============================================ Troubleshoot the Block Storage configuration ============================================ Most Block Storage errors are caused by incorrect volume configurations that result in volume creation failures. To resolve these failures, review these logs: - ``cinder-api`` log (``/var/log/cinder/api.log``) - ``cinder-volume`` log (``/var/log/cinder/volume.log``) The ``cinder-api`` log is useful for determining if you have endpoint or connectivity issues. If you send a request to create a volume and it fails, review the ``cinder-api`` log to determine whether the request made it to the Block Storage service. If the request is logged and you see no errors or tracebacks, check the ``cinder-volume`` log for errors or tracebacks. .. note:: Create commands are listed in the ``cinder-api`` log. These entries in the ``cinder.openstack.common.log`` file can be used to assist in troubleshooting your Block Storage configuration. .. code-block:: console # Print debugging output (set logging level to DEBUG instead # of default WARNING level). (boolean value) # debug=false # Print more verbose output (set logging level to INFO instead # of default WARNING level). (boolean value) # verbose=false # Log output to standard error (boolean value) # use_stderr=true # Default file mode used when creating log files (string # value) # logfile_mode=0644 # format string to use for log messages with context (string # value) # logging_context_format_string=%(asctime)s.%(msecs)03d %(levelname)s # %(name)s [%(request_id)s %(user)s %(tenant)s] %(instance)s%(message)s # format string to use for log mes #logging_default_format_string=%(asctime)s. # %(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s # data to append to log format when level is DEBUG (string # value) # logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d # prefix each line of exception output with this format # (string value) # logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d TRACE %(name)s # %(instance)s # list of logger=LEVEL pairs (list value) # default_log_levels=amqplib=WARN,sqlalchemy=WARN,boto=WARN,suds=INFO, # keystone=INFO,eventlet.wsgi.server=WARNsages without context # (string value) # If an instance is passed with the log message, format it # like this (string value) # instance_format="[instance: %(uuid)s]" # If an instance UUID is passed with the log message, format # it like this (string value) #instance_uuid_format="[instance: %(uuid)s] " # Format string for %%(asctime)s in log records. Default: # %(default)s (string value) # log_date_format=%Y-%m-%d %H:%M:%S # (Optional) Name of log file to output to. If not set, # logging will go to stdout. (string value) # log_file= # (Optional) The directory to keep log files in (will be # prepended to --log-file) (string value) # log_dir= # instance_uuid_format="[instance: %(uuid)s]" # If this option is specified, the logging configuration file # specified is used and overrides any other logging options # specified. Please see the Python logging module # documentation for details on logging configuration files. # (string value) # Use syslog for logging. (boolean value) # use_syslog=false # syslog facility to receive log lines (string value) # syslog_log_facility=LOG_USER # log_config= These common issues might occur during configuration, and the following potential solutions describe how to address the issues. Issues with ``state_path`` and ``volumes_dir`` settings ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Problem ------- The OpenStack Block Storage uses ``tgtd`` as the default iSCSI helper and implements persistent targets. This means that in the case of a ``tgt`` restart, or even a node reboot, your existing volumes on that node will be restored automatically with their original :term:`IQN `. By default, Block Storage uses a ``state_path`` variable, which if installing with Yum or APT should be set to ``/var/lib/cinder/``. The next part is the ``volumes_dir`` variable, by default this appends a ``volumes`` directory to the ``state_path``. The result is a file-tree: ``/var/lib/cinder/volumes/``. Solution -------- In order to ensure nodes are restored to their original IQN, the iSCSI target information needs to be stored in a file on creation that can be queried in case of restart of the ``tgt daemon``. While the installer should handle all this, it can go wrong. If you have trouble creating volumes and this directory does not exist you should see an error message in the ``cinder-volume`` log indicating that the ``volumes_dir`` does not exist, and it should provide information about which path it was looking for. The persistent tgt include file ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Problem ------- The Block Storage service may have issues locating the persistent ``tgt include`` file. Along with the ``volumes_dir`` option, the iSCSI target driver also needs to be configured to look in the correct place for the persistent ``tgt include `` file. This is an entry in the ``/etc/tgt/conf.d`` file that should have been set during the OpenStack installation. Solution -------- If issues occur, verify that you have a ``/etc/tgt/conf.d/cinder.conf`` file. If the file is not present, create it with: .. code-block:: console # echo 'include /var/lib/cinder/volumes/ *' >> /etc/tgt/conf.d/cinder.conf No sign of attach call in the ``cinder-api`` log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Problem ------- The attach call is unavailable, or not appearing in the ``cinder-api`` log. Solution -------- Adjust the ``nova.conf`` file, and make sure that your ``nova.conf`` has this entry: .. code-block:: ini volume_api_class=nova.volume.cinder.API Failed to create iscsi target error in the ``cinder-volume.log`` file ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Problem ------- .. code-block:: console 2013-03-12 01:35:43 1248 TRACE cinder.openstack.common.rpc.amqp \ ISCSITargetCreateFailed: \ Failed to create iscsi target for volume \ volume-137641b2-af72-4a2f-b243-65fdccd38780. You might see this error in ``cinder-volume.log`` after trying to create a volume that is 1 GB. Solution -------- To fix this issue, change the content of the ``/etc/tgt/targets.conf`` file from ``include /etc/tgt/conf.d/*.conf`` to ``include /etc/tgt/conf.d/cinder_tgt.conf``, as follows: .. code-block:: ini include /etc/tgt/conf.d/cinder_tgt.conf include /etc/tgt/conf.d/cinder.conf default-driver iscsi Restart ``tgt`` and ``cinder-*`` services, so they pick up the new configuration.