openstack/openstack-manuals
Code Issues Proposed changes

Merge " openstack command check on networking-adv-features"

Browse Source
This commit is contained in:
Jenkins 2017-02-27 11:54:54 +00:00 committed by Gerrit Code Review
commit ecec6c0888
1 changed files with 18 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
doc/admin-guide/source/networking-adv-features.rst
View File

@ -212,7 +212,7 @@ basic L3 operations:
- .. code-block:: console
$ openstack network create public --external
$ openstack subnet create --network public --subnet-range 172.16.1.0/24 public-subnet
$ openstack subnet create --network public --subnet-range 172.16.1.0/24 subnetname
* - Lists external networks.
- .. code-block:: console
@ -221,12 +221,12 @@ basic L3 operations:
- .. code-block:: console
$ openstack network create net1
$ openstack subnet create --network net1 --subnet-range 10.0.0.0/24 subnet1
$ openstack subnet create --network net1 --subnet-range 10.0.0.0/24 subnetname1
$ openstack network create net2
$ openstack subnet create --network net2 --subnet-range 10.0.1.0/24 subnet2
$ openstack subnet create --network net2 --subnet-range 10.0.1.0/24 subnetname2
$ openstack router create router1
$ openstack router add subnet router1 SUBNET1_UUID
$ openstack router add subnet router1 SUBNET2_UUID
$ openstack router add subnet router1 subnetname1
$ openstack router add subnet router1 subnetname2
An internal router port can have only one IPv4 subnet and multiple IPv6 subnets
that belong to the same network ID. When you call ``router-interface-add`` with an IPv6
@ -237,7 +237,8 @@ basic L3 operations:
act as a NAT gateway for external connectivity.
- .. code-block:: console
$ openstack router set router1 --external-gateway EXT_NET_ID
$ openstack router set --external-gateway EXT_NET_ID router1
$ openstack router set --route destination=172.24.4.0/24,gateway=172.24.4.1 router1
The router obtains an interface with the gateway_ip address of the
subnet and this interface is attached to a port on the L2 Networking
@ -704,7 +705,7 @@ Router rule attributes
Each project router has a set of router rules associated with it. Each
router rule has the attributes in this table. Router rules and their
attributes can be set using the :command:`openstack router set` command,
attributes can be set using the :command:`neutron router-update` command,
through the horizon interface or the Networking API.
.. list-table:: **Big Switch Router rule attributes**
@ -856,4 +857,13 @@ complete basic L3 metering operations:
* - Lists the value of created metering label rules.
- .. code-block:: console
$ ceilometer sample-list -m bandwidth -q resource=LABEL_UUID
$ ceilometer sample-list -m SNMP_MEASUREMENT
For example:
.. code-block:: console
$ ceilometer sample-list -m hardware.network.bandwidth.bytes
$ ceilometer sample-list -m hardware.network.incoming.bytes
$ ceilometer sample-list -m hardware.network.outgoing.bytes
$ ceilometer sample-list -m hardware.network.outgoing.errors