Most cloud images support public key authentication rather than conventional user name/password authentication. Before launching an instance, you must generate a public/private key pair using ssh-keygen and add the public key to your OpenStack environment. Source the demo tenant credentials: $ source demo-openrc.sh Generate a key pair: $ ssh-keygen Add the public key to your OpenStack environment: $ nova keypair-add --pub-key ~/.ssh/id_rsa.pub demo-key This command provides no output. Verify addition of the public key: $ nova keypair-list +----------+-------------------------------------------------+ | Name | Fingerprint | +----------+-------------------------------------------------+ | demo-key | 6c:74:ec:3a:08:05:4e:9e:21:22:a6:dd:b2:62:b8:28 | +----------+-------------------------------------------------+ To launch an instance, you must at least specify the flavor, image name, network, security group, key, and instance name. A flavor specifies a virtual resource allocation profile which includes processor, memory, and storage. List available flavors: $ nova flavor-list +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ | ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public | +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ | 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True | | 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True | | 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True | | 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True | | 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True | +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ Your first instance uses the m1.tiny flavor. You can also reference a flavor by ID. List available images: $ nova image-list +--------------------------------------+---------------------+--------+--------+ | ID | Name | Status | Server | +--------------------------------------+---------------------+--------+--------+ | acafc7c0-40aa-4026-9673-b879898e1fc2 | cirros-0.3.2-x86_64 | ACTIVE | | +--------------------------------------+---------------------+--------+--------+ Your first instance uses the cirros-0.3.2-x86_64 image. List available networks: $ neutron net-list +--------------------------------------+----------+-------------------------------------------------------+ | id | name | subnets | +--------------------------------------+----------+-------------------------------------------------------+ | 3c612b5a-d1db-498a-babb-a4c50e344cb1 | demo-net | 20bcd3fd-5785-41fe-ac42-55ff884e3180 192.168.1.0/24 | | 9bce64a3-a963-4c05-bfcd-161f708042d1 | ext-net | b54a8d85-b434-4e85-a8aa-74873841a90d 203.0.113.0/24 | +--------------------------------------+----------+-------------------------------------------------------+ Your first instance uses the demo-net tenant network. However, you must reference this network using the ID instead of the name. List available security groups: $ nova secgroup-list +--------------------------------------+---------+-------------+ | Id | Name | Description | +--------------------------------------+---------+-------------+ | ad8d4ea5-3cad-4f7d-b164-ada67ec59473 | default | default | +--------------------------------------+---------+-------------+ Your first instance uses the default security group. By default, this security group implements a firewall that blocks remote access to instances. If you would like to permit remote access to your instance, launch it and then configure remote access. Launch the instance: Replace DEMO_NET_ID with the ID of the demo-net tenant network. $ nova boot --flavor m1.tiny --image cirros-0.3.2-x86_64 --nic net-id=DEMO_NET_ID \ --security-group default --key-name demo-key demo-instance1 +--------------------------------------+------------------------------------------------------------+ | Property | Value | +--------------------------------------+------------------------------------------------------------+ | OS-DCF:diskConfig | MANUAL | | OS-EXT-AZ:availability_zone | nova | | OS-EXT-STS:power_state | 0 | | OS-EXT-STS:task_state | scheduling | | OS-EXT-STS:vm_state | building | | OS-SRV-USG:launched_at | - | | OS-SRV-USG:terminated_at | - | | accessIPv4 | | | accessIPv6 | | | adminPass | vFW7Bp8PQGNo | | config_drive | | | created | 2014-04-09T19:24:27Z | | flavor | m1.tiny (1) | | hostId | | | id | 05682b91-81a1-464c-8f40-8b3da7ee92c5 | | image | cirros-0.3.2-x86_64 (acafc7c0-40aa-4026-9673-b879898e1fc2) | | key_name | demo-key | | metadata | {} | | name | demo-instance1 | | os-extended-volumes:volumes_attached | [] | | progress | 0 | | security_groups | default | | status | BUILD | | tenant_id | 7cf50047f8df4824bc76c2fdf66d11ec | | updated | 2014-04-09T19:24:27Z | | user_id | 0e47686e72114d7182f7569d70c519c9 | +--------------------------------------+------------------------------------------------------------+ Check the status of your instance: $ nova list +--------------------------------------+----------------+--------+------------+-------------+-------------------------+ | ID | Name | Status | Task State | Power State | Networks | +--------------------------------------+----------------+--------+------------+-------------+-------------------------+ | 05682b91-81a1-464c-8f40-8b3da7ee92c5 | demo-instance1 | ACTIVE | - | Running | demo-net=192.168.1.3 | +--------------------------------------+----------------+--------+------------+-------------+-------------------------+ The status changes from BUILD to ACTIVE when your instance finishes the build process. Obtain a Virtual Network Computing (VNC) session URL for your instance and access it from a web browser: $ nova get-vnc-console demo-instance1 novnc +-------+------------------------------------------------------------------------------------+ | Type | Url | +-------+------------------------------------------------------------------------------------+ | novnc | http://controller:6080/vnc_auto.html?token=2f6dd985-f906-4bfc-b566-e87ce656375b | +-------+------------------------------------------------------------------------------------+ If your web browser runs on a host that cannot resolve the controller host name, you can replace controller with the IP address of the management interface on your controller node. The CirrOS image includes conventional user name/password authentication and provides these credentials at the login prompt. After logging into CirrOS, we recommend that you verify network connectivity using ping. Verify the demo-net tenant network gateway: $ ping -c 4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=0.357 ms 64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=0.473 ms 64 bytes from 192.168.1.1: icmp_req=3 ttl=64 time=0.504 ms 64 bytes from 192.168.1.1: icmp_req=4 ttl=64 time=0.470 ms --- 192.168.1.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.357/0.451/0.504/0.055 ms Verify the ext-net external network: $ ping -c 4 openstack.org PING openstack.org (174.143.194.225) 56(84) bytes of data. 64 bytes from 174.143.194.225: icmp_req=1 ttl=53 time=17.4 ms 64 bytes from 174.143.194.225: icmp_req=2 ttl=53 time=17.5 ms 64 bytes from 174.143.194.225: icmp_req=3 ttl=53 time=17.7 ms 64 bytes from 174.143.194.225: icmp_req=4 ttl=53 time=17.5 ms --- openstack.org ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 17.431/17.575/17.734/0.143 ms Add rules to the default security group: Permit ICMP (ping): $ nova secgroup-add-rule default icmp -1 -1 0.0.0.0/0 +-------------+-----------+---------+-----------+--------------+ | IP Protocol | From Port | To Port | IP Range | Source Group | +-------------+-----------+---------+-----------+--------------+ | icmp | -1 | -1 | 0.0.0.0/0 | | +-------------+-----------+---------+-----------+--------------+ Permit secure shell (SSH) access: $ nova secgroup-add-rule default tcp 22 22 0.0.0.0/0 +-------------+-----------+---------+-----------+--------------+ | IP Protocol | From Port | To Port | IP Range | Source Group | +-------------+-----------+---------+-----------+--------------+ | tcp | 22 | 22 | 0.0.0.0/0 | | +-------------+-----------+---------+-----------+--------------+ Create a floating IP address on the ext-net external network: $ neutron floatingip-create ext-net Created a new floatingip: +---------------------+--------------------------------------+ | Field | Value | +---------------------+--------------------------------------+ | fixed_ip_address | | | floating_ip_address | 203.0.113.102 | | floating_network_id | 9bce64a3-a963-4c05-bfcd-161f708042d1 | | id | 05e36754-e7f3-46bb-9eaa-3521623b3722 | | port_id | | | router_id | | | status | DOWN | | tenant_id | 7cf50047f8df4824bc76c2fdf66d11ec | +---------------------+--------------------------------------+ Associate the floating IP address with your instance: $ nova floating-ip-associate demo-instance1 203.0.113.102 This command provides no output. Check the status of your floating IP address: $ nova list +--------------------------------------+----------------+--------+------------+-------------+-----------------------------------------+ | ID | Name | Status | Task State | Power State | Networks | +--------------------------------------+----------------+--------+------------+-------------+-----------------------------------------+ | 05682b91-81a1-464c-8f40-8b3da7ee92c5 | demo-instance1 | ACTIVE | - | Running | demo-net=192.168.1.3, 203.0.113.102 | +--------------------------------------+----------------+--------+------------+-------------+-----------------------------------------+ Verify network connectivity using ping from the controller node or any host on the external network: $ ping -c 4 203.0.113.102 PING 203.0.113.102 (203.0.113.112) 56(84) bytes of data. 64 bytes from 203.0.113.102: icmp_req=1 ttl=63 time=3.18 ms 64 bytes from 203.0.113.102: icmp_req=2 ttl=63 time=0.981 ms 64 bytes from 203.0.113.102: icmp_req=3 ttl=63 time=1.06 ms 64 bytes from 203.0.113.102: icmp_req=4 ttl=63 time=0.929 ms --- 203.0.113.102 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev = 0.929/1.539/3.183/0.951 ms Access your instance using SSH from the controller node or any host on the external network: $ ssh cirros@203.0.113.102 The authenticity of host '203.0.113.102 (203.0.113.102)' can't be established. RSA key fingerprint is ed:05:e9:e7:52:a0:ff:83:68:94:c7:d1:f2:f8:e2:e9. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '203.0.113.102' (RSA) to the list of known hosts. $ If your host does not contain the public/private key pair created in an earlier step, SSH prompts for the default password associated with the cirros user. If your instance does not launch or seem to work as you expect, see the OpenStack Operations Guide for more information or use one of the many other options to seek assistance. We want your environment to work!