openstack/openstack-manuals
Code Issues Proposed changes
1bc8dc4201
openstack-manuals/doc/install-guide/section_launch-instance-nova.xml
Andreas Jaeger 305f9b9d26 User name fixes 
It's "user name". Also fix markup for them to use systemitem.

Change-Id: I9bb9ac86587686a43cdd9aabd1d975cb7a7c320a
2014-07-15 21:37:04 +02:00

254 lines
16 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="UTF-8"?>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xi="http://www.w3.org/2001/XInclude"
xmlns:xlink="http://www.w3.org/1999/xlink"
version="5.0"
xml:id="launch-instance-nova">
<title>Launch an instance with legacy networking (nova-network)</title>
<procedure>
<title>To generate a keypair</title>
<para>Most cloud images support
<glossterm>public key authentication</glossterm> rather than conventional
user name/password authentication. Before launching an instance, you must
generate a public/private key pair using <command>ssh-keygen</command>
and add the public key to your OpenStack environment.</para>
<step>
<para>Source the <literal>demo</literal> tenant credentials:</para>
<screen><prompt>$</prompt> <userinput>source demo-openrc.sh</userinput></screen>
</step>
<step>
<para>Generate a key pair:</para>
<screen><prompt>$</prompt> <userinput>ssh-keygen</userinput></screen>
</step>
<step>
<para>Add the public key to your OpenStack environment:</para>
<screen><prompt>$</prompt> <userinput>nova keypair-add --pub-key ~/.ssh/id_rsa.pub demo-key</userinput></screen>
<note>
<para>This command provides no output.</para>
</note>
</step>
<step>
<para>Verify addition of the public key:</para>
<screen><prompt>$</prompt> <userinput>nova keypair-list</userinput>
<computeroutput>+----------+-------------------------------------------------+
| Name | Fingerprint |
+----------+-------------------------------------------------+
| demo-key | 6c:74:ec:3a:08:05:4e:9e:21:22:a6:dd:b2:62:b8:28 |
+----------+-------------------------------------------------+</computeroutput></screen>
</step>
</procedure>
<procedure>
<title>To launch an instance</title>
<para>To launch an instance, you must at least specify the flavor, image
name, network, security group, key, and instance name.</para>
<step>
<para>A flavor specifies a virtual resource allocation profile which
includes processor, memory, and storage.</para>
<para>List available flavors:</para>
<screen><prompt>$</prompt> <userinput>nova flavor-list</userinput>
<computeroutput>+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
| 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
| 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
| 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
| 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+</computeroutput></screen>
<para>Your first instance uses the <literal>m1.tiny</literal>
flavor.</para>
<note>
<para>You can also reference a flavor by ID.</para>
</note>
</step>
<step>
<para>List available images:</para>
<screen><prompt>$</prompt> <userinput>nova image-list</userinput>
<computeroutput>+--------------------------------------+---------------------+--------+--------+
| ID | Name | Status | Server |
+--------------------------------------+---------------------+--------+--------+
| acafc7c0-40aa-4026-9673-b879898e1fc2 | cirros-0.3.2-x86_64 | ACTIVE | |
+--------------------------------------+---------------------+--------+--------+</computeroutput></screen>
<para>Your first instance uses the
<literal>cirros-0.3.2-x86_64</literal> image.</para>
</step>
<step>
<para>List available networks:</para>
<note>
<para>You must source the <literal>admin</literal> tenant credentials
for this step and then source the <literal>demo</literal> tenant
credentials for the remaining steps.</para>
<screen><prompt>$</prompt> <userinput>source admin-openrc.sh</userinput></screen>
</note>
<screen><prompt>$</prompt> <userinput>nova net-list</userinput>
<computeroutput>+--------------------------------------+----------+------------------+
| ID | Label | CIDR |
+--------------------------------------+----------+------------------+
| 7f849be3-4494-495a-95a1-0f99ccb884c4 | demo-net | 203.0.113.24/29 |
+--------------------------------------+----------+------------------+</computeroutput></screen>
<para>Your first instance uses the <literal>demo-net</literal> tenant
network. However, you must reference this network using the ID instead
of the name.</para>
</step>
<step>
<para>List available security groups:</para>
<screen><prompt>$</prompt> <userinput>nova secgroup-list</userinput>
<computeroutput>+--------------------------------------+---------+-------------+
| Id | Name | Description |
+--------------------------------------+---------+-------------+
| ad8d4ea5-3cad-4f7d-b164-ada67ec59473 | default | default |
+--------------------------------------+---------+-------------+</computeroutput></screen>
<para>Your first instance uses the <literal>default</literal> security
group. By default, this security group implements a firewall that
blocks remote access to instances. If you would like to permit
remote access to your instance, launch it and then
<link linkend="launch-instance-nova-remoteaccess">
configure remote access</link>.</para>
</step>
<step>
<para>Launch the instance:</para>
<para>Replace <replaceable>DEMO_NET_ID</replaceable> with the ID of the
<literal>demo-net</literal> tenant network.</para>
<screen><prompt>$</prompt> <userinput>nova boot --flavor m1.tiny --image cirros-0.3.2-x86_64 --nic net-id=<replaceable>DEMO_NET_ID</replaceable> \
--security-group default --key-name demo-key <replaceable>demo-instance1</replaceable></userinput>
<computeroutput>+--------------------------------------+------------------------------------------------------------+
| Property | Value |
+--------------------------------------+------------------------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | nova |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | ThZqrg7ach78 |
| config_drive | |
| created | 2014-04-10T00:09:16Z |
| flavor | m1.tiny (1) |
| hostId | |
| id | 45ea195c-c469-43eb-83db-1a663bbad2fc |
| image | cirros-0.3.2-x86_64 (acafc7c0-40aa-4026-9673-b879898e1fc2) |
| key_name | demo-key |
| metadata | {} |
| name | demo-instance1 |
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tenant_id | 93849608fe3d462ca9fa0e5dbfd4d040 |
| updated | 2014-04-10T00:09:16Z |
| user_id | 8397567baf4746cca7a1e608677c3b23 |
+--------------------------------------+------------------------------------------------------------+</computeroutput></screen>
</step>
<step>
<para>Check the status of your instance:</para>
<screen><prompt>$</prompt> <userinput>nova list</userinput>
<computeroutput>+--------------------------------------+----------------+--------+------------+-------------+------------------------+
| ID | Name | Status | Task State | Power State | Networks |
+--------------------------------------+----------------+--------+------------+-------------+------------------------+
| 45ea195c-c469-43eb-83db-1a663bbad2fc | demo-instance1 | ACTIVE | - | Running | demo-net=203.0.113.26 |
+--------------------------------------+----------------+--------+------------+-------------+------------------------+</computeroutput></screen>
<para>The status changes from <literal>BUILD</literal> to
<literal>ACTIVE</literal> when your instance finishes the build
process.</para>
</step>
</procedure>
<procedure>
<title>To access your instance using a virtual console</title>
<step>
<para>Obtain a <glossterm>Virtual Network Computing (VNC)</glossterm>
session URL for your instance and access it from a web browser:</para>
<screen><prompt>$</prompt> <userinput>nova get-vnc-console <replaceable>demo-instance1</replaceable> novnc</userinput>
<computeroutput>+-------+------------------------------------------------------------------------------------+
| Type | Url |
+-------+------------------------------------------------------------------------------------+
| novnc | http://controller:6080/vnc_auto.html?token=2f6dd985-f906-4bfc-b566-e87ce656375b |
+-------+------------------------------------------------------------------------------------+</computeroutput></screen>
<note>
<para>If your web browser runs on a host that cannot resolve the
<replaceable>controller</replaceable> host name, you can replace
<replaceable>controller</replaceable> with the IP address of the
management interface on your controller node.</para>
</note>
<para>The CirrOS image includes conventional user name/password
authentication and provides these credentials at the login prompt.
After logging into CirrOS, we recommend that you verify network
connectivity using <command>ping</command>.</para>
<para>Verify the <literal>demo-net</literal> network:</para>
<screen><prompt>$</prompt> <userinput>ping -c 4 openstack.org</userinput>
<computeroutput>PING openstack.org (174.143.194.225) 56(84) bytes of data.
64 bytes from 174.143.194.225: icmp_req=1 ttl=53 time=17.4 ms
64 bytes from 174.143.194.225: icmp_req=2 ttl=53 time=17.5 ms
64 bytes from 174.143.194.225: icmp_req=3 ttl=53 time=17.7 ms
64 bytes from 174.143.194.225: icmp_req=4 ttl=53 time=17.5 ms
--- openstack.org ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 17.431/17.575/17.734/0.143 ms</computeroutput></screen>
</step>
</procedure>
<procedure xml:id="launch-instance-nova-remoteaccess">
<title>To access your instance remotely</title>
<step>
<para>Add rules to the <literal>default</literal> security group:</para>
<substeps>
<step>
<para>Permit <glossterm>ICMP</glossterm> (ping):</para>
<screen><prompt>$</prompt> <userinput>nova secgroup-add-rule default icmp -1 -1 0.0.0.0/0</userinput>
<computeroutput>+-------------+-----------+---------+-----------+--------------+
| IP Protocol | From Port | To Port | IP Range | Source Group |
+-------------+-----------+---------+-----------+--------------+
| icmp | -1 | -1 | 0.0.0.0/0 | |
+-------------+-----------+---------+-----------+--------------+</computeroutput></screen>
</step>
<step>
<para>Permit secure shell (SSH) access:</para>
<screen><prompt>$</prompt> <userinput>nova secgroup-add-rule default tcp 22 22 0.0.0.0/0</userinput>
<computeroutput>+-------------+-----------+---------+-----------+--------------+
| IP Protocol | From Port | To Port | IP Range | Source Group |
+-------------+-----------+---------+-----------+--------------+
| tcp | 22 | 22 | 0.0.0.0/0 | |
+-------------+-----------+---------+-----------+--------------+</computeroutput></screen>
</step>
</substeps>
</step>
<step>
<para>Verify network connectivity using <command>ping</command> from the
controller node or any host on the external network:</para>
<screen><prompt>$</prompt> <userinput>ping -c 4 203.0.113.26</userinput>
<computeroutput>PING 203.0.113.26 (203.0.113.26) 56(84) bytes of data.
64 bytes from 203.0.113.26: icmp_req=1 ttl=63 time=3.18 ms
64 bytes from 203.0.113.26: icmp_req=2 ttl=63 time=0.981 ms
64 bytes from 203.0.113.26: icmp_req=3 ttl=63 time=1.06 ms
64 bytes from 203.0.113.26: icmp_req=4 ttl=63 time=0.929 ms
--- 203.0.113.26 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3002ms
rtt min/avg/max/mdev = 0.929/1.539/3.183/0.951 ms</computeroutput></screen>
</step>
<step>
<para>Access your instance using SSH from the controller node or any
host on the external network:</para>
<screen><prompt>$</prompt> <userinput>ssh cirros@203.0.113.26</userinput>
<computeroutput>The authenticity of host '203.0.113.26 (203.0.113.26)' can't be established.
RSA key fingerprint is ed:05:e9:e7:52:a0:ff:83:68:94:c7:d1:f2:f8:e2:e9.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '203.0.113.26' (RSA) to the list of known hosts.
$</computeroutput></screen>
<note>
<para>If your host does not contain the public/private key pair created
in an earlier step, SSH prompts for the default password associated
with the <literal>cirros</literal> user.</para>
</note>
</step>
</procedure>
<para>If your instance does not launch or seem to work as you expect, see the
<link xlink:href="http://docs.openstack.org/ops">
<citetitle>OpenStack Operations Guide</citetitle></link> for more
information or use one of the
<link linkend="app_community_support">many other options</link> to seek
assistance. We want your environment to work!</para>
</section>
View Git Blame Copy Permalink