.. _launch-instance-networks-private: Private project network ~~~~~~~~~~~~~~~~~~~~~~~ If you chose networking option 2, you can also create a private project virtual network that connects to the physical network infrastructure via layer-3 (routing) and NAT. This network includes a DHCP server that provides IP addresses to instances. An instance on this network can automatically access external networks such as the Internet. However, access to an instance on this network from external networks such as the Internet requires a :term:`floating IP address`. The ``demo`` or other unprivileged user can create this network because it only provides connectivity to instances within the ``demo`` project. .. warning:: You must :ref:`create the public provider network ` before the private project network. .. note:: The following instructions and diagrams use example IP address ranges. You must adjust them for your particular environment. .. figure:: figures/network2-overview.png :alt: Networking Option 2: Self-service networks - Overview **Networking Option 2: Self-service networks - Overview** .. figure:: figures/network2-connectivity.png :alt: Networking Option 2: Self-service networks - Connectivity **Networking Option 2: Self-service networks - Connectivity** Create the private project network ---------------------------------- #. On the controller node, source the ``demo`` credentials to gain access to user-only CLI commands: .. code-block:: console $ source demo-openrc.sh #. Create the network: .. code-block:: console $ neutron net-create private Created a new network: +-----------------------+--------------------------------------+ | Field | Value | +-----------------------+--------------------------------------+ | admin_state_up | True | | id | 7c6f9b37-76b4-463e-98d8-27e5686ed083 | | mtu | 0 | | name | private | | port_security_enabled | True | | router:external | False | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | f5b2ccaa75ac413591f12fcaa096aa5c | +-----------------------+--------------------------------------+ Non-privileged users typically cannot supply additional parameters to this command. The service automatically chooses paramters using information from the following files: ``ml2_conf.ini``: .. code-block:: ini [ml2] tenant_network_types = vxlan [ml2_type_vxlan] vni_ranges = 1:1000 #. Create a subnet on the network: .. code-block:: console $ neutron subnet-create private PRIVATE_NETWORK_CIDR --name private \ --gateway PRIVATE_NETWORK_GATEWAY Replace ``PRIVATE_NETWORK_CIDR`` with the subnet you want to use on the private network. You can use any arbitrary value, although we recommend a network from `RFC 1918 `_. Replace ``PRIVATE_NETWORK_GATEWAY`` with the gateway you want to use on the private network, typically the ".1" IP address. **Example** The private network uses 172.16.1.0/24 with a gateway on 172.16.1.1: .. code-block:: console $ neutron subnet-create private 172.16.1.0/24 --name private --gateway 172.16.1.1 Created a new subnet: +-------------------+------------------------------------------------+ | Field | Value | +-------------------+------------------------------------------------+ | allocation_pools | {"start": "172.16.1.2", "end": "172.16.1.254"} | | cidr | 172.16.1.0/24 | | dns_nameservers | | | enable_dhcp | True | | gateway_ip | 172.16.1.1 | | host_routes | | | id | 3482f524-8bff-4871-80d4-5774c2730728 | | ip_version | 4 | | ipv6_address_mode | | | ipv6_ra_mode | | | name | private | | network_id | 7c6f9b37-76b4-463e-98d8-27e5686ed083 | | subnetpool_id | | | tenant_id | f5b2ccaa75ac413591f12fcaa096aa5c | +-------------------+------------------------------------------------+ Create a router --------------- Private project networks connect to public provider networks using a virtual router. Each router contains an interface to at least one private project network and a gateway on a public provider network. The public provider network must include the ``router: external`` option to enable project routers to use it for connectivity to external networks such as the Internet. The ``admin`` or other privileged user must include this option during network creation or add it later. In this case, we can add it to the existing ``public`` provider network. #. On the controller node, source the ``admin`` credentials to gain access to admin-only CLI commands: .. code-block:: console $ source admin-openrc.sh #. Add the ``router: external`` option to the ``public`` provider network: .. code-block:: console $ neutron net-update public --router:external Updated network: public #. Source the ``demo`` credentials to gain access to user-only CLI commands: .. code-block:: console $ source demo-openrc.sh #. Create the router: .. code-block:: console $ neutron router-create router Created a new router: +-----------------------+--------------------------------------+ | Field | Value | +-----------------------+--------------------------------------+ | admin_state_up | True | | external_gateway_info | | | id | 89dd2083-a160-4d75-ab3a-14239f01ea0b | | name | router | | routes | | | status | ACTIVE | | tenant_id | f5b2ccaa75ac413591f12fcaa096aa5c | +-----------------------+--------------------------------------+ #. Add the private network subnet as an interface on the router: .. code-block:: console $ neutron router-interface-add router private Added interface bff6605d-824c-41f9-b744-21d128fc86e1 to router router. #. Set a gateway on the public network on the router: .. code-block:: console $ neutron router-gateway-set router public Set gateway for router router Verify operation ---------------- We recommend that you verify operation and fix any issues before proceeding The following steps use the IP address ranges from the network and subnet creation examples. #. On the controller node, source the ``admin`` credentials to gain access to admin-only CLI commands: .. code-block:: console $ source admin-openrc.sh #. List network namespaces. You should see one ``qrouter`` namespace and two ``qdhcp`` namespaces. .. code-block:: console $ ip netns qrouter-89dd2083-a160-4d75-ab3a-14239f01ea0b qdhcp-7c6f9b37-76b4-463e-98d8-27e5686ed083 qdhcp-0e62efcd-8cee-46c7-b163-d8df05c3c5ad #. List ports on the router to determine the gateway IP address on the public provider network: .. code-block:: console $ neutron router-port-list router +--------------------------------------+------+-------------------+------------------------------------------+ | id | name | mac_address | fixed_ips | +--------------------------------------+------+-------------------+------------------------------------------+ | bff6605d-824c-41f9-b744-21d128fc86e1 | | fa:16:3e:2f:34:9b | {"subnet_id": | | | | | "3482f524-8bff-4871-80d4-5774c2730728", | | | | | "ip_address": "172.16.1.1"} | | d6fe98db-ae01-42b0-a860-37b1661f5950 | | fa:16:3e:e8:c1:41 | {"subnet_id": | | | | | "5cc70da8-4ee7-4565-be53-b9c011fca011", | | | | | "ip_address": "203.0.113.102"} | +--------------------------------------+------+-------------------+------------------------------------------+ #. Ping this IP address from the controller node or any host on the public physical network: .. code-block:: console $ ping -c 4 203.0.113.102 PING 203.0.113.102 (203.0.113.102) 56(84) bytes of data. 64 bytes from 203.0.113.102: icmp_req=1 ttl=64 time=0.619 ms 64 bytes from 203.0.113.102: icmp_req=2 ttl=64 time=0.189 ms 64 bytes from 203.0.113.102: icmp_req=3 ttl=64 time=0.165 ms 64 bytes from 203.0.113.102: icmp_req=4 ttl=64 time=0.216 ms --- 203.0.113.102 ping statistics --- rtt min/avg/max/mdev = 0.165/0.297/0.619/0.187 ms Return to :ref:`Launch an instance - Create virtual networks `.