openstack/openstack-manuals
Code Issues Proposed changes
ccd19216e5
openstack-manuals/doc/install-guide/source/launch-instance-cinder.rst

146 lines
5.1 KiB
ReStructuredText
Raw Normal View History

[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
.. _launch-instance-cinder:
Block Storage
~~~~~~~~~~~~~
Create a volume
---------------
#. Source the ``demo`` credentials to perform
the following steps as a non-administrative project:
.. code-block:: console
Install: Simplify OpenRC files Simplify OpenRC files by removing the '.sh' suffix and using '.' instead of 'source' to load them. Change-Id: Ic553ea10ac4f3958525c97bbda02ebe7d4bac24f Implements: bp installguide-mitaka
2016-03-15 18:46:07 -06:00
$ . demo-openrc
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
#. Create a 1 GB volume:
.. code-block:: console
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
$ openstack volume create --size 1 volume1
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
+---------------------+--------------------------------------+
| Field | Value |
+---------------------+--------------------------------------+
| attachments | [] |
| availability_zone | nova |
| bootable | false |
| consistencygroup_id | None |
| created_at | 2016-03-08T14:30:48.391027 |
| description | None |
| encrypted | False |
| id | a1e8be72-a395-4a6f-8e07-856a57c39524 |
| multiattach | False |
| name | volume1 |
| properties | |
| replication_status | disabled |
| size | 1 |
| snapshot_id | None |
| source_volid | None |
| status | creating |
| type | None |
| updated_at | None |
| user_id | 684286a9079845359882afc3aa5011fb |
+---------------------+--------------------------------------+
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
#. After a short time, the volume status should change from ``creating``
to ``available``:
.. code-block:: console
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
$ openstack volume list
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
+--------------------------------------+--------------+-----------+------+-------------+
| ID | Display Name | Status | Size | Attached to |
+--------------------------------------+--------------+-----------+------+-------------+
| a1e8be72-a395-4a6f-8e07-856a57c39524 | volume1 | available | 1 | |
+--------------------------------------+--------------+-----------+------+-------------+
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
Attach the volume to an instance
--------------------------------
#. Attach a volume to an instance:
.. code-block:: console
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
$ openstack server add volume INSTANCE_NAME VOLUME_NAME
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
Replace ``INSTANCE_NAME`` with the name of the instance and ``VOLUME_NAME``
with the name of the volume you want to attach to it.
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
**Example**
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
Attach the ``volume1`` volume to the ``provider-instance`` instance:
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
.. code-block:: console
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
$ openstack server add volume provider-instance volume1
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
.. note::
This command provides no output.
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
#. List volumes:
.. code-block:: console
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
$ openstack volume list
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
Install: Cinder updates for Mitaka Update cinder content for Mitaka. 1) Remove explicit installation of some packages due to dependency fixes. 2) Change glance configuration. 3) Remove explicit configuration of verbosity. 4) Use the OpenStack client if possible. Change-Id: I6aeec79b6ebda7605b3e812b1b34af45aa7fcc5a Implements: bp installguide-mitaka
2016-03-07 17:27:53 -07:00
+--------------------------------------+--------------+--------+------+--------------------------------------------+
| ID | Display Name | Status | Size | Attached to |
+--------------------------------------+--------------+--------+------+--------------------------------------------+
| a1e8be72-a395-4a6f-8e07-856a57c39524 | volume1 | in-use | 1 | Attached to provider-instance on /dev/vdb |
+--------------------------------------+--------------+--------+------+--------------------------------------------+
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
#. Access your instance using SSH and use the ``fdisk`` command to verify
presence of the volume as the ``/dev/vdb`` block storage device:
.. code-block:: console
$ sudo fdisk -l
Disk /dev/vda: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders, total 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/vda1 * 16065 2088449 1036192+ 83 Linux
Disk /dev/vdb: 1073 MB, 1073741824 bytes
16 heads, 63 sectors/track, 2080 cylinders, total 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/vdb doesn't contain a valid partition table
install: Updates syntax for training labs parser. Training labs parser will allow us to automatically parse RST code to BASH. This BASH code in turn will be invoked by install-guides for validating the install guides. To provide the correct information to the parser for generating BASH code, there are a few changes required to the RST syntax. Introduces the following changes to RST syntax: - `.. end` This tag provides information for the parser to stop extracting the given block which could be code, file injection or configuration file edit. - `.. endonly` This tag provides information for the parser with the correct distro-switch logic for identifying distro-specific code. For .. only:: tags, it is better to avoid nesting. If nesting is not avoidable then it is preferable to add the .. endonly tag to close the outer block immediately. - Extra new lines in code-blocks Some commands in the code-blocks provides the expected output of the given command. This is not a BASH command which we want to run but rather some visual niceness for the users. These new lines provides the parser information to identify the end of the command. This basic logic would be something similar to find '\r\n' which at least for python means new empty line. - `mysql>` Introducing this operator for mysql commands. This could potentially be changed to `pgsql>` or similar for other SQL type databases. This allows the parser to identify mysql commands and then run them in mysql instead of in 'sh' or 'bash'. - `.. path` Introducing this tag to provide the parser with the information with the path of the configuration file. Using the description text for the same is not reliable since the description text may not be consistent. This commit should ideally introduce all the syntax changes required for the parser to convert the code-blocks in here to BASH code. These changes should have no impact on the HTML output of the RST code. Change-Id: I47830b1bc61c8b1a0f3350932d15aa3ce88fa672
2016-08-24 02:46:17 +02:00
.. end
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
.. note::
[install] Liberty updates for cinder Update cinder configuration for Liberty. Includes moving basic host configuration of the block storage node to environment section. Also addresses some consistency issues, mostly from the RST conversion. Changes and testing specific to distribution packages primarily involve Ubuntu. Other distributions may require additional patches. Change-Id: I8915bc5fad5d278fd73899476bf6d90970d18564 Implements: bp installguide-liberty
2015-10-12 11:06:28 -06:00
You must create a file system on the device and mount it
to use the volume.
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
For more information about how to manage volumes, see the
Correct the not accurate link This patch provide the exact link for 'how to manage volumes' in 'OpenStack User Guide'. Change-Id: I5ff6b82d6fd0ec378e15ebe943e7ec5ec3144501
2016-04-30 13:51:12 +00:00
`Manage volumes
[install] use https instead of http for docs.o.o Change-Id: Id1890a5b17ab31ea898677264de44e37a4da6a2f backport: newton
2017-01-27 23:18:14 +09:00
<https://docs.openstack.org/user-guide/common/cli-manage-volumes.html>`__
Correct the not accurate link This patch provide the exact link for 'how to manage volumes' in 'OpenStack User Guide'. Change-Id: I5ff6b82d6fd0ec378e15ebe943e7ec5ec3144501
2016-04-30 13:51:12 +00:00
in OpenStack End User Guide.
[install] Initial networking architecture changes Implement initial networking architecture changes for Liberty as follows: 1) Remove nova-network. 2) Develop architecture for provider networks with Linux bridge agent. 3) Develop architecture for self-service networks with Linux bridge agent. 4) Munge the neutron controller and network node configuration together. 5) Rejigger neutron to use the Linux bridge agent. 6) Restructure launch an instance content to account for two networking options. 7) Other restructuring as necessary to meet the primary goal. For simplicity, both architectures require only two nodes, each with two network interfaces, to deploy core OpenStack services. Also, to address recurring issues about the lack of support for connecting instances directly to the public/external network, the self-service architecture augments the provider networks architecture which allows connection to both private and public networks. Change-Id: Ie3ab9a15ebfe82c0ce54f709c87a66d7cc46db3f Implements: blueprint installguide-liberty
2015-09-08 13:38:37 -05:00
Return to :ref:`launch-instance`.
Copy Permalink