openstack/openstack-manuals
Code Issues Proposed changes

[config-ref] small corrections in emc-xtremio-driver

Browse Source 
Implements: blueprint config-ref-rst
Change-Id: I7ca75b89784d98d6014066606e9c52ef438ea5ce
This commit is contained in:
venkatamahesh 2015-12-12 15:07:01 +05:30
parent f2ae3328f8
commit 104c184ff9
1 changed files with 11 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
doc/config-ref-rst/source/block-storage/drivers/emc-xtremio-driver.rst
View File

@ -6,24 +6,31 @@ The high performance XtremIO All Flash Array (AFA) offers Block Storage
services to OpenStack. Using the driver, OpenStack Block Storage hosts
can connect to an XtremIO Storage cluster.
This section explains how to configure and connect an OpenStack block
storage host to an XtremIO storage cluster.
This section explains how to configure and connect the block
storage nodes to an XtremIO storage cluster.
Support matrix
~~~~~~~~~~~~~~
Xtremapp version 3.0 and 4.0 are supported.
XtremApp version 3.0 and 4.0 are supported.
Supported operations
~~~~~~~~~~~~~~~~~~~~
- Create, delete, clone, attach, and detach volumes.
- Create and delete volume snapshots.
- Create a volume from a snapshot.
- Copy an image to a volume.
- Copy a volume to an image.
- Extend a volume.
- Manage and unmanage a volume.
- Get volume statistics.
XtremIO Block Storage driver configuration
@ -74,7 +81,7 @@ In XtremIO version 4.0, a single XMS can manage multiple cluster back ends. In
such setups, the administrator is required to specify the cluster name (in
addition to the XMS IP). Each cluster must be defined as a separate back end.
To retrieve the Cluster Name, run the :command:`show-clusters` CLI command.
To retrieve the cluster name, run the :command:`show-clusters` CLI command.
Configure the cluster name by adding the following parameter: