========================== Create and manage networks ========================== Before you run commands, set the following environment variables: .. code-block:: bash export OS_USERNAME=admin export OS_PASSWORD=password export OS_TENANT_NAME=admin export OS_AUTH_URL=http://localhost:5000/v2.0 Create networks ~~~~~~~~~~~~~~~ #. List the extensions of the system: .. code-block:: console $ neutron ext-list -c alias -c name +-----------------+--------------------------+ | alias | name | +-----------------+--------------------------+ | agent_scheduler | Agent Schedulers | | binding | Port Binding | | quotas | Quota management support | | agent | agent | | provider | Provider Network | | router | Neutron L3 Router | | lbaas | LoadBalancing service | | extraroute | Neutron Extra Route | +-----------------+--------------------------+ #. Create a network: .. code-block:: console $ neutron net-create net1 Created a new network: +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | True | | id | 2d627131-c841-4e3a-ace6-f2dd75773b6d | | name | net1 | | provider:network_type | vlan | | provider:physical_network | physnet1 | | provider:segmentation_id | 1001 | | router:external | False | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 | +---------------------------+--------------------------------------+ .. note:: Some fields of the created network are invisible to non-admin users. #. Create a network with specified provider network type. .. code-block:: console $ neutron net-create net2 --provider:network-type local Created a new network: +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | True | | id | 524e26ea-fad4-4bb0-b504-1ad0dc770e7a | | name | net2 | | provider:network_type | local | | provider:physical_network | | | provider:segmentation_id | | | router:external | False | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 | +---------------------------+--------------------------------------+ Just as shown previously, the unknown option ``--provider:network-type`` is used to create a ``local`` provider network. Create subnets ~~~~~~~~~~~~~~ Create a subnet: .. code-block:: console $ neutron subnet-create net1 192.168.2.0/24 --name subnet1 Created a new subnet: +------------------+--------------------------------------------------+ | Field | Value | +------------------+--------------------------------------------------+ | allocation_pools | {"start": "192.168.2.2", "end": "192.168.2.254"} | | cidr | 192.168.2.0/24 | | dns_nameservers | | | enable_dhcp | True | | gateway_ip | 192.168.2.1 | | host_routes | | | id | 15a09f6c-87a5-4d14-b2cf-03d97cd4b456 | | ip_version | 4 | | name | subnet1 | | network_id | 2d627131-c841-4e3a-ace6-f2dd75773b6d | | tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 | +------------------+--------------------------------------------------+ The ``subnet-create`` command has the following positional and optional parameters: - The name or ID of the network to which the subnet belongs. In this example, ``net1`` is a positional argument that specifies the network name. - The CIDR of the subnet. In this example, ``192.168.2.0/24`` is a positional argument that specifies the CIDR. - The subnet name, which is optional. In this example, ``--name subnet1`` specifies the name of the subnet. For information and examples on more advanced use of neutron's ``subnet`` subcommand, see the `OpenStack Administrator Guide `__. Create routers ~~~~~~~~~~~~~~ #. Create a router: .. code-block:: console $ neutron router-create router1 Created a new router: +-----------------------+--------------------------------------+ | Field | Value | +-----------------------+--------------------------------------+ | admin_state_up | True | | external_gateway_info | | | id | 6e1f11ed-014b-4c16-8664-f4f615a3137a | | name | router1 | | status | ACTIVE | | tenant_id | 7b5970fbe7724bf9b74c245e66b92abf | +-----------------------+--------------------------------------+ Take note of the unique router identifier returned, this will be required in subsequent steps. #. Link the router to the external provider network: .. code-block:: console $ neutron router-gateway-set ROUTER NETWORK Replace ROUTER with the unique identifier of the router, replace NETWORK with the unique identifier of the external provider network. #. Link the router to the subnet: .. code-block:: console $ neutron router-interface-add ROUTER SUBNET Replace ROUTER with the unique identifier of the router, replace SUBNET with the unique identifier of the subnet. Create ports ~~~~~~~~~~~~ #. Create a port with specified IP address: .. code-block:: console $ neutron port-create net1 --fixed-ip ip_address=192.168.2.40 Created a new port: +----------------------+----------------------------------------------------------------------+ | Field | Value | +----------------------+----------------------------------------------------------------------+ | admin_state_up | True | | binding:capabilities | {"port_filter": false} | | binding:vif_type | ovs | | device_id | | | device_owner | | | fixed_ips | {"subnet_id": "15a09f6c-87a5-4d14-b2cf-03d97cd4b456", "ip_address... | | id | f7a08fe4-e79e-4b67-bbb8-a5002455a493 | | mac_address | fa:16:3e:97:e0:fc | | name | | | network_id | 2d627131-c841-4e3a-ace6-f2dd75773b6d | | status | DOWN | | tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 | +----------------------+----------------------------------------------------------------------+ In the previous command, ``net1`` is the network name, which is a positional argument. :option:`--fixed-ip ip_address=192.168.2.40` is an option which specifies the port's fixed IP address we wanted. .. note:: When creating a port, you can specify any unallocated IP in the subnet even if the address is not in a pre-defined pool of allocated IP addresses (set by your cloud provider). #. Create a port without specified IP address: .. code-block:: console $ neutron port-create net1 Created a new port: +----------------------+----------------------------------------------------------------------+ | Field | Value | +----------------------+----------------------------------------------------------------------+ | admin_state_up | True | | binding:capabilities | {"port_filter": false} | | binding:vif_type | ovs | | device_id | | | device_owner | | | fixed_ips | {"subnet_id": "15a09f6c-87a5-4d14-b2cf-03d97cd4b456", "ip_address... | | id | baf13412-2641-4183-9533-de8f5b91444c | | mac_address | fa:16:3e:f6:ec:c7 | | name | | | network_id | 2d627131-c841-4e3a-ace6-f2dd75773b6d | | status | DOWN | | tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 | +----------------------+----------------------------------------------------------------------+ .. note:: Note that the system allocates one IP address if you do not specify an IP address in the :command:`neutron port-create` command. #. Query ports with specified fixed IP addresses: .. code-block:: console $ neutron port-list --fixed-ips ip_address=192.168.2.2 \ ip_address=192.168.2.40 +----------------+------+-------------------+-------------------------------------------------+ | id | name | mac_address | fixed_ips | +----------------+------+-------------------+-------------------------------------------------+ | baf13412-26... | | fa:16:3e:f6:ec:c7 | {"subnet_id"... ..."ip_address": "192.168.2.2"} | | f7a08fe4-e7... | | fa:16:3e:97:e0:fc | {"subnet_id"... ..."ip_address": "192.168.2.40"}| +----------------+------+-------------------+-------------------------------------------------+ :option:`--fixed-ips ip_address=192.168.2.2 ip_address=192.168.2.40` is one unknown option. **How to find unknown options** The unknown options can be easily found by watching the output of :command:`create_xxx` or :command:`show_xxx` command. For example, in the port creation command, we see the fixed\_ips fields, which can be used as an unknown option.