# # Translators: # jimidar , 2013-2014 # Savitojs , 2014 # dhingra007 , 2014 msgid "" msgstr "" "Project-Id-Version: OpenStack Manuals\n" "POT-Creation-Date: 2014-05-01 05:30+0000\n" "PO-Revision-Date: 2014-04-30 23:00+0000\n" "Last-Translator: openstackjenkins \n" "Language-Team: Panjabi (Punjabi) (India) (http://www.transifex.com/projects/p/openstack-manuals-i18n/language/pa_IN/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: pa_IN\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: ./doc/install-guide/section_keystone-users.xml5(title) msgid "Define users, tenants, and roles" msgstr "" #: ./doc/install-guide/section_keystone-users.xml7(para) msgid "" "After you install the Identity Service, set up users, tenants, and roles to authenticate against. These are used " "to allow access to services and endpoints, described in the next section." msgstr "" #: ./doc/install-guide/section_keystone-users.xml26(replaceable) #: ./doc/install-guide/section_keystone-users.xml29(replaceable) #: ./doc/install-guide/section_trove-install.xml136(replaceable) msgid "ADMIN_TOKEN" msgstr "" #: ./doc/install-guide/section_keystone-users.xml15(para) msgid "" "Typically, you would indicate a user and password to authenticate with the " "Identity Service. At this point, however, you have not created any users, so" " you have to use the authorization token created in an earlier step, see " " for further details. You can pass this " "with the option to the command " "or set the OS_SERVICE_TOKEN environment variable. Set " "OS_SERVICE_TOKEN, as well as " "OS_SERVICE_ENDPOINT to specify where the Identity Service is " "running. Replace with your authorization token." msgstr "" #: ./doc/install-guide/section_keystone-users.xml33(title) msgid "Create an administrative user" msgstr "" #: ./doc/install-guide/section_keystone-users.xml34(para) msgid "" "Follow these steps to create an administrative user, role, and tenant. You " "will use this account for administrative interaction with the OpenStack " "cloud." msgstr "" #: ./doc/install-guide/section_keystone-users.xml39(para) msgid "" "By default, the Identity Service creates a special " "_member_ role. The OpenStack dashboard automatically " "grants access to users with this role. You will give the " "admin user access to this role in addition to the " "admin role." msgstr "" #: ./doc/install-guide/section_keystone-users.xml47(para) msgid "" "Any role that you create must map to roles specified in the " "policy.json file included with each OpenStack service. " "The default policy file for most services grants administrative access to " "the admin role." msgstr "" #: ./doc/install-guide/section_keystone-users.xml55(para) msgid "Create the admin user:" msgstr "" #: ./doc/install-guide/section_keystone-users.xml58(replaceable) #: ./doc/install-guide/section_trove-install.xml135(replaceable) #: ./doc/install-guide/section_trove-install.xml164(replaceable) #: ./doc/install-guide/section_trove-install.xml210(replaceable) #: ./doc/install-guide/section_keystone-verify.xml25(replaceable) #: ./doc/install-guide/section_keystone-verify.xml35(replaceable) #: ./doc/install-guide/section_keystone-verify.xml49(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml408(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml376(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml485(replaceable) msgid "ADMIN_PASS" msgstr "ADMIN_PASS" #: ./doc/install-guide/section_keystone-users.xml58(replaceable) msgid "ADMIN_EMAIL" msgstr "" #: ./doc/install-guide/section_keystone-users.xml59(para) msgid "" "Replace ADMIN_PASS with a secure password and " "replace ADMIN_EMAIL with an email address to " "associate with the account." msgstr "" #: ./doc/install-guide/section_keystone-users.xml66(para) msgid "Create the admin role:" msgstr "" #: ./doc/install-guide/section_keystone-users.xml72(para) msgid "Create the admin tenant:" msgstr "" #: ./doc/install-guide/section_keystone-users.xml78(para) msgid "" "You must now link the admin user, " "admin role, and admin tenant together " "using the option:" msgstr "" #: ./doc/install-guide/section_keystone-users.xml86(para) msgid "" "Link the admin user, _member_ role, " "and admin tenant:" msgstr "" #: ./doc/install-guide/section_keystone-users.xml94(title) msgid "Create a normal user" msgstr "" #: ./doc/install-guide/section_keystone-users.xml95(para) msgid "" "Follow these steps to create a normal user and tenant, and link them to the " "special _member_ role. You will use this account for " "daily non-administrative interaction with the OpenStack cloud. You can also " "repeat this procedure to create additional cloud users with different " "usernames and passwords. Skip the tenant creation step when creating these " "users." msgstr "" #: ./doc/install-guide/section_keystone-users.xml104(para) msgid "Create the demo user:" msgstr "" #: ./doc/install-guide/section_keystone-users.xml107(replaceable) #: ./doc/install-guide/ch_clients.xml40(replaceable) msgid "DEMO_PASS" msgstr "" #: ./doc/install-guide/section_keystone-users.xml107(replaceable) msgid "DEMO_EMAIL" msgstr "" #: ./doc/install-guide/section_keystone-users.xml108(para) msgid "" "Replace DEMO_PASS with a secure password and " "replace DEMO_EMAIL with an email address to " "associate with the account." msgstr "" #: ./doc/install-guide/section_keystone-users.xml115(para) msgid "Create the demo tenant:" msgstr "" #: ./doc/install-guide/section_keystone-users.xml120(para) msgid "Do not repeat this step when adding additional users." msgstr "" #: ./doc/install-guide/section_keystone-users.xml126(para) msgid "" "Link the demo user, _member_ role, and" " demo tenant:" msgstr "" #: ./doc/install-guide/section_keystone-users.xml134(title) msgid "Create a service tenant" msgstr "" #: ./doc/install-guide/section_keystone-users.xml135(para) msgid "" "OpenStack services also require a username, tenant, and role to access other" " OpenStack services. In a basic installation, OpenStack services typically " "share a single tenant named service." msgstr "" #: ./doc/install-guide/section_keystone-users.xml140(para) msgid "" "You will create additional usernames and roles under this tenant as you " "install and configure each service." msgstr "" #: ./doc/install-guide/section_keystone-users.xml145(para) msgid "Create the service tenant:" msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml5(title) msgid "Create initial network" msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml6(para) msgid "" "Before launching your first instance, you must create the necessary virtual " "network infrastructure to which the instance will connect. This network " "typically provides internet access from instances. You " "can enable internet access to individual instances " "using a floating IP address and suitable " "security group rules. The admin " "tenant owns this network because it provides external network access for " "multiple tenants." msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml15(para) msgid "" "This network shares the same subnet associated with " "the physical network connected to the external " "interface on the compute node. You should specify an " "exclusive slice of this subnet to prevent interference with other devices on" " the external network." msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml21(para) #: ./doc/install-guide/section_neutron-initial-networks.xml42(para) #: ./doc/install-guide/section_neutron-initial-networks.xml129(para) msgid "Perform these commands on the controller node." msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml24(title) msgid "To create the network" msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml26(para) #: ./doc/install-guide/section_neutron-initial-networks.xml47(para) msgid "Source the admin tenant credentials:" msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml30(para) #: ./doc/install-guide/section_neutron-initial-networks.xml51(para) #: ./doc/install-guide/section_neutron-initial-networks.xml138(para) msgid "Create the network:" msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml31(para) msgid "" "Replace NETWORK_CIDR with the subnet associated " "with the physical network." msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml34(replaceable) msgid "NETWORK_CIDR" msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml35(para) msgid "" "For example, using an exclusive slice of 203.0.113.0/24 " "with IP address range 203.0.113.24 to " "203.0.113.32:" msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml42(para) #: ./doc/install-guide/section_launch-instance-nova.xml26(para) #: ./doc/install-guide/section_launch-instance-neutron.xml26(para) #: ./doc/install-guide/section_launch-instance-neutron.xml245(para) msgid "This command provides no output." msgstr "" #: ./doc/install-guide/section_nova-networking-initial-network.xml46(para) msgid "Verify creation of the network:" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml29(None) msgid "" "@@image: 'figures/debconf-screenshots/api-endpoint_1_register_endpoint.png';" " md5=d534be231be4f725820a1050fbf44231" msgstr "@@image: 'figures/debconf-screenshots/api-endpoint_1_register_endpoint.png'; md5=d534be231be4f725820a1050fbf44231" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml40(None) msgid "" "@@image: 'figures/debconf-screenshots/api-" "endpoint_2_keystone_server_ip.png'; md5=d2c5a5b82dd433fcf9cde6f5ac34c30e" msgstr "@@image: 'figures/debconf-screenshots/api-endpoint_2_keystone_server_ip.png'; md5=d2c5a5b82dd433fcf9cde6f5ac34c30e" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml54(None) msgid "" "@@image: 'figures/debconf-screenshots/api-" "endpoint_3_keystone_authtoken.png'; md5=1f3b05ebe671f64d672ac70d246e4f39" msgstr "@@image: 'figures/debconf-screenshots/api-endpoint_3_keystone_authtoken.png'; md5=1f3b05ebe671f64d672ac70d246e4f39" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml69(None) msgid "" "@@image: 'figures/debconf-screenshots/api-" "endpoint_4_service_endpoint_ip_address.png'; " "md5=6853f0ae2ef8d5fddb22c466d465de15" msgstr "@@image: 'figures/debconf-screenshots/api-endpoint_4_service_endpoint_ip_address.png'; md5=6853f0ae2ef8d5fddb22c466d465de15" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-api-endpoints.xml81(None) msgid "" "@@image: 'figures/debconf-screenshots/api-endpoint_5_region_name.png'; " "md5=a6bce0acf5a1cb85f161290f0cf30733" msgstr "@@image: 'figures/debconf-screenshots/api-endpoint_5_region_name.png'; md5=a6bce0acf5a1cb85f161290f0cf30733" #: ./doc/install-guide/section_debconf-api-endpoints.xml6(title) msgid "Register API endpoints" msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml7(para) msgid "" "All Debian packages for API services, except the heat-api" " package, register the service in the Identity Service catalog. This feature" " is helpful because API endpoints are difficult to remember." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml12(para) msgid "" "The heat-common package and not the heat-" "api package configures the Orchestration service." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml16(para) msgid "" "When you install a package for an API service, you are prompted to register " "that service. However, after you install or upgrade the package for an API " "service, Debian immediately removes your response to this prompt from the " "debconf database. Consequently, you are prompted to re-" "register the service with the Identity Service. If you already registered " "the API service, respond no when you upgrade." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml33(para) msgid "This screen registers packages in the Identity Service catalog:" msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml44(para) msgid "" "You are prompted for the Identity Service admin_token " "value. The Identity Service uses this value to register the API service. " "When you set up the keystone package, this value is " "configured automatically." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml58(para) msgid "" "This screen configures the IP addresses for the service. The configuration " "script automatically detects the IP address used by the interface that is " "connected to the default route (/sbin/route and " "/sbin/ip)." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml62(para) msgid "" "Unless you have a unique set up for your network, press " "ENTER." msgstr "" #: ./doc/install-guide/section_debconf-api-endpoints.xml73(para) msgid "" "This screen configures the region name for the service. For example, us-east-coast or europe-paris." msgstr "" #: ./doc/install-guide/ch_glance.xml6(title) msgid "Configure the Image Service" msgstr "ਚਿੱਤਰ ਸੇਵਾ ਸੰਰਚਿਤ ਕਰੋ" #: ./doc/install-guide/ch_glance.xml7(para) msgid "" "The OpenStack Image Service enables users to discover, register, and " "retrieve virtual machine images. Also known as the glance project, the Image" " Service offers a REST API that " "enables you to query virtual machine image metadata and retrieve an actual " "image. You can store virtual machine images made available through the Image" " Service in a variety of locations from simple file systems to object-" "storage systems like OpenStack Object Storage." msgstr "" #: ./doc/install-guide/ch_glance.xml16(para) msgid "" "For simplicity, this guide configures the Image Service to use the " "file back end. This means that images uploaded to the " "Image Service are stored in a directory on the same system that hosts the " "service. By default, this directory is " "/var/lib/glance/images/." msgstr "" #: ./doc/install-guide/ch_glance.xml21(para) msgid "" "Before you proceed, ensure that the system has sufficient space available in" " this directory to store virtual machine images and snapshots. At an " "absolute minimum, several gigabytes of space should be available for use by " "the Image Service in a proof of concept deployment. To see requirements for " "other back ends, see Configuration Reference." msgstr "" #: ./doc/install-guide/ch_cinder.xml6(title) msgid "Add the Block Storage service" msgstr "" #: ./doc/install-guide/ch_cinder.xml7(para) msgid "" "The OpenStack Block Storage service works through the interaction of a " "series of daemon processes named cinder-* that reside persistently on the host " "machine or machines. You can run the binaries from a single node or across " "multiple nodes. You can also run them on the same node as other OpenStack " "services. The following sections introduce Block Storage service components " "and concepts and show you how to configure and install the Block Storage " "service." msgstr "" #: ./doc/install-guide/ch_cinder.xml20(title) #: ./doc/install-guide/ch_swift.xml30(title) #: ./doc/install-guide/ch_networking.xml37(title) #: ./doc/install-guide/ch_horizon.xml38(title) #: ./doc/install-guide/ch_ceilometer.xml18(title) #: ./doc/install-guide/ch_heat.xml14(title) msgid "Next steps" msgstr "" #: ./doc/install-guide/ch_cinder.xml21(para) msgid "" "Your OpenStack environment now includes Block Storage. You can launch an instance or add more services to your " "environment in the following chapters." msgstr "" #: ./doc/install-guide/section_basics-passwords.xml6(title) msgid "Passwords" msgstr "ਪਛਾਣ-ਸ਼ਬਦ" #: ./doc/install-guide/section_basics-passwords.xml7(para) msgid "" "The various OpenStack services and the required software like the database " "and the messaging server have to be password protected. You use these " "passwords when configuring a service and then again to access the service. " "You have to choose a password while configuring the service and later " "remember to use the same password when accessing it. Optionally, you can " "generate random passwords with the pwgen program." " Or, to create passwords one at a time, use the output of this command " "repeatedly: " msgstr "" #: ./doc/install-guide/section_basics-passwords.xml17(para) msgid "" "This guide uses the convention that " "SERVICE_PASS is the password " "to access the service SERVICE and " "SERVICE_DBPASS is the database" " password used by the service SERVICE to access the database." msgstr "" #: ./doc/install-guide/section_basics-passwords.xml24(para) msgid "" "The complete list of passwords you need to define in this guide are:
Passwords
Password " "nameDescription
Database password " "(no variable used)Root password for the database
RABBIT_PASSPassword" " of user guest of " "RabbitMQ
KEYSTONE_DBPASSDatabase" " password of Identity " "service
DEMO_PASSPassword" " of user " "demo
ADMIN_PASSPassword" " of user " "admin
GLANCE_DBPASSDatabase" " password for Image " "Service
GLANCE_PASSPassword" " of Image Service user " "glance
NOVA_DBPASSDatabase" " password for Compute " "service
NOVA_PASSPassword" " of Compute service user " "nova
DASH_DBPASSDatabase" " password for the " "dashboard
CINDER_DBPASSDatabase" " password for the Block Storage " "service
CINDER_PASSPassword" " of Block Storage service user " "cinder
NEUTRON_DBPASSDatabase" " password for the Networking " "service
NEUTRON_PASSPassword" " of Networking service user " "neutron
HEAT_DBPASSDatabase" " password for the Orchestration " "service
HEAT_PASSPassword" " of Orchestration service user " "heat
CEILOMETER_DBPASSDatabase" " password for the Telemetry " "service
CEILOMETER_PASSPassword" " of Telemetry service user " "ceilometer
TROVE_DBPASSDatabase" " password of Database " "service
TROVE_PASSPassword" " of Database Service user trove
" msgstr "" #: ./doc/install-guide/section_basics-database.xml6(title) msgid "Database" msgstr "ਡਾਟਾਬੇਸ" #: ./doc/install-guide/section_basics-database.xml7(para) msgid "" "Most OpenStack services require a database to store information. These " "examples use a MySQL database that runs on the controller node. You must " "install the MySQL database on the controller node. You must install the " "MySQL Python library on any additional nodes that access MySQL." msgstr "" #: ./doc/install-guide/section_basics-database.xml13(para) msgid "" "Most OpenStack services require a database to store information. This guide " "uses a MySQL database on SUSE Linux Enterprise Server and a compatible " "database on openSUSE running on the controller node. This compatible " "database for openSUSE is MariaDB. You must install the MariaDB database on " "the controller node. You must install the MySQL Python library on any " "additional nodes that access MySQL or MariaDB." msgstr "" #: ./doc/install-guide/section_basics-database.xml22(title) msgid "Controller setup" msgstr "" #: ./doc/install-guide/section_basics-database.xml23(para) msgid "" "For SUSE Linux Enterprise Server: On the " "controller node, install the MySQL client and server packages, and the " "Python library." msgstr "" #: ./doc/install-guide/section_basics-database.xml27(para) msgid "" "For openSUSE: On the controller node, install the MariaDB client and " "database server packages, and the MySQL Python library." msgstr "" #: ./doc/install-guide/section_basics-database.xml34(para) msgid "" "When you install the server package, you are prompted for the root password " "for the database. Choose a strong password and remember it." msgstr "" #: ./doc/install-guide/section_basics-database.xml38(para) msgid "The MySQL configuration requires some changes to work with OpenStack." msgstr "" #: ./doc/install-guide/section_basics-database.xml42(para) msgid "Edit the /etc/mysql/my.cnf file:" msgstr "" #: ./doc/install-guide/section_basics-database.xml44(para) msgid "Edit the /etc/my.cnf file:" msgstr "" #: ./doc/install-guide/section_basics-database.xml48(para) msgid "" "Under the [mysqld] section, set the bind-" "address key to the management IP address of the controller node to" " enable access by other nodes via the management network:" msgstr "" #: ./doc/install-guide/section_basics-database.xml57(para) msgid "" "Under the [mysqld] section, set the following keys to " "enable InnoDB, UTF-8 character set, and UTF-8 collation by default:" msgstr "" #: ./doc/install-guide/section_basics-database.xml70(para) msgid "Restart the MySQL service to apply the changes:" msgstr "" #: ./doc/install-guide/section_basics-database.xml73(para) msgid "" "Start the MySQLMariaDB or MySQL database server and set it to" " start automatically when the system boots:" msgstr "" #: ./doc/install-guide/section_basics-database.xml82(para) msgid "" "Finally, you should set a root password for your MySQLMariaDB" " or MySQL database. The OpenStack programs that set up databases " "and tables prompt you for this password if it is set." msgstr "" #: ./doc/install-guide/section_basics-database.xml88(para) msgid "" "You must delete the anonymous users that are created when the database is " "first started. Otherwise, database connection problems occur when you follow" " the instructions in this guide. To do this, use the " "command. Note that if fails you might need to use " " first:" msgstr "" #: ./doc/install-guide/section_basics-database.xml97(para) msgid "" "If you have not already set " "a root database password, press ENTER when you are prompted" " for the password. This command presents a number of options for " "you to secure your database installation. Respond to all " "prompts unless you have a good reason to do otherwise." msgstr "" #: ./doc/install-guide/section_basics-database.xml106(title) msgid "Node setup" msgstr "" #: ./doc/install-guide/section_basics-database.xml107(para) msgid "" "On all nodes other than the controller node, install the MySQL Python " "library:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml6(title) msgid "OpenStack packages" msgstr "OpenStack ਪੰਡਾਂ (ਪੈਕੇਜ)" #: ./doc/install-guide/section_basics-packages.xml7(para) msgid "" "Distributions might release OpenStack packages as part of their distribution" " or through other methods because the OpenStack and distribution release " "times are independent of each other." msgstr "" #: ./doc/install-guide/section_basics-packages.xml11(para) msgid "" "This section describes the configuration you must complete after you " "configure machines to install the latest OpenStack packages." msgstr "" #: ./doc/install-guide/section_basics-packages.xml14(para) msgid "" "The examples in this guide use the OpenStack packages from the RDO " "repository. These packages work on Red Hat Enterprise Linux 6, compatible " "versions of CentOS, and Fedora 20. To enable the RDO repository, download " "and install the rdo-release-icehouse package:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml21(para) msgid "" "The EPEL package includes GPG keys for package signing and repository " "information. This should only be installed on Red Hat Enterprise Linux and " "CentOS, not Fedora. Install the latest epel-release " "package (see http://download.fedoraproject.org/pub/epel/6/x86_64/repoview" "/epel-release.html). For example:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml30(para) msgid "" "The openstack-utils package contains utility programs " "that make installation and configuration easier. These programs are used " "throughout this guide. Install openstack-utils. This " "verifies that you can access the RDO repository:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml37(para) msgid "" "Use the Open Build Service repositories for Icehouse " "based on your openSUSE or SUSE Linux Enterprise Server version." msgstr "" #: ./doc/install-guide/section_basics-packages.xml40(para) msgid "For openSUSE 13.1 use:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml42(para) msgid "If you use SUSE Linux Enterprise Server 11 SP3, use:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml45(para) msgid "" "The openstack-utils package contains utility programs " "that make installation and configuration easier. These programs are used " "throughout this guide. Install openstack-utils. This " "verifies that you can access the Open Build Service repository:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml52(para) msgid "" "The openstack-config program in the openstack-utils package uses crudini " "to manipulate configuration files. However, " "crudini version 0.3 does not support multi valued" " options. See https://bugs.launchpad.net/openstack-" "manuals/+bug/1269271. As a work around, you must manually set any " "multi valued options or the new value overwrites the previous value instead " "of creating a new option." msgstr "" #: ./doc/install-guide/section_basics-packages.xml64(para) msgid "" "The openstack-selinux package includes the policy files " "that are required to configure SELinux during OpenStack installation on RHEL" " and CentOS. This step is not required during OpenStack installation on " "Fedora. Install openstack-selinux:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml71(para) msgid "Upgrade your system packages:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml75(para) msgid "" "If the upgrade included a new kernel package, reboot the system to ensure " "the new kernel is running:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml79(title) msgid "To use the Ubuntu Cloud Archive for Icehouse" msgstr "" #: ./doc/install-guide/section_basics-packages.xml80(para) msgid "" "The Ubuntu " "Cloud Archive is a special repository that allows you to install " "newer releases of OpenStack on the stable supported version of Ubuntu." msgstr "" #: ./doc/install-guide/section_basics-packages.xml85(para) msgid "" "Icehouse is in the main repository for 14.04 - this step is not required." msgstr "" #: ./doc/install-guide/section_basics-packages.xml88(para) msgid "" "Install the Ubuntu Cloud Archive for Icehouse: " "" msgstr "" #: ./doc/install-guide/section_basics-packages.xml94(para) msgid "Update the package database and upgrade your system:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml99(para) msgid "" "If you intend to use OpenStack Networking with Ubuntu 12.04, you should " "install a backported Linux kernel to improve the stability of your system. " "This installation is not needed if you intend to use the legacy networking " "service." msgstr "" #: ./doc/install-guide/section_basics-packages.xml103(para) msgid "Install the Ubuntu 13.10 backported kernel:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml107(para) msgid "Reboot the system for all changes to take effect:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml112(title) msgid "To use the Debian Wheezy backports archive for Icehouse" msgstr "" #: ./doc/install-guide/section_basics-packages.xml114(para) msgid "" "The Icehouse release is available only in Debian Sid " "(otherwise called Unstable). However, the Debian maintainers of OpenStack " "also maintain a non-official Debian repository for OpenStack containing " "Wheezy backports." msgstr "" #: ./doc/install-guide/section_basics-packages.xml120(para) msgid "Install the Debian Wheezy backport repository Icehouse:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml125(para) msgid "Install the Debian Wheezy OpenStack repository for Icehouse:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml130(para) msgid "Update the repository database and install the key:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml134(para) msgid "" "Update the package database, upgrade your system, and reboot for all changes" " to take effect:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml140(para) msgid "" "Numerous archive.gplhost.com mirrors are available around the world. All are" " available with both FTP and HTTP protocols (you should use the closest " "mirror). The list of mirrors is available at http://archive.gplhost.com/readme.mirrors." msgstr "" #: ./doc/install-guide/section_basics-packages.xml147(title) msgid "Manually install python-argparse" msgstr "" #: ./doc/install-guide/section_basics-packages.xml148(para) msgid "" "The Debian OpenStack packages are maintained on Debian Sid (also known as " "Debian Unstable) - the current development version. Backported packages run " "correctly on Debian Wheezy with one caveat:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml152(para) msgid "" "All OpenStack packages are written in Python. Wheezy uses Python 2.6 and " "2.7, with Python 2.6 as the default interpreter; Sid has only Python 2.7. " "There is one packaging change between these two. In Python 2.6, you " "installed the python-argparse package separately. In " "Python 2.7, this package is installed by default. Unfortunately, in Python " "2.7, this package does not include Provides: python-argparse " "directive." msgstr "" #: ./doc/install-guide/section_basics-packages.xml160(para) msgid "" "Because the packages are maintained in Sid where the Provides: python-" "argparse directive causes an error, and the Debian OpenStack " "maintainer wants to maintain one version of the OpenStack packages, you must" " manually install the python-argparse on each OpenStack " "system that runs Debian Wheezy before you install the other OpenStack " "packages. Use the following command to install the package:" msgstr "" #: ./doc/install-guide/section_basics-packages.xml169(para) msgid "This caveat applies to most OpenStack packages in Wheezy." msgstr "" #: ./doc/install-guide/section_basics-networking.xml6(title) msgid "Networking" msgstr "ਨੈੱਟਵਰਕਿੰਗ" #: ./doc/install-guide/section_basics-networking.xml7(para) msgid "" "After installing the operating system on each node for the architecture that" " you choose to deploy, you must configure the network interfaces. We " "recommend that you disable any automated network management tools and " "manually edit the appropriate configuration files for your distribution. For" " more information on how to configure networking on your distribution, see " "the documentation.documentation.documentation.SLES" " 11 or openSUSE documentation." msgstr "" #: ./doc/install-guide/section_basics-networking.xml30(title) msgid "" "To disable NetworkManager and " "enable the network service:" msgstr "" #: ./doc/install-guide/section_basics-networking.xml41(title) msgid "To disable NetworkManager:" msgstr "" #: ./doc/install-guide/section_basics-networking.xml43(para) msgid "Use the YaST network module:" msgstr "" #: ./doc/install-guide/section_basics-networking.xml45(para) msgid "" "For more information, see the SLES" " or the " "openSUSE documentation." msgstr "" #: ./doc/install-guide/section_basics-networking.xml53(para) msgid "" "RHEL and derivatives including CentOS and Scientific Linux enable a " "restrictive firewall by default. During this " "installation, certain steps will fail unless you alter or disable the " "firewall. For further information about securing your installation, refer to" " the OpenStack Security " "Guide." msgstr "" #: ./doc/install-guide/section_basics-networking.xml60(para) msgid "" "On Fedora, firewalld replaces iptables" " as the default firewall system. While you can use " "firewalld successfully, this guide references " "iptables for compatibility with other distributions." msgstr "" #: ./doc/install-guide/section_basics-networking.xml66(title) msgid "" "To disable firewalld and enable " "iptables:" msgstr "" #: ./doc/install-guide/section_basics-networking.xml75(para) msgid "" "Proceed to network configuration for the example OpenStack Networking (neutron) or legacy networking (nova-network) " "architecture." msgstr "" #: ./doc/install-guide/section_cinder-verify.xml5(title) msgid "Verify the Block Storage installation" msgstr "" #: ./doc/install-guide/section_cinder-verify.xml6(para) msgid "" "To verify that the Block Storage is installed and configured properly, " "create a new volume." msgstr "" #: ./doc/install-guide/section_cinder-verify.xml8(para) msgid "" "For more information about how to manage volumes, see the OpenStack User " "Guide." msgstr "" #: ./doc/install-guide/section_cinder-verify.xml13(para) msgid "Source the demo-openrc.sh file:" msgstr "" #: ./doc/install-guide/section_cinder-verify.xml18(para) msgid "Use the command to create a new volume:" msgstr "" #: ./doc/install-guide/section_cinder-verify.xml40(para) msgid "" "Make sure that the volume has been correctly created with the " " command:" msgstr "" #: ./doc/install-guide/section_cinder-verify.xml48(para) msgid "" "If the status value is not available, the volume creation" " failed. Check the log files in the /var/log/cinder/ " "directory on the controller and volume nodes to get information about the " "failure." msgstr "" #: ./doc/install-guide/section_glance-verify.xml5(title) msgid "Verify the Image Service installation" msgstr "" #: ./doc/install-guide/section_glance-verify.xml6(para) msgid "" "To test the Image Service installation, download at least one virtual " "machine image that is known to work with OpenStack. For example, CirrOS is a" " small test image that is often used for testing OpenStack deployments " "(CirrOS downloads). " "This walk through uses the 64-bit CirrOS QCOW2 image." msgstr "" #: ./doc/install-guide/section_glance-verify.xml13(para) msgid "" "For more information about how to download and build images, see OpenStack Virtual Machine Image " "Guide. For information about how to manage images, see " "the OpenStack User " "Guide." msgstr "" #: ./doc/install-guide/section_glance-verify.xml24(para) msgid "" "Download the image into a dedicated directory using or " ":" msgstr "" #: ./doc/install-guide/section_glance-verify.xml32(para) msgid "Upload the image to the Image Service:" msgstr "ਚਿੱਤਰ ਸੇਵਾ ਉੱਪਰ ਚਿੱਤਰ ਅੱਪਲੋਡ ਕਰੋ:" #: ./doc/install-guide/section_glance-verify.xml33(replaceable) #: ./doc/install-guide/section_glance-verify.xml38(replaceable) msgid "IMAGELABEL" msgstr "" #: ./doc/install-guide/section_glance-verify.xml33(replaceable) #: ./doc/install-guide/section_glance-verify.xml45(replaceable) msgid "FILEFORMAT" msgstr "" #: ./doc/install-guide/section_glance-verify.xml34(replaceable) #: ./doc/install-guide/section_glance-verify.xml65(replaceable) msgid "CONTAINERFORMAT" msgstr "" #: ./doc/install-guide/section_glance-verify.xml34(replaceable) #: ./doc/install-guide/section_glance-verify.xml86(replaceable) msgid "ACCESSVALUE" msgstr "" #: ./doc/install-guide/section_glance-verify.xml34(replaceable) #: ./doc/install-guide/section_glance-verify.xml101(replaceable) msgid "IMAGEFILE" msgstr "" #: ./doc/install-guide/section_glance-verify.xml35(para) msgid "Where:" msgstr "ਕਿੱਥੇ:" #: ./doc/install-guide/section_glance-verify.xml40(para) msgid "Arbitrary label. The name by which users refer to the image." msgstr "" #: ./doc/install-guide/section_glance-verify.xml47(para) msgid "" "Specifies the format of the image file. Valid formats include " "qcow2, raw, vhd, " "vmdk, vdi, iso, " "aki, ari, and ami." msgstr "ਤਸਵੀਰ ਫਾਈਲ ਦਾ ਫਾਰਮੈਟ ਦਰਸਾਉੰਦਾ ਹੈ। ਢੁਕਵੇੰ ਫਾਰਮੈਟਾਂ ਵਿੱਚ ਸ਼ਾਮਿਲ ਹਨ qcow2, raw, vhd, vmdk, vdi, iso, aki, ari, ਅਤੇ ami।" #: ./doc/install-guide/section_glance-verify.xml58(para) msgid "" "You can verify the format using the command: " "" msgstr "ਤੁਸੀਂ ਕਮਾੰਡ: ਵਰਤ ਕੇ ਫਾਰਮੈਟ ਦੀ ਪੜਤਾਲ ਕਰ ਸਕਦੇ ਹੋ" #: ./doc/install-guide/section_glance-verify.xml67(para) msgid "" "Specifies the container format. Valid formats include: " "bare, ovf, aki, " "ari and ami." msgstr "" #: ./doc/install-guide/section_glance-verify.xml73(para) msgid "" "Specify bare to indicate that the image file is not in a " "file format that contains metadata about the virtual machine. Although this " "field is currently required, it is not actually used by any of the OpenStack" " services and has no effect on system behavior. Because the value is not " "used anywhere, it is safe to always specify bare as the " "container format." msgstr "" #: ./doc/install-guide/section_glance-verify.xml90(para) msgid "true - All users can view and use the image." msgstr "" #: ./doc/install-guide/section_glance-verify.xml94(para) msgid "false - Only administrators can view and use the image." msgstr "" #: ./doc/install-guide/section_glance-verify.xml88(para) msgid "Specifies image access: " msgstr "ਤਸਵੀਰ ਅਸੈੱਸ ਦਰਸਾਉਂਦਾ ਹੈ: " #: ./doc/install-guide/section_glance-verify.xml103(para) msgid "Specifies the name of your downloaded image file." msgstr "ਤੁਹਾਡੀ ਡਾਊਨਲੋਡ ਕੀਤੀ ਹੋਈ ਤਸਵੀਰ ਫਾਈਲ ਦਾ ਨਾਮ ਦਰਸਾਉਂਦਾ ਹੈ।" #: ./doc/install-guide/section_glance-verify.xml108(para) #: ./doc/install-guide/section_glance-verify.xml150(para) msgid "For example:" msgstr "ਉਦਾਹਰਣ ਲਈ:" #: ./doc/install-guide/section_glance-verify.xml133(para) msgid "" "Because the returned image ID is generated dynamically, your deployment " "generates a different ID than the one shown in this example." msgstr "" #: ./doc/install-guide/section_glance-verify.xml139(para) msgid "Confirm that the image was uploaded and display its attributes:" msgstr "" #: ./doc/install-guide/section_glance-verify.xml149(para) msgid "" "Alternatively, the upload to the Image Service can be done without having to" " use local disk space to store the file, by use of the --copy-" "from parameter." msgstr "" #: ./doc/install-guide/ch_clients.xml6(title) msgid "Install and configure the OpenStack clients" msgstr "" #: ./doc/install-guide/ch_clients.xml7(para) msgid "" "The following sections contain information about working with the OpenStack " "clients. Recall: in the previous section, you used the " "client." msgstr "" #: ./doc/install-guide/ch_clients.xml10(para) msgid "" "You must install the client tools to complete the rest of the installation." msgstr "" #: ./doc/install-guide/ch_clients.xml12(para) msgid "" "Configure the clients on your desktop rather than on the server so that you " "have a similar experience to your users." msgstr "" #: ./doc/install-guide/ch_clients.xml20(title) msgid "Create openrc.sh files" msgstr "" #: ./doc/install-guide/ch_clients.xml22(para) msgid "" "As explained in , use the credentials from " " and create the following " "PROJECT-openrc.sh files:" msgstr "" #: ./doc/install-guide/ch_clients.xml32(para) msgid "admin-openrc.sh for the administrative user" msgstr "" #: ./doc/install-guide/ch_clients.xml42(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml102(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml111(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml118(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml145(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml148(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml190(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml198(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml202(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml217(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml224(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml238(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml239(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml240(replaceable) #: ./doc/install-guide/section_trove-install.xml66(replaceable) #: ./doc/install-guide/section_trove-install.xml67(replaceable) #: ./doc/install-guide/section_trove-install.xml68(replaceable) #: ./doc/install-guide/section_trove-install.xml69(replaceable) #: ./doc/install-guide/section_trove-install.xml70(replaceable) #: ./doc/install-guide/section_trove-install.xml71(replaceable) #: ./doc/install-guide/section_trove-install.xml84(replaceable) #: ./doc/install-guide/section_trove-install.xml86(replaceable) #: ./doc/install-guide/section_trove-install.xml88(replaceable) #: ./doc/install-guide/section_trove-install.xml111(replaceable) #: ./doc/install-guide/section_trove-install.xml113(replaceable) #: ./doc/install-guide/section_trove-install.xml115(replaceable) #: ./doc/install-guide/section_trove-install.xml131(replaceable) #: ./doc/install-guide/section_trove-install.xml207(replaceable) #: ./doc/install-guide/section_trove-install.xml212(replaceable) #: ./doc/install-guide/section_trove-install.xml233(replaceable) #: ./doc/install-guide/section_trove-install.xml234(replaceable) #: ./doc/install-guide/section_trove-install.xml235(replaceable) #: ./doc/install-guide/section_nova-controller.xml44(replaceable) #: ./doc/install-guide/section_nova-controller.xml59(replaceable) #: ./doc/install-guide/section_nova-controller.xml140(replaceable) #: ./doc/install-guide/section_nova-controller.xml141(replaceable) #: ./doc/install-guide/section_nova-controller.xml160(replaceable) #: ./doc/install-guide/section_nova-controller.xml177(replaceable) #: ./doc/install-guide/section_nova-controller.xml178(replaceable) #: ./doc/install-guide/section_nova-controller.xml179(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml145(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml147(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml181(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml182(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml196(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml207(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml216(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml234(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml244(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml255(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml260(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml51(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml52(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml53(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml89(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml102(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml115(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml117(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml147(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml148(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml176(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml191(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml204(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml212(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml231(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml235(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml352(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml362(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml386(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml391(replaceable) #: ./doc/install-guide/section_keystone-services.xml47(replaceable) #: ./doc/install-guide/section_keystone-services.xml48(replaceable) #: ./doc/install-guide/section_keystone-services.xml49(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml181(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml186(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml194(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml199(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml271(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml276(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml326(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml410(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml116(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml177(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml181(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml185(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml191(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml222(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml226(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml234(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml321(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml325(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml329(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml335(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml377(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml57(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml58(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml59(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml83(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml100(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml102(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml135(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml136(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml163(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml181(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml231(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml241(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml252(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml257(replaceable) #: ./doc/install-guide/section_ceilometer-glance.xml17(replaceable) #: ./doc/install-guide/section_ceilometer-glance.xml23(replaceable) #: ./doc/install-guide/section_basics-networking-nova.xml195(replaceable) #: ./doc/install-guide/section_basics-networking-neutron.xml267(replaceable) #: ./doc/install-guide/section_basics-networking-neutron.xml311(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml99(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml101(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml132(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml133(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml147(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml158(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml167(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml391(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml396(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml401(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml411(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml193(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml212(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml229(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml234(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml284(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml287(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml291(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml301(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml334(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml339(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml348(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml367(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml426(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml451(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml487(replaceable) #: ./doc/install-guide/section_cinder-node.xml113(replaceable) #: ./doc/install-guide/section_cinder-node.xml115(replaceable) #: ./doc/install-guide/section_cinder-node.xml131(replaceable) #: ./doc/install-guide/section_cinder-node.xml132(replaceable) #: ./doc/install-guide/section_cinder-node.xml150(replaceable) #: ./doc/install-guide/section_cinder-node.xml161(replaceable) #: ./doc/install-guide/section_cinder-node.xml170(replaceable) #: ./doc/install-guide/section_cinder-node.xml183(replaceable) #: ./doc/install-guide/section_cinder-node.xml186(replaceable) #: ./doc/install-guide/section_cinder-node.xml202(replaceable) #: ./doc/install-guide/section_cinder-node.xml205(replaceable) #: ./doc/install-guide/section_cinder-controller.xml44(replaceable) #: ./doc/install-guide/section_cinder-controller.xml47(replaceable) #: ./doc/install-guide/section_cinder-controller.xml83(replaceable) #: ./doc/install-guide/section_cinder-controller.xml85(replaceable) #: ./doc/install-guide/section_cinder-controller.xml101(replaceable) #: ./doc/install-guide/section_cinder-controller.xml102(replaceable) #: ./doc/install-guide/section_cinder-controller.xml120(replaceable) #: ./doc/install-guide/section_cinder-controller.xml153(replaceable) #: ./doc/install-guide/section_cinder-controller.xml154(replaceable) #: ./doc/install-guide/section_cinder-controller.xml155(replaceable) #: ./doc/install-guide/section_cinder-controller.xml163(replaceable) #: ./doc/install-guide/section_cinder-controller.xml164(replaceable) #: ./doc/install-guide/section_cinder-controller.xml165(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml67(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml69(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml99(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml100(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml117(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml128(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml143(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml271(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml281(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml302(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml307(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml64(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml66(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml96(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml97(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml114(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml125(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml140(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml296(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml306(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml330(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml335(replaceable) #: ./doc/install-guide/section_heat-install.xml40(replaceable) #: ./doc/install-guide/section_heat-install.xml46(replaceable) #: ./doc/install-guide/section_heat-install.xml92(replaceable) #: ./doc/install-guide/section_heat-install.xml95(replaceable) #: ./doc/install-guide/section_heat-install.xml113(replaceable) #: ./doc/install-guide/section_heat-install.xml116(replaceable) #: ./doc/install-guide/section_heat-install.xml122(replaceable) #: ./doc/install-guide/section_heat-install.xml133(replaceable) #: ./doc/install-guide/section_heat-install.xml134(replaceable) #: ./doc/install-guide/section_heat-install.xml135(replaceable) #: ./doc/install-guide/section_heat-install.xml140(replaceable) #: ./doc/install-guide/section_heat-install.xml141(replaceable) #: ./doc/install-guide/section_heat-install.xml142(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml79(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml85(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml91(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml107(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml122(replaceable) #: ./doc/install-guide/section_nova-compute.xml74(replaceable) #: ./doc/install-guide/section_nova-compute.xml75(replaceable) #: ./doc/install-guide/section_nova-compute.xml93(replaceable) #: ./doc/install-guide/section_nova-compute.xml94(replaceable) #: ./doc/install-guide/section_nova-compute.xml106(replaceable) #: ./doc/install-guide/section_nova-compute.xml131(replaceable) #: ./doc/install-guide/section_nova-compute.xml143(replaceable) #: ./doc/install-guide/section_nova-compute.xml151(replaceable) #: ./doc/install-guide/section_nova-compute.xml154(replaceable) #: ./doc/install-guide/section_glance-install.xml57(replaceable) #: ./doc/install-guide/section_glance-install.xml59(replaceable) #: ./doc/install-guide/section_glance-install.xml67(replaceable) #: ./doc/install-guide/section_glance-install.xml76(replaceable) #: ./doc/install-guide/section_glance-install.xml91(replaceable) #: ./doc/install-guide/section_glance-install.xml104(replaceable) #: ./doc/install-guide/section_glance-install.xml149(replaceable) #: ./doc/install-guide/section_glance-install.xml151(replaceable) #: ./doc/install-guide/section_glance-install.xml165(replaceable) #: ./doc/install-guide/section_glance-install.xml167(replaceable) #: ./doc/install-guide/section_glance-install.xml190(replaceable) #: ./doc/install-guide/section_glance-install.xml191(replaceable) #: ./doc/install-guide/section_glance-install.xml215(replaceable) #: ./doc/install-guide/section_glance-install.xml216(replaceable) #: ./doc/install-guide/section_glance-install.xml217(replaceable) #: ./doc/install-guide/section_keystone-install.xml30(replaceable) #: ./doc/install-guide/section_keystone-install.xml38(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml82(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install.xml95(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install.xml96(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install.xml97(replaceable) msgid "controller" msgstr "ਨਿਯੰਤਰਕ" #: ./doc/install-guide/ch_clients.xml37(para) msgid "" "demo-openrc.sh for the normal user: " msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml6(title) msgid "Launch an instance with legacy networking (nova-network)" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml8(title) #: ./doc/install-guide/section_launch-instance-neutron.xml8(title) msgid "To generate a keypair" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml9(para) #: ./doc/install-guide/section_launch-instance-neutron.xml9(para) msgid "" "Most cloud images support public key authentication " "rather than conventional username/password authentication. Before launching " "an instance, you must generate a public/private key pair using " " and add the public key to your OpenStack environment." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml15(para) #: ./doc/install-guide/section_launch-instance-neutron.xml15(para) #: ./doc/install-guide/section_neutron-initial-networks.xml134(para) msgid "Source the demo tenant credentials:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml19(para) #: ./doc/install-guide/section_launch-instance-neutron.xml19(para) msgid "Generate a key pair:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml23(para) #: ./doc/install-guide/section_launch-instance-neutron.xml23(para) msgid "Add the public key to your OpenStack environment:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml30(para) #: ./doc/install-guide/section_launch-instance-neutron.xml30(para) msgid "Verify addition of the public key:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml40(title) #: ./doc/install-guide/section_launch-instance-neutron.xml40(title) msgid "To launch an instance" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml41(para) #: ./doc/install-guide/section_launch-instance-neutron.xml41(para) msgid "" "To launch an instance, you must at least specify the flavor, image name, " "network, security group, key, and instance name." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml44(para) #: ./doc/install-guide/section_launch-instance-neutron.xml44(para) msgid "" "A flavor specifies a virtual resource allocation profile which includes " "processor, memory, and storage." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml46(para) #: ./doc/install-guide/section_launch-instance-neutron.xml46(para) msgid "List available flavors:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml57(para) #: ./doc/install-guide/section_launch-instance-neutron.xml57(para) msgid "Your first instance uses the m1.tiny flavor." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml60(para) #: ./doc/install-guide/section_launch-instance-neutron.xml60(para) msgid "You can also reference a flavor by ID." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml64(para) #: ./doc/install-guide/section_launch-instance-neutron.xml64(para) msgid "List available images:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml71(para) #: ./doc/install-guide/section_launch-instance-neutron.xml71(para) msgid "" "Your first instance uses the cirros-0.3.2-x86_64 image." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml75(para) #: ./doc/install-guide/section_launch-instance-neutron.xml75(para) msgid "List available networks:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml77(para) msgid "" "You must source the admin tenant credentials for this " "step and then source the demo tenant credentials for the " "remaining steps." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml88(para) #: ./doc/install-guide/section_launch-instance-neutron.xml83(para) msgid "" "Your first instance uses the demo-net tenant network. " "However, you must reference this network using the ID instead of the name." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml93(para) #: ./doc/install-guide/section_launch-instance-neutron.xml88(para) msgid "List available security groups:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml100(para) msgid "" "Your first instance uses the default security group. By " "default, this security group implements a firewall that blocks remote access" " to instances. If you would like to permit remote access to your instance, " "launch it and then " "configure remote access." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml108(para) #: ./doc/install-guide/section_launch-instance-neutron.xml103(para) msgid "Launch the instance:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml109(para) #: ./doc/install-guide/section_launch-instance-neutron.xml104(para) msgid "" "Replace DEMO_NET_ID with the ID of the demo-net tenant network." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml111(replaceable) #: ./doc/install-guide/section_launch-instance-neutron.xml106(replaceable) msgid "DEMO_NET_ID" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml112(replaceable) #: ./doc/install-guide/section_launch-instance-nova.xml162(replaceable) #: ./doc/install-guide/section_launch-instance-neutron.xml107(replaceable) #: ./doc/install-guide/section_launch-instance-neutron.xml157(replaceable) msgid "demo-instance1" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml145(para) #: ./doc/install-guide/section_launch-instance-neutron.xml140(para) msgid "Check the status of your instance:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml152(para) #: ./doc/install-guide/section_launch-instance-neutron.xml147(para) msgid "" "The status changes from BUILD to " "ACTIVE when your instance finishes the build process." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml158(title) #: ./doc/install-guide/section_launch-instance-neutron.xml153(title) msgid "To access your instance using a virtual console" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml160(para) #: ./doc/install-guide/section_launch-instance-neutron.xml155(para) msgid "" "Obtain a Virtual Network Computing (VNC) session URL " "for your instance and access it from a web browser:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml169(para) #: ./doc/install-guide/section_launch-instance-neutron.xml164(para) msgid "" "If your web browser runs on a host that cannot resolve the " "controller host name, you can replace " "controller with the IP address of the management " "interface on your controller node." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml174(para) #: ./doc/install-guide/section_launch-instance-neutron.xml169(para) msgid "" "The CirrOS image includes conventional username/password authentication and " "provides these credentials at the login prompt. After logging into CirrOS, " "we recommend that you verify network connectivity using ." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml178(para) msgid "Verify the demo-net network:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml192(title) #: ./doc/install-guide/section_launch-instance-neutron.xml199(title) msgid "To access your instance remotely" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml194(para) #: ./doc/install-guide/section_launch-instance-neutron.xml201(para) msgid "Add rules to the default security group:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml197(para) #: ./doc/install-guide/section_launch-instance-neutron.xml204(para) msgid "Permit ICMP (ping):" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml206(para) #: ./doc/install-guide/section_launch-instance-neutron.xml213(para) msgid "Permit secure shell (SSH) access:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml217(para) #: ./doc/install-guide/section_launch-instance-neutron.xml258(para) msgid "" "Verify network connectivity using from the controller node " "or any host on the external network:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml231(para) #: ./doc/install-guide/section_launch-instance-neutron.xml272(para) msgid "" "Access your instance using SSH from the controller node or any host on the " "external network:" msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml240(para) #: ./doc/install-guide/section_launch-instance-neutron.xml281(para) msgid "" "If your host does not contain the public/private key pair created in an " "earlier step, SSH prompts for the default password associated with the " "cirros user." msgstr "" #: ./doc/install-guide/section_launch-instance-nova.xml246(para) #: ./doc/install-guide/section_launch-instance-neutron.xml287(para) msgid "" "If your instance does not launch or seem to work as you expect, see the " "OpenStack Operations" " Guide for more information or use one of the many other options to seek " "assistance. We want your environment to work!" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-keystone_authtoken.xml30(None) msgid "" "@@image: 'figures/debconf-" "screenshots/service_keystone_authtoken_server_hostname.png'; " "md5=aafd53894e1d960531d4901123952117" msgstr "@@image: 'figures/debconf-screenshots/service_keystone_authtoken_server_hostname.png'; md5=aafd53894e1d960531d4901123952117" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-keystone_authtoken.xml37(None) msgid "" "@@image: 'figures/debconf-" "screenshots/service_keystone_authtoken_admin_tenant_name.png'; " "md5=a935563e4fba9b00040e35cdcfffc732" msgstr "@@image: 'figures/debconf-screenshots/service_keystone_authtoken_admin_tenant_name.png'; md5=a935563e4fba9b00040e35cdcfffc732" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-keystone_authtoken.xml44(None) msgid "" "@@image: 'figures/debconf-" "screenshots/service_keystone_authtoken_tenant_admin_user.png'; " "md5=fe3dc93c591b3e9783d4d05556efcf25" msgstr "@@image: 'figures/debconf-screenshots/service_keystone_authtoken_tenant_admin_user.png'; md5=fe3dc93c591b3e9783d4d05556efcf25" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-keystone_authtoken.xml51(None) msgid "" "@@image: 'figures/debconf-" "screenshots/service_keystone_authtoken_admin_password.png'; " "md5=0c30c80315d5e636dbe93a938fc2822b" msgstr "@@image: 'figures/debconf-screenshots/service_keystone_authtoken_admin_password.png'; md5=0c30c80315d5e636dbe93a938fc2822b" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml6(title) msgid "Services and the [keystone_authtoken]" msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml7(para) msgid "" "Because most OpenStack services must access the Identity Service, you must " "configure the IP address of the keystone server to be able to " "access it. You must also configure the admin_tenant_name, " "admin_user, and admin_password options for each " "service to work." msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml13(para) msgid "Generally, this section looks like this:" msgstr "ਆਮ ਤੌਰ ਤੇ, ਇਹ ਹਿੱਸਾ ਇਸ ਤਰ੍ਹਾਂ ਦਾ ਦਿਖਦਾ ਹੈ:" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml21(para) msgid "" "The debconf system helps users configure the auth_host, " "admin_tenant_name, admin_user and " "admin_password options." msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml25(para) msgid "The following screens show an example Image Service configuration:" msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml55(para) msgid "" "This information is stored in the configuration file for each service. For " "example:" msgstr "" #: ./doc/install-guide/section_debconf-keystone_authtoken.xml63(para) msgid "" "The Debian OpenStack packages offer automation for this, so OpenStack users " "do not have to manually edit the configuration files." msgstr "" #: ./doc/install-guide/ch_swift.xml6(title) msgid "Add Object Storage" msgstr "" #: ./doc/install-guide/ch_swift.xml7(para) msgid "" "The OpenStack Object Storage services work together to provide object " "storage and retrieval through a REST API. For this example architecture, you" " must have already installed the Identity Service, also known as Keystone." msgstr "" #: ./doc/install-guide/ch_swift.xml31(para) msgid "" "Your OpenStack environment now includes Object Storage. You can launch an instance or add more services " "to your environment in the following chapters." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml8(title) msgid "Networking concepts" msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml9(para) msgid "" "OpenStack Networking (neutron) manages all of the networking facets for the " "Virtual Networking Infrastructure (VNI) and the access layer aspects of the " "Physical Networking Infrastructure (PNI) in your OpenStack environment. " "OpenStack Networking allows tenants to create advanced virtual network " "topologies including services such as firewalls, load balancers, and virtual private networks (VPNs)." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml18(para) msgid "" "Networking provides the following object abstractions: networks, subnets, " "and routers. Each has functionality that mimics its physical counterpart: " "networks contain subnets, and routers route traffic between different subnet" " and networks." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml22(para) msgid "" "Any given Networking set up has at least one external network. This network," " unlike the other networks, is not merely a virtually defined network. " "Instead, it represents the view into a slice of the external network that is" " accessible outside the OpenStack installation. IP addresses on the " "Networking external network are accessible by anybody physically on the " "outside network. Because this network merely represents a slice of the " "outside network, DHCP is disabled on this network." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml30(para) msgid "" "In addition to external networks, any Networking set up has one or more " "internal networks. These software-defined networks connect directly to the " "VMs. Only the VMs on any given internal network, or those on subnets " "connected through interfaces to a similar router, can access VMs connected " "to that network directly." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml35(para) msgid "" "For the outside network to access VMs, and vice versa, routers between the " "networks are needed. Each router has one gateway that is connected to a " "network and many interfaces that are connected to subnets. Like a physical " "router, subnets can access machines on other subnets that are connected to " "the same router, and machines can access the outside network through the " "gateway for the router." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml42(para) msgid "" "Additionally, you can allocate IP addresses on external networks to ports on" " the internal network. Whenever something is connected to a subnet, that " "connection is called a port. You can associate external network IP addresses" " with ports to VMs. This way, entities on the outside network can access " "VMs." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml47(para) msgid "" "Networking also supports security " "groups. Security groups enable administrators to define firewall " "rules in groups. A VM can belong to one or more security groups, and " "Networking applies the rules in those security groups to block or unblock " "ports, port ranges, or traffic types for that VM." msgstr "" #: ./doc/install-guide/section_neutron-concepts.xml53(para) msgid "" "Each plug-in that Networking uses has its own concepts. While not vital to " "operating Networking, understanding these concepts can help you set up " "Networking. All Networking installations use a core plug-in and a security " "group plug-in (or just the No-Op security group plug-in). Additionally, " "Firewall-as-a-service (FWaaS) and Load-balancing-as-a-service (LBaaS) plug-" "ins are available." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml10(title) msgid "Install the Telemetry module" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml12(para) msgid "" "Telemetry provides an API service that provides a collector and a range of " "disparate agents. Before you can install these agents on nodes such as the " "compute node, you must use this procedure to install the core components on " "the controller node." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml18(para) msgid "Install the Telemetry service on the controller node:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml30(para) msgid "" "Respond to the prompts for [keystone_authtoken] " "settings, RabbitMQ " "credentials and API " "endpoint registration." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml38(para) msgid "" "The Telemetry service uses a database to store information. Specify the " "location of the database in the configuration file. The examples use a " "MongoDB database on the controller node:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml46(para) msgid "" "By default MongoDB is configured to create several 1 GB files in the " "/var/lib/mongodb/journal/ directory to support database" " journaling." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml51(para) msgid "" "If you need to minimize the space allocated to support database journaling " "then set the configuration key to " "true in the /etc/mongodb.conf " "configuration file. This configuration reduces the size of each journaling " "file to 512 MB." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml59(para) msgid "" "As the files are created the first time the MongoDB service starts you must " "stop the service and remove the files for this change to take effect:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml67(para) msgid "" "For more information on the configuration key " "refer to the MongoDB documentation at ." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml72(para) msgid "" "For instructions detailing the steps to disable database journaling entirely" " refer to ." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml80(para) msgid "" "Configure MongoDB to make it listen on the controller management IP address." " Edit the /etc/mongodb.conf file and modify the " "bind_ip key:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml86(para) msgid "Restart the MongoDB service to apply the configuration change:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml90(para) msgid "" "Start the MongoDB server and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml100(para) msgid "Create the database and a ceilometer database user:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml105(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml111(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml118(replaceable) msgid "CEILOMETER_DBPASS" msgstr "CEILOMETER_DBPASS" #: ./doc/install-guide/section_ceilometer-install.xml109(para) msgid "Configure the Telemetry service to use the database:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml112(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "change the [database] section:" msgstr "/etc/ceilometer/ceilometer.conf ਫਾਈਲ ਸੋਧੋ ਅਤੇ [database] ਹਿੱਸਾ ਬਦਲੋ:" #: ./doc/install-guide/section_ceilometer-install.xml122(para) msgid "" "You must define a secret key that is used as a shared secret among Telemetry" " service nodes. Use to generate a random token and store it" " in the configuration file:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml129(para) msgid "For SUSE Linux Enterprise, run the following command:" msgstr "SUSE Linux Enterprise ਲਈ, ਹੇਠਲੀ ਕਮਾੰਡ ਚਲਾਉ:" #: ./doc/install-guide/section_ceilometer-install.xml133(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "change the [publisher] section. Replace " "CEILOMETER_TOKEN with the results of the " "openssl command:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml140(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml62(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml70(replaceable) msgid "CEILOMETER_TOKEN" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml144(para) #: ./doc/install-guide/section_ceilometer-nova.xml74(para) msgid "Configure the RabbitMQ access:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml146(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml149(replaceable) #: ./doc/install-guide/section_trove-install.xml97(replaceable) #: ./doc/install-guide/section_trove-install.xml117(replaceable) #: ./doc/install-guide/section_trove-install.xml119(replaceable) #: ./doc/install-guide/section_trove-install.xml121(replaceable) #: ./doc/install-guide/section_trove-install.xml208(replaceable) #: ./doc/install-guide/section_nova-controller.xml70(replaceable) #: ./doc/install-guide/section_nova-controller.xml78(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml200(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml209(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml169(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml192(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml182(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml195(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml272(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml327(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml113(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml178(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml189(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml322(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml333(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml155(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml182(replaceable) #: ./doc/install-guide/section_ceilometer-glance.xml18(replaceable) #: ./doc/install-guide/section_ceilometer-glance.xml24(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml151(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml160(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml207(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml230(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml335(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml362(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml427(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml446(replaceable) #: ./doc/install-guide/section_cinder-node.xml153(replaceable) #: ./doc/install-guide/section_cinder-node.xml174(replaceable) #: ./doc/install-guide/section_cinder-controller.xml123(replaceable) #: ./doc/install-guide/section_cinder-controller.xml145(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml121(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml144(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml118(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml141(replaceable) #: ./doc/install-guide/section_basics-queue.xml77(replaceable) #: ./doc/install-guide/section_heat-install.xml93(replaceable) #: ./doc/install-guide/section_heat-install.xml96(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml76(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml80(replaceable) #: ./doc/install-guide/section_nova-compute.xml115(replaceable) #: ./doc/install-guide/section_nova-compute.xml121(replaceable) #: ./doc/install-guide/section_glance-install.xml92(replaceable) #: ./doc/install-guide/section_glance-install.xml106(replaceable) msgid "RABBIT_PASS" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml147(para) #: ./doc/install-guide/section_ceilometer-install.xml160(para) #: ./doc/install-guide/section_ceilometer-nova.xml77(para) #: ./doc/install-guide/section_ceilometer-nova.xml130(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "update the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml153(para) msgid "Configure the collector dispatcher:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml159(para) #: ./doc/install-guide/section_ceilometer-nova.xml129(para) msgid "Configure the log directory." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml167(para) msgid "" "Create a ceilometer user that the Telemetry service uses " "to authenticate with the Identity Service. Use the " "service tenant and give the user the " "admin role:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml171(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml200(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml208(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml220(replaceable) #: ./doc/install-guide/section_ceilometer-install.xml227(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml99(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml105(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml118(replaceable) #: ./doc/install-guide/section_ceilometer-nova.xml125(replaceable) msgid "CEILOMETER_PASS" msgstr "CEILOMETER_PASS" #: ./doc/install-guide/section_ceilometer-install.xml171(replaceable) msgid "ceilometer@example.com" msgstr "ceilometer@example.com" #: ./doc/install-guide/section_ceilometer-install.xml175(para) msgid "" "Configure the Telemetry service to authenticate with the Identity Service." msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml177(para) msgid "" "Set the value to keystone " "in the /etc/ceilometer/ceilometer.conf file:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml187(para) msgid "" "Add the credentials to the configuration files for the Telemetry service:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml209(para) #: ./doc/install-guide/section_ceilometer-nova.xml108(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "change the [keystone_authtoken] section:" msgstr "/etc/ceilometer/ceilometer.conf ਫਾਈਲ ਸੋਧੋ ਅਤੇ [keystone_authtoken] ਹਿੱਸਾ ਬਦਲੋ:" #: ./doc/install-guide/section_ceilometer-install.xml221(para) #: ./doc/install-guide/section_ceilometer-nova.xml119(para) msgid "Also set the [service_credentials] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml230(para) msgid "" "Register the Telemetry service with the Identity Service so that other " "OpenStack services can locate it. Use the command to " "register the service and specify the endpoint:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml243(para) msgid "Restart the services with their new settings:" msgstr "" #: ./doc/install-guide/section_ceilometer-install.xml252(para) msgid "" "Start the openstack-ceilometer-" "api, openstack-ceilometer-agent-centralopenstack-ceilometer-" "central, openstack-ceilometer-" "collector, openstack-ceilometer-alarm-evaluator, and openstack-ceilometer-alarm-" "notifier services and configure them to start when the system " "boots:" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml5(title) msgid "Verify the Telemetry installation" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml6(para) msgid "" "To test the Telemetry installation, download an image from the Image " "Service, and use the command to display usage statistics." msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml11(para) msgid "" "Use the ceilometer meter-list command to test the access " "to Telemetry:" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml22(para) msgid "Download an image from the Image Service:" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml26(para) msgid "" "Call the ceilometer meter-list command again to validate " "that the download has been detected and stored by the Telemetry:" msgstr "" #: ./doc/install-guide/section_ceilometer-verify.xml39(para) msgid "You can now get usage statistics for the various meters:" msgstr "" #: ./doc/install-guide/section_trove-install.xml3(title) msgid "Install the Database service" msgstr "" #: ./doc/install-guide/section_trove-install.xml4(para) msgid "This procedure installs the Database module on the controller node." msgstr "" #: ./doc/install-guide/section_trove-install.xml7(title) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml30(title) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml10(title) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml26(title) #: ./doc/install-guide/section_neutron-ml2-network-node.xml10(title) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml10(title) msgid "Prerequisites" msgstr "" #: ./doc/install-guide/section_trove-install.xml8(para) msgid "" "This chapter assumes that you already have a working OpenStack environment " "with at least the following components installed: Compute, Image Service, " "Identity." msgstr "" #: ./doc/install-guide/section_trove-install.xml13(title) msgid "Ubuntu 14.04 Only" msgstr "" #: ./doc/install-guide/section_trove-install.xml14(para) msgid "" "The Database module is only available under Ubuntu 14.04. Packages are not " "available for 12.04, or via the Ubuntu Cloud Archive." msgstr "" #: ./doc/install-guide/section_trove-install.xml18(para) msgid "To install the Database module on the controller:" msgstr "" #: ./doc/install-guide/section_trove-install.xml21(para) msgid "Install required packages:" msgstr "" #: ./doc/install-guide/section_trove-install.xml29(para) msgid "Prepare OpenStack:" msgstr "" #: ./doc/install-guide/section_trove-install.xml32(para) msgid "Source the admin-openrc.sh file." msgstr "" #: ./doc/install-guide/section_trove-install.xml37(para) msgid "" "Create a trove user that Compute uses to authenticate " "with the Identity service. Use the service tenant and " "give the user the admin role:" msgstr "" #: ./doc/install-guide/section_trove-install.xml42(replaceable) msgid "TROVE_PASS" msgstr "" #: ./doc/install-guide/section_trove-install.xml43(replaceable) msgid "trove@example.com" msgstr "" #: ./doc/install-guide/section_trove-install.xml51(para) msgid "" "Edit the following configuration files, taking the below actions for each " "file:" msgstr "" #: ./doc/install-guide/section_trove-install.xml54(filename) msgid "trove.conf" msgstr "" #: ./doc/install-guide/section_trove-install.xml55(filename) msgid "trove-taskmanager.conf" msgstr "" #: ./doc/install-guide/section_trove-install.xml56(filename) msgid "trove-conductor.conf" msgstr "" #: ./doc/install-guide/section_trove-install.xml60(para) msgid "" "Edit the [DEFAULT] section of each file and set " "appropriate values for the OpenStack service URLs, logging and messaging " "configuration, and SQL connections:" msgstr "" #: ./doc/install-guide/section_trove-install.xml70(literal) msgid "TROVE_DBPASS" msgstr "" #: ./doc/install-guide/section_trove-install.xml75(para) msgid "" "Set these configuration keys to configure the Database module to use the " "Qpid message broker:" msgstr "" #: ./doc/install-guide/section_trove-install.xml92(para) msgid "" "Configure the Database module to use the RabbitMQ message broker by setting " "the rabbit_password in the [DEFAULT] configuration group " "of each file:" msgstr "" #: ./doc/install-guide/section_trove-install.xml102(para) msgid "" "Set these configuration keys to configure the Database module to use the " "RabbitMQ message broker:" msgstr "" #: ./doc/install-guide/section_trove-install.xml127(para) msgid "" "Edit the [filter:authtoken] section of the api-" "paste.ini file so it matches the listing shown below:" msgstr "" #: ./doc/install-guide/section_trove-install.xml141(para) msgid "" "Edit the trove.conf file so it includes appropriate " "values for the default datastore and network label regex as shown below:" msgstr "" #: ./doc/install-guide/section_trove-install.xml154(para) msgid "" "Edit the trove-taskmanager.conf file so it includes the" " appropriate service credentials required to connect to the OpenStack " "Compute service as shown below:" msgstr "" #: ./doc/install-guide/section_trove-install.xml170(para) msgid "Prepare the trove admin database:" msgstr "" #: ./doc/install-guide/section_trove-install.xml178(para) msgid "Prepare the Database service:" msgstr "" #: ./doc/install-guide/section_trove-install.xml181(para) msgid "Initialize the database:" msgstr "" #: ./doc/install-guide/section_trove-install.xml185(para) msgid "" "Create a datastore. You need to create a separate datastore for each type of" " database you want to use, for example, MySQL, MongoDB, Cassandra. This " "example shows you how to create a datastore for a MySQL database:" msgstr "" #: ./doc/install-guide/section_trove-install.xml194(para) msgid "Create a trove image." msgstr "" #: ./doc/install-guide/section_trove-install.xml195(para) msgid "" "Create an image for the type of database you want to use, for example, " "MySQL, MongoDB, Cassandra." msgstr "" #: ./doc/install-guide/section_trove-install.xml197(para) msgid "" "This image must have the trove guest agent installed, and it must have the " "trove-guestagent.conf file configured to connect to " "your OpenStack environment. To correctly configure the trove-" "guestagent.conf file, follow these steps on the guest instance " "you are using to build your image:" msgstr "" #: ./doc/install-guide/section_trove-install.xml206(para) msgid "Add the following lines to trove-guestagent.conf:" msgstr "" #: ./doc/install-guide/section_trove-install.xml218(para) msgid "" "Update the datastore to use the new image, using the " "command." msgstr "" #: ./doc/install-guide/section_trove-install.xml220(para) msgid "This example shows you how to create a MySQL 5.5 datastore:" msgstr "" #: ./doc/install-guide/section_trove-install.xml222(replaceable) msgid "glance_image_ID" msgstr "" #: ./doc/install-guide/section_trove-install.xml226(para) msgid "" "You must register the Database module with the Identity service so that " "other OpenStack services can locate it. Register the service and specify the" " endpoint:" msgstr "" #: ./doc/install-guide/section_trove-install.xml239(para) msgid "" "Start Database services and configure them to start when the system boots:" msgstr "" #: ./doc/install-guide/section_trove-install.xml242(para) msgid "Restart Database services:" msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml5(title) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml8(title) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml8(title) msgid "Configure compute node" msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml6(para) msgid "" "This section covers deployment of a simple flat " "network that provides IP addresses to your instances via " "DHCP. If your environment includes multiple compute " "nodes, the multi-host feature provides redundancy by " "spreading network functions across compute nodes." msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml13(title) msgid "To install legacy networking components" msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml21(title) #: ./doc/install-guide/section_nova-networking-controller-node.xml9(title) msgid "To configure legacy networking" msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml23(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml301(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml345(para) #: ./doc/install-guide/section_ceilometer-glance.xml20(para) #: ./doc/install-guide/section_nova-networking-controller-node.xml11(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml194(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml228(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml264(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml357(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml191(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml289(para) #: ./doc/install-guide/section_heat-install.xml94(para) msgid "Run the following commands:" msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml24(para) #: ./doc/install-guide/section_nova-networking-compute-node.xml57(para) msgid "" "Replace INTERFACE_NAME with the actual interface " "name for the external network. For example, eth1 or " "ens224." msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml50(replaceable) #: ./doc/install-guide/section_nova-networking-compute-node.xml52(replaceable) #: ./doc/install-guide/section_nova-networking-compute-node.xml73(replaceable) #: ./doc/install-guide/section_nova-networking-compute-node.xml74(replaceable) #: ./doc/install-guide/section_basics-networking-nova.xml95(replaceable) #: ./doc/install-guide/section_basics-networking-nova.xml96(replaceable) #: ./doc/install-guide/section_basics-networking-nova.xml106(replaceable) #: ./doc/install-guide/section_basics-networking-neutron.xml104(replaceable) #: ./doc/install-guide/section_basics-networking-neutron.xml105(replaceable) #: ./doc/install-guide/section_basics-networking-neutron.xml115(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml463(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml471(replaceable) msgid "INTERFACE_NAME" msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml55(para) #: ./doc/install-guide/section_nova-networking-controller-node.xml18(para) msgid "" "Edit the /etc/nova/nova.conf file and add the following" " keys to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml77(para) msgid "Restart the services:" msgstr "" #: ./doc/install-guide/section_nova-networking-compute-node.xml80(para) msgid "Start the services and configure them to start when the system boots:" msgstr "" #: ./doc/install-guide/section_trove-verify.xml5(title) msgid "Verify the Database service installation" msgstr "" #: ./doc/install-guide/section_trove-verify.xml6(para) msgid "" "To verify that the Database service is installed and configured correctly, " "try executing a Trove command:" msgstr "" #: ./doc/install-guide/section_trove-verify.xml10(para) msgid "Source the demo-openrc.sh file." msgstr "" #: ./doc/install-guide/section_trove-verify.xml14(para) msgid "Retrieve the Trove instances list:" msgstr "" #: ./doc/install-guide/section_trove-verify.xml16(para) msgid "You should see output similar to this:" msgstr "" #: ./doc/install-guide/section_trove-verify.xml23(para) msgid "" "Assuming you have created an image for the type of database you want, and " "have updated the datastore to use that image, you can now create a Trove " "instance (database). To do this, use the trove command." msgstr "" #: ./doc/install-guide/section_trove-verify.xml30(para) msgid "This example shows you how to create a MySQL 5.5 database:" msgstr "" #: ./doc/install-guide/section_trove-verify.xml32(replaceable) msgid "name" msgstr "" #: ./doc/install-guide/section_trove-verify.xml32(replaceable) msgid "DBNAME" msgstr "" #: ./doc/install-guide/section_trove-verify.xml33(replaceable) msgid "USER" msgstr "" #: ./doc/install-guide/section_trove-verify.xml33(replaceable) msgid "PASSWORD" msgstr "" #: ./doc/install-guide/section_nova-controller.xml5(title) msgid "Install Compute controller services" msgstr "" #: ./doc/install-guide/section_nova-controller.xml6(para) msgid "" "Compute is a collection of services that enable you to launch virtual " "machine instances. You can configure these services to run on separate nodes" " or the same node. In this guide, most services run on the controller node " "and the service that launches virtual machines runs on a dedicated compute " "node. This section shows you how to install and configure these services on " "the controller node." msgstr "" #: ./doc/install-guide/section_nova-controller.xml15(para) msgid "Install the Compute packages necessary for the controller node." msgstr "" #: ./doc/install-guide/section_nova-controller.xml27(para) msgid "" "Respond to the prompts for database management, [keystone_authtoken] " "settings, RabbitMQ " "credentials, and API " "endpoint registration. The command runs " "automatically." msgstr "" #: ./doc/install-guide/section_nova-controller.xml38(para) msgid "" "Compute stores information in a database. In this guide, we use a MySQL " "database on the controller node. Configure Compute with the database " "location and credentials. Replace NOVA_DBPASS " "with the password for the database that you will create in a later step." msgstr "" #: ./doc/install-guide/section_nova-controller.xml44(replaceable) #: ./doc/install-guide/section_nova-controller.xml51(replaceable) #: ./doc/install-guide/section_nova-controller.xml119(replaceable) #: ./doc/install-guide/section_nova-controller.xml121(replaceable) #: ./doc/install-guide/section_nova-compute.xml72(replaceable) msgid "NOVA_DBPASS" msgstr "NOVA_DBPASS" #: ./doc/install-guide/section_nova-controller.xml45(para) msgid "" "Edit the [database] section in the " "/etc/nova/nova.conf file, adding it if necessary, to " "modify this key:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml55(para) msgid "" "Set these configuration keys to configure Compute to use the Qpid message " "broker:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml62(para) #: ./doc/install-guide/section_nova-compute.xml107(para) msgid "" "Configure the Compute service to use the RabbitMQ message broker by setting " "these configuration keys in the [DEFAULT] configuration " "group of the /etc/nova/nova.conf file:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml73(para) msgid "" "Set these configuration keys to configure Compute to use the RabbitMQ " "message broker:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml81(para) msgid "" "Set the , , and " " configuration options to the " "management interface IP address of the controller node:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml89(para) msgid "" "Edit the /etc/nova/nova.conf file and add these lines " "to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml92(para) msgid "" "In Debian, the debconf package automatically sets up " "my_ip parameter but you must edit the " "/etc/nova/nova.conf file to configure the " " and " " options, which appear at the " "end of the file:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml107(para) msgid "" "By default, the Ubuntu packages create an SQLite database. Delete the " "nova.sqlite file created in the " "/var/lib/nova/ directory so that it does not get used " "by mistake:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml114(para) msgid "" "Use the password you created previously to log in as root. Create a " "nova database user:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml124(para) msgid "Create the Compute service tables:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml128(para) msgid "" "Create a nova user that Compute uses to authenticate with" " the Identity Service. Use the service tenant and give " "the user the admin role:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml132(replaceable) #: ./doc/install-guide/section_nova-controller.xml146(replaceable) #: ./doc/install-guide/section_nova-controller.xml166(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml210(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml234(replaceable) #: ./doc/install-guide/section_nova-compute.xml80(replaceable) #: ./doc/install-guide/section_nova-compute.xml99(replaceable) msgid "NOVA_PASS" msgstr "NOVA_PASS" #: ./doc/install-guide/section_nova-controller.xml132(replaceable) msgid "nova@example.com" msgstr "nova@example.com" #: ./doc/install-guide/section_nova-controller.xml136(para) msgid "" "Configure Compute to use these credentials with the Identity Service running" " on the controller. Replace NOVA_PASS with your " "Compute password." msgstr "" #: ./doc/install-guide/section_nova-controller.xml147(para) msgid "" "Edit the [DEFAULT] section in the " "/etc/nova/nova.conf file to add this key:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml155(para) msgid "Add these keys to the [keystone_authtoken] section:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml169(para) msgid "" "You must register Compute with the Identity Service so that other OpenStack " "services can locate it. Register the service and specify the endpoint:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml182(para) msgid "" "Start Compute services and configure them to start when the system boots:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml185(para) msgid "Restart Compute services:" msgstr "" #: ./doc/install-guide/section_nova-controller.xml206(para) msgid "To verify your configuration, list available images:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml10(para) msgid "" "This section details set up for any node that runs the nova-" "compute component but does not run the full network stack." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml15(para) msgid "" "By default, the system-config-firewall automated firewall" " configuration tool is in place on RHEL. This graphical interface (and a " "curses-style interface with -tui on the end of the name) " "enables you to configure IP tables as a basic firewall. You should disable " "it when you work with OpenStack Networking unless you are familiar with the " "underlying network technologies, as, by default, it blocks various types of " "network traffic that are important to neutron services. To disable it, " "launch the program and clear the Enabled check box." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml24(para) msgid "" "After you successfully set up OpenStack Networking with Neutron, you can re-" "enable and configure the tool. However, during OpenStack Networking setup, " "disable the tool to make it easier to debug network issues." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml32(para) msgid "" "Disable packet destination filtering (route verification) to let the " "networking services route traffic to the VMs. Edit the " "/etc/sysctl.conf file and run the following command to " "activate changes:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml43(title) msgid "Install Open vSwitch plug-in" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml44(para) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml187(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml178(para) msgid "" "OpenStack Networking supports a variety of plug-ins. For simplicity, we " "chose to cover the most common plug-in, Open vSwitch, and configure it to " "use basic GRE tunnels for tenant network traffic." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml49(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml183(para) msgid "Install the Open vSwitch plug-in and its dependencies:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml56(para) msgid "Restart Open vSwitch:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml60(para) msgid "Start Open vSwitch and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml68(para) msgid "" "You must set some common configuration options no matter which networking " "technology you choose to use with Open vSwitch. You must add the br-int integration bridge, which connects to the VMs." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml76(para) msgid "" "You must set some common configuration options. You must configure " "Networking core to use OVS. Edit the " "/etc/neutron/neutron.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml85(para) msgid "" "You must configure a firewall as well. You should use the same firewall " "plug-in that you chose to use when you set up the network node. To do this, " "edit " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file and set the firewall_driver value under the " "securitygroup to the same value used on the network node." " For instance, if you chose to use the Hybrid OVS-IPTables plug-in, your " "configuration looks like this:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml98(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml315(para) msgid "" "You must use at least the No-Op firewall. Otherwise, Horizon and other " "OpenStack services cannot get and set required VM boot options." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml104(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml321(para) msgid "Configure the OVS plug-in to start on boot." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml110(para) msgid "" "Tell the OVS plug-in to use GRE tunneling with a br-int integration bridge, a br-tun tunneling " "bridge, and a local IP for the tunnel of " "DATA_INTERFACE's IP Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml125(replaceable) msgid "DATA_INTERFACE_IP" msgstr "DATA_INTERFACE_IP" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml129(title) msgid "Configure common components" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml131(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml84(para) msgid "" "Configure Networking to use keystone for authentication:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml134(para) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml168(para) msgid "" "Set the auth_strategy configuration key to " "keystone in the [DEFAULT] section of " "the file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml140(para) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml97(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml93(para) msgid "" "Set the neutron configuration for" " keystone authentication:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml157(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml187(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml242(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml259(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml35(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml127(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml153(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml360(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml390(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml191(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml236(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml132(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml225(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml237(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml48(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml112(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml141(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml239(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml256(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml111(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml138(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml395(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml409(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml190(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml239(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml283(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml299(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml79(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml105(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml279(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml306(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml76(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml102(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml304(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml334(replaceable) msgid "NEUTRON_PASS" msgstr "NEUTRON_PASS" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml162(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml115(para) msgid "" "To configure neutron to use " "keystone for authentication, edit" " the /etc/neutron/neutron.conf file." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml176(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml127(para) msgid "" "Add these lines to the [keystone_authtoken] section of " "the file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml192(para) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml146(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml143(para) #: ./doc/install-guide/section_neutron-single-flat.xml199(para) #: ./doc/install-guide/section_neutron-single-flat.xml354(para) #: ./doc/install-guide/section_neutron-single-flat.xml438(para) msgid "Configure access to the RabbitMQ service:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml203(para) msgid "" "Configure the RabbitMQ access. Edit the " "/etc/neutron/neutron.conf file to modify the following " "parameters in the [DEFAULT] section." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml212(para) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml158(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml163(para) #: ./doc/install-guide/section_neutron-single-flat.xml208(para) #: ./doc/install-guide/section_neutron-single-flat.xml363(para) #: ./doc/install-guide/section_neutron-single-flat.xml447(para) msgid "Configure access to the Qpid message queue:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml220(replaceable) #: ./doc/install-guide/section_neutron-ovs-compute-node.xml222(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml167(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml169(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml171(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml173(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml216(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml218(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml371(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml373(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml455(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml457(replaceable) msgid "guest" msgstr "ਪ੍ਰਾਹੁਣਾ" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml226(title) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml222(title) msgid "Configure Compute services for Networking" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml228(para) msgid "" "Configure OpenStack Compute to use OpenStack Networking services. Configure " "the /etc/nova/nova.conf file as per instructions below:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml251(para) msgid "" "Configure OpenStack Compute to use OpenStack Networking services. Edit the " "/etc/nova/nova.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml267(para) msgid "" "No matter which firewall driver you chose when you configured the network " "and compute nodes, you must edit the " "/etc/nova/nova.conf file to set the firewall driver to " "nova.virt.firewall.NoopFirewallDriver. Because OpenStack " "Networking handles the firewall, this statement instructs Compute to not use" " a firewall." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml277(para) msgid "" "If you want Networking to handle the firewall, edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file to set the firewall_driver option to the firewall for the" " plug-in. For example, with OVS, edit the file as " "follows:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml292(para) msgid "" "If you do not want to use a firewall in Compute or Networking, edit both " "configuration files and set " "firewall_driver=nova.virt.firewall.NoopFirewallDriver. Also, " "edit the /etc/nova/nova.conf file and comment out or " "remove the security_group_api=neutron statement." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml300(para) msgid "" "Otherwise, when you issue commands, the ERROR: " "The server has either erred or is incapable of performing the requested " "operation. (HTTP 500) error might be returned." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml311(title) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml324(title) #: ./doc/install-guide/section_neutron-ovs-network-node.xml434(title) msgid "Finalize installation" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml313(para) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml300(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml436(para) msgid "" "The neutron-server initialization" " script expects a symbolic link /etc/neutron/plugin.ini" " pointing to the configuration file associated with your chosen plug-in. " "Using Open vSwitch, for example, the symbolic link must point to " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini." " If this symbolic link does not exist, create it using the following " "commands:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml325(para) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml312(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml448(para) msgid "" "The openstack-neutron " "initialization script expects the variable " "NEUTRON_PLUGIN_CONF in file " "/etc/sysconfig/neutron to reference the configuration " "file associated with your chosen plug-in. Using Open vSwitch, for example, " "edit the /etc/sysconfig/neutron file and add the " "following:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml336(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml459(para) msgid "Restart Networking services." msgstr "" #: ./doc/install-guide/section_neutron-ovs-compute-node.xml342(para) msgid "Restart the Compute service." msgstr "ਮੁਲ-ਆਂਕਣ ਸੇਵਾ ਫ਼ਿਰ ਤੋਂ ਚਾਲੂ ਕਰੋ।" #: ./doc/install-guide/section_dashboard-system-reqs.xml6(title) msgid "System requirements" msgstr "ਸਿਸਟਮ ਜਰੂਰਤਾਂ" #: ./doc/install-guide/section_dashboard-system-reqs.xml7(para) msgid "" "Before you install the OpenStack dashboard, you must meet the following " "system requirements:" msgstr "OpenStack ਡੈਸ਼ਬੋਰਡ ਇੰਸਟਾਲ ਕਰਨ ਤੋਂ ਪਹਿਲਾਂ, ਤੁਹਾਨੂੰ ਹੇਠਲੀਆਂ ਜਰੂਰਤਾਂ ਦੀ ਪੂਰਤੀ ਕਰਨੀ ਲਾਜਮੀ ਹੈ:" #: ./doc/install-guide/section_dashboard-system-reqs.xml11(para) msgid "" "OpenStack Compute installation. Enable the Identity Service for user and " "project management." msgstr "OpenStack ਮੁਲ-ਆਂਕਣ ਇੰਸਟਾਲੇਸ਼ਨ। ਵਰਤੋਂਕਾਰ ਅਤੇ ਪ੍ਰਾਜੈਕਟ ਪ੍ਰਬੰਧਨ ਲਈ ਪਛਾਣ ਸੇਵਾ ਯੋਗ ਕਰੋ।" #: ./doc/install-guide/section_dashboard-system-reqs.xml13(para) msgid "Note the URLs of the Identity Service and Compute endpoints." msgstr "ਪਛਾਣ ਸੇਵਾ ਦੇ URL ਸਾਂਭੋ ਅਤੇ ਅੰਤ-ਬਿੰਦੂਆਂ ਦਾ ਮੁਲ-ਆਂਕਣ ਕਰੋ।" #: ./doc/install-guide/section_dashboard-system-reqs.xml17(para) msgid "" "Identity Service user with sudo privileges. Because Apache does not serve " "content from a root user, users must run the dashboard as an Identity " "Service user with sudo privileges." msgstr "sudo ਅਧਿਕਾਰਾਂ ਨਾਲ ਪਛਾਣ ਸੇਵਾ ਵਰਤੋਂਕਾਰ। ਕਿਉਂਕਿ Apache ਰੂਟ ਵਰਤੋਂਕਾਰ ਤੋਂ ਅੰਸ਼ ਨਹੀੰ ਵਰਤਾਉਂਦਾ, ਵਰਤੋਂਕਾਰ sudo ਅਧਿਕਾਰਾਂ ਨਾਲ ਇੱਕ ਪਛਾਣ ਸੇਵਾ ਵਰਤੋਂਕਾਰ ਵਜੋਂ ਡੈਸ਼ਬੋਰਡ ਲਾਜਮੀ ਚਲਾਉਣ।" #: ./doc/install-guide/section_dashboard-system-reqs.xml23(para) msgid "" "Python 2.6 or 2.7. The Python version must support Django. The Python " "version should run on any system, including Mac OS X. Installation " "prerequisites might differ by platform." msgstr "Python 2.6 ਜਾਂ 2.7। ਪਾਇਥਨ ਸੰਸਕਰਣ Django ਦਾ ਸਮਰਥਨ ਲਾਜਮੀ ਕਰੇ। ਪਾਇਥਨ ਸੰਸਕਰਣ ਕਿਸੇ ਵੀ ਸਿਸਟਮ ਤੇ ਚੱਲਣਾ ਚਾਹੀਦਾ ਹੈ, ਸਮੇਤ Mac OS X ਦੇ। ਇੰਸਟਾਲੇਸ਼ਨ ਜਰੂਰਤਾਂ ਮੰਚ ਦੇ ਹਿਸਾਬ ਨਾਲ ਵੱਖਰੀਆਂ ਹੋ ਸਕਦੀਆੰ ਹਨ।" #: ./doc/install-guide/section_dashboard-system-reqs.xml29(para) msgid "" "Then, install and configure the dashboard on a node that can contact the " "Identity Service." msgstr "ਫਿਰ, ਨੋਡ ਜੋ ਕਿ ਪਛਾਣ ਸੇਵਾ ਨਾਲ ਸੰਪਰਕ ਕਰ ਸਕਦੀ ਹੈ ਉੱਤੇ ਡੈਸ਼ਬੋਰਡ ਸੰਰਚਿਤ ਕਰੋ।" #: ./doc/install-guide/section_dashboard-system-reqs.xml31(para) msgid "" "Provide users with the following information so that they can access the " "dashboard through a web browser on their local machine:" msgstr "ਹੇਠਲੀ ਜਾਣਕਾਰੀ ਨਾਲ ਵਰਤੋਂਕਾਰ ਮੁਹੱਈਆ ਕਰਵਾਉ ਤਾਂ ਕਿ ਉਹ ਆਪਣੀ ਸਥਾਨਕ ਮਸ਼ੀਨ ਉੱਤੇ ਵੈੱਬ ਬਰਾਊਜ਼ਰ ਦੁਆਰਾ ਡੈਸ਼ਬੋਰਡ ਤੇ ਦਖਲ ਦੇ ਸਕਦੇ ਹਨ:" #: ./doc/install-guide/section_dashboard-system-reqs.xml36(para) msgid "The public IP address from which they can access the dashboard" msgstr "ਜਨਤਕ IP ਪਤਾ ਜਿਸ ਤੋਂ ਕਿ ਉਹ ਡੈਸ਼ਬੋਰਡ ਤੇ ਦਖਲ ਦੇ ਸਕਦੇ ਹਨ" #: ./doc/install-guide/section_dashboard-system-reqs.xml40(para) msgid "The user name and password with which they can access the dashboard" msgstr "ਵਰਤੋਂਕਾਰ ਨਾਂ ਅਤੇ ਪਛਾਣ-ਸ਼ਬਦ ਜਿਸ ਨਾਲ ਕਿ ਉਹ ਡੈਸ਼ਬੋਰਡ ਦੇ ਦਖਲ ਦੇ ਸਕਣ" #: ./doc/install-guide/section_dashboard-system-reqs.xml44(para) msgid "" "Your web browser, and that of your users, must support HTML5 and have " "cookies and JavaScript enabled." msgstr "ਤੁਹਾਡਾ ਵੈੱਬ ਬਰਾਊਜ਼ਰ, ਅਤੇ ਤੁਹਾਡੇ ਯੂਜ਼ਰਾਂ ਦਾ ਵੀ ਉਹ, HTML5 ਦਾ ਸਮਰਥਨ ਲਾਜਮੀ ਕਰਦਾ ਹੋਵੇ ਅਤੇ ਕੁੱਕੀਆੰ ਅਤੇ ਜਾਵਾ-ਸਕ੍ਰਿਪਟ ਯੋਗ ਹੋਵੇ।" #: ./doc/install-guide/section_dashboard-system-reqs.xml48(para) msgid "" "To use the VNC client with the dashboard, the browser must support HTML5 " "Canvas and HTML5 WebSockets." msgstr "VNC ਕਲਾਈਂਟ ਨੂੰ ਡੈਸ਼ਬੋਰਡ ਨਾਲ ਵਰਤਣ ਲਈ, ਬਰਾਊਜ਼ਰ ਦਾ HTML5 Canvas ਅਤੇ HTML5 WebSockets ਨੂੰ ਸਮਰਥਨ ਕਰਨਾ ਜਰੂਰੀ ਹੈ।" #: ./doc/install-guide/section_dashboard-system-reqs.xml50(para) msgid "" "For details about browsers that support noVNC, see https://github.com/kanaka/noVNC/blob/master/README.md," " and https://github.com/kanaka/noVNC/wiki/Browser-support, " "respectively." msgstr "" #: ./doc/install-guide/section_launch-instance-neutron.xml6(title) msgid "Launch an instance with OpenStack Networking (neutron)" msgstr "" #: ./doc/install-guide/section_launch-instance-neutron.xml95(para) msgid "" "Your first instance uses the default security group. By " "default, this security group implements a firewall that blocks remote access" " to instances. If you would like to permit remote access to your instance, " "launch it and then " "configure remote access." msgstr "" #: ./doc/install-guide/section_launch-instance-neutron.xml173(para) msgid "Verify the demo-net tenant network gateway:" msgstr "" #: ./doc/install-guide/section_launch-instance-neutron.xml185(para) msgid "Verify the ext-net external network:" msgstr "" #: ./doc/install-guide/section_launch-instance-neutron.xml224(para) msgid "" "Create a floating IP address on the ext-" "net external network:" msgstr "" #: ./doc/install-guide/section_launch-instance-neutron.xml242(para) msgid "Associate the floating IP address with your instance:" msgstr "" #: ./doc/install-guide/section_launch-instance-neutron.xml249(para) msgid "Check the status of your floating IP address:" msgstr "" #: ./doc/install-guide/ch_launch-instance.xml5(title) msgid "Launch an instance" msgstr "" #: ./doc/install-guide/ch_launch-instance.xml6(para) msgid "" "An instance is a VM that OpenStack provisions on a compute node. This guide " "shows you how to launch a minimal instance using the " "CirrOS image that you added to your environment in " "the chapter. In these steps, you use the " "command-line interface (CLI) on your controller node or any system with the " "appropriate OpenStack client libraries. To use the dashboard, see the OpenStack User " "Guide." msgstr "" #: ./doc/install-guide/ch_launch-instance.xml15(para) msgid "" "Launch an instance using OpenStack" " Networking (neutron) or legacy networking (nova-network) . For more information, see " "the OpenStack User " "Guide." msgstr "" #: ./doc/install-guide/ch_launch-instance.xml25(para) msgid "" "These steps reference example components created in previous chapters. You " "must adjust certain values such as IP addresses to match your environment." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml8(title) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml8(title) #: ./doc/install-guide/section_nova-networking-controller-node.xml5(title) msgid "Configure controller node" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml11(para) msgid "" "Before you configure OpenStack Networking (neutron), you must create a " "database and Identity service credentials including a user and service." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml15(para) msgid "" "Connect to the database as the root user, create the " "neutron database, and grant the proper access to it:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml18(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml86(para) msgid "" "Replace NEUTRON_DBPASS with a suitable password." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml23(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml25(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml89(replaceable) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml102(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml186(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml199(replaceable) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml276(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml116(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml181(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml185(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml191(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml325(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml329(replaceable) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml335(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml40(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml42(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml73(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml83(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml193(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml234(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml339(replaceable) #: ./doc/install-guide/section_neutron-single-flat.xml348(replaceable) msgid "NEUTRON_DBPASS" msgstr "NEUTRON_DBPASS" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml28(para) msgid "Create Identity service credentials for Networking:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml31(para) msgid "Create the neutron user:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml32(para) msgid "" "Replace NEUTRON_PASS with a suitable password and" " neutron@example.com with a suitable e-mail " "address." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml35(replaceable) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml48(replaceable) msgid "neutron@example.com" msgstr "neutron@example.com" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml38(para) msgid "" "Link the neutron user to the service " "tenant and admin role:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml44(para) msgid "Create the neutron service:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml48(para) msgid "Create the service endpoint:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml59(title) #: ./doc/install-guide/section_neutron-ml2-network-node.xml26(title) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml25(title) msgid "To install the Networking components" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml65(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml40(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml37(para) msgid "SUSE does not use a separate ML2 plug-in package." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml70(title) msgid "To configure the Networking server component" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml71(para) msgid "" "The Networking server component configuration includes the database, " "authentication mechanism, message broker, topology change notifier, and " "plug-in." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml75(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml49(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml46(para) msgid "" "Respond to prompts for database " "management, Identity " "service credentials, service " "endpoint registration, and message" " broker credentials." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml85(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml92(para) msgid "Configure Networking to use the database:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml95(para) msgid "" "Edit the /etc/neutron/neutron.conf file and add the " "following key to the [database] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml98(para) msgid "" "Replace NEUTRON_DBPASS with the password you " "chose for the database." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml107(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml130(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml59(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml82(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml56(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml79(para) msgid "Configure Networking to use the Identity service for authentication:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml109(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml142(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml346(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml380(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml61(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml94(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml58(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml91(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml290(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml324(para) msgid "" "Replace NEUTRON_PASS with the password you chose " "for the neutron user in the Identity service." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml134(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml86(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml83(para) msgid "" "Edit the /etc/neutron/neutron.conf file and add the " "following key to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml140(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml92(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml89(para) msgid "" "Add the following keys to the [keystone_authtoken] " "section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml158(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml172(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml179(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml110(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml124(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml131(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml107(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml121(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml128(para) msgid "Configure Networking to use the message broker:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml159(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml185(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml111(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml137(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml108(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml134(para) #: ./doc/install-guide/section_glance-install.xml85(para) #: ./doc/install-guide/section_glance-install.xml98(para) msgid "" "Replace RABBIT_PASS with the password you chose " "for the guest account in " "RabbitMQ." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml182(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml224(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml272(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml134(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml167(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml131(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml164(para) msgid "" "Edit the /etc/neutron/neutron.conf file and add the " "following keys to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml197(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml215(para) msgid "Configure Networking to notify Compute about network topology changes:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml217(para) msgid "" "Replace SERVICE_TENANT_ID with the " "service tenant identifier (id) in the Identity service " "and NOVA_PASS with the password you chose for the" " nova user in the Identity service." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml233(replaceable) msgid "SERVICE_TENANT_ID" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml239(para) msgid "To obtain the service tenant identifier (id):" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml254(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml268(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml149(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml163(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml146(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml160(para) msgid "" "Configure Networking to use the Modular Layer 2 (ML2) plug-in and associated" " services:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml261(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml281(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml156(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml176(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml153(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml173(para) msgid "" "We recommend adding verbose = True to the " "[DEFAULT] section in " "/etc/neutron/neutron.conf to assist with " "troubleshooting." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml290(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml185(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml182(para) msgid "" "Comment out any lines in the [service_providers] section." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml295(title) #: ./doc/install-guide/section_neutron-ml2-network-node.xml353(title) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml187(title) msgid "To configure the Modular Layer 2 (ML2) plug-in" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml296(para) msgid "" "The ML2 plug-in uses the Open vSwitch (OVS) mechanism (agent) to build the " "virtual networking framework for instances. However, the controller node " "does not need the OVS agent or service because it does not handle instance " "network traffic." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml316(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml219(para) msgid "" "Edit the /etc/neutron/plugins/ml2/ml2_conf.ini file:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml319(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml388(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml222(para) msgid "Add the following keys to the [ml2] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml326(para) msgid "" "Add the following key to the [ml2_type_gre] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml331(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml411(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml245(para) msgid "" "Add the [securitygroup] section and the following keys to" " it:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml340(title) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml284(title) msgid "To configure Compute to use Networking" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml341(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml285(para) msgid "" "By default, most distributions configure Compute to use legacy networking. " "You must reconfigure Compute to manage networks through Networking." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml370(para) #: ./doc/install-guide/section_neutron-ml2-controller-node.xml396(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml314(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml340(para) msgid "" "By default, Compute uses an internal firewall service. Since Networking " "includes a firewall service, you must disable the Compute firewall service " "by using the nova.virt.firewall.NoopFirewallDriver " "firewall driver." msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml378(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml322(para) msgid "" "Edit the /etc/nova/nova.conf and add the following keys" " to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml405(title) #: ./doc/install-guide/section_basics-queue.xml96(title) msgid "To finalize installation" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml407(para) msgid "" "The Networking service initialization scripts expect a symbolic link " "/etc/neutron/plugin.ini pointing to the configuration " "file associated with your chosen plug-in. Using ML2, for example, the " "symbolic link must point to " "/etc/neutron/plugins/ml2/ml2_conf.ini. If this symbolic" " link does not exist, create it using the following commands:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml417(para) msgid "" "The Networking service initialization scripts expect the variable " "NEUTRON_PLUGIN_CONF in file " "/etc/sysconfig/neutron to reference the configuration " "file associated with your chosen plug-in. Using ML2, for example, edit the " "/etc/sysconfig/neutron file and add the following:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml427(para) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml333(para) #: ./doc/install-guide/section_nova-networking-controller-node.xml26(para) msgid "Restart the Compute services:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml436(para) #: ./doc/install-guide/section_neutron-ovs-controller-node.xml339(para) msgid "" "Start the Networking service and configure it to start when the system " "boots:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-controller-node.xml444(para) #: ./doc/install-guide/section_neutron-single-flat.xml258(para) msgid "Restart the Networking service:" msgstr "" #: ./doc/install-guide/section_keystone-services.xml4(title) msgid "Define services and API endpoints" msgstr "" #: ./doc/install-guide/section_keystone-services.xml5(para) msgid "" "So that the Identity Service can track which OpenStack services are " "installed and where they are located on the network, you must register each " "service in your OpenStack installation. To register a service, run these " "commands:" msgstr "" #: ./doc/install-guide/section_keystone-services.xml11(para) msgid ". Describes the service." msgstr "" #: ./doc/install-guide/section_keystone-services.xml15(para) msgid "" ". Associates API " "endpoints with the service." msgstr "" #: ./doc/install-guide/section_keystone-services.xml20(para) msgid "" "You must also register the Identity Service itself. Use the " "OS_SERVICE_TOKEN environment variable, as set previously, for " "authentication." msgstr "" #: ./doc/install-guide/section_keystone-services.xml25(para) msgid "Create a service entry for the Identity Service:" msgstr "" #: ./doc/install-guide/section_keystone-services.xml36(para) #: ./doc/install-guide/object-storage/section_object-storage-install.xml83(para) msgid "" "The service ID is randomly generated and is different from the one shown " "here." msgstr "" #: ./doc/install-guide/section_keystone-services.xml40(para) msgid "" "Specify an API endpoint for the Identity Service by using the returned " "service ID. When you specify an endpoint, you provide URLs for the public " "API, internal API, and admin API. In this guide, the " "controller host name is used. Note that the Identity " "Service uses a different port for the admin API." msgstr "" #: ./doc/install-guide/section_keystone-services.xml63(para) msgid "" "You will need to create an additional endpoint for each service added to " "your OpenStack environment. The sections of this guide associated with the " "installation of each service include the endpoint creation step specific to " "the service." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml6(title) msgid "Verify the Identity Service installation" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml9(para) msgid "" "To verify that the Identity Service is installed and configured correctly, " "clear the values in the OS_SERVICE_TOKEN and " "OS_SERVICE_ENDPOINT environment variables:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml15(para) msgid "" "These variables, which were used to bootstrap the administrative user and " "register the Identity Service, are no longer needed." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml20(para) msgid "You can now use regular user name-based authentication." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml22(para) msgid "" "Request a authentication token by using the admin user " "and the password you chose for that user:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml27(para) msgid "" "In response, you receive a token paired with your user ID. This verifies " "that the Identity Service is running on the expected endpoint and that your " "user account is established with the expected credentials." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml33(para) msgid "" "Verify that authorization behaves as expected. To do so, request " "authorization on a tenant:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml38(para) msgid "" "In response, you receive a token that includes the ID of the tenant that you" " specified. This verifies that your user account has an explicitly defined " "role on the specified tenant and the tenant exists as expected." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml44(para) msgid "" "You can also set your --os-* variables in your " "environment to simplify command-line usage. Set up a admin-" "openrc.sh file with the admin credentials and admin endpoint:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml54(para) msgid "Source this file to read in the environment variables:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml59(para) msgid "" "Verify that your admin-openrc.sh file is configured " "correctly. Run the same command without the --os-* " "arguments:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml63(para) msgid "" "The command returns a token and the ID of the specified tenant. This " "verifies that you have configured your environment variables correctly." msgstr "ਕਮਾਂਡ ਇੱਕ ਟੋਕਨ ਅਤੇ ਦਰਸਾਏ ਗਏ tenant ਦੀ ID ਵਾਪਸ ਕਰਦੀ ਹੈ। ਇਹ ਪ੍ਰਮਾਣਿਤ ਕਰਦਾ ਹੈ ਕਿ ਤੁਸੀਂ ਆਪਣੇ ਵਾਤਾਵਰਣ ਵੇਰੀਏਬਲ ਸਹੀ ਢੰਗ ਨਾਲ ਸੰਰਚਿਤ ਕਰ ਲਏ ਹਨ।" #: ./doc/install-guide/section_keystone-verify.xml68(para) msgid "" "Verify that your admin account has authorization to perform administrative " "commands:" msgstr "" #: ./doc/install-guide/section_keystone-verify.xml85(para) msgid "" "Seeing that the id in the output from the " " command matches the user_id in the " " command, and that the admin role is listed for that user, " "for the related tenant, this verifies that your user account has the " "admin role, which matches the role used in the Identity " "Service policy.json file." msgstr "" #: ./doc/install-guide/section_keystone-verify.xml95(para) msgid "" "As long as you define your credentials and the Identity Service endpoint " "through the command line or environment variables, you can run all OpenStack" " client commands from any machine. For details, see ." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml15(None) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml863(None) msgid "" "@@image: '../common/figures/UseCase-MultiRouter.png'; " "md5=5695d4b003e2f8442eab135cbcd1f842" msgstr "@@image: '../common/figures/UseCase-MultiRouter.png'; md5=5695d4b003e2f8442eab135cbcd1f842" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml25(None) msgid "" "@@image: '../common/figures/demo_routers_with_private_networks.png'; " "md5=985b8cacfd7161ce50ee13106b27f854" msgstr "@@image: '../common/figures/demo_routers_with_private_networks.png'; md5=985b8cacfd7161ce50ee13106b27f854" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml6(title) msgid "Per-tenant routers with private networks" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml7(para) msgid "" "This section describes how to install the OpenStack Networking service and " "its components for a use case that has per-tenant routers with private " "networks." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml19(para) msgid "The following figure shows the setup:" msgstr "ਹੇਠਲਾ ਚਿੱਤਰ ਸੈੱਟਅਪ ਵਿਖਾਉਂਦਾ ਹੈ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml29(para) msgid "As shown in the figure, the setup includes:" msgstr "ਜਿਵੇਂ ਚਿੱਤਰ ਵਿੱਚ ਦਿਖਾਇਆ ਗਿਆ ਹੈ, ਸੈਟ-ਅਪ ਵਿੱਚ ਸ਼ਾਮਿਲ ਹੈ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml32(para) msgid "An interface for management traffic on each node." msgstr "ਹਰੇਕ ਨੋਡ ਉੱਤੇ ਆਵਾਜਾਈ ਪ੍ਰਬੰਧਨ ਲਈ ਇੱਕ ਇੰਟਰਫੇਸ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml36(para) msgid "Use of the Open vSwitch plug-in." msgstr "Open vSwitch ਪਲੱਗ-ਇਨ ਦੀ ਵਰਤੋ." #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml39(para) msgid "GRE tunnels for data transport on all agents." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml42(para) msgid "" "Floating IPs and router gateway ports that are configured in an external " "network, and a physical router that connects the floating IPs and router " "gateway ports to the outside world." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml49(para) msgid "" "Because this example runs a DHCP agent and L3 agent on one node, you must " "set the use_namespace option to True " "in the configuration file for each agent. The default is " "True." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml55(para) msgid "This table describes the nodes:" msgstr "ਇਹ ਸਾਰਣੀ ਨੋਡਾਂ ਦਾ ਵਖਿਆਨ ਕਰਦੀ ਹੈ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml61(th) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml31(th) #: ./doc/install-guide/section_neutron-single-flat.xml32(th) msgid "Node" msgstr "ਨੋਡ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml62(th) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml32(th) #: ./doc/install-guide/app_reserved_uids.xml28(th) #: ./doc/install-guide/section_neutron-single-flat.xml33(th) msgid "Description" msgstr "ਵੇਰਵਾ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml67(td) #: ./doc/install-guide/section_neutron-single-flat.xml38(td) msgid "Controller Node" msgstr "ਨਿਯੰਤਰਕ ਨੋਡ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml68(para) msgid "" "Runs Networking, Identity Service, and all Compute services that are " "required to deploy VMs (nova-api," " nova-scheduler, for example). " "The node must have at least one network interface, which connects to the " "Management Network. The host name is controlnode, which " "other nodes resolve to the IP of the controller node." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml80(para) msgid "" "The nova-network service should " "not be running. This is replaced by Networking." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml87(td) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml281(title) #: ./doc/install-guide/section_neutron-single-flat.xml70(td) msgid "Compute Node" msgstr "ਮੁਲ-ਆਂਕਣ ਨੋਡ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml90(systemitem) #: ./doc/install-guide/section_neutron-single-flat.xml73(systemitem) msgid "nova-compute" msgstr "nova-compute" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml92(systemitem) msgid "nova-*" msgstr "nova-*" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml88(td) msgid "" "Runs the Networking L2 agent and the Compute services that run VMs " "( specifically, and optionally other " "services depending on configuration). The node must have at least two " "network interfaces. One interface communicates with the controller node " "through the management network. The other node is used for the VM traffic on" " the data network. The VM receives its IP address from the DHCP agent on " "this network." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml101(td) #: ./doc/install-guide/section_neutron-single-flat.xml84(td) msgid "Network Node" msgstr "ਨੈੱਟਵਰਕ ਨੋਡ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml102(td) msgid "" "Runs Networking L2 agent, DHCP agent and L3 agent. This node has access to " "the external network. The DHCP agent allocates IP addresses to the VMs on " "data network. (Technically, the addresses are allocated by the Networking " "server, and distributed by the dhcp agent.) The node must have at least two " "network interfaces. One interface communicates with the controller node " "through the management network. The other interface is used as external " "network. GRE tunnels are set up as data networks." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml115(td) #: ./doc/install-guide/section_neutron-single-flat.xml94(td) msgid "Router" msgstr "ਰਾਊਟਰ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml116(td) #: ./doc/install-guide/section_neutron-single-flat.xml95(td) msgid "" "Router has IP 30.0.0.1, which is the default gateway for all VMs. The router" " must be able to access public networks." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml122(para) msgid "The use case assumes the following:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml123(emphasis) #: ./doc/install-guide/section_basics-networking-nova.xml42(title) #: ./doc/install-guide/section_basics-networking-neutron.xml46(title) #: ./doc/install-guide/section_neutron-single-flat.xml102(emphasis) msgid "Controller node" msgstr "ਨਿਯੰਤਰਕ ਨੋਡ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml126(para) #: ./doc/install-guide/section_neutron-single-flat.xml105(para) msgid "Relevant Compute services are installed, configured, and running." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml130(para) msgid "" "Glance is installed, configured, and running. In addition, an image named " "tty must be present." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml135(para) msgid "" "Identity is installed, configured, and running. A Networking user named " "neutron should be created on tenant " "service with password " "NEUTRON_PASS." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml145(para) msgid "" "RabbitMQ is running with default guest and password " "RABBIT_PASS." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml150(para) #: ./doc/install-guide/section_neutron-single-flat.xml133(para) msgid "MySQL server (user is root)." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml143(para) msgid "Additional services: " msgstr "ਵਧੀਕ ਸੇਵਾਵਾਂ: " #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml156(emphasis) #: ./doc/install-guide/section_basics-networking-nova.xml70(title) #: ./doc/install-guide/section_basics-networking-neutron.xml156(title) #: ./doc/install-guide/section_neutron-single-flat.xml139(emphasis) msgid "Compute node" msgstr "ਨੋਡ ਦਾ ਮੁਲ-ਆਂਕਣ ਕਰੋ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml157(para) msgid "Install and configure Compute." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml159(title) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml91(title) #: ./doc/install-guide/section_neutron-single-flat.xml146(title) msgid "Install" msgstr "ਇੰਸਟਾਲ ਕਰੋ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml162(emphasis) #: ./doc/install-guide/section_neutron-single-flat.xml149(emphasis) msgid "Controller node - Networking server" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml166(para) #: ./doc/install-guide/section_neutron-single-flat.xml154(para) msgid "Install the Networking server." msgstr "ਨੈੱਟਵਰਕਿੰਗ ਸਰਵਰ ਇੰਸਟਾਲ ਕਰੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml169(para) #: ./doc/install-guide/section_neutron-single-flat.xml168(para) msgid "Create database ovs_neutron." msgstr "ਡਾਟਾ-ਬੇਸ ovs_neutron ਬਣਾਉ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml173(para) msgid "" "Update the Networking configuration file, " "/etc/neutron/neutron.conf, with plug-in choice and Identity " "Service user as necessary:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml202(para) msgid "" "Update the plug-in configuration file, " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml210(para) msgid "Start the Networking server." msgstr "ਨੈੱਟਵਰਕਿੰਗ ਸਰਵਰ ਸ਼ੁਰੂ ਕਰੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml211(para) msgid "" "The Networking server can be a service of the operating system. The command " "to start the service depends on your operating system. The following command" " runs the Networking server directly:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml223(emphasis) #: ./doc/install-guide/section_neutron-single-flat.xml265(emphasis) msgid "Compute node - Compute" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml225(para) msgid "Install Compute services." msgstr "ਮੁਲ-ਆਂਕਣ ਸੇਵਾਵਾਂ ਇੰਸਟਾਲ ਕਰੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml228(para) msgid "" "Update the Compute /etc/nova/nova.conf configuration " "file. Make sure the following line appears at the end of this file:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml243(para) msgid "Restart relevant Compute services." msgstr "ਸੰਬੰਧਿਤ ਮੁਲ-ਆਂਕਣ ਸੇਵਾਵਾਂ ਫਿਰ ਤੋਂ ਚਾਲੂ ਕਰੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml249(emphasis) msgid "Compute and Networking node - L2 agent" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml253(para) msgid "Install and start Open vSwitch." msgstr "ਓਪਨ vSwitch ਨੂੰ ਇੰਸਟਾਲ ਅਤੇ ਸ਼ੁਰੂ ਕਰੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml256(para) msgid "Install the L2 agent (Neutron Open vSwitch agent)." msgstr "L2 ਏਜੰਟ (Neutron Open vSwitch agent) ਇੰਸਟਾਲ ਕਰੋ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml260(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml168(para) msgid "Add the integration bridge to the Open vSwitch:" msgstr "ਓਪਨ vSwitch ਨਾਲ ਏਕੀਕਰਨ ਪੁਲ ਨੂੰ ਜੋੜੋ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml265(para) msgid "" "Update the Networking configuration file, " "/etc/neutron/neutron.conf:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml279(para) msgid "" "Update the plug-in configuration file, " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml282(para) msgid "Compute node:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml288(para) msgid "Network node:" msgstr "ਨੈੱਟਵਰਕ ਨੋਡ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml296(para) msgid "Create the integration bridge br-int:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml301(para) msgid "Start the Networking L2 agent" msgstr "ਨੈੱਟਵਰਕ ਵਾਲਾ L2 ਏਜੰਟ ਸ਼ੁਰੂ ਕਰੋ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml302(para) msgid "" "The Networking Open vSwitch L2 agent can be a service of the operating " "system. The command to start depends on your operating system. The following" " command runs the service directly:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml313(emphasis) #: ./doc/install-guide/section_neutron-single-flat.xml411(emphasis) msgid "Network node - DHCP agent" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml317(para) #: ./doc/install-guide/section_neutron-single-flat.xml414(para) msgid "Install the DHCP agent." msgstr "DHCP ਏਜੰਟ ਇੰਸਟਾਲ ਕਰੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml320(para) msgid "" "Update the Networking configuration file, " "/etc/neutron/neutron.conf" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml331(literal) msgid "allow_overlapping_ips" msgstr "allow_overlapping_ips" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml330(emphasis) msgid "" "Set because TenantA and TenantC use overlapping subnets." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml336(para) msgid "" "Update the DHCP /etc/neutron/dhcp_agent.ini " "configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml342(para) msgid "Start the DHCP agent." msgstr "DHCP ਏਜੰਟ ਸ਼ੁਰੂ ਕਰੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml343(para) msgid "" "The Networking DHCP agent can be a service of operating system. The command " "to start the service depends on your operating system. The following command" " runs the service directly:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml354(emphasis) msgid "Network node - L3 agent" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml358(para) msgid "Install the L3 agent." msgstr "L3 ਏਜੰਟ ਇੰਸਟਾਲ ਕਰੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml361(para) msgid "Add the external network bridge" msgstr "ਬਾਹਰੀ ਨੈੱਟਵਰਕ ਪੁਲ ਜੋੜੋ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml365(para) msgid "" "Add the physical interface, for example eth0, that is connected to the " "outside network to this bridge:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml371(para) msgid "" "Update the L3 configuration file " "/etc/neutron/l3_agent.ini:" msgstr "L3 ਸੰਰਚਨਾ ਫ਼ਾਈਲ /etc/neutron/l3_agent.ini ਅਪਡੇਟ ਕਰੋ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml378(literal) msgid "use_namespaces" msgstr "use_namespaces" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml377(emphasis) msgid "" "Set the option (it is True by default) because TenantA and " "TenantC have overlapping subnets, and the routers are hosted on one l3 agent" " network node." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml386(para) msgid "Start the L3 agent" msgstr "L3 ਏਜੰਟ ਸ਼ੁਰੂ ਕਰੋ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml387(para) msgid "" "The Networking L3 agent can be a service of the operating system. The " "command to start the service depends on your operating system. The following" " command starts the agent directly:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml401(title) #: ./doc/install-guide/section_neutron-single-flat.xml477(title) msgid "Configure logical network" msgstr "ਲੌਜੀਕਲ ਨੈੱਟਵਰਕ ਸੰਰਚਿਤ ਕਰੋ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml402(para) msgid "You can run these commands on the network node." msgstr "ਤੁਸੀਂ ਇਹ ਕਮਾਂਡਾਂ ਨੈੱਟਵਰਕ ਨੋਡ ਉੱਤੇ ਚਲਾ ਸਕਦੇ ਹੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml404(para) msgid "" "Ensure that the following environment variables are set. Various clients use" " these to access the Identity Service." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml414(para) #: ./doc/install-guide/section_neutron-single-flat.xml490(para) msgid "Get the tenant ID (Used as $TENANT_ID later):" msgstr "tenant ID ਲਵੋ (ਬਾਅਦ ਵਿੱਚ $TENANt ID ਦੇ ਵਜੋਂ ਵਰਤੀ ਗਈ):" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml428(para) msgid "Get user information:" msgstr "ਵਰਤੋਂਕਾਰ ਜਾਣਕਾਰੀ ਹਾਸਲ ਕਰੋ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml441(para) msgid "Create the external network and its subnet by admin user:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml479(literal) msgid "provider:network_type local" msgstr "provider:network_type local" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml482(literal) msgid "router:external true" msgstr "router:external ਸਹੀ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml478(emphasis) msgid "" " means that Networking does not have to realize this network" " through provider network. means that an external network " "is created where you can create the floating IP and router gateway port." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml488(para) msgid "Add an IP on the external network to br-ex." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml489(para) msgid "" "Because br-ex is the external network bridge, add an IP 30.0.0.100/24 to br-" "ex and ping the floating IP of the VM from our network node." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml497(para) msgid "Serve TenantA." msgstr "TenantA ਵਰਤਾਉ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml498(para) msgid "" "For TenantA, create a private network, subnet, server, router, and floating " "IP." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml502(para) msgid "Create a network for TenantA:" msgstr "TenantA ਲਈ ਨੈੱਟਵਰਕ ਬਣਾਉ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml518(para) msgid "" "After that, you can use admin user to query the provider network " "information:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml537(para) msgid "" "The network has GRE tunnel ID (for example, provider:segmentation_id) 1." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml542(para) msgid "Create a subnet on the network TenantA-Net:" msgstr "TenantA-Net ਨੈੱਟਵਰਕ ਉੱਤੇ ਸਬਨੈੱਟ ਬਣਾਉ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml564(para) msgid "Create a server for TenantA:" msgstr "TenantA ਲਈ ਸਰਵਰ ਬਣਾਉ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml576(para) msgid "" "It is important to understand that you should not attach the instance to " "Ext-Net directly. Instead, you must use a floating IP to make it accessible " "from the external network." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml585(para) msgid "Create and configure a router for TenantA:" msgstr "TenantA ਲਈ ਰਾਉਟਰ ਬਣਾਉ ਅਤੇ ਸੰਰਚਿਤ ਕਰੋ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml603(para) msgid "Added interface to router TenantA-R1" msgstr "ਰਾਊਟਰ TenantA-R1ਨਾਲ ਇੰਟਰਫੇਸ ਜੋੜਿਆ ਗਿਆ" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml612(para) msgid "Associate a floating IP for TenantA_VM1." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml616(para) msgid "Create a floating IP:" msgstr "ਦਸ਼ਮਲਵ ਵਾਲਾ IP ਬਣਾਉ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml633(para) msgid "" "Get the port ID of the VM with ID 7c5e6499-7ef7-4e36-8216-62c2941d21ff:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml645(para) msgid "Associate the floating IP with the VM port:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml663(para) msgid "Ping the public network from the server of TenantA." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml665(para) msgid "" "In my environment, 192.168.1.0/24 is my public network connected with my " "physical router, which also connects to the external network 30.0.0.0/24. " "With the floating IP and virtual router, you can ping the public network " "within the server of tenant A:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml683(para) msgid "Ping the floating IP of TenantA's server:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml696(para) msgid "Create other servers for TenantA." msgstr "TenantA ਲਈ ਹੋਰ ਸਰਵਰ ਬਣਾਉ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml697(para) msgid "You can create more servers for TenantA and add floating IPs for them." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml701(para) msgid "Serve TenantC." msgstr "TenantC ਵਰਤਾਉ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml702(para) msgid "" "For TenantC, you create two private networks with subnet 10.0.0.0/24 and " "subnet 10.0.1.0/24, some servers, one router to connect to these two subnets" " and some floating IPs." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml708(para) msgid "Create networks and subnets for TenantC:" msgstr "TenantC ਲਈ ਨੈੱਟਵਰਕ ਅਤੇ ਸਬ-ਨੈੱਟ ਬਣਾਉ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml721(para) msgid "" "After that you can use admin user to query the network's provider network " "information:" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml757(para) msgid "" "You can see GRE tunnel IDs (such as, provider:segmentation_id) 2 and 3. And " "also note the network IDs and subnet IDs because you use them to create VMs " "and the router." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml764(para) msgid "Create a server TenantC-VM1 for TenantC on TenantC-Net1." msgstr "TenantC-Net1 ਉੱਪਰ TenantC ਲਈ ਇੱਕ TenantC-VM1 ਸਰਵਰ ਬਣਾਉ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml771(para) msgid "Create a server TenantC-VM3 for TenantC on TenantC-Net2." msgstr "TenantC-Net2 ਉੱਪਰ TenantC ਲਈ ਇੱਕ TenantC-VM3 ਸਰਵਰ ਬਣਾਉ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml778(para) msgid "List servers of TenantC." msgstr "TenantC ਦੇ ਸਰਵਰ ਸੂਚੀਬੱਧ ਕਰੋ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml787(para) msgid "Note the server IDs because you use them later." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml791(para) msgid "Make sure servers get their IPs." msgstr "ਯਕੀਨੀ ਬਣਾਉ ਕਿ ਸਰਵਰਾਂ ਨੂੰ ਆਪਣੇ IP ਮਿਲ ਜਾਣ।" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml792(para) msgid "" "You can use VNC to log on the VMs to check if they get IPs. If not, you must" " make sure that the Networking components are running correctly and the GRE " "tunnels work." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml799(para) msgid "Create and configure a router for TenantC:" msgstr "TenantC ਲਈ ਰਾਉਟਰ ਬਣਾਉ ਅਤੇ ਸੰਰਚਿਤ ਕਰੋ:" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml814(para) msgid "Checkpoint: ping from within TenantC's servers." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml816(para) msgid "" "Because a router connects to two subnets, the VMs on these subnets can ping " "each other. And because the gateway for the router is set, TenantC's servers" " can ping external network IPs, such as 192.168.1.1, 30.0.0.1, and so on." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml824(para) #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml835(para) msgid "Associate floating IPs for TenantC's servers." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml826(para) msgid "" "Because a router connects to two subnets, the VMs on these subnets can ping " "each other. And because the gateway interface for the router is set, " "TenantC's servers can ping external network IPs, such as 192.168.1.1, " "30.0.0.1, and so on." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml837(para) msgid "" "You can use similar commands to the ones used in the section for TenantA." msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml845(title) msgid "Use case: per-tenant routers with private networks" msgstr "" #: ./doc/install-guide/section_neutron-per-tenant-routers-with-private-networks.xml847(para) msgid "" "This use case represents a more advanced router scenario in which each " "tenant gets at least one router, and potentially has access to the " "Networking API to create additional routers. The tenant can create their own" " networks, potentially uplinking those networks to a router. This model " "enables tenant-defined, multi-tier applications, with each tier being a " "separate network behind the router. Because there are multiple routers, " "tenant subnets can overlap without conflicting, because access to external " "networks all happens through SNAT or floating IPs. Each router uplink and " "floating IP is allocated from the external network subnet." msgstr "" #: ./doc/install-guide/ch_networking.xml6(title) msgid "Add a networking service" msgstr "" #: ./doc/install-guide/ch_networking.xml7(para) msgid "" "Configuring networking in OpenStack can be a bewildering experience. This " "guide provides step-by-step instructions for both OpenStack Networking " "(neutron) and the legacy networking (nova-network) service. If you are " "unsure which to use, we recommend trying OpenStack Networking because it " "offers a considerable number of features and flexibility including " "plug-ins for a variety of " "emerging products supporting virtual networking. See " "the Networking chapter of the " "OpenStack Cloud Administrator Guide for more " "information." msgstr "" #: ./doc/install-guide/ch_networking.xml20(title) #: ./doc/install-guide/section_basics-networking-neutron.xml6(title) msgid "OpenStack Networking (neutron)" msgstr "" #: ./doc/install-guide/ch_networking.xml23(title) msgid "Modular Layer 2 (ML2) plug-in" msgstr "" #: ./doc/install-guide/ch_networking.xml31(title) #: ./doc/install-guide/section_basics-networking-nova.xml6(title) msgid "Legacy networking (nova-network)" msgstr "" #: ./doc/install-guide/ch_networking.xml38(para) msgid "" "Your OpenStack environment now includes the core components necessary to " "launch a basic instance. You can launch an" " instance or add more services to your environment in the following " "chapters." msgstr "" #: ./doc/install-guide/ch_horizon.xml6(title) msgid "Add the dashboard" msgstr "ਡੈਸ਼ਬੋਰਡ ਜੋੜੋ" #: ./doc/install-guide/ch_horizon.xml7(para) msgid "" "The OpenStack dashboard, also known as Horizon, is a Web " "interface that enables cloud administrators and users to manage various " "OpenStack resources and services." msgstr "" #: ./doc/install-guide/ch_horizon.xml12(para) msgid "" "The dashboard enables web-based interactions with the OpenStack Compute " "cloud controller through the OpenStack APIs." msgstr "" #: ./doc/install-guide/ch_horizon.xml15(para) msgid "" "These instructions show an example deployment configured with an Apache web " "server." msgstr "" #: ./doc/install-guide/ch_horizon.xml17(para) msgid "" "After you install and configure the " "dashboard, you can complete the following tasks:" msgstr "ਡੈਸ਼ਬੋਰਡ ਨੂੰ ਇੰਸਟਾਲ ਅਤੇ ਸੰਰਚਿਤ ਕਰਨ ਤੋਂ ਬਾਅਦ ਤੁਸੀ ਹੇਠਲੇ ਕਾਰਜ ਪੂਰੇ ਕਰ ਸਕਦੇ ਹੋ:" #: ./doc/install-guide/ch_horizon.xml22(para) msgid "" "Customize your dashboard. See section Customize the dashboard in the OpenStack Cloud Administrator " "Guide." msgstr "" #: ./doc/install-guide/ch_horizon.xml30(para) msgid "" "Set up session storage for the dashboard. See ." msgstr "" #: ./doc/install-guide/ch_horizon.xml39(para) msgid "" "Your OpenStack environment now includes the dashboard. You can launch an instance or add more services to your " "environment in the following chapters." msgstr "" #: ./doc/install-guide/section_heat-verify.xml6(title) msgid "Verify the Orchestration service installation" msgstr "" #: ./doc/install-guide/section_heat-verify.xml8(para) msgid "" "To verify that the Orchestration service is installed and configured " "correctly, make sure that your credentials are set up correctly in the " "demo-openrc.sh file. Source the file, as follows:" msgstr "" #: ./doc/install-guide/section_heat-verify.xml14(para) msgid "" "The Orchestration Module uses templates to describe stacks. To learn about " "the template languages, see the" " Template Guide in the Heat developer " "documentation." msgstr "" #: ./doc/install-guide/section_heat-verify.xml20(para) msgid "" "Create a test template in the test-stack.yml file with " "the following content:" msgstr "" #: ./doc/install-guide/section_heat-verify.xml24(para) msgid "Use the command to create a stack from this template:" msgstr "" #: ./doc/install-guide/section_heat-verify.xml35(para) msgid "" "Verify that the stack was created successfully with the " "command:" msgstr "" #: ./doc/install-guide/ch_ceilometer.xml6(title) msgid "Add the Telemetry module" msgstr "" #: ./doc/install-guide/ch_ceilometer.xml7(para) msgid "" "Telemetry provides a framework for monitoring and metering the OpenStack " "cloud. It is also known as the Ceilometer project." msgstr "" #: ./doc/install-guide/ch_ceilometer.xml19(para) msgid "" "Your OpenStack environment now includes Telemetry. You can launch an instance or add more services to your " "environment in the previous chapters." msgstr "" #: ./doc/install-guide/ch_keystone.xml6(title) msgid "Configure the Identity Service" msgstr "ਸ਼ਨਾਖਤ ਸੇਵਾ ਸੰਰਚਿਤ ਕਰੋ" #: ./doc/install-guide/ch_heat.xml6(title) msgid "Add the Orchestration service" msgstr "" #: ./doc/install-guide/ch_heat.xml7(para) msgid "" "Use the Orchestration module to create cloud resources using a template " "language called HOT. The integrated project name is Heat." msgstr "" #: ./doc/install-guide/ch_heat.xml15(para) msgid "" "Your OpenStack environment now includes Orchestration. You can launch an instance or add more services to your " "environment in the following chapters." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-rabbitqm.xml15(None) msgid "" "@@image: 'figures/debconf-screenshots/rabbitmq-host.png'; " "md5=5353ad857884a2d31847cf82efbdc6b6" msgstr "@@image: 'figures/debconf-screenshots/rabbitmq-host.png'; md5=5353ad857884a2d31847cf82efbdc6b6" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-rabbitqm.xml22(None) msgid "" "@@image: 'figures/debconf-screenshots/rabbitmq-user.png'; " "md5=33a3c1182e79ed65f1b1b63f2156792c" msgstr "@@image: 'figures/debconf-screenshots/rabbitmq-user.png'; md5=33a3c1182e79ed65f1b1b63f2156792c" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-rabbitqm.xml29(None) msgid "" "@@image: 'figures/debconf-screenshots/rabbitmq-password.png'; " "md5=6385185200d20e96b6316ae15ae1255d" msgstr "@@image: 'figures/debconf-screenshots/rabbitmq-password.png'; md5=6385185200d20e96b6316ae15ae1255d" #: ./doc/install-guide/section_debconf-rabbitqm.xml6(title) msgid "RabbitMQ credentials parameters" msgstr "" #: ./doc/install-guide/section_debconf-rabbitqm.xml7(para) msgid "" "For every package that must connect to a Messaging Server, the Debian " "package enables you to configure the IP address for that server and the user" " name and password that is used to connect. The following example shows " "configuration with the ceilometer-" "common package:" msgstr "" #: ./doc/install-guide/section_debconf-rabbitqm.xml33(para) msgid "" "These debconf screens appear in: ceilometer-" "common, cinder-" "common, glance-" "common, heat-common," " neutron-common and nova-common." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml16(None) msgid "" "@@image: '../common/figures/Neutron-PhysNet-Diagram.png'; " "md5=ea581fd58c57da1a6c9512b82027a195" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml660(None) msgid "" "@@image: '../common/figures/UseCase-SingleRouter.png'; " "md5=63d21d52d32ed7fa1c1dad1a1fd88eb5" msgstr "@@image: '../common/figures/UseCase-SingleRouter.png'; md5=63d21d52d32ed7fa1c1dad1a1fd88eb5" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml6(title) msgid "Provider router with private networks" msgstr "ਨਿੱਜੀ ਨੈੱਟਵਰਕਾਂ ਲਈ ਮੁਹੱਈਆ ਕਰਤਾ ਰਾਊਟਰ" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml7(para) msgid "" "This section describes how to install the OpenStack Networking service and " "its components for a single router use case: a provider router with private " "networks." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml10(para) msgid "This figure shows the set up:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml21(para) msgid "" "Because you run the DHCP agent and L3 agent on one node, you must set " "use_namespaces to True (which is the " "default) in the configuration files for both agents." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml26(para) msgid "The configuration includes these nodes:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml28(caption) msgid "Nodes for use case" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml37(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml93(title) msgid "Controller" msgstr "ਨਿਯੰਤਰਕ" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml38(para) msgid "" "Runs the Networking service, Identity Service, and all Compute services that" " are required to deploy a VM." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml41(para) msgid "" "The service must have at least two network interfaces. The first should be " "connected to the Management Network to communicate with the compute and " "network nodes. The second interface should be connected to the API/public " "network." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml49(para) msgid "Compute" msgstr "ਮੁਲ-ਆਂਕਣ" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml50(para) msgid "Runs Compute and the Networking L2 agent." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml52(para) msgid "This node does not have access to the public network." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml54(para) msgid "" "The node must have a network interface that communicates with the controller" " node through the management network. The VM receives its IP address from " "the DHCP agent on this network." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml61(para) msgid "Network" msgstr "ਸੰਜਾਲ" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml62(para) msgid "Runs Networking L2 agent, DHCP agent, and L3 agent." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml64(para) msgid "" "This node has access to the public network. The DHCP agent allocates IP " "addresses to the VMs on the network. The L3 agent performs NAT and enables " "the VMs to access the public network." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml71(para) msgid "" "A network interface that communicates with the controller node through the " "management network" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml77(para) msgid "A network interface on the data network that manages VM traffic" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml82(para) msgid "" "A network interface that connects to the external gateway on the network" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml69(para) msgid "The node must have:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml95(title) msgid "To install and configure the controller node" msgstr "ਨਿਯੰਤਰਕ ਨੋਡ ਨੂੰ ਇੰਸਟਾਲ ਅਤੇ ਸੰਰਚਿਤ ਕਰੋ" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml98(para) msgid "Run this command:" msgstr "ਇਹ ਕਮਾਂਡ ਚਲਾਉ:" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml104(para) msgid "Configure Networking services:" msgstr "ਨੈੱਟਵਰਕਿੰਗ ਸੇਵਾਵਾੰ ਸੰਰਚਿਤ ਕਰੋ:" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml107(para) msgid "" "Edit the /etc/neutron/neutron.conf file and add these " "lines:" msgstr "/etc/neutron/neutron.conf ਫਾਈਲ ਸੋਧੋ ਅਤੇ ਇਹ ਸਤਰ੍ਹਾਂ ਜੋੜੋ:" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml119(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml338(para) msgid "" "Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini file and " "add these lines:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml127(para) msgid "" "Edit the /etc/neutron/api-paste.ini file and add these" " lines:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml137(para) msgid "Start the services:" msgstr "ਸੇਵਾਵਾਂ ਸ਼ੁਰੂ ਕਰੋ:" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml144(title) #: ./doc/install-guide/section_basics-networking-neutron.xml77(title) msgid "Network node" msgstr "ਨੈੱਟਵਰਕ ਨੋਡ" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml146(title) msgid "Install and configure the network node" msgstr "" #. FIXME Review Fedora instructions #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml148(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml287(para) msgid "Install the packages:" msgstr "ਪੰਡਾਂ (ਪੈਕੇਜ) ਇੰਸਟਾਲ ਕਰੋ:" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml157(para) msgid "" "Start Open vSwitch and " "configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml173(para) msgid "" "Update the OpenStack Networking " "/etc/neutron/neutron.conf configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml194(para) msgid "" "Update the plug-in " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml203(para) msgid "" "All VM communication between the nodes occurs through the br-" "eth1 bridge." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml206(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml311(para) msgid "Create the br-eth1 network bridge:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml212(para) msgid "Create the external network bridge to the Open vSwitch:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml218(para) msgid "" "Edit the /etc/neutron/l3_agent.ini file and add these " "lines:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml230(para) msgid "" "Edit the /etc/neutron/api-paste.ini file and add these " "lines:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml240(para) msgid "" "Edit the /etc/neutron/dhcp_agent.ini file and add this " "line:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml246(para) msgid "Restart networking services:" msgstr "ਨੈੱਟਵਰਕਿੰਗ ਸੇਵਾਵਾਂ ਮੁੜ ਚਾਲੂ ਕਰੋ:" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml252(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml352(para) msgid "Start and permanently enable networking services:" msgstr "" #. FIXME: Required on Debian/Ubuntu? #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml269(para) msgid "" "Enable the neutron-ovs-cleanup " "service. This service starts on boot and ensures that Networking has full " "control over the creation and management of tap devices." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml284(title) msgid "Install and configure the compute node" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml293(para) msgid "" "Start the OpenvSwitch service and configure it to start when the " "system boots:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml304(para) msgid "Create the integration bridge:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml308(para) msgid "" "All VM communication between the nodes occur through the br-" "eth1 bridge." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml317(para) msgid "" "Edit the OpenStack Networking /etc/neutron/neutron.conf" " configuration file and add this line:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml347(para) msgid "Restart the OpenvSwitch Neutron plug-in agent:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml363(title) msgid "Logical network configuration" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml365(para) msgid "Run these commands on the network node." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml366(para) #: ./doc/install-guide/section_neutron-single-flat.xml480(para) msgid "" "Ensure that the following environment variables are set. Various clients use" " these variables to access the Identity Service." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml372(para) msgid "Create an adminrc file that contains these lines:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml381(para) msgid "" "Export the environment variables in the adminrc file:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml386(para) msgid "" "The admin tenant can define resources that other tenants " "can use but cannot modify. These resources are a provider network and its " "associated router." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml390(para) msgid "" "The admin user creates a network and subnet on behalf of " "tenant_A." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml392(para) msgid "A tenant_A user can also complete these steps." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml395(title) msgid "Configure internal networking" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml397(para) msgid "Get the tenant_A tenant ID:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml402(para) msgid "" "Create the net1 internal network for the " "tenant_A tenant:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml423(para) msgid "" "Create a subnet on the net1 network and store its ID in a" " variable:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml443(replaceable) msgid "c395cb5d-ba03-41ee-8a12-7e792d51a167" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml445(para) #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml473(para) msgid "The id value will be different on your system." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml450(para) msgid "" "A user with the admin role in the " "admin tenant must complete these steps." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml454(title) msgid "Configure the router and external networking" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml457(para) msgid "" "Create a router1 router and store its ID in the " "ROUTER_ID variable:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml471(replaceable) msgid "685f64e7-a020-4fdf-a8ad-e41194ae124b" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml477(para) msgid "" "The --tenant-id parameter is not specified, so this " "router is assigned to the admin tenant." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml484(para) msgid "" "Add an interface to the router1 router and attach it to " "the subnet from net1:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml491(para) msgid "" "You can repeat this step to add interfaces for networks that belong to other" " tenants." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml497(para) msgid "" "Create the ext_net external network and store its ID in a" " the EXTERNAL_NETWORK_ID variable:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml519(replaceable) msgid "8858732b-0400-41f6-8e5c-25590e67ffeb" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml522(para) msgid "Create the subnet for floating IPs." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml524(para) msgid "The DHCP service is disabled for this subnet." msgstr "ਇਸ ਸਬਨੈੱਟ ਲਈ DHCP ਸੇਵਾ ਅਯੋਗ ਕੀਤੀ ਗਈ ਹੈ।" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml547(para) msgid "Set the gateway for the router to the external network:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml553(para) msgid "" "A user from tenant_A completes these steps, so the " "credentials in the environment variables are different than those in the " "previous procedure." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml557(title) msgid "Allocate floating IP addresses" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml559(para) msgid "" "You can associate a floating IP address with a VM after it starts. Store the" " port ID that was allocated for the VM in the PORT_ID " "variable:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml569(replaceable) msgid "1cdc671d-a296-4476-9a75-f9ca1d92fd26" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml575(replaceable) msgid "9aa47099-b87b-488c-8c1d-32f993626a30" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml578(para) msgid "" "Allocate a floating IP and store its ID in the " "FLOATING_ID variable:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml593(replaceable) msgid "7.7.7.131" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml596(para) msgid "Associate the floating IP with the port for the VM:" msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml602(para) msgid "Show the floating IP:" msgstr "ਦਸ਼ਮਲਵ ਵਾਲਾ IP ਵਿਖਾਉ:" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml617(para) msgid "Test the floating IP:" msgstr "ਦਸ਼ਮਲਵ ਵਾਲਾ IP ਪਰਖੋ:" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml626(title) msgid "Use case: provider router with private networks" msgstr "ਵਰਤੋਂ ਮਾਮਲਾ: ਨਿੱਜੀ ਨੈੱਟਵਰਕਾਂ ਲਈ ਮੁਹੱਈਆ ਕਰਤਾ ਰਾਊਟਰ" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml627(para) msgid "" "This use case provides each tenant with one or more private networks that " "connect to the outside world through an OpenStack Networking router. When " "each tenant gets exactly one network, this architecture maps to the same " "logical topology as the VlanManager in Compute (although of course, " "Networking does not require VLANs). Using the Networking API, the tenant can" " only see a network for each private network assigned to that tenant. The " "router object in the API is created and owned by the cloud administrator." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml637(para) msgid "" "This model supports assigning public addresses to VMs by using floating IPs; the router maps public " "addresses from the external network to fixed IPs on private networks. Hosts " "without floating IPs can still create outbound connections to the external " "network because the provider router performs SNAT to the router's external " "IP. The IP address of the physical router is used as the " "gateway_ip of the external network subnet, so the " "provider has a default router for Internet traffic." msgstr "" #: ./doc/install-guide/section_neutron-provider-router-with-private_networks.xml648(para) msgid "" "The router provides L3 connectivity among private networks. Tenants can " "reach instances for other tenants (unless you use additional filtering, such" " as, security groups). With a single router, tenant networks cannot use " "overlapping IPs. To resolve this issue, the administrator can create private" " networks on behalf of the tenants." msgstr "" #: ./doc/install-guide/ch_nova.xml7(title) msgid "Configure Compute services" msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml7(title) msgid "Add the Block Storage service agent for Telemetry" msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml10(para) msgid "" "To retrieve volume samples, you must configure the Block Storage service to " "send notifications to the bus." msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml13(para) msgid "" "Edit /etc/cinder/cinder.conf and add in the " "[DEFAULT] section on the controller and volume nodes:" msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml19(para) msgid "Run the following commands on the controller and volume nodes:" msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml26(para) msgid "Restart the Block Storage services with their new settings." msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml28(para) msgid "On the controller node:" msgstr "" #: ./doc/install-guide/section_ceilometer-cinder.xml33(para) msgid "On the volume node:" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml6(title) #: ./doc/install-guide/app_reserved_uids.xml24(caption) msgid "Reserved user IDs" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml8(para) msgid "" "In OpenStack, certain user IDs are reserved and used to run specific " "OpenStack services and own specific OpenStack files. These users are set up " "according to the distribution packages. The following table gives an " "overview." msgstr "" #: ./doc/install-guide/app_reserved_uids.xml16(para) msgid "" "Some OpenStack packages generate and assign user IDs automatically during " "package installation. In these cases, the user ID value is not important. " "The existence of the user ID is what matters." msgstr "" #: ./doc/install-guide/app_reserved_uids.xml27(th) msgid "Name" msgstr "ਨਾਂ" #: ./doc/install-guide/app_reserved_uids.xml29(th) msgid "ID" msgstr "ID" #: ./doc/install-guide/app_reserved_uids.xml35(td) msgid "ceilometer" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml36(td) msgid "OpenStack Ceilometer Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml37(td) msgid "166" msgstr "166" #: ./doc/install-guide/app_reserved_uids.xml38(td) #: ./doc/install-guide/app_reserved_uids.xml44(td) #: ./doc/install-guide/app_reserved_uids.xml50(td) #: ./doc/install-guide/app_reserved_uids.xml56(td) #: ./doc/install-guide/app_reserved_uids.xml62(td) #: ./doc/install-guide/app_reserved_uids.xml68(td) #: ./doc/install-guide/app_reserved_uids.xml75(td) #: ./doc/install-guide/app_reserved_uids.xml81(td) #: ./doc/install-guide/app_reserved_uids.xml87(td) msgid "Assigned during package installation" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml41(td) msgid "cinder" msgstr "cinder" #: ./doc/install-guide/app_reserved_uids.xml42(td) msgid "OpenStack Cinder Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml43(td) msgid "165" msgstr "165" #: ./doc/install-guide/app_reserved_uids.xml47(td) msgid "glance" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml48(td) msgid "OpenStack Glance Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml49(td) msgid "161" msgstr "161" #: ./doc/install-guide/app_reserved_uids.xml53(td) msgid "heat" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml54(td) msgid "OpenStack Heat Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml55(td) msgid "187" msgstr "187" #: ./doc/install-guide/app_reserved_uids.xml59(td) msgid "keystone" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml60(td) msgid "OpenStack Keystone Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml61(td) msgid "163" msgstr "163" #: ./doc/install-guide/app_reserved_uids.xml65(td) msgid "neutron" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml66(td) msgid "OpenStack Neutron Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml67(td) msgid "164" msgstr "164" #: ./doc/install-guide/app_reserved_uids.xml71(td) msgid "nova" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml72(td) msgid "OpenStack Nova Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml73(td) msgid "162" msgstr "162" #: ./doc/install-guide/app_reserved_uids.xml74(td) msgid "96" msgstr "96" #: ./doc/install-guide/app_reserved_uids.xml78(td) msgid "swift" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml79(td) msgid "OpenStack Swift Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml80(td) msgid "160" msgstr "160" #: ./doc/install-guide/app_reserved_uids.xml84(td) msgid "trove" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml85(td) msgid "OpenStack Trove Daemons" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml86(td) msgid "Unknown FIXME" msgstr "" #: ./doc/install-guide/app_reserved_uids.xml91(para) msgid "Each user belongs to a user group with the same name as the user." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml10(para) msgid "" "By default, the system-config-firewall automated firewall" " configuration tool is in place on RHEL. This graphical interface (and a " "curses-style interface with -tui on the end of the name) " "enables you to configure IP tables as a basic firewall. You should disable " "it when you work with Neutron unless you are familiar with the underlying " "network technologies, as, by default, it blocks various types of network " "traffic that are important to Neutron. To disable it, simple launch the " "program and clear the Enabled check box." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml20(para) msgid "" "After you successfully set up OpenStack with Neutron, you can re-enable and " "configure the tool. However, during Neutron set up, disable the tool to make" " it easier to debug network issues." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml27(para) msgid "" "Before you configure individual nodes for Networking, you must create the " "required OpenStack components: user, service, database, and one or more " "endpoints. After you complete these steps on the controller node, follow the" " instructions in this guide to set up OpenStack Networking nodes." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml34(para) msgid "" "Connect to the MySQL database as the root user, create the " "neutron database, and grant the proper access to it:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml45(para) msgid "" "Create the required user, service, and endpoint so that Networking can " "interface with the Identity Service." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml47(para) msgid "Create a neutron user:" msgstr "ਇੱਕ neutron ਵਰਤੋਂਕਾਰ ਬਣਾਉ:" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml49(para) msgid "Add the user role to the neutron user:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml51(para) msgid "Create the neutron service:" msgstr "ਨਿਊਟਰੌਨ ਸੇਵਾ ਬਣਾਉ:" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml54(para) msgid "Create a Networking endpoint:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml63(title) msgid "Install and configure server component" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml65(para) msgid "Install the server component of Networking and any dependencies." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml71(para) #: ./doc/install-guide/section_neutron-single-flat.xml191(para) msgid "Configure Networking to connect to the database:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml76(para) msgid "" "Configure Networking to use your MySQL database. Edit the " "/etc/neutron/neutron.conf file and add the following " "key under the [database] section. Replace " "NEUTRON_DBPASS with the password you chose for " "the Neutron database." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml86(para) msgid "" "Configure Networking to use keystone as the Identity Service for " "authentication:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml91(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml87(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml121(para) msgid "" "Set the auth_strategy configuration key to " "keystone in the DEFAULT section of the" " file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml117(para) msgid "" "Configure Networking to use keystone as the Identity Service for " "authentication." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml122(para) msgid "" "Edit the /etc/neutron/neutron.conf file and add the " "file and add the following key under the [DEFAULT] " "section." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml129(para) msgid "" "Add the following keys under the [keystone_authtoken] " "section. Replace NEUTRON_PASS with the password " "you chose for the Neutron user in Keystone." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml172(para) msgid "" "Configure Networking to use your message broker. Edit the " "/etc/neutron/neutron.conf file and add the following " "keys under the [DEFAULT] section." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml176(para) msgid "" "Replace RABBIT_PASS with the password you chose " "for RabbitMQ." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml186(title) msgid "Install and configure Open vSwitch (OVS) plug-in" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml192(para) msgid "Install the Open vSwitch plug-in:" msgstr "ਇੰਸਟਾਲ Open vSwitch ਪਲੱਗ-ਇਨ:" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml198(para) msgid "" "You must set some common configuration options no matter which networking " "technology you choose to use with Open vSwitch. You must configure " "Networking core to use OVS. Edit the " "/etc/neutron/neutron.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml206(para) msgid "" "The dedicated controller node does not need to run Open vSwitch or the Open " "vSwitch agent." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml211(para) msgid "" "Configure the OVS plug-in to use GRE tunneling. Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml224(para) msgid "" "Configure Compute to use OpenStack Networking services. Configure the " "/etc/nova/nova.conf file as per instructions below:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml248(para) msgid "" "Configure Compute to use OpenStack Networking services. Edit the " "/etc/nova/nova.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml264(para) msgid "" "Regardless of which firewall driver you chose when you configured the " "network and compute nodes, set this driver as the No-Op firewall. This " "firewall is a nova firewall, and " "because neutron handles the " "Firewall, you must tell nova not " "to use one." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml271(para) msgid "" "When Networking handles the firewall, the option " "firewall_driver should be set according to the specified plug-" "in. For example with OVS, edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml285(para) msgid "" "If you do not want to use a firewall in Compute or Networking, set " "firewall_driver=nova.virt.firewall.NoopFirewallDriver in both " "config files, and comment out or remove " "security_group_api=neutron in the " "/etc/nova/nova.conf file, otherwise you may encounter " "ERROR: The server has either erred or is incapable of performing " "the requested operation. (HTTP 500) when issuing " " commands." msgstr "" #: ./doc/install-guide/section_neutron-ovs-controller-node.xml326(para) msgid "Restart the Compute and Networking services:" msgstr "" #: ./doc/install-guide/section_basics-ntp.xml6(title) msgid "Network Time Protocol (NTP)" msgstr "ਸੰਜਾਲ ਸਮਾਂ ਜਾਬਤਾ (NTP)" #: ./doc/install-guide/section_basics-ntp.xml7(para) msgid "" "To synchronize services across multiple machines, you must install " "NTP. The " "examples in this guide configure the controller node as the reference server" " and any additional nodes to set their time from the controller node." msgstr "" #: ./doc/install-guide/section_basics-ntp.xml12(para) msgid "" "Install the ntp package on each system running OpenStack " "services:" msgstr "" #: ./doc/install-guide/section_basics-ntp.xml17(para) msgid "" "Set up the NTP server on your controller node so that it receives data by " "modifying the ntp.conf file and restarting the service:" msgstr "" #: ./doc/install-guide/section_basics-ntp.xml25(para) msgid "" "It is advised that you configure additional nodes to synchronize their time " "from the controller node rather than from outside of your LAN. To do so, " "install the ntp daemon as above, then edit " "/etc/ntp.conf and change the server " "directive to use the controller node as internet time source." msgstr "" #: ./doc/install-guide/section_ceilometer-glance.xml6(title) msgid "Configure the Image Service for Telemetry" msgstr "" #: ./doc/install-guide/section_ceilometer-glance.xml9(para) msgid "" "To retrieve image samples, you must configure the Image Service to send " "notifications to the bus." msgstr "" #: ./doc/install-guide/section_ceilometer-glance.xml12(para) msgid "" "Edit /etc/glance/glance-api.conf and modify the " "[DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-glance.xml31(para) msgid "Restart the Image Services with their new settings:" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_basics-networking-nova.xml25(None) #: ./doc/install-guide/ch_overview.xml147(None) msgid "" "@@image: 'figures/installguide_arch-nova.png'; " "md5=da24b356516c960a33ab2b4b72840774" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml7(para) msgid "" "The example architecture with legacy networking (nova-network) requires a " "controller node and at least one compute node. The controller node contains " "one network interface on the management network. The " "compute node contains one network interface on the management network and " "one on the external network." msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml14(para) msgid "" "Network interface names vary by distribution. Traditionally, interfaces use " "\"eth\" followed by a sequential number. To cover all variations, this guide" " simply refers to the first interface as the interface with the lowest " "number and the second interface as the interface with the highest number." msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml21(title) #: ./doc/install-guide/ch_overview.xml143(title) msgid "Two-node architecture with legacy networking (nova-network)" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml29(para) #: ./doc/install-guide/section_basics-networking-neutron.xml33(para) msgid "" "Unless you intend to use the exact configuration provided in this example " "architecture, you must modify the networks in this procedure to match your " "environment. Also, each node must resolve the other nodes by name in " "addition to IP address. For example, the " "controller name must resolve to " "10.0.0.11, the IP address of the management interface on " "the controller node." msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml37(para) #: ./doc/install-guide/section_basics-networking-neutron.xml41(para) msgid "" "Reconfiguring network interfaces will interrupt network connectivity. We " "recommend using a local terminal session for these procedures." msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml44(title) #: ./doc/install-guide/section_basics-networking-nova.xml72(title) #: ./doc/install-guide/section_basics-networking-neutron.xml48(title) #: ./doc/install-guide/section_basics-networking-neutron.xml79(title) #: ./doc/install-guide/section_basics-networking-neutron.xml158(title) msgid "To configure networking:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml46(para) #: ./doc/install-guide/section_basics-networking-nova.xml74(para) #: ./doc/install-guide/section_basics-networking-neutron.xml50(para) #: ./doc/install-guide/section_basics-networking-neutron.xml81(para) #: ./doc/install-guide/section_basics-networking-neutron.xml160(para) msgid "Configure the first interface as the management interface:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml47(para) #: ./doc/install-guide/section_basics-networking-neutron.xml51(para) msgid "IP address: 10.0.0.11" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml48(para) #: ./doc/install-guide/section_basics-networking-nova.xml76(para) #: ./doc/install-guide/section_basics-networking-neutron.xml52(para) #: ./doc/install-guide/section_basics-networking-neutron.xml83(para) #: ./doc/install-guide/section_basics-networking-neutron.xml90(para) #: ./doc/install-guide/section_basics-networking-neutron.xml162(para) #: ./doc/install-guide/section_basics-networking-neutron.xml173(para) msgid "Network mask: 255.255.255.0 (or /24)" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml49(para) #: ./doc/install-guide/section_basics-networking-nova.xml77(para) #: ./doc/install-guide/section_basics-networking-neutron.xml53(para) #: ./doc/install-guide/section_basics-networking-neutron.xml84(para) #: ./doc/install-guide/section_basics-networking-neutron.xml163(para) msgid "Default gateway: 10.0.0.1" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml53(title) #: ./doc/install-guide/section_basics-networking-nova.xml127(title) #: ./doc/install-guide/section_basics-networking-neutron.xml57(title) #: ./doc/install-guide/section_basics-networking-neutron.xml136(title) #: ./doc/install-guide/section_basics-networking-neutron.xml181(title) msgid "To configure name resolution:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml55(para) #: ./doc/install-guide/section_basics-networking-nova.xml129(para) #: ./doc/install-guide/section_basics-networking-neutron.xml59(para) #: ./doc/install-guide/section_basics-networking-neutron.xml138(para) #: ./doc/install-guide/section_basics-networking-neutron.xml183(para) msgid "" "Edit the /etc/hosts file to contain the following:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml63(para) #: ./doc/install-guide/section_basics-networking-nova.xml137(para) #: ./doc/install-guide/section_basics-networking-neutron.xml70(para) #: ./doc/install-guide/section_basics-networking-neutron.xml149(para) #: ./doc/install-guide/section_basics-networking-neutron.xml194(para) msgid "" "You must remove or comment the line beginning with " "127.0.1.1." msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml75(para) #: ./doc/install-guide/section_basics-networking-neutron.xml161(para) msgid "IP address: 10.0.0.31" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml79(para) #: ./doc/install-guide/section_basics-networking-neutron.xml165(para) msgid "Additional compute nodes should use 10.0.0.32, 10.0.0.33, and so on." msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml84(para) msgid "" "The external interface uses a special configuration without an IP address " "assigned to it. Configure the second interface as the external interface:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml87(para) msgid "" "Replace INTERFACE_NAME with the actual interface " "name. For example, eth1 or ens224." msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml92(para) #: ./doc/install-guide/section_basics-networking-neutron.xml101(para) msgid "" "Edit the /etc/network/interfaces file to contain the " "following:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml101(para) #: ./doc/install-guide/section_basics-networking-neutron.xml110(para) msgid "" "Edit the /etc/sysconfig/network-" "scripts/ifcfg-INTERFACE_NAME file to " "contain the following:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml104(para) #: ./doc/install-guide/section_basics-networking-neutron.xml113(para) msgid "" "Do not change the HWADDR and UUID " "keys." msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml112(para) #: ./doc/install-guide/section_basics-networking-neutron.xml121(para) msgid "" "Edit the " "/etc/sysconfig/network/ifcfg-INTERFACE_NAME" " file to contain the following:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml121(para) #: ./doc/install-guide/section_basics-networking-neutron.xml130(para) msgid "Restart networking:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml144(title) #: ./doc/install-guide/section_basics-networking-neutron.xml201(title) #: ./doc/install-guide/section_neutron-initial-networks.xml230(title) msgid "Verify connectivity" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml145(para) #: ./doc/install-guide/section_basics-networking-neutron.xml202(para) msgid "" "We recommend that you verify network connectivity to the internet and among " "the nodes before proceeding further." msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml149(para) #: ./doc/install-guide/section_basics-networking-neutron.xml206(para) msgid "" "From the controller node, a site on " "the internet:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml163(para) #: ./doc/install-guide/section_basics-networking-neutron.xml235(para) msgid "" "From the controller node, the " "management interface on the compute node:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml166(replaceable) #: ./doc/install-guide/section_basics-networking-neutron.xml238(replaceable) msgid "compute1" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml178(para) #: ./doc/install-guide/section_basics-networking-neutron.xml294(para) msgid "" "From the compute node, a site on the " "internet:" msgstr "" #: ./doc/install-guide/section_basics-networking-nova.xml192(para) #: ./doc/install-guide/section_basics-networking-neutron.xml308(para) msgid "" "From the compute node, the management " "interface on the controller node:" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_basics-networking-neutron.xml29(None) #: ./doc/install-guide/ch_overview.xml98(None) msgid "" "@@image: 'figures/installguide_arch-neutron.png'; " "md5=9b3d2f2e5f9d88d198511ecbca829c6d" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml7(para) msgid "" "The example architecture with OpenStack Networking (neutron) requires one " "controller node, one network node, and at least one compute node. The " "controller node contains one network interface on the management " "network. The network node contains one network interface on the " "management network, one on the instance tunnels " "network, and one on the external network." " The compute node contains one network interface on the management network " "and one on the instance tunnels network." msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml17(para) msgid "" "Network interface names vary by distribution. Traditionally, interfaces use " "\"eth\" followed by a sequential number. To cover all variations, this guide" " simply refers to the first interface as the interface with the lowest " "number, the second interface as the interface with the middle number, and " "the third interface as the interface with the highest number." msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml25(title) #: ./doc/install-guide/ch_overview.xml94(title) msgid "Three-node architecture with OpenStack Networking (neutron)" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml82(para) msgid "IP address: 10.0.0.21" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml87(para) #: ./doc/install-guide/section_basics-networking-neutron.xml170(para) msgid "Configure the second interface as the instance tunnels interface:" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml89(para) msgid "IP address: 10.0.1.21" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml93(para) msgid "" "The external interface uses a special configuration without an IP address " "assigned to it. Configure the third interface as the external interface:" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml96(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml460(para) msgid "" "Replace INTERFACE_NAME with the actual interface " "name. For example, eth2 or ens256." msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml172(para) msgid "IP address: 10.0.1.31" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml175(para) msgid "Additional compute nodes should use 10.0.1.32, 10.0.1.33, and so on." msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml220(para) msgid "" "From the controller node, the " "management interface on the network node:" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml223(replaceable) msgid "network" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml250(para) msgid "" "From the network node, a site on the " "internet:" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml264(para) msgid "" "From the network node, the management " "interface on the controller node:" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml279(para) msgid "" "From the network node, the instance " "tunnels interface on the compute node:" msgstr "" #: ./doc/install-guide/section_basics-networking-neutron.xml323(para) msgid "" "From the compute node, the instance " "tunnels interface on the network node:" msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml6(title) #: ./doc/install-guide/object-storage/section_object-storage-install.xml28(title) msgid "Before you begin" msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml7(para) msgid "" "For a functional environment, OpenStack doesn't require a significant amount" " of resources. We recommend that your environment meets or exceeds the " "following minimum requirements which can support several minimal " "CirrOS instances:" msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml13(para) msgid "Controller Node: 1 processor, 2 GB memory, and 5 GB storage" msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml17(para) msgid "Network Node: 1 processor, 512 MB memory, and 5 GB storage" msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml21(para) msgid "Compute Node: 1 processor, 2 GB memory, and 10 GB storage" msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml25(para) msgid "" "To minimize clutter and provide more resources for OpenStack, we recommend a" " minimal installation of your Linux distribution. Also, we strongly " "recommend that you install a 64-bit version of your distribution on at least" " the compute node. If you install a 32-bit version of your distribution on " "the compute node, attempting to start an instance using a 64-bit image will " "fail." msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml32(para) msgid "" "A single disk partition on each node works for most basic installations. " "However, you should consider Logical Volume Manager " "(LVM) for installations with optional services such as Block " "Storage." msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml37(para) msgid "" "Many users build their test environments on virtual machines (VMs). The primary benefits of " "VMs include the following:" msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml43(para) msgid "" "One physical server can support multiple nodes, each with almost any number " "of network interfaces." msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml47(para) msgid "" "Ability to take periodic \"snap shots\" throughout the installation process " "and \"roll back\" to a working configuration in the event of a problem." msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml52(para) msgid "" "However, VMs will reduce performance of your instances, particularly if your" " hypervisor and/or processor lacks support for hardware acceleration of " "nested VMs." msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml56(para) msgid "" "If you choose to install on VMs, make sure your hypervisor permits " "promiscuous mode on the external " "network." msgstr "" #: ./doc/install-guide/section_basics-prerequisites.xml60(para) msgid "" "For more information about system requirements, see the OpenStack Operations Guide." msgstr "" #: ./doc/install-guide/ch_trove.xml6(title) msgid "Add the Database service" msgstr "" #: ./doc/install-guide/ch_trove.xml7(para) msgid "" "Use the Database module" " to create cloud database resources. The integrated project name is " "trove." msgstr "" #: ./doc/install-guide/ch_trove.xml10(para) msgid "" "This chapter is a work in progress. It may contain incorrect information, " "and will be updated frequently." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml8(title) #: ./doc/install-guide/section_neutron-ml2-network-node.xml8(title) msgid "Configure network node" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml10(para) msgid "" "Before you start, set up a machine as a dedicated network node. Dedicated " "network nodes have a MGMT_INTERFACE NIC, a " "DATA_INTERFACE NIC, and an " "EXTERNAL_INTERFACE NIC." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml15(para) msgid "" "The management network handles communication among nodes. The data network " "handles communication coming to and from VMs. The external NIC connects the " "network node, and optionally to the controller node, so your VMs can connect" " to the outside world." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml22(para) msgid "" "By default, the system-config-firewall automated firewall" " configuration tool is in place on RHEL. This graphical interface (and a " "curses-style interface with -tui on the end of the name) " "enables you to configure IP tables as a basic firewall. You should disable " "it when you work with Networking unless you are familiar with the underlying" " network technologies. By default, it blocks various types of network " "traffic that are important to Networking. To disable it, simply launch the " "program and clear the Enabled check box." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml31(para) msgid "" "After you successfully set up OpenStack Networking, you can re-enable and " "configure the tool. However, during Networking set up, disable the tool to " "make it easier to debug network issues." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml37(title) msgid "Install agents and configure common components" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml39(para) msgid "Install the Networking packages and any dependencies." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml47(para) msgid "" "Respond to prompts for database " "management, [keystone_authtoken] " "settings, RabbitMQ " "credentials and API " "endpoint registration." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml58(para) msgid "Configure Networking agents to start at boot time:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml63(para) msgid "" "Enable packet forwarding and disable packet destination filtering so that " "the network node can coordinate traffic for the VMs. Edit the " "/etc/sysctl.conf file, as follows:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml70(para) msgid "" "Use the command to ensure the changes made to the " "/etc/sysctl.conf file take effect:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml75(para) msgid "" "It is recommended that the networking service is restarted after changing " "values related to the networking configuration. This ensures that all " "modified values take effect immediately:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml154(para) msgid "" "Configure the RabbitMQ access. Edit the " "/etc/neutron/neutron.conf file to modify the following " "parameters in the DEFAULT section." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml177(title) msgid "Install and configure the Open vSwitch (OVS) plug-in" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml190(para) msgid "Start Open vSwitch:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml194(para) msgid "And configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml200(para) msgid "" "No matter which networking technology you use, you must add the br-" "int integration bridge, which connects to the VMs, and the " "br-ex external bridge, which connects to the outside " "world." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml209(para) msgid "" "Add a port (connection) from the " "EXTERNAL_INTERFACE interface to br-" "ex interface:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml212(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml222(replaceable) msgid "EXTERNAL_INTERFACE" msgstr "EXTERNAL_INTERFACE" #: ./doc/install-guide/section_neutron-ovs-network-node.xml214(para) msgid "" "The host must have an IP address associated with an interface other than " "EXTERNAL_INTERFACE, and your remote terminal " "session must be associated with this other IP address." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml219(para) msgid "" "If you associate an IP address with " "EXTERNAL_INTERFACE, that IP address stops working" " after you issue the command. If you associate a remote " "terminal session with that IP address, you lose connectivity with the host." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml225(para) msgid "" "For more details about this behavior, see the Configuration " "Problems section of the Open vSwitch " "FAQ." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml231(para) msgid "" "Configure the EXTERNAL_INTERFACE without an IP " "address and in promiscuous mode. Additionally, you must set the newly " "created br-ex interface to have the IP address that " "formerly belonged to EXTERNAL_INTERFACE." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml238(para) msgid "" "Generic Receive Offload (GRO) should not be enabled on this interface as it " "can cause severe performance problems. It can be disabled with the ethtool " "utility." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml243(para) msgid "" "Edit the /etc/sysconfig/network-scripts/ifcfg-" "EXTERNAL_INTERFACE file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml252(para) msgid "" "Create and edit the /etc/sysconfig/network-scripts/ifcfg-br-" "ex file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml264(para) msgid "" "You must set some common configuration options no matter which networking " "technology you choose to use with Open vSwitch. Configure the L3 and DHCP " "agents to use OVS and namespaces. Edit the " "/etc/neutron/l3_agent.ini and " "/etc/neutron/dhcp_agent.ini files, respectively:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml274(para) msgid "" "While the examples in this guide enable network namespaces by default, you " "can disable them if issues occur or your kernel does not support them. Edit " "the /etc/neutron/l3_agent.ini and " "/etc/neutron/dhcp_agent.ini files, respectively:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml281(para) msgid "" "Edit the /etc/neutron/neutron.conf file to disable " "overlapping IP addresses:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml284(para) msgid "" "Note that when network namespaces are disabled, you can have only one router" " for each network node and overlapping IP addresses are not supported." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml287(para) msgid "" "You must complete additional steps after you create the initial Neutron " "virtual networks and router." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml293(para) msgid "" "Similarly, you must also tell Neutron core to use OVS. " "Edit the /etc/neutron/neutron.conf file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml300(para) msgid "" "Configure a firewall plug-in. If you do not wish to enforce firewall rules, " "called security groups by" " OpenStack, you can use " "neutron.agent.firewall.NoopFirewall. Otherwise, you can " "choose one of the Networking firewall plug-ins. The most common choice is " "the Hybrid OVS-IPTables driver, but you can also use the Firewall-" "as-a-Service driver. Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml327(para) msgid "" "Configure the OVS plug-in to use GRE tunneling, the " "br-int integration bridge, the br-tun " "tunneling bridge, and a local IP for the " "DATA_INTERFACE tunnel IP. Edit the " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml346(title) msgid "Configure the agents" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml348(para) msgid "" "To perform DHCP on the software-defined networks, Networking supports " "several different plug-ins. However, in general, you use the " "dnsmasq plug-in." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml351(para) msgid "Configure the /etc/neutron/dhcp_agent.ini file:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml359(para) msgid "" "To allow virtual machines to access the Compute metadata information, the " "Networking metadata agent must be enabled and configured. The agent will act" " as a proxy for the Compute metadata service." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml363(para) msgid "" "On the controller, edit the /etc/nova/nova.conf file to" " define a secret key that will be shared between the Compute service and the" " Networking metadata agent." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml367(para) msgid "Add to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml371(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml377(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml397(replaceable) #: ./doc/install-guide/section_neutron-ovs-network-node.xml413(replaceable) msgid "METADATA_PASS" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml373(para) msgid "Set the neutron_metadata_proxy_shared_secret key:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml380(para) msgid "Restart the nova-api service:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml384(para) msgid "On the network node, modify the metadata agent configuration." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml386(para) msgid "" "Edit the /etc/neutron/metadata_agent.ini file and " "modify the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml398(para) #: ./doc/install-guide/section_neutron-ovs-network-node.xml428(para) msgid "Set the required keys:" msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml415(para) msgid "" "The value of auth_region is case-sensitive and must match" " the endpoint region defined in Keystone." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml420(para) msgid "" "If you serve the OpenStack Networking API over HTTPS with self-signed " "certificates, you must perform additional configuration for the metadata " "agent because Networking cannot validate the SSL certificates from the " "service catalog." msgstr "" #: ./doc/install-guide/section_neutron-ovs-network-node.xml424(para) msgid "Add this statement to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_nova-networking-controller-node.xml6(para) msgid "" "Legacy networking primarily involves compute nodes. However, you must " "configure the controller node to use it." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml7(title) msgid "debconf concepts" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml8(para) msgid "" "This chapter explains how to use the Debian debconf and dbconfig-common packages to configure OpenStack services. " "These packages enable users to perform configuration tasks. When users " "install OpenStack packages, debconf prompts the user for " "responses, which seed the contents of configuration files associated with " "that package. After package installation, users can update the configuration" " of a package by using the program." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml18(para) msgid "" "If you are familiar with these packages and pre-seeding, you can proceed to " "." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml21(title) msgid "The Debian packages" msgstr "Debian ਪੰਡਾਂ (ਪੈਕੇਜ)" #: ./doc/install-guide/section_debconf-concepts.xml22(para) msgid "" "The rules described here are from the Debian Policy Manual. If any" " rule described in this chapter is not respected, you have found a serious " "bug that must be fixed." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml27(para) msgid "" "When you install or upgrade a Debian package, all configuration file values " "are preserved. Using the debconf " "database as a registry is considered a bug in Debian. If you edit something " "in any OpenStack configuration file, the debconf package reads that value when it " "prepares to prompt the user. For example, to change the log in name for the " "RabbitMQ messaging queue for a service, you can edit its value in the " "corresponding configuration file." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml36(para) msgid "" "To opt out of using the debconf " "package, run the command and select non-interactive mode:" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml41(para) msgid "" "Then, debconf does not prompt " "you." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml43(para) msgid "" "Another way to disable the debconf package is to prefix the " " command with " "DEBIAN_FRONTEND=noninteractive, as follows:" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml49(para) msgid "" "If you configure a package with debconf incorrectly, you can re-configure it," " as follows:" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml52(replaceable) msgid "PACKAGE-NAME" msgstr "PACKAGE-NAME" #: ./doc/install-guide/section_debconf-concepts.xml53(para) msgid "" "This calls the post-installation script for the PACKAGE-" "NAME package after the user responds to all prompts. If you " "cannot install a Debian package in a non-interactive way, you have found a " "release-critical bug in Debian. Report it to the Debian bug tracking system." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml58(para) msgid "" "Generally, the -common packages " "install the configuration files. For example, the glance-" "common package installs the glance-api.conf " "and glance-registry.conf files. So, for the Image " "Service, you must re-configure the glance-common package." " The same applies for cinder-common, nova-" "common, and heat-common packages." msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml68(para) msgid "" "In debconf, the higher the " "priority for a screen, the greater the chance that the user sees that " "screen. If a debconf screen has " "medium priority and you configure the Debian system to " "show only critical prompts, which is the default in " "Debian, the user does not see that debconf screen. Instead, the default for the " "related package is used. In the Debian OpenStack packages, a number of " "debconf screens are set with " "medium priority. Consequently, if you want to respond to " "all debconf screens from the " "Debian OpenStack packages, you must run the following command and select the" " medium priority before you install any packages:" msgstr "" #: ./doc/install-guide/section_debconf-concepts.xml87(para) msgid "" "The packages do not require pre-depends. If dbconfig-common is already installed on the system, the user" " sees all prompts. However, you cannot define the order in which the " "debconf screens appear. The user " "must make sense of it even if the prompts appear in an illogical order." msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml6(title) msgid "Configure the Object Storage service for Telemetry" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml9(para) msgid "" "To retrieve object store statistics, the Telemetry service needs access to " "Object Storage with the ResellerAdmin role. Give this " "role to your os_username user for the " "os_tenant_name tenant:" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml23(replaceable) msgid "462fa46c13fd4798a95a3bfbe27b5e54" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml26(para) msgid "" "You must also add the Telemetry middleware to Object Storage to handle " "incoming and outgoing traffic. Add these lines to the /etc/swift" "/proxy-server.conf file:" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml35(para) msgid "" "Add ceilometer to the pipeline " "parameter of that same file:" msgstr "" #: ./doc/install-guide/section_ceilometer-swift.xml41(para) #: ./doc/install-guide/section_heat-install.xml180(para) #: ./doc/install-guide/section_ceilometer-nova.xml137(para) msgid "Restart the service with its new settings:" msgstr "" #: ./doc/install-guide/section_debconf-preseeding.xml6(title) msgid "Pre-seed debconf prompts" msgstr "" #: ./doc/install-guide/section_debconf-preseeding.xml7(para) msgid "" "You can pre-seed all debconf " "prompts. To pre-seed means to store responses in the " "debconf database so that debconf does " "not prompt the user for responses. Pre-seeding enables a hands-free " "installation for users. The package maintainer creates scripts that " "automatically configure the services." msgstr "" #: ./doc/install-guide/section_debconf-preseeding.xml14(para) msgid "" "The following example shows how to pre-seed an automated MySQL Server " "installation:" msgstr "" #: ./doc/install-guide/section_debconf-preseeding.xml16(replaceable) #: ./doc/install-guide/section_debconf-preseeding.xml17(replaceable) #: ./doc/install-guide/section_debconf-preseeding.xml19(replaceable) msgid "MYSQL_PASSWORD" msgstr "MYSQL_PASSWORD" #: ./doc/install-guide/section_debconf-preseeding.xml23(para) msgid "" "The seen true option tells debconf that a " "specified screen was already seen by the user so do not show it again. This " "option is useful for upgrades." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-single-flat.xml22(None) msgid "" "@@image: '../common/figures/demo_flat_install.png'; " "md5=27b45d5871859ff4951c92df7c8763d8" msgstr "@@image: '../common/figures/demo_flat_install.png'; md5=27b45d5871859ff4951c92df7c8763d8" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-single-flat.xml623(None) msgid "" "@@image: '../common/figures/UseCase-SingleFlat.png'; " "md5=bdd61f2967fb1a55e4f50d766db7b113" msgstr "@@image: '../common/figures/UseCase-SingleFlat.png'; md5=bdd61f2967fb1a55e4f50d766db7b113" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-single-flat.xml639(None) msgid "" "@@image: '../common/figures/UseCase-MultiFlat.png'; " "md5=289e38a7a13a2a4413e5a1e62ce55b3e" msgstr "@@image: '../common/figures/UseCase-MultiFlat.png'; md5=289e38a7a13a2a4413e5a1e62ce55b3e" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-single-flat.xml661(None) msgid "" "@@image: '../common/figures/UseCase-MixedFlatPrivate.png'; " "md5=8da4ceb5a1e5a2357394478645af7449" msgstr "@@image: '../common/figures/UseCase-MixedFlatPrivate.png'; md5=8da4ceb5a1e5a2357394478645af7449" #: ./doc/install-guide/section_neutron-single-flat.xml6(title) msgid "Single flat network" msgstr "ਇਕਹਿਰਾ ਸਮਤਲ ਨੈੱਟਵਰਕ" #: ./doc/install-guide/section_neutron-single-flat.xml7(para) msgid "" "This section describes how to install the OpenStack Networking service and " "its components for a single flat network use case." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml10(para) msgid "" "The following diagram shows the set up. For simplicity, all nodes should " "have one interface for management traffic and one or more interfaces for " "traffic to and from VMs. The management network is 100.1.1.0/24 with " "controller node at 100.1.1.2. The example uses the Open vSwitch plug-in and " "agent." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml16(para) msgid "" "You can modify this set up to make use of another supported plug-in and its " "agent." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml25(para) msgid "The following table describes some nodes in the set up:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml39(para) msgid "" "Runs the Networking service, Identity Service, and Compute services that are" " required to deploy VMs (nova-" "api, nova-scheduler," " for example). The node must have at least one network interface, which is " "connected to the Management Network. The host name is " "controller, which every other node resolves to the IP of " "the controller node." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml52(para) msgid "" "The nova-network service should " "not be running. This is replaced by the OpenStack Networking component, " "neutron. To delete a network, run" " this command:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml64(para) msgid "" "Note that a network must first be disassociated from a project using the " "nova network-disassociate command before it can be deleted." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml71(td) msgid "" "Runs the Networking L2 agent and the Compute services that run VMs " "( specifically, and optionally other nova-* services " "depending on configuration). The node must have at least two network " "interfaces. The first communicates with the controller node through the " "management network. The second interface handles the VM traffic on the data " "network. The VM can receive its IP address from the DHCP agent on this " "network." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml85(td) msgid "" "Runs Networking L2 agent and the DHCP agent. The DHCP agent allocates IP " "addresses to the VMs on the network. The node must have at least two network" " interfaces. The first communicates with the controller node through the " "management network. The second interface handles the VM traffic on the data " "network." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml101(para) msgid "The demo assumes the following prerequisites:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml109(para) msgid "" "Glance is installed, configured, and running. Additionally, an image must be" " available." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml113(para) msgid "" "OpenStack Identity is installed, configured, and running. A Networking user " "neutron is in place on tenant service with password " "NEUTRON_PASS." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml121(para) msgid "Additional services:" msgstr "ਵਧੀਕ ਸੇਵਾਵਾਂ:" #: ./doc/install-guide/section_neutron-single-flat.xml124(para) msgid "" "RabbitMQ is running with the default guest user and password " "RABBIT_PASS." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml129(para) msgid "Qpid is running with the default guest user and password." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml142(para) msgid "Compute is installed and configured." msgstr "ਮੁਲ-ਆਂਕਣ ਇੰਸਟਾਲ ਅਤੇ ਸੰਰਚਿਤ ਹੋ ਚੁੱਕਾ ਹੈ।" #: ./doc/install-guide/section_neutron-single-flat.xml155(para) msgid "" "Install the Networking server and respond to debconf prompts to configure the database, " "the keystone_authtoken, and the RabbitMQ credentials." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml162(para) msgid "" "See for installation " "instructions." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml171(para) msgid "" "See for database creation details." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml177(para) msgid "" "If not already configured, update the Networking " "/etc/neutron/neutron.conf configuration file to use the Identity " "Service, the plug-in, and database configuration:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml194(para) #: ./doc/install-guide/section_neutron-single-flat.xml349(para) msgid "Configure Networking to use your chosen plug-in:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml221(para) msgid "" "If not already configured, update the Networking " "/etc/neutron/neutron.conf configuration file to choose a plug-in " "and Identity Service user as necessary:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml243(para) msgid "" "Update the plug-in " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini " "configuration file with the bridge mappings:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml267(para) msgid "" "Install the nova-compute service." msgstr "nova-compute ਸੇਵਾ ਇੰਸਟਾਲ ਕਰੋ।" #: ./doc/install-guide/section_neutron-single-flat.xml271(para) msgid "See for installation instructions." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml276(para) msgid "" "Update the Compute /etc/nova/nova.conf configuration " "file to make use of OpenStack Networking:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml304(para) msgid "Restart the Compute services" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml311(emphasis) msgid "Compute and Network node - L2 agent" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml314(para) msgid "" "Install and start Open vSwitch. Then, configure neutron accordingly." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml323(para) msgid "Add the integration bridge to Open vSwitch:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml328(para) #: ./doc/install-guide/section_neutron-single-flat.xml420(para) msgid "" "Update the Networking /etc/neutron/neutron.conf " "configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml343(para) msgid "" "If not already configured, update the Networking " "/etc/neutron/neutron.conf configuration file to use the plug-in, " "message queue, and database configuration:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml376(para) msgid "" "Update the plug-in " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini " "configuration file:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml390(para) msgid "" "Create a symbolic link from /etc/neutron/plugin.ini to " "/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini" " or neutron-server will not run:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml395(para) msgid "" "Create the br-eth0 network bridge to " "handle communication between nodes using eth0:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml403(para) msgid "Restart the OpenStack Networking L2 agent:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml415(para) msgid "" "See for generic installation instructions." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml431(para) msgid "" "If not already configured, update the Networking " "/etc/neutron/neutron.conf configuration file to use the plug-in " "and message queue." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml460(para) msgid "" "Ensure that the DHCP agent is using the correct plug-in my changing the " "configuration in /etc/neutron/dhcp_agent.ini:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml468(para) msgid "Restart the DHCP agent:" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml478(para) msgid "Use the following commands on the network node." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml504(para) msgid "Get the user information:" msgstr "ਵਰਤੋਂਕਾਰ ਜਾਣਕਾਰੀ ਪ੍ਰਾਪਤ ਕਰੋ:" #: ./doc/install-guide/section_neutron-single-flat.xml517(para) msgid "" "Create a internal shared network on the demo tenant ($TENANT_ID is " "b7445f221cda4f4a8ac7db6b218b1339):" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml540(para) msgid "Create a subnet on the network:" msgstr "ਸੰਜਾਲ ਉੱਤੇ ਇੱਕ ਸਬ-ਨੈੱਟ ਬਣਾਉ:" #: ./doc/install-guide/section_neutron-single-flat.xml560(para) msgid "Create a server for tenant A:" msgstr "tenant A ਲਈ ਸਰਵਰ ਬਣਾਉ:" #: ./doc/install-guide/section_neutron-single-flat.xml573(para) msgid "Ping the server of tenant A:" msgstr "tenant A ਦੇ ਸਰਵਰ ਨੂੰ ਪਿੰਗ ਕਰੋ:" #: ./doc/install-guide/section_neutron-single-flat.xml579(para) msgid "Ping the public network within the server of tenant A:" msgstr "tenant A ਦੇ ਸਰਵਰ ਦੇ ਅੰਦਰੋ-ਅੰਦਰੀ ਜਨਤਕ ਨੈੱਟਵਰਕ ਨੂੰ ਪਿੰਗ ਕਰੋ:" #: ./doc/install-guide/section_neutron-single-flat.xml591(para) msgid "" "The 192.168.1.1 is an IP on public network to which the router connects." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml596(para) msgid "" "Create servers for other tenants with similar commands. Because all VMs " "share the same subnet, they can access each other." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml603(title) msgid "Use case: single flat network" msgstr "ਵਰਤੋਂ ਮਾਮਲਾ: ਇਕਹਿਰਾ ਸਮਤਲ ਨੈੱਟਵਰਕ" #: ./doc/install-guide/section_neutron-single-flat.xml604(para) msgid "" "The simplest use case is a single network. This is a \"shared\" network, " "meaning it is visible to all tenants via the Networking API. Tenant VMs have" " a single NIC, and receive a fixed IP address from the subnet(s) associated " "with that network. This use case essentially maps to the FlatManager and " "FlatDHCPManager models provided by Compute. Floating IPs are not supported." msgstr "ਵਰਤੋਂ ਮਾਮਲਾ: ਬਹੁਤੇ ਸਮਤਲ ਨੈੱਟਵਰਕ" #: ./doc/install-guide/section_neutron-single-flat.xml611(para) msgid "" "This network type is often created by the OpenStack administrator to map " "directly to an existing physical network in the data center (called a " "\"provider network\"). This allows the provider to use a physical router on " "that data center network as the gateway for VMs to reach the outside world. " "For each subnet on an external network, the gateway configuration on the " "physical router must be manually configured outside of OpenStack." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml630(title) msgid "Use case: multiple flat network" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml631(para) msgid "" "This use case is similar to the above single flat network use case, except " "that tenants can see multiple shared networks via the Networking API and can" " choose which network (or networks) to plug into." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml645(title) msgid "Use case: mixed flat and private network" msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml646(para) msgid "" "This use case is an extension of the above Flat Network use cases. In " "addition to being able to see one or more shared networks via the OpenStack " "Networking API, tenants can also have access to private per-tenant networks " "(only visible to tenant users)." msgstr "" #: ./doc/install-guide/section_neutron-single-flat.xml651(para) msgid "" "Created VMs can have NICs on any of the shared or private networks that the " "tenant owns. This enables the creation of multi-tier topologies that use VMs" " with multiple NICs. It also enables a VM to act as a gateway so that it can" " provide services such as routing, NAT, and load balancing." msgstr "" #: ./doc/install-guide/ch_basics.xml5(title) msgid "Basic environment configuration" msgstr "" #: ./doc/install-guide/ch_basics.xml6(para) msgid "" "This chapter explains how to configure each node in the example architectures " "including the " " two-node architecture with legacy networking and three-node architecture " "with OpenStack Networking (neutron)." msgstr "" #: ./doc/install-guide/ch_basics.xml13(para) msgid "" "Although most environments include OpenStack Identity, Image Service, " "Compute, at least one networking service, and the dashboard, OpenStack " "Object Storage can operate independently of most other services. If your use" " case only involves Object Storage, you can skip to . However, the dashboard will not work " "without at least OpenStack Image Service and Compute." msgstr "" #: ./doc/install-guide/ch_basics.xml22(para) msgid "" "You must use an account with administrative privileges to configure each " "node. Either run the commands as the root user or " "configure the sudo utility." msgstr "" #: ./doc/install-guide/section_cinder-node.xml6(title) msgid "Configure a Block Storage service node" msgstr "" #: ./doc/install-guide/section_cinder-node.xml7(para) msgid "" "After you configure the services on the controller node, configure a second " "system to be a Block Storage service node. This node contains the disk that " "serves volumes." msgstr "" #: ./doc/install-guide/section_cinder-node.xml10(para) #: ./doc/install-guide/section_cinder-controller.xml16(para) msgid "" "You can configure OpenStack to use various storage systems. This example " "uses LVM." msgstr "" #: ./doc/install-guide/section_cinder-node.xml14(para) msgid "" "Use the instructions in to configure the " "system. Note the following differences from the installation instructions " "for the controller node:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml19(para) msgid "" "Set the host name to block1 and use " "10.0.0.41 as IP address on the management network " "interface. Ensure that the IP addresses and host names for both controller " "node and Block Storage service node are listed in the " "/etc/hosts file on each system." msgstr "" #: ./doc/install-guide/section_cinder-node.xml27(para) msgid "" "Follow the instructions in to synchronize " "from the controller node." msgstr "" #: ./doc/install-guide/section_cinder-node.xml33(para) msgid "Install the required LVM packages, if they are not already installed:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml38(para) msgid "" "Create the LVM physical and logical volumes. This guide assumes a second " "disk /dev/sdb that is used for this purpose:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml45(para) msgid "" "Add a filter entry to the devices section in the " "/etc/lvm/lvm.conf file to keep LVM from scanning " "devices used by virtual machines:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml55(para) msgid "" "You must add required physical volumes for LVM on the Block Storage host. " "Run the command to get a list or required volumes." msgstr "" #: ./doc/install-guide/section_cinder-node.xml59(para) msgid "" "Each item in the filter array starts with either an a for" " accept, or an r for reject. The physical volumes that " "are required on the Block Storage host have names that begin with " "a. The array must end with \"r/.*/\" " "to reject any device not listed." msgstr "" #: ./doc/install-guide/section_cinder-node.xml66(para) msgid "" "In this example, /dev/sda1 is the volume where the " "volumes for the operating system for the node reside, while " "/dev/sdb is the volume reserved for cinder-" "volumes." msgstr "" #: ./doc/install-guide/section_cinder-node.xml72(para) msgid "" "After you configure the operating system, install the appropriate packages " "for the Block Storage service:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml79(para) msgid "" "Respond to the debconf prompts " "about the database " "management, [keystone_authtoken] " "settings, and RabbitMQ " "credentials. Make sure to enter the same details as you did for your " "Block Storage service controller node." msgstr "" #: ./doc/install-guide/section_cinder-node.xml87(para) msgid "" "Another screen prompts you for the volume-" "group to use. The Debian package configuration script detects " "every active volume group and tries to use the first one it sees, provided " "that the lvm2 package was " "installed before Block Storage. This should be the case if you configured " "the volume group first, as this guide recommends." msgstr "" #: ./doc/install-guide/section_cinder-node.xml94(para) msgid "" "If you have only one active volume group on your Block Storage service node," " you do not need to manually enter its name when you install the cinder-volume package because it is detected" " automatically. If no volume-" "group is available when you install cinder-common, you must use to manually " "configure or re-configure cinder-" "common." msgstr "" #: ./doc/install-guide/section_cinder-node.xml106(para) msgid "" "Copy the /etc/cinder/cinder.conf configuration file " "from the controller, or perform the following steps to set the keystone " "credentials:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml125(replaceable) #: ./doc/install-guide/section_cinder-node.xml137(replaceable) #: ./doc/install-guide/section_cinder-controller.xml74(replaceable) #: ./doc/install-guide/section_cinder-controller.xml95(replaceable) #: ./doc/install-guide/section_cinder-controller.xml107(replaceable) msgid "CINDER_PASS" msgstr "CINDER_PASS" #: ./doc/install-guide/section_cinder-node.xml126(para) #: ./doc/install-guide/section_cinder-controller.xml96(para) msgid "" "Edit the /etc/cinder/cinder.conf configuration file and" " add this section for keystone credentials:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml140(para) #: ./doc/install-guide/section_cinder-controller.xml110(para) #: ./doc/install-guide/section_cinder-controller.xml134(para) msgid "Configure Block Storage to use the RabbitMQ message broker." msgstr "" #: ./doc/install-guide/section_cinder-node.xml142(para) msgid "" "In the [DEFAULT] configuration section of the " "/etc/cinder/cinder.conf file, set these configuration " "keys and replace RABBIT_PASS with the password " "you chose for RabbitMQ:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml156(para) #: ./doc/install-guide/section_cinder-controller.xml126(para) msgid "Configure Block Storage to use the Qpid message broker:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml164(para) msgid "" "Configure Block Storage to use the RabbitMQ message broker. Replace " "RABBIT_PASS with the password you chose for " "RabbitMQ:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml177(para) msgid "" "Configure Block Storage to use your MySQL database. Edit the " "/etc/cinder/cinder.conf file and add the following key " "to the [database] section. Replace " "CINDER_DBPASS with the password you chose for the" " Block Storage database:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml183(replaceable) #: ./doc/install-guide/section_cinder-node.xml186(replaceable) #: ./doc/install-guide/section_cinder-controller.xml44(replaceable) #: ./doc/install-guide/section_cinder-controller.xml47(replaceable) #: ./doc/install-guide/section_cinder-controller.xml59(replaceable) #: ./doc/install-guide/section_cinder-controller.xml61(replaceable) msgid "CINDER_DBPASS" msgstr "CINDER_DBPASS" #: ./doc/install-guide/section_cinder-node.xml188(para) #: ./doc/install-guide/section_cinder-controller.xml48(para) msgid "" "In some distributions, the /etc/cinder/cinder.conf file" " does not include the [database] section header. You must" " add this section header to the end of the file before you proceed." msgstr "" #: ./doc/install-guide/section_cinder-node.xml196(para) msgid "" "Configure Block Storage to use the Image Service. Block Storage needs access" " to images to create bootable volumes. Edit the " "/etc/cinder/cinder.conf file and update the " " option in the [DEFAULT] " "section:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml208(para) #: ./doc/install-guide/section_cinder-controller.xml168(para) msgid "Restart the Block Storage services with the new settings:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml214(para) msgid "" "Configure the iSCSI target service to discover Block Storage volumes. Add " "the following line to the beginning of the " "/etc/tgt/targets.conf file, if it is not already " "present:" msgstr "" #: ./doc/install-guide/section_cinder-node.xml221(para) #: ./doc/install-guide/section_cinder-controller.xml174(para) msgid "" "Start and configure the Block Storage services to start when the system " "boots:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml5(title) msgid "Configure a Block Storage service controller" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml7(para) msgid "" "This scenario configures OpenStack Block Storage services on the Controller node and assumes that a " "second node provides storage through the cinder-volume service." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml12(para) msgid "" "For instructions on how to configure the second node, see ." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml20(para) msgid "Install the appropriate packages for the Block Storage service:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml27(para) msgid "" "Respond to the prompts for database management, " "[keystone_authtoken] settings, RabbitMQ credentials and " "API endpoint registration." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml31(para) msgid "Configure Block Storage to use your database." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml32(para) msgid "" "Run the following command to set connection option in the" " [database] section, which is in the " "/etc/cinder/cinder.conf file, replace " "CINDER_DBPASS with the password for the Block " "Storage database that you will create in a later step:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml38(para) msgid "" "In the /etc/cinder/cinder.conf file, set the " "connection option in the [database] " "section and replace CINDER_DBPASS with the " "password for the Block Storage database that you will create in a later " "step:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml54(para) msgid "" "Use the password that you set to log in as root to create a " "cinder database:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml64(para) msgid "Create the database tables for the Block Storage service:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml69(para) msgid "Create a cinder user." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml70(para) msgid "" "The Block Storage service uses this user to authenticate with the Identity " "service." msgstr "" #: ./doc/install-guide/section_cinder-controller.xml72(para) msgid "" "Use the service tenant and give the user the " "admin role:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml74(replaceable) msgid "cinder@example.com" msgstr "cinder@example.com" #: ./doc/install-guide/section_cinder-controller.xml78(para) msgid "" "Edit the /etc/cinder/cinder.conf configuration file:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml112(para) msgid "" "In the [DEFAULT] section in the " "/etc/cinder/cinder.conf file, set these configuration " "keys and replace RABBIT_PASS with the password " "you chose for RabbitMQ:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml136(para) msgid "" "Replace RABBIT_PASS with the password you chose " "for RabbitMQ:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml148(para) msgid "" "Register the Block Storage service with the Identity service so that other " "OpenStack services can locate it:" msgstr "" #: ./doc/install-guide/section_cinder-controller.xml158(para) msgid "" "Register a service and endpoint for version 2 of the Block Storage service " "API:" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml8(title) msgid "" "OpenStack Installation Guide for Red Hat " "Enterprise Linux, CentOS, and Fedora for " "Ubuntu 12.04/14.04 (LTS) for Debian 7.0 " "(Wheezy) for openSUSE and SUSE Linux " "Enterprise Server" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml18(phrase) msgid "for Red Hat Enterprise Linux, CentOS, and Fedora" msgstr "Red Hat Enterprise Linux, CentOS, ਅਤੇ Fedora ਲਈ" #: ./doc/install-guide/bk_openstackinstallguide.xml20(phrase) msgid "for Ubuntu 12.04/14.04 (LTS)" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml21(phrase) msgid "for openSUSE and SUSE Linux Enterprise Server" msgstr "openSUSE ਅਤੇ Linux ਇੰਟਰਪ੍ਰਾਈਜ਼ ਸਰਵਰ ਲਈ " #: ./doc/install-guide/bk_openstackinstallguide.xml23(phrase) msgid "for Debian 7.0 (Wheezy)" msgstr "Debian 7.0 (Wheezy) ਲਈ" #: ./doc/install-guide/bk_openstackinstallguide.xml17(titleabbrev) msgid "" "OpenStack Installation " "Guide" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml32(orgname) msgid "OpenStack" msgstr "ਓਪਨ-ਸਟੈਕ" #: ./doc/install-guide/bk_openstackinstallguide.xml36(year) msgid "2012" msgstr "੨੦੧੨" #: ./doc/install-guide/bk_openstackinstallguide.xml37(year) msgid "2013" msgstr "੨੦੧੩" #: ./doc/install-guide/bk_openstackinstallguide.xml38(holder) msgid "OpenStack Foundation" msgstr "ਓਪਨ-ਸਟੈਕ ਫਾਊਂਡੇਸ਼ਨ" #: ./doc/install-guide/bk_openstackinstallguide.xml40(releaseinfo) msgid "icehouse" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml41(productname) msgid "OpenStack Installation Guide" msgstr "ਓਪਨਸਟੈਕ ਇੰਸਟਾਲੇਸ਼ਨ ਹਦਾਇਤ ਕਿਤਾਬਚਾ" #: ./doc/install-guide/bk_openstackinstallguide.xml45(remark) msgid "Copyright details are filled in by the template." msgstr "ਨਕਲ-ਹੱਕ ਵੇਰਵੇ ਟੈਂਪਲੇਟ ਦੁਆਰਾ ਭਰੇ ਜਾਂਦੇ ਹਨ।" #: ./doc/install-guide/bk_openstackinstallguide.xml50(para) msgid "" "The OpenStack® system consists of several key projects that you install " "separately but that work together depending on your cloud needs. These " "projects include Compute, Identity Service, Networking, Image Service, Block" " Storage, Object Storage, Telemetry, Orchestration, and Database. You can " "install any of these projects separately and configure them stand-alone or " "as connected entities. This guide walks through an " "installation by using packages available through Debian 7.0 (code name: " "Wheezy).This guide walks through an " "installation by using packages available through Ubuntu 12.04 (LTS) or 14.04" " (LTS).This guide shows you how " "to install OpenStack by using packages available through Fedora 19 as well " "as on Red Hat Enterprise Linux and its derivatives through the EPEL " "repository.This guide shows you how to " "install OpenStack by using packages on openSUSE through the Open Build " "Service Cloud repository. Explanations of configuration options and" " sample configuration files are included." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml78(date) msgid "2014-04-16" msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml82(para) msgid "" "Update for Icehouse, rework Networking setup to use ML2 as plugin, add new " "chapter for Database Service setup, improved basic configuration." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml91(date) msgid "2013-10-25" msgstr "੨੦੧੩-੧੦-੨੫" #: ./doc/install-guide/bk_openstackinstallguide.xml95(para) msgid "Added initial Debian support." msgstr "ਜੁੜਿਆ ਹੋਇਆ ਸ਼ੁਰੂਆਤੀ Debian ਸਮਰਥਨ।" #: ./doc/install-guide/bk_openstackinstallguide.xml101(date) msgid "2013-10-17" msgstr "੨੦੧੩-੧੦-੧੭" #: ./doc/install-guide/bk_openstackinstallguide.xml105(para) msgid "Havana release." msgstr "Havana ਰਿਲੀਜ਼" #: ./doc/install-guide/bk_openstackinstallguide.xml111(date) msgid "2013-10-16" msgstr "੨੦੧੩-੧੦-੧੬" #: ./doc/install-guide/bk_openstackinstallguide.xml115(para) msgid "Add support for SUSE Linux Enterprise." msgstr "SUSE Linux Enterprise ਲਈ ਸਮਰਥਨ ਜੋੜੋ।" #: ./doc/install-guide/bk_openstackinstallguide.xml122(date) msgid "2013-10-08" msgstr "੨੦੧੩-੧੦-੦੮" #: ./doc/install-guide/bk_openstackinstallguide.xml126(para) msgid "Complete reorganization for Havana." msgstr "Havana ਲਈ ਸੰਪੂਰਨ ਮੁੜ-ਸੰਗਠਨ।" #: ./doc/install-guide/bk_openstackinstallguide.xml133(date) msgid "2013-09-09" msgstr "੨੦੧੩-੦੯-੦੯" #: ./doc/install-guide/bk_openstackinstallguide.xml137(para) msgid "Build also for openSUSE." msgstr "openSUSE ਲਈ ਵੀ ਉਸਾਰੀ।" #: ./doc/install-guide/bk_openstackinstallguide.xml143(date) msgid "2013-08-01" msgstr "੨੦੧੩-੦੮-੦੧" #: ./doc/install-guide/bk_openstackinstallguide.xml147(para) msgid "" "Fixes to Object Storage verification steps. Fix bug 1207347." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml156(date) msgid "2013-07-25" msgstr "੨੦੧੩-੦੭-੨੫" #: ./doc/install-guide/bk_openstackinstallguide.xml160(para) msgid "" "Adds creation of cinder user and addition to the service tenant. Fix bug " "1205057." msgstr "" #: ./doc/install-guide/bk_openstackinstallguide.xml170(date) msgid "2013-05-08" msgstr "੨੦੧੩-੦੫-੦੮" #: ./doc/install-guide/bk_openstackinstallguide.xml174(para) msgid "Updated the book title for consistency." msgstr "ਇਕਸਾਰਤਾ ਲਈ ਕਿਤਾਬ ਦਾ ਸਿਰਲੇਖ ਅੱਪਡੇਟ ਕੀਤਾ।" #: ./doc/install-guide/bk_openstackinstallguide.xml181(date) msgid "2013-05-02" msgstr "੨੦੧੩-੦੫-੦੨" #: ./doc/install-guide/bk_openstackinstallguide.xml185(para) msgid "Updated cover and fixed small errors in appendix." msgstr "" #: ./doc/install-guide/ch_debconf.xml6(title) msgid "Configure OpenStack with debconf" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml11(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml11(para) msgid "" "Before you configure OpenStack Networking, you must enable certain kernel " "networking functions." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml14(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml14(para) msgid "Edit /etc/sysctl.conf to contain the following:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml21(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml20(para) msgid "Implement the changes:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml35(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml32(para) msgid "" "Ubuntu installations using Linux kernel version 3.11 or newer do not require" " the openvswitch-datapath-dkms package." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml45(title) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml42(title) msgid "To configure the Networking common components" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml46(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml43(para) msgid "" "The Networking common component configuration includes the authentication " "mechanism, message broker, and plug-in." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml190(title) msgid "To configure the Layer-3 (L3) agent" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml191(para) msgid "" "The Layer-3 (L3) agent provides routing services for " "instance virtual networks." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml200(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml215(para) msgid "" "We recommend adding verbose = True to the " "[DEFAULT] section in " "/etc/neutron/l3_agent.ini to assist with " "troubleshooting." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml207(para) msgid "" "Edit the /etc/neutron/l3_agent.ini file and add the " "following keys to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml223(title) msgid "To configure the DHCP agent" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml224(para) msgid "" "The DHCP agent provides DHCP " "services for instance virtual networks." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml236(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml252(para) msgid "" "We recommend adding verbose = True to the " "[DEFAULT] section in " "/etc/neutron/dhcp_agent.ini to assist with " "troubleshooting." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml243(para) msgid "" "Edit the /etc/neutron/dhcp_agent.ini file and add the " "following keys to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml260(title) msgid "To configure the metadata agent" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml261(para) msgid "" "The metadata agent provides configuration information" " such as credentials for remote access to instances." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml265(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml295(para) msgid "" "Replace NEUTRON_PASS with the password you chose " "for the neutron user in the Identity service. Replace " "METADATA_SECRET with a suitable secret for the " "metadata proxy." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml283(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml308(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml331(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml343(replaceable) msgid "METADATA_SECRET" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml285(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml310(para) msgid "" "We recommend adding verbose = True to the " "[DEFAULT] section in " "/etc/neutron/metadata_agent.ini to assist with " "troubleshooting." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml292(para) msgid "" "Edit the /etc/neutron/metadata_agent.ini file and add " "the following keys to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml318(para) msgid "" "Perform the next two steps on the controller node." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml323(para) msgid "" "On the controller node, configure Compute to use the " "metadata service:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml325(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml337(para) msgid "" "Replace METADATA_SECRET with the secret you chose" " for the metadata proxy." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml334(para) msgid "" "On the controller node, edit the " "/etc/nova/nova.conf file and add the following keys to " "the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml346(para) msgid "" "On the controller node, restart the Compute " "API service:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml354(para) msgid "" "The ML2 plug-in uses the Open vSwitch (OVS) mechanism (agent) to build " "virtual networking framework for instances." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml358(para) msgid "" "Replace INSTANCE_TUNNELS_INTERFACE_IP_ADDRESS " "with the IP address of the instance tunnels network interface on your " "network node. This guide uses 10.0.1.21 for the IP " "address of the instance tunnels network interface on the network node." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml374(replaceable) #: ./doc/install-guide/section_neutron-ml2-network-node.xml408(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml208(replaceable) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml242(replaceable) msgid "INSTANCE_TUNNELS_INTERFACE_IP_ADDRESS" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml385(para) msgid "" "Edit the /etc/neutron/plugins/ml2/ml2_conf.ini file." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml395(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml229(para) msgid "" "Add the following keys to the [ml2_type_gre] section:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml400(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml234(para) msgid "Add the [ovs] section and the following keys to it:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml402(para) msgid "" "Replace INSTANCE_TUNNELS_INTERFACE_IP_ADDRESS " "with the IP address of the instance tunnels network interface on your " "network node." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml420(title) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml254(title) msgid "To configure the Open vSwitch (OVS) service" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml421(para) msgid "" "The OVS service provides the underlying virtual networking framework for " "instances. The integration bridge br-int handles internal" " instance network traffic within OVS. The external bridge br-" "ext handles external instance network traffic within OVS. The " "external bridge requires a port on the physical external network interface " "to provide instances with external network access. In essence, this port " "bridges the virtual and physical external networks in your environment." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml430(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml436(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml259(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml265(para) msgid "Start the OVS service and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml442(para) #: ./doc/install-guide/section_neutron-ml2-network-node.xml446(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml271(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml275(para) msgid "Restart the OVS service:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml450(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml279(para) msgid "Add the integration bridge:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml454(para) msgid "Add the external bridge:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml458(para) msgid "" "Add a port to the external bridge that connects to the physical external " "network interface:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml465(para) msgid "" "Depending on your network interface driver, you may need to disable " "Generic Receive Offload (GRO) to achieve suitable " "throughput between your instances and the external network." msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml469(para) msgid "" "To temporarily disable GRO on the external network interface while testing " "your environment:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml476(title) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml349(title) msgid "To finalize the installation" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml478(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml351(para) msgid "" "The Networking service initialization scripts expect a symbolic link " "/etc/neutron/plugin.ini pointing to the configuration " "file associated with your chosen plug-in. Using the ML2 plug-in, for " "example, the symbolic link must point to " "/etc/neutron/plugins/ml2/ml2_conf.ini. If this symbolic" " link does not exist, create it using the following commands:" msgstr "" #. https://bugzilla.redhat.com/show_bug.cgi?id=1087647 #: ./doc/install-guide/section_neutron-ml2-network-node.xml487(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml360(para) msgid "" "Due to a packaging bug, the Open vSwitch agent initialization script " "explicitly looks for the Open vSwitch plug-in configuration file rather than" " a symbolic link /etc/neutron/plugin.ini pointing to " "the ML2 plug-in configuration file. Run the following commands to resolve " "this issue:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml497(para) #: ./doc/install-guide/section_neutron-ml2-compute-node.xml370(para) msgid "" "The Networking service initialization scripts expect the variable " "NEUTRON_PLUGIN_CONF in the " "/etc/sysconfig/neutron file to reference the " "configuration file associated with your chosen plug-in. Using ML2, for " "example, edit the /etc/sysconfig/neutron file and add " "the following:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml507(para) msgid "" "Start the Networking services and configure them to start when the system " "boots:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-network-node.xml527(para) msgid "Restart the Networking services:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-compute-node.xml188(para) msgid "" "The ML2 plug-in uses the Open vSwitch (OVS) mechanism (agent) to build the " "virtual networking framework for instances." msgstr "" #: ./doc/install-guide/section_neutron-ml2-compute-node.xml192(para) msgid "" "Replace INSTANCE_TUNNELS_INTERFACE_IP_ADDRESS " "with the IP address of the instance tunnels network interface on your " "compute node. This guide uses 10.0.1.31 for the IP " "address of the instance tunnels network interface on the first compute node." msgstr "" #: ./doc/install-guide/section_neutron-ml2-compute-node.xml236(para) msgid "" "Replace INSTANCE_TUNNELS_INTERFACE_IP_ADDRESS " "with the IP address of the instance tunnels network interface on your " "compute node." msgstr "" #: ./doc/install-guide/section_neutron-ml2-compute-node.xml255(para) msgid "" "The OVS service provides the underlying virtual networking framework for " "instances. The integration bridge br-int handles internal" " instance network traffic within OVS." msgstr "" #: ./doc/install-guide/section_neutron-ml2-compute-node.xml380(para) #: ./doc/install-guide/section_ceilometer-nova.xml53(para) #: ./doc/install-guide/section_nova-compute.xml208(para) msgid "Restart the Compute service:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-compute-node.xml385(para) msgid "" "Start the Open vSwitch (OVS) agent and configure it to start when the system" " boots:" msgstr "" #: ./doc/install-guide/section_neutron-ml2-compute-node.xml393(para) msgid "Restart the Open vSwitch (OVS) agent:" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/ch_overview.xml35(None) msgid "" "@@image: '../common/figures/openstack_havana_conceptual_arch.png'; " "md5=96e1d5492d4c865fc9145710bb294a91" msgstr "" #: ./doc/install-guide/ch_overview.xml6(title) msgid "Architecture" msgstr "ਢਾਂਚਾ" #: ./doc/install-guide/ch_overview.xml8(title) msgid "Overview" msgstr "" #: ./doc/install-guide/ch_overview.xml9(para) msgid "" "The OpenStack project is an open source cloud " "computing platform that supports all types of cloud environments. The " "project aims for simple implementation, massive scalability, and a rich set " "of features. Cloud computing experts from around the world contribute to the" " project." msgstr "" #: ./doc/install-guide/ch_overview.xml14(para) msgid "" "OpenStack provides an Infrastructure-as-a-Service " "(IaaS) solution through a variety of complemental " "services. Each service offers an application programming interface " "(API) that facilitates this integration. The " "following table provides a list of OpenStack services:" msgstr "" #: ./doc/install-guide/ch_overview.xml21(para) msgid "" "This guide describes how to deploy these services in a functional test " "environment and, by example, teaches you how to build a production " "environment." msgstr "" #: ./doc/install-guide/ch_overview.xml26(title) #: ./doc/install-guide/ch_overview.xml31(title) msgid "Conceptual architecture" msgstr "" #: ./doc/install-guide/ch_overview.xml27(para) msgid "" "Launching a virtual machine or instance involves many interactions among " "several services. The following diagram provides the conceptual architecture" " of a typical OpenStack environment." msgstr "" #: ./doc/install-guide/ch_overview.xml41(title) msgid "Example architectures" msgstr "" #: ./doc/install-guide/ch_overview.xml42(para) msgid "" "OpenStack is highly configurable to meet different needs with various " "compute, networking, and storage options. This guide enables you to choose " "your own OpenStack adventure using a combination of basic and optional " "services. This guide uses the following example architectures:" msgstr "" #: ./doc/install-guide/ch_overview.xml49(para) msgid "" "Three-node architecture with OpenStack Networking (neutron). See ." msgstr "" #: ./doc/install-guide/ch_overview.xml52(para) msgid "" "The basic controller node runs the Identity service, Image Service, " "management portions of Compute and Networking, Networking plug-in, and the " "dashboard. It also includes supporting services such as a database, " "message broker, and Network Time Protocol " "(NTP)." msgstr "" #: ./doc/install-guide/ch_overview.xml59(para) #: ./doc/install-guide/ch_overview.xml114(para) msgid "" "Optionally, the controller node also runs portions of Block Storage, Object " "Storage, Database Service, Orchestration, and Telemetry. These components " "provide additional features for your environment." msgstr "" #: ./doc/install-guide/ch_overview.xml65(para) msgid "" "The network node runs the Networking plug-in, layer 2 agent, and several " "layer 3 agents that provision and operate tenant networks. Layer 2 services " "include provisioning of virtual networks and tunnels. Layer 3 services " "include routing, NAT , and DHCP. This node also " "handles external (internet) connectivity for tenant virtual machines or " "instances." msgstr "" #: ./doc/install-guide/ch_overview.xml75(para) msgid "" "The compute node runs the hypervisor portion of Compute, which operates " "tenant virtual machines or instances. By default Compute uses KVM as the " "hypervisor. The compute node also runs the Networking plug-in and layer 2 " "agent which operate tenant networks and implement security groups. You can " "run more than one compute node." msgstr "" #: ./doc/install-guide/ch_overview.xml81(para) #: ./doc/install-guide/ch_overview.xml130(para) msgid "" "Optionally, the compute node also runs the Telemetry agent. This component " "provides additional features for your environment." msgstr "" #: ./doc/install-guide/ch_overview.xml87(para) msgid "" "When you implement this architecture, skip in . To use optional " "services, you might need to install additional nodes, as described in " "subsequent chapters." msgstr "" #: ./doc/install-guide/ch_overview.xml104(para) msgid "" "Two-node architecture with legacy networking (nova-network). See ." msgstr "" #: ./doc/install-guide/ch_overview.xml108(para) msgid "" "The basic controller " "node runs the Identity service, Image Service, management " "portion of Compute, and the dashboard necessary to launch a simple instance." " It also includes supporting services such as a database, message broker, " "and NTP." msgstr "" #: ./doc/install-guide/ch_overview.xml120(para) msgid "" "The basic compute node runs the " "hypervisor portion of Compute, which operates " "tenantvirtual machines or instances. By default, Compute uses " "KVM as the " "hypervisor. Compute also provisions and operates " "tenant networks and implements security groups. You can run more than one compute node." msgstr "" #: ./doc/install-guide/ch_overview.xml136(para) msgid "" "When you implement this architecture, skip in . To use optional " "services, you might need to install additional nodes, as described in " "subsequent chapters." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml13(title) msgid "Install the dashboard" msgstr "ਡੈਸ਼ਬੋਰਡ ਇੰਸਟਾਲ ਕਰੋ" #: ./doc/install-guide/section_dashboard-install.xml14(para) msgid "" "Before you can install and configure the dashboard, meet the requirements in" " ." msgstr "ਡੈਸ਼ਬੋਰਡ ਨੂੰ ਇੰਸਟਾਲ ਅਤੇ ਸੰਰਚਿਤ ਕਰਨ ਤੋਂ ਪਹਿਲਾਂ, ਵਿਚਲੀਆਂ ਜ਼ਰੂਰਤਾਂ ਪੂਰੀਆਂ ਕਰੋ।" #: ./doc/install-guide/section_dashboard-install.xml18(para) msgid "" "When you install only Object Storage and the Identity Service, even if you " "install the dashboard, it does not pull up projects and is unusable." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml22(para) msgid "" "For more information about how to deploy the dashboard, see deployment" " topics in the developer documentation." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml28(para) msgid "" "Install the dashboard on the node that can contact the Identity Service as " "root:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml34(title) msgid "Note for Ubuntu users" msgstr "ਉਬੰਤੂ ਵਰਤੋਂਕਾਰਾਂ ਲਈ ਟਿੱਪਣੀ" #: ./doc/install-guide/section_dashboard-install.xml36(para) msgid "" "Remove the openstack-dashboard-ubuntu-theme package. This" " theme prevents translations, several menus as well as the network map from " "rendering correctly: " msgstr "" #: ./doc/install-guide/section_dashboard-install.xml45(title) msgid "Note for Debian users" msgstr "Debian ਵਰਤੋਂਕਾਰਾਂ ਲਈ ਟਿੱਪਣੀ" #: ./doc/install-guide/section_dashboard-install.xml46(para) msgid "To install the Apache package:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml48(para) msgid "" "This command installs and configures Apache correctly, provided that the " "user asks for it during the debconf prompts. The default " "SSL certificate is self-signed, and it is probably wise to have it signed by" " a root Certificate Authority (CA)." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml57(para) msgid "" "Modify the value of CACHES['default']['LOCATION'] in " "/etc/openstack-" "dashboard/local_settings.py/etc/openstack-" "dashboard/local_settings/srv/www" "/openstack-dashboard/openstack_dashboard/local/local_settings.py " "to match the ones set in /etc/memcached.conf/etc/sysconfig/memcached." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml69(para) msgid "" "Open /etc/openstack-" "dashboard/local_settings.py/etc/openstack-dashboard/local_settings" " and look for this line:" msgstr "/etc/openstack-dashboard/local_settings.py/etc/openstack-dashboard/local_settings ਨੂੰ ਖੋਲ੍ਹੋ ਅਤੇ ਇਸ ਸਤਰ੍ਹ ਲਈ ਦੇਖੋ:" #: ./doc/install-guide/section_dashboard-install.xml82(title) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml29(td) msgid "Notes" msgstr "ਨੋਟਸ" #: ./doc/install-guide/section_dashboard-install.xml85(para) msgid "" "The address and port must match the ones set in /etc/memcached.conf/etc/sysconfig/memcached." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml90(para) msgid "" "If you change the memcached settings, you must restart the Apache web server" " for the changes to take effect." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml95(para) msgid "" "You can use options other than memcached option for session storage. Set the" " session back-end through the SESSION_ENGINE option." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml102(para) msgid "" "To change the timezone, use the dashboard or edit the /etc/openstack-" "dashboard/local_settings/etc" "/openstack-dashboard/local_settings.py/srv/www/openstack-" "dashboard/openstack_dashboard/local/local_settings.py file." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml111(para) msgid "Change the following parameter: TIME_ZONE = \"UTC\"" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml118(para) msgid "" "Update the ALLOWED_HOSTS in " "local_settings.py to include the addresses you wish to " "access the dashboard from." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml122(para) msgid "" "Edit /etc/openstack-" "dashboard/local_settings/etc" "/openstack-dashboard/local_settings.py/srv/www/openstack-" "dashboard/openstack_dashboard/local/local_settings.py:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml133(para) msgid "" "This guide assumes that you are running the Dashboard on the controller " "node. You can easily run the dashboard on a separate server, by changing the" " appropriate settings in local_settings.py." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml138(para) msgid "" "Edit /etc/openstack-" "dashboard/local_settings/etc" "/openstack-dashboard/local_settings.py/srv/www/openstack-" "dashboard/openstack_dashboard/local/local_settings.py and change " "OPENSTACK_HOST to the hostname of your Identity Service:" msgstr "" #: ./doc/install-guide/section_dashboard-install.xml150(para) msgid "Setup Apache configuration: " msgstr "Apache ਸੰਰਚਨਾ ਸੈੱਟਅਪ ਕਰੋ: " #: ./doc/install-guide/section_dashboard-install.xml157(para) msgid "" "By default, the openstack-dashboard package enables" " a database as session store. Before you continue, either change the session" " store set up as described in or " "finish the setup of the database session store as explained in ." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml167(para) msgid "" "Ensure that the SELinux policy of the system is configured to allow network " "connections to the HTTP server." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml174(para) msgid "Start the Apache web server and memcached:" msgstr "Apache ਵੈੱਬ ਸਰਵਰ ਅਤੇ memcached ਦੀਆ ਸੇਵਾਵਾਂ ਸ਼ੁਰੂ ਕਰੋ:" #: ./doc/install-guide/section_dashboard-install.xml187(para) msgid "" "You can now access the dashboard at http://controller/horizonhttps://controller/http://controller/dashboardhttp://controller." msgstr "" #: ./doc/install-guide/section_dashboard-install.xml194(para) msgid "" "Login with credentials for any user that you created with the OpenStack " "Identity Service." msgstr "" #: ./doc/install-guide/section_basics-queue.xml6(title) msgid "Messaging server" msgstr "ਸੁਨੇਹਾ ਸਰਵਰ" #: ./doc/install-guide/section_basics-queue.xml7(para) msgid "" "OpenStack uses a message broker to coordinate " "operations and status information among services. The message broker service" " typically runs on the controller node. OpenStack supports several message " "brokers including RabbitMQ, " "Qpid, and ZeroMQ. " "However, most distributions that package OpenStack support a particular " "message broker. This guide covers the message broker supported by each " "distribution. If you prefer to implement a different message broker, consult" " the documentation associated with it." msgstr "" #: ./doc/install-guide/section_basics-queue.xml18(link) msgid "RabbitMQ" msgstr "" #: ./doc/install-guide/section_basics-queue.xml21(link) msgid "Qpid" msgstr "" #: ./doc/install-guide/section_basics-queue.xml24(link) msgid "ZeroMQ" msgstr "" #: ./doc/install-guide/section_basics-queue.xml28(title) msgid "To install the message broker service" msgstr "" #: ./doc/install-guide/section_basics-queue.xml30(para) msgid "Ubuntu and Debian use RabbitMQ." msgstr "" #: ./doc/install-guide/section_basics-queue.xml34(para) msgid "" "Red Hat Enterprise Linux (RHEL), CentOS, Scientific Linux, and Fedora use " "Qpid." msgstr "" #: ./doc/install-guide/section_basics-queue.xml40(para) msgid "" "SUSE Linux Enterprise Server (SLES) and openSUSE use " "RabbitMQ." msgstr "" #: ./doc/install-guide/section_basics-queue.xml46(title) msgid "To configure the message broker service" msgstr "" #: ./doc/install-guide/section_basics-queue.xml48(para) msgid "" "To simplify installation of your test environment, we recommend that you " "disable authentication." msgstr "" #: ./doc/install-guide/section_basics-queue.xml50(para) msgid "" "Edit the /etc/qpidd.conf file and change the following " "key:" msgstr "" #: ./doc/install-guide/section_basics-queue.xml54(para) msgid "" "For production environments, you should enable authentication. For more " "information on securing the message broker, see the documentation." msgstr "" #: ./doc/install-guide/section_basics-queue.xml59(para) msgid "" "If you decide to enable authentication for your test environment, you must " "configure the qpid_username and " "qpid_password keys in the configuration file of each " "OpenStack service that uses the message broker." msgstr "" #: ./doc/install-guide/section_basics-queue.xml66(para) msgid "Start the message broker service:" msgstr "" #: ./doc/install-guide/section_basics-queue.xml70(para) msgid "" "The message broker creates a default account that uses " "guest for the username and password. To simplify " "installation of your test environment, we recommend that you use this " "account, but change the password for it." msgstr "" #: ./doc/install-guide/section_basics-queue.xml74(para) #: ./doc/install-guide/section_nova-compute.xml159(para) #: ./doc/install-guide/section_nova-compute.xml178(para) msgid "Run the following command:" msgstr "" #: ./doc/install-guide/section_basics-queue.xml75(para) msgid "" "Replace RABBIT_PASS with a suitable password." msgstr "" #: ./doc/install-guide/section_basics-queue.xml78(para) msgid "" "You must configure the rabbit_password key in the " "configuration file for each OpenStack service that uses the message broker." msgstr "" #: ./doc/install-guide/section_basics-queue.xml82(para) msgid "" "For production environments, you should create a unique account with " "suitable password. For more information on securing the message broker, see " "the documentation." msgstr "" #: ./doc/install-guide/section_basics-queue.xml87(para) msgid "" "If you decide to create a unique account with suitable password for your " "test environment, you must configure the rabbit_userid " "and rabbit_password keys in the configuration file of " "each OpenStack service that uses the message broker." msgstr "" #: ./doc/install-guide/section_basics-queue.xml98(para) msgid "" "Start the message broker service and configure it to start when the system " "boots:" msgstr "" #: ./doc/install-guide/section_basics-queue.xml104(para) msgid "Configure the message broker service to start when the system boots:" msgstr "" #: ./doc/install-guide/section_basics-queue.xml109(para) msgid "Congratulations, now you are ready to install OpenStack services!" msgstr "ਵਧਾਈਆੰ, ਹੁਣ ਤੁਸੀਂ OpenStack ਸੇਵਾਵਾੰ ਇੰਸਟਾਲ ਕਰਨ ਲਈ ਤਿਆਰ ਹੋ!" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_neutron-initial-networks.xml25(None) msgid "" "@@image: 'figures/installguide_neutron-initial-networks.png'; " "md5=df1d74b6f91feefe5cfaf7824aac86e1" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml8(title) msgid "Create initial networks" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml9(para) msgid "" "Before launching your first instance, you must create the necessary virtual " "network infrastructure to which the instance will connect, including the " "external network " "and tenant network. " "See . After " "creating this infrastructure, we recommend that you verify connectivity and resolve " "any issues before proceeding further." msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml21(title) msgid "Initial networks" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml30(title) msgid "External network" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml31(para) msgid "" "The external network typically provides internet access for your instances. " "By default, this network only allows internet access " "from instances using Network Address " "Translation (NAT). You can enable internet access " "to individual instances using a floating IP " "address and suitable security group " "rules. The admin tenant owns this network because it " "provides external network access for multiple tenants. You must also enable " "sharing to allow access by those tenants." msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml45(title) msgid "To create the external network" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml71(para) msgid "" "Like a physical network, a virtual network requires a " "subnet assigned to it. The external network shares " "the same subnet and gateway associated with the " "physical network connected to the external interface on the network node. " "You should specify an exclusive slice of this subnet for " "router and floating IP addresses to prevent " "interference with other devices on the external network." msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml78(para) msgid "" "Replace FLOATING_IP_START and " "FLOATING_IP_END with the first and last IP " "addresses of the range that you want to allocate for floating IP addresses. " "Replace EXTERNAL_NETWORK_CIDR with the subnet " "associated with the physical network. Replace " "EXTERNAL_NETWORK_GATEWAY with the gateway " "associated with the physical network, typically the \".1\" IP address. You " "should disable DHCP on this subnet because instances " "do not connect directly to the external network and floating IP addresses " "require manual assignment." msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml89(title) msgid "To create a subnet on the external network" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml91(para) #: ./doc/install-guide/section_neutron-initial-networks.xml166(para) msgid "Create the subnet:" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml93(replaceable) msgid "FLOATING_IP_START" msgstr "FLOATING_IP_START" #: ./doc/install-guide/section_neutron-initial-networks.xml93(replaceable) msgid "FLOATING_IP_END" msgstr "FLOATING_IP_END" #: ./doc/install-guide/section_neutron-initial-networks.xml94(replaceable) msgid "EXTERNAL_NETWORK_GATEWAY" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml94(replaceable) msgid "EXTERNAL_NETWORK_CIDR" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml95(para) msgid "" "For example, using 203.0.113.0/24 with floating IP " "address range 203.0.113.101 to " "203.0.113.200:" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml123(title) msgid "Tenant network" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml124(para) msgid "" "The tenant network provides internal network access for instances. The " "architecture isolates this type of network from other tenants. The " "demo tenant owns this network because it only provides " "network access for instances within it." msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml132(title) msgid "To create the tenant network" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml154(para) msgid "" "Like the external network, your tenant network also requires a subnet " "attached to it. You can specify any valid subnet because the architecture " "isolates tenant networks. Replace " "TENANT_NETWORK_CIDR with the subnet you want to " "associate with the tenant network. Replace " "TENANT_NETWORK_GATEWAY with the gateway you want " "to associate with this network, typically the \".1\" IP address. By default," " this subnet will use DHCP so your instances can obtain IP addresses." msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml164(title) msgid "To create a subnet on the tenant network" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml168(replaceable) msgid "TENANT_NETWORK_GATEWAY" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml168(replaceable) msgid "TENANT_NETWORK_CIDR" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml169(para) msgid "Example using 192.168.1.0/24:" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml192(para) msgid "" "A virtual router passes network traffic between two or more virtual " "networks. Each router requires one or more interfaces and/or gateways that provide " "access to specific networks. In this case, you will create a router and " "attach your tenant and external networks to it." msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml198(title) msgid "" "To create a router on the tenant network and attach the external and tenant " "networks to it" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml201(para) msgid "Create the router:" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml216(para) msgid "Attach the router to the demo tenant subnet:" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml222(para) msgid "" "Attach the router to the external network by setting it as the gateway:" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml231(para) msgid "" "We recommend that you verify network connectivity and resolve any issues " "before proceeding further. Following the external network subnet example " "using 203.0.113.0/24, the tenant router gateway should " "occupy the lowest IP address in the floating IP address range, " "203.0.113.101. If you configured your external physical " "network and virtual networks correctly, you you should be able to " " this IP address from any host on your external physical " "network." msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml240(para) msgid "" "If you are building your OpenStack nodes as virtual machines, you must " "configure the hypervisor to permit promiscuous mode on the external network." msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml245(title) msgid "To verify network connectivity" msgstr "" #: ./doc/install-guide/section_neutron-initial-networks.xml247(para) msgid "Ping the tenant router gateway:" msgstr "" #: ./doc/install-guide/section_heat-install.xml5(title) msgid "Install the Orchestration service" msgstr "" #: ./doc/install-guide/section_heat-install.xml8(para) #: ./doc/install-guide/section_heat-install.xml24(para) msgid "Install the Orchestration module on the controller node:" msgstr "" #: ./doc/install-guide/section_heat-install.xml13(para) msgid "" "Respond to prompts for database " "management, [keystone_authtoken] " "settings, RabbitMQ " "credentials and API " "endpoint registration." msgstr "" #: ./doc/install-guide/section_heat-install.xml33(para) msgid "" "In the configuration file, specify the location of the database where the " "Orchestration service stores data. These examples use a MySQL database with " "a heat user on the controller node. Replace " "HEAT_DBPASS with the password for the database " "user:" msgstr "" #: ./doc/install-guide/section_heat-install.xml40(replaceable) #: ./doc/install-guide/section_heat-install.xml46(replaceable) #: ./doc/install-guide/section_heat-install.xml61(replaceable) #: ./doc/install-guide/section_heat-install.xml63(replaceable) msgid "HEAT_DBPASS" msgstr "HEAT_DBPASS" #: ./doc/install-guide/section_heat-install.xml41(para) msgid "" "Edit /etc/heat/heat.conf and modify the " "[database] section:" msgstr "" #: ./doc/install-guide/section_heat-install.xml49(para) msgid "" "By default, the Ubuntu packages create an SQLite database. Delete the " "heat.sqlite file that was created in the " "/var/lib/heat/ directory so that it does not get used " "by mistake:" msgstr "" #: ./doc/install-guide/section_heat-install.xml56(para) msgid "" "Use the password that you set previously to log in as " "root and create a heat database user:" msgstr "" #: ./doc/install-guide/section_heat-install.xml66(para) msgid "Create the heat service tables:" msgstr "" #: ./doc/install-guide/section_heat-install.xml69(para) msgid "Ignore DeprecationWarning errors." msgstr "" #: ./doc/install-guide/section_heat-install.xml74(para) msgid "" "The Ubuntu packages do not correctly set up logging. Edit the " "/etc/heat/heat.conf file and change the " "[DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_heat-install.xml88(para) msgid "" "Configure the Orchestration Service to use the RabbitMQ message broker." msgstr "" #: ./doc/install-guide/section_heat-install.xml90(para) msgid "" "Edit /etc/heat/heat.conf and modify the " "[DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_heat-install.xml99(para) msgid "" "Create a heat user that the Orchestration service can use" " to authenticate with the Identity Service. Use the " "service tenant and give the user the " "admin role:" msgstr "" #: ./doc/install-guide/section_heat-install.xml103(replaceable) #: ./doc/install-guide/section_heat-install.xml119(replaceable) msgid "HEAT_PASS" msgstr "HEAT_PASS" #: ./doc/install-guide/section_heat-install.xml104(replaceable) msgid "heat@example.com" msgstr "heat@example.com" #: ./doc/install-guide/section_heat-install.xml108(para) msgid "" "Edit the /etc/heat/heat.conf file to change the " "[keystone_authtoken] and " "[ec2authtoken] sections to add credentials to the " "Orchestration Service:" msgstr "" #: ./doc/install-guide/section_heat-install.xml125(para) msgid "" "Register the Heat and CloudFormation APIs with the Identity Service so that " "other OpenStack services can locate these APIs. Register the services and " "specify the endpoints:" msgstr "" #: ./doc/install-guide/section_heat-install.xml145(para) msgid "Create the heat_stack_user role." msgstr "" #: ./doc/install-guide/section_heat-install.xml146(para) msgid "" "This role is used as the default role for users created by the Orchestration" " module." msgstr "" #: ./doc/install-guide/section_heat-install.xml148(para) msgid "" "Run the following command to create the heat_stack_user " "role:" msgstr "" #: ./doc/install-guide/section_heat-install.xml153(para) msgid "Configure the metadata and waitcondition servers' URLs." msgstr "" #: ./doc/install-guide/section_heat-install.xml154(para) msgid "" "Edit the /etc/heat/heat.conf file and modify the " "following options in the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_heat-install.xml160(replaceable) #: ./doc/install-guide/section_heat-install.xml163(replaceable) #: ./doc/install-guide/section_heat-install.xml168(replaceable) #: ./doc/install-guide/section_heat-install.xml170(replaceable) msgid "10.0.0.11" msgstr "" #: ./doc/install-guide/section_heat-install.xml164(para) msgid "" "Run the following commands to modify the [DEFAULT] " "section of the /etc/heat/heat.conf file:" msgstr "" #: ./doc/install-guide/section_heat-install.xml172(para) msgid "" "The example uses the IP address of the controller (10.0.0.11) instead of the" " controller host name since our example architecture does" " not include a DNS setup. Make sure that the instances can resolve the " "controller host name if you choose to use it in the URLs." msgstr "" #: ./doc/install-guide/section_heat-install.xml186(para) msgid "" "Start the heat-api, heat-api-cfn and heat-engine services and configure them to start when the " "system boots:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml7(title) msgid "Install the Compute agent for Telemetry" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml9(para) msgid "" "Telemetry provides an API service that provides a collector and a range of " "disparate agents. This procedure details how to install the agent that runs " "on the compute node." msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml14(para) msgid "Install the Telemetry service on the compute node:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml20(para) msgid "" "Set the following options in the /etc/nova/nova.conf " "file:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml30(para) msgid "" "The option is a multi valued option, " "which openstack-config cannot set properly. See " "." msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml36(para) msgid "" "Edit the /etc/nova/nova.conf file and add the following" " lines to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml58(para) msgid "" "You must set the secret key that you defined previously. The Telemetry " "service nodes share this key as a shared secret:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml63(para) msgid "" "Edit the /etc/ceilometer/ceilometer.conf file and " "change these lines in the [publisher] section. Replace " "CEILOMETER_TOKEN with the ceilometer token that " "you created previously:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml84(para) msgid "Configure the QPid access:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml89(para) msgid "Add the Identity service credentials:" msgstr "" #: ./doc/install-guide/section_ceilometer-nova.xml141(para) msgid "Start the service and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_neutron-deploy-use-cases.xml6(title) msgid "Neutron deployment use cases" msgstr "" #: ./doc/install-guide/section_neutron-deploy-use-cases.xml7(para) msgid "" "This section describes how to configure the Networking service and its " "components for some typical use cases." msgstr "" #: ./doc/install-guide/section_nova-compute.xml5(title) msgid "Configure a compute node" msgstr "" #: ./doc/install-guide/section_nova-compute.xml6(para) msgid "" "After you configure the Compute service on the controller node, you must " "configure another system as a compute node. The compute node receives " "requests from the controller node and hosts virtual machine instances. You " "can run all services on a single node, but the examples in this guide use " "separate systems. This makes it easy to scale horizontally by adding " "additional Compute nodes following the instructions in this section." msgstr "" #: ./doc/install-guide/section_nova-compute.xml13(para) msgid "" "The Compute service relies on a hypervisor to run virtual machine instances." " OpenStack can use various hypervisors, but this guide uses KVM." msgstr "" #: ./doc/install-guide/section_nova-compute.xml18(para) msgid "Install the Compute packages:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml20(para) msgid "" "When prompted to create a supermin appliance, respond " "." msgstr "" #: ./doc/install-guide/section_nova-compute.xml25(para) msgid "" "To use the meta-packages and install other components on your compute node, " "such as OpenStack Networking and Ceilometer agents, run this command:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml29(para) msgid "" "The controller node has the openstack-proxy-node and " "openstack-toaster meta-packages that install openstack-proxy-node and openstack-toaster at " "the same time." msgstr "" #: ./doc/install-guide/section_nova-compute.xml41(para) msgid "" "Respond to the prompts for database management, [keystone_authtoken] " "settings, RabbitMQ " "credentials, and API " "endpoint registration." msgstr "" #: ./doc/install-guide/section_nova-compute.xml50(para) msgid "" "For security reasons, the Linux kernel is not readable by normal users which" " restricts hypervisor services such as qemu and libguestfs. For details, see" " this " "bug. To make the current kernel readable, run: To " "also enable this override for all future kernel updates, create the file " "/etc/kernel/postinst.d/statoverride " "containing: Remember to make the file executable: " "" msgstr "" #: ./doc/install-guide/section_nova-compute.xml69(para) msgid "Edit the /etc/nova/nova.conf configuration file:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml81(para) msgid "" "Edit the /etc/nova/nova.conf configuration file and add" " these lines to the appropriate sections:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml102(para) msgid "" "Configure the Compute service to use the Qpid message broker by setting " "these configuration keys:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml116(para) msgid "" "Configure the Compute service to use the RabbitMQ message broker by setting " "these configuration keys:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml125(para) msgid "Configure Compute to provide remote console access to instances." msgstr "" #: ./doc/install-guide/section_nova-compute.xml132(para) msgid "" "Edit /etc/nova/nova.conf and add the following keys " "under the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml146(para) msgid "" "Specify the host that runs the Image Service. " "Edit /etc/nova/nova.conf file and add these lines to " "the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml157(para) msgid "" "You must determine whether your system's processor and/or hypervisor support" " hardware acceleration for virtual machines." msgstr "" #: ./doc/install-guide/section_nova-compute.xml161(para) msgid "" "If this command returns a value of one or greater, your" " system supports hardware acceleration which typically requires no " "additional configuration." msgstr "" #: ./doc/install-guide/section_nova-compute.xml165(para) msgid "" "If this command returns a value of zero, your system " "does not support hardware acceleration and you must configure " "libvirt to use QEMU instead of KVM." msgstr "" #: ./doc/install-guide/section_nova-compute.xml170(para) msgid "" "Edit the [libvirt] section in the /etc/nova" "/nova-compute.conf file to modify this key:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml183(para) msgid "" "On Ubuntu 12.04, kernels backported from newer releases may not " "automatically load the KVM modules for hardware acceleration when the system" " boots. In this case, launching an instance will fail with the following " "message in the /var/log/nova/nova-compute.log file:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml189(para) msgid "" "As a workaround for this issue, you must add the appropriate module for your" " system to the /etc/modules file." msgstr "" #: ./doc/install-guide/section_nova-compute.xml192(para) msgid "For systems with Intel processors, run the following command:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml195(para) msgid "For systems with AMD processors, run the following command:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml201(para) msgid "Remove the SQLite database created by the packages:" msgstr "" #: ./doc/install-guide/section_nova-compute.xml205(para) msgid "" "Start the Compute service and configure it to start when the system boots:" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_glance-install.xml40(None) msgid "" "@@image: 'figures/debconf-screenshots/glance-common_pipeline_flavor.png'; " "md5=78bef92c36a140ad042074f6345d8917" msgstr "@@image: 'figures/debconf-screenshots/glance-common_pipeline_flavor.png'; md5=78bef92c36a140ad042074f6345d8917" #: ./doc/install-guide/section_glance-install.xml7(title) msgid "Install the Image Service" msgstr "ਤਸਵੀਰ ਸੇਵਾ ਇੰਸਟਾਲ ਕਰੋ" #: ./doc/install-guide/section_glance-install.xml8(para) msgid "" "The OpenStack Image Service acts as a registry for virtual disk images. " "Users can add new images or take a snapshot of an image from an existing " "server for immediate storage. Use snapshots for back up and as templates to " "launch new servers. You can store registered images in Object Storage or in " "other locations. For example, you can store images in simple file systems or" " external web servers." msgstr "" #: ./doc/install-guide/section_glance-install.xml16(para) msgid "" "This procedure assumes you set the appropriate environment variables to your" " credentials as described in ." msgstr "" #: ./doc/install-guide/section_glance-install.xml22(para) msgid "Install the Image Service on the controller node:" msgstr "" #: ./doc/install-guide/section_glance-install.xml29(para) msgid "" "Respond to prompts for database " "management, [keystone_authtoken] " "settings, RabbitMQ " "credentials and API " "endpoint registration. You must also select the caching type:" msgstr "" #: ./doc/install-guide/section_glance-install.xml45(para) msgid "" "The Image Service stores information about images in a database. The " "examples in this guide use the MySQL database that is used by other " "OpenStack services." msgstr "" #: ./doc/install-guide/section_glance-install.xml48(para) msgid "" "Configure the location of the database. The Image Service provides the " "glance-api and glance-registry services, each with its own " "configuration file. You must update both configuration files throughout this" " section. Replace GLANCE_DBPASS with your Image " "Service database password." msgstr "" #: ./doc/install-guide/section_glance-install.xml57(replaceable) #: ./doc/install-guide/section_glance-install.xml59(replaceable) #: ./doc/install-guide/section_glance-install.xml122(replaceable) #: ./doc/install-guide/section_glance-install.xml124(replaceable) msgid "GLANCE_DBPASS" msgstr "GLANCE_DBPASS" #: ./doc/install-guide/section_glance-install.xml60(para) msgid "" "Edit /etc/glance/glance-api.conf and " "/etc/glance/glance-registry.conf and edit the " "[database] section of each file:" msgstr "" #: ./doc/install-guide/section_glance-install.xml72(para) #: ./doc/install-guide/section_glance-install.xml79(para) #: ./doc/install-guide/section_glance-install.xml97(para) msgid "Configure the Image Service to use the message broker:" msgstr "" #: ./doc/install-guide/section_glance-install.xml82(para) msgid "" "Edit the /etc/glance/glance-api.conf file and add the " "following keys to the [DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_glance-install.xml110(para) msgid "" "By default, the Ubuntu packages create an SQLite database. Delete the " "glance.sqlite file created in the " "/var/lib/glance/ directory so that it does not get used" " by mistake:" msgstr "" #: ./doc/install-guide/section_glance-install.xml117(para) msgid "" "Use the password you created to log in as root and create a " "glance database user:" msgstr "" #: ./doc/install-guide/section_glance-install.xml127(para) msgid "Create the database tables for the Image Service:" msgstr "" #: ./doc/install-guide/section_glance-install.xml131(para) msgid "" "Create a glance user that the Image Service can use to " "authenticate with the Identity service. Choose a password and specify an " "email address for the glance user. Use the " "service tenant and give the user the " "admin role:" msgstr "" #: ./doc/install-guide/section_glance-install.xml137(replaceable) #: ./doc/install-guide/section_glance-install.xml161(replaceable) #: ./doc/install-guide/section_glance-install.xml177(replaceable) #: ./doc/install-guide/section_glance-install.xml196(replaceable) msgid "GLANCE_PASS" msgstr "GLANCE_PASS" #: ./doc/install-guide/section_glance-install.xml138(replaceable) msgid "glance@example.com" msgstr "glance@example.com" #: ./doc/install-guide/section_glance-install.xml142(para) msgid "" "Configure the Image Service to use the Identity Service for authentication." msgstr "" #: ./doc/install-guide/section_glance-install.xml144(para) msgid "" "Run the following commands and replace " "GLANCE_PASS with the password you chose for the " "glance user in the Identity Service:" msgstr "" #: ./doc/install-guide/section_glance-install.xml180(para) msgid "" "Edit the /etc/glance/glance-api.conf and " "/etc/glance/glance-registry.conf files. Replace " "GLANCE_PASS with the password you chose for the " "glance user in the Identity service." msgstr "" #: ./doc/install-guide/section_glance-install.xml187(para) msgid "" "Add or modify the following keys under the " "[keystone_authtoken] section:" msgstr "" #: ./doc/install-guide/section_glance-install.xml199(para) msgid "" "Modify the following key under the [paste_deploy] " "section:" msgstr "" #: ./doc/install-guide/section_glance-install.xml208(para) msgid "" "Register the Image Service with the Identity service so that other OpenStack" " services can locate it. Register the service and create the endpoint:" msgstr "" #: ./doc/install-guide/section_glance-install.xml220(para) msgid "" "Restart the glance service with " "its new settings:" msgstr "" #: ./doc/install-guide/section_glance-install.xml226(para) msgid "" "Start the glance-api and " "glance-registry services and " "configure them to start when the system boots:" msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml30(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-common_keep_admin_pass.png'; " "md5=01af4867c16e458306b8abd78a1fccc9" msgstr "@@image: 'figures/debconf-screenshots/dbconfig-common_keep_admin_pass.png'; md5=01af4867c16e458306b8abd78a1fccc9" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml39(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_used_for_remote_db.png'; md5=c6ec966bbfdee18ad87456cf4d44a56f" msgstr "@@image: 'figures/debconf-screenshots/dbconfig-common_used_for_remote_db.png'; md5=c6ec966bbfdee18ad87456cf4d44a56f" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml78(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-common_1_configure-with-" "dbconfig-yes-no.png'; md5=4e9d7bce27cc6c7bd68ce8622c80b60f" msgstr "@@image: 'figures/debconf-screenshots/dbconfig-common_1_configure-with-dbconfig-yes-no.png'; md5=4e9d7bce27cc6c7bd68ce8622c80b60f" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml87(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-common_2_db-types.png'; " "md5=a77beb7e13b487cf79716c2140f258c2" msgstr "@@image: 'figures/debconf-screenshots/dbconfig-common_2_db-types.png'; md5=a77beb7e13b487cf79716c2140f258c2" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml96(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_3_connection_method.png'; md5=6cc592e5dd5ea404ad7aad98b37a71f6" msgstr "@@image: 'figures/debconf-screenshots/dbconfig-common_3_connection_method.png'; md5=6cc592e5dd5ea404ad7aad98b37a71f6" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml105(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_4_mysql_root_password.png'; md5=873ec338742e37305583e9e692bcfdc6" msgstr "@@image: 'figures/debconf-screenshots/dbconfig-common_4_mysql_root_password.png'; md5=873ec338742e37305583e9e692bcfdc6" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml114(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_5_mysql_app_password.png'; md5=3651970770d05892f21d1b5741afbee6" msgstr "@@image: 'figures/debconf-screenshots/dbconfig-common_5_mysql_app_password.png'; md5=3651970770d05892f21d1b5741afbee6" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_debconf-dbconfig-common.xml123(None) msgid "" "@@image: 'figures/debconf-screenshots/dbconfig-" "common_6_mysql_app_password_confirm.png'; " "md5=060cc90aaf6f6fd5cea718064829c1b1" msgstr "@@image: 'figures/debconf-screenshots/dbconfig-common_6_mysql_app_password_confirm.png'; md5=060cc90aaf6f6fd5cea718064829c1b1" #: ./doc/install-guide/section_debconf-dbconfig-common.xml6(title) msgid "Configure the database with dbconfig-common" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml7(para) msgid "" "The dbconfig-common package provides a standard Debian " "interface that enables you to configure Debian database parameters. It " "includes localized prompts for many languages and it supports the OpenStack " "database back ends: SQLite, MySQL, and PostgreSQL." msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml12(para) msgid "" "By default, the dbconfig-common package configures the " "OpenStack services to use SQLite3. So if you use debconf " "in non-interactive mode and without pre-seeding, the OpenStack services that" " you install use SQLite3." msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml17(para) msgid "" "By default, dbconfig-common does not provide access to " "database servers over a network. If you want the dbconfig-" "common package to prompt for remote database servers that are " "accessed over a network and not through a UNIX socket file, reconfigure it, " "as follows:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml23(para) msgid "" "These screens appear when you re-configure the dbconfig-" "common package:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml43(para) msgid "" "Unlike other debconf prompts, you cannot pre-seed the " "responses for the dbconfig-common prompts by using " ". Instead, you must create a file in /etc" "/dbconfig-common. For example, you might create a keystone " "configuration file for dbconfig-common that is located in" " /etc/dbconfig-common/keystone.conf, as follows:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml66(para) msgid "After you create this file, run this command:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml68(para) msgid "" "The Identity Service is installed with MySQL as the database back end, " "keystonedb as database name, and the localhost socket " "file." msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml71(para) msgid "The cinder-common package displays these screens:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml127(para) msgid "" "To access a MySQL server remotely, you must make it accessible as root from " "a remote server. To do so, run the openstack-proxy-node " "package command:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml131(para) msgid "" "Alternatively, if you do not want to install this package, run this script " "to enable remote root access:" msgstr "" #: ./doc/install-guide/section_debconf-dbconfig-common.xml154(para) msgid "You must enable remote access before you install OpenStack services." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml79(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_1_admin_token.png'; " "md5=29a51caaf09c3d6e3f0fda73c256a17a" msgstr "@@image: 'figures/debconf-screenshots/keystone_1_admin_token.png'; md5=29a51caaf09c3d6e3f0fda73c256a17a" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml104(None) msgid "" "@@image: 'figures/debconf-" "screenshots/keystone_2_register_admin_tenant_yes_no.png'; " "md5=25c9a90b1df2d979aae6ce9975c7285b" msgstr "@@image: 'figures/debconf-screenshots/keystone_2_register_admin_tenant_yes_no.png'; md5=25c9a90b1df2d979aae6ce9975c7285b" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml113(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_3_admin_user_name.png'; " "md5=173cf7ed13252df1425109be588b2ad6" msgstr "@@image: 'figures/debconf-screenshots/keystone_3_admin_user_name.png'; md5=173cf7ed13252df1425109be588b2ad6" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml122(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_4_admin_user_email.png'; " "md5=b7f0d34350ccc0aa9ae4e766b7ac80c1" msgstr "@@image: 'figures/debconf-screenshots/keystone_4_admin_user_email.png'; md5=b7f0d34350ccc0aa9ae4e766b7ac80c1" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml131(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_5_admin_user_pass.png'; " "md5=e6b32d8d80af90f07a66abc8fb256c84" msgstr "@@image: 'figures/debconf-screenshots/keystone_5_admin_user_pass.png'; md5=e6b32d8d80af90f07a66abc8fb256c84" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml140(None) msgid "" "@@image: 'figures/debconf-" "screenshots/keystone_6_admin_user_pass_confirm.png'; " "md5=1fbf9223e4923c93030d53278d1771cc" msgstr "@@image: 'figures/debconf-screenshots/keystone_6_admin_user_pass_confirm.png'; md5=1fbf9223e4923c93030d53278d1771cc" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/section_keystone-install.xml154(None) msgid "" "@@image: 'figures/debconf-screenshots/keystone_7_register_endpoint.png'; " "md5=d24d84133bfee936267e79631a2666e6" msgstr "@@image: 'figures/debconf-screenshots/keystone_7_register_endpoint.png'; md5=d24d84133bfee936267e79631a2666e6" #: ./doc/install-guide/section_keystone-install.xml6(title) msgid "Install the Identity Service" msgstr "" #: ./doc/install-guide/section_keystone-install.xml9(para) msgid "" "Install the OpenStack Identity Service on the controller node, together with" " python-keystoneclient (which is a dependency):" msgstr "" #: ./doc/install-guide/section_keystone-install.xml17(para) msgid "" "Answer to the debconf and " "dbconfig-common questions for " "setting-up the database." msgstr "ਡਾਟਾਬੇਸ ਸੈੱਟਅਪ ਕਰਨ ਲਈ debconf ਅਤੇ dbconfig-common ਸਵਾਲਾਂ ਦੇ ਜਵਾਬ।" #: ./doc/install-guide/section_keystone-install.xml23(para) msgid "" "The Identity Service uses a database to store information. Specify the " "location of the database in the configuration file. In this guide, we use a " "MySQL database on the controller node with the username " "keystone. Replace " "KEYSTONE_DBPASS with a " "suitable password for the database user." msgstr "ਪਛਾਣ ਸੇਵਾ ਇੱਕ ਡਾਟਾਬੇਸ ਨੂੰ ਜਾਣਕਾਰੀ ਭੰਡਾਰ ਕਰਨ ਲਈ ਵਰਤਦੀ ਹੈ। ਸੰਰਚਨਾ ਫਾਈਲ ਵਿੱਚ ਡਾਟਾਬੇਸ ਦੀ ਸਥਿਤੀ ਦਰਸਾਉ। ਇਸ ਕਿਤਾਬਚੇ ਵਿੱਚ, ਅਸੀਂ ਨਿਯੰਤਰਕ ਨੋਡ ਉੱਤੇ keystone ਨਾਂ ਨਾਲ ਇੱਕ MySQL ਡਾਟਾਬੇਸ ਵਰਤਦੇ ਹਾਂ। KEYSTONE_DBPASS ਨੂੰ ਡਾਟਾਬੇਸ ਵਰਤੋਂਕਾਰ ਲਈ ਇੱਕ ਢੁਕਵੇਂ ਪਛਾਣ-ਸ਼ਬਦ ਨਾਲ ਵਟਾ ਦਿਉ।" #: ./doc/install-guide/section_keystone-install.xml30(replaceable) #: ./doc/install-guide/section_keystone-install.xml38(replaceable) #: ./doc/install-guide/section_keystone-install.xml57(replaceable) #: ./doc/install-guide/section_keystone-install.xml59(replaceable) msgid "KEYSTONE_DBPASS" msgstr "KEYSTONE_DBPASS" #: ./doc/install-guide/section_keystone-install.xml31(para) msgid "" "Edit /etc/keystone/keystone.conf and change the " "[database] section:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml44(para) msgid "" "By default, the Ubuntu packages create a SQLite database. Delete the " "keystone.db file created in the " "/var/lib/keystone/ directory so that it does not get " "used by mistake:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml51(para) msgid "" "Use the password that you set previously to log in as root. Create a " "keystone database user:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml63(para) msgid "Create the database tables for the Identity Service:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml67(para) msgid "" "Define an authorization token to use as a shared secret between the Identity" " Service and other OpenStack services. Respond to the " "debconf prompt with the value in the " "admin_token directive in the keystone.conf" " file. Use the command to generate this password." msgstr "" #: ./doc/install-guide/section_keystone-install.xml83(para) msgid "" "Later, you can verify that the " "/etc/keystone/keystone.conf file contains the password " "you have set using debconf: " msgstr "" #: ./doc/install-guide/section_keystone-install.xml91(para) msgid "" "If you omit a password (for example by pressing Enter at the " "debconf prompt, or installing Keystone using the Debconf " "non-interactive mode) the package generates a random " "ADMIN_TOKEN value." msgstr "" #: ./doc/install-guide/section_keystone-install.xml97(para) msgid "Respond to the prompts to create an administrative tenant:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml146(para) msgid "" "If this is the first time you have installed the Identity Service, register " "the Identity Service in the service catalog:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml160(para) msgid "" "Define an authorization token to use as a shared secret between the Identity" " Service and other OpenStack services. Use to generate a " "random token and store it in the configuration file:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml169(para) msgid "For SUSE Linux Enterprise use instead as first command:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml172(para) msgid "" "Edit /etc/keystone/keystone.conf and change the " "[DEFAULT] section, replacing ADMIN_TOKEN with the results" " of the command:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml182(para) msgid "" "By default, Keystone uses PKI tokens. Create the signing keys and " "certificates and restrict access to the generated data:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml189(para) msgid "" "Configure the log directory. Edit the " "/etc/keystone/keystone.conf file and update the " "[DEFAULT] section:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml197(para) msgid "Restart the Identity Service:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml201(para) msgid "" "Start the Identity Service and enable it to start when the system boots:" msgstr "" #: ./doc/install-guide/section_keystone-install.xml207(para) msgid "" "By default, the Identity Service stores expired tokens in the database " "indefinitely. While potentially useful for auditing in production " "environments, the accumulation of expired tokens will considerably increase " "database size and may decrease service performance, particularly in test " "environments with limited resources. We recommend configuring a periodic " "task using cron to purge expired " "tokens hourly." msgstr "" #: ./doc/install-guide/section_keystone-install.xml217(para) msgid "" "Run the following command to purge expired tokens every hour and log the " "output to /var/log/keystone/keystone-tokenflush.log:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml6(title) msgid "Verify the installation" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml7(para) msgid "" "You can run these commands from the proxy server or any server that has " "access to the Identity Service." msgstr "ਤੁਸੀੰ ਇਹ ਕਮਾਂਡਾਂ ਪਰਾਕਸੀ ਸਰਵਰ ਜਾਂ ਕਿਸੇ ਵੀ ਸਰਵਰ ਜਿਸ ਦਾ ਪਛਾਣ ਸੇਵਾ ਤੇ ਦਖਲ ਹੋਵੇ ਤੋਂ ਚਲਾ ਸਕਦੇ ਹੋ।" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml11(para) msgid "" "Make sure that your credentials are set up correctly in the admin-" "openrc.sh file and source it:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml15(para) msgid "Run the following command:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml27(para) msgid "" "Run the following commands to upload files to a container. " "Create the test.txt and test2.txt " "test files locally if needed." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-verifying-install.xml34(para) msgid "" "Run the following command to download all files from the " "myfiles container:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml6(title) msgid "Install and configure the proxy node" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml7(para) msgid "" "The proxy server takes each request and looks up locations for the account, " "container, or object and routes the requests correctly. The proxy server " "also handles API requests. You enable account management by configuring it " "in the /etc/swift/proxy-server.conf file." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml13(para) msgid "" "The Object Storage processes run under a separate user and group, set by " "configuration options, and referred to as swift:swift. " "The default user is swift." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml20(para) msgid "Install swift-proxy service:" msgstr "swift-proxy ਸੇਵਾ ਇੰਸਟਾਲ ਕਰੋ:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml26(para) msgid "" "Modify memcached to listen on the default interface on a local, non-public " "network. Edit this line in the /etc/memcached.conf " "file:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml30(para) msgid "Change it to:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml31(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml37(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml38(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-adding-proxy-server.xml36(replaceable) msgid "PROXY_LOCAL_NET_IP" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml34(para) msgid "" "Modify memcached to listen on the default interface on a local, non-public " "network. Edit the /etc/sysconfig/memcached file:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml41(para) msgid "Restart the memcached service:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml45(para) msgid "" "Start the memcached service and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml51(para) msgid "" "CreateEdit/etc/swift" "/proxy-server.conf:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml88(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install.xml65(replaceable) msgid "SWIFT_PASS" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml100(para) msgid "" "If you run multiple memcache servers, put the multiple IP:port listings in " "the [filter:cache] section of the /etc/swift/proxy-" "server.conf file:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml105(para) msgid "Only the proxy server uses memcache." msgstr "ਸਿਰਫ ਪਰਾਕਸੀ ਸਰਵਰ ਹੀ memcache ਵਰਤਦਾ ਹੈ।" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml109(para) msgid "" "Create the account, container, and object rings. The builder command creates" " a builder file with a few parameters. The parameter with the value of 18 " "represents 2 ^ 18th, the value that the partition is sized to. Set this " "“partition power” value based on the total amount of storage you expect your" " entire ring to use. The value 3 represents the number of replicas of each " "object, with the last value being the number of hours to restrict moving a " "partition more than once." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml125(para) msgid "For every storage device on each node add entries to each ring:" msgstr "ਹਰੇਕ ਨੋਡ ਉੱਤੇ ਹਰ ਇੱਕ ਭੰਡਾਰਣ ਯੰਤਰ ਦੇ ਹਰ ਇੱਕ ਛੱਲੇ ਲਈ ਇੰਦਰਾਜ ਜੋੜੋ:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml127(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml128(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml129(replaceable) msgid "ZONE" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml127(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml54(replaceable) msgid "STORAGE_LOCAL_NET_IP" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml127(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml128(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml129(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml80(replaceable) msgid "STORAGE_REPLICATION_NET_IP" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml127(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml128(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml129(replaceable) msgid "DEVICE" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml128(replaceable) #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml129(replaceable) msgid "STORAGE_LOCAL_NET_IP_1" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml131(para) msgid "" "You must omit the optional STORAGE_REPLICATION_NET_IP" " parameter if you do not want to use dedicated network for replication." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml135(para) msgid "" "For example, if a storage node has a partition in Zone 1 on IP 10.0.0.1, the" " storage node has address 10.0.1.1 from replication network. The mount point" " of this partition is /srv/node/sdb1, and the path in " "/etc/rsyncd.conf is /srv/node/, " "the DEVICE would be sdb1 and the commands are:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml146(para) msgid "" "If you assume five zones with one node for each zone, start ZONE at 1. For " "each additional node, increment ZONE by 1." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml152(para) msgid "Verify the ring contents for each ring:" msgstr "ਹਰੇਕ ਛੱਲੇ ਲਈ ਛੱਲੇ ਵਿਚਲੇ ਅੰਸ਼ਾਂ ਦੀ ਪਰਖ ਕਰੋ :" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml158(para) msgid "Rebalance the rings:" msgstr "ਛੱਲਿਆਂ ਨੂੰ ਮੁੜ-ਸੰਤੁਲਿਤ ਕਰੋ:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml163(para) msgid "Rebalancing rings can take some time." msgstr "ਛੱਲਿਆਂ ਨੂੰ ਮੁੜ-ਸੰਤੁਲਿਤ ਕਰਨ ਵਿੱਚ ਸਮਾਂ ਲੱਗ ਸਕਦਾ ਹੈ।" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml167(para) msgid "" "Copy the account.ring.gz, " "container.ring.gz, and " "object.ring.gz files to each of the Proxy and Storage " "nodes in /etc/swift." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml173(para) msgid "Make sure the swift user owns all configuration files:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml177(para) msgid "Restart the Proxy service:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-proxy-node.xml181(para) msgid "" "Start the Proxy service and configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-adding-proxy-server.xml6(title) msgid "Add another proxy server" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-adding-proxy-server.xml7(para) msgid "" "To provide additional reliability and bandwidth to your cluster, you can add" " proxy servers. You can set up an additional proxy node the same way that " "you set up the first proxy node but with additional configuration steps." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-adding-proxy-server.xml12(para) msgid "" "After you have more than two proxies, you must load balance them; your " "storage endpoint (what clients use to connect to your storage) also changes." " You can select from different strategies for load balancing. For example, " "you could use round-robin DNS, or a software or hardware load balancer (like" " pound) in front of the two proxies. You can then point your storage URL to " "the load balancer, configure an initial proxy node and complete these steps " "to add proxy servers." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-adding-proxy-server.xml25(para) msgid "" "Update the list of memcache servers in the /etc/swift/proxy-" "server.conf file for added proxy servers. If you run multiple " "memcache servers, use this pattern for the multiple IP:port listings in each" " proxy server configuration file:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-adding-proxy-server.xml39(para) msgid "" "Copy ring information to all nodes, including new proxy nodes. Also, ensure " "that the ring information gets to all storage nodes." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-adding-proxy-server.xml46(para) msgid "" "After you sync all nodes, make sure that the admin has keys in " "/etc/swift and the ownership for the ring file is " "correct." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml35(None) msgid "" "@@image: '../figures/networking-interactions-swift.png'; " "md5=2190892da42f344e407b4cef71b8f3cf" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml6(title) msgid "Plan networking for Object Storage" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml7(para) msgid "" "For both conserving network resources and ensuring that network " "administrators understand the needs for networks and public IP addresses for" " providing access to the APIs and storage network as necessary, this section" " offers recommendations and required minimum sizes. Throughput of at least " "1000 Mbps is suggested." msgstr "ਨੈੱਟਵਰਕ ਵਸੀਲਿਆਂ ਨੂੰ ਬਚਾਉਣ ਅਤੇ ਇਹ ਪੱਕਾ ਕਰਨ ਕਿ ਨੈੱਟਵਰਕਾਂ ਅਤੇ ਜਨਤਕ IP ਪਤਿਆਂ ਲਈ API-ਆਂ ਅਤੇ ਭੰਡਾਰਣ ਨੈੱਟਵਰਕ ਨੂੰ ਲੋੜ ਮੁਤਾਬਿਕ ਦਖਲ ਮੁਹੱਈਆ ਕਰਵਾਉਣ ਲਈ ਜਰੂਰਤਾਂ ਨੂੰ ਨੈੱਟਵਰਕ ਪ੍ਰਬੰਧਕ ਸਮਝਦੇ ਹਨ ਦੋਵਾਂ ਲਈ, ਇਹ ਹਿੱਸਾ ਸਿਫਾਰਸ਼ਾਂ ਅਤੇ ਲੋੜੀਂਦੇ ਘੱਟੋ ਘੱਟ ਅਕਾਰਾਂ ਦੀ ਪੇਸ਼ਕਸ਼ ਕਰਦਾ ਹੈ। ਮਾਤਰਾ ਘੱਟ ਤੋਂ ਘੱਟ 1000 Mbps ਹੋਣੀ ਸੁਝਾਈ ਗਈ ਹੈ।" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml15(para) msgid "A mandatory public network. Connects to the proxy server." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml19(para) msgid "" "A mandatory storage network. Not accessible from outside the cluster. All " "nodes connect to this network." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml23(para) msgid "" "An optional replication network. Not accessible from outside the cluster. " "Dedicated to replication traffic among storage nodes. Must be configured in " "the Ring." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml13(para) msgid "This guide describes the following networks:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml28(para) msgid "" "This figure shows the basic architecture for the public network, the storage" " network, and the optional replication network." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml38(para) msgid "" "By default, all of the OpenStack Object Storage services, as well as the " "rsync daemon on the storage nodes, are configured to listen on their " "STORAGE_LOCAL_NET IP addresses." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml42(para) msgid "" "If you configure a replication network in the Ring, the Account, Container " "and Object servers listen on both the STORAGE_LOCAL_NET " "and STORAGE_REPLICATION_NET IP addresses. The rsync " "daemon only listens on the STORAGE_REPLICATION_NET IP " "address." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml50(term) msgid "Public Network (Publicly routable IP range)" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml52(para) msgid "" "Provides public IP accessibility to the API endpoints within the cloud " "infrastructure." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml54(para) msgid "Minimum size: one IP address for each proxy server." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml59(term) msgid "Storage Network (RFC1918 IP Range, not publicly routable)" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml62(para) msgid "" "Manages all inter-server communications within the Object Storage " "infrastructure." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml64(para) msgid "Minimum size: one IP address for each storage node and proxy server." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml66(para) msgid "" "Recommended size: as above, with room for expansion to the largest your " "cluster size. For example, 255 or CIDR /24." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml72(term) msgid "Replication Network (RFC1918 IP Range, not publicly routable)" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml75(para) msgid "" "Manages replication-related communications among storage servers within the " "Object Storage infrastructure." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-network-planning.xml77(para) msgid "Recommended size: as for STORAGE_LOCAL_NET." msgstr "" #. When image changes, this message will be marked fuzzy or untranslated for #. you. #. It doesn't matter what you translate it to: it's not used at all. #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml52(None) msgid "" "@@image: '../figures/swift_install_arch.png'; " "md5=bbda527d20235d54a95eb29279ba2680" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml6(title) msgid "Example of Object Storage installation architecture" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml9(para) msgid "" "Node: A host machine that runs one or more OpenStack Object Storage " "services." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml13(para) msgid "Proxy node: Runs proxy services." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml16(para) msgid "" "Storage node: Runs account, container, and object services. Contains the " "SQLite databases." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml20(para) msgid "" "Ring: A set of mappings between OpenStack Object Storage data to physical " "devices." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml24(para) msgid "" "Replica: A copy of an object. By default, three copies are maintained in the" " cluster." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml28(para) msgid "" "Zone: A logically separate section of the cluster, related to independent " "failure characteristics." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml32(para) msgid "" "Region (optional): A logically separate section of the cluster, representing" " distinct physical locations such as cities or countries. Similar to zones " "but representing physical locations of portions of the cluster rather than " "logical segments." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml39(para) msgid "" "To increase reliability and performance, you can add additional proxy " "servers." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-example-install-arch.xml41(para) msgid "" "This document describes each storage node as a separate zone in the ring. At" " a minimum, five zones are recommended. A zone is a group of nodes that are " "as isolated as possible from other nodes (separate servers, network, power, " "even geography). The ring guarantees that every replica is stored in a " "separate zone. This diagram shows one possible configuration for a minimal " "installation:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml6(title) msgid "Install Object Storage" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml7(para) msgid "" "Though you can install OpenStack Object Storage for development or testing " "purposes on one server, a multiple-server installation enables the high " "availability and redundancy you want in a production distributed object " "storage system." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml11(para) msgid "" "To perform a single-node installation for development purposes from source " "code, use the Swift All In One instructions (Ubuntu) or DevStack (multiple " "distros). See http://swift.openstack.org/development_saio.html" " for manual instructions or http://devstack.org for all-in-one " "including authentication with the Identity Service (keystone) v2.0 API." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml20(para) msgid "" "In this guide we recommend installing and configuring the Identity service " "so that it implements Identity API v2.0. The Object Storage service is " "unaware of domains when implementing Access Control Lists (ACLs), so you " "must use the v2.0 API to avoid having identical user names in different " "domains, which would enable two users to access the same objects." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml29(para) msgid "" "Have a copy of the operating system installation media available if you are " "installing on a new server." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml31(para) msgid "" "These steps assume you have set up repositories for packages for your " "operating system as shown in OpenStack " "Packages." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml34(para) msgid "" "This document demonstrates how to install a cluster by using the following " "types of nodes:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml38(para) msgid "" "One proxy node which runs the swift-proxy-server processes. The proxy server" " proxies requests to the appropriate storage nodes." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml43(para) msgid "" "Five storage nodes that run the swift-account-server, swift-container-" "server, and swift-object-server processes which control storage of the " "account databases, the container databases, as well as the actual stored " "objects." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml51(para) msgid "" "Fewer storage nodes can be used initially, but a minimum of five is " "recommended for a production cluster." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml56(title) msgid "General installation steps" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml59(para) msgid "" "Create a swift user that the Object Storage Service can " "use to authenticate with the Identity Service. Choose a password and specify" " an email address for the swift user. Use the " "service tenant and give the user the " "admin role:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml66(replaceable) msgid "swift@example.com" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml70(para) msgid "Create a service entry for the Object Storage Service:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml88(para) msgid "" "Specify an API endpoint for the Object Storage Service by using the returned" " service ID. When you specify an endpoint, you provide URLs for the public " "API, internal API, and admin API. In this guide, the " "controller host name is used:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml110(para) msgid "Create the configuration directory on all nodes:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml114(para) msgid "Create /etc/swift/swift.conf on all nodes:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml120(para) msgid "" "The suffix value in /etc/swift/swift.conf should be set" " to some random string of text to be used as a salt when hashing to " "determine mappings in the ring. This file must be the same on every node in " "the cluster!" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install.xml125(para) msgid "" "Next, set up your storage nodes and proxy node. This example uses the " "Identity Service for the common authentication piece." msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml7(title) msgid "Start services on the storage nodes" msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml8(para) msgid "" "Now that the ring files are on each storage node, you can start the " "services. On each storage node, run the following command:" msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml22(para) msgid "To start all swift services at once, run the command:" msgstr "" #: ./doc/install-guide/object-storage/section_start-storage-node-services.xml24(para) msgid "To know more about swift-init command, run:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml6(title) msgid "Install and configure storage nodes" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml8(para) msgid "" "Object Storage works on any file system that supports Extended Attributes " "(XATTRS). XFS shows the best overall performance for the swift use case " "after considerable testing and benchmarking at Rackspace. It is also the " "only file system that has been thoroughly tested. See the OpenStack Configuration " "Reference for additional recommendations." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml20(para) msgid "Install storage node packages:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml29(para) msgid "" "For each device on the node that you want to use for storage, set up the XFS" " volume (/dev/sdb is used as an example). Use a single " "partition per drive. For example, in a server with 12 disks you may use one " "or two disks for the operating system which should not be touched in this " "step. The other 10 or 11 disks should be partitioned with a single " "partition, then formatted in XFS." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml46(para) msgid "Create /etc/rsyncd.conf:" msgstr "/etc/rsyncd.conf ਬਣਾਉ:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml48(para) msgid "Replace the content of /etc/rsyncd.conf with:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml75(para) msgid "" "(Optional) If you want to separate rsync and replication traffic to " "replication network, set STORAGE_REPLICATION_NET_IP " "instead of STORAGE_LOCAL_NET_IP:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml83(para) msgid "Edit the following line in /etc/default/rsync:" msgstr "/etc/default/rsync ਵਿੱਚ ਹੇਠਲੀ ਸਤਰ ਸੋਧੋ:" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml88(para) msgid "Edit the following line in /etc/xinetd.d/rsync:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml93(para) msgid "Start the rsync service:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml96(para) msgid "Start the xinetd service:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml99(para) msgid "" "Start the xinetd service and " "configure it to start when the system boots:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml105(para) msgid "" "The rsync service requires no authentication, so run it on a local, private " "network." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-install-config-storage-nodes.xml110(para) msgid "Create the swift recon cache directory and set its permissions:" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml11(title) msgid "System requirements for Object Storage" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml12(para) msgid "" "Hardware: OpenStack Object Storage is " "designed to run on commodity hardware." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml15(para) msgid "" "When you install only the Object Storage and Identity Service, you cannot " "use the dashboard unless you also install Compute and the Image Service." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml20(caption) msgid "Hardware recommendations" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml27(td) msgid "Server" msgstr "ਸਰਵਰ" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml28(td) msgid "Recommended Hardware" msgstr "ਸਿਫਾਰਸ਼ ਕੀਤਾ ਹਾਰਡਵੇਅਰ" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml34(para) msgid "Object Storage object servers" msgstr "ਆਬਜੈਕਟ ਭੰਡਾਰਣ ਆਬਜੈਕਟ ਸਰਵਰ" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml36(para) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml65(para) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml75(para) msgid "Processor: dual quad core" msgstr "ਪ੍ਰੋਸੈਸਰ: ਡਿਊਲ ਕੁਆਡ ਕੋਰ" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml37(para) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml66(para) msgid "Memory: 8 or 12 GB RAM" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml38(para) msgid "Disk space: optimized for cost per GB" msgstr "ਡਿਸਕ ਥਾਂ: ਪ੍ਰਤੀ GB ਕੀਮਤ ਲਈ ਅਨੁਕੂਲਿਤ" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml39(para) #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml67(para) msgid "Network: one 1 GB Network Interface Card (NIC)" msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml41(para) msgid "" "The amount of disk space depends on how much you can fit into the rack " "efficiently. You want to optimize these for best cost per GB while still " "getting industry-standard failure rates. At Rackspace, our storage servers " "are currently running fairly generic 4U servers with 24 2T SATA drives and 8" " cores of processing power. RAID on the storage drives is not required and " "not recommended. Swift's disk usage pattern is the worst case possible for " "RAID, and performance degrades very quickly using RAID 5 or 6." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml53(para) msgid "" "As an example, Rackspace runs Cloud Files storage servers with 24 2T SATA " "drives and 8 cores of processing power. Most services support either a " "worker or concurrency value in the settings. This allows the services to " "make effective use of the cores available." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml62(para) msgid "Object Storage container/account servers" msgstr "ਆਬਜੈਕਟ ਭੰਡਾਰਣ ਕੰਟੇਨਰ/ਖਾਤਾ ਸਰਵਰ" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml69(para) msgid "Optimized for IOPS due to tracking with SQLite databases." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml73(para) msgid "Object Storage proxy server" msgstr "ਆਬਜੈਕਟ ਭੰਡਾਰਣ ਪਰਾਕਸੀ ਸਰਵਰ" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml76(para) msgid "Network: one 1 GB Network Interface Card (NIC)" msgstr "ਨੈੱਟਵਰਕ: ਇੱਕ 1 GB ਨੈੱਟਵਰਕ ਇੰਟਰਫੇਸ ਕਾਰਡ (NIC)" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml78(para) msgid "" "Higher network throughput offers better performance for supporting many API " "requests." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml81(para) msgid "" "Optimize your proxy servers for best CPU performance. The Proxy Services are" " more CPU and network I/O intensive. If you are using 10 GB networking to " "the proxy, or are terminating SSL traffic at the proxy, greater CPU power is" " required." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml90(para) msgid "" "Operating system: OpenStack Object " "Storage currently runs on Ubuntu, RHEL, CentOS, Fedora, openSUSE, or SLES." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml93(para) msgid "" "Networking: 1 Gbps or 10 Gbps is " "suggested internally. For OpenStack Object Storage, an external network " "should connect the outside world to the proxy servers, and the storage " "network is intended to be isolated on a private network or multiple private " "networks." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml98(para) msgid "" "Database: For OpenStack Object Storage, a" " SQLite database is part of the OpenStack Object Storage container and " "account management process." msgstr "" #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml102(para) msgid "" "Permissions: You can install OpenStack " "Object Storage either as root or as a user with sudo permissions if you " "configure the sudoers file to enable all the permissions." msgstr "" #. Put one translator per line, in the form of NAME , YEAR1, YEAR2 #: ./doc/install-guide/object-storage/section_object-storage-sys-requirements.xml0(None) msgid "translator-credits" msgstr "ਅਮਨਦੀਪ ਸਿੰਘ ਸੈਣੀ "