# # Translators: # codegin, 2013 msgid "" msgstr "" "Project-Id-Version: OpenStack Manuals\n" "POT-Creation-Date: 2014-01-17 07:14+0000\n" "PO-Revision-Date: 2014-01-16 07:13+0000\n" "Last-Translator: openstackjenkins \n" "Language-Team: French (http://www.transifex.com/projects/p/openstack/language/fr/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: fr\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n" #: ./doc/install-guide/section_keystone-users.xml5(title) msgid "Define users, tenants, and roles" msgstr "" #: ./doc/install-guide/section_keystone-users.xml7(para) msgid "" "After you install the Identity Service, set up users, tenants, and roles to " "authenticate against. These are used to allow access to services and " "endpoints, described in the next section." msgstr "" #: ./doc/install-guide/section_keystone-users.xml21(replaceable) #: ./doc/install-guide/section_keystone-users.xml24(replaceable) msgid "FCAF3E..." msgstr "" #: ./doc/install-guide/section_keystone-users.xml11(para) msgid "" "Typically, you would indicate a user and password to authenticate with the " "Identity Service. At this point, however, we have not created any users, so " "we have to use the authorization token created in the previous section. You " "can pass this with the option to the " " command or set the OS_SERVICE_TOKEN " "environment variable. We'll set OS_SERVICE_TOKEN, as well as " "OS_SERVICE_ENDPOINT to specify where the Identity Service is " "running. Replace with your authorization token." msgstr "" #: ./doc/install-guide/section_keystone-users.xml27(para) msgid "" "First, create a tenant for an administrative user and a tenant for other " "OpenStack services to use." msgstr "" #: ./doc/install-guide/section_keystone-users.xml33(para) msgid "" "Next, create an administrative user called admin. Choose " "a password for the admin user and specify an email " "address for the account." msgstr "" #: ./doc/install-guide/section_keystone-users.xml37(replaceable) #: ./doc/install-guide/section_keystone-verify.xml25(replaceable) #: ./doc/install-guide/section_keystone-verify.xml35(replaceable) #: ./doc/install-guide/section_keystone-verify.xml48(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml408(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml377(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml483(replaceable) msgid "ADMIN_PASS" msgstr "" #: ./doc/install-guide/section_keystone-users.xml38(replaceable) msgid "admin@example.com" msgstr "" #: ./doc/install-guide/section_keystone-users.xml40(para) msgid "" "Create a role for administrative tasks called admin. Any " "roles you create should map to roles specified in the " "policy.json files of the various OpenStack services. " "The default policy files use the admin role to allow " "access to most services." msgstr "" #: ./doc/install-guide/section_keystone-users.xml48(para) msgid "" "Finally, you have to add roles to users. Users always log in with a tenant, " "and roles are assigned to users within tenants. Add the " "admin role to the admin user when " "logging in with the admin tenant." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml29(None) msgid "" "@@image: 'figures/debconf-screenshots/api-endpoint_1_register_endpoint.png';" " md5=d534be231be4f725820a1050fbf44231" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml40(None) msgid "" "@@image: 'figures/debconf-screenshots/api-" "endpoint_2_keystone_server_ip.png'; md5=d2c5a5b82dd433fcf9cde6f5ac34c30e" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml54(None) msgid "" "@@image: 'figures/debconf-screenshots/api-" "endpoint_3_keystone_authtoken.png'; md5=1f3b05ebe671f64d672ac70d246e4f39" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml69(None) msgid "" "@@image: 'figures/debconf-screenshots/api-" "endpoint_4_service_endpoint_ip_address.png'; " "md5=6853f0ae2ef8d5fddb22c466d465de15" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml81(None) msgid "" "@@image: 'figures/debconf-screenshots/api-endpoint_5_region_name.png'; " "md5=a6bce0acf5a1cb85f161290f0cf30733" msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml6(title) msgid "Register API endpoints" msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml7(para) msgid "" "All Debian packages for API services, except the heat-api" " package, register the service in the Identity Service catalog. This feature" " is helpful because API endpoints are difficult to remember." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml12(para) msgid "" "The heat-common package and not the heat-" "api package configures the Orchestration service." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml16(para) msgid "" "When you install a package for an API service, you are prompted to register " "that service. However, after you install or upgrade the package for an API " "service, Debian immediately removes your response to this prompt from the " "debconf database. Consequently, you are prompted to re-" "register the service with the Identity Service. If you already registered " "the API service, respond no when you upgrade." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml33(para) msgid "This screen registers packages in the Identity Service catalog:" msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml44(para) msgid "" "You are prompted for the Identity Service admin_token " "value. The Identity Service uses this value to register the API service. " "When you set up the keystone package, this value is " "configured automatically." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml58(para) msgid "" "This screen configures the IP addresses for the service. The configuration " "script automatically detects the IP address used by the interface that is " "connected to the default route (/sbin/route and " "/sbin/ip)." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml62(para) msgid "" "Unless you have a unique set up for your network, press " "ENTER." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml73(para) msgid "" "This screen configures the region name for the service. For example, us-east-coast or europe-paris." msgstr "" #: ./doc/install-guide/ch_glance.xml6(title) msgid "Configure the Image Service" msgstr "" #: ./doc/install-guide/ch_glance.xml7(para) msgid "" "The OpenStack Image Service enables users to discover, register, and " "retrieve virtual machine images. Also known as the glance project, the Image" " Service offers a REST API that enables you to query virtual machine image " "metadata and retrieve an actual image. Virtual machine images made available" " through the Image Service can be stored in a variety of locations from " "simple file systems to object-storage systems like OpenStack Object Storage." msgstr "" #: ./doc/install-guide/ch_glance.xml16(para) msgid "" "For simplicity this guide configures the Image Service to use the " "file backend. This means that images uploaded to the " "Image Service will be stored in a directory on the same system that hosts " "the service. By default this directory is " "/var/lib/glance/images/." msgstr "" #: ./doc/install-guide/ch_glance.xml23(para) msgid "" "Ensure that the system has sufficient space available under this directory " "to store virtual machine images and snapshots before proceeding. At an " "absolute minimum several gigabytes of space should be available for use by " "the Image Service in a proof of concept deployment." msgstr "" #: ./doc/install-guide/ch_cinder.xml6(title) msgid "Add the Block Storage Service" msgstr "" #: ./doc/install-guide/ch_cinder.xml7(para) msgid "" "The OpenStack Block Storage Service works though the interaction of a series" " of daemon processes named cinder-* that reside persistently on the host " "machine or machines. You can run the binaries from a single node or across " "multiple nodes. You can also run them on the same node as other OpenStack " "services. The following sections introduce Block Storage Service components " "and concepts and show you how to configure and install the Block Storage " "Service." msgstr "" #: ./doc/install-guide/section_nova-kvm.xml5(title) msgid "Enable KVM on the Compute node" msgstr "" #: ./doc/install-guide/section_nova-kvm.xml7(para) msgid "" "OpenStack Compute requires hardware virtualization support and certain " "kernel modules. Use the following procedure to determine whether your system" " has this support and the correct kernel modules and to enable KVM. In many " "cases, your distribution completes this installation and you do not need to " "perform any additional action." msgstr "" #: ./doc/install-guide/section_glance-verify.xml5(title) msgid "Verify the Image Service installation" msgstr "" #: ./doc/install-guide/section_glance-verify.xml6(para) msgid "" "To test the Image Service installation, download at least one virtual " "machine image that is known to work with OpenStack. For example, CirrOS is a" " small test image that is often used for testing OpenStack deployments " "(CirrOS downloads). " "This walk through uses the 64-bit CirrOS QCOW2 image." msgstr "" #: ./doc/install-guide/section_glance-verify.xml13(para) msgid "" "For more information about how to download and build images, see OpenStack Virtual Machine Image " "Guide. For information about how to manage images, see " "the OpenStack User " "Guide." msgstr "" #: ./doc/install-guide/section_glance-verify.xml24(para) msgid "" "Download the image into a dedicated directory using or " ":" msgstr "" #: ./doc/install-guide/section_glance-verify.xml32(para) msgid "Upload the image to the Image Service:" msgstr "" #: ./doc/install-guide/section_glance-verify.xml33(replaceable) #: ./doc/install-guide/section_glance-verify.xml38(replaceable) msgid "imageLabel" msgstr "" #: ./doc/install-guide/section_glance-verify.xml33(replaceable) #: ./doc/install-guide/section_glance-verify.xml45(replaceable) msgid "fileFormat" msgstr "" #: ./doc/install-guide/section_glance-verify.xml34(replaceable) #: ./doc/install-guide/section_glance-verify.xml65(replaceable) msgid "containerFormat" msgstr "" #: ./doc/install-guide/section_glance-verify.xml34(replaceable) #: ./doc/install-guide/section_glance-verify.xml86(replaceable) msgid "accessValue" msgstr "" #: ./doc/install-guide/section_glance-verify.xml34(replaceable) #: ./doc/install-guide/section_glance-verify.xml101(replaceable) msgid "imageFile" msgstr "" #: ./doc/install-guide/section_glance-verify.xml35(para) msgid "Where:" msgstr "" #: ./doc/install-guide/section_glance-verify.xml40(para) msgid "Arbitrary label. The name by which users refer to the image." msgstr "" #: ./doc/install-guide/section_glance-verify.xml47(para) msgid "" "Specifies the format of the image file. Valid formats include " "qcow2, raw, vhd, " "vmdk, vdi, iso, " "aki, ari, and ami." msgstr "" #: ./doc/install-guide/section_glance-verify.xml58(para) msgid "" "You can verify the format using the command: " "" msgstr "" #: ./doc/install-guide/section_glance-verify.xml67(para) msgid "" "Specifies the container format. Valid formats include: " "bare, ovf, aki, " "ari and ami." msgstr "" #: ./doc/install-guide/section_glance-verify.xml73(para) msgid "" "Specify bare to indicate that the image file is not in a " "file format that contains metadata about the virtual machine. Although this " "field is currently required, it is not actually used by any of the OpenStack" " services and has no effect on system behavior. Because the value is not " "used anywhere, it safe to always specify bare as the " "container format." msgstr "" #: ./doc/install-guide/section_glance-verify.xml90(para) msgid "true - All users can view and use the image." msgstr "" #: ./doc/install-guide/section_glance-verify.xml94(para) msgid "false - Only administrators can view and use the image." msgstr "" #: ./doc/install-guide/section_glance-verify.xml88(para) msgid "Specifies image access: " msgstr "" #: ./doc/install-guide/section_glance-verify.xml103(para) msgid "Specifies the name of your downloaded image file." msgstr "" #: ./doc/install-guide/section_glance-verify.xml108(para) msgid "For example:" msgstr "Par exemple :" #: ./doc/install-guide/section_glance-verify.xml132(para) msgid "" "Because the returned image ID is generated dynamically, your deployment " "generates a different ID than the one shown in this example." msgstr "" #: ./doc/install-guide/section_glance-verify.xml138(para) msgid "Confirm that the image was uploaded and display its attributes:" msgstr "" #: ./doc/install-guide/ch_clients.xml6(title) msgid "Install and configure the OpenStack clients" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-keystone_authtoken.xml30(None) msgid "" "@@image: 'figures/debconf-" "screenshots/service_keystone_authtoken_server_hostname.png'; " "md5=aafd53894e1d960531d4901123952117" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-keystone_authtoken.xml37(None) msgid "" "@@image: 'figures/debconf-" "screenshots/service_keystone_authtoken_admin_tenant_name.png'; " "md5=a935563e4fba9b00040e35cdcfffc732" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-keystone_authtoken.xml44(None) msgid "" "@@image: 'figures/debconf-" "screenshots/service_keystone_authtoken_tenant_admin_user.png'; " "md5=fe3dc93c591b3e9783d4d05556efcf25" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-keystone_authtoken.xml51(None) msgid "" "@@image: 'figures/debconf-" "screenshots/service_keystone_authtoken_admin_password.png'; " "md5=0c30c80315d5e636dbe93a938fc2822b" msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml6(title) msgid "Services and the [keystone_authtoken]" msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml7(para) msgid "" "Because most OpenStack services must access the Identity Service, you must " "configure the IP address of the keystone server to be able to " "access it. You must also configure the admin_tenant_name, " "admin_user, and admin_password options for each " "service to work." msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml13(para) msgid "Generally, this section looks like this:" msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml21(para) msgid "" "The debconf system helps users configure the auth_host, " "admin_tenant_name, admin_user and " "admin_password options." msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml25(para) msgid "The following screens show an example Image Service configuration:" msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml55(para) msgid "" "This information is stored in the configuration file for each service. For " "example:" msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml63(para) msgid "" "The Debian OpenStack packages offer automation for this, so OpenStack users " "do not have to manually edit the configuration files." msgstr "" #: ./doc/install-guide/ch_swift.xml6(title) msgid "Add Object Storage" msgstr "" #: ./doc/install-guide/ch_swift.xml8(para) msgid "" "The OpenStack Object Storage services work together to provide object " "storage and retrieval through a REST API. For this example architecture, you" " must have already installed the Identity Service, also known as Keystone." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml8(title) msgid "Neutron concepts" msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml9(para) msgid "" "Like Nova Networking, Neutron manages software-defined networking for your " "OpenStack installation. However, unlike Nova Networking, you can configure " "Neutron for advanced virtual network topologies, such as per-tenant private " "networks and more." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml13(para) msgid "" "Neutron has the following object abstractions: networks, subnets, and " "routers. Each has functionality that mimics its physical counterpart: " "networks contain subnets, and routers route traffic between different subnet" " and networks." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml17(para) msgid "" "Any given Neutron set up has at least one external network. This network, " "unlike the other networks, is not merely a virtually defined network. " "Instead, it represents the view into a slice of the external network that is" " accessible outside the OpenStack installation. IP addresses on the Neutron " "external network are accessible by anybody physically on the outside " "network. Because this network merely represents a slice of the outside " "network, DHCP is disabled on this network." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml25(para) msgid "" "In addition to external networks, any Neutron set up has one or more " "internal networks. These software-defined networks connect directly to the " "VMs. Only the VMs on any given internal network, or those on subnets " "connected through interfaces to a similar router, can access VMs connected " "to that network directly." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml30(para) msgid "" "For the outside network to access VMs, and vice versa, routers between the " "networks are needed. Each router has one gateway that is connected to a " "network and many interfaces that are connected to subnets. Like a physical " "router, subnets can access machines on other subnets that are connected to " "the same router, and machines can access the outside network through the " "gateway for the router." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml37(para) msgid "" "Additionally, you can allocate IP addresses on an external networks to ports" " on the internal network. Whenever something is connected to a subnet, that " "connection is called a port. You can associate external network IP addresses" " with ports to VMs. This way, entities on the outside network can access " "VMs." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml42(para) msgid "" "Neutron also supports security groups. " "Security groups enable administrators to define firewall rules in groups. A " "VM can belong to one or more security groups, and Neutron applies the rules " "in those security groups to block or unblock ports, port ranges, or traffic " "types for that VM." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml48(para) msgid "" "Each plug-in that Neutron uses has its own concepts. While not vital to " "operating Neutron, understanding these concepts can help you set up Neutron." " All Neutron installations use a core plug-in and a security group plug-in " "(or just the No-Op security group plug-in). Additionally, Firewall-" "as-a-service (FWaaS) and Load-balancing-as-a-service (LBaaS) plug-ins are " "available." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml55(title) msgid "Open vSwitch concepts" msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml56(para) msgid "" "The Open vSwitch plug-in is one of the most popular core plug-ins. Open " "vSwitch configurations consists of bridges and ports. Ports represent " "connections to other things, such as physical interfaces and patch cables. " "Packets from any given port on a bridge are shared with all other ports on " "that bridge. Bridges can be connected through Open vSwitch virtual patch " "cables or through Linux virtual Ethernet cables (veth). " "Additionally, bridges appear as network interfaces to Linux, so you can " "assign IP addresses to them." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml66(para) msgid "" "In Neutron, the integration bridge, called br-int, " "connects directly to the VMs and associated services. The external bridge, " "called br-ex, connects to the external network. Finally, " "the VLAN configuration of the Open vSwitch plug-in uses bridges associated " "with each physical network." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml72(para) msgid "" "In addition to defining bridges, Open vSwitch has OpenFlow, which enables " "you to define networking flow rules. Certain configurations use these rules " "to transfer packets between VLANs." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml76(para) msgid "" "Finally, some configurations of Open vSwitch use network namespaces that " "enable Linux to group adapters into unique namespaces that are not visible " "to other namespaces, which allows the same network node to manage multiple " "Neutron routers." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml81(para) msgid "" "With Open vSwitch, you can use two different technologies to create the " "virtual networks: GRE or VLANs." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml83(para) msgid "" "Generic Routing Encapsulation (GRE) is the technology used in many VPNs. It " "wraps IP packets to create entirely new packets with different routing " "information. When the new packet reaches its destination, it is unwrapped, " "and the underlying packet is routed. To use GRE with Open vSwitch, Neutron " "creates GRE tunnels. These tunnels are ports on a bridge and enable bridges " "on different systems to act as though they were one bridge, which allows the" " compute and network nodes to act as one for the purposes of routing." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml92(para) msgid "" "Virtual LANs (VLANs), on the other hand, use a special modification to the " "Ethernet header. They add a 4-byte VLAN tag that ranges from 1 to 4094 (the " "0 tag is special, and the 4095 tag, made of all ones, is equivalent to an " "untagged packet). Special NICs, switches, and routers know how to interpret " "the VLAN tags, as does Open vSwitch. Packets tagged for one VLAN are only " "shared with other devices configured to be on that VLAN, even through all " "devices are on the same physical network." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml101(para) msgid "" "The most common security group driver used with Open vSwitch is the Hybrid " "IPTables/Open vSwitch plug-in. It uses a combination for IPTables and " "OpenFlow rules. Use the IPTables tool to create firewalls and set up NATs on" " Linux. This tool uses a complex rule system and chains of rules to " "accommodate the complex rules required by Neutron security groups." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml6(title) msgid "Install the Telemetry service" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml8(para) msgid "" "OpenStack Telemetry is an API service that provides a collector and a range " "of disparate agents. Before you can install these agents on nodes such as " "the compute node, you must use this procedure to install the core components" " on the controller node." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml14(para) msgid "Install the Telemetry service on the controller node:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml21(para) msgid "" "Respond to the prompts for [keystone_authtoken] " "settings, RabbitMQ " "credentials and API " "endpoint registration." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml29(para) msgid "" "The Telemetry service uses a database to store information. Specify the " "location of the database in the configuration file. The examples use a " "MongoDB database on the controller node:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml38(para) msgid "" "Configure MongoDB to make it listen on the controller public IP address. " "Edit the /etc/mongodb.conf file and modify the " "bind_ip key:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml44(para) msgid "Restart the MongoDB service to apply the configuration change:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml48(para) msgid "" "Start the MongoDB server and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml58(para) msgid "Create the database and a ceilometer database user:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml63(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml70(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml79(replaceable) msgid "CEILOMETER_DBPASS" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml68(para) msgid "Configure the Telemetry service to use the database:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml70(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml79(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml113(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml135(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml181(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml182(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml183(replaceable) #: ./doc/install-guide/section_nova-controller.xml55(replaceable) #: ./doc/install-guide/section_nova-controller.xml69(replaceable) #: ./doc/install-guide/section_nova-controller.xml154(replaceable) #: ./doc/install-guide/section_nova-controller.xml194(replaceable) #: ./doc/install-guide/section_nova-controller.xml197(replaceable) #: ./doc/install-guide/section_nova-controller.xml221(replaceable) #: ./doc/install-guide/section_nova-controller.xml222(replaceable) #: ./doc/install-guide/section_nova-controller.xml223(replaceable) #: ./doc/install-guide/section_keystone-services.xml46(replaceable) #: ./doc/install-guide/section_keystone-services.xml47(replaceable) #: ./doc/install-guide/section_keystone-services.xml48(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml181(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml186(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml194(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml199(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml271(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml276(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml326(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml410(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml117(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml179(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml183(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml187(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml193(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml223(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml227(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml235(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml322(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml326(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml330(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml336(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml378(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml379(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml193(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml212(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml229(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml234(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml284(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml287(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml291(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml301(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml332(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml337(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml346(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml365(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml424(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml449(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml485(replaceable) #: ./doc/install-guide/section_cinder-node.xml110(replaceable) #: ./doc/install-guide/section_cinder-node.xml127(replaceable) #: ./doc/install-guide/section_cinder-node.xml164(replaceable) #: ./doc/install-guide/section_cinder-node.xml167(replaceable) #: ./doc/install-guide/section_cinder-controller.xml47(replaceable) #: ./doc/install-guide/section_cinder-controller.xml50(replaceable) #: ./doc/install-guide/section_cinder-controller.xml89(replaceable) #: ./doc/install-guide/section_cinder-controller.xml107(replaceable) #: ./doc/install-guide/section_cinder-controller.xml144(replaceable) #: ./doc/install-guide/section_cinder-controller.xml145(replaceable) #: ./doc/install-guide/section_cinder-controller.xml146(replaceable) #: ./doc/install-guide/section_cinder-controller.xml157(replaceable) #: ./doc/install-guide/section_cinder-controller.xml158(replaceable) #: ./doc/install-guide/section_cinder-controller.xml159(replaceable) #: ./doc/install-guide/section_neutron-install.xml160(replaceable) #: ./doc/install-guide/section_neutron-install.xml161(replaceable) #: ./doc/install-guide/section_neutron-install.xml162(replaceable) #: ./doc/install-guide/section_neutron-install.xml285(replaceable) #: ./doc/install-guide/section_neutron-install.xml325(replaceable) #: ./doc/install-guide/section_neutron-install.xml343(replaceable) #: ./doc/install-guide/section_neutron-install.xml351(replaceable) #: ./doc/install-guide/section_neutron-install.xml353(replaceable) #: ./doc/install-guide/section_neutron-install.xml367(replaceable) #: ./doc/install-guide/section_neutron-install.xml368(replaceable) #: ./doc/install-guide/section_neutron-install.xml841(replaceable) #: ./doc/install-guide/section_neutron-install.xml843(replaceable) #: ./doc/install-guide/section_neutron-install.xml868(replaceable) #: ./doc/install-guide/section_neutron-install.xml880(replaceable) #: ./doc/install-guide/section_neutron-install.xml909(replaceable) #: ./doc/install-guide/section_neutron-install.xml917(replaceable) #: ./doc/install-guide/section_neutron-install.xml928(replaceable) #: ./doc/install-guide/section_neutron-install.xml943(replaceable) #: ./doc/install-guide/section_neutron-install.xml953(replaceable) #: ./doc/install-guide/section_neutron-install.xml964(replaceable) #: ./doc/install-guide/section_neutron-install.xml969(replaceable) #: ./doc/install-guide/section_neutron-install.xml1070(replaceable) #: ./doc/install-guide/section_neutron-install.xml1220(replaceable) #: ./doc/install-guide/section_neutron-install.xml1235(replaceable) #: ./doc/install-guide/section_neutron-install.xml1237(replaceable) #: ./doc/install-guide/section_neutron-install.xml1264(replaceable) #: ./doc/install-guide/section_neutron-install.xml1270(replaceable) #: ./doc/install-guide/section_neutron-install.xml1271(replaceable) #: ./doc/install-guide/section_neutron-install.xml1295(replaceable) #: ./doc/install-guide/section_neutron-install.xml1319(replaceable) #: ./doc/install-guide/section_neutron-install.xml1338(replaceable) #: ./doc/install-guide/section_neutron-install.xml1362(replaceable) #: ./doc/install-guide/section_neutron-install.xml1372(replaceable) #: ./doc/install-guide/section_neutron-install.xml1383(replaceable) #: ./doc/install-guide/section_neutron-install.xml1388(replaceable) #: ./doc/install-guide/section_heat-install.xml113(replaceable) #: ./doc/install-guide/section_heat-install.xml118(replaceable) #: ./doc/install-guide/section_heat-install.xml119(replaceable) #: ./doc/install-guide/section_heat-install.xml134(replaceable) #: ./doc/install-guide/section_heat-install.xml135(replaceable) #: ./doc/install-guide/section_heat-install.xml136(replaceable) #: ./doc/install-guide/section_heat-install.xml145(replaceable) #: ./doc/install-guide/section_heat-install.xml146(replaceable) #: ./doc/install-guide/section_heat-install.xml147(replaceable) #: ./doc/install-guide/section_nova-compute.xml112(replaceable) #: ./doc/install-guide/section_nova-compute.xml135(replaceable) #: ./doc/install-guide/section_nova-compute.xml158(replaceable) #: ./doc/install-guide/section_nova-compute.xml170(replaceable) #: ./doc/install-guide/section_nova-compute.xml178(replaceable) #: ./doc/install-guide/section_nova-compute.xml181(replaceable) #: ./doc/install-guide/section_nova-compute.xml221(replaceable) #: ./doc/install-guide/section_glance-install.xml57(replaceable) #: ./doc/install-guide/section_glance-install.xml59(replaceable) #: ./doc/install-guide/section_glance-install.xml70(replaceable) #: ./doc/install-guide/section_glance-install.xml114(replaceable) #: ./doc/install-guide/section_glance-install.xml121(replaceable) #: ./doc/install-guide/section_glance-install.xml135(replaceable) #: ./doc/install-guide/section_glance-install.xml178(replaceable) #: ./doc/install-guide/section_glance-install.xml179(replaceable) #: ./doc/install-guide/section_glance-install.xml180(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml99(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install.xml104(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install.xml105(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install.xml106(replaceable) msgid "controller" msgstr "controller" #: ./doc/install-guide/section_ceilometer-install.xml71(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "change the [database] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml84(para) msgid "" "You must define an secret key that is used as a shared secret among " "Telemetry service nodes. Use to generate a random token and" " store it in the configuration file:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml91(para) msgid "For SUSE Linux Enterprise, run the following command:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml95(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "change the [publisher_rpc] section. Replace " "ADMIN_TOKEN with the results of the " "openssl command:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml104(replaceable) msgid "ADMIN_TOKEN" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml109(para) msgid "Configure the RabbitMQ access:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml111(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml114(replaceable) #: ./doc/install-guide/section_nova-controller.xml78(replaceable) #: ./doc/install-guide/section_nova-controller.xml86(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml182(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml195(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml272(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml327(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml114(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml180(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml191(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml323(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml334(replaceable) #: ./doc/install-guide/section_ceilometer-glance.xml17(replaceable) #: ./doc/install-guide/section_ceilometer-glance.xml22(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml207(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml230(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml333(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml360(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml425(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml444(replaceable) #: ./doc/install-guide/ch_basics.xml619(replaceable) #: ./doc/install-guide/section_cinder-node.xml130(replaceable) #: ./doc/install-guide/section_cinder-node.xml150(replaceable) #: ./doc/install-guide/section_cinder-controller.xml110(replaceable) #: ./doc/install-guide/section_cinder-controller.xml130(replaceable) #: ./doc/install-guide/section_neutron-install.xml309(replaceable) #: ./doc/install-guide/section_neutron-install.xml318(replaceable) #: ./doc/install-guide/section_neutron-install.xml861(replaceable) #: ./doc/install-guide/section_neutron-install.xml891(replaceable) #: ./doc/install-guide/section_neutron-install.xml1312(replaceable) #: ./doc/install-guide/section_neutron-install.xml1339(replaceable) #: ./doc/install-guide/section_heat-install.xml91(replaceable) #: ./doc/install-guide/section_heat-install.xml94(replaceable) #: ./doc/install-guide/section_nova-compute.xml142(replaceable) #: ./doc/install-guide/section_nova-compute.xml148(replaceable) msgid "RABBIT_PASS" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml112(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "update the [DEFAULT] section." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml118(para) msgid "Configure collector dispatcher" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml124(para) msgid "" "Create a ceilometer user that the Telemetry service uses " "to authenticate with the Identity Service. Use the " "service tenant and give the user the " "admin role:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml128(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml143(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml149(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml160(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml166(replaceable) msgid "CEILOMETER_PASS" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml128(replaceable) msgid "ceilometer@example.com" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml132(para) msgid "" "Add the credentials to the configuration files for the Telemetry service:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml150(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "change the [keystone_authtoken] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml161(para) msgid "Also set the [service_credentials] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml169(para) msgid "" "Register the Telemetry service with the Identity Service so that other " "OpenStack services can locate it. Use the command to " "register the service and specify the endpoint:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml177(para) msgid "" "Note the id property that is returned for the service. " "Use it when you create the endpoint:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml180(replaceable) #: ./doc/install-guide/section_nova-controller.xml220(replaceable) #: ./doc/install-guide/section_keystone-services.xml45(replaceable) #: ./doc/install-guide/section_cinder-controller.xml143(replaceable) #: ./doc/install-guide/section_cinder-controller.xml156(replaceable) #: ./doc/install-guide/section_neutron-install.xml159(replaceable) #: ./doc/install-guide/section_heat-install.xml133(replaceable) #: ./doc/install-guide/section_heat-install.xml144(replaceable) #: ./doc/install-guide/section_glance-install.xml177(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install.xml103(replaceable) msgid "the_service_id_above" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml186(para) msgid "Restart the services with their new settings:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml191(para) msgid "" "If log files are not generated for each service automatically, you should " "edit the /etc/ceilometer/ceilometer.conf and change the" " [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml202(para) msgid "" "Start the openstack-ceilometer-" "api, openstack-ceilometer-agent-centralopenstack-ceilometer-" "central and openstack-ceilometer-" "collector services and configure them to start when the system " "boots:" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml5(title) msgid "Verify the Telemetry Service installation" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml6(para) msgid "" "To test the Telemetry Service installation, download an image from the Image" " Service, and use the Telemetry Service to display usage statistics." msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml11(para) msgid "" "Use the ceilometer meter-list command to test the access " "to the Telemetry Service:" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml22(para) msgid "Download an image from the Image Service:" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml26(para) msgid "" "Call the ceilometer meter-list command again to validate " "that the download has been detected and stored by the Telemetry Service:" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml40(para) msgid "You can now get usage statistics for the various meters:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml5(title) msgid "Install Compute controller services" msgstr "" #: ./doc/install-guide/section_nova-controller.xml6(para) msgid "" "Compute is a collection of services that enable you to launch virtual " "machine instances. You can configure these services to run on separate nodes" " or the same node. In this guide, most services run on the controller node " "and the service that launches virtual machines runs on a dedicated compute " "node. This section shows you how to install and configure these services on " "the controller node." msgstr "" #: ./doc/install-guide/section_nova-controller.xml15(para) msgid "" "Install the openstack-nova meta-package, which installs " "various Compute packages that are used on the controller node." msgstr "" #: ./doc/install-guide/section_nova-controller.xml20(para) msgid "" "Install these Compute packages, which provide the Compute services that run " "on the controller node." msgstr "" #: ./doc/install-guide/section_nova-controller.xml38(para) msgid "" "Respond to the prompts for database management, [keystone_authtoken] " "settings, RabbitMQ " "credentials, and API " "endpoint registration. The command runs " "automatically." msgstr "" #: ./doc/install-guide/section_nova-controller.xml49(para) msgid "" "Compute stores information in a database. In this guide, we use a MySQL " "database on the controller node. Configure Compute with the database " "location and credentials. Replace NOVA_DBPASS " "with the password for the database that you will create in a later step." msgstr "" #: ./doc/install-guide/section_nova-controller.xml55(replaceable) #: ./doc/install-guide/section_nova-controller.xml61(replaceable) #: ./doc/install-guide/section_nova-controller.xml93(replaceable) #: ./doc/install-guide/section_nova-controller.xml107(replaceable) #: ./doc/install-guide/section_nova-controller.xml109(replaceable) #: ./doc/install-guide/section_nova-compute.xml110(replaceable) msgid "NOVA_DBPASS" msgstr "" #: ./doc/install-guide/section_nova-controller.xml56(para) msgid "" "Edit the [database] section in the " "/etc/nova/nova.conf file to modify this key:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml65(para) msgid "" "Set these configuration keys to configure Compute to use the Qpid message " "broker:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml72(para) #: ./doc/install-guide/section_nova-compute.xml136(para) msgid "" "Configure the Compute Service to use the RabbitMQ message broker by setting " "these configuration keys in the [DEFAULT] configuration " "group of the /etc/nova/nova.conf file:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml81(para) msgid "" "Set these configuration keys to configure Compute to use the RabbitMQ " "message broker:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml90(para) msgid "" "Run the command to create the Compute service database and " "tables and a nova database user." msgstr "" #: ./doc/install-guide/section_nova-controller.xml96(para) msgid "" "By default, the Ubuntu packages create an SQLite database. Delete the " "nova.sqlite file created in the " "/var/lib/nova/ directory so that it does not get used " "by mistake." msgstr "" #: ./doc/install-guide/section_nova-controller.xml102(para) msgid "" "Use the password you created previously to log in as root. Create a " "nova database user:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml112(para) msgid "Create the Compute service tables:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml116(para) msgid "" "Set the , , and " " configuration options to the " "internal IP address of the controller node:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml124(para) #: ./doc/install-guide/section_nova-network.xml62(para) msgid "" "Edit the /etc/nova/nova.conf file and add these lines " "to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml127(para) msgid "" "In Debian, the debconf package automatically sets up " "my_ip parameter but you must edit the " "/etc/nova/nova.conf file to configure the " " and " " options, which appear at the " "end of the file:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml142(para) msgid "" "Create a nova user that Compute uses to authenticate with" " the Identity Service. Use the service tenant and give " "the user the admin role:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml146(replaceable) #: ./doc/install-guide/section_nova-controller.xml159(replaceable) #: ./doc/install-guide/section_nova-controller.xml178(replaceable) #: ./doc/install-guide/section_nova-controller.xml200(replaceable) #: ./doc/install-guide/section_nova-compute.xml117(replaceable) #: ./doc/install-guide/section_nova-compute.xml226(replaceable) msgid "NOVA_PASS" msgstr "" #: ./doc/install-guide/section_nova-controller.xml146(replaceable) msgid "nova@example.com" msgstr "" #: ./doc/install-guide/section_nova-controller.xml150(para) msgid "" "Configure Compute to use these credentials with the Identity Service running" " on the controller. Replace NOVA_PASS with your " "Compute password." msgstr "" #: ./doc/install-guide/section_nova-controller.xml160(para) msgid "" "Edit the [DEFAULT] section in the " "/etc/nova/nova.conf file to add this key:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml168(para) msgid "Add these keys to the [keystone_authtoken] section:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml182(para) msgid "" "Add the credentials to the /etc/nova/api-paste.ini " "file. Add these options to the [filter:authtoken] " "section:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml187(title) #: ./doc/install-guide/section_nova-compute.xml214(title) msgid "Use of .ini files" msgstr "" #: ./doc/install-guide/section_nova-controller.xml188(para) msgid "" "You might sometimes have to edit .ini files during " "initial setup. However, do not edit these files for general configuration " "tasks." msgstr "" #: ./doc/install-guide/section_nova-controller.xml202(para) msgid "" "Ensure that the " "option is set in the /etc/nova/nova.conf file." msgstr "" #: ./doc/install-guide/section_nova-controller.xml209(para) msgid "" "You must register Compute with the Identity Service so that other OpenStack " "services can locate it. Register the service and specify the endpoint:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml217(para) msgid "" "Use the id property that is returned to create the " "endpoint." msgstr "" #: ./doc/install-guide/section_nova-controller.xml226(para) msgid "" "Start Compute services and configure them to start when the system boots:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml229(para) msgid "Restart Compute services:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml250(para) msgid "To verify your configuration, list available images:" msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml6(title) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml7(title) msgid "System requirements" msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml7(para) msgid "" "Before you install the OpenStack dashboard, you must meet the following " "system requirements:" msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml11(para) msgid "" "OpenStack Compute installation. Enable the Identity Service for user and " "project management." msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml13(para) msgid "Note the URLs of the Identity Service and Compute endpoints." msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml17(para) msgid "" "Identity Service user with sudo privileges. Because Apache does not serve " "content from a root user, users must run the dashboard as an Identity " "Service user with sudo privileges." msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml23(para) msgid "" "Python 2.6 or 2.7. The Python version must support Django. The Python " "version should run on any system, including Mac OS X. Installation " "prerequisites might differ by platform." msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml29(para) msgid "" "Then, install and configure the dashboard on a node that can contact the " "Identity Service." msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml31(para) msgid "" "Provide users with the following information so that they can access the " "dashboard through a web browser on their local machine:" msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml36(para) msgid "The public IP address from which they can access the dashboard" msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml40(para) msgid "The user name and password with which they can access the dashboard" msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml44(para) msgid "" "Your web browser, and that of your users, must support HTML5 and have " "cookies and JavaScript enabled." msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml48(para) msgid "" "To use the VNC client with the dashboard, the browser must support HTML5 " "Canvas and HTML5 WebSockets." msgstr "" #: ./doc/install-guide/section_dashboard-system-reqs.xml50(para) msgid "" "For details about browsers that support noVNC, see https://github.com/kanaka/noVNC/blob/master/README.md," " and https://github.com/kanaka/noVNC/wiki/Browser-support, " "respectively." msgstr "" #: ./doc/install-guide/section_nova-boot.xml5(title) msgid "Launch an instance" msgstr "" #: ./doc/install-guide/section_nova-boot.xml6(para) msgid "" "After you configure the Compute services, you can launch an instance. An " "instance is a virtual machine that OpenStack provisions on a Compute server." " This example shows you how to launch a low-resource instance by using a " "downloaded image." msgstr "" #: ./doc/install-guide/section_nova-boot.xml12(para) msgid "This procedure assumes you have:" msgstr "" #: ./doc/install-guide/section_nova-boot.xml15(para) msgid "" "Installed the nova client library on the machine on which you will run the " "commands (log on the controller if you are not sure)." msgstr "" #: ./doc/install-guide/section_nova-boot.xml20(para) msgid "" "Set environment variables to specify your credentials. See ." msgstr "" #: ./doc/install-guide/section_nova-boot.xml24(para) msgid "Downloaded an image. See ." msgstr "" #: ./doc/install-guide/section_nova-boot.xml28(para) msgid "Configured networking. See ." msgstr "" #: ./doc/install-guide/section_nova-boot.xml35(para) msgid "" "Generate a keypair that consists of a private and public key to be able to " "launch instances on OpenStack. These keys are injected into the instances to" " make password-less SSH access to the instance. This depends on the way the " "necessary tools are bundled into the images. For more details, see the OpenStack Admin User " "Guide." msgstr "" #: ./doc/install-guide/section_nova-boot.xml47(para) msgid "" "You have just created the mykey keypair. The " "id_rsa private key is saved locally in " "~/.ssh, which you can use to connect to an instance " "launched by using mykey as the keypair. To view available keypairs:" msgstr "" #: ./doc/install-guide/section_nova-boot.xml60(para) msgid "" "To launch an instance, you must specify the ID for the flavor you want to " "use for the instance. A flavor is a resource allocation profile. For " "example, it specifies how many virtual CPUs and how much RAM your instance " "gets. To see a list of the available profiles:" msgstr "" #: ./doc/install-guide/section_nova-boot.xml77(para) msgid "Get the ID of the image to use for the instance:" msgstr "" #: ./doc/install-guide/section_nova-boot.xml86(para) msgid "" "To use SSH and ping, you must configure security group rules. See the OpenStack " "User Guide." msgstr "" #: ./doc/install-guide/section_nova-boot.xml91(replaceable) #: ./doc/install-guide/section_nova-boot.xml92(replaceable) msgid "default" msgstr "" #: ./doc/install-guide/section_nova-boot.xml95(para) msgid "Launch the instance:" msgstr "" #: ./doc/install-guide/section_nova-boot.xml96(replaceable) msgid "flavorType" msgstr "" #: ./doc/install-guide/section_nova-boot.xml96(replaceable) msgid "keypairName" msgstr "" #: ./doc/install-guide/section_nova-boot.xml96(replaceable) #: ./doc/install-guide/app_reserved_uids.xml29(th) msgid "ID" msgstr "ID" #: ./doc/install-guide/section_nova-boot.xml96(replaceable) msgid "newInstanceName" msgstr "" #: ./doc/install-guide/section_nova-boot.xml97(para) msgid "Create an instance by using flavor 1 or 2. For example:" msgstr "" #: ./doc/install-guide/section_nova-boot.xml134(para) msgid "" "If sufficient RAM is not available for the instance, Compute creates, but " "does not start, the instance and sets the status for the instance to " "ERROR." msgstr "" #: ./doc/install-guide/section_nova-boot.xml141(para) msgid "" "After the instance launches, use the to view its status. " "The status changes from BUILD to " "ACTIVE:" msgstr "" #: ./doc/install-guide/section_nova-boot.xml159(para) msgid "To show details for a specified instance:" msgstr "" #: ./doc/install-guide/section_nova-boot.xml197(para) msgid "" "After the instance boots and initializes and you have configured security " "groups, you can into the instance without a password by " "using the keypair you specified in the command. Use the " " command to get the IP address for the instance. You do not " "need to specify the private key because it was stored in the default " "location, ~/.ssh/.id_rsa, for the " "client." msgstr "" #: ./doc/install-guide/section_nova-boot.xml207(para) msgid "" "If using a CirrOS image to spawn an instance you must log in as the " "cirros, and not the root, user." msgstr "" #: ./doc/install-guide/section_nova-boot.xml210(para) msgid "" "You can also log in to the cirros account without an ssh " "key by using the cubswin:) password:" msgstr "" #: ./doc/install-guide/section_keystone-services.xml4(title) msgid "Define services and API endpoints" msgstr "" #: ./doc/install-guide/section_keystone-services.xml5(para) msgid "" "So that the Identity Service can track which OpenStack services are " "installed and where they are located on the network, you must register each " "service in your OpenStack installation. To register a service, run these " "commands:" msgstr "" #: ./doc/install-guide/section_keystone-services.xml11(para) msgid ". Describes the service." msgstr "" #: ./doc/install-guide/section_keystone-services.xml15(para) msgid ". Associates API endpoints with the service." msgstr "" #: ./doc/install-guide/section_keystone-services.xml19(para) msgid "" "You must also register the Identity Service itself. Use the " "OS_SERVICE_TOKEN environment variable, as set previously, for " "authentication." msgstr "" #: ./doc/install-guide/section_keystone-services.xml24(para) msgid "Create a service entry for the Identity Service:" msgstr "" #: ./doc/install-guide/section_keystone-services.xml35(para) #: ./doc/install-guide/object-storage/section_object-storage-install.xml93(para) msgid "" "The service ID is randomly generated and is different from the one shown " "here." msgstr "" #: ./doc/install-guide/section_keystone-services.xml39(para) msgid "" "Specify an API endpoint for the Identity Service by using the returned " "service ID. When you specify an endpoint, you provide URLs for the public " "API, internal API, and admin API. In this guide, the " "controller host name is used. Note that the Identity " "Service uses a different port for the admin API." msgstr "" #: ./doc/install-guide/section_keystone-services.xml62(para) msgid "" "You will need to create an additional endpoint for each service added to " "your OpenStack environment. The sections of this guide associated with the " "installation of each service include the endpoint creation step specific to " "the service." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml6(title) msgid "Verify the Identity Service installation" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml9(para) msgid "" "To verify that the Identity Service is installed and configured correctly, " "clear the values in the OS_SERVICE_TOKEN and " "OS_SERVICE_ENDPOINT environment variables:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml15(para) msgid "" "These variables, which were used to bootstrap the administrative user and " "register the Identity Service, are no longer needed." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml20(para) msgid "You can now use regular user name-based authentication." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml22(para) msgid "" "Request a authentication token by using the admin user " "and the password you chose for that user:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml27(para) msgid "" "In response, you receive a token paired with your user ID. This verifies " "that the Identity Service is running on the expected endpoint and that your " "user account is established with the expected credentials." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml33(para) msgid "" "Verify that authorization behaves as expected. To do so, request " "authorization on a tenant:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml37(para) msgid "" "In response, you receive a token that includes the ID of the tenant that you" " specified. This verifies that your user account has an explicitly defined " "role on the specified tenant and the tenant exists as expected." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml43(para) msgid "" "You can also set your --os-* variables in your " "environment to simplify command-line usage. Set up a " "openrc.sh file with the admin credentials and admin " "endpoint:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml53(para) msgid "Source this file to read in the environment variables:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml58(para) msgid "" "Verify that your openrc.sh file is configured " "correctly. Run the same command without the --os-* " "arguments:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml62(para) msgid "" "The command returns a token and the ID of the specified tenant. This " "verifies that you have configured your environment variables correctly." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml67(para) msgid "" "Verify that your admin account has authorization to perform administrative " "commands:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml75(para) msgid "" "This verifies that your user account has the admin role, " "which matches the role used in the Identity Service " "policy.json file." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml80(para) msgid "" "As long as you define your credentials and the Identity Service endpoint " "through the command line or environment variables, you can run all OpenStack" " client commands from any machine. For details, see ." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml15(None) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml863(None) msgid "" "@@image: '../common/figures/UseCase-MultiRouter.png'; " "md5=5695d4b003e2f8442eab135cbcd1f842" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml25(None) msgid "" "@@image: '../common/figures/demo_routers_with_private_networks.png'; " "md5=985b8cacfd7161ce50ee13106b27f854" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml6(title) msgid "Per-tenant routers with private networks" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml7(para) msgid "" "This section describes how to install the OpenStack Networking service and " "its components for a use case that has per-tenant routers with private " "networks." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml19(para) msgid "The following figure shows the setup:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml29(para) msgid "As shown in the figure, the setup includes:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml32(para) msgid "An interface for management traffic on each node." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml36(para) msgid "Use of the Open vSwitch plug-in." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml39(para) msgid "GRE tunnels for data transport on all agents." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml42(para) msgid "" "Floating IPs and router gateway ports that are configured in an external " "network, and a physical router that connects the floating IPs and router " "gateway ports to the outside world." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml49(para) msgid "" "Because this example runs a DHCP agent and L3 agent on one node, you must " "set the use_namespace option to True " "in the configuration file for each agent. The default is " "True." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml55(para) msgid "This table describes the nodes:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml61(th) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml31(th) #: ./doc/install-guide/section_neutron-single-flat.xml32(th) msgid "Node" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml62(th) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml32(th) #: ./doc/install-guide/app_reserved_uids.xml28(th) #: ./doc/install-guide/section_neutron-single-flat.xml33(th) msgid "Description" msgstr "Description" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml67(td) #: ./doc/install-guide/section_neutron-single-flat.xml38(td) msgid "Controller Node" msgstr "Noeud Contrôleur" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml68(para) msgid "" "Runs Networking, Identity Service, and all Compute services that are " "required to deploy VMs (nova-api," " nova-scheduler, for example). " "The node must have at least one network interface, which connects to the " "Management Network. The host name is controlnode, which " "other nodes resolve to the IP of the controller node." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml80(para) msgid "" "The nova-network service should " "not be running. This is replaced by Networking." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml87(td) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml282(title) #: ./doc/install-guide/section_neutron-single-flat.xml70(td) msgid "Compute Node" msgstr "Noeud de Calcul" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml90(systemitem) #: ./doc/install-guide/section_neutron-single-flat.xml73(systemitem) msgid "nova-compute" msgstr "nova-compute" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml92(systemitem) msgid "nova-*" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml88(td) msgid "" "Runs the Networking L2 agent and the Compute services that run VMs " "( specifically, and optionally other " "services depending on configuration). The node must have at least two " "network interfaces. One interface communicates with the controller node " "through the management network. The other node is used for the VM traffic on" " the data network. The VM receives its IP address from the DHCP agent on " "this network." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml101(td) #: ./doc/install-guide/section_neutron-single-flat.xml84(td) msgid "Network Node" msgstr "Noeud Réseau" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml102(td) msgid "" "Runs Networking L2 agent, DHCP agent and L3 agent. This node has access to " "the external network. The DHCP agent allocates IP addresses to the VMs on " "data network. (Technically, the addresses are allocated by the Networking " "server, and distributed by the dhcp agent.) The node must have at least two " "network interfaces. One interface communicates with the controller node " "through the management network. The other interface is used as external " "network. GRE tunnels are set up as data networks." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml115(td) #: ./doc/install-guide/section_neutron-single-flat.xml94(td) msgid "Router" msgstr "Routeur" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml116(td) #: ./doc/install-guide/section_neutron-single-flat.xml95(td) msgid "" "Router has IP 30.0.0.1, which is the default gateway for all VMs. The router" " must be able to access public networks." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml122(para) msgid "The use case assumes the following:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml123(emphasis) #: ./doc/install-guide/section_neutron-single-flat.xml102(emphasis) msgid "Controller node" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml126(para) #: ./doc/install-guide/section_neutron-single-flat.xml105(para) msgid "Relevant Compute services are installed, configured, and running." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml130(para) msgid "" "Glance is installed, configured, and running. In addition, an image named " "tty must be present." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml135(para) msgid "" "Identity is installed, configured, and running. A Networking user named " "neutron should be created on tenant " "service with password " "NEUTRON_PASS." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml145(para) msgid "" "RabbitMQ is running with default guest and password " "RABBIT_PASS." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml150(para) #: ./doc/install-guide/section_neutron-single-flat.xml133(para) msgid "MySQL server (user is root)." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml143(para) msgid "Additional services: " msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml156(emphasis) #: ./doc/install-guide/section_neutron-single-flat.xml139(emphasis) msgid "Compute node" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml157(para) msgid "Install and configure Compute." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml159(title) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml92(title) #: ./doc/install-guide/section_neutron-single-flat.xml146(title) msgid "Install" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml162(emphasis) #: ./doc/install-guide/section_neutron-single-flat.xml149(emphasis) msgid "Controller node - Networking server" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml166(para) #: ./doc/install-guide/section_neutron-single-flat.xml154(para) msgid "Install the Networking server." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml169(para) #: ./doc/install-guide/section_neutron-single-flat.xml168(para) msgid "Create database ovs_neutron." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml173(para) msgid "" "Update the Networking configuration file, " "/etc/neutron/neutron.conf, with plug-in choice and Identity " "Service user as necessary:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml186(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml199(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml276(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml117(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml183(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml187(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml193(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml326(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml330(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml336(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml193(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml234(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml337(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml346(replaceable) #: ./doc/install-guide/section_neutron-install.xml141(replaceable) #: ./doc/install-guide/section_neutron-install.xml143(replaceable) #: ./doc/install-guide/section_neutron-install.xml336(replaceable) #: ./doc/install-guide/section_neutron-install.xml343(replaceable) #: ./doc/install-guide/section_neutron-install.xml902(replaceable) #: ./doc/install-guide/section_neutron-install.xml909(replaceable) #: ./doc/install-guide/section_neutron-install.xml1210(replaceable) #: ./doc/install-guide/section_neutron-install.xml1220(replaceable) msgid "NEUTRON_DBPASS" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml191(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml236(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml133(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml226(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml238(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml190(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml239(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml283(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml299(replaceable) #: ./doc/install-guide/section_neutron-install.xml149(replaceable) #: ./doc/install-guide/section_neutron-install.xml268(replaceable) #: ./doc/install-guide/section_neutron-install.xml290(replaceable) #: ./doc/install-guide/section_neutron-install.xml359(replaceable) #: ./doc/install-guide/section_neutron-install.xml371(replaceable) #: ./doc/install-guide/section_neutron-install.xml441(replaceable) #: ./doc/install-guide/section_neutron-install.xml455(replaceable) #: ./doc/install-guide/section_neutron-install.xml849(replaceable) #: ./doc/install-guide/section_neutron-install.xml883(replaceable) #: ./doc/install-guide/section_neutron-install.xml920(replaceable) #: ./doc/install-guide/section_neutron-install.xml934(replaceable) #: ./doc/install-guide/section_neutron-install.xml951(replaceable) #: ./doc/install-guide/section_neutron-install.xml968(replaceable) #: ./doc/install-guide/section_neutron-install.xml1243(replaceable) #: ./doc/install-guide/section_neutron-install.xml1269(replaceable) #: ./doc/install-guide/section_neutron-install.xml1285(replaceable) #: ./doc/install-guide/section_neutron-install.xml1301(replaceable) #: ./doc/install-guide/section_neutron-install.xml1370(replaceable) #: ./doc/install-guide/section_neutron-install.xml1387(replaceable) msgid "NEUTRON_PASS" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml202(para) msgid "" "Update the plug-in configuration file, " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml210(para) msgid "Start the Networking server." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml211(para) msgid "" "The Networking server can be a service of the operating system. The command " "to start the service depends on your operating system. The following command" " runs the Networking server directly:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml223(emphasis) msgid "Compute node—Compute" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml225(para) msgid "Install Compute services." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml228(para) msgid "" "Update the Compute /etc/nova/nova.conf configuration " "file. Make sure the following line appears at the end of this file:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml243(para) msgid "Restart relevant Compute services." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml249(emphasis) msgid "Compute and Networking node—L2 agent" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml253(para) msgid "Install and start Open vSwitch." msgstr "Installer et démarrer Open vSwitch" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml256(para) msgid "Install the L2 agent (Neutron Open vSwitch agent)." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml260(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml170(para) msgid "Add the integration bridge to the Open vSwitch:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml265(para) msgid "" "Update the Networking configuration file, " "/etc/neutron/neutron.conf:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml279(para) msgid "" "Update the plug-in configuration file, " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml282(para) msgid "Compute node:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml288(para) msgid "Network node:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml296(para) msgid "Create the integration bridge br-int:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml301(para) msgid "Start the Networking L2 agent" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml302(para) msgid "" "The Networking Open vSwitch L2 agent can be a service of operating system. " "The command to start depends on your operating systems. The following " "command runs the service directly:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml313(emphasis) msgid "Network node—DHCP agent" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml317(para) #: ./doc/install-guide/section_neutron-single-flat.xml412(para) msgid "Install the DHCP agent." msgstr "Installer l'agent DHCP" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml320(para) msgid "" "Update the Networking configuration file, " "/etc/neutron/neutron.conf" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml331(literal) msgid "allow_overlapping_ips" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml330(emphasis) msgid "" "Set because TenantA and TenantC use overlapping subnets." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml336(para) msgid "" "Update the DHCP /etc/neutron/dhcp_agent.ini " "configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml342(para) msgid "Start the DHCP agent." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml343(para) msgid "" "The Networking DHCP agent can be a service of operating system. The command " "to start the service depends on your operating system. The following command" " runs the service directly:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml354(emphasis) msgid "Network node—L3 agent" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml358(para) msgid "Install the L3 agent." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml361(para) msgid "Add the external network bridge" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml365(para) msgid "" "Add the physical interface, for example eth0, that is connected to the " "outside network to this bridge:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml371(para) msgid "" "Update the L3 configuration file " "/etc/neutron/l3_agent.ini:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml378(literal) msgid "use_namespaces" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml377(emphasis) msgid "" "Set the option (it is True by default) because TenantA and " "TenantC have overlapping subnets, and the routers are hosted on one l3 agent" " network node." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml386(para) msgid "Start the L3 agent" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml387(para) msgid "" "The Networking L3 agent can be a service of operating system. The command to" " start the service depends on your operating system. The following command " "starts the agent directly:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml401(title) #: ./doc/install-guide/section_neutron-single-flat.xml475(title) msgid "Configure logical network" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml402(para) msgid "You can run these commands on the network node." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml404(para) msgid "" "Ensure that the following environment variables are set. Various clients use" " these to access the Identity Service." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml414(para) #: ./doc/install-guide/section_neutron-single-flat.xml488(para) msgid "Get the tenant ID (Used as $TENANT_ID later):" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml428(para) msgid "Get user information:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml441(para) msgid "Create the external network and its subnet by admin user:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml479(literal) msgid "provider:network_type local" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml482(literal) msgid "router:external true" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml478(emphasis) msgid "" " means that Networking does not have to realize this network" " through provider network. means that an external network " "is created where you can create floating IP and router gateway port." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml488(para) msgid "Add an IP on external network to br-ex." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml489(para) msgid "" "Because br-ex is the external network bridge, add an IP 30.0.0.100/24 to br-" "ex and ping the floating IP of the VM from our network node." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml497(para) msgid "Serve TenantA." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml498(para) msgid "" "For TenantA, create a private network, subnet, server, router, and floating " "IP." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml502(para) msgid "Create a network for TenantA:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml518(para) msgid "" "After that, you can use admin user to query the provider network " "information:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml537(para) msgid "" "The network has GRE tunnel ID (for example, provider:segmentation_id) 1." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml542(para) msgid "Create a subnet on the network TenantA-Net:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml564(para) msgid "Create a server for TenantA:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml576(para) msgid "" "It is important to understand that you should not attach the instance to " "Ext-Net directly. Instead, you must use a floating IP to make it accessible " "from the external network." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml585(para) msgid "Create and configure a router for TenantA:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml603(para) msgid "Added interface to router TenantA-R1" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml612(para) msgid "Associate a floating IP for TenantA_VM1." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml616(para) msgid "Create a floating IP:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml633(para) msgid "" "Get the port ID of the VM with ID 7c5e6499-7ef7-4e36-8216-62c2941d21ff:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml645(para) msgid "Associate the floating IP with the VM port:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml663(para) msgid "Ping the public network from the server of TenantA." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml665(para) msgid "" "In my environment, 192.168.1.0/24 is my public network connected with my " "physical router, which also connects to the external network 30.0.0.0/24. " "With the floating IP and virtual router, you can ping the public network " "within the server of tenant A:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml683(para) msgid "Ping floating IP of the TenantA's server:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml696(para) msgid "Create other servers for TenantA." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml697(para) msgid "You can create more servers for TenantA and add floating IPs for them." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml701(para) msgid "Serve TenantC." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml702(para) msgid "" "For TenantC, you create two private networks with subnet 10.0.0.0/24 and " "subnet 10.0.1.0/24, some servers, one router to connect to these two subnets" " and some floating IPs." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml708(para) msgid "Create networks and subnets for TenantC:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml721(para) msgid "" "After that you can use admin user to query the network's provider network " "information:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml757(para) msgid "" "You can see GRE tunnel IDs (such as, provider:segmentation_id) 2 and 3. And " "also note the network IDs and subnet IDs because you use them to create VMs " "and router." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml764(para) msgid "Create a server TenantC-VM1 for TenantC on TenantC-Net1." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml771(para) msgid "Create a server TenantC-VM3 for TenantC on TenantC-Net2." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml778(para) msgid "List servers of TenantC." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml787(para) msgid "Note the server IDs because you use them later." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml791(para) msgid "Make sure servers get their IPs." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml792(para) msgid "" "You can use VNC to log on the VMs to check if they get IPs. If not, you must" " make sure that the Networking components are running correctly and the GRE " "tunnels work." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml799(para) msgid "Create and configure a router for TenantC:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml814(para) msgid "Checkpoint: ping from within TenantC's servers." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml816(para) msgid "" "Because a router connects to two subnets, the VMs on these subnets can ping " "each other. And because the gateway for the router is set, TenantC's servers" " can ping external network IPs, such as 192.168.1.1, 30.0.0.1, and so on." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml824(para) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml835(para) msgid "Associate floating IPs for TenantC's servers." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml826(para) msgid "" "Because a router connects to two subnets, the VMs on these subnets can ping " "each other. And because the gateway interface for the router is set, " "TenantC's servers can ping external network IPs, such as 192.168.1.1, " "30.0.0.1, and so on." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml837(para) msgid "" "You can use similar commands to the ones used in the section for TenantA." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml845(title) msgid "Use case: per-tenant routers with private networks" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml847(para) msgid "" "This use case represents a more advanced router scenario in which each " "tenant gets at least one router, and potentially has access to the " "Networking API to create additional routers. The tenant can create their own" " networks, potentially uplinking those networks to a router. This model " "enables tenant-defined, multi-tier applications, with each tier being a " "separate network behind the router. Because there are multiple routers, " "tenant subnets can overlap without conflicting, because access to external " "networks all happens through SNAT or floating IPs. Each router uplink and " "floating IP is allocated from the external network subnet." msgstr "" #: ./doc/install-guide/ch_horizon.xml6(title) msgid "Add the dashboard" msgstr "" #: ./doc/install-guide/ch_horizon.xml7(para) msgid "" "The OpenStack dashboard, also known as Horizon, is a Web " "interface that enables cloud administrators and users to manage various " "OpenStack resources and services." msgstr "" #: ./doc/install-guide/ch_horizon.xml12(para) msgid "" "The dashboard enables web-based interactions with the OpenStack Compute " "cloud controller through the OpenStack APIs." msgstr "" #: ./doc/install-guide/ch_horizon.xml15(para) msgid "" "These instructions show an example deployment configured with an Apache web " "server." msgstr "" #: ./doc/install-guide/ch_horizon.xml17(para) msgid "" "After you install and configure the " "dashboard, you can complete the following tasks:" msgstr "" #: ./doc/install-guide/ch_horizon.xml22(para) msgid "" "Customize your dashboard. See section Customize the dashboard in the OpenStack Cloud Administrator " "Guide." msgstr "" #: ./doc/install-guide/ch_horizon.xml30(para) msgid "" "Set up session storage for the dashboard. See ." msgstr "" #: ./doc/install-guide/section_heat-verify.xml6(title) msgid "Verify the Orchestration service installation" msgstr "" #: ./doc/install-guide/section_heat-verify.xml8(para) msgid "" "To verify that the Orchestration service is installed and configured " "correctly, make sure that your credentials are set up correctly in the " "openrc.sh file. Source the file, as follows:" msgstr "" #: ./doc/install-guide/section_heat-verify.xml14(para) msgid "Next, create some stacks by using the samples." msgstr "" #: ./doc/install-guide/ch_ceilometer.xml6(title) msgid "Add the Telemetry service" msgstr "" #: ./doc/install-guide/ch_ceilometer.xml8(para) msgid "" "The OpenStack Telemetry service provides a framework for monitoring and " "metering the OpenStack cloud. It is also known as the Ceilometer project." msgstr "" #: ./doc/install-guide/ch_keystone.xml6(title) msgid "Configure the Identity Service" msgstr "" #: ./doc/install-guide/ch_heat.xml6(title) msgid "Add the Orchestration service" msgstr "" #: ./doc/install-guide/ch_heat.xml7(para) msgid "" "Use the OpenStack Orchestration service to create cloud resources using a " "template language called HOT. The integrated project name is Heat." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-rabbitqm.xml15(None) msgid "" "@@image: 'figures/debconf-screenshots/rabbitmq-host.png'; " "md5=5353ad857884a2d31847cf82efbdc6b6" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-rabbitqm.xml22(None) msgid "" "@@image: 'figures/debconf-screenshots/rabbitmq-user.png'; " "md5=33a3c1182e79ed65f1b1b63f2156792c" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-rabbitqm.xml29(None) msgid "" "@@image: 'figures/debconf-screenshots/rabbitmq-password.png'; " "md5=6385185200d20e96b6316ae15ae1255d" msgstr "" #: ./doc/install-guide/section_debconf-rabbitqm.xml6(title) msgid "RabbitMQ credentials parameters" msgstr "" #: ./doc/install-guide/section_debconf-rabbitqm.xml7(para) msgid "" "For every package that must connect to a Messaging Server, the Debian " "package enables you to configure the IP address for that server and the user" " name and password that is used to connect. The following example shows " "configuration with the ceilometer-" "common package:" msgstr "" #: ./doc/install-guide/section_debconf-rabbitqm.xml33(para) msgid "" "These debconf screens appear in: ceilometer-" "common, cinder-" "common, glance-" "common, heat-common," " neutron-common and nova-common." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml16(None) #: ./doc/install-guide/ch_overview.xml95(None) msgid "" "@@image: '../common/figures/Neutron-PhysNet-Diagram.png'; " "md5=ac17dba8837f9d7ba714a692c60e68ab" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml651(None) msgid "" "@@image: '../common/figures/UseCase-SingleRouter.png'; " "md5=63d21d52d32ed7fa1c1dad1a1fd88eb5" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml6(title) msgid "Provider router with private networks" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml7(para) msgid "" "This section describes how to install the OpenStack Networking service and " "its components for a single router use case: a provider router with private " "networks." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml10(para) msgid "This figure shows the set up:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml21(para) msgid "" "Because you run the DHCP agent and L3 agent on one node, you must set " "use_namespaces to True (which is the " "default) in the configuration files for both agents." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml26(para) msgid "The configuration includes these nodes:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml28(caption) msgid "Nodes for use case" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml37(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml94(title) msgid "Controller" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml38(para) msgid "" "Runs the Networking service, Identity Service, and all Compute services that" " are required to deploy a VM." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml42(para) msgid "" "The service must have at least two network interfaces. The first should be " "connected to the Management Network to communicate with the compute and " "network nodes. The second interface should be connected to the API/public " "network." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml50(para) msgid "Compute" msgstr "Compute" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml51(para) msgid "Runs Compute and the Networking L2 agent." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml53(para) msgid "This node does not have access the public network." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml55(para) msgid "" "The node must have a network interface that communicates with the controller" " node through the management network. The VM receives its IP address from " "the DHCP agent on this network." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml62(para) msgid "Network" msgstr "Réseau" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml63(para) msgid "Runs Networking L2 agent, DHCP agent, and L3 agent." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml65(para) msgid "" "This node has access to the public network. The DHCP agent allocates IP " "addresses to the VMs on the network. The L3 agent performs NAT and enables " "the VMs to access the public network." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml72(para) msgid "" "A network interface that communicates with the controller node through the " "management network" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml78(para) msgid "A network interface on the data network that manages VM traffic" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml83(para) msgid "" "A network interface that connects to the external gateway on the network" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml70(para) msgid "The node must have:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml96(title) msgid "To install and configure the controller node" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml99(para) #: ./doc/install-guide/section_nova-compute.xml56(para) msgid "Run this command:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml105(para) msgid "Configure Networking services:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml108(para) msgid "" "Edit the /etc/neutron/neutron.conf file and add these " "lines:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml120(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml339(para) msgid "" "Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini file and " "add these lines:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml128(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml231(para) msgid "" "Edit the /etc/neutron/api-paste.ini file and add these" " lines:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml138(para) msgid "Start the services:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml145(title) msgid "Network node" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml147(title) msgid "To install and configure the network node" msgstr "" #. FIXME Review Fedora instructions #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml150(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml289(para) msgid "Install the packages:" msgstr "Installez les paquets:" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml159(para) msgid "" "Start Open vSwitch and " "configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml175(para) msgid "" "Update the OpenStack Networking " "/etc/neutron/neutron.conf configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml196(para) msgid "" "Update the plug-in " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini " "configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml205(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml310(para) msgid "" "Create the br-eth1 network bridge. All VM communication " "between the nodes occurs through br-eth1:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml213(para) msgid "Create the external network bridge to the Open vSwitch:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml219(para) msgid "" "Edit the /etc/neutron/l3_agent.ini file and add these " "lines:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml241(para) msgid "" "Edit the /etc/neutron/dhcp_agent.ini file and add this" " line:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml247(para) msgid "Restart networking services:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml253(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml353(para) msgid "Start and permanently enable networking services:" msgstr "" #. FIXME: Required on Debian/Ubuntu? #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml270(para) msgid "" "Enable the neutron-ovs-cleanup " "service. This service starts on boot and ensures that Networking has full " "control over the creation and management of tap devices." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml285(title) msgid "To install and configure the compute node" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml295(para) msgid "" "Start the OpenvSwitch service and configure it to start when the " "system boots:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml306(para) msgid "Create the integration bridge:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml318(para) msgid "" "Edit the OpenStack Networking " "/etc/neutron/neutron.conf configuration file and add this line:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml348(para) msgid "Restart the OpenvSwitch Neutron plug-in agent:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml364(title) msgid "Logical network configuration" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml366(para) msgid "Run these commands on the network node." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml367(para) #: ./doc/install-guide/section_neutron-single-flat.xml478(para) msgid "" "Ensure that the following environment variables are set. Various clients use" " these variables to access the Identity Service." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml373(para) msgid "Create a novarc file:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml386(para) msgid "Export the variables:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml390(para) msgid "" "The admin user creates a network and subnet on behalf of tenant_A. A " "tenant_A user can also complete these steps." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml394(title) msgid "To configure internal networking" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml396(para) msgid "Get the tenant ID (Used as $TENANT_ID later)." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml409(para) msgid "" "Create an internal network named net1 for" " tenant_A ($TENANT_ID will be e40fa60181524f9f9ee7aa1038748f08):" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml431(para) msgid "" "Create a subnet on the network net1 (ID " "field below is used as $SUBNET_ID later):" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml452(para) msgid "" "A user with the admin role must complete these steps. In this procedure, the" " user is admin from provider_tenant." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml456(title) msgid "To configure the router and external networking" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml459(para) msgid "" "Create a router1 route. The ID is used as" " $ROUTER_ID later:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml474(para) msgid "" "The --tenant-id parameter is not specified, so this " "router is assigned to the provider_tenant tenant." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml480(para) msgid "" "Add an interface to the router1 router and attach it to " "the subnet from net1:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml487(para) msgid "" "You can repeat this step to add more interfaces for other networks that " "belong to other tenants." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml493(para) msgid "Create the ext_net external network:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml513(para) msgid "Create the subnet for floating IPs." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml515(para) msgid "The DHCP service is disabled for this subnet." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml538(para) msgid "Set the gateway for the router to the external network:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml544(para) msgid "" "A user from tenant_A completes these steps, so the credentials in the " "environment variables are different than those in the previous procedure." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml548(title) msgid "To allocate floating IP addresses" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml550(para) msgid "" "You can associate a floating IP address with a VM after it starts. Find the " "ID of the port ($PORT_ID) that was allocated for the VM, as follows:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml569(para) msgid "Allocate a floating IP (Used as $FLOATING_ID):" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml585(para) msgid "Associate the floating IP with the port for the VM:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml591(para) msgid "Show the floating IP:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml606(para) msgid "Test the floating IP:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml616(title) msgid "Use case: provider router with private networks" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml617(para) msgid "" "This use case provides each tenant with one or more private networks that " "connect to the outside world through an OpenStack Networking router. When " "each tenant gets exactly one network, this architecture maps to the same " "logical topology as the VlanManager in Compute (although of course, " "Networking does not require VLANs). Using the Networking API, the tenant can" " only see a network for each private network assigned to that tenant. The " "router object in the API is created and owned by the cloud administrator." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml627(para) msgid "" "This model supports assigning public addresses to VMs by using floating IPs; the router maps public " "addresses from the external network to fixed IPs on private networks. Hosts " "without floating IPs can still create outbound connections to the external " "network because the provider router performs SNAT to the router's external " "IP. The IP address of the physical router is used as the " "gateway_ip of the external network subnet, so the " "provider has a default router for Internet traffic." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml638(para) msgid "" "The router provides L3 connectivity among private networks. Tenants can " "reach instances for other tenants unless you use additional filtering, such " "as, security groups). With a single router, tenant networks cannot use " "overlapping IPs. To resolve this issue, the administrator can create private" " networks on behalf of the tenants." msgstr "" #: ./doc/install-guide/ch_nova.xml7(title) msgid "Configure Compute services" msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml7(title) msgid "Add the Block Storage Service agent for the Telemetry service" msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml11(para) msgid "" "To retrieve volume samples, you must configure the Block Storage Service to " "send notifications to the bus." msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml14(para) msgid "" "Edit /etc/cinder/cinder.conf and add in the " "[DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml19(para) #: ./doc/install-guide/section_ceilometer-glance.xml19(para) #: ./doc/install-guide/section_heat-install.xml92(para) msgid "Run the following commands:" msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml25(para) msgid "Restart the Block Storage services with their new settings:" msgstr "" #: ./doc/install-guide/section_nova-network.xml5(title) msgid "Configure networking" msgstr "" #: ./doc/install-guide/section_nova-network.xml6(para) msgid "" "Configuring networking in OpenStack can be a bewildering experience. The " "following example shows the simplest production-ready configuration that is " "available: the legacy networking in OpenStack Compute, with a flat network, " "that takes care of DHCP." msgstr "" #: ./doc/install-guide/section_nova-network.xml11(para) msgid "" "This set up uses multi-host functionality. Networking is configured to be " "highly available by distributing networking functionality across multiple " "hosts. As a result, no single network controller acts as a single point of " "failure. This process configures each compute node for networking." msgstr "" #: ./doc/install-guide/section_nova-network.xml17(para) msgid "Choose one of these options to configure networking in OpenStack:" msgstr "" #: ./doc/install-guide/section_nova-network.xml20(para) msgid "Legacy networking in OpenStack Compute, which is described here." msgstr "" #: ./doc/install-guide/section_nova-network.xml24(para) msgid "" "The full software-defined networking stack. See ." msgstr "" #: ./doc/install-guide/section_nova-network.xml31(para) msgid "" "Install the appropriate packages for compute networking on the compute node " "only. These packages are not required on the controller node." msgstr "" #: ./doc/install-guide/section_nova-network.xml34(para) msgid "" "So that the nova-network service " "can forward metadata requests on each compute node, each compute node must " "install the nova-api-metadata " "service, as follows:" msgstr "" #: ./doc/install-guide/section_nova-network.xml44(para) msgid "" "Edit the nova.conf file to define the networking mode:" msgstr "" #: ./doc/install-guide/section_nova-network.xml81(para) msgid "" "Provide a local metadata service that is reachable from instances on this " "compute node. Perform this step only on compute nodes that do not run the " "nova-api service." msgstr "" #: ./doc/install-guide/section_nova-network.xml90(para) msgid "Restart the network service:" msgstr "" #: ./doc/install-guide/section_nova-network.xml92(para) msgid "" "Start the network service and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_nova-network.xml99(para) msgid "" "Create a network that virtual machines can use. Do this once for the entire " "installation and not on each compute node. Run the command " "on the controller:" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml6(title) #: ./doc/install-guide/app_reserved_uids.xml24(caption) msgid "Reserved user IDs" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml8(para) msgid "" "In OpenStack, certain user IDs are reserved and used to run specific " "OpenStack services and own specific OpenStack files. These users are set up " "according to the distribution packages. The following table gives an " "overview." msgstr "" #: ./doc/install-guide/app_reserved_uids.xml16(para) msgid "" "Some OpenStack packages generate and assign user IDs automatically during " "package installation. In these cases, the user ID value is not important. " "The existence of the user ID is what matters." msgstr "" #: ./doc/install-guide/app_reserved_uids.xml27(th) msgid "Name" msgstr "Nom" #: ./doc/install-guide/app_reserved_uids.xml35(td) msgid "ceilometer" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml36(td) msgid "openstack-ceilometer" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml37(td) msgid "OpenStack Ceilometer Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml38(td) msgid "166" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml39(td) #: ./doc/install-guide/app_reserved_uids.xml46(td) #: ./doc/install-guide/app_reserved_uids.xml53(td) #: ./doc/install-guide/app_reserved_uids.xml60(td) #: ./doc/install-guide/app_reserved_uids.xml67(td) #: ./doc/install-guide/app_reserved_uids.xml74(td) #: ./doc/install-guide/app_reserved_uids.xml82(td) #: ./doc/install-guide/app_reserved_uids.xml89(td) msgid "Assigned during package installation" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml42(td) msgid "cinder" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml43(td) msgid "openstack-cinder" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml44(td) msgid "OpenStack Cinder Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml45(td) msgid "165" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml49(td) msgid "glance" msgstr "glance" #: ./doc/install-guide/app_reserved_uids.xml50(td) msgid "openstack-glance" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml51(td) msgid "OpenStack Glance Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml52(td) msgid "161" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml56(td) msgid "heat" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml57(td) msgid "openstack-heat" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml58(td) msgid "OpenStack Heat Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml59(td) msgid "187" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml63(td) msgid "keystone" msgstr "Keystone" #: ./doc/install-guide/app_reserved_uids.xml64(td) msgid "openstack-keystone" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml65(td) msgid "OpenStack Keystone Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml66(td) msgid "163" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml70(td) msgid "neutron" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml71(td) msgid "openstack-neutron" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml72(td) msgid "OpenStack Neutron Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml73(td) msgid "164" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml77(td) msgid "nova" msgstr "nova" #: ./doc/install-guide/app_reserved_uids.xml78(td) msgid "openstack-nova" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml79(td) msgid "OpenStack Nova Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml80(td) msgid "162" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml81(td) msgid "96" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml85(td) msgid "swift" msgstr "swift" #: ./doc/install-guide/app_reserved_uids.xml86(td) msgid "openstack-swift" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml87(td) msgid "OpenStack Swift Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml88(td) msgid "160" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml93(para) msgid "Each user belongs to a user group with the same name as the user." msgstr "" #: ./doc/install-guide/ch_preface.xml10(title) msgid "Preface" msgstr "Preface" #: ./doc/install-guide/section_ceilometer-glance.xml6(title) msgid "Add the Image Service agent for the Telemetry service" msgstr "" #: ./doc/install-guide/section_ceilometer-glance.xml9(para) msgid "" "To retrieve image samples, you must configure the Image Service to send " "notifications to the bus." msgstr "" #: ./doc/install-guide/section_ceilometer-glance.xml12(para) msgid "" "Edit /etc/glance/glance-api.conf and modify the " "[DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-glance.xml28(para) msgid "Restart the Image services with their new settings:" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml7(title) msgid "debconf concepts" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml8(para) msgid "" "This chapter explains how to use the Debian debconf and dbconfig-common packages to configure OpenStack services. " "These packages enable users to perform configuration tasks. When users " "install OpenStack packages, debconf prompts the user for " "responses, which seed the contents of configuration files associated with " "that package. After package installation, users can update the configuration" " of a package by using the program." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml18(para) msgid "" "If you are familiar with these packages and pre-seeding, you can proceed to " "." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml21(title) msgid "The Debian packages" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml22(para) msgid "" "The rules described here are from the Debian Policy Manual. If any" " rule described in this chapter is not respected, you have found a serious " "bug that must be fixed." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml27(para) msgid "" "When you install or upgrade a Debian package, all configuration file values " "are preserved. Using the debconf " "database as a registry is considered a bug in Debian. If you edit something " "in any OpenStack configuration file, the debconf package reads that value when it " "prepares to prompt the user. For example, to change the log in name for the " "RabbitMQ messaging queue for a service, you can edit its value in the " "corresponding configuration file." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml36(para) msgid "" "To opt out of using the debconf " "package, run the command and select non-interactive mode:" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml41(para) msgid "" "Then, debconf does not prompt " "you." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml43(para) msgid "" "Another way to disable the debconf package is to prefix the " " command with " "DEBIAN_FRONTEND=noninteractive, as follows:" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml49(para) msgid "" "If you configure a package with debconf incorrectly, you can re-configure it," " as follows:" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml52(replaceable) msgid "PACKAGE-NAME" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml53(para) msgid "" "This calls the post-installation script for the PACKAGE-" "NAME package after the user responds to all prompts. If you " "cannot install a Debian package in a non-interactive way, you have found a " "release-critical bug in Debian. Report it to the Debian bug tracking system." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml58(para) msgid "" "Generally, the -common packages " "install the configuration files. For example, the glance-" "common package installs the glance-api.conf " "and glance-registry.conf files. So, for the Image " "Service, you must re-configure the glance-common package." " The same applies for cinder-common, nova-" "common, and heat-common packages." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml68(para) msgid "" "In debconf, the higher the " "priority for a screen, the greater the chance that the user sees that " "screen. If a debconf screen has " "medium priority and you configure the Debian system to " "show only critical prompts, which is the default in " "Debian, the user does not see that debconf screen. Instead, the default for the " "related package is used. In the Debian OpenStack packages, a number of " "debconf screens are set with " "medium priority. Consequently, if you want to respond to " "all debconf screens from the " "Debian OpenStack packages, you must run the following command and select the" " medium priority before you install any packages:" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml87(para) msgid "" "The packages do not require pre-depends. If dbconfig-common is already installed on the system, the user" " sees all prompts. However, you cannot define the order in which the " "debconf screens appear. The user " "must make sense of it even if the prompts appear in an illogical order." msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml6(title) msgid "Add the Object Storage agent for the Telemetry service" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml9(para) msgid "" "To retrieve object store statistics, the Telemetry service needs access to " "Object Storage with the ResellerAdmin role. Give this " "role to your os_username user for the " "os_tenant_name tenant:" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml23(replaceable) msgid "462fa46c13fd4798a95a3bfbe27b5e54" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml26(para) msgid "" "You must also add the Telemetry middleware to Object Storage to handle " "incoming and outgoing traffic. Add these lines to the /etc/swift" "/proxy-server.conf file:" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml35(para) msgid "" "Add ceilometer to the pipeline " "parameter of that same file:" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml41(para) #: ./doc/install-guide/section_heat-install.xml150(para) #: ./doc/install-guide/section_ceilometer-nova.xml68(para) msgid "Restart the service with its new settings:" msgstr "" #: ./doc/install-guide/section_debconf-preseeding.xml6(title) msgid "Pre-seed debconf prompts" msgstr "" #: ./doc/install-guide/section_debconf-preseeding.xml7(para) msgid "" "You can pre-seed all debconf " "prompts. To pre-seed means to store responses in the " "debconf database so that debconf does " "not prompt the user for responses. Pre-seeding enables a hands-free " "installation for users. The package maintainer creates scripts that " "automatically configure the services." msgstr "" #: ./doc/install-guide/section_debconf-preseeding.xml14(para) msgid "" "The following example shows how to pre-seed an automated MySQL Server " "installation:" msgstr "" #: ./doc/install-guide/section_debconf-preseeding.xml16(replaceable) #: ./doc/install-guide/section_debconf-preseeding.xml17(replaceable) #: ./doc/install-guide/section_debconf-preseeding.xml19(replaceable) msgid "MYSQL_PASSWORD" msgstr "" #: ./doc/install-guide/section_debconf-preseeding.xml23(para) msgid "" "The seen true option tells debconf that a " "specified screen was already seen by the user so do not show it again. This " "option is useful for upgrades." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-single-flat.xml22(None) msgid "" "@@image: '../common/figures/demo_flat_install.png'; " "md5=27b45d5871859ff4951c92df7c8763d8" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-single-flat.xml621(None) msgid "" "@@image: '../common/figures/UseCase-SingleFlat.png'; " "md5=bdd61f2967fb1a55e4f50d766db7b113" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-single-flat.xml637(None) msgid "" "@@image: '../common/figures/UseCase-MultiFlat.png'; " "md5=289e38a7a13a2a4413e5a1e62ce55b3e" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-single-flat.xml659(None) msgid "" "@@image: '../common/figures/UseCase-MixedFlatPrivate.png'; " "md5=8da4ceb5a1e5a2357394478645af7449" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml6(title) msgid "Single flat network" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml7(para) msgid "" "This section describes how to install the OpenStack Networking service and " "its components for a single flat network use case." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml10(para) msgid "" "The following diagram shows the set up. For simplicity, all nodes should " "have one interface for management traffic and one or more interfaces for " "traffic to and from VMs. The management network is 100.1.1.0/24 with " "controller node at 100.1.1.2. The example uses the Open vSwitch plugin and " "agent." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml16(para) msgid "" "You can modify this set up to make use of another supported plug-in and its " "agent." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml25(para) msgid "The following table describes some nodes in the set up:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml39(para) msgid "" "Runs the Networking service, Identity Service, and Compute services that are" " required to deploy VMs (nova-" "api, nova-scheduler," " for example). The node must have at least one network interface, which is " "connected to the Management Network. The host name is " "controller, which every other node resolves to the IP of " "the controller node." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml52(para) msgid "" "The nova-network service should " "not be running. This is replaced by the OpenStack Networking component, " "neutron. To delete a network, run" " this command:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml64(para) msgid "" "Note that a network must first be disassociated from a project using the " "nova network-disassociate command before it can be deleted." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml71(td) msgid "" "Runs the Networking L2 agent and the Compute services that run VMs " "( specifically, and optionally other nova-* services " "depending on configuration). The node must have at least two network " "interfaces. The first communicates with the controller node through the " "management network. The second interface handles the VM traffic on the data " "network. The VM can receive its IP address from the DHCP agent on this " "network." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml85(td) msgid "" "Runs Networking L2 agent and the DHCP agent. The DHCP agent allocates IP " "addresses to the VMs on the network. The node must have at least two network" " interfaces. The first communicates with the controller node through the " "management network. The second interface handles the VM traffic on the data " "network." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml101(para) msgid "The demo assumes the following prerequisites:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml109(para) msgid "" "Glance is installed, configured, and running. Additionally, an image must be" " available." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml113(para) msgid "" "OpenStack Identity is installed, configured, and running. A Networking user " "neutron is in place on tenant service with password " "NEUTRON_PASS." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml121(para) msgid "Additional services:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml124(para) msgid "" "RabbitMQ is running with the default guest user and password " "RABBIT_PASS." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml129(para) msgid "Qpid is running with the default guest user and password." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml142(para) msgid "Compute is installed and configured." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml155(para) msgid "" "Install the Networking server and respond to debconf prompts to configure the database, " "the keystone_authtoken, and the RabbitMQ credentials." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml162(para) msgid "" "See for " "installation instructions." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml171(para) msgid "" "See for database creation " "details." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml177(para) msgid "" "If not already configured, update the Networking " "/etc/neutron/neutron.conf configuration file to use the Identity " "Service, the plug-in, and database configuration:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml191(para) #: ./doc/install-guide/section_neutron-install.xml334(para) #: ./doc/install-guide/section_neutron-install.xml900(para) #: ./doc/install-guide/section_neutron-install.xml1208(para) msgid "Configure Networking to connect to the database:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml194(para) #: ./doc/install-guide/section_neutron-single-flat.xml347(para) msgid "Configure Networking to use your chosen plug-in:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml199(para) #: ./doc/install-guide/section_neutron-single-flat.xml352(para) #: ./doc/install-guide/section_neutron-single-flat.xml436(para) #: ./doc/install-guide/section_neutron-install.xml301(para) #: ./doc/install-guide/section_neutron-install.xml853(para) #: ./doc/install-guide/section_neutron-install.xml1304(para) msgid "Configure access to the RabbitMQ service:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml208(para) #: ./doc/install-guide/section_neutron-single-flat.xml361(para) #: ./doc/install-guide/section_neutron-single-flat.xml445(para) #: ./doc/install-guide/section_neutron-install.xml321(para) #: ./doc/install-guide/section_neutron-install.xml864(para) #: ./doc/install-guide/section_neutron-install.xml1315(para) msgid "Configure access to the Qpid message queue:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml216(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml218(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml369(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml371(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml453(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml455(replaceable) #: ./doc/install-guide/section_neutron-install.xml329(replaceable) #: ./doc/install-guide/section_neutron-install.xml331(replaceable) #: ./doc/install-guide/section_neutron-install.xml872(replaceable) #: ./doc/install-guide/section_neutron-install.xml874(replaceable) #: ./doc/install-guide/section_neutron-install.xml1323(replaceable) #: ./doc/install-guide/section_neutron-install.xml1325(replaceable) msgid "guest" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml221(para) msgid "" "If not already configured, update the Networking " "/etc/neutron/neutron.conf configuration file to choose a plug-in " "and Identity Service user as necessary:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml243(para) msgid "" "Update the plug-in " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini " "configuration file with the bridge mappings:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml258(para) msgid "Restart the Networking service:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml265(emphasis) msgid "Compute node - Compute" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml267(para) msgid "" "Install the nova-compute service." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml271(para) msgid "See for installation instructions." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml276(para) msgid "" "Update the Compute /etc/nova/nova.conf configuration " "file to make use of OpenStack Networking:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml304(para) msgid "Restart the Compute services" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml311(emphasis) msgid "Compute and Network node - L2 agent" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml314(para) msgid "" "Install and start Open vSwitch. Then, configure neutron accordingly." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml316(para) msgid "" "See for detailed " "instructions." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml321(para) msgid "Add the integration bridge to Open vSwitch:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml326(para) #: ./doc/install-guide/section_neutron-single-flat.xml418(para) msgid "" "Update the Networking /etc/neutron/neutron.conf " "configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml341(para) msgid "" "If not already configured, update the Networking " "/etc/neutron/neutron.conf configuration file to use the plug-in, " "message queue, and database configuration:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml374(para) msgid "" "Update the plug-in " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini " "configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml388(para) msgid "" "Create a symbolic link from /etc/neutron/plugin.ini to " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " or neutron-server will not run:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml393(para) msgid "" "Create the br-eth0 network bridge to " "handle communication between nodes using eth0:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml401(para) msgid "Restart the OpenStack Networking L2 agent:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml409(emphasis) msgid "Network node - DHCP agent" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml413(para) msgid "" "See for generic installation instructions." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml429(para) msgid "" "If not already configured, update the Networking " "/etc/neutron/neutron.conf configuration file to use the plug-in " "and message queue." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml458(para) msgid "" "Ensure that the DHCP agent is using the correct plug-in my changing the " "configuration in /etc/neutron/dhcp_agent.ini:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml466(para) msgid "Restart the DHCP agent:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml476(para) msgid "Use the following commands on the network node." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml502(para) msgid "Get the user information:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml515(para) msgid "" "Create a internal shared network on the demo tenant ($TENANT_ID is " "b7445f221cda4f4a8ac7db6b218b1339):" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml538(para) msgid "Create a subnet on the network:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml558(para) msgid "Create a server for tenant A:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml571(para) msgid "Ping the server of tenant A:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml577(para) msgid "Ping the public network within the server of tenant A:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml589(para) msgid "" "The 192.168.1.1 is an IP on public network to which the router connects." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml594(para) msgid "" "Create servers for other tenants with similar commands. Because all VMs " "share the same subnet, they can access each other." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml601(title) msgid "Use case: single flat network" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml602(para) msgid "" "The simplest use case is a single network. This is a \"shared\" network, " "meaning it is visible to all tenants via the Networking API. Tenant VMs have" " a single NIC, and receive a fixed IP address from the subnet(s) associated " "with that network. This use case essentially maps to the FlatManager and " "FlatDHCPManager models provided by Compute. Floating IPs are not supported." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml609(para) msgid "" "This network type is often created by the OpenStack administrator to map " "directly to an existing physical network in the data center (called a " "\"provider network\"). This allows the provider to use a physical router on " "that data center network as the gateway for VMs to reach the outside world. " "For each subnet on an external network, the gateway configuration on the " "physical router must be manually configured outside of OpenStack." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml628(title) msgid "Use case: multiple flat network" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml629(para) msgid "" "This use case is similar to the above single flat network use case, except " "that tenants can see multiple shared networks via the Networking API and can" " choose which network (or networks) to plug into." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml643(title) msgid "Use case: mixed flat and private network" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml644(para) msgid "" "This use case is an extension of the above Flat Network use cases. In " "addition to being able to see one or more shared networks via the OpenStack " "Networking API, tenants can also have access to private per-tenant networks " "(only visible to tenant users)." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml649(para) msgid "" "Created VMs can have NICs on any of the shared or private networks that the " "tenant owns. This enables the creation of multi-tier topologies that use VMs" " with multiple NICs. It also enables a VM to act as a gateway so that it can" " provide services such as routing, NAT, and load balancing." msgstr "" #: ./doc/install-guide/ch_neutron.xml6(title) msgid "Install the Networking service" msgstr "" #: ./doc/install-guide/ch_neutron.xml9(para) msgid "" "This chapter is a bit more adventurous than we would like. We are working on" " cleanup and improvements to it. Like for the rest of the Installation " "Guide, feedback through bug reports and patches to improve it are welcome." msgstr "" #: ./doc/install-guide/ch_neutron.xml16(title) msgid "Networking considerations" msgstr "" #: ./doc/install-guide/ch_neutron.xml17(para) msgid "" "OpenStack Networking drivers range from software bridges to full control of " "certain switching hardware. This guide focuses on the Open vSwitch driver. " "However, the theories presented here are mostly applicable to other " "mechanisms, and the Networking chapter of the OpenStack " "Configuration Reference offers additional information." msgstr "" #: ./doc/install-guide/ch_neutron.xml26(para) msgid "To prepare for installation, see ." msgstr "" #: ./doc/install-guide/ch_neutron.xml29(para) msgid "" "If you previously set up networking for your compute node by using " "nova-network, this configuration " "overrides those settings." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/ch_basics.xml121(None) msgid "" "@@image: 'figures/basic-architecture-networking.svg'; " "md5=1a9454b8cdb45af98a43fbff5dd58fe9" msgstr "" #: ./doc/install-guide/ch_basics.xml6(title) msgid "Basic operating system configuration" msgstr "" #: ./doc/install-guide/ch_basics.xml8(para) msgid "" "This guide shows you how to create a controller node to host most services " "and a compute node to run virtual machine instances. Subsequent chapters " "create additional nodes to run more services. OpenStack is flexible about " "how and where you run each service, so other configurations are possible. " "However, you must configure certain operating system settings on each node." msgstr "" #: ./doc/install-guide/ch_basics.xml14(para) msgid "" "This chapter details a sample configuration for the controller node and any " "additional nodes. You can configure the operating system in other ways, but " "this guide assumes that your configuration is compatible with the one " "described here." msgstr "" #: ./doc/install-guide/ch_basics.xml18(para) msgid "" "All example commands assume you have administrative privileges. Either run " "the commands as the root user or prefix them with the " "command." msgstr "" #: ./doc/install-guide/ch_basics.xml24(title) #: ./doc/install-guide/object-storage/section_object-storage-install.xml23(title) msgid "Before you begin" msgstr "" #: ./doc/install-guide/ch_basics.xml26(para) msgid "" "We strongly recommend that you install a 64-bit operating system on your " "compute nodes. If you use a 32-bit operating system, attempting a start a " "virtual machine using a 64-bit image will fail with an error." msgstr "" #: ./doc/install-guide/ch_basics.xml31(para) msgid "" "For more information about system requirements, see the OpenStack Operations Guide." msgstr "" #: ./doc/install-guide/ch_basics.xml38(title) msgid "Networking" msgstr "Réseaux" #: ./doc/install-guide/ch_basics.xml40(para) msgid "" "For an OpenStack production deployment, most nodes must have these network " "interface cards:" msgstr "" #: ./doc/install-guide/ch_basics.xml44(para) msgid "One network interface card for external network traffic" msgstr "" #: ./doc/install-guide/ch_basics.xml48(para) msgid "Another card to communicate with other OpenStack nodes." msgstr "" #: ./doc/install-guide/ch_basics.xml52(para) msgid "" "For simple test cases, you can use machines with a single network interface " "card." msgstr "" #: ./doc/install-guide/ch_basics.xml54(para) msgid "" "The following example configures Networking on two networks with static IP " "addresses and manually manages a list of host names on each machine. If you " "manage a large network, you might already have systems in place to manage " "this. If so, you can skip this section but note that the rest of this guide " "assumes that each node can reach the other nodes on the internal network by " "using the controller and compute1 host" " names." msgstr "" #. these fedora only paragraphs are confirmed not needed in centos #: ./doc/install-guide/ch_basics.xml63(para) msgid "" "Disable the NetworkManager " "service and enable the network " "service. The network service is " "more suitable for the static network configuration done in this guide." msgstr "" #: ./doc/install-guide/ch_basics.xml75(para) msgid "" "Since Fedora 19, firewalld replaces " "iptables as the default firewall system." msgstr "" #: ./doc/install-guide/ch_basics.xml78(para) msgid "" "You can use firewalld successfully, but this guide " "recommends and demonstrates the use of the default " "iptables." msgstr "" #: ./doc/install-guide/ch_basics.xml81(para) msgid "" "For Fedora 19 systems, run the following commands to disable " "firewalld and enable iptables:" msgstr "" #: ./doc/install-guide/ch_basics.xml89(para) msgid "" "RHEL and derivatives including CentOS and Scientific Linux enable a " "restrictive firewall by default. During this installation, certain steps " "will fail unless you alter this setting or disable the firewall. For further" " information about securing your installation, refer to the OpenStack Security Guide." msgstr "" #: ./doc/install-guide/ch_basics.xml96(para) msgid "" "When you set up your system, use the traditional network scripts and do not " "use NetworkManager. You can " "change the settings after installation with the YaST network module:" msgstr "" #: ./doc/install-guide/ch_basics.xml102(para) msgid "" "Configure both eth0 and eth1. The " "examples in this guide use the " "192.168.0.x IP addresses for " "the internal network and the " "10.0.0.x IP addresses for the " "external network. Make sure to connect your network devices to the correct " "network." msgstr "" #: ./doc/install-guide/ch_basics.xml109(para) msgid "" "In this guide, the controller node uses the 192.168.0.10 " "and 10.0.0.10 IP addresses. When you create the compute " "node, use the 192.168.0.11 and " "10.0.0.11 addresses instead. Additional nodes that you " "add in subsequent chapters also follow this pattern." msgstr "" #: ./doc/install-guide/ch_basics.xml117(title) msgid "Basic architecture" msgstr "" #: ./doc/install-guide/ch_basics.xml126(filename) msgid "/etc/sysconfig/network-scripts/ifcfg-eth0" msgstr "" #: ./doc/install-guide/ch_basics.xml137(filename) msgid "/etc/sysconfig/network-scripts/ifcfg-eth1" msgstr "" #: ./doc/install-guide/ch_basics.xml147(para) msgid "" "To configure the network interfaces, start the YaST network module, as " "follows:" msgstr "" #: ./doc/install-guide/ch_basics.xml152(para) msgid "" "Use these parameters to set up the eth0 ethernet card for" " the internal network:" msgstr "" #: ./doc/install-guide/ch_basics.xml160(para) msgid "" "Use these parameters to set up the eth1 ethernet card for" " the external network:" msgstr "" #: ./doc/install-guide/ch_basics.xml168(para) msgid "Set up a default route on the external network." msgstr "" #: ./doc/install-guide/ch_basics.xml173(filename) msgid "/etc/network/interfaces" msgstr "" #: ./doc/install-guide/ch_basics.xml187(para) msgid "" "After you configure the network, restart the daemon for changes to take " "effect:" msgstr "" #: ./doc/install-guide/ch_basics.xml193(para) msgid "" "Set the host name of each machine. Name the controller node " "controller and the first compute node " "compute1. The examples in this guide use these host " "names." msgstr "" #: ./doc/install-guide/ch_basics.xml197(para) msgid "" "Use the command to set the host name: " msgstr "" #: ./doc/install-guide/ch_basics.xml200(para) msgid "Use to set the host name with YaST." msgstr "" #: ./doc/install-guide/ch_basics.xml202(para) msgid "" "To have the host name change persist when the system reboots, you must " "specify it in the proper configuration file. In Red Hat Enterprise Linux, " "CentOS, and older versions of Fedora, you set this in the file " "/etc/sysconfig/network. Change the line starting with " "HOSTNAME=." msgstr "" #: ./doc/install-guide/ch_basics.xml209(para) msgid "" "As of Fedora 18, Fedora uses the /etc/hostname file, " "which contains a single line with the host name." msgstr "" #: ./doc/install-guide/ch_basics.xml212(para) msgid "" "To configure this host name to be available when the system reboots, you " "must specify it in the /etc/hostname file, which " "contains a single line with the host name." msgstr "" #: ./doc/install-guide/ch_basics.xml216(para) msgid "" "Finally, ensure that each node can reach the other nodes by using host " "names. You must manually edit the /etc/hosts file on " "each system. For large-scale deployments, use DNS or a configuration " "management system like Puppet." msgstr "" #: ./doc/install-guide/ch_basics.xml226(title) msgid "Network Time Protocol (NTP)" msgstr "" #: ./doc/install-guide/ch_basics.xml227(para) msgid "" "To synchronize services across multiple machines, you must install NTP. The " "examples in this guide configure the controller node as the reference server" " and any additional nodes to set their time from the controller node." msgstr "" #: ./doc/install-guide/ch_basics.xml231(para) msgid "" "Install the ntp package on each system running OpenStack " "services." msgstr "" #: ./doc/install-guide/ch_basics.xml236(para) msgid "" "Set up the NTP server on your controller node so that it receives data by " "modifying the ntp.conf file and restarting the service." msgstr "" #: ./doc/install-guide/ch_basics.xml244(para) msgid "" "On additional nodes, it is advised that you configure the other nodes to " "synchronize their time from the controller node rather than from outside of " "your LAN. To do so, install the ntp daemon as above, then edit " "/etc/ntp.conf and change the server " "directive to use the controller node as internet time source." msgstr "" #: ./doc/install-guide/ch_basics.xml253(title) msgid "Passwords" msgstr "" #: ./doc/install-guide/ch_basics.xml255(para) msgid "" "The various OpenStack services and the required software like the database " "and the Messaging server have to be password protected. These passwords are " "needed when configuring a service and then again to access the service. You " "have to choose a random password while configuring the service and later " "remember to use the same password when accessing it. To generate a list of " "passwords, you can use the pwgen program to " "generate a list of passwords or take the output of: " msgstr "" #: ./doc/install-guide/ch_basics.xml266(para) msgid "" "This guide uses the convention that " "SERVICE_PASS is password to " "access the service SERVICE and " "SERVICE_DBPASS is the database" " password used by the service SERVICE to access the database." msgstr "" #: ./doc/install-guide/ch_basics.xml274(para) msgid "" "The complete list of passwords you need to define in this guide are:
Passwords
Password " "nameDescription
Database password " "(no variable used)Root password for the database
RABBIT_PASSPassword" " of user guest of " "RabbitMQ
KEYSTONE_DBPASSDatabase" " password of Identity " "service
ADMIN_PASSPassword" " of user " "admin
GLANCE_DBPASSDatabase" " password for Image " "Service
GLANCE_PASSPassword" " of Image Service user " "glance
NOVA_DBPASSDatabase" " password for Compute " "service
NOVA_PASSPassword" " of Compute service user " "nova
DASH_DBPASSDatabase" " password for the " "dashboard
CINDER_DBPASSDatabase" " password for the Block Storage " "Service
CINDER_PASSPassword" " of Block Storage Service user " "cinder
NEUTRON_DBPASSDatabase" " password for the Networking " "service
NEUTRON_PASSPassword" " of Networking service user " "neutron
HEAT_DBPASSDatabase" " password for the Orchestration " "service
HEAT_PASSPassword" " of Orchestration service user " "heat
CEILOMETER_DBPASSDatabase" " password for the Telemetry " "service
CEILOMETER_PASSPassword" " of Telemetry service user " "ceilometer
" msgstr "" #: ./doc/install-guide/ch_basics.xml358(title) msgid "MySQL database" msgstr "" #: ./doc/install-guide/ch_basics.xml359(para) msgid "" "Most OpenStack services require a database to store information. These " "examples use a MySQL database that runs on the controller node. You must " "install the MySQL database on the controller node. You must install MySQL " "client software on any additional nodes that access MySQL." msgstr "" #: ./doc/install-guide/ch_basics.xml365(para) msgid "" "Most OpenStack services require a database to store information. This guide " "uses a MySQL database on SUSE Linux Enterprise Server and a compatible " "database on openSUSE running on the controller node. This compatible " "database for openSUSE is MariaDB. You must install the MariaDB database on " "the controller node. You must install the MariaDB client software on any " "nodes that access the MariaDB database." msgstr "" #: ./doc/install-guide/ch_basics.xml375(title) msgid "Controller setup" msgstr "" #: ./doc/install-guide/ch_basics.xml376(para) msgid "" "For SUSE Linux Enterprise Server: On the " "controller node, install the MySQL client and server packages, and the " "Python library." msgstr "" #: ./doc/install-guide/ch_basics.xml380(para) msgid "" "For openSUSE: On the controller node, install the MariaDB client and " "database server packages, and the MySQL Python library." msgstr "" #: ./doc/install-guide/ch_basics.xml387(para) msgid "" "When you install the server package, you are prompted for the root password " "for the database. Choose a strong password and remember it." msgstr "" #: ./doc/install-guide/ch_basics.xml391(para) msgid "" "Edit /etc/mysql/my.cnf/etc/my.cnf and set the " "bind-address to the internal IP address of the " "controller, to enable access from outside the controller node." msgstr "" #: ./doc/install-guide/ch_basics.xml401(para) msgid "Restart the MySQL service to apply the changes:" msgstr "" #: ./doc/install-guide/ch_basics.xml404(para) msgid "" "Start the MySQLMariaDB or MySQL database server and set it to" " start automatically when the system boots." msgstr "" #: ./doc/install-guide/ch_basics.xml413(para) msgid "" "Finally, you should set a root password for your MySQLMariaDB" " or MySQL database. The OpenStack programs that set up databases " "and tables prompt you for this password if it is set." msgstr "" #: ./doc/install-guide/ch_basics.xml419(para) msgid "" "You must delete the anonymous users that are created when the database is " "first started. Otherwise, database connection problems occur when you follow" " the instructions in this guide. To do this, use the " "command. Note that if fails you might need to use " " first:" msgstr "" #: ./doc/install-guide/ch_basics.xml428(para) msgid "" "If you have not already set " "a root database password, press ENTER when you are prompted" " for the password. This command presents a number of options for " "you to secure your database installation. Respond to all " "prompts unless you have a good reason to do otherwise." msgstr "" #: ./doc/install-guide/ch_basics.xml438(title) msgid "Node setup" msgstr "" #: ./doc/install-guide/ch_basics.xml439(para) msgid "" "On all nodes other than the controller node, install the MySQLMariaDB (on openSUSE) client and the MySQL Python " "library on any system that does not host a MySQL database:" msgstr "" #: ./doc/install-guide/ch_basics.xml448(para) msgid "For SUSE Linux Enterprise, install MySQL:" msgstr "" #: ./doc/install-guide/ch_basics.xml455(title) msgid "OpenStack packages" msgstr "" #: ./doc/install-guide/ch_basics.xml456(para) msgid "" "Distributions might release OpenStack packages as part of their distribution" " or through other methods because the OpenStack and distribution release " "times are independent of each other." msgstr "" #: ./doc/install-guide/ch_basics.xml460(para) msgid "" "This section describes the configuration you must complete after you " "configure machines to install the latest OpenStack packages." msgstr "" #: ./doc/install-guide/ch_basics.xml463(para) msgid "" "The examples in this guide use the OpenStack packages from the RDO " "repository. These packages work on Red Hat Enterprise Linux 6, compatible " "versions of CentOS, and Fedora 19. To enable the RDO repository, download " "and install the rdo-release-havana package." msgstr "" #: ./doc/install-guide/ch_basics.xml470(para) msgid "" "The EPEL package includes GPG keys for package signing and repository " "information. This should only be installed on Red Hat Enterprise Linux and " "CentOS, not Fedora. Install the latest epel-release " "package (see http://download.fedoraproject.org/pub/epel/6/x86_64/repoview" "/epel-release.html). For example:" msgstr "" #: ./doc/install-guide/ch_basics.xml479(para) msgid "" "The openstack-utils package contains utility programs " "that make installation and configuration easier. These programs are used " "throughout this guide. Install openstack-utils. This " "verifies that you can access the RDO repository." msgstr "" #: ./doc/install-guide/ch_basics.xml486(para) msgid "" "The openstack-selinux package includes the policy files " "that are required to configure SELinux during OpenStack installation. " "Install openstack-selinux." msgstr "" #: ./doc/install-guide/ch_basics.xml490(para) #: ./doc/install-guide/ch_basics.xml510(para) msgid "Upgrade your system and reboot for all changes to take effect:" msgstr "" #: ./doc/install-guide/ch_basics.xml494(para) msgid "" "Use the Open Build Service repositories for Havana based on your openSUSE or" " SUSE Linux Enterprise Server version, for example if you run openSUSE 12.3 " "use:" msgstr "" #: ./doc/install-guide/ch_basics.xml498(para) msgid "If you use SUSE Linux Enterprise Server 11 SP3, use:" msgstr "" #: ./doc/install-guide/ch_basics.xml501(para) msgid "" "For openSUSE 13.1, nothing needs to be done because OpenStack Havana " "packages are part of the distribution itself." msgstr "" #: ./doc/install-guide/ch_basics.xml504(para) msgid "" "The openstack-utils package contains utility programs " "that make installation and configuration easier. These programs are used " "throughout this guide. Install openstack-utils. This " "verifies that you can access the Open Build Service repository:" msgstr "" #: ./doc/install-guide/ch_basics.xml516(title) msgid "To use the Ubuntu Cloud Archive for Havana" msgstr "" #: ./doc/install-guide/ch_basics.xml517(para) msgid "" "The Ubuntu " "Cloud Archive is a special repository that allows you to install " "newer releases of OpenStack on the stable supported version of Ubuntu." msgstr "" #: ./doc/install-guide/ch_basics.xml523(para) msgid "Install the Ubuntu Cloud Archive for Havana: " msgstr "" #: ./doc/install-guide/ch_basics.xml528(para) msgid "" "Update the package database, upgrade your system, and reboot for all changes" " to take effect: " msgstr "" #: ./doc/install-guide/ch_basics.xml535(title) msgid "To use the Debian Wheezy backports archive for Havana" msgstr "" #: ./doc/install-guide/ch_basics.xml537(para) msgid "" "The Havana release is available only in Debian Sid (otherwise called " "Unstable). However, the Debian maintainers of OpenStack also maintain a non-" "official Debian repository for OpenStack containing Wheezy backports." msgstr "" #: ./doc/install-guide/ch_basics.xml542(para) msgid "Install the Debian Wheezy backport repository Havana:" msgstr "" #: ./doc/install-guide/ch_basics.xml547(para) msgid "Install the Debian Wheezy OpenStack repository for Havana:" msgstr "" #: ./doc/install-guide/ch_basics.xml552(para) msgid "Update the repository database and install the key:" msgstr "" #: ./doc/install-guide/ch_basics.xml556(para) msgid "" "Update the package database, upgrade your system, and reboot for all changes" " to take effect:" msgstr "" #: ./doc/install-guide/ch_basics.xml562(para) msgid "" "Numerous archive.gplhost.com mirrors are available around the world. All are" " available with both FTP and HTTP protocols (you should use the closest " "mirror). The list of mirrors is available at http://archive.gplhost.com/readme.mirrors." msgstr "" #: ./doc/install-guide/ch_basics.xml570(title) msgid "Manually install python-argparse" msgstr "" #: ./doc/install-guide/ch_basics.xml571(para) msgid "" "The Debian OpenStack packages are maintained on Debian Sid (also known as " "Debian Unstable) - the current development version. Backported packages run " "correctly on Debian Wheezy with one caveat:" msgstr "" #: ./doc/install-guide/ch_basics.xml575(para) msgid "" "All OpenStack packages are written in Python. Wheezy uses Python 2.6 and " "2.7, with Python 2.6 as the default interpreter; Sid has only Python 2.7. " "There is one packaging change between these two. In Python 2.6, you " "installed the python-argparse package separately. In " "Python 2.7, this package is installed by default. Unfortunately, in Python " "2.7, this package does not include Provides: python-argparse " "directive." msgstr "" #: ./doc/install-guide/ch_basics.xml583(para) msgid "" "Because the packages are maintained in Sid where the Provides: python-" "argparse directive causes an error, and the Debian OpenStack " "maintainer wants to maintain one version of the OpenStack packages, you must" " manually install the python-argparse on each OpenStack " "system that runs Debian Wheezy before you install the other OpenStack " "packages. Use the following command to install the package:" msgstr "" #: ./doc/install-guide/ch_basics.xml592(para) msgid "This caveat applies to most OpenStack packages in Wheezy." msgstr "" #: ./doc/install-guide/ch_basics.xml596(title) msgid "Messaging server" msgstr "" #: ./doc/install-guide/ch_basics.xml597(para) msgid "" "On the controller node, install the messaging queue server. Typically this " "is RabbitMQQpid but QpidRabbitMQ and ZeroMQ (0MQ) are also " "available." msgstr "" #: ./doc/install-guide/ch_basics.xml607(title) msgid "Important security consideration" msgstr "" #: ./doc/install-guide/ch_basics.xml608(para) msgid "" "The rabbitmq-server package configures the RabbitMQ " "service to start automatically and creates a guest user " "with a default guest password. The RabbitMQ examples in " "this guide use the guest account, though it is strongly " "advised to change its default password, especially if you have IPv6 " "available: by default the RabbitMQ server enables anyone to connect to it by" " using guest as login and password, and with IPv6, it is reachable from the " "outside." msgstr "" #: ./doc/install-guide/ch_basics.xml618(para) msgid "To change the default guest password of RabbitMQ:" msgstr "" #: ./doc/install-guide/ch_basics.xml621(para) msgid "" "Disable Qpid authentication by editing /etc/qpidd.conf " "file and changing the auth option to " "no." msgstr "" #: ./doc/install-guide/ch_basics.xml627(para) msgid "" "To simplify configuration, the Qpid examples in this guide do not use " "authentication. However, we strongly advise enabling authentication for " "production deployments. For more information on securing Qpid refer to the " "Qpid " "Documentation." msgstr "" #: ./doc/install-guide/ch_basics.xml636(para) msgid "" "After enabling Qpid authenticaton, you must update the configuration file of" " each OpenStack service to ensure that the qpid_username " "and qpid_password configuration keys refer to a valid " "Qpid username and password, respectively." msgstr "" #: ./doc/install-guide/ch_basics.xml644(para) msgid "Start Qpid and set it to start automatically when the system boots." msgstr "" #: ./doc/install-guide/ch_basics.xml648(para) msgid "" "Start the messaging service and set it to start automatically when the " "system boots:" msgstr "" #: ./doc/install-guide/ch_basics.xml652(para) msgid "Congratulations, now you are ready to install OpenStack services!" msgstr "" #: ./doc/install-guide/section_cinder-node.xml6(title) msgid "Configure a Block Storage Service node" msgstr "" #: ./doc/install-guide/section_cinder-node.xml7(para) msgid "" "After you configure the services on the controller node, configure a second " "system to be a Block Storage Service node. This node contains the disk that " "serves volumes." msgstr "" #: ./doc/install-guide/section_cinder-node.xml10(para) #: ./doc/install-guide/section_cinder-controller.xml15(para) msgid "" "You can configure OpenStack to use various storage systems. The examples in " "this guide show you how to configure LVM." msgstr "" #: ./doc/install-guide/section_cinder-node.xml14(para) msgid "" "Use the instructions in to configure the " "system. Note the following differences from the installation instructions " "for the controller node:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml19(para) msgid "" "Set the host name to block1. Ensure that the IP addresses" " and host names for both nodes are listed in the " "/etc/hosts file on each system." msgstr "" #: ./doc/install-guide/section_cinder-node.xml25(para) msgid "" "Follow the instructions in to synchronize " "from the controller node." msgstr "" #: ./doc/install-guide/section_cinder-node.xml31(para) msgid "" "Install the required LVM packages, if they are not already installed: " "" msgstr "" #: ./doc/install-guide/section_cinder-node.xml37(para) msgid "" "Create the LVM physical and logical volumes. This guide assumes a second " "disk /dev/sdb that is used for this purpose:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml45(para) msgid "" "Add a filter entry to the devices section " "/etc/lvm/lvm.conf to keep LVM from scanning devices " "used by virtual machines:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml49(para) msgid "" "You must add required physical volumes for LVM on the Block Storage host. " "Run the command to get a list or required volumes." msgstr "" #: ./doc/install-guide/section_cinder-node.xml53(para) msgid "" "Each item in the filter array starts with either an a for" " accept, or an r for reject. The physical volumes that " "are required on the Block Storage host have names that begin with " "a. The array must end with \"r/.*/\" " "to reject any device not listed." msgstr "" #: ./doc/install-guide/section_cinder-node.xml59(para) msgid "" "In this example, /dev/sda1 is the volume where the " "volumes for the operating system for the node reside, while " "/dev/sdb is the volume reserved for cinder-" "volumes." msgstr "" #: ./doc/install-guide/section_cinder-node.xml70(para) msgid "" "After you configure the operating system, install the appropriate packages " "for the Block Storage Service:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml77(para) msgid "" "Respond to the debconf prompts " "about the database " "management, [keystone_authtoken] " "settings, and RabbitMQ " "credentials. Make sure to enter the same details as your Block " "Storage Service controller node." msgstr "" #: ./doc/install-guide/section_cinder-node.xml85(para) msgid "" "Another screen prompts you for the volume-" "group to use. The Debian package configuration script detects " "every active volume group, provided that the lvm2 package is installed before Block " "Storage (this should be the case if you configured the volume group first, " "as this guide recommends), and tries to use the first one it sees. If you " "have only one active volume group on your Block Storage Service node, you do" " not need to manually enter its name in when you install the cinder-volume package because it is detected " "automatically. If no volume-group" " is available when you install cinder-" "common, you must manually configure or re-configure cinder-common by using ." msgstr "" #: ./doc/install-guide/section_cinder-node.xml104(para) msgid "" "Copy the /etc/cinder/api-paste.ini file from the " "controller, or open the file in a text editor and locate the section " "[filter:authtoken]. Make sure the following options are " "set:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml115(replaceable) #: ./doc/install-guide/section_cinder-controller.xml78(replaceable) #: ./doc/install-guide/section_cinder-controller.xml94(replaceable) msgid "CINDER_PASS" msgstr "" #: ./doc/install-guide/section_cinder-node.xml118(para) #: ./doc/install-guide/section_cinder-controller.xml98(para) msgid "" "Configure Block Storage to use the RabbitMQ message broker by setting these " "configuration keys in the [DEFAULT] configuration group " "of the /etc/cinder/cinder.conf file. Replace " "RABBIT_PASS with the password you chose for " "RabbitMQ." msgstr "" #: ./doc/install-guide/section_cinder-node.xml133(para) #: ./doc/install-guide/section_cinder-controller.xml113(para) msgid "Configure Block Storage to use the Qpid message broker." msgstr "" #: ./doc/install-guide/section_cinder-node.xml140(para) #: ./doc/install-guide/section_cinder-controller.xml120(para) msgid "" "Configure Block Storage to use the RabbitMQ message broker. Replace " "RABBIT_PASS with the password you chose for " "RabbitMQ." msgstr "" #: ./doc/install-guide/section_cinder-node.xml153(para) msgid "" "Configure Block Storage to use your MySQL database. Edit the " "/etc/cinder/cinder.conf file and add the following key " "under the [database] section. Replace " "CINDER_DBPASS with the password you chose for the" " Block Storage database." msgstr "" #: ./doc/install-guide/section_cinder-node.xml158(para) #: ./doc/install-guide/section_cinder-controller.xml41(para) msgid "" "The /etc/cinder/cinder.conf file packaged with some " "distributions does not include the [database] section " "header. You must add this section header to the end of the file before " "proceeding further." msgstr "" #: ./doc/install-guide/section_cinder-node.xml164(replaceable) #: ./doc/install-guide/section_cinder-node.xml167(replaceable) #: ./doc/install-guide/section_cinder-controller.xml47(replaceable) #: ./doc/install-guide/section_cinder-controller.xml50(replaceable) #: ./doc/install-guide/section_cinder-controller.xml56(replaceable) #: ./doc/install-guide/section_cinder-controller.xml64(replaceable) #: ./doc/install-guide/section_cinder-controller.xml66(replaceable) msgid "CINDER_DBPASS" msgstr "" #: ./doc/install-guide/section_cinder-node.xml173(para) #: ./doc/install-guide/section_cinder-controller.xml162(para) msgid "Restart the cinder service with its new settings:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml180(para) msgid "" "Configure the ISCI target service to discover cinder volumes. Add the " "following line to the beginning of the " "/etc/tgt/targets.conf file, if it is not already " "present:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml188(para) msgid "" "Start the cinder services and configure them to start when the system boots:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml5(title) msgid "Configure a Block Storage Service controller" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml7(para) msgid "" "This section describes how to configure OpenStack Block Storage services on " "the Controller node and " "assumes that a second node provides storage through the cinder-volume service. For instructions on " "how to configure the second node, see ." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml19(para) msgid "Install the appropriate packages for the Block Storage Service:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml26(para) msgid "" "Respond to the prompts for database management, [keystone_authtoken] " "settings, RabbitMQ " "credentials and API " "endpoint registration." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml35(para) msgid "" "Configure Block Storage to use your MySQL database. Edit the " "/etc/cinder/cinder.conf file and add the following key " "under the [database] section. Replace " "CINDER_DBPASS with the password for the Block " "Storage database that you will create in a later step." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml53(para) msgid "" "To create the Block Storage Service database and tables and a " "cinder database user, run the command." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml59(para) msgid "" "Use the password that you set to log in as root to create a " "cinder database." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml69(para) msgid "Create the database tables for the Block Storage Service." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml74(para) msgid "" "Create a cinder user. The Block Storage Service uses this" " user to authenticate with the Identity Service. Use the " "service tenant and give the user the " "admin role." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml78(replaceable) msgid "cinder@example.com" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml82(para) msgid "" "Add the credentials to the file /etc/cinder/api-" "paste.ini. Open the file in a text editor and locate the section " "[filter:authtoken]. Set the following options:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml134(para) msgid "" "Register the Block Storage Service with the Identity Service so that other " "OpenStack services can locate it. Register the service and specify the " "endpoint using the command." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml140(para) #: ./doc/install-guide/section_cinder-controller.xml153(para) msgid "" "Note the id property returned and use it to create the " "endpoint." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml149(para) msgid "" "Also register a service and endpoint for version 2 of the Block Storage " "Service API." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml167(para) msgid "" "Start the cinder services and configure them to start when the system boots." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml8(title) msgid "" "OpenStack Installation Guide for Red Hat " "Enterprise Linux, CentOS, and Fedora for " "Ubuntu 12.04 (LTS) for Debian 7.0 " "(Wheezy) for openSUSE and SUSE Linux " "Enterprise Server" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml18(phrase) msgid "for Red Hat Enterprise Linux, CentOS, and Fedora" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml20(phrase) msgid "for Ubuntu 12.04 (LTS)" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml21(phrase) msgid "for openSUSE and SUSE Linux Enterprise Server" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml23(phrase) msgid "for Debian 7.0 (Wheezy)" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml17(titleabbrev) msgid "" "OpenStack Installation " "Guide" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml32(orgname) msgid "OpenStack" msgstr "OpenStack" #: ./doc/install-guide/bk_openstackinstallguide.xml36(year) msgid "2012" msgstr "2012" #: ./doc/install-guide/bk_openstackinstallguide.xml37(year) msgid "2013" msgstr "2013" #: ./doc/install-guide/bk_openstackinstallguide.xml38(holder) msgid "OpenStack Foundation" msgstr "Fondation OpenStack" #: ./doc/install-guide/bk_openstackinstallguide.xml40(releaseinfo) msgid "havana" msgstr "havana" #: ./doc/install-guide/bk_openstackinstallguide.xml41(productname) msgid "OpenStack Installation Guide" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml45(remark) msgid "Copyright details are filled in by the template." msgstr "Les détails sur les droits d'auteurs sont remplis par le modèle." #: ./doc/install-guide/bk_openstackinstallguide.xml50(para) msgid "" "The OpenStack® system consists of several key projects that you install " "separately but that work together depending on your cloud needs. These " "projects include Compute, Identity Service, Networking, Image Service, Block" " Storage Service, Object Storage, Telemetry, and Orchestration. You can " "install any of these projects separately and configure them standalone or as" " connected entities. This guide walks through an " "installation by using packages available through Debian 7.0 (code name: " "Wheezy).This guide walks through an " "installation by using packages available through Ubuntu 12.04 " "(LTS).This guide shows you how to" " install OpenStack by using packages available through Fedora 19 as well as " "on Red Hat Enterprise Linux and its derivatives through the EPEL " "repository.This guide shows you how to " "install OpenStack by using packages on openSUSE through the Open Build " "Service Cloud repository. Explanations of configuration options and" " sample configuration files are included." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml78(date) msgid "2013-10-25" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml82(para) msgid "Added initial Debian support." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml88(date) msgid "2013-10-17" msgstr "17-10-2013" #: ./doc/install-guide/bk_openstackinstallguide.xml92(para) msgid "Havana release." msgstr "Havana lancement." #: ./doc/install-guide/bk_openstackinstallguide.xml98(date) msgid "2013-10-16" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml102(para) msgid "Add support for SUSE Linux Enterprise." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml109(date) msgid "2013-10-08" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml113(para) msgid "Complete reorganization for Havana." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml120(date) msgid "2013-09-09" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml124(para) msgid "Build also for openSUSE." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml130(date) msgid "2013-08-01" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml134(para) msgid "" "Fixes to Object Storage verification steps. Fix bug 1207347." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml143(date) msgid "2013-07-25" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml147(para) msgid "" "Adds creation of cinder user and addition to the service tenant. Fix bug " "1205057." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml157(date) msgid "2013-05-08" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml161(para) msgid "Updated the book title for consistency." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml168(date) msgid "2013-05-02" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml172(para) msgid "Updated cover and fixed small errors in appendix." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml179(date) msgid "2013-04-30" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml183(para) msgid "Grizzly release." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml189(date) msgid "2013-04-18" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml193(para) msgid "Updates and clean up on the Object Storage installation." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml200(date) msgid "2013-04-08" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml204(para) msgid "" "Adds a note about availability of Grizzly packages on Ubuntu and Debian." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml212(date) msgid "2013-04-03" msgstr "2013-04-03" #: ./doc/install-guide/bk_openstackinstallguide.xml216(para) msgid "Updates RHEL/CentOS/Fedora information for Grizzly release." msgstr "Information de mises à jour de RHEL/CentOS/Fedora correspondant à la version Grizzly." #: ./doc/install-guide/bk_openstackinstallguide.xml224(date) msgid "2013-03-26" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml228(para) msgid "Updates Dashboard (Horizon) information for Grizzly release." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml236(date) msgid "2013-02-12" msgstr "2013-02-12" #: ./doc/install-guide/bk_openstackinstallguide.xml240(para) msgid "" "Adds chapter about Essex to Folsom upgrade for Compute and related services " "(excludes OpenStack Object Storage (Swift) and OpenStack Networking " "(Quantum))." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml250(date) msgid "2013-01-16" msgstr "2013-01-16" #: ./doc/install-guide/bk_openstackinstallguide.xml254(para) msgid "Fix file copy issue for figures in the /common/ directory." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml261(date) msgid "2012-11-09" msgstr "09-11-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml265(para) msgid "Folsom release of this document." msgstr "Lancement de la version de ce document pour Folsom." #: ./doc/install-guide/bk_openstackinstallguide.xml272(date) msgid "2012-10-10" msgstr "10-10-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml276(para) msgid "" "Doc bug fixes: 10544591064745" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml286(date) msgid "2012-09-26" msgstr "26-09-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml290(para) msgid "Adds an all-in-one install section." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml297(date) msgid "2012-07-23" msgstr "23-07-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml301(para) msgid "Adds additional detail about installing and configuring nova-volumes." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml306(para) msgid "" "Doc bug fixes: 9785101027230" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml317(date) msgid "2012-07-17" msgstr "17-07-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml321(para) msgid "Update build process so two uniquely-named PDF files are output." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml329(date) msgid "2012-07-13" msgstr "13-07-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml333(para) msgid "" "Doc bug fixes: 10258401025847" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml344(date) msgid "2012-06-19" msgstr "19-06-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml348(para) msgid "Fix PDF links." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml351(para) msgid "" "Doc bug fixes: 967778984959, 1002294, 1010163." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml367(date) msgid "2012-05-31" msgstr "31-05-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml371(para) msgid "Revise install guide to encompass more Linux distros." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml375(para) msgid "" "Doc bug fixes: 996988, 998116, 999005." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml387(date) msgid "2012-05-03" msgstr "03-05-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml391(para) msgid "" "Fixes problems with glance-api-paste.ini and glance-registry-paste.ini samples and instructions." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml398(para) msgid "Removes \"DRAFT\" designation." msgstr "Supprimer la désignation \"DRAFT\"." #: ./doc/install-guide/bk_openstackinstallguide.xml404(date) msgid "2012-05-02" msgstr "02-05-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml408(para) msgid "Essex release." msgstr "Lancement de la version Essex." #: ./doc/install-guide/bk_openstackinstallguide.xml414(date) msgid "2012-05-01" msgstr "01-05-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml418(para) msgid "Updates the Object Storage and Identity (Keystone) configuration." msgstr "Mets à jour la configuration de l'Object Storage et de l'Identity (Keystone)" #: ./doc/install-guide/bk_openstackinstallguide.xml426(date) msgid "2012-04-25" msgstr "25-04-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml430(para) msgid "" "Changes service_id copy/paste error for the EC2 service-create command." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml433(para) msgid "Adds verification steps for Object Storage installation." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml435(para) msgid "" "Fixes proxy-server.conf file so it points to keystone " "not tempauth." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml444(date) msgid "2012-04-23" msgstr "23-04-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml448(para) msgid "" "Adds installation and configuration for multi-node Object Storage service." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml456(date) msgid "2012-04-17" msgstr "17-04-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml460(para) msgid "" "Doc bug fixes: 983417, 984106, 984034" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml472(date) msgid "2012-04-13" msgstr "13-04-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml476(para) msgid "" "Doc bug fixes: 977905, 980882, 977823, adds additional Glance database " "preparation steps" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml490(date) msgid "2012-04-10" msgstr "10-04-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml494(para) msgid "" "Doc bug fixes: 977831" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml502(date) msgid "2012-03-23" msgstr "23-03-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml506(para) msgid "Updates for Xen hypervisor." msgstr "Mises à jour pour l'hyperviseur Xen." #: ./doc/install-guide/bk_openstackinstallguide.xml512(date) msgid "2012-03-09" msgstr "09-03-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml516(para) msgid "" "Updates for Essex release, includes new Glance config files, new Keystone " "configuration." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml524(date) msgid "2012-01-24" msgstr "24-01-2012" #: ./doc/install-guide/bk_openstackinstallguide.xml528(para) msgid "Initial draft for Essex." msgstr "Brouillon initial pour Essex." #: ./doc/install-guide/bk_openstackinstallguide.xml531(para) msgid "Assumes use of Ubuntu 12.04 repository." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml540(date) msgid "2011-01-24" msgstr "24-01-2011" #: ./doc/install-guide/bk_openstackinstallguide.xml544(para) msgid "Initial draft for Diablo." msgstr "Brouillon initial pour Diablo." #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-install.xml21(None) msgid "" "@@image: 'figures/debconf-screenshots/neutron_1_plugin_selection.png'; " "md5=adf41c33778a691a560b7098908792db" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-install.xml113(None) msgid "" "@@image: 'figures/debconf-screenshots/neutron_2_networking_type.png'; " "md5=0d4d788a44ae0a716a503dca20b82f22" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-install.xml122(None) msgid "" "@@image: 'figures/debconf-screenshots/neutron_3_hypervisor_ip.png'; " "md5=2beb543a6334f641d7b69ac5dcbcb3a8" msgstr "" #: ./doc/install-guide/section_neutron-install.xml8(title) msgid "Install Networking services" msgstr "" #: ./doc/install-guide/section_neutron-install.xml9(para) msgid "" "When you install a Networking node, you must configure it for API endpoints," " RabbitMQ, keystone_authtoken, and the database. Use " "debconf to configure these values." msgstr "" #: ./doc/install-guide/section_neutron-install.xml13(para) msgid "" "When you install a Networking package, debconf prompts " "you to choose configuration options including which plug-in to use, as " "follows:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml25(para) msgid "" "This parameter sets the core_plugin option value in " "the /etc/neutron/neutron.conf file." msgstr "" #: ./doc/install-guide/section_neutron-install.xml29(para) msgid "" "When you install the neutron-common package, all plug-ins" " are installed by default." msgstr "" #: ./doc/install-guide/section_neutron-install.xml32(para) msgid "" "This table lists the values for the core_plugin " "option. These values depend on your response to the " "debconf prompt." msgstr "" #: ./doc/install-guide/section_neutron-install.xml36(caption) msgid "Plug-ins and the core_plugin option" msgstr "" #: ./doc/install-guide/section_neutron-install.xml39(th) msgid "Plug-in" msgstr "" #: ./doc/install-guide/section_neutron-install.xml41(filename) msgid "neutron.conf" msgstr "" #: ./doc/install-guide/section_neutron-install.xml40(th) msgid "core_plugin value in " msgstr "" #: ./doc/install-guide/section_neutron-install.xml46(para) msgid "BigSwitch" msgstr "" #: ./doc/install-guide/section_neutron-install.xml47(para) msgid "neutron.plugins.bigswitch.plugin.NeutronRestProxyV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml50(para) msgid "Brocade" msgstr "" #: ./doc/install-guide/section_neutron-install.xml51(para) msgid "neutron.plugins.brocade.NeutronPlugin.BrocadePluginV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml54(para) msgid "Cisco" msgstr "" #: ./doc/install-guide/section_neutron-install.xml55(para) msgid "neutron.plugins.cisco.network_plugin.PluginV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml58(para) msgid "Hyper-V" msgstr "" #: ./doc/install-guide/section_neutron-install.xml59(para) msgid "neutron.plugins.hyperv.hyperv_neutron_plugin.HyperVNeutronPlugin" msgstr "" #: ./doc/install-guide/section_neutron-install.xml62(para) msgid "LinuxBridge" msgstr "" #: ./doc/install-guide/section_neutron-install.xml63(para) msgid "neutron.plugins.linuxbridge.lb_neutron_plugin.LinuxBridgePluginV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml66(para) msgid "Mellanox" msgstr "" #: ./doc/install-guide/section_neutron-install.xml67(para) msgid "neutron.plugins.mlnx.mlnx_plugin.MellanoxEswitchPlugin" msgstr "" #: ./doc/install-guide/section_neutron-install.xml70(para) msgid "MetaPlugin" msgstr "" #: ./doc/install-guide/section_neutron-install.xml71(para) msgid "neutron.plugins.metaplugin.meta_neutron_plugin.MetaPluginV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml74(para) msgid "Midonet" msgstr "" #: ./doc/install-guide/section_neutron-install.xml75(para) msgid "neutron.plugins.midonet.plugin.MidonetPluginV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml78(para) msgid "ml2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml79(para) msgid "neutron.plugins.ml2.plugin.Ml2Plugin" msgstr "" #: ./doc/install-guide/section_neutron-install.xml82(para) msgid "Nec" msgstr "" #: ./doc/install-guide/section_neutron-install.xml83(para) msgid "neutron.plugins.nec.nec_plugin.NECPluginV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml86(para) msgid "OpenVSwitch" msgstr "" #: ./doc/install-guide/section_neutron-install.xml87(para) msgid "neutron.plugins.openvswitch.ovs_neutron_plugin.OVSNeutronPluginV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml90(para) msgid "PLUMgrid" msgstr "" #: ./doc/install-guide/section_neutron-install.xml91(para) msgid "" "neutron.plugins.plumgrid.plumgrid_nos_plugin.plumgrid_plugin.NeutronPluginPLUMgridV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml94(para) msgid "RYU" msgstr "" #: ./doc/install-guide/section_neutron-install.xml95(para) msgid "neutron.plugins.ryu.ryu_neutron_plugin.RyuNeutronPluginV2" msgstr "" #: ./doc/install-guide/section_neutron-install.xml99(para) msgid "" "Depending on the value of core_plugin, the start-up " "scripts start the daemons by using the corresponding plug-in configuration " "file directly. For example, if you selected the Open vSwitch plug-in, neutron-server automatically launches with --config-file " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini." msgstr "" #: ./doc/install-guide/section_neutron-install.xml106(para) msgid "" "The neutron-common package also prompts you for the " "default network configuration:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml126(para) msgid "" "Before you configure individual nodes for Networking, you must create the " "required OpenStack components: user, service, database, and one or more " "endpoints. After you complete these steps on the controller node, follow the" " instructions in this guide to set up OpenStack Networking nodes." msgstr "" #. TODO(sross): move this into its own section #: ./doc/install-guide/section_neutron-install.xml136(para) msgid "" "Use the password that you set previously to log in as root and create a " "neutron database:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml146(para) msgid "" "Create the required user, service, and endpoint so that Networking can " "interface with the Identity Service." msgstr "" #: ./doc/install-guide/section_neutron-install.xml148(para) msgid "Create a neutron user:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml149(replaceable) msgid "neutron@example.com" msgstr "" #: ./doc/install-guide/section_neutron-install.xml150(para) msgid "Add the user role to the neutron user:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml152(para) msgid "Create the neutron service:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml155(para) msgid "" "Create a Networking endpoint. Use the id property for the" " service that was returned in the previous step to create the endpoint:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml166(title) msgid "Install Networking services on a dedicated network node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml169(para) msgid "" "Before you start, set up a machine as a dedicated network node. Dedicated " "network nodes have a MGMT_INTERFACE NIC, a " "DATA_INTERFACE NIC, and a " "EXTERNAL_INTERFACE NIC." msgstr "" #: ./doc/install-guide/section_neutron-install.xml174(para) msgid "" "The management network handles communication among nodes. The data network " "handles communication coming to and from VMs. The external NIC connects the " "network node, and optionally to the controller node, so your VMs can connect" " to the outside world." msgstr "" #: ./doc/install-guide/section_neutron-install.xml179(para) msgid "" "All NICs must have static IPs. However, the data and external NICs have a " "special set up. For details about Networking plug-ins, see ." msgstr "" #: ./doc/install-guide/section_neutron-install.xml185(para) msgid "" "By default, the system-config-firewall automated firewall" " configuration tool is in place on RHEL. This graphical interface (and a " "curses-style interface with -tui on the end of the name) " "enables you to configure IP tables as a basic firewall. You should disable " "it when you work with Networking unless you are familiar with the underlying" " network technologies, as, by default, it blocks various types of network " "traffic that are important to Networking. To disable it, simply launch the " "program and clear the Enabled check box." msgstr "" #: ./doc/install-guide/section_neutron-install.xml195(para) msgid "" "After you successfully set up OpenStack Networking, you can re-enable and " "configure the tool. However, during Networking set up, disable the tool to " "make it easier to debug network issues." msgstr "" #: ./doc/install-guide/section_neutron-install.xml202(para) msgid "Install the Networking packages and any dependencies." msgstr "" #: ./doc/install-guide/section_neutron-install.xml210(para) msgid "" "Respond to prompts for database " "management, [keystone_authtoken] " "settings, RabbitMQ " "credentials and API " "endpoint registration." msgstr "" #: ./doc/install-guide/section_neutron-install.xml221(para) msgid "Configure basic Networking-related services to start at boot time:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml227(para) msgid "" "Enable packet forwarding and disable packet destination filtering so that " "the network node can coordinate traffic for the VMs. Edit the " "/etc/sysctl.conf file, as follows:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml234(para) msgid "" "Use the command to ensure the changes made to the " "/etc/sysctl.conf file take effect:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml239(para) msgid "" "It is recommended that the networking service is restarted after changing " "values related to the networking configuration. This ensures that all " "modified values take effect immediately:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml248(para) #: ./doc/install-guide/section_neutron-install.xml829(para) #: ./doc/install-guide/section_neutron-install.xml1223(para) msgid "" "Configure Networking to use keystone for authentication:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml251(para) #: ./doc/install-guide/section_neutron-install.xml276(para) #: ./doc/install-guide/section_neutron-install.xml832(para) #: ./doc/install-guide/section_neutron-install.xml1226(para) msgid "" "Set the auth_strategy configuration key to " "keystone in the DEFAULT section of the" " file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml257(para) #: ./doc/install-guide/section_neutron-install.xml838(para) #: ./doc/install-guide/section_neutron-install.xml1232(para) msgid "" "Set the neutron configuration for" " keystone authentication:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml272(para) msgid "" "To configure neutron to use " "keystone for authentication, edit" " the /etc/neutron/neutron.conffile." msgstr "" #: ./doc/install-guide/section_neutron-install.xml282(para) msgid "" "Add these lines to the keystone_authtoken section of the " "file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml295(para) #: ./doc/install-guide/section_neutron-install.xml894(para) #: ./doc/install-guide/section_neutron-install.xml1342(para) msgid "" "Set the root_helper configuration in the " "[agent] section of " "/etc/neutron/neutron.conf:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml312(para) msgid "" "Configure the RabbitMQ access. Edit the " "/etc/neutron/neutron.conf file to modify the following " "parameters in the DEFAULT section." msgstr "" #: ./doc/install-guide/section_neutron-install.xml339(para) #: ./doc/install-guide/section_neutron-install.xml905(para) msgid "" "Configure Networking to connect to the database. Edit the " "[database] section in the same file, as follows:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml346(para) #: ./doc/install-guide/section_neutron-install.xml923(para) #: ./doc/install-guide/section_neutron-install.xml1290(para) msgid "" "Configure the /etc/neutron/api-paste.ini file for " "keystone authentication:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml362(para) #: ./doc/install-guide/section_neutron-install.xml912(para) msgid "" "Edit the /etc/neutron/api-paste.ini file and add these " "lines to the [filter:authtoken] section:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml373(para) msgid "" "keystoneclient.middleware.auth_token: You must configure " "auth_uri to point to the public identity endpoint. " "Otherwise, clients might not be able to authenticate against an admin " "endpoint." msgstr "" #: ./doc/install-guide/section_neutron-install.xml380(para) msgid "" "Configure your network plug-in. For instructions, see instructions. Then, return here." msgstr "" #: ./doc/install-guide/section_neutron-install.xml385(para) msgid "" "Install and configure a networking plug-in. OpenStack Networking uses this " "plug-in to perform software-defined networking. See for further details. Then, return here when " "finished." msgstr "" #: ./doc/install-guide/section_neutron-install.xml391(para) msgid "" "Now that you've installed and configured a plug-in, it is time to configure " "the remaining parts of OpenStack Networking." msgstr "" #: ./doc/install-guide/section_neutron-install.xml395(para) msgid "" "To perform DHCP on the software-defined networks, Networking supports " "several different plug-ins. However, in general, you use the " "dnsmasq plug-in." msgstr "" #: ./doc/install-guide/section_neutron-install.xml398(para) msgid "Configure the /etc/neutron/dhcp_agent.ini file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml407(para) msgid "" "To allow virtual machines to access the Compute metadata information, the " "Networking metadata agent must be enabled and configured. The agent will act" " as a proxy for the Compute metadata service." msgstr "" #: ./doc/install-guide/section_neutron-install.xml411(para) msgid "" "On the controller, edit the /etc/nova/nova.conf file to" " define a secret key that will be shared between the Compute Service and the" " Networking metadata agent." msgstr "" #: ./doc/install-guide/section_neutron-install.xml415(para) msgid "Add to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml418(replaceable) #: ./doc/install-guide/section_neutron-install.xml424(replaceable) #: ./doc/install-guide/section_neutron-install.xml443(replaceable) #: ./doc/install-guide/section_neutron-install.xml459(replaceable) msgid "METADATA_PASS" msgstr "" #: ./doc/install-guide/section_neutron-install.xml420(para) msgid "Set the neutron_metadata_proxy_shared_secret key:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml427(para) msgid "Restart the nova-api service:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml431(para) msgid "On the network node, modify the metadata agent configuration." msgstr "" #: ./doc/install-guide/section_neutron-install.xml433(para) msgid "" "Edit the /etc/neutron/metadata_agent.ini file and " "modify the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml444(para) msgid "Set the required keys:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml461(para) msgid "" "The value of auth_region is case-sensitive and must match" " the endpoint region defined in Keystone." msgstr "" #: ./doc/install-guide/section_neutron-install.xml467(para) #: ./doc/install-guide/section_neutron-install.xml1431(para) msgid "" "The neutron-server initialization" " script expects a symbolic link /etc/neutron/plugin.ini" " pointing to the configuration file associated with your chosen plug-in. " "Using Open vSwitch, for example, the symbolic link must point to " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini." " If this symbolic link does not exist, create it using the following " "commands:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml479(para) #: ./doc/install-guide/section_neutron-install.xml1443(para) msgid "" "The openstack-neutron " "initialization script expects the variable " "NEUTRON_PLUGIN_CONF in file " "/etc/sysconfig/neutron to reference the configuration " "file associated with your chosen plug-in. Using Open vSwitch, for example, " "edit the /etc/sysconfig/neutron file and add the " "following:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml490(para) msgid "Restart Networking services." msgstr "" #: ./doc/install-guide/section_neutron-install.xml500(para) #: ./doc/install-guide/section_neutron-install.xml1023(para) msgid "" "Also restart your chosen Networking plug-in agent, for example, Open " "vSwitch." msgstr "" #: ./doc/install-guide/section_neutron-install.xml506(para) msgid "" "After you configure the compute and controller nodes, configure the base networks." msgstr "" #: ./doc/install-guide/section_neutron-install.xml516(title) msgid "Install and configure the Networking plug-ins" msgstr "" #: ./doc/install-guide/section_neutron-install.xml518(title) msgid "Install the Open vSwitch (OVS) plug-in" msgstr "" #: ./doc/install-guide/section_neutron-install.xml521(para) #: ./doc/install-guide/section_neutron-install.xml1037(para) msgid "Install the Open vSwitch plug-in and its dependencies:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml527(para) msgid "" "On Ubuntu 12.04 LTS with GRE you must install openvswitch-datapath-dkms and " "restart the service to enable the GRE flow so that OVS 1.10 and higher is " "used. Make sure you are running the OVS 1.10 kernel module in addition to " "the OVS 1.10 user space. Both the kernel module and user space are required " "for VXLAN support. The error you see in the /var/log" "/openvswitchovs-vswitchd.log log file is \"Stderr: 'ovs-ofctl: " "-1: negative values not supported for in_port\\n'\". If you see this error, " "make sure shows the right version. Also check the output " "from for the version of the OVS module being loaded." msgstr "" #: ./doc/install-guide/section_neutron-install.xml544(para) msgid "Start Open vSwitch:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml548(para) msgid "And configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml554(para) msgid "" "No matter which networking technology you use, you must add the br-" "int integration bridge, which connects to the VMs, and the " "br-ex external bridge, which connects to the outside " "world." msgstr "" #: ./doc/install-guide/section_neutron-install.xml563(para) msgid "" "Add a port (connection) from the " "EXTERNAL_INTERFACE interface to br-" "ex interface:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml566(replaceable) #: ./doc/install-guide/section_neutron-install.xml573(replaceable) msgid "EXTERNAL_INTERFACE" msgstr "" #: ./doc/install-guide/section_neutron-install.xml568(para) msgid "" "The host must have an IP address associated with an interface other than " "EXTERNAL_INTERFACE, and your remote terminal " "session must be associated with this other IP address." msgstr "" #: ./doc/install-guide/section_neutron-install.xml572(para) msgid "" "If you associate an IP address with " "EXTERNAL_INTERFACE, that IP address stops working" " after you issue the command. If you associate a remote " "terminal session with that IP address, you lose connectivity with the host." msgstr "" #: ./doc/install-guide/section_neutron-install.xml576(para) msgid "" "For more details about this behavior, see the Configuration " "Problems section of the Open vSwitch " "FAQ." msgstr "" #: ./doc/install-guide/section_neutron-install.xml583(para) msgid "" "Configure the EXTERNAL_INTERFACE without an IP " "address and in promiscuous mode. Additionally, you must set the newly " "created br-ex interface to have the IP address that " "formerly belonged to EXTERNAL_INTERFACE." msgstr "" #: ./doc/install-guide/section_neutron-install.xml590(para) msgid "" "Generic Receive Offload (GRO) should not be enabled on this interface as it " "can cause severe performance problems. It can be disabled with the ethtool " "utility." msgstr "" #: ./doc/install-guide/section_neutron-install.xml595(para) msgid "" "Edit the /etc/sysconfig/network-scripts/ifcfg-" "EXTERNAL_INTERFACE file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml604(para) msgid "" "Create and edit the /etc/sysconfig/network-scripts/ifcfg-br-" "ex file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml617(para) msgid "" "You must set some common configuration options no matter which networking " "technology you choose to use with Open vSwitch. Configure the L3 and DHCP " "agents to use OVS and namespaces. Edit the " "/etc/neutron/l3_agent.ini and " "/etc/neutron/dhcp_agent.ini files, respectively:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml626(para) msgid "" "You must enable veth support if you use certain kernels. Some kernels, such " "as recent versions of RHEL (not RHOS) and CentOS, only partially support " "namespaces. Edit the previous files, as follows:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml634(para) msgid "" "Similarly, you must also tell Neutron core to use OVS. " "Edit the /etc/neutron/neutron.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml641(para) msgid "" "Choose a networking technology to create the virtual networks. Neutron " "supports GRE tunneling, VLANs, and VXLANs. This guide shows how to configure" " GRE tunneling and VLANs." msgstr "" #: ./doc/install-guide/section_neutron-install.xml645(para) msgid "" "GRE " "tunneling is simpler to set up because it does not require any " "special configuration from any physical network hardware. However, its " "protocol makes it difficult to filter traffic on the physical network. " "Additionally, this configuration does not use namespaces. You can have only " "one router for each network node. However, you can enable namespacing, and " "potentially veth, as described in the section detailing how to use VLANs " "with OVS)." msgstr "" #: ./doc/install-guide/section_neutron-install.xml656(para) msgid "" "On the other hand, VLAN tagging modifies the ethernet header of packets. " "You can filter packets on the physical network through normal methods. " "However, not all NICs handle the increased packet size of VLAN-tagged " "packets well, and you might need to complete additional configuration on " "physical network hardware to ensure that your Neutron VLANs do not interfere" " with any other VLANs on your network and that any physical network hardware" " between nodes does not strip VLAN tags." msgstr "" #: ./doc/install-guide/section_neutron-install.xml668(para) msgid "" "While the examples in this guide enable network namespaces by default, you " "can disable them if issues occur or your kernel does not support them. Edit " "the /etc/neutron/l3_agent.ini and " "/etc/neutron/dhcp_agent.ini files, respectively:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml675(para) msgid "" "Edit the /etc/neutron/neutron.conf file to disable " "overlapping IP addresses:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml679(para) msgid "" "Note that when network namespaces are disabled, you can have only one router" " for each network node and overlapping IP addresses are not supported." msgstr "" #: ./doc/install-guide/section_neutron-install.xml682(para) msgid "" "You must complete additional steps after you create the initial Neutron " "virtual networks and router." msgstr "" #: ./doc/install-guide/section_neutron-install.xml689(para) msgid "" "Configure a firewall plug-in. If you do not wish to enforce firewall rules, " "called security groups by" " OpenStack, you can use " "neutron.agent.firewall.NoopFirewall. Otherwise, you can " "choose one of the Networking firewall plug-ins. The most common choice is " "the Hybrid OVS-IPTables driver, but you can also use the Firewall-" "as-a-Service driver. Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml704(para) #: ./doc/install-guide/section_neutron-install.xml1098(para) msgid "" "You must use at least the No-Op firewall. Otherwise, Horizon and other " "OpenStack services cannot get and set required VM boot options." msgstr "" #: ./doc/install-guide/section_neutron-install.xml711(para) #: ./doc/install-guide/section_neutron-install.xml1104(para) msgid "Configure the OVS plug-in to start on boot." msgstr "" #: ./doc/install-guide/section_neutron-install.xml717(para) #: ./doc/install-guide/section_neutron-install.xml1110(para) #: ./doc/install-guide/section_neutron-install.xml1137(para) #: ./doc/install-guide/section_neutron-install.xml1505(para) #: ./doc/install-guide/section_neutron-install.xml1668(para) msgid "Now, return to the general OVS instructions." msgstr "" #: ./doc/install-guide/section_neutron-install.xml722(title) msgid "Configure the Neutron OVS plug-in for GRE tunneling" msgstr "" #: ./doc/install-guide/section_neutron-install.xml726(para) msgid "" "Configure the OVS plug-in to use GRE tunneling, the " "br-int integration bridge, the br-tun " "tunneling bridge, and a local IP for the " "DATA_INTERFACE tunnel IP. Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml743(para) #: ./doc/install-guide/section_neutron-install.xml1165(para) #: ./doc/install-guide/section_neutron-install.xml1525(para) #: ./doc/install-guide/section_neutron-install.xml1544(para) msgid "Return to the general OVS instructions." msgstr "" #: ./doc/install-guide/section_neutron-install.xml749(title) msgid "Configure the Neutron OVS plug-in for VLANs" msgstr "" #: ./doc/install-guide/section_neutron-install.xml753(para) msgid "" "Configure OVS to use VLANS. Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml763(para) msgid "" "Create the bridge for DATA_INTERFACE and add " "DATA_INTERFACE to it:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml771(para) msgid "" "Transfer the IP address for DATA_INTERFACE to the" " bridge in the same way that you transferred the " "EXTERNAL_INTERFACE IP address to br-" "ex. However, do not turn on promiscuous mode." msgstr "" #: ./doc/install-guide/section_neutron-install.xml779(para) msgid "Return to the OVS general instruction." msgstr "" #: ./doc/install-guide/section_neutron-install.xml788(title) msgid "Install networking support on a dedicated compute node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml791(para) msgid "" "This section details set up for any node that runs the nova-" "compute component but does not run the full network stack." msgstr "" #: ./doc/install-guide/section_neutron-install.xml796(para) #: ./doc/install-guide/section_neutron-install.xml1185(para) msgid "" "By default, the system-config-firewall automated firewall" " configuration tool is in place on RHEL. This graphical interface (and a " "curses-style interface with -tui on the end of the name) " "enables you to configure IP tables as a basic firewall. You should disable " "it when you work with Neutron unless you are familiar with the underlying " "network technologies, as, by default, it blocks various types of network " "traffic that are important to Neutron. To disable it, simple launch the " "program and clear the Enabled check box." msgstr "" #: ./doc/install-guide/section_neutron-install.xml806(para) #: ./doc/install-guide/section_neutron-install.xml1195(para) msgid "" "After you successfully set up OpenStack with Neutron, you can re-enable and " "configure the tool. However, during Neutron set up, disable the tool to make" " it easier to debug network issues." msgstr "" #: ./doc/install-guide/section_neutron-install.xml813(para) msgid "" "Disable packet destination filtering (route verification) to let the " "networking services route traffic to the VMs. Edit the " "/etc/sysctl.conf file and run the following command to " "activate changes:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml823(para) msgid "" "Install and configure your networking plug-in components. To install and " "configure the network plug-in that you chose when you set up your network " "node, see ." msgstr "" #: ./doc/install-guide/section_neutron-install.xml877(para) msgid "" "Configure the core components of Neutron. Edit the " "/etc/neutron/neutron.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml937(para) #: ./doc/install-guide/section_neutron-install.xml1356(para) msgid "" "Configure OpenStack Compute to use OpenStack Networking services. Configure " "the /etc/nova/nova.conf file as per instructions below:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml960(para) #: ./doc/install-guide/section_neutron-install.xml1379(para) msgid "" "Configure OpenStack Compute to use OpenStack Networking services. Edit the " "/etc/nova/nova.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml976(para) msgid "" "No matter which firewall driver you chose when you configured the network " "and compute nodes, you must edit the " "/etc/nova/nova.conf file to set the firewall driver to " "nova.virt.firewall.NoopFirewallDriver. Because OpenStack " "Networking handles the firewall, this statement instructs Compute to not use" " a firewall." msgstr "" #: ./doc/install-guide/section_neutron-install.xml986(para) msgid "" "If you want Networking to handle the firewall, edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file to set the firewall_driver option to the firewall for the" " plug-in. For example, with OVS, edit the file as " "follows:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1001(para) msgid "" "If you do not want to use a firewall in Compute or Networking, edit both " "configuration files and set " "firewall_driver=nova.virt.firewall.NoopFirewallDriver. Also, " "edit the /etc/nova/nova.conf file and comment out or " "remove the security_group_api=neutron statement." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1009(para) msgid "" "Otherwise, when you issue commands, the ERROR: " "The server has either erred or is incapable of performing the requested " "operation. (HTTP 500) error might be returned." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1019(para) #: ./doc/install-guide/section_nova-compute.xml239(para) msgid "Restart the Compute service." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1030(title) msgid "Install and configure Neutron plug-ins on a dedicated compute node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1033(title) msgid "Install the Open vSwitch (OVS) plug-in on a dedicated compute node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1044(para) msgid "Restart Open vSwitch:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1048(para) msgid "Start Open vSwitch and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1056(para) msgid "" "You must set some common configuration options no matter which networking " "technology you choose to use with Open vSwitch. You must add the br-int integration bridge, which connects to the VMs." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1064(para) msgid "" "You must set some common configuration options. You must configure " "Networking core to use OVS. Edit the " "/etc/neutron/neutron.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1076(para) msgid "" "Configure the networking type that you chose when you set up the network " "node: either GRE tunneling or VLANs." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1085(para) msgid "" "You must configure a firewall as well. You should use the same firewall " "plug-in that you chose to use when you set up the network node. To do this, " "edit " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file and set the firewall_driver value under the " "securitygroup to the same value used on the network node." " For instance, if you chose to use the Hybrid OVS-IPTables plug-in, your " "configuration looks like this:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1116(title) msgid "" "Configure the Neutron OVS plug-in for GRE tunneling on a " "dedicated compute node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1120(para) msgid "" "Tell the OVS plug-in to use GRE tunneling with a br-int integration bridge, a br-tun tunneling " "bridge, and a local IP for the tunnel of " "DATA_INTERFACE's IP Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1134(replaceable) msgid "DATA_INTERFACE_IP" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1144(title) msgid "" "Configure the Neutron OVS plug-in for VLANs on a " "dedicated compute node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1148(para) msgid "" "Tell OVS to use VLANs. Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1154(replaceable) msgid "DATA_INTERFACE" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1157(para) msgid "" "Create the bridge for the DATA_INTERFACE and add " "DATA_INTERFACE to it, the same way you did on the" " network node:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1174(title) msgid "Install networking support on a dedicated controller node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1177(para) msgid "" "This is for a node which runs the control components of Neutron, but does " "not run any of the components that provide the underlying functionality " "(such as the plug-in agent or the L3 agent). If you wish to have a combined " "controller/compute node follow these instructions, and then those for the " "compute node." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1202(para) msgid "Install the server component of Networking and any dependencies." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1213(para) msgid "" "Configure Networking to use your MySQL database. Edit the " "/etc/neutron/neutron.conf file and add the following " "key under the [database] section. Replace " "NEUTRON_DBPASS with the password you chose for " "the Neutron database." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1247(para) msgid "" "Configure Networking to use keystone as the Identity Service for " "authentication." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1251(para) msgid "" "Edit the /etc/neutron/neutron.conf file and add the " "following key under the [DEFAULT] section." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1258(para) msgid "" "Add the following keys under the [keystone_authtoken] " "section. Replace NEUTRON_PASS with the password " "you chose for the Neutron user in Keystone." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1275(para) msgid "" "Edit the /etc/neutron/api-paste.ini file and add the " "following keys under the [filter:authtoken] section. " "Replace NEUTRON_PASS with the password you chose " "for the Neutron user in Keystone." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1328(para) msgid "" "Configure Networking to use your message broker. Edit the " "/etc/neutron/neutron.conf file and add the following " "keys under the [DEFAULT] section." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1332(para) msgid "" "Replace RABBIT_PASS with the password you chose " "for RabbitMQ." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1348(para) msgid "" "Although the controller node does not run any Networking agents, you must " "install and configure the same plug-in that you configured on the network " "node." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1351(link) msgid "" "Install and configure the Networking plug-ins on a dedicated controller node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1395(para) msgid "" "Regardless of which firewall driver you chose when you configured the " "network and compute nodes, set this driver as the No-Op firewall. This " "firewall is a nova firewall, and " "because neutron handles the " "Firewall, you must tell nova not " "to use one." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1402(para) msgid "" "When Networking handles the firewall, the option " "firewall_driver should be set according to the specified plug-" "in. For example with OVS, edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1416(para) msgid "" "If you do not want to use a firewall in Compute or Networking, set " "firewall_driver=nova.virt.firewall.NoopFirewallDriver in both " "config files, and comment out or remove " "security_group_api=neutron in the " "/etc/nova/nova.conf file, otherwise you may encounter " "ERROR: The server has either erred or is incapable of performing " "the requested operation. (HTTP 500) when issuing " " commands." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1454(para) msgid "" "Start neutron-server and set it " "to start at boot:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1463(para) msgid "Restart neutron-server:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1469(title) msgid "" "Install and configure the Neutron plug-ins on a dedicated controller node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1472(title) msgid "Install the Open vSwitch (OVS) plug-in on a dedicated controller node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1476(para) msgid "Install the Open vSwitch plug-in:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1482(para) msgid "" "You must set some common configuration options no matter which networking " "technology you choose to use with Open vSwitch. You must configure " "Networking core to use OVS. Edit the " "/etc/neutron/neutron.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1491(para) msgid "" "Configure the OVS plug-in for the networking type that " "you chose when you configured the network node: GRE tunneling or VLANs." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1500(para) msgid "" "The dedicated controller node does not need to run Open vSwitch or the Open " "vSwitch agent." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1511(title) msgid "" "Configure the Neutron OVS plug-in for GRE tunneling on a " "dedicated controller node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1515(para) msgid "" "Tell the OVS plug-in to use GRE tunneling. Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1532(title) msgid "" "Configure the Neutron OVS plug-in for VLANs on a " "dedicated controller node" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1536(para) msgid "" "Tell OVS to use VLANS. Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file, as follows:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1553(title) msgid "Create the base Neutron networks" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1555(para) msgid "" "In these sections, replace SPECIAL_OPTIONS with " "any options specific to your Networking plug-in choices. See here to " "check if your plug-in requires any special options." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1564(para) msgid "" "Create the ext-net external network. This network " "represents a slice of the outside world. VMs are not directly linked to this" " network; instead, they connect to internal networks. Outgoing traffic is " "routed by Neutron to the external network. Additionally, floating IP " "addresses from the subnet for ext-net might be assigned " "to VMs so that the external network can contact them. Neutron routes the " "traffic appropriately." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1573(replaceable) #: ./doc/install-guide/section_neutron-install.xml1618(replaceable) msgid "SPECIAL_OPTIONS" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1576(para) msgid "" "Create the associated subnet with the same gateway and CIDR as " "EXTERNAL_INTERFACE. It does not have DHCP because" " it represents a slice of the external world:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1581(replaceable) msgid "FLOATING_IP_START" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1581(replaceable) msgid "FLOATING_IP_END" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1582(replaceable) msgid "EXTERNAL_INTERFACE_GATEWAY" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1583(replaceable) msgid "EXTERNAL_INTERFACE_CIDR" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1586(para) msgid "Create one or more initial tenants, for example:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1587(replaceable) #: ./doc/install-guide/section_neutron-install.xml1602(replaceable) msgid "DEMO_TENANT" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1588(para) msgid "See for further details." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1590(para) msgid "See for further details." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1594(para) msgid "" "Create the router attached to the external network. This router routes " "traffic to the internal subnets as appropriate. You can create it under a " "given tenant: Append --tenant-id option with a value of " "DEMO_TENANT_ID to the command." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1600(para) msgid "" "Use the following to quickly get the DEMO_TENANT " "tenant-id:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1603(para) msgid "Then create the router:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1604(replaceable) #: ./doc/install-guide/section_neutron-install.xml1618(replaceable) #: ./doc/install-guide/section_neutron-install.xml1619(replaceable) msgid "DEMO_TENANT_ID" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1607(para) msgid "" "Connect the router to ext-net by setting the gateway for " "the router as ext-net:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1610(replaceable) #: ./doc/install-guide/section_neutron-install.xml1620(replaceable) #: ./doc/install-guide/section_neutron-install.xml1651(replaceable) msgid "EXT_TO_INT_ID" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1610(replaceable) #: ./doc/install-guide/section_neutron-install.xml1650(replaceable) msgid "EXT_NET_ID" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1613(para) msgid "" "Create an internal network for DEMO_TENANT (and " "associated subnet over an arbitrary internal IP range, such as, " "10.5.5.0/24), and connect it to the router by setting it " "as a port:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1620(replaceable) msgid "DEMO_NET_SUBNET_ID" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1623(para) msgid "" "Check the special options page for your plug-in for remaining steps. Now, " "return to the general OVS instructions." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1630(title) msgid "Plug-in-specific Neutron network options" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1633(title) msgid "Open vSwitch Network configuration options" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1636(title) msgid "GRE tunneling network options" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1638(para) msgid "" "While this guide currently enables network namespaces by default, you can " "disable them if you have issues or your kernel does not support them. If you" " disabled namespaces, you must perform some additional configuration for the" " L3 agent." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1643(para) msgid "" "After you create all the networks, tell the L3 agent what the external " "network ID is, as well as the ID of the router associated with this machine " "(because you are not using namespaces, there can be only one router for each" " machine). To do this, edit the " "/etc/neutron/l3_agent.ini file:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1652(para) msgid "Then, restart the L3 agent:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1655(para) msgid "When creating networks, you should use the options:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1658(para) msgid "" "SEG_ID should be 2 for the " "external network, and just any unique number inside the tunnel range " "specified before for any other network." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1663(para) msgid "" "These options are not needed beyond the first network, as Neutron " "automatically increments the segmentation id and copy the network type " "option for any additional networks." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1673(title) msgid "VLAN network options" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1674(para) msgid "When creating networks, use these options:" msgstr "" #: ./doc/install-guide/section_neutron-install.xml1676(para) msgid "" "SEG_ID should be 2 for the " "external network, and just any unique number inside the vlan range specified" " above for any other network." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1681(para) msgid "" "These options are not needed beyond the first network, as Neutron " "automatically increments the segmentation ID and copies the network type and" " physical network options for any additional networks. They are only needed " "if you wish to modify those values in any way." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1689(para) msgid "" "Some NICs have Linux drivers that do not handle VLANs properly. See the " "ovs-vlan-bug-workaround and ovs-vlan-" "test man pages for more information. Additionally, you might try " "turning off rx-vlan-offload and tx-vlan-" "offload by using ethtool on the " "DATA_INTERFACE. Another potential caveat to VLAN " "functionality is that VLAN tags add an additional 4 bytes to the packet " "size. If your NICs cannot handle large packets, make sure to set the MTU to " "a value that is 4 bytes less than the normal value on the " "DATA_INTERFACE." msgstr "" #: ./doc/install-guide/section_neutron-install.xml1704(para) msgid "" "If you run OpenStack inside a virtualized environment (for testing " "purposes), switching to the virtio NIC type (or a similar" " technology if you are not using KVM/QEMU to run your host VMs) might solve " "the issue." msgstr "" #: ./doc/install-guide/ch_debconf.xml6(title) msgid "Configure OpenStack with debconf" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/ch_overview.xml57(None) msgid "" "@@image: 'figures/basic-architecture.svg'; " "md5=33d7a8c99d42020ff657f85d80cc06bd" msgstr "" #: ./doc/install-guide/ch_overview.xml6(title) msgid "Architecture" msgstr "Architecture" #: ./doc/install-guide/ch_overview.xml7(para) msgid "" "This install guide offers a few of the many ways to install OpenStack " "components and have them work together. It is meant as a \"choose your own " "adventure\" guide, not a comprehensive guide. The OpenStack " "Configuration Reference lists every option in all OpenStack " "services. Before you begin an installation adventure, here are some things " "you should know about OpenStack concepts." msgstr "" #: ./doc/install-guide/ch_overview.xml25(title) msgid "Example architectures" msgstr "" #: ./doc/install-guide/ch_overview.xml26(para) msgid "" "This guide enables you to choose your own OpenStack adventure. OpenStack is " "highly configurable to meet different needs with various compute, " "networking, and storage options." msgstr "" #: ./doc/install-guide/ch_overview.xml29(para) msgid "This guide uses the following example architectures:" msgstr "" #: ./doc/install-guide/ch_overview.xml32(para) #: ./doc/install-guide/ch_overview.xml53(title) msgid "Basic architecture with legacy networking" msgstr "" #: ./doc/install-guide/ch_overview.xml35(para) msgid "" "The controller node runs the Identity Service, Image Service, dashboard, and" " management portion of Compute. It also contains the associated API " "services, MySQL databases, and messaging system." msgstr "" #: ./doc/install-guide/ch_overview.xml41(para) msgid "" "The compute node runs the hypervisor portion of Compute, which operates " "tenant virtual machines. By default, Compute uses KVM as the hypervisor. " "Compute also provisions and operates tenant networks and implements security" " groups. You can run more than one compute node." msgstr "" #: ./doc/install-guide/ch_overview.xml48(para) msgid "When implementing this architecture, skip ." msgstr "" #: ./doc/install-guide/ch_overview.xml63(para) #: ./doc/install-guide/ch_overview.xml91(title) msgid "Basic architecture with OpenStack Networking (Neutron)" msgstr "" #: ./doc/install-guide/ch_overview.xml66(para) msgid "" "The controller node runs the Identity Service, Image Service, dashboard, and" " management portions of Compute and Networking. It also contains the " "associated API services, MySQL databases, and messaging system." msgstr "" #: ./doc/install-guide/ch_overview.xml72(para) msgid "" "The network node runs the Networking plug-in agent and several layer 3 " "agents that provision tenant networks and provide services to them, " "including routing, NAT, and DHCP. It also handles external (internet) " "connectivity for tenant virtual machines." msgstr "" #: ./doc/install-guide/ch_overview.xml79(para) msgid "" "The compute node runs the hypervisor portion of Compute, which operates " "tenant virtual machines. By default, Compute uses KVM as the hypervisor. The" " compute node also runs the Networking plug-in agent, which operates tenant " "networks and implements security groups. You can run more than one compute " "node." msgstr "" #: ./doc/install-guide/ch_overview.xml86(para) msgid "" "When implementing this architecture, skip ." msgstr "" #: ./doc/install-guide/ch_overview.xml101(para) msgid "" "You can add nodes that run Block Storage or Object Storage to either of " "these architectures." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml13(title) msgid "Install the dashboard" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml14(para) msgid "" "Before you can install and configure the dashboard, meet the requirements in" " ." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml18(para) msgid "" "When you install only Object Storage and the Identity Service, even if you " "install the dashboard, it does not pull up projects and is unusable." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml22(para) msgid "" "For more information about how to deploy the dashboard, see deployment" " topics in the developer documentation." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml28(para) msgid "" "Install the dashboard on the node that can contact the Identity Service as " "root:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml34(title) msgid "Note for Ubuntu users" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml36(para) msgid "" "Remove the openstack-dashboard-ubuntu-theme package. This" " theme prevents translations, several menus as well as the network map from " "rendering correctly: " msgstr "" #: ./doc/install-guide/section_dashboard-install.xml45(title) msgid "Note for Debian users" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml46(para) msgid "To install the Apache package:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml48(para) msgid "" "This command installs and configures Apache correctly, provided that the " "user asks for it during the debconf prompts. The default " "SSL certificate is self-signed, and it is probably wise to have it signed by" " a root Certificate Authority (CA)." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml57(para) msgid "" "Modify the value of CACHES['default']['LOCATION'] in " "/etc/openstack-" "dashboard/local_settings.py/etc/openstack-" "dashboard/local_settings/usr/share" "/openstack-dashboard/openstack_dashboard/local/local_settings.py " "to match the ones set in /etc/memcached.conf/etc/sysconfig/memcached." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml69(para) msgid "" "Open /etc/openstack-" "dashboard/local_settings.py/etc/openstack-dashboard/local_settings" " and look for this line:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml82(title) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml25(td) msgid "Notes" msgstr "Notes" #: ./doc/install-guide/section_dashboard-install.xml85(para) msgid "" "The address and port must match the ones set in /etc/memcached.conf/etc/sysconfig/memcached." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml90(para) msgid "" "If you change the memcached settings, you must restart the Apache web server" " for the changes to take effect." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml95(para) msgid "" "You can use options other than memcached option for session storage. Set the" " session back-end through the SESSION_ENGINE option." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml102(para) msgid "" "To change the timezone, use the dashboard or edit the /etc/openstack-" "dashboard/local_settings/etc" "/openstack-dashboard/local_settings.py/usr/share/openstack-" "dashboard/openstack_dashboard/local/local_settings.py file." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml111(para) msgid "Change the following parameter: TIME_ZONE = \"UTC\"" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml118(para) msgid "" "Update the ALLOWED_HOSTS in " "local_settings.py to include the addresses you wish to " "access the dashboard from." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml122(para) msgid "" "Edit /etc/openstack-" "dashboard/local_settings/etc" "/openstack-dashboard/local_settings.py/usr/share/openstack-" "dashboard/openstack_dashboard/local/local_settings.py:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml132(para) msgid "" "This guide assumes that you are running the Dashboard on the controller " "node. You can easily run the dashboard on a separate server, by changing the" " appropriate settings in local_settings.py." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml137(para) msgid "" "Edit /etc/openstack-" "dashboard/local_settings/etc" "/openstack-dashboard/local_settings.py/usr/share/openstack-" "dashboard/openstack_dashboard/local/local_settings.py and change " "OPENSTACK_HOST to the hostname of your Identity Service:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml149(para) msgid "Setup Apache configuration: " msgstr "" #: ./doc/install-guide/section_dashboard-install.xml156(para) msgid "" "By default, the openstack-dashboard package enables" " a database as session store. Before you continue, either change the session" " store set up as described in or " "finish the setup of the database session store as explained in ." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml166(para) msgid "Start the Apache web server and memcached:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml179(para) msgid "" "You can now access the dashboard at http://controller/horizonhttps://controller/http://controller/dashboardhttp://controller." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml186(para) msgid "" "Login with credentials for any user that you created with the OpenStack " "Identity Service." msgstr "" #: ./doc/install-guide/section_heat-install.xml5(title) msgid "Install the Orchestration service" msgstr "" #: ./doc/install-guide/section_heat-install.xml8(para) #: ./doc/install-guide/section_heat-install.xml24(para) msgid "Install the OpenStack Orchestration service on the controller node:" msgstr "" #: ./doc/install-guide/section_heat-install.xml13(para) msgid "" "Respond to prompts for database " "management, [keystone_authtoken] " "settings, RabbitMQ " "credentials and API " "endpoint registration." msgstr "" #: ./doc/install-guide/section_heat-install.xml31(para) msgid "" "In the configuration file, specify the location of the database where the " "Orchestration service stores data. These examples use a MySQL database with " "a heat user on the controller node. Replace " "HEAT_DBPASS with the password for the database " "user:" msgstr "" #: ./doc/install-guide/section_heat-install.xml38(replaceable) #: ./doc/install-guide/section_heat-install.xml44(replaceable) #: ./doc/install-guide/section_heat-install.xml59(replaceable) #: ./doc/install-guide/section_heat-install.xml61(replaceable) msgid "HEAT_DBPASS" msgstr "" #: ./doc/install-guide/section_heat-install.xml39(para) msgid "" "Edit /etc/heat/heat.conf and change the " "[DEFAULT] section." msgstr "" #: ./doc/install-guide/section_heat-install.xml48(para) msgid "" "By default, the Ubuntu packages create an SQLite database. Delete the " "heat.sqlite file that was created in the " "/var/lib/heat/ directory so that it does not get used " "by mistake." msgstr "" #: ./doc/install-guide/section_heat-install.xml54(para) msgid "" "Use the password that you set previously to log in as " "root and create a heat database user:" msgstr "" #: ./doc/install-guide/section_heat-install.xml64(para) msgid "Create the heat service tables:" msgstr "" #: ./doc/install-guide/section_heat-install.xml67(para) msgid "Ignore DeprecationWarning errors." msgstr "" #: ./doc/install-guide/section_heat-install.xml72(para) msgid "" "The Ubuntu packages do not correctly set up logging. Edit the " "/etc/heat/heat.conf file and change the " "[DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_heat-install.xml86(para) msgid "" "Configure the Orchestration Service to use the RabbitMQ message broker." msgstr "" #: ./doc/install-guide/section_heat-install.xml88(para) msgid "" "Edit /etc/heat/heat.conf and modify the " "[DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_heat-install.xml97(para) msgid "" "Create a heat user that the Orchestration service can use" " to authenticate with the Identity Service. Use the " "service tenant and give the user the " "admin role:" msgstr "" #: ./doc/install-guide/section_heat-install.xml101(replaceable) #: ./doc/install-guide/section_heat-install.xml116(replaceable) msgid "HEAT_PASS" msgstr "" #: ./doc/install-guide/section_heat-install.xml101(replaceable) msgid "heat@example.com" msgstr "" #: ./doc/install-guide/section_heat-install.xml105(para) msgid "" "Edit the /etc/heat/heat.conf file to change the " "[keystone_authtoken] and " "[ec2_authtoken] sections to add credentials to the " "Orchestration Service:" msgstr "" #: ./doc/install-guide/section_heat-install.xml122(para) msgid "" "Register the Heat and CloudFormation APIs with the Identity Service so that " "other OpenStack services can locate these APIs. Register the service and " "specify the endpoint:" msgstr "" #: ./doc/install-guide/section_heat-install.xml130(para) #: ./doc/install-guide/section_heat-install.xml141(para) msgid "" "Use the id property that is returned for the service to " "create the endpoint:" msgstr "" #: ./doc/install-guide/section_heat-install.xml156(para) msgid "" "Start the heat-api, heat-api-cfn and heat-engine services and configure them to start when the " "system boots:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml7(title) msgid "Install the Compute agent for the Telemetry service" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml9(para) msgid "" "OpenStack Telemetry is an API service that provides a collector and a range " "of disparate agents. This procedure details how to install the agent that " "runs on the compute node." msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml14(para) msgid "Install the Telemetry service on the Compute node:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml20(para) msgid "" "Set the following options in the /etc/nova/nova.conf " "file:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml33(para) msgid "" "Edit the /etc/nova/nova.conf file and add the following" " lines to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml47(para) msgid "Restart the Compute service:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml52(para) msgid "" "You must set the secret key that you defined previously. The Telemetry " "service nodes share this key as a shared secret:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml56(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "change these lines in the [DEFAULT] section. Replace " "ADMIN_TOKEN with the admin token that you created" " previously:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml72(para) msgid "Start the service and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_neutron-deploy-use-cases.xml6(title) msgid "Neutron deployment use cases" msgstr "" #: ./doc/install-guide/section_neutron-deploy-use-cases.xml7(para) msgid "" "This section describes how to configure the Networking service and its " "components for some typical use cases." msgstr "" #: ./doc/install-guide/section_nova-compute.xml5(title) msgid "Configure a Compute node" msgstr "" #: ./doc/install-guide/section_nova-compute.xml6(para) msgid "" "After you configure the Compute service on the controller node, you must " "configure another system as a Compute node. The Compute node receives " "requests from the controller node and hosts virtual machine instances. You " "can run all services on a single node, but the examples in this guide use " "separate systems. This makes it easy to scale horizontally by adding " "additional Compute nodes following the instructions in this section." msgstr "" #: ./doc/install-guide/section_nova-compute.xml13(para) msgid "" "The Compute service relies on a hypervisor to run virtual machine instances." " OpenStack can use various hypervisors, but this guide uses KVM." msgstr "" #: ./doc/install-guide/section_nova-compute.xml18(para) msgid "" "Configure the system. Use the instructions in ," " but note the following differences from the controller node:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml23(para) msgid "" "Use different IP addresses when you configure eth0. " "This guide uses 192.168.0.11 for the internal network. Do" " not configure eth1 with a static IP address. The " "networking component of OpenStack assigns and configures an IP address." msgstr "" #: ./doc/install-guide/section_nova-compute.xml31(para) msgid "" "Set the host name to compute1. To verify, use the " "uname -n parameter. Ensure that the IP addresses and host names" " for both nodes are listed in the /etc/hosts file on " "each system." msgstr "" #: ./doc/install-guide/section_nova-compute.xml38(para) msgid "" "Synchronize from the controller node. Follow the instructions in ." msgstr "" #: ./doc/install-guide/section_nova-compute.xml42(para) msgid "" "Install the MySQL client libraries. You do not need to install the MySQL " "database server or start the MySQL service." msgstr "" #: ./doc/install-guide/section_nova-compute.xml47(para) msgid "" "Enable the OpenStack packages for the distribution that you are using. See " "." msgstr "" #: ./doc/install-guide/section_nova-compute.xml54(para) msgid "" "After you configure the operating system, install the appropriate packages " "for the Compute service." msgstr "" #: ./doc/install-guide/section_nova-compute.xml58(para) msgid "" "When prompted to create a supermin appliance, respond " "." msgstr "" #: ./doc/install-guide/section_nova-compute.xml63(para) msgid "" "To use the meta-packages and install other components on your compute node, " "such as OVS Networking and Ceilometer agents, run this command:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml67(para) msgid "" "The controller node has the openstack-proxy-node and " "openstack-toaster meta-packages that install openstack-proxy-node and openstack-toaster at " "the same time." msgstr "" #: ./doc/install-guide/section_nova-compute.xml79(para) msgid "" "Respond to the prompts for database management, [keystone_authtoken] " "settings, RabbitMQ " "credentials, and API " "endpoint registration." msgstr "" #: ./doc/install-guide/section_nova-compute.xml88(para) msgid "" "For security reasons, the Linux kernel is not readable by normal users which" " restricts hypervisor services such as qemu and libguestfs. For details, see" " this " "bug. To make the current kernel readable, run: To " "also enable this override for all future kernel updates, create the file " "/etc/kernel/postinst.d/statoverride " "containing: Remember to make the file executable: " "" msgstr "" #: ./doc/install-guide/section_nova-compute.xml107(para) msgid "Edit the /etc/nova/nova.conf configuration file:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml118(para) msgid "" "Edit the /etc/nova/nova.conf configuration file and add" " these lines to the appropriate sections:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml131(para) msgid "" "Configure the Compute Service to use the Qpid message broker by setting " "these configuration keys:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml143(para) msgid "" "Configure the Compute Service to use the RabbitMQ message broker by setting " "these configuration keys:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml152(para) msgid "Configure Compute to provide remote console access to instances." msgstr "" #: ./doc/install-guide/section_nova-compute.xml159(para) msgid "" "Edit /etc/nova/nova.conf and add the following keys " "under the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml173(para) msgid "" "Specify the host that runs the Image Service. " "Edit /etc/nova/nova.conf file and add these lines to " "the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml184(para) msgid "" "If you install Compute on a virtual machine for testing purposes, you must " "determine whether your hypervisor and/or CPU support nested hardware " "acceleration using the following command:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml189(para) msgid "" "If this command returns a value of one or greater, your" " hypervisor and/or CPU support nested hardware acceleration which requires " "no additional configuration." msgstr "" #: ./doc/install-guide/section_nova-compute.xml193(para) msgid "" "If this command returns a value of zero, your " "hypervisor and/or CPU do not support nested hardware acceleration and " "libvirt must use QEMU instead of KVM. Edit the " "[DEFAULT] section in the /etc/nova/nova-" "compute.conf file to modify this key:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml203(para) msgid "" "If this command returns a value of zero, your " "hypervisor and/or CPU do not support nested hardware acceleration and " "libvirt must use QEMU instead of KVM. Configure " "libvirt to use QEMU:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml211(para) msgid "" "Edit the /etc/nova/api-paste.ini file to add the " "credentials to the [filter:authtoken] section:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml215(para) msgid "" "Files with the extension .ini sometimes need to be " "edited during initial setup. However, they should not be used for general " "configuration tasks." msgstr "" #: ./doc/install-guide/section_nova-compute.xml229(para) msgid "" "Ensure that the " "option is set in /etc/nova/nova.conf file." msgstr "" #: ./doc/install-guide/section_nova-compute.xml236(para) msgid "" "Start the Compute service and configure it to start when the system boots." msgstr "" #: ./doc/install-guide/section_nova-compute.xml253(para) msgid "Remove the SQLite database created by the packages:" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_glance-install.xml40(None) msgid "" "@@image: 'figures/debconf-screenshots/glance-common_pipeline_flavor.png'; " "md5=78bef92c36a140ad042074f6345d8917" msgstr "" #: ./doc/install-guide/section_glance-install.xml7(title) msgid "Install the Image Service" msgstr "" #: ./doc/install-guide/section_glance-install.xml8(para) msgid "" "The OpenStack Image Service acts as a registry for virtual disk images. " "Users can add new images or take a snapshot of an image from an existing " "server for immediate storage. Use snapshots for back up and as templates to " "launch new servers. You can store registered images in Object Storage or in " "other locations. For example, you can store images in simple file systems or" " external web servers." msgstr "" #: ./doc/install-guide/section_glance-install.xml16(para) msgid "" "This procedure assumes you set the appropriate environment variables to your" " credentials as described in ." msgstr "" #: ./doc/install-guide/section_glance-install.xml22(para) msgid "Install the Image Service on the controller node:" msgstr "" #: ./doc/install-guide/section_glance-install.xml29(para) msgid "" "Respond to prompts for database " "management, [keystone_authtoken] " "settings, RabbitMQ " "credentials and API " "endpoint registration. You must also select the caching type:" msgstr "" #: ./doc/install-guide/section_glance-install.xml45(para) msgid "" "The Image Service stores information about images in a database. The " "examples in this guide use the MySQL database that is used by other " "OpenStack services." msgstr "" #: ./doc/install-guide/section_glance-install.xml48(para) msgid "" "Configure the location of the database. The Image Service provides the " "glance-api and glance-registry services, each with its own " "configuration file. You must update both configuration files throughout this" " section. Replace GLANCE_DBPASS with your Image " "Service database password." msgstr "" #: ./doc/install-guide/section_glance-install.xml57(replaceable) #: ./doc/install-guide/section_glance-install.xml59(replaceable) #: ./doc/install-guide/section_glance-install.xml77(replaceable) #: ./doc/install-guide/section_glance-install.xml91(replaceable) #: ./doc/install-guide/section_glance-install.xml93(replaceable) msgid "GLANCE_DBPASS" msgstr "" #: ./doc/install-guide/section_glance-install.xml60(para) msgid "" "Edit /etc/glance/glance-api.conf and " "/etc/glance/glance-registry.conf and change the " "[DEFAULT] section." msgstr "" #: ./doc/install-guide/section_glance-install.xml74(para) msgid "" "Use the command to create the Image Service database and " "tables and a glance database user:" msgstr "" #: ./doc/install-guide/section_glance-install.xml80(para) msgid "" "By default, the Ubuntu packages create an SQLite database. Delete the " "glance.sqlite file created in the " "/var/lib/glance/ directory so that it does not get used" " by mistake." msgstr "" #: ./doc/install-guide/section_glance-install.xml86(para) msgid "" "Use the password you created to log in as root and create a " "glance database user:" msgstr "" #: ./doc/install-guide/section_glance-install.xml96(para) msgid "Create the database tables for the Image Service:" msgstr "" #: ./doc/install-guide/section_glance-install.xml100(para) msgid "" "Create a glance user that the Image Service can use to " "authenticate with the Identity Service. Choose a password and specify an " "email address for the glance user. Use the " "service tenant and give the user the " "admin role." msgstr "" #: ./doc/install-guide/section_glance-install.xml106(replaceable) #: ./doc/install-guide/section_glance-install.xml120(replaceable) #: ./doc/install-guide/section_glance-install.xml127(replaceable) #: ./doc/install-guide/section_glance-install.xml163(replaceable) msgid "GLANCE_PASS" msgstr "" #: ./doc/install-guide/section_glance-install.xml107(replaceable) msgid "glance@example.com" msgstr "" #: ./doc/install-guide/section_glance-install.xml111(para) msgid "Add the credentials to the Image Service configuration files:" msgstr "" #: ./doc/install-guide/section_glance-install.xml128(para) msgid "" "Edit /etc/glance/glance-api.conf and " "/etc/glance/glance-registry.conf and change the " "[keystone_authtoken] section." msgstr "" #: ./doc/install-guide/section_glance-install.xml144(para) msgid "" "Add the credentials to the /etc/glance/glance-api-" "paste.ini and /etc/glance/glance-registry-" "paste.ini files." msgstr "" #: ./doc/install-guide/section_glance-install.xml148(para) msgid "" "On CentOS, the package installation does not create these files created " "correctly. Copy the files to the correct location:" msgstr "" #: ./doc/install-guide/section_glance-install.xml155(para) msgid "" "Edit each file to set the following options in the " "[filter:authtoken] section and leave any other existing " "option as it is." msgstr "" #: ./doc/install-guide/section_glance-install.xml167(para) msgid "" "Register the Image Service with the Identity Service so that other OpenStack" " services can locate it. Register the service and create the endpoint:" msgstr "" #: ./doc/install-guide/section_glance-install.xml174(para) msgid "" "Use the id property returned for the service to create " "the endpoint:" msgstr "" #: ./doc/install-guide/section_glance-install.xml183(para) msgid "" "Restart the glance service with " "its new settings." msgstr "" #: ./doc/install-guide/section_glance-install.xml189(para) msgid "" "Start the glance-api and " "glance-registry services and " "configure them to start when the system boots:" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml30(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-common_keep_admin_pass.png'; " "md5=01af4867c16e458306b8abd78a1fccc9" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml39(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_used_for_remote_db.png'; md5=c6ec966bbfdee18ad87456cf4d44a56f" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml78(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-common_1_configure-with-" "dbconfig-yes-no.png'; md5=4e9d7bce27cc6c7bd68ce8622c80b60f" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml87(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-common_2_db-types.png'; " "md5=a77beb7e13b487cf79716c2140f258c2" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml96(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_3_connection_method.png'; md5=6cc592e5dd5ea404ad7aad98b37a71f6" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml105(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_4_mysql_root_password.png'; md5=873ec338742e37305583e9e692bcfdc6" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml114(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_5_mysql_app_password.png'; md5=3651970770d05892f21d1b5741afbee6" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml123(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_6_mysql_app_password_confirm.png'; " "md5=060cc90aaf6f6fd5cea718064829c1b1" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml6(title) msgid "Configure the database with dbconfig-common" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml7(para) msgid "" "The dbconfig-common package provides a standard Debian " "interface that enables you to configure Debian database parameters. It " "includes localized prompts for many languages and it supports the OpenStack " "database back ends: SQLite, MySQL, and PostgreSQL." msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml12(para) msgid "" "By default, the dbconfig-common package configures the " "OpenStack services to use SQLite3. So if you use debconf " "in non-interactive mode and without pre-seeding, the OpenStack services that" " you install use SQLite3." msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml17(para) msgid "" "By default, dbconfig-common does not provide access to " "database servers over a network. If you want the dbconfig-" "common package to prompt for remote database servers that are " "accessed over a network and not through a UNIX socket file, reconfigure it, " "as follows:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml23(para) msgid "" "These screens appear when you re-configure the dbconfig-" "common package:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml43(para) msgid "" "Unlike other debconf prompts, you cannot pre-seed the " "responses for the dbconfig-common prompts by using " ". Instead, you must create a file in /etc" "/dbconfig-common. For example, you might create a keystone " "configuration file for dbconfig-common that is located in" " /etc/dbconfig-common/keystone.conf, as follows:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml66(para) msgid "After you create this file, run this command:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml68(para) msgid "" "The Identity Service is installed with MySQL as the database back end, " "keystonedb as database name, and the localhost socket " "file." msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml71(para) msgid "The cinder-common package displays these screens:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml127(para) msgid "" "To access a MySQL server remotely, you must make it accessible as root from " "a remote server. To do so, run the openstack-proxy-node " "package command:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml131(para) msgid "" "Alternatively, if you do not want to install this package, run this script " "to enable remote root access:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml154(para) msgid "You must enable remote access before you install OpenStack services." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml87(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_1_admin_token.png'; " "md5=29a51caaf09c3d6e3f0fda73c256a17a" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml112(None) msgid "" "@@image: 'figures/debconf-" "screenshots/keystone_2_register_admin_tenant_yes_no.png'; " "md5=25c9a90b1df2d979aae6ce9975c7285b" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml121(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_3_admin_user_name.png'; " "md5=173cf7ed13252df1425109be588b2ad6" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml130(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_4_admin_user_email.png'; " "md5=b7f0d34350ccc0aa9ae4e766b7ac80c1" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml139(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_5_admin_user_pass.png'; " "md5=e6b32d8d80af90f07a66abc8fb256c84" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml148(None) msgid "" "@@image: 'figures/debconf-" "screenshots/keystone_6_admin_user_pass_confirm.png'; " "md5=1fbf9223e4923c93030d53278d1771cc" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml162(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_7_register_endpoint.png'; " "md5=d24d84133bfee936267e79631a2666e6" msgstr "" #: ./doc/install-guide/section_keystone-install.xml6(title) msgid "Install the Identity Service" msgstr "" #: ./doc/install-guide/section_keystone-install.xml9(para) msgid "" "Install the OpenStack Identity Service on the controller node, together with" " python-keystoneclient (which is a dependency):" msgstr "" #: ./doc/install-guide/section_keystone-install.xml17(para) msgid "" "Answer to the debconf and " "dbconfig-common questions for " "setting-up the database." msgstr "" #: ./doc/install-guide/section_keystone-install.xml23(para) msgid "" "The Identity Service uses a database to store information. Specify the " "location of the database in the configuration file. In this guide, we use a " "MySQL database on the controller node with the username " "keystone. Replace " "KEYSTONE_DBPASS with a " "suitable password for the database user." msgstr "" #: ./doc/install-guide/section_keystone-install.xml30(replaceable) #: ./doc/install-guide/section_keystone-install.xml50(replaceable) #: ./doc/install-guide/section_keystone-install.xml65(replaceable) #: ./doc/install-guide/section_keystone-install.xml67(replaceable) msgid "KEYSTONE_DBPASS" msgstr "" #: ./doc/install-guide/section_keystone-install.xml31(para) msgid "" "Edit /etc/keystone/keystone.conf and change the " "[sql] section." msgstr "" #: ./doc/install-guide/section_keystone-install.xml44(para) msgid "" "Use the command to create the database and tables, as well " "as a database user called keystone to connect to the " "database. Replace " "KEYSTONE_DBPASS with the same " "password used in the previous step." msgstr "" #: ./doc/install-guide/section_keystone-install.xml53(para) msgid "" "By default, the Ubuntu packages create an SQLite database. Delete the " "keystone.db file created in the " "/var/lib/keystone/ directory so that it does not get " "used by mistake." msgstr "" #: ./doc/install-guide/section_keystone-install.xml59(para) msgid "" "Use the password that you set previously to log in as root. Create a " "keystone database user:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml70(para) msgid "Create the database tables for the Identity Service:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml75(para) msgid "" "Define an authorization token to use as a shared secret between the Identity" " Service and other OpenStack services. Respond to the " "debconf prompt with the value in the " "admin_token directive in the keystone.conf" " file. Use the command to generate this password." msgstr "" #: ./doc/install-guide/section_keystone-install.xml91(para) msgid "" "Later, you can verify that the " "/etc/keystone/keystone.conf file contains the password " "you have set using debconf: " msgstr "" #: ./doc/install-guide/section_keystone-install.xml99(para) msgid "" "If you omit a password (for example by pressing Enter at the " "debconf prompt, or installing Keystone using the Debconf " "non-interactive mode) the package generates a random " "ADMIN_TOKEN value." msgstr "" #: ./doc/install-guide/section_keystone-install.xml105(para) msgid "Respond to the prompts to create an administrative tenant:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml154(para) msgid "" "If this is the first time you have installed the Identity Service, register " "the Identity Service in the service catalog:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml168(para) msgid "" "Define an authorization token to use as a shared secret between the Identity" " Service and other OpenStack services. Use to generate a " "random token and store it in the configuration file:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml177(para) msgid "For SUSE Linux Enterprise use instead as first command:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml180(para) msgid "" "Edit /etc/keystone/keystone.conf and change the " "[DEFAULT] section, replacing ADMIN_TOKEN with the results" " of the command." msgstr "" #: ./doc/install-guide/section_keystone-install.xml190(para) msgid "" "By default, Keystone uses PKI tokens. Create the signing keys and " "certificates:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml201(para) msgid "Restart the Identity Service:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml205(para) msgid "" "Start the Identity Service and enable it to start when the system boots:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-post-install.xml6(title) msgid "Object Storage post-installation tasks" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-post-install.xml10(title) msgid "Add a proxy server" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-post-install.xml11(para) msgid "" "For reliability, you add proxy servers. You can set up an additional proxy " "node the same way that you set up the first proxy node but with additional " "configuration steps." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-post-install.xml15(para) msgid "" "After you have more than two proxies, you must load balance them; your " "storage endpoint (what clients use to connect to your storage) also changes." " You can select from different strategies for load balancing. For example, " "you could use round-robin DNS, or a software or hardware load balancer (like" " pound) in front of the two proxies, and point your storage URL to the load " "balancer." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-post-install.xml24(para) msgid "" "Configure an initial proxy node. Then, complete these steps to add proxy " "servers." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-post-install.xml28(para) msgid "" "Update the list of memcache servers in the /etc/swift/proxy-" "server.conf file for added proxy servers. If you run multiple " "memcache servers, use this pattern for the multiple IP:port listings in each" " proxy server configuration file:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-post-install.xml42(para) msgid "" "Copy ring information to all nodes, including new proxy nodes. Also, ensure " "that the ring information gets to all storage nodes." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-post-install.xml49(para) msgid "" "After you sync all nodes, make sure that the admin has keys in " "/etc/swift and the ownership for the ring file is " "correct." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml6(title) msgid "Verify the installation" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml7(para) msgid "" "You can run these commands from the proxy server or any server that has " "access to the Identity Service." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml11(para) msgid "" "Make sure that your credentials are set up correctly in the " "openrc.sh file and source it:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml15(para) msgid "Run the following command:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml27(para) msgid "" "Run the following commands to upload files to a container. " "Create the test.txt and test2.txt " "test files locally if needed." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml34(para) msgid "" "Run the following command to download all files from the " "myfiles container:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml6(title) msgid "Install and configure the proxy node" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml7(para) msgid "" "The proxy server takes each request and looks up locations for the account, " "container, or object and routes the requests correctly. The proxy server " "also handles API requests. You enable account management by configuring it " "in the proxy-server.conf file." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml13(para) msgid "" "The Object Storage processes run under a separate user and group, set by " "configuration options, and referred to as swift:swiftopenstack-swift:openstack-swift. The default " "user is swift, which may not" " exist on your system.openstack-" "swift." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml25(para) msgid "Install swift-proxy service:" msgstr "Installez le service Swift-proxy:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml31(para) msgid "Create self-signed cert for SSL:" msgstr "Créer le certificat CERT auto-signé pour SSL:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml36(para) msgid "" "Modify memcached to listen on the default interfaces on a local, non-public " "network. Edit this line in the /etc/memcached.conf " "file:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml40(para) msgid "Change it to:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml44(para) msgid "Restart the memcached server:" msgstr "Relance du serveur memcached" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml48(para) msgid "" "RHEL/CentOS/Fedora only: To set up Object Storage to authenticate tokens, " "set the Identity Service Admin token in the swift proxy file with the " " command." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml58(para) msgid "" "Ubuntu only: Because the distribution packages do not include a copy of the " "keystoneauth middleware, ensure that the proxy server includes them:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml68(para) msgid "Create /etc/swift/proxy-server.conf:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml72(phrase) msgid "user = swift" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml73(phrase) msgid "user = openstack-swift" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml120(para) msgid "" "If you run multiple memcache servers, put the multiple IP:port listings in " "the [filter:cache] section of the proxy-server.conf " "file:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml125(para) msgid "Only the proxy server uses memcache." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml129(para) msgid "" "Create the signing_dir and set its " "permissions accordingly." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml138(para) msgid "" "Create the account, container, and object rings. The builder command creates" " a builder file with a few parameters. The parameter with the value of 18 " "represents 2 ^ 18th, the value that the partition is sized to. Set this " "“partition power” value based on the total amount of storage you expect your" " entire ring to use. The value 3 represents the number of replicas of each " "object, with the last value being the number of hours to restrict moving a " "partition more than once." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml154(para) msgid "For every storage device on each node add entries to each ring:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml160(para) msgid "" "You must omit the optional STORAGE_REPLICATION_NET_IP" " parameter if you do not want to use dedicated network for replication." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml164(para) msgid "" "For example, if a storage node has a partition in Zone 1 on IP 10.0.0.1, the" " storage node has address 10.0.1.1 from replication network. The mount point" " of this partition is /srv/node/sdb1, and the path in " "rsyncd.conf is /srv/node/, the DEVICE would be sdb1 and" " the commands are:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml175(para) msgid "" "If you assume five zones with one node for each zone, start ZONE at 1. For " "each additional node, increment ZONE by 1." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml181(para) msgid "Verify the ring contents for each ring:" msgstr "Vérifiez le contenu de l'anneau pour chaque anneau:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml187(para) msgid "Rebalance the rings:" msgstr "Réequilibrer les anneaux:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml192(para) msgid "Rebalancing rings can take some time." msgstr "Réequilibrer les anneaux peut prendre du temps:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml196(para) msgid "" "Copy the account.ring.gz, " "container.ring.gz, and " "object.ring.gz files to each of the Proxy and Storage " "nodes in /etc/swift." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml202(para) msgid "Make sure the swift user owns all configuration files:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml207(para) msgid "Start Proxy services:" msgstr "Lancer les services de Proxy:" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml6(title) msgid "Plan networking for Object Storage" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml7(para) msgid "" "For both conserving network resources and ensuring that network " "administrators understand the needs for networks and public IP addresses for" " providing access to the APIs and storage network as necessary, this section" " offers recommendations and required minimum sizes. Throughput of at least " "1000 Mbps is suggested." msgstr "Cette section propose des recommandations et des valeurs minimales requises afin, à la fois, de préserver les ressources réseau et de s'assurer que les administrateurs réseaux comprennent les besoins en réseaux et adresses IP publiques pour pouvoir fournir les accès aux services des API et du Stockage selon les besoins. Un débit d'au moins 1000 Mbps est suggéré." #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml15(para) msgid "A mandatory public network. Connects to the Proxy server." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml19(para) msgid "" "A mandatory storage network. Not accessible from outside the cluster. All " "nodes connect to this network." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml23(para) msgid "" "An optional replication network. Not accessible from outside the cluster. " "Dedicated to replication traffic among Storage nodes. Must be configured in " "the Ring." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml13(para) msgid "This guide describes the following networks:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml28(para) msgid "" "By default, all of the OpenStack Object Storage services, as well as the " "rsync daemon on the Storage nodes, are configured to listen on their " "STORAGE_LOCAL_NET IP addresses." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml32(para) msgid "" "If you configure a replication network in the Ring, the Account, Container " "and Object servers listen on both the STORAGE_LOCAL_NET " "and STORAGE_REPLICATION_NET IP addresses. The rsync " "daemon only listens on the STORAGE_REPLICATION_NET IP " "address." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml40(term) msgid "Public Network (Publicly routable IP range)" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml42(para) msgid "" "Provides public IP accessibility to the API endpoints within the cloud " "infrastructure." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml44(para) msgid "Minimum size: one IP address for each proxy server." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml49(term) msgid "Storage Network (RFC1918 IP Range, not publicly routable)" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml52(para) msgid "" "Manages all inter-server communications within the Object Storage " "infrastructure." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml54(para) msgid "Minimum size: one IP address for each storage node and proxy server." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml56(para) msgid "" "Recommended size: as above, with room for expansion to the largest your " "cluster size. For example, 255 or CIDR /24." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml62(term) msgid "Replication Network (RFC1918 IP Range, not publicly routable)" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml65(para) msgid "" "Manages replication-related communications among storage servers within the " "Object Storage infrastructure." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml67(para) msgid "Recommended size: as for STORAGE_LOCAL_NET." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml45(None) msgid "" "@@image: '../figures/swift_install_arch.png'; " "md5=c6519fb969c1184afa22e024de9bd2a6" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml6(title) msgid "Example Object Storage installation architecture" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml9(para) msgid "" "node. A host machine that runs one or more OpenStack Object Storage " "services." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml13(para) msgid "Proxy node. Runs Proxy services." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml16(para) msgid "Storage node. Runs Account, Container, and Object services." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml20(para) msgid "" "Ring. A set of mappings between OpenStack Object Storage data to physical " "devices." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml24(para) msgid "" "Replica. A copy of an object. By default, three copies are maintained in the" " cluster." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml28(para) msgid "" "Zone. A logically separate section of the cluster, related to independent " "failure characteristics." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml32(para) msgid "" "To increase reliability and performance, you can add additional proxy " "servers." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml34(para) msgid "" "This document describes each storage node as a separate zone in the ring. At" " a minimum, five zones are recommended. A zone is a group of nodes that is " "as isolated as possible from other nodes (separate servers, network, power, " "even geography). The ring guarantees that every replica is stored in a " "separate zone. This diagram shows one possible configuration for a minimal " "installation:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml6(title) msgid "Install Object Storage" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml7(para) msgid "" "Though you can install OpenStack Object Storage for development or testing " "purposes on one server, a multiple-server installation enables the high " "availability and redundancy you want in a production distributed object " "storage system." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml12(para) msgid "" "To perform a single-node installation for development purposes from source " "code, use the Swift All In One instructions (Ubuntu) or DevStack (multiple " "distros). See http://swift.openstack.org/development_saio.html" " for manual instructions or http://devstack.org for all-in-one " "including authentication with the Identity Service (keystone)." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml24(para) msgid "" "Have a copy of the operating system installation media available if you are " "installing on a new server." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml26(para) msgid "" "These steps assume you have set up repositories for packages for your " "operating system as shown in OpenStack " "Packages." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml30(para) msgid "" "This document demonstrates how to install a cluster by using the following " "types of nodes:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml34(para) msgid "" "One proxy node which runs the swift-proxy-server processes. The proxy server" " proxies requests to the appropriate storage nodes." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml39(para) msgid "" "Five storage nodes that run the swift-account-server, swift-container-" "server, and swift-object-server processes which control storage of the " "account databases, the container databases, as well as the actual stored " "objects." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml48(para) msgid "" "Fewer storage nodes can be used initially, but a minimum of five is " "recommended for a production cluster." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml54(title) msgid "General installation steps" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml57(para) msgid "Install core Swift files and openSSH." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml68(para) msgid "" "Create a swift user that the Object Storage Service can " "use to authenticate with the Identity Service. Choose a password and specify" " an email address for the swift user. Use the " "service tenant and give the user the " "admin role." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml75(replaceable) msgid "SWIFT_PASS" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml76(replaceable) msgid "swift@example.com" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml80(para) msgid "Create a service entry for the Object Storage Service:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml97(para) msgid "" "Specify an API endpoint for the Object Storage Service by using the returned" " service ID. When you specify an endpoint, you provide URLs for the public " "API, internal API, and admin API. In this guide, the " "controller host name is used." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml119(para) msgid "Create and populate configuration directories on all nodes:" msgstr "Créer et alimenter les répertoires de configuration sur l'ensemble des nœuds:" #: ./doc/install-guide/object-storage/section_object-storage-install.xml127(para) msgid "Create /etc/swift/swift.conf on all nodes:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml134(para) msgid "" "The suffix value in /etc/swift/swift.conf should be set" " to some random string of text to be used as a salt when hashing to " "determine mappings in the ring. This file should be the same on every node " "in the cluster!" msgstr "La valeur suffix dans /etc/swift/swift.conf doit être une chaîne de caractères aléatoire qui sera utilisée comme une clé de hachage pour déterminer le plan dans l'anneau. Ce fichier doit être le même sur chaque nœud du cluster!" #: ./doc/install-guide/object-storage/section_object-storage-install.xml141(para) msgid "" "Next, set up your storage nodes and proxy node. This example uses the " "Identity Service for the common authentication piece." msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml7(title) msgid "Start services on the storage nodes" msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml8(para) msgid "" "Now that the ring files are on each storage node, you can start the " "services. On each storage node, run the following commands:" msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml36(para) msgid "To start all swift services at once, run the command:" msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml38(para) msgid "To know more about swift-init command, run:" msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml45(replaceable) msgid "service" msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml44(para) msgid "On Fedora, you might need to use ." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml6(title) msgid "Install and configure storage nodes" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml8(para) msgid "" "Object Storage works on any file system that supports Extended Attributes " "(XATTRS). XFS shows the best overall performance for the swift use case " "after considerable testing and benchmarking at Rackspace. It is also the " "only file system that has been thoroughly tested. See the OpenStack Configuration " "Reference for additional recommendations." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml20(para) msgid "Install Storage node packages:" msgstr "Installer les paquets des nœuds de stockage:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml29(para) msgid "" "For each device on the node that you want to use for storage, set up the XFS" " volume (/dev/sdb is used as an example). Use a single " "partition per drive. For example, in a server with 12 disks you may use one " "or two disks for the operating system which should not be touched in this " "step. The other 10 or 11 disks should be partitioned with a single " "partition, then formatted in XFS." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml52(para) msgid "Create /etc/rsyncd.conf:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml101(para) msgid "" "(Optional) If you want to separate rsync and replication traffic to " "replication network, set STORAGE_REPLICATION_NET_IP " "instead of STORAGE_LOCAL_NET_IP:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml109(para) msgid "Edit the following line in /etc/default/rsync:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml114(para) msgid "Start rsync daemon:" msgstr "Lancer le démon rsync:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml117(para) msgid "" "The rsync daemon requires no authentication, so run it on a local, private " "network." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml122(para) msgid "Create the swift recon cache directory and set its permissions." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml8(para) msgid "" "Hardware: OpenStack Object Storage is " "designed to run on commodity hardware." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml11(para) msgid "" "When you install only the Object Storage and Identity Service, you cannot " "use the dashboard unless you also install Compute and the Image Service." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml16(caption) msgid "Hardware recommendations" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml23(td) msgid "Server" msgstr "Serveur" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml24(td) msgid "Recommended Hardware" msgstr "Configuration matériel recommandée" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml30(para) msgid "Object Storage object servers" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml32(para) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml61(para) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml71(para) msgid "Processor: dual quad core" msgstr "Processeur : Double Quad-coeur" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml33(para) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml62(para) msgid "Memory: 8 or 12 GB RAM" msgstr "Mémoire : 8 ou 12 Go de RAM" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml34(para) msgid "Disk space: optimized for cost per GB" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml35(para) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml63(para) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml72(para) msgid "Network: one 1 GB Network Interface Card (NIC)" msgstr "Réseau: une carte d'interface réseau 1 GBit/s" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml37(para) msgid "" "The amount of disk space depends on how much you can fit into the rack " "efficiently. You want to optimize these for best cost per GB while still " "getting industry-standard failure rates. At Rackspace, our storage servers " "are currently running fairly generic 4U servers with 24 2T SATA drives and 8" " cores of processing power. RAID on the storage drives is not required and " "not recommended. Swift's disk usage pattern is the worst case possible for " "RAID, and performance degrades very quickly using RAID 5 or 6." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml49(para) msgid "" "As an example, Rackspace runs Cloud Files storage servers with 24 2T SATA " "drives and 8 cores of processing power. Most services support either a " "worker or concurrency value in the settings. This allows the services to " "make effective use of the cores available." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml58(para) msgid "Object Storage container/account servers" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml65(para) msgid "Optimized for IOPS due to tracking with SQLite databases." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml69(para) msgid "Object Storage proxy server" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml74(para) msgid "" "Higher network throughput offers better performance for supporting many API " "requests." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml77(para) msgid "" "Optimize your proxy servers for best CPU performance. The Proxy Services are" " more CPU and network I/O intensive. If you are using 10 GB networking to " "the proxy, or are terminating SSL traffic at the proxy, greater CPU power is" " required." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml86(para) msgid "" "Operating system: OpenStack Object " "Storage currently runs on Ubuntu, RHEL, CentOS, Fedora, openSUSE, or SLES." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml89(para) msgid "" "Networking: 1Gpbs or 10 Gbps is suggested" " internally. For OpenStack Object Storage, an external network should " "connect the outside world to the proxy servers, and the storage network is " "intended to be isolated on a private network or multiple private networks." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml94(para) msgid "" "Database: For OpenStack Object Storage, a" " SQLite database is part of the OpenStack Object Storage container and " "account management process." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml98(para) msgid "" "Permissions: You can install OpenStack " "Object Storage either as root or as a user with sudo permissions if you " "configure the sudoers file to enable all the permissions." msgstr "" #. Put one translator per line, in the form of NAME , YEAR1, YEAR2 #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml0(None) msgid "translator-credits" msgstr "Olivier Buisson , 2012 | Cloudwatt Team , 2013"