# # Translators: msgid "" msgstr "" "Project-Id-Version: OpenStack Manuals\n" "POT-Creation-Date: 2014-04-25 00:12+0000\n" "PO-Revision-Date: 2014-04-24 19:10+0000\n" "Last-Translator: openstackjenkins \n" "Language-Team: Czech (http://www.transifex.com/projects/p/openstack-manuals-i18n/language/cs/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: cs\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" #: ./doc/user-guide/section_dashboard_create_networks.xml12(title) msgid "Create and manage networks" msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml14(para) msgid "" "The OpenStack Networking service provides a scalable system for managing the" " network connectivity within an OpenStack cloud deployment. It can easily " "and quickly react to changing network needs (for example, creating and " "assigning new IP addresses)." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml19(para) msgid "" "Networking in OpenStack is complex. This section provides the basic " "instructions for creating a network and a router. For detailed information " "about managing networks, refer to the OpenStack Cloud Administrator Guide." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml26(title) msgid "Create a network" msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml29(para) msgid "" "Log in to the dashboard, choose a project, and click " "Networks." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml33(para) msgid "Click Create Network." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml36(para) msgid "In the Create Network dialog box, specify the following values." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml44(guilabel) msgid "Network" msgstr "Síť" #: ./doc/user-guide/section_dashboard_create_networks.xml44(th) #: ./doc/user-guide/section_dashboard_create_networks.xml53(th) #: ./doc/user-guide/section_dashboard_create_networks.xml86(th) #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml59(th) #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml180(th) #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml206(th) #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml218(th) msgid " tab" msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml49(guilabel) msgid "Network Name" msgstr "Název sítě" #: ./doc/user-guide/section_dashboard_create_networks.xml50(para) msgid "Specify a name to identify the network." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml54(guilabel) #: ./doc/user-guide/section_dashboard_create_networks.xml159(guilabel) msgid "Subnet" msgstr "Podsíť" #: ./doc/user-guide/section_dashboard_create_networks.xml57(guilabel) msgid "Create Subnet" msgstr "Vytvořit podsíť" #: ./doc/user-guide/section_dashboard_create_networks.xml58(para) msgid "Select this check box to create a subnet" msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml59(para) msgid "" "You do not have to specify a subnet when you create a network, but if you do" " not, any attached instance receives an Error status." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml64(guilabel) msgid "Subnet Name" msgstr "Název podsítě" #: ./doc/user-guide/section_dashboard_create_networks.xml65(para) msgid "Specify a name for the subnet." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml68(guilabel) msgid "Network Address" msgstr "Síťová adresa" #: ./doc/user-guide/section_dashboard_create_networks.xml69(para) msgid "Specify the IP address for the subnet." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml72(guilabel) msgid "IP Version" msgstr "Verze IP" #: ./doc/user-guide/section_dashboard_create_networks.xml73(para) msgid "Select IPv4 or IPv6." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml76(guilabel) msgid "Gateway IP" msgstr "IP brány" #: ./doc/user-guide/section_dashboard_create_networks.xml77(para) msgid "" "Specify an IP address for a specific gateway. This parameter is optional." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml81(guilabel) msgid "Disable Gateway" msgstr "Zakázat bránu" #: ./doc/user-guide/section_dashboard_create_networks.xml82(para) msgid "Select this check box to disable a gateway IP address." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml86(guilabel) msgid "Subnet Detail" msgstr "Podrobnosti podsítě" #: ./doc/user-guide/section_dashboard_create_networks.xml89(guilabel) msgid "Enable DHCP" msgstr "Povolit DHCP" #: ./doc/user-guide/section_dashboard_create_networks.xml90(para) msgid "Select this check box to enable DHCP." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml93(guilabel) msgid "Allocation Pools" msgstr "Přidělovací zásoby" #: ./doc/user-guide/section_dashboard_create_networks.xml94(para) msgid "Specify IP address pools." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml97(guilabel) msgid "DNS Name Servers" msgstr "DNS servery" #: ./doc/user-guide/section_dashboard_create_networks.xml98(para) msgid "Specify a name for the DNS server." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml101(guilabel) msgid "Host Routes" msgstr "Trasy hostitele" #: ./doc/user-guide/section_dashboard_create_networks.xml102(para) msgid "Specify the IP address of host routes." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml108(para) msgid "Click Create." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml109(para) msgid "" "The dashboard shows the network on the Networks tab." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml115(title) msgid "Create a router" msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml118(para) msgid "" "Log in to the dashboard, choose a project, and click " "Routers." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml122(para) msgid "Click Create Router." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml124(para) msgid "" "In the Create Router dialog box, specify a name for the router and click " "Create Router." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml126(para) msgid "" "The new router is now displayed in the Routers tab." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml130(para) msgid "Click the new router's Set Gateway button." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml134(para) msgid "" "In the External Network field, specify the network to " "which the router will connect, and then click Set " "Gateway." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml139(para) msgid "" "To connect a private network to the newly created router, perform the " "following steps:" msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml143(para) msgid "On the Routers tab, click the name of the router." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml147(para) msgid "On the Router Details page, click Add Interface." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml151(para) msgid "In the Add Interface dialog box, specify the following information:" msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml163(para) msgid "Select a subnet." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml168(guilabel) msgid "IP Address (optional)" msgstr "IP adresa (nepovinné)" #: ./doc/user-guide/section_dashboard_create_networks.xml171(para) msgid "Enter the router interface IP address for the selected subnet." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml173(para) msgid "" "Note: If this value is not set, then by default, the first host IP address " "in the subnet is used by OpenStack Networking." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml180(para) msgid "" "The Router Name and Router ID " "fields are automatically updated." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml186(para) msgid "Click Add Interface." msgstr "" #: ./doc/user-guide/section_dashboard_create_networks.xml189(para) msgid "" "You have successfully created the router. You can view the new topology from" " the Network Topology tab." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml7(title) msgid "Use snapshots to migrate instance" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml9(para) msgid "Some cloud providers allow only administrators to perform these steps." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml12(para) msgid "" "To use snapshots to migrate instances from OpenStack projects to clouds, " "complete these steps:" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml16(para) msgid "Create a snapshot of the instance." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml19(para) msgid "Download the snapshot as an image." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml22(para) msgid "Import the snapshot to the new environment." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml25(para) msgid "Boot a new instance from the snapshot." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml29(para) msgid "" "Perform the and procedures in the source project." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml32(para) msgid "" "Perform the and in the destination project." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml37(title) msgid "Create a snapshot of the instance" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml40(para) msgid "" "Always shut down the source VM before you take the snapshot to make sure " "that all data is flushed to disk." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml52(para) msgid "Confirm that the instance shows a SHUTOFF status." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml63(para) msgid "" "Use the command to take a snapshot. Use the " " command to check the status until the status is " "ACTIVE:" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml73(replaceable) msgid "example" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml73(replaceable) msgid "examplesnapshot" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml88(title) msgid "Download the snapshot as an image" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml91(para) msgid "Get the image ID:" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml100(para) msgid "" "Download the snapshot by using the image ID that was returned in the " "previous step:" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml102(replaceable) msgid "snapshot.raw" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml102(replaceable) msgid "f30b204e-1ce6-40e7-b8d9-b353d4d84e7d" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml104(para) msgid "" "The command requires the image ID and cannot use the image " "name." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml107(para) msgid "" "Ensure there is sufficient space on the destination file system for the " "image file." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml113(para) msgid "" "Make the image available to the new environment, either through http or with" " direct upload to a machine ()." msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml120(title) msgid "Import the snapshot to new environment" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml123(para) msgid "In the new project or cloud environment, import the snapshot:" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml125(replaceable) msgid "IMAGE_URL" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml130(title) msgid "Boot a new instance from the snapshot" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml133(para) msgid "" "In the new project or cloud environment, use the snapshot to create the new " "instance:" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml135(replaceable) msgid "EXAMPLE_SNAPSHOT" msgstr "" #: ./doc/user-guide/section_cli_nova_migrate_instances.xml135(replaceable) msgid "NEW_INSTANCE" msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml13(title) msgid "Manage volumes" msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml15(para) msgid "" "Volumes are block storage devices that you attach to instances to enable " "persistent storage. You can attach a volume to a running instance or detach " "a volume and attach it to another instance at any time. You can also create " "a snapshot from or delete a volume. Only administrative users can create " "volume types." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml22(title) msgid "Create a volume" msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml26(para) #: ./doc/user-guide/section_dashboard_manage_volumes.xml124(para) #: ./doc/user-guide/section_dashboard_manage_volumes.xml161(para) #: ./doc/user-guide/section_dashboard_manage_volumes.xml208(para) msgid "" "Log in to the dashboard, choose a project, and click " "Volumes." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml30(para) #: ./doc/user-guide/section_dashboard_manage_volumes.xml109(para) msgid "Click Create Volume." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml31(para) msgid "In the dialog box that opens, enter or select the following values." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml40(guilabel) msgid "Volume Name" msgstr "Název svazku" #: ./doc/user-guide/section_dashboard_manage_volumes.xml44(para) msgid "Specify a name for the volume." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml51(guilabel) #: ./doc/user-guide/section_dashboard_manage_images.xml64(guilabel) msgid "Description" msgstr "Popis" #: ./doc/user-guide/section_dashboard_manage_volumes.xml55(para) msgid "Optionally, provide a brief description for the volume." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml62(guilabel) msgid "Type" msgstr "Typ" #: ./doc/user-guide/section_dashboard_manage_volumes.xml66(para) msgid "Leave this field blank." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml72(guilabel) msgid "Size (GB)" msgstr "Velikost (GB)" #: ./doc/user-guide/section_dashboard_manage_volumes.xml76(para) msgid "The size of the volume in gigabytes." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml83(guilabel) msgid "Volume Source" msgstr "Zdroj svazku" #: ./doc/user-guide/section_dashboard_manage_volumes.xml87(para) msgid "Select one of the following options:" msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml91(para) msgid "No source, empty volume: creates an empty volume." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml93(para) msgid "" "Note: An empty volume does not contain a file system or a partition table." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml97(para) msgid "" "Image: creates a volume from an image. Select the image" " from the list." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml113(para) msgid "" "The dashboard shows the volume on the Volumes tab." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml117(title) msgid "Attach a volume to an instance" msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml118(para) msgid "" "After you create one or more volumes, you can attach them to instances. You " "can attach a volume to one instance at a time." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml128(para) msgid "" "Select the volume to add to an instance and click Edit " "Attachments." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml132(para) msgid "In the Manage Volume Attachments dialog box, select an instance." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml137(para) msgid "" "Enter the name of the device from which the volume is accessible by the " "instance." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml140(para) msgid "" "The actual device name might differ from the volume name because of " "hypervisor settings." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml146(para) msgid "Click Attach Volume." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml147(para) msgid "" "The dashboard shows the instance to which the volume is now attached and the" " device name." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml151(para) msgid "" "You can view the status of a volume in the Volumes tab " "of the dashboard. The volume is either Available or In-Use." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml154(para) msgid "" "Now you can log in to the instance and mount, format, and use the disk." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml158(title) msgid "Detach a volume from an instance" msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml165(para) msgid "Select the volume and click Edit Attachments." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml169(para) msgid "Click Detach Volume and confirm your changes." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml173(para) #: ./doc/user-guide/section_dashboard_manage_volumes.xml218(para) msgid "A message indicates whether the action was successful." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml177(title) msgid "Create a snapshot from a volume" msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml180(para) msgid "" "Log in to the dashboard, choose a project, and click " "Volumes." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml184(para) msgid "Select a volume from which to create a snapshot." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml187(para) msgid "" "From the More list, select Create " "Snapshot." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml191(para) msgid "" "In the dialog box that opens, enter a snapshot name and a brief description." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml195(para) msgid "Confirm your changes." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml196(para) msgid "" "The dashboard shows the new volume snapshot in Images & " "Snapshots." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml203(title) msgid "Delete a volume" msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml204(para) msgid "" "When you delete an instance, the data in its attached volumes is not " "destroyed." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml212(para) msgid "Select the check boxes for the volumes that you want to delete." msgstr "" #: ./doc/user-guide/section_dashboard_manage_volumes.xml216(para) msgid "Click Delete Volumes and confirm your choice." msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml7(title) msgid "Manage images" msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml9(title) msgid "List images" msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml10(para) msgid "" "To list the available images, call the " "glanceclient.v2.images.Controller.list method:" msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml16(para) msgid "" "The images method returns a Python generator, as " "shown in the following interaction with the Python interpreter:" msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml76(title) msgid "Get image by ID" msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml77(para) msgid "" "To retrieve an image object from its ID, call the " "glanceclient.v2.images.Controller.get method:" msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml87(title) msgid "Get image by name" msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml88(para) msgid "" "The Image Service Python bindings do not support the retrieval of an image " "object by name. However, the Compute Python bindings enable you to get an " "image object by name. To get an image object by name, call the " "novaclient.v1_1.images.ImageManager.find method:" msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml100(title) #: ./doc/user-guide/section_dashboard_manage_images.xml28(title) msgid "Upload an image" msgstr "" #: ./doc/user-guide/section_sdk_manage_images.xml101(para) msgid "" "To upload an image, call the " "glanceclient.v2.images.ImageManager.create method:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml9(title) msgid "Create and manage stacks" msgstr "" #: ./doc/user-guide/section_cli_heat.xml10(para) #: ./doc/user-guide/section_dashboard_stacks.xml29(para) msgid "" "The template languages are described in the" " Template Guide in the Heat developer " "documentation." msgstr "" #: ./doc/user-guide/section_cli_heat.xml17(title) msgid "Create a stack from an example template file" msgstr "" #: ./doc/user-guide/section_cli_heat.xml20(para) msgid "" "To create a stack, or template, from an example template " "file, run the following command:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml24(replaceable) #: ./doc/user-guide/section_cli_heat.xml45(replaceable) msgid "PATH_TO_HEAT_TEMPLATES" msgstr "" #: ./doc/user-guide/section_cli_heat.xml25(replaceable) msgid "USERNAME" msgstr "" #: ./doc/user-guide/section_cli_heat.xml25(replaceable) msgid "PASSWORD" msgstr "" #: ./doc/user-guide/section_cli_heat.xml25(replaceable) msgid "HEAT_KEY" msgstr "" #: ./doc/user-guide/section_cli_heat.xml26(para) msgid "" "The --parameters values that you specify depend on the " "parameters that are defined in the template. If a website hosts the template" " file, you can specify the URL with the --template-url " "parameter instead of the --template-file parameter." msgstr "" #: ./doc/user-guide/section_cli_heat.xml32(para) msgid "The command returns the following output:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml40(para) msgid "" "You can also use the command to validate a template file " "without creating a stack from it." msgstr "" #: ./doc/user-guide/section_cli_heat.xml44(para) msgid "To do so, run the following command:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml46(para) msgid "If validation fails, the response returns an error message." msgstr "" #: ./doc/user-guide/section_cli_heat.xml52(title) msgid "Get information about stacks" msgstr "" #: ./doc/user-guide/section_cli_heat.xml53(para) msgid "" "To explore the state and history of a particular stack, you can run a number" " of commands." msgstr "" #: ./doc/user-guide/section_cli_heat.xml57(para) msgid "" "To see which stacks are visible to the current user, run the following " "command:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml68(para) msgid "To show the details of a stack, run the following command:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml73(para) msgid "A stack consists of a collection of resources." msgstr "" #: ./doc/user-guide/section_cli_heat.xml75(para) msgid "To list the resources and their status, run the following command:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml85(para) msgid "" "To show the details for the specified resource in a stack, run the following" " command:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml88(para) msgid "" "Some resources have associated metadata which can change throughout the " "life-cycle of a resource:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml94(para) msgid "A series of events is generated during the life-cycle of a stack." msgstr "" #: ./doc/user-guide/section_cli_heat.xml96(para) msgid "To display life-cycle events, run:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml106(para) msgid "To show the details for a particular event, run the following command:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml113(title) msgid "Update a stack" msgstr "" #: ./doc/user-guide/section_cli_heat.xml116(para) msgid "" "To update an existing stack from a modified template file, run a command " "like the following command:" msgstr "" #: ./doc/user-guide/section_cli_heat.xml127(para) msgid "" "Some resources are updated in-place, while others are replaced with new " "resources." msgstr "" #: ./doc/user-guide/ch_sdk.xml6(title) msgid "OpenStack Python SDK" msgstr "" #: ./doc/user-guide/ch_sdk.xml8(para) msgid "" "Use the OpenStack Python Software Development Kit (SDK) to write Python " "automation scripts that create and manage resources in your OpenStack cloud." " The SDK implements Python bindings to the OpenStack API, which enables you " "to perform automation tasks in Python by making calls on Python objects " "rather than making REST calls directly. All OpenStack command-line tools are" " implemented using the Python SDK." msgstr "" #: ./doc/user-guide/ch_sdk.xml15(para) msgid "You should also be familiar with:" msgstr "" #: ./doc/user-guide/ch_sdk.xml18(para) msgid "RESTful web services" msgstr "" #: ./doc/user-guide/ch_sdk.xml21(para) msgid "HTTP/1.1" msgstr "" #: ./doc/user-guide/ch_sdk.xml24(para) msgid "JSON and XML data serialization formats" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml12(title) #: ./doc/user-guide/section_sdk_configure_instances.xml6(title) #: ./doc/user-guide/section_cli_nova_configure_instances.xml17(title) msgid "Configure access and security for instances" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml14(para) msgid "" "Before you launch an instance, you should add security group rules to enable" " users to ping and use SSH to connect to the instance. To do so, you either " "add rules to the default security " "group or add a security group with rules." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml20(para) msgid "" "Key pairs are SSH credentials that are injected into an instance when it is " "launched. To use key pair injection, the image that the instance is based on" " must contain the cloud-init package. Each project should" " have at least one key pair. For more information, see ." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml26(para) msgid "" "If you have generated a key pair with an external tool, you can import it " "into OpenStack. The key pair can be used for multiple instances that belong " "to a project. For more information, see ." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml31(para) msgid "" "When an instance is created in OpenStack, it is automatically assigned a " "fixed IP address in the network to which the instance is assigned. This IP " "address is permanently associated with the instance until the instance is " "terminated. However, in addition to the fixed IP address, a floating IP " "address can also be attached to an instance. Unlike fixed IP addresses, " "floating IP addresses are able to have their associations modified at any " "time, regardless of the state of the instances involved." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml41(title) msgid "Add a rule to the default security group" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml42(para) msgid "" "This procedure enables SSH and ICMP (ping) access to instances. The rules " "apply to all instances within a given project, and should be set for every " "project unless there is a reason to prohibit SSH or ICMP access to the " "instances." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml47(para) msgid "" "This procedure can be adjusted as necessary to add additional security group" " rules to a project, if your cloud requires them." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml52(para) msgid "" "Log in to the dashboard, choose a project, and click Access & " "Security. The Security Groups tab shows the " "security groups that are available for this project." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml59(para) msgid "" "Select the default security group and click " "Edit Rules." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml64(para) msgid "To allow SSH access, click Add Rule." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml68(para) #: ./doc/user-guide/section_dashboard_access_and_security.xml111(para) msgid "In the Add Rule dialog box, enter the following values:" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml75(guilabel) #: ./doc/user-guide/section_dashboard_access_and_security.xml117(guilabel) msgid "Rule" msgstr "Pravidlo" #: ./doc/user-guide/section_dashboard_access_and_security.xml77(literal) msgid "SSH" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml81(guilabel) #: ./doc/user-guide/section_dashboard_access_and_security.xml125(guilabel) msgid "Remote" msgstr "Vzdálené" #: ./doc/user-guide/section_dashboard_access_and_security.xml84(literal) #: ./doc/user-guide/section_dashboard_access_and_security.xml88(guilabel) #: ./doc/user-guide/section_dashboard_access_and_security.xml126(literal) #: ./doc/user-guide/section_dashboard_access_and_security.xml129(guilabel) msgid "CIDR" msgstr "CIDR" #: ./doc/user-guide/section_dashboard_access_and_security.xml90(literal) #: ./doc/user-guide/section_dashboard_access_and_security.xml130(literal) msgid "0.0.0.0/0" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml96(para) msgid "" "To accept requests from a particular range of IP addresses, specify the IP " "address block in the CIDR box." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml102(para) #: ./doc/user-guide/section_dashboard_access_and_security.xml135(para) msgid "Click Add." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml103(para) msgid "" "Instances will now have SSH port 22 open for requests from any IP address." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml107(para) msgid "To add an ICMP rule, click Add Rule." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml118(literal) msgid "All ICMP" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml121(guilabel) msgid "Direction" msgstr "Směr" #: ./doc/user-guide/section_dashboard_access_and_security.xml122(literal) msgid "Ingress" msgstr "Vstup" #: ./doc/user-guide/section_dashboard_access_and_security.xml136(para) msgid "Instances will now accept all incoming ICMP packets." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml142(title) #: ./doc/user-guide/section_cli_nova_configure_instances.xml79(title) msgid "Add a key pair" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml143(para) msgid "Create at least one key pair for each project." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml146(para) #: ./doc/user-guide/section_dashboard_access_and_security.xml175(para) #: ./doc/user-guide/section_dashboard_access_and_security.xml243(para) msgid "" "Log in to the dashboard, choose a project, and click Access & " "Security." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml151(para) #: ./doc/user-guide/section_dashboard_access_and_security.xml180(para) msgid "" "Click the Keypairs tab, which shows the key pairs that " "are available for this project." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml156(para) msgid "Click Create Keypair." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml160(para) msgid "" "In the Create Keypair dialog box, enter a name for your key pair, and click " "Create Keypair." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml166(para) msgid "Respond to the prompt to download the key pair." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml172(title) #: ./doc/user-guide/section_cli_nova_configure_instances.xml101(title) msgid "Import a key pair" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml185(para) msgid "Click Import Keypair." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml189(para) msgid "" "In the Import Keypair dialog box, enter the name of your key pair, copy the " "public key into the Public Key box, and then click " "Import Keypair." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml196(para) msgid "Save the *.pem file locally." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml198(para) msgid "" "To change its permissions so that only you can read and write to the file, " "run the following command:" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml201(replaceable) #: ./doc/user-guide/section_dashboard_access_and_security.xml217(replaceable) msgid "yourPrivateKey" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml203(para) msgid "" "If you are using the dashboard from a Windows computer, use PuTTYgen to load" " the *.pem file and convert and save it as " "*.ppk. For more information see the WinSCP web page for " "PuTTYgen." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml215(para) msgid "To make the key pair known to SSH, run the command." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml220(para) msgid "The Compute database registers the public key of the key pair." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml222(para) msgid "" "The dashboard lists the key pair on the Access & " "Security tab." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml226(title) msgid "Allocate a floating IP address to an instance" msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml227(para) msgid "" "When an instance is created in OpenStack, it is automatically assigned a " "fixed IP address in the network to which the instance is assigned. This IP " "address is permanently associated with the instance until the instance is " "terminated." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml233(para) msgid "" "However, in addition to the fixed IP address, a floating IP address can also" " be attached to an instance. Unlike fixed IP addresses, floating IP " "addresses can have their associations modified at any time, regardless of " "the state of the instances involved. This procedure details the reservation " "of a floating IP address from an existing pool of addresses and the " "association of that address with a specific instance." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml247(para) msgid "" "Click the Floating IPs tab, which shows the floating IP" " addresses allocated to instances." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml252(para) msgid "Click Allocate IP to Project." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml255(para) msgid "Choose the pool from which to pick the IP address." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml259(para) msgid "Click Allocate IP." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml262(para) msgid "" "In the Floating IPs list, click " "Associate." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml270(para) msgid "" "The IP Address field is filled automatically, but you " "can add a new IP address by clicking the + button." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml277(para) msgid "" "In the Ports to be associated field, select a port from" " the list." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml280(para) msgid "The list shows all the instances with their fixed IP addresses." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml266(para) msgid "" "In the Manage Floating IP Associations dialog box, choose the following " "options: " msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml287(para) msgid "Click Associate." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml291(para) msgid "" "To disassociate an IP address from an instance, click the " "Disassociate button." msgstr "" #: ./doc/user-guide/section_dashboard_access_and_security.xml293(para) msgid "" "To release the floating IP address back into the pool of addresses, click " "the More button and select the Release " "Floating IP option." msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml6(title) msgid "Manage objects and containers" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml8(para) msgid "" "The OpenStack Object Storage Service provides the client, " "which is a command-line interface (CLI). Use this client to list objects and" " containers, upload objects to containers, and download or delete objects " "from containers. You can also gather statistics and update metadata for " "accounts, containers, and objects." msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml14(para) msgid "" "This client is based on the native swift client library, " "client.py, which seamlessly re-authenticates if the " "current token expires during processing, retries operations multiple times, " "and provides a processing concurrency of 10." msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml20(title) msgid "Create and manage containers" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml23(para) msgid "To create a container:" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml25(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml69(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml90(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml93(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml97(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml112(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml117(replaceable) msgid "CONTAINER" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml26(para) msgid "" "Replace CONTAINER with the name of your " "container." msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml27(para) msgid "" "Users have roles on accounts. For example, a user with the admin role has " "full access to all containers and objects in an account. You can set access " "control lists (ACLs) at the container level and support lists for read and " "write access, which you set with the X-Container-Read and" " X-Container-Write header, respectively." msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml34(para) msgid "" "To give a user read access, use the command with the " "-r parameter. To give a user write access, use the " "-w parameter." msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml38(para) msgid "" "The following example enables the testuser user to read " "objects in the container:" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml42(para) msgid "You can also use this command with a list of users." msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml43(para) msgid "" "If you use StaticWeb middleware to enable Object Storage to serve public web" " content, use .r:, followed by a list of allowed " "referrers." msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml46(para) msgid "The following command gives object access to all referring domains:" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml51(para) msgid "To list all containers:" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml56(para) msgid "To check the status of containers:" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml66(para) msgid "" "You can also use the command with the " "ACCOUNT or CONTAINER " "names as parameters." msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml85(title) msgid "Manage objects" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml88(para) msgid "To upload an object to a container:" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml90(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml93(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml97(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml112(replaceable) #: ./doc/user-guide/section_cli_swift_howto.xml117(replaceable) msgid "OBJECT_FILENAME" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml91(para) msgid "To upload in chunks, for large files:" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml93(replaceable) msgid "CHUNK_SIZE" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml96(para) msgid "To check the status of the object:" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml110(para) msgid "To list objects in a container:" msgstr "" #: ./doc/user-guide/section_cli_swift_howto.xml115(para) msgid "To download an object from a container:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml10(title) msgid "Store metadata on a configuration drive" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml11(para) msgid "" "You can configure OpenStack to write metadata to a special configuration " "drive that attaches to the instance when it boots. The instance can mount " "this drive and read files from it to get information that is normally " "available through the metadata service." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml18(para) msgid "" "One use case for the configuration drive is to pass a networking " "configuration when you do not use DHCP to assign IP addresses to instances. " "For example, you might pass the IP configuration for the instance through " "the configuration drive, which the instance can mount and access before you " "configure the network settings for the instance." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml24(para) msgid "" "Any modern guest operating system that is capable of mounting an ISO9660 or " "VFAT file system can use the configuration drive." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml28(title) msgid "Requirements and guidelines" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml30(title) msgid "Compute host requirements" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml32(para) msgid "" "The following hypervisors support the configuration drive: libvirt, " "xenserver, hyper-v, and vmware." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml37(para) msgid "" "To use configuration drive with libvirt, xenserver, or vmware, you must " "first install the genisoimage package on each compute " "host. Otherwise, instances do not boot properly." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml43(para) msgid "" "Use the mkisofs_cmd flag to set the path where you " "install the genisoimage program. If " "genisoimage is in same path as the nova-compute service, you do not need to set " "this flag." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml52(para) msgid "" "To use configuration drive with hyper-v, you must set the " "mkisofs_cmd value to the full path to an " "mkisofs.exe installation. Additionally, you must set the " "qemu_img_cmd value in the hyperv " "configuration section to the full path to an qemu-img " "command installation." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml65(title) msgid "Image requirements" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml67(para) msgid "" "An image built with a recent version of the cloud-init " "package can automatically access metadata passed through the configuration " "drive. The cloud-init package version 0.7.1 works with " "Ubuntu and Fedora-based images, such as RHEL." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml76(para) msgid "" "If an image does not have the cloud-init package " "installed, you must customize the image to run a script that mounts the " "configuration drive on boot, reads the data from the drive, and takes " "appropriate action such as adding the public key to an account. See for details on how data is organized on " "the configuration drive." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml88(para) msgid "" "If you use Xen with a configuration drive, use the " "xenapi_disable_agent configuration parameter to disable " "the agent." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml95(title) msgid "Guidelines" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml97(para) msgid "" "Do not rely on the presence of the EC2 metadata present in the configuration" " drive, as this content might be removed in a future release. For example, " "do not rely on files in the ec2 directory." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml104(para) msgid "" "When you create images that access configuration drive data and multiple " "directories are under the openstack directory, always " "select the highest API version by date that your consumer supports. For " "example, if your guest image supports the 2012-03-05, 2012-08-05, 2013-04-13" " versions, try 2013-04-13 first and fall back to a previous version if " "2013-04-13 is not present." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml117(title) msgid "Enable and access the configuration drive" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml120(para) msgid "" "To enable the configuration drive, pass the --config-" "drive=true parameter to the command." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml124(para) msgid "" "This example enables the configuration drive and passes user data, two " "files, and two key/value metadata pairs, all of which are accessible from " "the configuration drive:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml129(para) msgid "" "You can also configure the Compute service to always create a configuration " "drive." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml131(para) msgid "Set this option in the /etc/nova/nova.conf file:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml136(para) msgid "" "If a user passes the --config-drive=true flag to the " " command, an administrator cannot disable the configuration " "drive." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml144(para) msgid "" "The configuration drive has the config-2 volume label. If" " your guest operating system supports accessing disk by label, you can mount" " the configuration drive as the /dev/disk/by-" "label/config-2 device." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml151(para) msgid "For example:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml155(para) msgid "" "Make sure that you use at least version 0.3.1 of CirrOS for configuration " "drive support." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml158(para) msgid "" "If your guest operating system does not use udev, the " "/dev/disk/by-label directory is not present." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml162(para) msgid "" "You can use the command to identify the block device that " "corresponds to the configuration drive. For example, when you boot the " "CirrOS image with the m1.tiny flavor, the device is " "/dev/vdb:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml170(para) msgid "Once identified, you can mount the device:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml177(title) msgid "Configuration drive contents" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml178(para) msgid "In this example, the contents of the configuration drive are:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml191(para) msgid "" "The files that appear on the configuration drive depend on the arguments " "that you pass to the command." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml196(title) msgid "OpenStack metadata format" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml197(para) msgid "" "The following example shows the contents of the " "openstack/2012-08-10/meta_data.json and " "openstack/latest/meta_data.json files. These files are " "identical. The file contents are formatted for readability:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml204(para) msgid "" "Note the effect of the --file /etc/network/interfaces=/home/myuser" "/instance-interfaces argument that was passed to the " " command. The contents of this file are contained in the " "openstack/content/0000 file on the configuration drive," " and the path is specified as /etc/network/interfaces " "in the meta_data.json file." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml215(title) msgid "EC2 metadata format" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml216(para) msgid "" "The following example shows the contents of the ec2/2009-04-04" "/meta-data.json, latest/meta-data.json " "files. These files are identical. The file contents are formatted to improve" " readability:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml224(title) msgid "User data" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml225(para) msgid "" "The openstack/2012-08-10/user_data, " "openstack/latest/user_data, ec2/2009-04-04" "/user-data, and ec2/latest/user-data file " "are present only if the --user-data flag and the contents" " of the user data file are passed to the command." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml235(title) msgid "Configuration drive format" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml236(para) msgid "" "The default format of the configuration drive as an ISO 9660 file system. To" " explicitly specify the ISO 9660 format, add the following line to the " "/etc/nova/nova.conf file:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml242(para) msgid "" "By default, you cannot attach the configuration drive image as a CD drive " "instead of as a disk drive. To attach a CD drive, add this line to the " "/etc/nova/nova.conf file:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml248(para) msgid "" "For legacy reasons, you can configure the configuration drive to use VFAT " "format instead of ISO 9660. It is unlikely that you would require VFAT " "format because ISO 9660 is widely supported across operating systems. " "However, to use the VFAT format, add the following line to the " "/etc/nova/nova.conf file:" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml257(para) msgid "If you choose VFAT, the configuration drive is 64 MB." msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml262(title) msgid "Configuration drive reference" msgstr "" #: ./doc/user-guide/section_cli_nova_config-drive.xml263(para) msgid "" "The following table shows the configuration options for the configuration " "drive:" msgstr "" #: ./doc/user-guide/section_sdk_install.xml6(title) msgid "Install the OpenStack SDK" msgstr "" #: ./doc/user-guide/section_sdk_install.xml7(para) msgid "" "Each OpenStack project has its own Python library. These libraries are " "bundled with the command-line clients. For example, the Python bindings for " "the Compute API are bundled with the python-novaclient " "package." msgstr "" #: ./doc/user-guide/section_sdk_install.xml11(para) msgid "" "For details about how to install the clients, see install the OpenStack command-line " "clients." msgstr "" #: ./doc/user-guide/section_sdk_auth_neutron.xml6(title) msgid "Authenticate against a Networking endpoint" msgstr "" #: ./doc/user-guide/section_sdk_auth_neutron.xml7(para) msgid "" "To authenticate against a Networking endpoint, instantiate a " "neutronclient.v_2_0.client.Client object:" msgstr "" #: ./doc/user-guide/section_sdk_auth_neutron.xml18(para) msgid "" "You can also authenticate by explicitly specifying the endpoint and token:" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml6(title) msgid "Compute" msgstr "Compute" #: ./doc/user-guide/section_sdk_nova.xml8(para) msgid "" "To use the information in this section, you should have a general " "understanding of OpenStack Compute." msgstr "" #: ./doc/user-guide/section_sdk_nova.xml11(title) #: ./doc/user-guide/section_sdk_neutron.xml14(title) msgid "Set environment variables" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml12(para) msgid "" "Please see on how to setup environmental " "variables and authenticate against Compute API endpoints." msgstr "" #: ./doc/user-guide/section_sdk_nova.xml16(title) msgid "Get nova credentials v2" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml17(para) msgid "" "The examples in this section use the get_nova_credentials_v2 " "method:" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml27(para) #: ./doc/user-guide/section_sdk_neutron.xml35(para) #: ./doc/user-guide/section_sdk_neutron.xml53(para) msgid "" "This code resides in the credentials.py file, which all" " samples import." msgstr "" #: ./doc/user-guide/section_sdk_nova.xml30(para) msgid "" "Use the get_nova_credentials_v2() method to populate and get a " "dictionary:" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml36(title) msgid "List servers v2" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml37(para) msgid "The following program lists servers using the v2 APIs:" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml39(title) msgid "To list the servers" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml41(para) #: ./doc/user-guide/section_sdk_nova.xml83(para) #: ./doc/user-guide/section_sdk_nova.xml164(para) #: ./doc/user-guide/section_sdk_neutron.xml255(para) #: ./doc/user-guide/section_sdk_neutron.xml340(para) #: ./doc/user-guide/section_sdk_neutron.xml416(para) #: ./doc/user-guide/section_sdk_neutron.xml468(para) #: ./doc/user-guide/section_sdk_neutron.xml519(para) msgid "Import the following modules:" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml46(para) #: ./doc/user-guide/section_sdk_nova.xml89(para) #: ./doc/user-guide/section_sdk_nova.xml170(para) msgid "" "Get Nova Credentials. See ." msgstr "" #: ./doc/user-guide/section_sdk_nova.xml51(para) #: ./doc/user-guide/section_sdk_nova.xml94(para) #: ./doc/user-guide/section_sdk_nova.xml175(para) #: ./doc/user-guide/section_sdk_neutron.xml268(para) msgid "" "Instantiate the nova_client client object by using the " "credentials dictionary object:" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml59(para) msgid "" "Get the list of servers by calling servers.list on " "nova_client object:" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml65(title) msgid "List servers: complete code listing" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml78(title) msgid "Create a server v2" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml79(para) msgid "The following program creates a server (VM) using the v2 APIs:" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml81(title) msgid "To create a server" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml102(para) msgid "" "In this step, search for the flavor and image to be used for creating a " "server. The following code assumes cirros image and " "m1.tiny are being used." msgstr "" #: ./doc/user-guide/section_sdk_nova.xml114(para) msgid "" "In this step determine the network with which the server is going to be " "attached. Use this along with flavor and image to create the server." msgstr "" #: ./doc/user-guide/section_sdk_nova.xml123(para) msgid "" "Sleep for 5 secs and check if the server/vm got created by calling " "nova_client.servers.list()" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml133(title) msgid "Create server: complete code listing" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml159(title) msgid "Delete server v2" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml160(para) msgid "The following program deletes a Server (VM) using the v2 API:" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml162(title) msgid "To Delete a Server" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml183(para) msgid "" "Check if the server \"vm1\" exists using the following " "steps" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml185(para) msgid "Get the list of servers: servers_list" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml186(para) msgid "" "Iterate over the servers_list and compare name with " "\"vm1\" " msgstr "" #: ./doc/user-guide/section_sdk_nova.xml188(para) msgid "" "If true set the variable name server_exists as " "True and break from the for loop" msgstr "" #: ./doc/user-guide/section_sdk_nova.xml203(para) msgid "" "If the server exists execute delete method of " "nova_client.servers object." msgstr "" #: ./doc/user-guide/section_sdk_nova.xml210(title) msgid "Delete: complete code listing" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml8(title) msgid "Measure cloud resources" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml9(para) msgid "Telemetry measures cloud resources in OpenStack." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml11(para) msgid "" "It collects information about how much, who, what, and when with regards to " "billing. Currently, metering is available through only the " "command-line client." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml15(para) msgid "To model data, Telemetry uses these abstractions:" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml19(emphasis) msgid "Meter" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml21(para) msgid "" "Measures a specific aspect of resource usage, such as the existence of a " "running instance, or ongoing performance, such as the CPU utilization for an" " instance. Meters exist for each type of resource. For example, a separate " "cpu_util meter exists for each instance. The life cycle " "of a meter is decoupled from the existence of its related resource. The " "meter persists after the resource goes away." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml31(para) msgid "A meter has the following attributes:" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml34(para) msgid "String name." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml37(para) msgid "A unit of measurement." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml40(para) msgid "" "A type. Indicates whether values increase monotonically (cumulative), are " "interpreted as a change from the previous value (delta), or are standalone " "and relate only to the current duration (gauge)." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml51(emphasis) msgid "Sample" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml53(para) msgid "" "An individual data point that is associated with a specific meter. Has the " "same attributes as the meter, with the addition of timestamp and value " "attributes. The value attribute is also known as the sample volume." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml62(emphasis) msgid "Statistic" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml64(para) msgid "" "A set of data point aggregates over a time duration. (In contrast, a sample " "represents a single data point.) The Telemetry service employs these " "aggregation functions:" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml70(para) msgid "" "count. The number of samples in each " "period." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml75(para) msgid "" "max. The maximum number of sample volumes" " in each period." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml80(para) msgid "" "min. The minimum number of sample volumes" " in each period." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml85(para) msgid "" "avg. The average of sample volumes over " "each period." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml90(para) msgid "" "sum. The sum of sample volumes over each " "period." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml98(emphasis) msgid "Alarm" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml100(para) msgid "" "A set of rules that define a monitor and a current state, with edge-" "triggered actions associated with target states. Provides user-oriented " "Monitoring-as-a-Service and a general purpose utility for OpenStack. " "Orchestration auto scaling is a typical use-case. Alarms follow a tristate " "model of ok, alarm, and " "insufficient data. For conventional threshold-oriented " "alarms, a static threshold value and comparison operator govern state " "transitions. The comparison operator compares a selected meter statistic " "against an evaluation window of configurable length into the recent past." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml119(para) msgid "" "This example uses the client to create an auto-scaling " "stack and the client to measure resources." msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml125(para) msgid "Create an auto-scaling stack:" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml129(para) msgid "List the heat resources that were created:" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml146(para) msgid "List the alarms that are set:" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml156(para) msgid "List the meters that are set:" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml167(para) msgid "List samples:" msgstr "" #: ./doc/user-guide/section_cli_ceilometer.xml176(para) msgid "View statistics:" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml6(title) msgid "Manage IP addresses" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml7(para) msgid "" "Each instance can have a private, or fixed, IP address and a public, or " "floating, one." msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml9(para) msgid "" "Private IP addresses are used for communication between instances, and " "public ones are used for communication with networks outside the cloud, " "including the Internet." msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml12(para) msgid "" "When you launch an instance, it is automatically assigned a private IP " "address that stays the same until you explicitly terminate the instance. " "Rebooting an instance has no effect on the private IP address." msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml16(para) msgid "" "A pool of floating IP addresses, configured by the cloud operator, is " "available in OpenStack Compute. You can allocate a certain number of these " "IP addresses to a project. The maximum number of floating IP addresses per " "project is defined by the quota." msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml20(para) msgid "" "After you allocate floating IP addresses to a project, you can add a " "floating IP address from this set to an instance of the project. You can " "assign a floating IP address to one instance at a time. Floating IP " "addresses can be disassociated from an instance and associated with another " "instance of the same project at any time." msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml26(title) msgid "List floating IP address information" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml29(para) msgid "To list all floating IP addresses, run the following command:" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml58(para) msgid "" "To list all pools that provide floating IP addresses, run the following " "command:" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml71(title) msgid "Assign floating IP addresses" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml72(para) msgid "You can assign floating IP addresses to a project and to an instance." msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml76(para) msgid "" "Run the following command to allocate a floating IP address to the current " "project. If more than one IP address pool is available, you can specify the " "pool from which to allocate the IP address. This example specifies the " "public pool:" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml89(para) msgid "" "After at least one floating IP address is allocated to the project, assign " "an IP address to an instance in the project, as follows:" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml92(replaceable) #: ./doc/user-guide/section_cli_nova_floating_ips.xml102(replaceable) msgid "INSTANCE_NAME_OR_ID" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml92(replaceable) #: ./doc/user-guide/section_cli_nova_floating_ips.xml102(replaceable) #: ./doc/user-guide/section_cli_nova_floating_ips.xml107(replaceable) msgid "FLOATING_IP" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml93(para) msgid "" "After you assign the IP address and configure security group rules for the " "instance, the instance is publicly available at the floating IP address." msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml99(para) msgid "" "To remove a floating IP address from an instance, specify the same arguments" " that you used to assign the IP address, but run the following command:" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml105(para) msgid "" "To release a floating IP address from the current project, run the following" " command:" msgstr "" #: ./doc/user-guide/section_cli_nova_floating_ips.xml108(para) msgid "" "The IP address is returned to the pool of IP addresses that are available " "for all projects. If an IP address is assigned to a running instance, it is " "disassociated from the instance." msgstr "" #: ./doc/user-guide/section_sdk_auth_glance.xml6(title) msgid "Authenticate against an Image Service endpoint" msgstr "" #: ./doc/user-guide/section_sdk_auth_glance.xml7(para) msgid "" "To authenticate against an Image Service endpoint, instantiate a " " glanceclient.v2.client.Client object:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml6(title) #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml206(guilabel) msgid "Networking" msgstr "Síťování" #: ./doc/user-guide/section_sdk_neutron.xml8(para) msgid "" "To use the information in this section, you should have a general " "understanding of OpenStack Networking, OpenStack Compute, and the " "integration between the two. You should also have access to a plug-in that " "implements the Networking API v2.0." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml15(para) msgid "Make sure that you set the relevant environment variables." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml17(para) msgid "" "As an example, see the sample shell file that sets these variables to get " "credentials:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml20(replaceable) msgid "password" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml22(replaceable) msgid "IPADDRESS" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml25(title) msgid "Get credentials" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml26(para) msgid "" "The examples in this section use the get_credentials method:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml38(para) msgid "" "Use the get_credentials() method to populate and get a " "dictionary:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml43(title) msgid "Get nova credentials" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml44(para) msgid "" "Few examples in this section use the get_nova_credentials " "method:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml56(para) msgid "" "Use the get_nova_credentials() method to populate and get a " "dictionary:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml62(title) msgid "Print values" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml63(para) msgid "" "The examples in this section use the print_values and " "print_values_server methods:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml94(para) msgid "" "This code resides in the utils.py file, which all " "samples import." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml98(title) msgid "Create network" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml99(para) msgid "The following program creates a network:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml127(title) msgid "List networks" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml128(para) msgid "The following program lists networks:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml141(para) #: ./doc/user-guide/section_sdk_neutron.xml204(para) #: ./doc/user-guide/section_sdk_neutron.xml438(para) msgid "" "For print_values see ." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml146(title) msgid "Create ports" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml147(para) msgid "The following program creates a port:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml180(para) msgid "" "For get_nova_credentials see ." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml183(para) #: ./doc/user-guide/section_sdk_neutron.xml201(para) msgid "" "For get_credentials see ." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml188(title) msgid "List ports" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml189(para) msgid "The following program lists ports:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml209(title) msgid "List server ports" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml210(para) msgid "The following program lists the ports for a server:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml248(title) msgid "Create router and add port to subnet" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml249(para) msgid "" "This example queries OpenStack Networking to create a router and add a port " "to a subnet." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml252(title) msgid "To create a router and add a port to a subnet" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml263(para) msgid "" "Get Nova Credentials. See ." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml275(para) msgid "Create a router and add a port to the subnet:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml299(title) msgid "Create router: complete code listing" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml334(title) msgid "Delete a network" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml335(para) msgid "This example queries OpenStack Networking to delete a network." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml338(title) msgid "To delete a network" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml345(para) #: ./doc/user-guide/section_sdk_neutron.xml422(para) #: ./doc/user-guide/section_sdk_neutron.xml474(para) #: ./doc/user-guide/section_sdk_neutron.xml525(para) msgid "Get credentials. See ." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml350(para) #: ./doc/user-guide/section_sdk_neutron.xml427(para) #: ./doc/user-guide/section_sdk_neutron.xml479(para) #: ./doc/user-guide/section_sdk_neutron.xml530(para) msgid "" "Instantiate the neutron client object by using the " "credentials dictionary object:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml357(para) msgid "Delete the network:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml379(title) msgid "Delete network: complete code listing" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml410(title) msgid "List routers" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml411(para) msgid "This example queries OpenStack Networking to list all routers." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml414(title) msgid "To list routers" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml434(para) msgid "List the routers" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml444(title) msgid "List routers: complete code listing" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml462(title) msgid "List security groups" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml463(para) msgid "This example queries OpenStack Networking to list security groups." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml466(title) msgid "To list security groups" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml486(para) msgid "List Security groups" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml492(title) msgid "List security groups: complete code listing" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml506(para) msgid "" "OpenStack Networking security groups are case-sensitive while the " "nova-network security groups are " "case-insensitive." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml513(title) msgid "List subnets" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml514(para) msgid "This example queries OpenStack Networking to list subnets." msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml517(title) msgid "To list subnets" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml537(para) msgid "List subnets:" msgstr "" #: ./doc/user-guide/section_sdk_neutron.xml543(title) msgid "List subnets: complete code listing" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml12(title) msgid "Launch and manage stacks" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml14(para) msgid "" "OpenStack Orchestration is a service that you can use to orchestrate " "multiple composite cloud applications. This service supports use of both the" " Amazon Web Services (AWS) CloudFormation template format through both a " "Query API that is compatible with CloudFormation and the native OpenStack " "Heat Orchestration Template (HOT) format through a " "REST API." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml22(para) msgid "" "These flexible template languages enable application developers to describe " "and automate the deployment of infrastructure, services, and applications. " "The templates enable creation of most OpenStack resource types, such as " "instances, floating IP addresses, volumes, security groups, and users. The " "resources, once created, are referred to as stacks." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml36(title) msgid "Launch a stack" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml39(para) msgid "" "Log in to the dashboard, choose a project, and click " "Stacks in the Orchestration " "category on the Projects tab." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml45(para) msgid "Click Launch Stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml50(para) msgid "" "In the Select Template dialog box, choose the source of the template from " "the list." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml54(para) msgid "" "Depending on the source that you selected, enter the URL, browse to the file" " location, or directly include the template." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml59(para) msgid "In the Launch Stack dialog box, specify the following values." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml66(guilabel) msgid "Stack Name" msgstr "Název zásobníku" #: ./doc/user-guide/section_dashboard_stacks.xml68(para) msgid "Enter a name to identify the stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml71(guilabel) msgid "Creation Timeout (minutes)" msgstr "Časový limit vytvoření (v minutách)" #: ./doc/user-guide/section_dashboard_stacks.xml73(para) msgid "" "Specify the number of minutes that can elapse before the launch of the stack" " times out." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml77(guilabel) msgid "Rollback On Failure" msgstr "Zpětné vrácení při selhání" #: ./doc/user-guide/section_dashboard_stacks.xml79(para) msgid "" "Select this check box if you want if you want the service to roll back " "changes if the stack fails to launch." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml84(guilabel) msgid "Password for user \"demo\"" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml86(para) msgid "" "Specify the password that the default user will use when the stack is " "created." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml90(guilabel) msgid "DBUsername" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml91(para) msgid "Specify the name of the database user." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml94(guilabel) msgid "LinuxDistribution" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml95(para) msgid "Specify the Linux distribution that will be used in the stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml99(guilabel) msgid "DBRootPassword" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml100(para) msgid "Specify the root password for the database." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml103(guilabel) msgid "KeyName" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml104(para) msgid "" "Specify the name of the key pair that will be used to log into the stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml108(guilabel) msgid "DBName" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml109(para) msgid "Specify the name of the database." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml112(guilabel) msgid "DBPassword" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml113(para) msgid "Specify the password for the database." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml116(guilabel) msgid "InstanceType" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml117(para) msgid "Specify the flavor for the instance." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml123(para) msgid "Click Launch to create a stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml127(para) msgid "The dashboard shows the stack on the Stacks tab." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml131(para) msgid "" "After the stack is created, click on the stack name to see the following " "details:" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml135(guilabel) msgid "Topology" msgstr "Topologie" #: ./doc/user-guide/section_dashboard_stacks.xml137(para) msgid "The topology of the stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml141(guilabel) msgid "Overview" msgstr "Přehled" #: ./doc/user-guide/section_dashboard_stacks.xml143(para) msgid "The parameters and details of the stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml148(guilabel) msgid "Resources" msgstr "Zdroje" #: ./doc/user-guide/section_dashboard_stacks.xml150(para) msgid "The resources used by the stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml154(guilabel) msgid "Events" msgstr "Události" #: ./doc/user-guide/section_dashboard_stacks.xml156(para) msgid "The events related to the stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml162(title) msgid "Delete a stack" msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml163(para) msgid "When you delete a stack, you cannot undo this action." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml167(para) msgid "" "Log in to the dashboard, choose a project, and click " "Stacks." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml171(para) msgid "Select the stack that you want to delete." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml174(para) msgid "Click Delete Stack." msgstr "" #: ./doc/user-guide/section_dashboard_stacks.xml178(para) msgid "" "In the confirmation dialog box, click Delete Stack to" " confirm the deletion." msgstr "" #: ./doc/user-guide/section_sdk_authenticate.xml5(title) msgid "Authenticate" msgstr "" #: ./doc/user-guide/section_sdk_authenticate.xml6(para) msgid "" "You must authenticate against an OpenStack endpoint before you can use " "OpenStack services. Each project uses a slightly different syntax for " "authentication." msgstr "" #: ./doc/user-guide/section_sdk_authenticate.xml9(para) msgid "" "You must typically authenticate against a specific version of a service. For" " example, a client might need to authenticate against Identity v2.0." msgstr "" #: ./doc/user-guide/section_sdk_authenticate.xml12(para) msgid "" "Python scripts that use the OpenStack SDK must have access to the " "credentials contained in the OpenStack RC " "file. Because credentials are sensitive information, do not include " "them in your scripts. This guide assumes that users source the " "PROJECT-openrc.sh file and " "access the credentials by using the environment variables in the Python " "scripts." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml6(title) msgid "Upload and manage images" msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml7(para) msgid "" "A virtual machine image, referred to in this document simply as an image, is" " a single file that contains a virtual disk that has a bootable operating " "system installed on it. Images are used to create virtual machine instances " "within the cloud. For information about creating image files, see the OpenStack" " Virtual Machine Image Guide." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml15(para) msgid "" "Depending on your role, you may have permission to upload and manage virtual" " machine images. Operators might restrict the upload and management of " "images to cloud administrators or operators only. If you have the " "appropriate privileges, you can use the dashboard to upload and manage " "images in the admin project." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml22(para) msgid "" "You can also use the and command-line " "clients or the Image Service and Compute APIs to manage images. See ." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml29(para) msgid "Follow this procedure to upload an image to a project." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml33(para) #: ./doc/user-guide/section_dashboard_manage_images.xml159(para) #: ./doc/user-guide/section_dashboard_manage_images.xml206(para) msgid "Log in to the dashboard." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml36(para) #: ./doc/user-guide/section_dashboard_manage_images.xml162(para) #: ./doc/user-guide/section_dashboard_manage_images.xml209(para) msgid "" "From the CURRENT PROJECT on the " "Project tab, select the appropriate project." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml41(para) #: ./doc/user-guide/section_dashboard_manage_images.xml167(para) #: ./doc/user-guide/section_dashboard_manage_images.xml213(para) msgid "" "On the Project tab, click Images." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml45(para) #: ./doc/user-guide/section_dashboard_manage_images.xml148(para) msgid "Click Create Image." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml46(para) msgid "The Create An Image dialog box appears." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml49(para) msgid "Enter the following values:" msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml56(guilabel) msgid "Name" msgstr "Jméno" #: ./doc/user-guide/section_dashboard_manage_images.xml59(para) msgid "Enter a name for the image." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml67(para) msgid "Optionally, enter a brief description of the image." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml73(guilabel) msgid "Image Source" msgstr "Zdroj obrazu" #: ./doc/user-guide/section_dashboard_manage_images.xml76(para) msgid "" "Choose the image source from the list. Your choices are Image " "Location and Image File." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml83(para) msgid "Image File or Image Location" msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml88(para) msgid "" "Based on your selection for Image Source, you either " "enter the location URL of the image in the Image " "Location field. or browse to the image file on your system and " "add it." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml97(guilabel) msgid "Format" msgstr "Formátovat" #: ./doc/user-guide/section_dashboard_manage_images.xml100(para) msgid "Select the correct format (for example, QCOW2) for the image." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml107(guilabel) msgid "Architecture" msgstr "Architektura" #: ./doc/user-guide/section_dashboard_manage_images.xml111(para) msgid "" "Specify the architecture. For example, i386 for a 32-bit " "architecture or x86-64 for a 64-bit architecture." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml118(para) msgid "" "Minimum Disk (GB) and Minimum RAM " "(MB)" msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml122(para) msgid "Leave these optional fields empty." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml127(guilabel) msgid "Public" msgstr "Veřejné" #: ./doc/user-guide/section_dashboard_manage_images.xml130(para) msgid "" "Select this check box to make the image public to all users with access to " "the current project." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml137(guilabel) msgid "Protected" msgstr "Chráněno" #: ./doc/user-guide/section_dashboard_manage_images.xml140(para) msgid "" "Select this check box to ensure that only users with permissions can delete " "the image." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml149(para) msgid "" "The image is queued to be uploaded. It might take some time before the " "status changes from Queued to Active." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml155(title) msgid "Update an image" msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml156(para) msgid "Follow this procedure to update an existing image." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml171(para) msgid "Select the image that you want to edit." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml174(para) msgid "" "In the Actions column, click More " "and then select Edit from the list." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml182(para) msgid "Change the name of the image." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml185(para) msgid "" "Select the Public check box to make the image public." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml189(para) msgid "" "Clear the Public check box to make the image private." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml179(para) msgid "" "In the Update Image dialog box, you can perform the following actions: " "" msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml195(para) msgid "Click Update Image." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml200(title) msgid "Delete an image" msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml201(para) msgid "" "Deletion of images is permanent and cannot be reversed. Only users with the appropriate" " permissions can delete images." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml217(para) msgid "Select the images that you want to delete." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml220(para) msgid "Click Delete Images." msgstr "" #: ./doc/user-guide/section_dashboard_manage_images.xml223(para) msgid "" "In the Confirm Delete Image dialog box, click " "Delete Images to confirm the deletion." msgstr "" #: ./doc/user-guide/ch_cli.xml10(title) msgid "OpenStack command-line clients" msgstr "" #: ./doc/user-guide/section_sdk_auth_nova.xml6(title) msgid "Authenticate against a Compute endpoint" msgstr "" #: ./doc/user-guide/section_sdk_auth_nova.xml7(para) msgid "" "To authenticate against a Compute endpoint, instantiate a " "novaclient.v_1_1.client.Client object:" msgstr "" #: ./doc/user-guide/section_sdk_auth_nova.xml18(para) msgid "" "Alternatively, you can instantiate a " "novaclient.client.Client object and pass the version " "number:" msgstr "" #: ./doc/user-guide/section_sdk_auth_nova.xml28(para) msgid "" "If you authenticate against an endpoint that uses a custom authentication " "back-end, you must load the authentication plug-in and pass it to the " "constructor." msgstr "" #: ./doc/user-guide/section_sdk_auth_nova.xml31(para) msgid "" "The Rackspace public cloud is an OpenStack deployment that uses a custom " "authentication back end. To authenticate against this cloud, you must " "install the rackspace-novaclient library that contains the " "Rackspace authentication plug-in, called rackspace. The " "following Python code shows the additional modifications required to " "instantiate a Client object that can authenticate " "against the Rackspace custom authentication back end." msgstr "" #: ./doc/user-guide/section_sdk_auth_nova.xml53(para) msgid "" "If you set the OS_AUTH_SYSTEM environment variable, check" " for this variable in your Python script to determine whether you need to " "load a custom authentication back end:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml9(title) msgid "Add a keypair" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml10(para) msgid "" "To generate a keypair, call the novaclient.v1_1.keypairs.KeypairManager.create" " method:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml20(para) msgid "The Python script output looks something like this:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml28(para) msgid "" "You typically write the private key to a file to use it later. The file must" " be readable and writeable by only the file owner, otherwise the ssh client " "will refuse to read the private key file. It is safest to create the file " "with the appropriate permissions, as shown in the following example:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml46(title) msgid "Import a keypair" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml47(para) msgid "" "If you have already generated a keypair with the public key located at " "~/.ssh/id_rsa.pub, pass the contents of the file to the" " " " novaclient.v1_1.keypairs.KeypairManager.create method " "to import the public key to Compute:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml61(title) msgid "List keypairs" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml62(para) msgid "" "To list keypairs, call the novaclient.v1_1.keypairs.KeypairManager.list" " method:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml70(title) #: ./doc/user-guide/section_cli_nova_configure_instances.xml120(title) msgid "Create and manage security groups" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml71(para) msgid "" "To list security groups for the current project, call the novaclient.v_1.security_groups.SecurityGroupManager.list" " method:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml76(para) msgid "" "To create a security group with a specified name and description, call the " "novaclient.v_1.security_groups.SecurityGroupManager.create" " method:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml81(para) msgid "" "To delete a security group, call the " " " "novaclient.v_1.security_groups.SecurityGroupManager.delete" " method, passing either a novaclient.v1_1.security_groups.SecurityGroup" " object or group ID as an argument:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml95(title) #: ./doc/user-guide/section_cli_nova_configure_instances.xml147(title) msgid "Create and manage security group rules" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml96(para) msgid "" "Access the security group rules from the rules attribute " "of a novaclient.v1_1.security_groups.SecurityGroup" " object:" msgstr "" #: ./doc/user-guide/section_sdk_configure_instances.xml102(para) msgid "" "To add a rule, to a security group, call the novaclient.v1_1.security_group_rules.SecurityGroupRuleManager.create" " method:" msgstr "" #: ./doc/user-guide/section_cli_nova_manage_instances.xml6(title) msgid "Manage instances and hosts" msgstr "" #: ./doc/user-guide/section_cli_nova_manage_instances.xml7(para) msgid "" "Instances are virtual machines that run inside the cloud on physical compute" " nodes. The Compute service manages instances. A host is the node on which a" " group of instances resides." msgstr "" #: ./doc/user-guide/section_cli_nova_manage_instances.xml11(para) msgid "" "This section describes how to perform the different tasks involved in " "instance management, such as adding floating IP addresses, stopping and " "starting instances, and terminating instances. This section also discusses " "node management tasks." msgstr "" #: ./doc/user-guide/section_sdk_auth_keystone.xml6(title) msgid "Authenticate against an Identity endpoint" msgstr "" #: ./doc/user-guide/section_sdk_auth_keystone.xml7(para) msgid "" "To authenticate against the Identity v2.0 endpoint, instantiate a " " keystoneclient.v_20.client.Client object:" msgstr "" #: ./doc/user-guide/section_sdk_auth_keystone.xml18(para) msgid "" "After you instantiate a Client object, you can " "retrieve the token by accessing its auth_token attribute " "object:" msgstr "" #: ./doc/user-guide/section_sdk_auth_keystone.xml24(para) msgid "" "If the OpenStack cloud is configured to use public-key infrastructure (PKI) " "tokens, the Python script output looks something like this:" msgstr "" #: ./doc/user-guide/section_sdk_auth_keystone.xml35(para) msgid "" "This example shows a subset of a PKI token. A complete token is over 5000 " "characters long." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml12(title) msgid "Launch and manage instances" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml13(para) msgid "Instances are virtual machines that run inside the cloud." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml15(para) msgid "" "You can launch an " "instance from the following sources:" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml18(para) msgid "" "Images uploaded to the OpenStack Image Service, as described in ." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml20(para) msgid "" "Image that you have copied to a persistent volume. The instance launches " "from the volume, which is provided by the cinder-volume API through iSCSI." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml29(title) msgid "Connect to your instance by using SSH" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml30(para) msgid "" "To use SSH to connect to your instance, you use the downloaded keypair file." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml33(para) msgid "" "The user name is ubuntu for the Ubuntu cloud images on " "TryStack." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml38(para) msgid "Copy the IP address for your instance." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml41(para) msgid "" "Use the command to make a secure connection to the " "instance. For example:" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml47(para) msgid "At the prompt, type yes." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml53(title) msgid "Track usage for instances" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml54(para) msgid "" "You can track usage for instances for each project. You can track costs per " "month by showing metrics like number of vCPUs, disks, RAM, and uptime for " "all your instances." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml60(para) msgid "" "Log in to the dashboard, choose a project, and click " "Overview." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml64(para) msgid "" "To query the instance usage for a month, select a month and click " "Submit." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml69(para) msgid "" "To download a summary, click Download CSV Summary." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml75(title) msgid "Create an instance snapshot" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml78(para) #: ./doc/user-guide/section_dashboard_launch_instances.xml110(para) msgid "" "Log in to the dashboard, choose a project, and click " "Instances." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml82(para) msgid "Select the instance from which to create a snapshot." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml85(para) msgid "" "From the Actions list, select Create " "Snapshot." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml90(para) msgid "" "In the Create Snapshot dialog box, enter a name for the snapshot, and then " "click Create Snapshot." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml93(para) msgid "" "The Images & Snapshots category shows the instance " "snapshot." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml98(para) msgid "" "To launch an instance from the snapshot, select the snapshot and click " "Launch. Proceed with ." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml107(title) msgid "Manage an instance" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml114(para) msgid "Select an instance." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml117(para) msgid "" "In the More list in the Actions " "column, select the state." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances.xml120(para) msgid "" "You can resize or rebuild an instance. You can also choose to view the " "instance console log. Depending on the current state of the instance, you " "can pause, resume, suspend, soft or hard reboot, or terminate it." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml12(title) msgid "Launch an instance" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml14(para) msgid "" "When you launch an instance from an image, OpenStack creates a local copy of" " the image on the compute node where the instance starts." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml16(para) msgid "When you launch an instance from a volume, note the following steps:" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml20(para) msgid "" "To select the volume to from which to launch, launch an instance from an " "arbitrary image on the volume. The image that you select does not boot. " "Instead, it is replaced by the image on the volume that you choose in the " "next steps." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml24(para) msgid "" "To boot a Xen image from a volume, the image you launch in must be the same " "type, fully virtualized or paravirtualized, as the one on the volume." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml29(para) msgid "" "Select the volume or volume snapshot from which to boot. Enter a device " "name. Enter vda for KVM images or xvda" " for Xen images." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml36(para) msgid "" "Log in to the dashboard, choose a project, and click Images & " "Snapshot." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml38(para) msgid "" "The dashboard shows the images that have been uploaded to OpenStack Image " "Service and are available for this project." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml41(para) msgid "" "For details on creating images, see Creating images " "manually in the OpenStack Virtual Machine Image " "Guide." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml47(para) msgid "Select an image and click Launch." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml51(para) msgid "In the Launch Instance dialog box, specify the following values:" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml59(guilabel) msgid "Details" msgstr "Podrobnosti" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml64(guilabel) msgid "Availability Zone" msgstr "Zóna dostupnosti" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml67(para) msgid "" "By default, this value is set to the availability zone given by the cloud " "provider (for example, us-west or apac-" "south). For most cases, it could be nova." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml76(guilabel) msgid "Instance Name" msgstr "Název instance" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml77(para) msgid "Assign a name to the virtual machine." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml79(para) msgid "" "The name you assign here becomes the initial host name of the server. After " "the server is built, if you change the server name in the API or change the " "host name directly, the names are not updated in the dashboard." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml85(para) msgid "" "Server names are not guaranteed to be unique when created so you could have " "two instances with the same host name." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml93(guilabel) msgid "Flavor" msgstr "Konfigurace" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml94(para) msgid "Specify the size of the instance to launch." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml98(guilabel) msgid "Instance Count" msgstr "Počet instancí" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml100(para) msgid "" "To launch multiple instances, enter a value greater than 1. The default is " "1." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml106(guilabel) msgid "Instance Boot Source" msgstr "Zdroj zavedení instance" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml109(para) msgid "Your options are:" msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml112(para) msgid "" "Boot from image—If you choose this option, a new field " "for Image Name displays. You can select the image from " "the list." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml121(para) msgid "" "Boot from snapshot—If you choose this option, a new " "field for Instance Snapshot displays. You can select " "the snapshot from the list." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml130(para) msgid "" "Boot from volume—If you choose this option, a new field" " for Volume displays. You can select the volume from " "the list." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml139(para) msgid "" "Boot from image (creates a new volume) —With this " "option, you can boot from an image and create a volume by entering the " "Device Size and Device Name for " "your volume." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml149(para) msgid "" "Boot from volume snapshot (creates a new volume)— Using" " this option, you can boot from a volume snapshot and create a new volume by" " choosing Volume Snapshot from a list and adding a " "Device Name for your volume." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml160(para) msgid "" "Since you are launching an instance from an image, Boot from " "image is chosen by default." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml168(guilabel) msgid "Image Name" msgstr "Název obrazu" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml172(para) msgid "" "This field changes based on your previous selection. Since you have chosen " "to launch an instance using an image, the Image Name " "field displays. Select the image name from the dropdown list." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml180(guilabel) msgid "Access & Security" msgstr "Přístup a zabezpečení" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml184(guilabel) msgid "Keypair" msgstr "Pár klíčů" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml185(para) msgid "Specify a key pair." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml186(para) msgid "" "If the image uses a static root password or a static key set (neither is " "recommended), you do not need to provide a key pair to launch the instance." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml192(guilabel) msgid "Security Groups" msgstr "Bezpečnostní skupiny" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml194(para) msgid "Activate the security groups that you want to assign to the instance." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml196(para) msgid "" "Security groups are a kind of cloud firewall that define which incoming " "network traffic is forwarded to instances. For details, see ." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml200(para) msgid "" "If you have not created any security groups, you can assign only the default" " security group to the instance." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml209(guilabel) msgid "Selected Networks" msgstr "Vybrané sítě" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml211(para) msgid "" "To add a network to the instance, click the + in the " "Available Networks field." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml218(guilabel) msgid "Post-Creation" msgstr "Po vytvoření" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml221(guilabel) msgid "Customization Script" msgstr "Skript přizpůsobení" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml223(para) msgid "Specify a customization script that runs after your instance launches." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml230(para) msgid "Click Launch." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml231(para) msgid "The instance starts on a compute node in the cloud." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml234(para) msgid "" "The Instances tab shows the instance's name, its " "private and public IP addresses, size, status, task, and power state." msgstr "" #: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml237(para) msgid "" "If you did not provide a key pair, security groups, or rules, users can " "access the instance only from inside the cloud through VNC. Even pinging the" " instance is not possible without an ICMP rule configured. To access the " "instance through a VNC console, see ." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml6(title) msgid "Create and manage object containers" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml8(para) msgid "" "OpenStack Object Storage provides a distributed, API-accessible storage " "platform that can be integrated directly into an application or used to " "store any type of file, including VM images, backups, archives, or media " "files. In the OpenStack Dashboard, you can only manage containers and " "objects." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml13(para) msgid "" "In OpenStack Object Storage, containers provide storage for objects in a " "manner similar to a Windows folder or Linux file directory, though they " "cannot be nested. An object in OpenStack consists of the file to be stored " "in the container and any accompanying metadata." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml19(title) msgid "Create a container" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml22(para) msgid "" "Log in to the dashboard, choose a project, and click " "Containers." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml26(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml34(para) msgid "Click Create Container." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml29(para) msgid "" "In the Create Container dialog box, enter a name for " "the container, choose if you want the access to be " "Private or Public." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml37(para) msgid "You have successfully created a container." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml38(para) msgid "" "To delete a container, click the More button and " "select Delete Container." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml44(title) msgid "Upload an object" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml47(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml80(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml108(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml162(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml191(para) msgid "" "Log in to the dashboard, choose a project, and click " "Containers in the Object Store " "tab." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml52(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml85(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml113(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml167(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml196(para) msgid "Select the container in which you want to store your object." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml55(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml70(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml170(para) msgid "Click Upload Object." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml56(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml171(para) msgid "" "The Upload Object To Container: " "<name> dialog box is displayed. " "<name> is the name of the container to " "which you are uploading the object." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml63(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml182(para) msgid "Enter a name for the object." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml66(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml94(para) msgid "Browse to and select the file that you want to upload." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml71(para) msgid "You have successfully uploaded an object to the container." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml76(title) msgid "Manage an object" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml78(title) msgid "Edit an object" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml88(para) msgid "" "Click More and choose Edit from" " the dropdown list." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml90(para) msgid "The Edit Object dialog box is displayed." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml98(para) #: ./doc/user-guide/section_dashboard_manage_containers.xml185(para) msgid "Click Update Object." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml102(para) msgid "" "To delete an object, click the More button and select" " Delete Object." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml106(title) msgid "Copy an object from one container to another" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml116(para) msgid "" "Click More and choose Copy from" " the dropdown list." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml120(para) msgid "" "In the Copy Object: launch dialog box, enter or select " "the following values:" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml128(guilabel) msgid "Destination Container" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml131(para) msgid "Choose the destination container from the dropdown list." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml137(guilabel) msgid "Path" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml140(para) msgid "" "Specify a path at which the new copy should be stored inside of the selected" " container." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml146(guilabel) msgid "Destination object name" msgstr "Cílový název objektu" #: ./doc/user-guide/section_dashboard_manage_containers.xml149(para) msgid "Enter a name for the object in the new container." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml156(para) msgid "Click Copy Object." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml160(title) msgid "Create a metadata only object without a file" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml176(para) msgid "" "You can create a new object in container without a file available and can " "upload the file later when it is ready. This works like a place-holder for a" " new object to allow user to flexibly share object metadata and URL info in " "advance." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml189(title) msgid "Create a pseudo-folder" msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml199(para) msgid "Click Create Pseudo-folder." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml200(para) msgid "" "The Create pseudo-folder in container <name> " " dialog box is displayed. <name>" " is the name of the container to which you are uploading the " "object." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml206(para) msgid "Enter a name for the pseudo-folder." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml207(para) msgid "" "Pseudo-folders behave similarly to folders in your desktop operating system," " with the exception that they are virtual collections defined by a common " "prefix on the object's name." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml210(para) msgid "" "A slash (/) character is used as the delimiter for pseudo-folders in the " "Object Store." msgstr "" #: ./doc/user-guide/section_dashboard_manage_containers.xml214(para) msgid "Click Create." msgstr "" #: ./doc/user-guide/bk-user-guide.xml12(title) msgid "OpenStack End User Guide" msgstr "" #: ./doc/user-guide/bk-user-guide.xml13(titleabbrev) msgid "End User Guide" msgstr "" #: ./doc/user-guide/bk-user-guide.xml21(orgname) #: ./doc/user-guide/bk-user-guide.xml26(holder) msgid "OpenStack Foundation" msgstr "OpenStack Foundation" #: ./doc/user-guide/bk-user-guide.xml25(year) msgid "2014" msgstr "" #: ./doc/user-guide/bk-user-guide.xml28(releaseinfo) msgid "current" msgstr "" #: ./doc/user-guide/bk-user-guide.xml29(productname) msgid "OpenStack" msgstr "OpenStack" #: ./doc/user-guide/bk-user-guide.xml33(remark) msgid "Copyright details are filled in by the template." msgstr "Copyright údaje jsou vyplněny z šablony." #: ./doc/user-guide/bk-user-guide.xml38(para) msgid "" "OpenStack is an open-source cloud computing platform for public and private " "clouds. A series of interrelated projects deliver a cloud infrastructure " "solution. This guide shows OpenStack end users how to create and manage " "resources in an OpenStack cloud with the OpenStack dashboard and OpenStack " "client commands." msgstr "" #: ./doc/user-guide/bk-user-guide.xml48(date) msgid "2014-01-31" msgstr "" #: ./doc/user-guide/bk-user-guide.xml52(para) msgid "" "Removed the command reference appendix. This information is now in the OpenStack Command-Line Interface " "Reference." msgstr "" #: ./doc/user-guide/bk-user-guide.xml62(date) msgid "2013-12-30" msgstr "" #: ./doc/user-guide/bk-user-guide.xml66(para) msgid "Added the OpenStack Python SDK chapter." msgstr "" #: ./doc/user-guide/bk-user-guide.xml73(date) msgid "2013-10-17" msgstr "" #: ./doc/user-guide/bk-user-guide.xml77(para) msgid "Havana release." msgstr "" #: ./doc/user-guide/bk-user-guide.xml83(date) msgid "2013-08-19" msgstr "" #: ./doc/user-guide/bk-user-guide.xml87(para) msgid "Editorial changes." msgstr "" #: ./doc/user-guide/bk-user-guide.xml93(date) msgid "2013-07-29" msgstr "" #: ./doc/user-guide/bk-user-guide.xml97(para) msgid "First edition of this document." msgstr "" #: ./doc/user-guide/ch_dashboard.xml10(title) msgid "OpenStack dashboard" msgstr "" #: ./doc/user-guide/ch_dashboard.xml12(para) msgid "" "As a cloud end user, you can use the OpenStack dashboard to provision your " "own resources within the limits set by administrators. You can modify the " "examples provided in this section to create other types and sizes of server " "instances." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml19(para) msgid "" "When you launch a virtual machine, you can inject a key pair, which provides SSH access to your " "instance. For this to work, the image must contain the cloud-" "init package." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml23(para) msgid "" "You create at least one key pair for each project. You can use the key pair " "for multiple instances that belong to that project. If you generate a key " "pair with an external tool, you can import it into OpenStack." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml26(para) msgid "" "If an image uses a static root password or a static key set – neither is " "recommended – you must not provide a key pair when you launch the instance." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml29(para) msgid "" "A security group is a named collection " "of network access rules that you use to limit the types of traffic that have" " access to instances. When you launch an instance, you can assign one or " "more security groups to it. If you do not create security groups, new " "instances are automatically assigned to the default security group, unless " "you explicitly specify a different security group." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml36(para) msgid "" "The associated rules in each security " "group control the traffic to instances in the group. Any incoming traffic " "that is not matched by a rule is denied access by default. You can add rules" " to or remove rules from a security group, and you can modify rules for the " "default and any other security group." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml42(para) msgid "" "You can modify the rules in a security group to allow access to instances " "through different ports and protocols. For example, you can modify rules to " "allow access to instances through SSH, to ping instances, or to allow UDP " "traffic; for example, for a DNS server running on an instance. You specify " "the following parameters for rules:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml50(para) msgid "" "Source of traffic. Enable traffic to " "instances from either IP addresses inside the cloud from other group members" " or from all IP addresses." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml56(para) msgid "" "Protocol. Choose TCP for SSH, ICMP for " "pings, or UDP." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml60(para) msgid "" "Destination port on virtual machine. " "Define a port range. To open a single port only, enter the same value twice." " ICMP does not support ports; instead, you enter values to define the codes " "and types of ICMP traffic to be allowed." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml67(para) msgid "Rules are automatically enforced as soon as you create or modify them." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml70(para) msgid "" "Instances that use the default security group cannot, by default, be " "accessed from any IP address outside of the cloud. If you want those IP " "addresses to access the instances, you must modify the rules for the default" " security group." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml74(para) msgid "" "You can also assign a floating IP address to a running instance to make it " "accessible from outside the cloud. See ." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml81(para) msgid "You can generate a key pair or upload an existing public key." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml84(para) msgid "To generate a key pair, run the following command:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml85(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml107(replaceable) msgid "KEY_NAME" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml85(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml96(replaceable) msgid "MY_KEY" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml86(para) msgid "" "The command generates a key pair with the name that you specify fir " "KEY_NAME, writes the private key to the " ".pem file that you specify, and registers the public " "key at the Nova database." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml93(para) msgid "" "To set the permissions of the .pem file so that only " "you can read and write to it, run the following command:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml104(para) msgid "" "If you have already generated a key pair and the public key is located at " "~/.ssh/id_rsa.pub, run the following command to upload " "the public key:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml108(para) msgid "" "The command registers the public key at the Nova database and names the key " "pair the name that you specify for " "KEY_NAME." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml113(para) msgid "" "To ensure that the key pair has been successfully imported, list key pairs " "as follows:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml123(para) msgid "" "To list the security groups for the current project, including descriptions," " enter the following command:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml128(para) msgid "" "To create a security group with a specified name and description, enter the " "following command:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml131(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml136(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml156(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml166(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml173(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml186(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml193(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml211(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml223(replaceable) msgid "SECURITY_GROUP_NAME" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml131(replaceable) msgid "GROUP_DESCRIPTION" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml134(para) msgid "To delete a specified group, enter the following command:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml138(para) msgid "" "You cannot delete the default security group for a project. Also, you cannot" " delete a security group that is assigned to a running instance." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml149(para) msgid "" "Modify security group rules with the commands. Before you " "begin, source the OpenStack RC file. For details, see ." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml154(para) msgid "To list the rules for a security group, run the following command:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml159(para) msgid "" "To allow SSH access to the instances, choose one of the following options:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml163(para) msgid "" "Allow access from all IP addresses, specified as IP subnet " "0.0.0.0/0 in CIDR notation:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml169(para) msgid "" "Allow access only from IP addresses from other security groups (source " "groups) to access the specified port:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml173(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml193(replaceable) #: ./doc/user-guide/section_cli_nova_configure_instances.xml211(replaceable) msgid "SOURCE_GROUP_NAME" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml178(para) msgid "" "To allow pinging of the instances, choose one of the following options:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml182(para) msgid "" "Allow pinging from all IP addresses, specified as IP subnet " "0.0.0.0/0 in CIDR notation:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml186(para) msgid "This allows access to all codes and all types of ICMP traffic." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml190(para) msgid "" "Allow only members of other security groups (source groups) to ping " "instances:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml198(para) msgid "" "To allow access through a UDP port, such as allowing access to a DNS server " "that runs on a VM, choose one of the following options:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml203(para) msgid "" "Allow UDP access from IP addresses, specified as IP subnet " "0.0.0.0/0 in CIDR notation:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml208(para) msgid "" "Allow only IP addresses from other security groups (source groups) to access" " the specified port:" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml217(title) msgid "Delete a security group" msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml218(para) msgid "" "To delete a security group rule, specify the same arguments that you used to" " create the rule." msgstr "" #: ./doc/user-guide/section_cli_nova_configure_instances.xml221(para) msgid "" "For example, to delete the security group rule that permits SSH access from " "all IP addresses, run the following command." msgstr "" #. Put one translator per line, in the form of NAME , YEAR1, YEAR2 #: ./doc/user-guide/section_cli_nova_configure_instances.xml0(None) msgid "translator-credits" msgstr "překlad"