms
64 bytes from 174.143.194.225: icmp_req=4 ttl=53 time=17.5 ms
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
[install] cleanup list syntax * replace 1., 2., .. with #. where possible * replace a., b., .. with * * flatten some lists Change-Id: Icdae64a44fee7911022331081c07d717d797506e Implements: blueprint installguide-liberty
2015-10-08 12:24:39 +02:00
--- openstack.org ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 17.431/17.575/17.734/0.143 ms
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
Access the instance remotely
----------------------------
#. Verify connectivity to the instance from the controller node or any host
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
on the provider physical network:
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
.. code-block:: console
$ ping -c 4 203.0.113.103
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
PING 203.0.113.103 (203.0.113.103) 56(84) bytes of data.
64 bytes from 203.0.113.103: icmp_req=1 ttl=63 time=3.18 ms
64 bytes from 203.0.113.103: icmp_req=2 ttl=63 time=0.981 ms
64 bytes from 203.0.113.103: icmp_req=3 ttl=63 time=1.06 ms
64 bytes from 203.0.113.103: icmp_req=4 ttl=63 time=0.929 ms
--- 203.0.113.103 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3002ms
rtt min/avg/max/mdev = 0.929/1.539/3.183/0.951 ms
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
#. Access your instance using SSH from the controller node or any
Install: Launch an instance updates for Mitaka Update launch an instance content for Mitaka. 1) Use OpenStack client if possible. 2) Change 'public' to 'provider' and 'private' to 'self-service' to improve distinction between these networks using neutronish terms. 3) Generally improve wording. Implements: bp installguide-mitaka Change-Id: I4833e03b3406823223ecb31e1a90c5d0d0357fe9
2016-02-25 15:22:51 -07:00
host on the provider physical network:
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
.. code-block:: console
$ ssh cirros@203.0.113.103
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
The authenticity of host '203.0.113.102 (203.0.113.102)' can't be established.
RSA key fingerprint is ed:05:e9:e7:52:a0:ff:83:68:94:c7:d1:f2:f8:e2:e9.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '203.0.113.102' (RSA) to the list of known hosts.
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
If your instance does not launch or seem to work as you expect, see the
Provide exact and direct link for 'instance does not launch' backport: mitaka Change-Id: I0e9d65895dcf0132a6c7be39731cae8f44e8418e
2016-04-30 14:24:16 +00:00
`Instance Boot Failures
[install] use https instead of http for docs.o.o Change-Id: Id1890a5b17ab31ea898677264de44e37a4da6a2f backport: newton
2017-01-27 23:18:14 +09:00
<https://docs.openstack.org/ops-guide/ops-maintenance-compute.html#instances>`__
Provide exact and direct link for 'instance does not launch' backport: mitaka Change-Id: I0e9d65895dcf0132a6c7be39731cae8f44e8418e
2016-04-30 14:24:16 +00:00
section in OpenStack Operations Guide for more information or use one of
[common] Use hyphens in filenames Part of "consistency-file-rename" spec [1] This commit also changes the following: * Update corresponding references to common in various guides * Rename excluded_patterns in conf.py of various guide * Rename existing entries in www/static/.htaccess * Add entries to .htaccess to redirect renamed files [1] http://specs.openstack.org/openstack/docs-specs/specs/newton/consistency-file-rename.html Change-Id: I39a9d5b95535cad1918ee64e95dee5ef18ab2cbe
2016-08-01 23:42:40 +09:00
the :doc:`many other options <common/app-support>`
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
to seek assistance. We want your first installation to work!
Return to :ref:`Launch an instance <launch-instance-complete>`.
Copy Permalink