[admin-guide] Update links to newton

Change-Id: Id40467c27f18622f1c0849cefaacf7829dc8f13f
This commit is contained in:
chenxing 2016-09-29 08:11:01 +00:00 committed by Olena Logvinova
parent ffec085a7b
commit d10f645e00
29 changed files with 61 additions and 72 deletions

View File

@ -49,7 +49,7 @@ To enable the Networking service ML2 driver, edit the
param_3 = ... param_3 = ...
For more details, see For more details, see
`Networking service mechanism drivers <http://docs.openstack.org/mitaka/networking-guide/config-ml2-plug-in.html#mechanism-drivers>`__. `Networking service mechanism drivers <http://docs.openstack.org/newton/networking-guide/config-ml2.html#mechanism-drivers>`__.
Configure Bare Metal service Configure Bare Metal service
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

View File

@ -25,7 +25,7 @@ These workflows are possible for a migration:
.. note:: .. note::
While most back ends support this function, not all do. See the `driver While most back ends support this function, not all do. See the `driver
documentation <http://docs.openstack.org/mitaka/config-reference/block-storage/volume-drivers.html>`__ documentation <http://docs.openstack.org/newton/config-reference/block-storage/volume-drivers.html>`__
in the OpenStack Configuration Reference for more details. in the OpenStack Configuration Reference for more details.
#. If the volume is attached to a VM instance, the Block Storage creates a #. If the volume is attached to a VM instance, the Block Storage creates a

View File

@ -96,7 +96,7 @@ service quotas.
update the property in the :guilabel:`cinder.quota` update the property in the :guilabel:`cinder.quota`
section of the ``/etc/cinder/cinder.conf`` file. section of the ``/etc/cinder/cinder.conf`` file.
For more information, see the `Block Storage service For more information, see the `Block Storage service
<http://docs.openstack.org/mitaka/config-reference/block-storage.html>`_ <http://docs.openstack.org/newton/config-reference/block-storage.html>`_
in OpenStack Configuration Reference. in OpenStack Configuration Reference.
#. To update Block Storage service quotas for an existing project #. To update Block Storage service quotas for an existing project

View File

@ -72,7 +72,7 @@ availability zones. Compute supports the following hypervisors:
- `Xen <http://www.xen.org/support/documentation.html>`__ - `Xen <http://www.xen.org/support/documentation.html>`__
For more information about hypervisors, see the For more information about hypervisors, see the
`Hypervisors <http://docs.openstack.org/mitaka/config-reference/compute/hypervisors.html>`__ `Hypervisors <http://docs.openstack.org/newton/config-reference/compute/hypervisors.html>`__
section in the OpenStack Configuration Reference. section in the OpenStack Configuration Reference.
Projects, users, and roles Projects, users, and roles
@ -178,7 +178,7 @@ to keep ephemeral storage, depending on the flavor selected. In this
case, the root file system can be on the persistent volume, and its case, the root file system can be on the persistent volume, and its
state is maintained, even if the instance is shut down. For more state is maintained, even if the instance is shut down. For more
information about this type of configuration, see `Introduction to the information about this type of configuration, see `Introduction to the
Block Storage service <http://docs.openstack.org/mitaka/config-reference/block-storage/block-storage-overview.html>`_ Block Storage service <http://docs.openstack.org/newton/config-reference/block-storage/block-storage-overview.html>`_
in the OpenStack Configuration Reference. in the OpenStack Configuration Reference.
.. note:: .. note::

View File

@ -306,7 +306,7 @@ For more information about image metadata, refer to the `Image metadata`_
guide. guide.
.. Links .. Links
.. _`Scheduling`: http://docs.openstack.org/mitaka/config-reference/compute/scheduler.html .. _`Scheduling`: http://docs.openstack.org/newton/config-reference/compute/scheduler.html
.. _`Flavors`: http://docs.openstack.org/admin-guide/compute-flavors.html .. _`Flavors`: http://docs.openstack.org/admin-guide/compute-flavors.html
.. _`Image metadata`: http://docs.openstack.org/image-guide/image-metadata.html .. _`Image metadata`: http://docs.openstack.org/image-guide/image-metadata.html
.. _`discussion`: http://lists.openstack.org/pipermail/openstack-dev/2016-March/090367.html .. _`discussion`: http://lists.openstack.org/pipermail/openstack-dev/2016-March/090367.html

View File

@ -522,6 +522,6 @@ PCI passthrough
- ALIAS: (string) The alias which correspond to a particular PCI device - ALIAS: (string) The alias which correspond to a particular PCI device
class as configured in the nova configuration file (see `nova.conf class as configured in the nova configuration file (see `nova.conf
configuration options <http://docs.openstack.org/mitaka/config-reference/compute/config-options.html>`_). configuration options <http://docs.openstack.org/newton/config-reference/compute/config-options.html>`_).
- COUNT: (integer) The amount of PCI devices of type ALIAS to be assigned - COUNT: (integer) The amount of PCI devices of type ALIAS to be assigned
to a guest. to a guest.

View File

@ -31,7 +31,7 @@ flavors that you can edit or add to.
- For more information about image configuration options, see the - For more information about image configuration options, see the
`Image services `Image services
<http://docs.openstack.org/mitaka/config-reference/image-service.html>`__ <http://docs.openstack.org/newton/config-reference/image.html>`__
section of the OpenStack Configuration Reference. section of the OpenStack Configuration Reference.
- For more information about flavors, see :ref:`compute-flavors`. - For more information about flavors, see :ref:`compute-flavors`.
@ -268,7 +268,7 @@ can also be used to set policies for Image service actions.
To view a sample configuration file, see To view a sample configuration file, see
`glance-api.conf `glance-api.conf
<http://docs.openstack.org/mitaka/config-reference/image-service/sample-configuration-files.html#glance-api-conf>`__. <http://docs.openstack.org/newton/config-reference/image/glance-api.conf.html>`__.
#. Optionally, in the ``glance-api.conf`` file, specify whether roles or #. Optionally, in the ``glance-api.conf`` file, specify whether roles or
policies are used in the property protections configuration file policies are used in the property protections configuration file
@ -281,7 +281,7 @@ can also be used to set policies for Image service actions.
To view a sample configuration file, see To view a sample configuration file, see
`glance-api.conf `glance-api.conf
<http://docs.openstack.org/mitaka/config-reference/image-service/sample-configuration-files.html#glance-api-conf>`__. <http://docs.openstack.org/newton/config-reference/image/glance-api.conf.html>`__.
Image download: how it works Image download: how it works
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@ -317,7 +317,7 @@ Compute nodes also implement caching of images, meaning that if an image
has been used before it won't necessarily be downloaded every time. has been used before it won't necessarily be downloaded every time.
Information on the configuration options for caching on compute nodes Information on the configuration options for caching on compute nodes
can be found in the `Configuration can be found in the `Configuration
Reference <http://docs.openstack.org/mitaka/config-reference/>`__. Reference <http://docs.openstack.org/newton/config-reference/>`__.
Instance building blocks Instance building blocks
~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~
@ -414,7 +414,7 @@ Control where instances run
~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
The `Scheduling section The `Scheduling section
<http://docs.openstack.org/mitaka/config-reference/compute/scheduler.html>`__ <http://docs.openstack.org/newton/config-reference/compute/scheduler.html>`__
of OpenStack Configuration Reference of OpenStack Configuration Reference
provides detailed information on controlling where your instances run, provides detailed information on controlling where your instances run,
including ensuring a set of instances run on different compute nodes for including ensuring a set of instances run on different compute nodes for

View File

@ -16,7 +16,7 @@ Before starting a migration, review the Configure migrations section.
under the default Compute configuration options, the instances under the default Compute configuration options, the instances
are suspended before migration. For more information, see are suspended before migration. For more information, see
`Configure migrations `Configure migrations
<http://docs.openstack.org/mitaka/config-reference/compute/config-options.html>`_. <http://docs.openstack.org/newton/config-reference/compute/config-options.html>`_.
in the OpenStack Configuration Reference. in the OpenStack Configuration Reference.
**Migrating instances** **Migrating instances**

View File

@ -39,7 +39,7 @@ For more about the logging configuration syntax, including the
on logging configuration files. on logging configuration files.
For an example of the ``logging.conf`` file with various defined handlers, see For an example of the ``logging.conf`` file with various defined handlers, see
the `OpenStack Configuration Reference <http://docs.openstack.org/mitaka/config-reference/>`__. the `OpenStack Configuration Reference <http://docs.openstack.org/newton/config-reference/>`__.
Syslog Syslog
~~~~~~ ~~~~~~

View File

@ -195,7 +195,7 @@ configuration file. Specify the configuration file using the
For more information about creating a dnsmasq configuration file, see For more information about creating a dnsmasq configuration file, see
the `OpenStack Configuration the `OpenStack Configuration
Reference <http://docs.openstack.org/mitaka/config-reference/>`__, Reference <http://docs.openstack.org/newton/config-reference/>`__,
and `the dnsmasq and `the dnsmasq
documentation <http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq.conf.example>`__. documentation <http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq.conf.example>`__.

View File

@ -140,8 +140,8 @@ the ``pci_alias`` from the flavor.
# openstack server create --flavor m1.large --image cirros-0.3.4-x86_64-uec --wait test-pci # openstack server create --flavor m1.large --image cirros-0.3.4-x86_64-uec --wait test-pci
.. Links .. Links
.. _`Create Virtual Functions`: http://docs.openstack.org/mitaka/networking-guide/adv-config-sriov.html#create-virtual-functions-compute .. _`Create Virtual Functions`: http://docs.openstack.org/newton/networking-guide/config-sriov.html#create-virtual-functions-compute
.. _`Configure nova-scheduler`: http://docs.openstack.org/mitaka/networking-guide/adv-config-sriov.html#configure-nova-scheduler-controller .. _`Configure nova-scheduler`: http://docs.openstack.org/newton/networking-guide/config-sriov.html#configure-nova-scheduler-controller
.. _`nova.conf configuration options`: http://docs.openstack.org/mitaka/config-reference/compute/config-options.html .. _`nova.conf configuration options`: http://docs.openstack.org/newton/config-reference/compute/config-options.html
.. _`flavor`: http://docs.openstack.org/admin-guide/compute-flavors.html .. _`flavor`: http://docs.openstack.org/admin-guide/compute-flavors.html
.. _`Networking Guide`: http://docs.openstack.org/mitaka/networking-guide/adv-config-sriov.html .. _`Networking Guide`: http://docs.openstack.org/newton/networking-guide/config-sriov.html

View File

@ -11,7 +11,7 @@ multiple aggregates.
The scheduler uses this information to make scheduling decisions. The scheduler uses this information to make scheduling decisions.
For information, see For information, see
`Scheduling <http://docs.openstack.org/mitaka/config-reference/compute/scheduler.html>`__. `Scheduling <http://docs.openstack.org/newton/config-reference/compute/scheduler.html>`__.
To create a host aggregate To create a host aggregate
~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

View File

@ -23,7 +23,7 @@ configuration, patching, backups, restores, and monitoring.
You can modify various cluster characteristics by editing the You can modify various cluster characteristics by editing the
``/etc/trove/trove.conf`` file. A comprehensive list of the Database ``/etc/trove/trove.conf`` file. A comprehensive list of the Database
service configuration options is described in the `Database service service configuration options is described in the `Database service
<http://docs.openstack.org/mitaka/config-reference/database-service.html>`_ <http://docs.openstack.org/newton/config-reference/database.html>`_
chapter in the *Configuration Reference*. chapter in the *Configuration Reference*.
Create a data store Create a data store

View File

@ -180,7 +180,7 @@ routers can connect multiple L2 Networking networks and can also provide
a gateway that connects one or more private L2 networks to a shared a gateway that connects one or more private L2 networks to a shared
external network. For example, a public network for access to the external network. For example, a public network for access to the
Internet. See the `OpenStack Configuration Reference <http://docs. Internet. See the `OpenStack Configuration Reference <http://docs.
openstack.org/mitaka/config-reference/>`_ for details on common openstack.org/newton/config-reference/>`_ for details on common
models of deploying Networking L3 routers. models of deploying Networking L3 routers.
The L3 router provides basic NAT capabilities on gateway ports that The L3 router provides basic NAT capabilities on gateway ports that

View File

@ -122,7 +122,7 @@ service, or no longer needed.
This feature applies to all plug-ins that support DHCP scaling. For more This feature applies to all plug-ins that support DHCP scaling. For more
information, see the `DHCP agent configuration information, see the `DHCP agent configuration
options <http://docs.openstack.org/mitaka/config-reference/networking/networking_options_reference.html#dhcp-agent>`__ options <http://docs.openstack.org/newton/config-reference/networking/networking_options_reference.html#dhcp-agent>`__
listed in the OpenStack Configuration Reference. listed in the OpenStack Configuration Reference.
DHCP agent setup: OVS plug-in DHCP agent setup: OVS plug-in
@ -404,7 +404,7 @@ Configure Hyper-V L2 agent
Before you install the OpenStack Networking Hyper-V L2 agent on a Before you install the OpenStack Networking Hyper-V L2 agent on a
Hyper-V compute node, ensure the compute node has been configured Hyper-V compute node, ensure the compute node has been configured
correctly using these correctly using these
`instructions <http://docs.openstack.org/mitaka/config-reference/compute/hypervisor-hyper-v.html>`__. `instructions <http://docs.openstack.org/newton/config-reference/compute/hypervisor-hyper-v.html>`__.
**To install the OpenStack Networking Hyper-V agent and configure the node** **To install the OpenStack Networking Hyper-V agent and configure the node**
@ -430,7 +430,7 @@ correctly using these
#. Create the ``C:\etc\neutron-hyperv-agent.conf`` file and add the proper #. Create the ``C:\etc\neutron-hyperv-agent.conf`` file and add the proper
configuration options and the `Hyper-V related configuration options and the `Hyper-V related
options <http://docs.openstack.org/mitaka/config-reference/networking/networking_options_reference.html#cloudbase-hyper-v-agent-configuration-options>`__. Here is a sample config file: options <http://docs.openstack.org/newton/config-reference/networking/networking_options_reference.html#cloudbase-hyper-v-agent-configuration-options>`__. Here is a sample config file:
.. code-block:: ini .. code-block:: ini

View File

@ -3,7 +3,7 @@ Plug-in configurations
====================== ======================
For configurations options, see `Networking configuration For configurations options, see `Networking configuration
options <http://docs.openstack.org/mitaka/config-reference/networking/networking_options_reference.html>`__ options <http://docs.openstack.org/newton/config-reference/networking/networking_options_reference.html>`__
in Configuration Reference. These sections explain how to configure in Configuration Reference. These sections explain how to configure
specific plug-ins. specific plug-ins.
@ -31,7 +31,7 @@ Configure Big Switch (Floodlight REST Proxy) plug-in
server = CONTROLLER_IP:PORT server = CONTROLLER_IP:PORT
For database configuration, see `Install Networking For database configuration, see `Install Networking
Services <http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-controller-install.html>`__ Services <http://docs.openstack.org/newton/install-guide-ubuntu/neutron-controller-install.html>`__
in the Installation Guide in the `OpenStack Documentation in the Installation Guide in the `OpenStack Documentation
index <http://docs.openstack.org>`__. (The link defaults to the Ubuntu index <http://docs.openstack.org>`__. (The link defaults to the Ubuntu
version.) version.)
@ -78,7 +78,7 @@ Configure Brocade plug-in
ostype = NOS ostype = NOS
For database configuration, see `Install Networking For database configuration, see `Install Networking
Services <http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-controller-install.html>`__ Services <http://docs.openstack.org/newton/install-guide-ubuntu/neutron-controller-install.html>`__
in any of the Installation Guides in the `OpenStack Documentation in any of the Installation Guides in the `OpenStack Documentation
index <http://docs.openstack.org>`__. (The link defaults to the Ubuntu index <http://docs.openstack.org>`__. (The link defaults to the Ubuntu
version.) version.)
@ -174,7 +174,7 @@ formerly known as Nicira NVP.
NEUTRON_PLUGIN_CONFIG = /etc/neutron/plugins/vmware/nsx.ini NEUTRON_PLUGIN_CONFIG = /etc/neutron/plugins/vmware/nsx.ini
For database configuration, see `Install Networking For database configuration, see `Install Networking
Services <http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-controller-install.html>`__ Services <http://docs.openstack.org/newton/install-guide-ubuntu/neutron-controller-install.html>`__
in the Installation Guide. in the Installation Guide.
#. Restart ``neutron-server`` to apply settings: #. Restart ``neutron-server`` to apply settings:
@ -237,7 +237,7 @@ Configure PLUMgrid plug-in
password = "PLUMgrid-director-admin-password" password = "PLUMgrid-director-admin-password"
For database configuration, see `Install Networking For database configuration, see `Install Networking
Services <http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-controller-install.html>`__ Services <http://docs.openstack.org/newton/install-guide-ubuntu/neutron-controller-install.html>`__
in the Installation Guide. in the Installation Guide.
#. Restart the ``neutron-server`` service to apply the settings: #. Restart the ``neutron-server`` service to apply the settings:

View File

@ -3,4 +3,4 @@ Scalable and highly available DHCP agents
========================================= =========================================
This section is fully described in the `Networking Guide This section is fully described in the `Networking Guide
<http://docs.openstack.org/mitaka/networking-guide/misc-add-ha-for-dhcp.html>`_. <http://docs.openstack.org/newton/networking-guide/config-dhcp-ha.html>`_.

View File

@ -7,5 +7,5 @@ administer your storage solution. The majority of the administration
information is maintained in developer documentation at information is maintained in developer documentation at
`docs.openstack.org/developer/swift/ <http://docs.openstack.org/developer/swift/>`__. `docs.openstack.org/developer/swift/ <http://docs.openstack.org/developer/swift/>`__.
See the `OpenStack Configuration Reference <http://docs.openstack.org/mitaka/config-reference/object-storage.html>`__ See the `OpenStack Configuration Reference <http://docs.openstack.org/newton/config-reference/object-storage.html>`__
for a list of configuration options for Object Storage. for a list of configuration options for Object Storage.

View File

@ -49,7 +49,7 @@ take over.
For more information concerning proxy server configuration, see For more information concerning proxy server configuration, see
`Configuration Reference `Configuration Reference
<http://docs.openstack.org/mitaka/config-reference/object-storage/configure.html#proxy-server-configuration>`_. <http://docs.openstack.org/newton/config-reference/object-storage/proxy-server.html>`_.
Rings Rings
----- -----

View File

@ -134,7 +134,7 @@ separate networks. The service network is reachable from the host where the
``manila-share`` service is running. The share export IP is from a network that ``manila-share`` service is running. The share export IP is from a network that
allows user access. allows user access.
See `Configuring the ZFSonLinux driver <http://docs.openstack.org/mitaka/config-reference/shared-file-systems/drivers/zfs-on-linux-driver.html>`_ See `Configuring the ZFSonLinux driver <http://docs.openstack.org/newton/config-reference/shared-file-systems/drivers/zfs-on-linux-driver.html>`_
for information on how to set up the ZFSonLinux driver. for information on how to set up the ZFSonLinux driver.

View File

@ -116,7 +116,7 @@ information about this approach, see the section called
To use this workload partitioning solution set the To use this workload partitioning solution set the
``evaluation_service`` option to ``default``. For more ``evaluation_service`` option to ``default``. For more
information, see the alarm section in the information, see the alarm section in the
`OpenStack Configuration Reference <http://docs.openstack.org/mitaka/config-reference/telemetry.html>`_. `OpenStack Configuration Reference <http://docs.openstack.org/newton/config-reference/telemetry.html>`_.
Using alarms Using alarms
~~~~~~~~~~~~ ~~~~~~~~~~~~

View File

@ -88,7 +88,7 @@ types by each OpenStack service that Telemetry transforms into samples.
image.send image.send
- The required configuration for Image service can be * - service found in - The required configuration for Image service can be * - service found in
`Configure the Image service for Telemetry section <http://docs.openstack.org/mitaka/install-guide-ubuntu/ceilometer-glance.html>`__ `Configure the Image service for Telemetry <http://docs.openstack.org/project-install-guide/telemetry/newton>`__
section in the OpenStack Installation Guide section in the OpenStack Installation Guide
* - OpenStack Networking * - OpenStack Networking
- floatingip.create.end - floatingip.create.end
@ -171,8 +171,8 @@ types by each OpenStack service that Telemetry transforms into samples.
volume.backup.restore.\ volume.backup.restore.\
\* \*
- The required configuration for Block Storage service can be found in the - The required configuration for Block Storage service can be found in the
`Add the Block Storage service agent for Telemetry section <http://docs.openstack.org/mitaka/install-guide-ubuntu//ceilometer-cinder.html>`__ `Add the Block Storage service agent for Telemetry section <http://docs.openstack.org/project-install-guide/telemetry/newton/configure_services/cinder/install-cinder-ubuntu.html>`__
section in the OpenStack Installation Guide. in the OpenStack Installation Guide.
.. note:: .. note::
@ -186,8 +186,8 @@ administrators and users. Configuring ``nova_notifications`` in the
``nova.conf`` file allows administrators to respond to events ``nova.conf`` file allows administrators to respond to events
rapidly. For more information on configuring notifications for the rapidly. For more information on configuring notifications for the
compute service, see compute service, see
`Telemetry services <http://docs.openstack.org/ `Telemetry services <http://docs.openstack.org/project-install-guide/
mitaka/install-guide-ubuntu/ceilometer-nova.html>`__ in the telemetry/newton/configure_services/nova/install-nova-ubuntu.html>`__ in the
OpenStack Installation Guide. OpenStack Installation Guide.
.. note:: .. note::
@ -209,7 +209,8 @@ information locally.
A Compute agent instance has to be installed on each and every compute A Compute agent instance has to be installed on each and every compute
node, installation instructions can be found in the `Install the Compute node, installation instructions can be found in the `Install the Compute
agent for Telemetry agent for Telemetry
<http://docs.openstack.org/mitaka/install-guide-ubuntu/ceilometer-nova.html>`__ <http://docs.openstack.org/project-install-guide/
telemetry/newton/configure_services/nova/install-nova-ubuntu.html>`__
section in the OpenStack Installation Guide. section in the OpenStack Installation Guide.
Just like the central agent, this component also does not need a direct Just like the central agent, this component also does not need a direct
@ -241,7 +242,8 @@ meters are listed in :ref:`telemetry-object-storage-meter`, marked with
The instructions on how to install this middleware can be found in The instructions on how to install this middleware can be found in
`Configure the Object Storage service for Telemetry `Configure the Object Storage service for Telemetry
<http://docs.openstack.org/mitaka/install-guide-ubuntu/ceilometer-swift.html>`__ <http://docs.openstack.org/project-install-guide/
telemetry/newton/configure_services/swift/install-swift-ubuntu.html>`__
section in the OpenStack Installation Guide. section in the OpenStack Installation Guide.
Telemetry middleware Telemetry middleware
@ -339,7 +341,7 @@ The following services can be polled with this agent:
framework framework
To install and configure this service use the `Add the Telemetry service To install and configure this service use the `Add the Telemetry service
<http://docs.openstack.org/mitaka/install-guide-ubuntu/ceilometer.html>`__ <http://docs.openstack.org/project-install-guide/telemetry/newton/install-base-ubuntu.html>`__
section in the OpenStack Installation Guide. section in the OpenStack Installation Guide.
The central agent does not need direct database connection. The samples The central agent does not need direct database connection. The samples
@ -414,7 +416,7 @@ Telemetry services.
For information about the required configuration options that have to be For information about the required configuration options that have to be
set in the ``ceilometer.conf`` configuration file for both the central set in the ``ceilometer.conf`` configuration file for both the central
and Compute agents, see the `Coordination section and Compute agents, see the `Coordination section
<http://docs.openstack.org/mitaka/config-reference/telemetry/telemetry_service_config_opts.html>`__ <http://docs.openstack.org/newton/config-reference/telemetry/telemetry-config-options.html>`__
in the OpenStack Configuration Reference. in the OpenStack Configuration Reference.
Notification agent HA deployment Notification agent HA deployment
@ -428,7 +430,7 @@ in a larger amount of load.
To enable workload partitioning by notification agent, the ``backend_url`` To enable workload partitioning by notification agent, the ``backend_url``
option must be set in the ``ceilometer.conf`` configuration file. option must be set in the ``ceilometer.conf`` configuration file.
Additionally, ``workload_partitioning`` should be enabled in the Additionally, ``workload_partitioning`` should be enabled in the
`Notification section <http://docs.openstack.org/mitaka/config-reference/telemetry/telemetry_service_config_opts.html>`__ in the OpenStack Configuration Reference. `Notification section <http://docs.openstack.org/newton/config-reference/telemetry/telemetry-config-options.html>`__ in the OpenStack Configuration Reference.
.. note:: .. note::
@ -465,8 +467,8 @@ For backward compatibility and supporting existing deployments, the
central agent configuration also supports using different configuration central agent configuration also supports using different configuration
files for groups of service instances of this type that are running in files for groups of service instances of this type that are running in
parallel. For enabling this configuration set a value for the parallel. For enabling this configuration set a value for the
``partitioning_group_prefix`` option in the `Central section ``partitioning_group_prefix`` option in the `polling section
<http://docs.openstack.org/mitaka/config-reference/telemetry/telemetry_service_config_opts.html>`__ <http://docs.openstack.org/newton/config-reference/telemetry/telemetry-config-options.html>`__
in the OpenStack Configuration Reference. in the OpenStack Configuration Reference.
.. warning:: .. warning::
@ -481,7 +483,7 @@ in the OpenStack Configuration Reference.
To enable the Compute agent to run multiple instances simultaneously To enable the Compute agent to run multiple instances simultaneously
with workload partitioning, the ``workload_partitioning`` option has to with workload partitioning, the ``workload_partitioning`` option has to
be set to ``True`` under the `Compute section be set to ``True`` under the `Compute section
<http://docs.openstack.org/mitaka/config-reference/telemetry/telemetry_service_config_opts.html>`__ <http://docs.openstack.org/newton/config-reference/telemetry/telemetry-config-options.html>`__
in the ``ceilometer.conf`` configuration file. in the ``ceilometer.conf`` configuration file.
@ -723,7 +725,7 @@ Multiple ``ceilometer-collector`` processes can be run at a time. It is also
supported to start multiple worker threads per collector process. The supported to start multiple worker threads per collector process. The
``collector_workers`` configuration option has to be modified in the ``collector_workers`` configuration option has to be modified in the
`Collector section `Collector section
<http://docs.openstack.org/mitaka/config-reference/telemetry/telemetry_service_config_opts.html>`__ <http://docs.openstack.org/newton/config-reference/telemetry/telemetry-config-options.html>`__
of the ``ceilometer.conf`` configuration file. of the ``ceilometer.conf`` configuration file.
Database dispatcher Database dispatcher
@ -780,7 +782,7 @@ target. The samples are sent without any modification. To set this
option as the collector's target, the ``dispatcher`` has to be changed option as the collector's target, the ``dispatcher`` has to be changed
to ``http`` in the ``ceilometer.conf`` configuration file. For the list to ``http`` in the ``ceilometer.conf`` configuration file. For the list
of options that you need to set, see the see the `dispatcher_http of options that you need to set, see the see the `dispatcher_http
section <http://docs.openstack.org/mitaka/config-reference/telemetry/telemetry_service_config_opts.html>`__ section <http://docs.openstack.org/newton/config-reference/telemetry/telemetry-config-options.html>`__
in the OpenStack Configuration Reference. in the OpenStack Configuration Reference.
File dispatcher File dispatcher
@ -789,18 +791,5 @@ File dispatcher
You can store samples in a file by setting the ``dispatcher`` option in the You can store samples in a file by setting the ``dispatcher`` option in the
``ceilometer.conf`` file. For the list of configuration options, ``ceilometer.conf`` file. For the list of configuration options,
see the `dispatcher_file section see the `dispatcher_file section
<http://docs.openstack.org/mitaka/config-reference/telemetry/telemetry_service_config_opts.html>`__ <http://docs.openstack.org/newton/config-reference/telemetry/telemetry-config-options.html>`__
in the OpenStack Configuration Reference.
Gnocchi dispatcher
------------------
The Telemetry service supports sending the metering data to Gnocchi back end
through the gnocchi dispatcher. To set this option as the target, change the
``dispatcher`` to ``gnocchi`` in the ``ceilometer.conf``
configuration file.
For the list of options that you need to set, see the
`dispatcher_gnocchi section
<http://docs.openstack.org/mitaka/config-reference/telemetry/telemetry_service_config_opts.html>`__
in the OpenStack Configuration Reference. in the OpenStack Configuration Reference.

View File

@ -51,7 +51,7 @@ the ``ceilometer.conf`` file. The meter pipeline and event pipeline
configuration files can be set by the ``pipeline_cfg_file`` and configuration files can be set by the ``pipeline_cfg_file`` and
``event_pipeline_cfg_file`` options listed in the `Description of ``event_pipeline_cfg_file`` options listed in the `Description of
configuration options for api table configuration options for api table
<http://docs.openstack.org/mitaka/config-reference/telemetry/telemetry_service_config_opts.html>`__ <http://docs.openstack.org/newton/config-reference/telemetry/telemetry-config-options.html>`__
section in the OpenStack Configuration Reference respectively. Multiple section in the OpenStack Configuration Reference respectively. Multiple
pipelines can be defined in one pipeline configuration file. pipelines can be defined in one pipeline configuration file.

View File

@ -189,7 +189,7 @@ the requested operations.
To be able to use the :command:`ceilometer` command, the To be able to use the :command:`ceilometer` command, the
python-ceilometerclient package needs to be installed and configured python-ceilometerclient package needs to be installed and configured
properly. For details about the installation process, see the `Telemetry properly. For details about the installation process, see the `Telemetry
chapter <http://docs.openstack.org/mitaka/install-guide-ubuntu/ceilometer.html>`__ chapter <http://docs.openstack.org/project-install-guide/telemetry/newton/>`__
in the OpenStack Installation Guide. in the OpenStack Installation Guide.
.. note:: .. note::

View File

@ -18,7 +18,7 @@ Event configuration
To enable the creation and storage of events in the Telemetry service To enable the creation and storage of events in the Telemetry service
``store_events`` option needs to be set to ``True``. For further configuration ``store_events`` option needs to be set to ``True``. For further configuration
options, see the event section in the `OpenStack Configuration Reference options, see the event section in the `OpenStack Configuration Reference
<http://docs.openstack.org/mitaka/config-reference/telemetry.html>`__. <http://docs.openstack.org/newton/config-reference/telemetry.html>`__.
.. note:: .. note::

View File

@ -20,7 +20,7 @@ below.
You may need to configure Telemetry or other OpenStack services in You may need to configure Telemetry or other OpenStack services in
order to be able to collect all the samples you need. For further order to be able to collect all the samples you need. For further
information about configuration requirements see the `Telemetry chapter information about configuration requirements see the `Telemetry chapter
<http://docs.openstack.org/mitaka/install-guide-ubuntu/ceilometer.html>`__ <http://docs.openstack.org/project-install-guide/telemetry/newton/>`__
in the OpenStack Installation Guide. Also check the `Telemetry manual in the OpenStack Installation Guide. Also check the `Telemetry manual
installation <http://docs.openstack.org/developer/ceilometer/install/manual.html>`__ installation <http://docs.openstack.org/developer/ceilometer/install/manual.html>`__
description. description.
@ -450,7 +450,7 @@ the compute host machines. In order to use that you need to set the
``compute_monitors`` option to ``ComputeDriverCPUMonitor`` in the ``compute_monitors`` option to ``ComputeDriverCPUMonitor`` in the
``nova.conf`` configuration file. For further information see the ``nova.conf`` configuration file. For further information see the
Compute configuration section in the `Compute chapter Compute configuration section in the `Compute chapter
<http://docs.openstack.org/mitaka/config-reference/compute/config-options.html>`__ <http://docs.openstack.org/newton/config-reference/compute/config-options.html>`__
of the OpenStack Configuration Reference. of the OpenStack Configuration Reference.
The following host machine related meters are collected for OpenStack The following host machine related meters are collected for OpenStack

View File

@ -156,7 +156,7 @@ Users, roles, and projects
This service of OpenStack uses OpenStack Identity for authenticating and This service of OpenStack uses OpenStack Identity for authenticating and
authorizing users. The required configuration options are listed in the authorizing users. The required configuration options are listed in the
`Telemetry `Telemetry
section <http://docs.openstack.org/mitaka/config-reference/telemetry.html>`__ section <http://docs.openstack.org/newton/config-reference/telemetry.html>`__
in the OpenStack Configuration Reference. in the OpenStack Configuration Reference.
The system uses two roles:``admin`` and ``non-admin``. The authorization The system uses two roles:``admin`` and ``non-admin``. The authorization

View File

@ -11,7 +11,7 @@ logging, the format of the log entries and the log levels.
The log settings can be changed in ``ceilometer.conf``. The list of The log settings can be changed in ``ceilometer.conf``. The list of
configuration options are listed in the logging configuration options configuration options are listed in the logging configuration options
table in the `Telemetry table in the `Telemetry
section <http://docs.openstack.org/mitaka/config-reference/telemetry.html>`__ section <http://docs.openstack.org/newton/config-reference/telemetry.html>`__
in the OpenStack Configuration Reference. in the OpenStack Configuration Reference.
By default ``stderr`` is used as standard output for the log messages. By default ``stderr`` is used as standard output for the log messages.

View File

@ -15,5 +15,5 @@ On the KVM host, run :command:`cat /proc/cpuinfo`. Make sure the ``vmx`` or
``svm`` flags are set. ``svm`` flags are set.
Follow the instructions in the `Enable KVM Follow the instructions in the `Enable KVM
<http://docs.openstack.org/mitaka/config-reference/compute/hypervisor-kvm.html#enable-kvm>`__ section in the OpenStack Configuration Reference to enable hardware <http://docs.openstack.org/newton/config-reference/compute/hypervisor-kvm.html#enable-kvm>`__ section in the OpenStack Configuration Reference to enable hardware
virtualization support in your BIOS. virtualization support in your BIOS.