openstack/openstack-manuals
Code Issues Proposed changes

[config-ref] Fix minor issues with IBM FlashSystem

Browse Source 
Fixes some minor formatting issues with the IBM FlashSystem volume
driver RST conversion.

Change-Id: Ie99b48ff8b20fa6e53c4c65d1c9602f0e7e12469
Implements: blueprint config-ref-rst
This commit is contained in:
John Davidge 2015-12-10 15:58:53 -08:00
parent 938325d847
commit 9b5502664b
1 changed files with 12 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
doc/config-ref-rst/source/block-storage/drivers/ibm-flashsystem-volume-driver.rst
View File

@ -47,12 +47,12 @@ Data Path configuration
Using Fiber Channel (FC), each FlashSystem node should have at least one
WWPN port configured. If the ``flashsystem_multipath_enabled`` flag is
set to ``True`` in the Cinder configuration file, the driver uses all
available WWPNs to attach the volume to the instance. If the flag is not set,
the driver uses the WWPN associated with the volume's preferred node (if
available). Otherwise, it uses the first available WWPN of the system.
The driver obtains the WWPNs directly from the storage system. You do
not need to provide these WWPNs to the driver.
set to ``True`` in the Block Storage service configuration file, the driver
uses all available WWPNs to attach the volume to the instance. If the flag is
not set, the driver uses the WWPN associated with the volume's preferred node
(if available). Otherwise, it uses the first available WWPN of the system. The
driver obtains the WWPNs directly from the storage system. You do not need to
provide these WWPNs to the driver.
.. note::
@ -108,7 +108,7 @@ To enable the IBM FlashSystem FC driver, configure the following options in the
- Enable multipath for FC connections
* - ``flashsystem_multihost_enabled``
- Optional
- True
- ``True``
- Enable mapping vdisks to multiple hosts [1]_
.. [1]
@ -181,7 +181,7 @@ in the ``cinder.conf`` configuration file:
- Connection protocol should be set to ``iSCSI``
* - ``flashsystem_multihost_enabled``
- Optional
- True
- ``True``
- Enable mapping vdisks to multiple hosts [2]_
* - ``iscsi_ip_address``
- Required
@ -190,7 +190,7 @@ in the ``cinder.conf`` configuration file:
* - ``flashsystem_iscsi_portid``
- Required
-
- Set to the id of the iscsi_ip_address obtained by FlashSystem GUI or CLI [4]_
- Set to the id of the ``iscsi_ip_address`` obtained by FlashSystem GUI or CLI [4]_
.. [2]
This option allows the driver to map a vdisk to more than one host at
@ -201,7 +201,7 @@ in the ``cinder.conf`` configuration file:
``False`` will provide added safety.
.. [3]
On the cluster of the FlashSystem, the iSCSI IP address column is the
On the cluster of the FlashSystem, the ``iscsi_ip_address`` column is the
seventh column ``IP_address`` of the output of ``lsportip``.
.. [4]
@ -209,8 +209,8 @@ in the ``cinder.conf`` configuration file:
column ``id`` of the output of ``lsportip``,
not the sixth column ``port_id``.
Limitation and known issues
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Limitations and known issues
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
IBM FlashSystem only works when: