Description of Cisco configuration options

Configuration option = Default value	Description
[CISCO]
model_class = neutron.plugins.cisco.models.virt_phy_sw_v2.VirtualPhysicalSwitchModelV2	(StrOpt) Model Class
nexus_l3_enable = False	(BoolOpt) Enable L3 support on the Nexus switches
provider_vlan_auto_create = True	(BoolOpt) Provider VLANs are automatically created as needed on the Nexus switch
provider_vlan_auto_trunk = True	(BoolOpt) Provider VLANs are automatically trunked as needed on the ports of the Nexus switch
provider_vlan_name_prefix = p-	(StrOpt) VLAN Name prefix for provider vlans
svi_round_robin = False	(BoolOpt) Distribute SVI interfaces over all switches
vlan_name_prefix = q-	(StrOpt) VLAN Name prefix
[CISCO_N1K]
bridge_mappings =	(StrOpt) N1K Bridge Mappings
default_network_profile = default_network_profile	(StrOpt) N1K default network profile
default_policy_profile = service_profile	(StrOpt) N1K default policy profile
enable_tunneling = True	(BoolOpt) N1K Enable Tunneling
http_pool_size = 4	(IntOpt) Number of threads to use to make HTTP requests
http_timeout = 15	(IntOpt) N1K http timeout duration in seconds
integration_bridge = br-int	(StrOpt) N1K Integration Bridge
network_node_policy_profile = dhcp_pp	(StrOpt) N1K policy profile for network node
network_vlan_ranges = vlan:1:4095	(StrOpt) N1K Network VLAN Ranges
poll_duration = 60	(IntOpt) N1K Policy profile polling duration in seconds
restrict_network_profiles = True	(BoolOpt) Restrict tenants from accessing network profiles belonging to some other tenant
restrict_policy_profiles = False	(BoolOpt) Restrict the visibility of policy profiles to the tenants
tenant_network_type = local	(StrOpt) N1K Tenant Network Type
tunnel_bridge = br-tun	(StrOpt) N1K Tunnel Bridge
vxlan_id_ranges = 5000:10000	(StrOpt) N1K VXLAN ID Ranges
[cfg_agent]
device_connection_timeout = 30	(IntOpt) Time in seconds for connecting to a hosting device
hosting_device_dead_timeout = 300	(IntOpt) The time in seconds until a backlogged hosting device is presumed dead. This value should be set up high enough to recover from a period of connectivity loss or high load when the device may not be responding.
[general]
backlog_processing_interval = 10	(IntOpt) Time in seconds between renewed scheduling attempts of non-scheduled routers.
cfg_agent_down_time = 60	(IntOpt) Seconds of no status update until a cfg agent is considered down.
default_security_group = mgmt_sec_grp	(StrOpt) Default security group applied on management port. Default value is mgmt_sec_grp.
ensure_nova_running = True	(BoolOpt) Ensure that Nova is running before attempting to create any VM.
l3_admin_tenant = L3AdminTenant	(StrOpt) Name of the L3 admin tenant.
management_network = osn_mgmt_nw	(StrOpt) Name of management network for device configuration. Default value is osn_mgmt_nw
service_vm_config_path = /opt/stack/data/neutron/cisco/config_drive	(StrOpt) Path to config drive files for service VM instances.
templates_path = /opt/stack/data/neutron/cisco/templates	(StrOpt) Path to templates for hosting devices.
[hosting_devices]
csr1kv_booting_time = 420	(IntOpt) Booting time in seconds before a CSR1kv becomes operational.
csr1kv_cfgagent_router_driver = networking_cisco.plugins.cisco.cfg_agent.device_drivers.csr1kv.csr1kv_routing_driver.CSR1kvRoutingDriver	(StrOpt) Config agent driver for CSR1kv.
csr1kv_device_driver = networking_cisco.plugins.cisco.l3.hosting_device_drivers.csr1kv_hd_driver.CSR1kvHostingDeviceDriver	(StrOpt) Hosting device driver for CSR1kv.
csr1kv_flavor = 621	(StrOpt) UUID of Nova flavor for CSR1kv.
csr1kv_image = csr1kv_openstack_img	(StrOpt) Name of Glance image for CSR1kv.
csr1kv_password = cisco	(StrOpt) Password to use for CSR1kv configurations.
csr1kv_plugging_driver = networking_cisco.plugins.cisco.l3.plugging_drivers.n1kv_trunking_driver.N1kvTrunkingPlugDriver	(StrOpt) Plugging driver for CSR1kv.
csr1kv_username = stack	(StrOpt) Username to use for CSR1kv configurations.