openstack/openstack-manuals
Code Issues Proposed changes
35a21be2bf
openstack-manuals/doc/user-guide/locale/pa_IN.po
OpenStack Proposal Bot 03ad8d3b2a Imported Translations from Transifex 
Change-Id: I7730ba59db98f61294d34597180cee67aa8d64db
2014-04-25 06:44:39 +00:00

4028 lines
136 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#
# Translators:
msgid ""
msgstr ""
"Project-Id-Version: OpenStack Manuals\n"
"POT-Creation-Date: 2014-04-25 00:12+0000\n"
"PO-Revision-Date: 2014-04-24 19:10+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Panjabi (Punjabi) (India) (http://www.transifex.com/projects/p/openstack-manuals-i18n/language/pa_IN/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pa_IN\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#: ./doc/user-guide/section_dashboard_create_networks.xml12(title)
msgid "Create and manage networks"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml14(para)
msgid ""
"The OpenStack Networking service provides a scalable system for managing the"
" network connectivity within an OpenStack cloud deployment. It can easily "
"and quickly react to changing network needs (for example, creating and "
"assigning new IP addresses)."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml19(para)
msgid ""
"Networking in OpenStack is complex. This section provides the basic "
"instructions for creating a network and a router. For detailed information "
"about managing networks, refer to the <link href=\"http://docs.openstack.org"
"/admin-guide-cloud/content/ch_networking.html\"><emphasis "
"role=\"italic\">OpenStack Cloud Administrator Guide</emphasis></link>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml26(title)
msgid "Create a network"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml29(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guibutton>Networks</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml33(para)
msgid "Click <guibutton>Create Network</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml36(para)
msgid "In the Create Network dialog box, specify the following values."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml44(guilabel)
msgid "Network"
msgstr "ਸੰਜਾਲ"
#: ./doc/user-guide/section_dashboard_create_networks.xml44(th)
#: ./doc/user-guide/section_dashboard_create_networks.xml53(th)
#: ./doc/user-guide/section_dashboard_create_networks.xml86(th)
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml59(th)
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml180(th)
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml206(th)
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml218(th)
msgid "<placeholder-1/> tab"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml49(guilabel)
msgid "Network Name"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml50(para)
msgid "Specify a name to identify the network."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml54(guilabel)
#: ./doc/user-guide/section_dashboard_create_networks.xml159(guilabel)
msgid "Subnet"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml57(guilabel)
msgid "Create Subnet"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml58(para)
msgid "Select this check box to create a subnet"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml59(para)
msgid ""
"You do not have to specify a subnet when you create a network, but if you do"
" not, any attached instance receives an Error status."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml64(guilabel)
msgid "Subnet Name"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml65(para)
msgid "Specify a name for the subnet."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml68(guilabel)
msgid "Network Address"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml69(para)
msgid "Specify the IP address for the subnet."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml72(guilabel)
msgid "IP Version"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml73(para)
msgid "Select IPv4 or IPv6."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml76(guilabel)
msgid "Gateway IP"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml77(para)
msgid ""
"Specify an IP address for a specific gateway. This parameter is optional."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml81(guilabel)
msgid "Disable Gateway"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml82(para)
msgid "Select this check box to disable a gateway IP address."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml86(guilabel)
msgid "Subnet Detail"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml89(guilabel)
msgid "Enable DHCP"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml90(para)
msgid "Select this check box to enable DHCP."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml93(guilabel)
msgid "Allocation Pools"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml94(para)
msgid "Specify IP address pools."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml97(guilabel)
msgid "DNS Name Servers"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml98(para)
msgid "Specify a name for the DNS server."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml101(guilabel)
msgid "Host Routes"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml102(para)
msgid "Specify the IP address of host routes."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml108(para)
msgid "Click <guilabel>Create</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml109(para)
msgid ""
"The dashboard shows the network on the <guilabel>Networks</guilabel> tab."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml115(title)
msgid "Create a router"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml118(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guibutton>Routers</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml122(para)
msgid "Click <guibutton>Create Router</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml124(para)
msgid ""
"In the Create Router dialog box, specify a name for the router and click "
"<guibutton>Create Router</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml126(para)
msgid ""
"The new router is now displayed in the <guilabel>Routers</guilabel> tab."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml130(para)
msgid "Click the new router's <guibutton>Set Gateway</guibutton> button."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml134(para)
msgid ""
"In the <guilabel>External Network</guilabel> field, specify the network to "
"which the router will connect, and then click <guibutton>Set "
"Gateway</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml139(para)
msgid ""
"To connect a private network to the newly created router, perform the "
"following steps:"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml143(para)
msgid "On the <guilabel>Routers</guilabel> tab, click the name of the router."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml147(para)
msgid "On the Router Details page, click <guilabel>Add Interface</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml151(para)
msgid "In the Add Interface dialog box, specify the following information:"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml163(para)
msgid "Select a subnet."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml168(guilabel)
msgid "IP Address (optional)"
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml171(para)
msgid "Enter the router interface IP address for the selected subnet."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml173(para)
msgid ""
"Note: If this value is not set, then by default, the first host IP address "
"in the subnet is used by OpenStack Networking."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml180(para)
msgid ""
"The <guilabel>Router Name</guilabel> and <guilabel>Router ID</guilabel> "
"fields are automatically updated."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml186(para)
msgid "Click <guilabel>Add Interface</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_create_networks.xml189(para)
msgid ""
"You have successfully created the router. You can view the new topology from"
" the <guilabel>Network Topology</guilabel> tab."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml7(title)
msgid "Use snapshots to migrate instance"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml9(para)
msgid "Some cloud providers allow only administrators to perform these steps."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml12(para)
msgid ""
"To use snapshots to migrate instances from OpenStack projects to clouds, "
"complete these steps:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml16(para)
msgid "Create a snapshot of the instance."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml19(para)
msgid "Download the snapshot as an image."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml22(para)
msgid "Import the snapshot to the new environment."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml25(para)
msgid "Boot a new instance from the snapshot."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml29(para)
msgid ""
"Perform the <xref linkend=\"create_snapshot\"/> and <xref "
"linkend=\"download_snapshot\"/> procedures in the source project."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml32(para)
msgid ""
"Perform the <xref linkend=\"import_snapshot\"/> and <xref "
"linkend=\"boot_from_snapshot\"/> in the destination project."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml37(title)
msgid "Create a snapshot of the instance"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml40(para)
msgid ""
"Always shut down the source VM before you take the snapshot to make sure "
"that all data is flushed to disk."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml52(para)
msgid "Confirm that the instance shows a <literal>SHUTOFF</literal> status."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml63(para)
msgid ""
"Use the <placeholder-1/> command to take a snapshot. Use the "
"<placeholder-2/> command to check the status until the status is "
"<literal>ACTIVE</literal>:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml73(replaceable)
msgid "example"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml73(replaceable)
msgid "examplesnapshot"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml88(title)
msgid "Download the snapshot as an image"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml91(para)
msgid "Get the image ID:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml100(para)
msgid ""
"Download the snapshot by using the image ID that was returned in the "
"previous step:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml102(replaceable)
msgid "snapshot.raw"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml102(replaceable)
msgid "f30b204e-1ce6-40e7-b8d9-b353d4d84e7d"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml104(para)
msgid ""
"The <placeholder-1/> command requires the image ID and cannot use the image "
"name."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml107(para)
msgid ""
"Ensure there is sufficient space on the destination file system for the "
"image file."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml113(para)
msgid ""
"Make the image available to the new environment, either through http or with"
" direct upload to a machine (<placeholder-1/>)."
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml120(title)
msgid "Import the snapshot to new environment"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml123(para)
msgid "In the new project or cloud environment, import the snapshot:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml125(replaceable)
msgid "IMAGE_URL"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml130(title)
msgid "Boot a new instance from the snapshot"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml133(para)
msgid ""
"In the new project or cloud environment, use the snapshot to create the new "
"instance:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml135(replaceable)
msgid "EXAMPLE_SNAPSHOT"
msgstr ""
#: ./doc/user-guide/section_cli_nova_migrate_instances.xml135(replaceable)
msgid "NEW_INSTANCE"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml13(title)
msgid "Manage volumes"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml15(para)
msgid ""
"Volumes are block storage devices that you attach to instances to enable "
"persistent storage. You can attach a volume to a running instance or detach "
"a volume and attach it to another instance at any time. You can also create "
"a snapshot from or delete a volume. Only administrative users can create "
"volume types."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml22(title)
msgid "Create a volume"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml26(para)
#: ./doc/user-guide/section_dashboard_manage_volumes.xml124(para)
#: ./doc/user-guide/section_dashboard_manage_volumes.xml161(para)
#: ./doc/user-guide/section_dashboard_manage_volumes.xml208(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guibutton>Volumes</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml30(para)
#: ./doc/user-guide/section_dashboard_manage_volumes.xml109(para)
msgid "Click <guibutton>Create Volume</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml31(para)
msgid "In the dialog box that opens, enter or select the following values."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml40(guilabel)
msgid "Volume Name"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml44(para)
msgid "Specify a name for the volume."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml51(guilabel)
#: ./doc/user-guide/section_dashboard_manage_images.xml64(guilabel)
msgid "Description"
msgstr "ਵੇਰਵਾ"
#: ./doc/user-guide/section_dashboard_manage_volumes.xml55(para)
msgid "Optionally, provide a brief description for the volume."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml62(guilabel)
msgid "Type"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml66(para)
msgid "Leave this field blank."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml72(guilabel)
msgid "Size (GB)"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml76(para)
msgid "The size of the volume in gigabytes."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml83(guilabel)
msgid "Volume Source"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml87(para)
msgid "Select one of the following options:"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml91(para)
msgid "<guilabel>No source, empty volume</guilabel>: creates an empty volume."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml93(para)
msgid ""
"Note: An empty volume does not contain a file system or a partition table."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml97(para)
msgid ""
"<guilabel>Image</guilabel>: creates a volume from an image. Select the image"
" from the list."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml113(para)
msgid ""
"The dashboard shows the volume on the <guilabel>Volumes</guilabel> tab."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml117(title)
msgid "Attach a volume to an instance"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml118(para)
msgid ""
"After you create one or more volumes, you can attach them to instances. You "
"can attach a volume to one instance at a time."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml128(para)
msgid ""
"Select the volume to add to an instance and click <guibutton>Edit "
"Attachments</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml132(para)
msgid "In the Manage Volume Attachments dialog box, select an instance."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml137(para)
msgid ""
"Enter the name of the device from which the volume is accessible by the "
"instance."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml140(para)
msgid ""
"The actual device name might differ from the volume name because of "
"hypervisor settings."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml146(para)
msgid "Click <guibutton>Attach Volume</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml147(para)
msgid ""
"The dashboard shows the instance to which the volume is now attached and the"
" device name."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml151(para)
msgid ""
"You can view the status of a volume in the <guilabel>Volumes</guilabel> tab "
"of the dashboard. The volume is either Available or In-Use."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml154(para)
msgid ""
"Now you can log in to the instance and mount, format, and use the disk."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml158(title)
msgid "Detach a volume from an instance"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml165(para)
msgid "Select the volume and click <guibutton>Edit Attachments</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml169(para)
msgid "Click <guibutton>Detach Volume</guibutton> and confirm your changes."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml173(para)
#: ./doc/user-guide/section_dashboard_manage_volumes.xml218(para)
msgid "A message indicates whether the action was successful."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml177(title)
msgid "Create a snapshot from a volume"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml180(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guilabel>Volumes</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml184(para)
msgid "Select a volume from which to create a snapshot."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml187(para)
msgid ""
"From the <guilabel>More</guilabel> list, select <guilabel>Create "
"Snapshot</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml191(para)
msgid ""
"In the dialog box that opens, enter a snapshot name and a brief description."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml195(para)
msgid "Confirm your changes."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml196(para)
msgid ""
"The dashboard shows the new volume snapshot in <guilabel>Images &amp; "
"Snapshots</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml203(title)
msgid "Delete a volume"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml204(para)
msgid ""
"When you delete an instance, the data in its attached volumes is not "
"destroyed."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml212(para)
msgid "Select the check boxes for the volumes that you want to delete."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_volumes.xml216(para)
msgid "Click <guibutton>Delete Volumes</guibutton> and confirm your choice."
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml7(title)
msgid "Manage images"
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml9(title)
msgid "List images"
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml10(para)
msgid ""
"To list the available images, call the <methodname> "
"glanceclient.v2.images.Controller.list</methodname> method:"
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml16(para)
msgid ""
"The <methodname>images</methodname> method returns a Python generator, as "
"shown in the following interaction with the Python interpreter:"
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml76(title)
msgid "Get image by ID"
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml77(para)
msgid ""
"To retrieve an image object from its ID, call the <methodname> "
"glanceclient.v2.images.Controller.get</methodname> method:"
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml87(title)
msgid "Get image by name"
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml88(para)
msgid ""
"The Image Service Python bindings do not support the retrieval of an image "
"object by name. However, the Compute Python bindings enable you to get an "
"image object by name. To get an image object by name, call the <methodname> "
"novaclient.v1_1.images.ImageManager.find</methodname> method:"
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml100(title)
#: ./doc/user-guide/section_dashboard_manage_images.xml28(title)
msgid "Upload an image"
msgstr ""
#: ./doc/user-guide/section_sdk_manage_images.xml101(para)
msgid ""
"To upload an image, call the <methodname> "
"glanceclient.v2.images.ImageManager.create</methodname> method:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml9(title)
msgid "Create and manage stacks"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml10(para)
#: ./doc/user-guide/section_dashboard_stacks.xml29(para)
msgid ""
"The template languages are described in <link "
"href=\"http://docs.openstack.org/developer/heat/template_guide/index.html\">the"
" Template Guide</link> in the <link "
"href=\"http://docs.openstack.org/developer/heat/\">Heat developer "
"documentation</link>."
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml17(title)
msgid "Create a stack from an example template file"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml20(para)
msgid ""
"To create a stack, or template, from an <link "
"href=\"https://github.com/openstack/heat-templates\">example template "
"file</link>, run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml24(replaceable)
#: ./doc/user-guide/section_cli_heat.xml45(replaceable)
msgid "PATH_TO_HEAT_TEMPLATES"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml25(replaceable)
msgid "USERNAME"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml25(replaceable)
msgid "PASSWORD"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml25(replaceable)
msgid "HEAT_KEY"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml26(para)
msgid ""
"The <literal>--parameters</literal> values that you specify depend on the "
"parameters that are defined in the template. If a website hosts the template"
" file, you can specify the URL with the <literal>--template-url</literal> "
"parameter instead of the <literal>--template-file</literal> parameter."
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml32(para)
msgid "The command returns the following output:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml40(para)
msgid ""
"You can also use the <placeholder-1/> command to validate a template file "
"without creating a stack from it."
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml44(para)
msgid "To do so, run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml46(para)
msgid "If validation fails, the response returns an error message."
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml52(title)
msgid "Get information about stacks"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml53(para)
msgid ""
"To explore the state and history of a particular stack, you can run a number"
" of commands."
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml57(para)
msgid ""
"To see which stacks are visible to the current user, run the following "
"command:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml68(para)
msgid "To show the details of a stack, run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml73(para)
msgid "A stack consists of a collection of resources."
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml75(para)
msgid "To list the resources and their status, run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml85(para)
msgid ""
"To show the details for the specified resource in a stack, run the following"
" command:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml88(para)
msgid ""
"Some resources have associated metadata which can change throughout the "
"life-cycle of a resource:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml94(para)
msgid "A series of events is generated during the life-cycle of a stack."
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml96(para)
msgid "To display life-cycle events, run:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml106(para)
msgid "To show the details for a particular event, run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml113(title)
msgid "Update a stack"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml116(para)
msgid ""
"To update an existing stack from a modified template file, run a command "
"like the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_heat.xml127(para)
msgid ""
"Some resources are updated in-place, while others are replaced with new "
"resources."
msgstr ""
#: ./doc/user-guide/ch_sdk.xml6(title)
msgid "OpenStack Python SDK"
msgstr ""
#: ./doc/user-guide/ch_sdk.xml8(para)
msgid ""
"Use the OpenStack Python Software Development Kit (SDK) to write Python "
"automation scripts that create and manage resources in your OpenStack cloud."
" The SDK implements Python bindings to the OpenStack API, which enables you "
"to perform automation tasks in Python by making calls on Python objects "
"rather than making REST calls directly. All OpenStack command-line tools are"
" implemented using the Python SDK."
msgstr ""
#: ./doc/user-guide/ch_sdk.xml15(para)
msgid "You should also be familiar with:"
msgstr ""
#: ./doc/user-guide/ch_sdk.xml18(para)
msgid "RESTful web services"
msgstr ""
#: ./doc/user-guide/ch_sdk.xml21(para)
msgid "HTTP/1.1"
msgstr ""
#: ./doc/user-guide/ch_sdk.xml24(para)
msgid "JSON and XML data serialization formats"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml12(title)
#: ./doc/user-guide/section_sdk_configure_instances.xml6(title)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml17(title)
msgid "Configure access and security for instances"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml14(para)
msgid ""
"Before you launch an instance, you should add security group rules to enable"
" users to ping and use SSH to connect to the instance. To do so, you either "
"<link href=\"#security_groups_add_rule\">add rules to the default security "
"group</link> or add a security group with rules."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml20(para)
msgid ""
"Key pairs are SSH credentials that are injected into an instance when it is "
"launched. To use key pair injection, the image that the instance is based on"
" must contain the <literal>cloud-init</literal> package. Each project should"
" have at least one key pair. For more information, see <xref "
"linkend=\"keypair_add\"/>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml26(para)
msgid ""
"If you have generated a key pair with an external tool, you can import it "
"into OpenStack. The key pair can be used for multiple instances that belong "
"to a project. For more information, see <xref "
"linkend=\"dashboard_import_keypair\"/>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml31(para)
msgid ""
"When an instance is created in OpenStack, it is automatically assigned a "
"fixed IP address in the network to which the instance is assigned. This IP "
"address is permanently associated with the instance until the instance is "
"terminated. However, in addition to the fixed IP address, a floating IP "
"address can also be attached to an instance. Unlike fixed IP addresses, "
"floating IP addresses are able to have their associations modified at any "
"time, regardless of the state of the instances involved."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml41(title)
msgid "Add a rule to the default security group"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml42(para)
msgid ""
"This procedure enables SSH and ICMP (ping) access to instances. The rules "
"apply to all instances within a given project, and should be set for every "
"project unless there is a reason to prohibit SSH or ICMP access to the "
"instances."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml47(para)
msgid ""
"This procedure can be adjusted as necessary to add additional security group"
" rules to a project, if your cloud requires them."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml52(para)
msgid ""
"Log in to the dashboard, choose a project, and click <guilabel>Access &amp; "
"Security</guilabel>. The <guilabel>Security Groups</guilabel> tab shows the "
"security groups that are available for this project."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml59(para)
msgid ""
"Select the <guilabel>default</guilabel> security group and click "
"<guibutton>Edit Rules</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml64(para)
msgid "To allow SSH access, click <guibutton>Add Rule</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml68(para)
#: ./doc/user-guide/section_dashboard_access_and_security.xml111(para)
msgid "In the Add Rule dialog box, enter the following values:"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml75(guilabel)
#: ./doc/user-guide/section_dashboard_access_and_security.xml117(guilabel)
msgid "Rule"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml77(literal)
msgid "SSH"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml81(guilabel)
#: ./doc/user-guide/section_dashboard_access_and_security.xml125(guilabel)
msgid "Remote"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml84(literal)
#: ./doc/user-guide/section_dashboard_access_and_security.xml88(guilabel)
#: ./doc/user-guide/section_dashboard_access_and_security.xml126(literal)
#: ./doc/user-guide/section_dashboard_access_and_security.xml129(guilabel)
msgid "CIDR"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml90(literal)
#: ./doc/user-guide/section_dashboard_access_and_security.xml130(literal)
msgid "0.0.0.0/0"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml96(para)
msgid ""
"To accept requests from a particular range of IP addresses, specify the IP "
"address block in the <guilabel>CIDR</guilabel> box."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml102(para)
#: ./doc/user-guide/section_dashboard_access_and_security.xml135(para)
msgid "Click <guibutton>Add</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml103(para)
msgid ""
"Instances will now have SSH port 22 open for requests from any IP address."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml107(para)
msgid "To add an ICMP rule, click <guibutton>Add Rule</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml118(literal)
msgid "All ICMP"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml121(guilabel)
msgid "Direction"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml122(literal)
msgid "Ingress"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml136(para)
msgid "Instances will now accept all incoming ICMP packets."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml142(title)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml79(title)
msgid "Add a key pair"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml143(para)
msgid "Create at least one key pair for each project."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml146(para)
#: ./doc/user-guide/section_dashboard_access_and_security.xml175(para)
#: ./doc/user-guide/section_dashboard_access_and_security.xml243(para)
msgid ""
"Log in to the dashboard, choose a project, and click <guilabel>Access &amp; "
"Security</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml151(para)
#: ./doc/user-guide/section_dashboard_access_and_security.xml180(para)
msgid ""
"Click the <guilabel>Keypairs</guilabel> tab, which shows the key pairs that "
"are available for this project."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml156(para)
msgid "Click <guibutton>Create Keypair</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml160(para)
msgid ""
"In the Create Keypair dialog box, enter a name for your key pair, and click "
"<guibutton>Create Keypair</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml166(para)
msgid "Respond to the prompt to download the key pair."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml172(title)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml101(title)
msgid "Import a key pair"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml185(para)
msgid "Click <guibutton>Import Keypair</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml189(para)
msgid ""
"In the Import Keypair dialog box, enter the name of your key pair, copy the "
"public key into the <guilabel>Public Key</guilabel> box, and then click "
"<guibutton>Import Keypair</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml196(para)
msgid "Save the <filename>*.pem</filename> file locally."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml198(para)
msgid ""
"To change its permissions so that only you can read and write to the file, "
"run the following command:"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml201(replaceable)
#: ./doc/user-guide/section_dashboard_access_and_security.xml217(replaceable)
msgid "yourPrivateKey"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml203(para)
msgid ""
"If you are using the dashboard from a Windows computer, use PuTTYgen to load"
" the <filename>*.pem</filename> file and convert and save it as "
"<filename>*.ppk</filename>. For more information see the <link "
"href=\"http://winscp.net/eng/docs/ui_puttygen\">WinSCP web page for "
"PuTTYgen</link>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml215(para)
msgid "To make the key pair known to SSH, run the <placeholder-1/> command."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml220(para)
msgid "The Compute database registers the public key of the key pair."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml222(para)
msgid ""
"The dashboard lists the key pair on the <guilabel>Access &amp; "
"Security</guilabel> tab."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml226(title)
msgid "Allocate a floating IP address to an instance"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml227(para)
msgid ""
"When an instance is created in OpenStack, it is automatically assigned a "
"fixed IP address in the network to which the instance is assigned. This IP "
"address is permanently associated with the instance until the instance is "
"terminated."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml233(para)
msgid ""
"However, in addition to the fixed IP address, a floating IP address can also"
" be attached to an instance. Unlike fixed IP addresses, floating IP "
"addresses can have their associations modified at any time, regardless of "
"the state of the instances involved. This procedure details the reservation "
"of a floating IP address from an existing pool of addresses and the "
"association of that address with a specific instance."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml247(para)
msgid ""
"Click the <guilabel>Floating IPs</guilabel> tab, which shows the floating IP"
" addresses allocated to instances."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml252(para)
msgid "Click <guibutton>Allocate IP to Project</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml255(para)
msgid "Choose the pool from which to pick the IP address."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml259(para)
msgid "Click <guibutton>Allocate IP</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml262(para)
msgid ""
"In the <guilabel>Floating IPs</guilabel> list, click <guibutton> "
"Associate</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml270(para)
msgid ""
"The <guilabel>IP Address</guilabel> field is filled automatically, but you "
"can add a new IP address by clicking the <guibutton>+</guibutton> button."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml277(para)
msgid ""
"In the <guilabel>Ports to be associated</guilabel> field, select a port from"
" the list."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml280(para)
msgid "The list shows all the instances with their fixed IP addresses."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml266(para)
msgid ""
"In the Manage Floating IP Associations dialog box, choose the following "
"options: <placeholder-1/>"
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml287(para)
msgid "Click <guibutton>Associate</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml291(para)
msgid ""
"To disassociate an IP address from an instance, click the "
"<guibutton>Disassociate</guibutton> button."
msgstr ""
#: ./doc/user-guide/section_dashboard_access_and_security.xml293(para)
msgid ""
"To release the floating IP address back into the pool of addresses, click "
"the <guibutton>More</guibutton> button and select the <guilabel>Release "
"Floating IP</guilabel> option."
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml6(title)
msgid "Manage objects and containers"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml8(para)
msgid ""
"The OpenStack Object Storage Service provides the <placeholder-1/> client, "
"which is a command-line interface (CLI). Use this client to list objects and"
" containers, upload objects to containers, and download or delete objects "
"from containers. You can also gather statistics and update metadata for "
"accounts, containers, and objects."
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml14(para)
msgid ""
"This client is based on the native swift client library, "
"<literal>client.py</literal>, which seamlessly re-authenticates if the "
"current token expires during processing, retries operations multiple times, "
"and provides a processing concurrency of 10."
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml20(title)
msgid "Create and manage containers"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml23(para)
msgid "To create a container:"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml25(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml69(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml90(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml93(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml97(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml112(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml117(replaceable)
msgid "CONTAINER"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml26(para)
msgid ""
"Replace <replaceable>CONTAINER</replaceable> with the name of your "
"container."
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml27(para)
msgid ""
"Users have roles on accounts. For example, a user with the admin role has "
"full access to all containers and objects in an account. You can set access "
"control lists (ACLs) at the container level and support lists for read and "
"write access, which you set with the <literal>X-Container-Read</literal> and"
" <literal>X-Container-Write</literal> header, respectively."
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml34(para)
msgid ""
"To give a user read access, use the <placeholder-1/> command with the "
"<parameter>-r</parameter> parameter. To give a user write access, use the "
"<parameter>-w</parameter> parameter."
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml38(para)
msgid ""
"The following example enables the <literal>testuser</literal> user to read "
"objects in the container:"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml42(para)
msgid "You can also use this command with a list of users."
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml43(para)
msgid ""
"If you use StaticWeb middleware to enable Object Storage to serve public web"
" content, use <literal>.r:</literal>, followed by a list of allowed "
"referrers."
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml46(para)
msgid "The following command gives object access to all referring domains:"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml51(para)
msgid "To list all containers:"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml56(para)
msgid "To check the status of containers:"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml66(para)
msgid ""
"You can also use the <placeholder-1/> command with the "
"<replaceable>ACCOUNT</replaceable> or <replaceable>CONTAINER</replaceable> "
"names as parameters."
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml85(title)
msgid "Manage objects"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml88(para)
msgid "To upload an object to a container:"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml90(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml93(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml97(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml112(replaceable)
#: ./doc/user-guide/section_cli_swift_howto.xml117(replaceable)
msgid "OBJECT_FILENAME"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml91(para)
msgid "To upload in chunks, for large files:"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml93(replaceable)
msgid "CHUNK_SIZE"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml96(para)
msgid "To check the status of the object:"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml110(para)
msgid "To list objects in a container:"
msgstr ""
#: ./doc/user-guide/section_cli_swift_howto.xml115(para)
msgid "To download an object from a container:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml10(title)
msgid "Store metadata on a configuration drive"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml11(para)
msgid ""
"You can configure OpenStack to write metadata to a special configuration "
"drive that attaches to the instance when it boots. The instance can mount "
"this drive and read files from it to get information that is normally "
"available through the <link href=\"http://docs.openstack.org/admin-guide-"
"cloud/content/section_metadata-service.html\">metadata service</link>."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml18(para)
msgid ""
"One use case for the configuration drive is to pass a networking "
"configuration when you do not use DHCP to assign IP addresses to instances. "
"For example, you might pass the IP configuration for the instance through "
"the configuration drive, which the instance can mount and access before you "
"configure the network settings for the instance."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml24(para)
msgid ""
"Any modern guest operating system that is capable of mounting an ISO9660 or "
"VFAT file system can use the configuration drive."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml28(title)
msgid "Requirements and guidelines"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml30(title)
msgid "Compute host requirements"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml32(para)
msgid ""
"The following hypervisors support the configuration drive: libvirt, "
"xenserver, hyper-v, and vmware."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml37(para)
msgid ""
"To use configuration drive with libvirt, xenserver, or vmware, you must "
"first install the <package>genisoimage</package> package on each compute "
"host. Otherwise, instances do not boot properly."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml43(para)
msgid ""
"Use the <literal>mkisofs_cmd</literal> flag to set the path where you "
"install the <package>genisoimage</package> program. If "
"<package>genisoimage</package> is in same path as the <systemitem "
"class=\"service\">nova-compute</systemitem> service, you do not need to set "
"this flag."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml52(para)
msgid ""
"To use configuration drive with hyper-v, you must set the "
"<literal>mkisofs_cmd</literal> value to the full path to an "
"<literal>mkisofs.exe</literal> installation. Additionally, you must set the "
"<literal>qemu_img_cmd</literal> value in the <literal>hyperv</literal> "
"configuration section to the full path to an <literal>qemu-img</literal> "
"command installation."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml65(title)
msgid "Image requirements"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml67(para)
msgid ""
"An image built with a recent version of the <package>cloud-init</package> "
"package can automatically access metadata passed through the configuration "
"drive. The <package>cloud-init</package> package version 0.7.1 works with "
"Ubuntu and Fedora-based images, such as RHEL."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml76(para)
msgid ""
"If an image does not have the <package>cloud-init</package> package "
"installed, you must customize the image to run a script that mounts the "
"configuration drive on boot, reads the data from the drive, and takes "
"appropriate action such as adding the public key to an account. See <xref "
"linkend=\"config_drive_contents\"/> for details on how data is organized on "
"the configuration drive."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml88(para)
msgid ""
"If you use Xen with a configuration drive, use the "
"<literal>xenapi_disable_agent</literal> configuration parameter to disable "
"the agent."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml95(title)
msgid "Guidelines"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml97(para)
msgid ""
"Do not rely on the presence of the EC2 metadata present in the configuration"
" drive, as this content might be removed in a future release. For example, "
"do not rely on files in the <filename>ec2</filename> directory."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml104(para)
msgid ""
"When you create images that access configuration drive data and multiple "
"directories are under the <filename>openstack</filename> directory, always "
"select the highest API version by date that your consumer supports. For "
"example, if your guest image supports the 2012-03-05, 2012-08-05, 2013-04-13"
" versions, try 2013-04-13 first and fall back to a previous version if "
"2013-04-13 is not present."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml117(title)
msgid "Enable and access the configuration drive"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml120(para)
msgid ""
"To enable the configuration drive, pass the <literal>--config-"
"drive=true</literal> parameter to the <placeholder-1/> command."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml124(para)
msgid ""
"This example enables the configuration drive and passes user data, two "
"files, and two key/value metadata pairs, all of which are accessible from "
"the configuration drive:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml129(para)
msgid ""
"You can also configure the Compute service to always create a configuration "
"drive."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml131(para)
msgid "Set this option in the <filename>/etc/nova/nova.conf</filename> file:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml136(para)
msgid ""
"If a user passes the <parameter>--config-drive=true</parameter> flag to the "
"<placeholder-1/> command, an administrator cannot disable the configuration "
"drive."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml144(para)
msgid ""
"The configuration drive has the <literal>config-2</literal> volume label. If"
" your guest operating system supports accessing disk by label, you can mount"
" the configuration drive as the <filename>/dev/disk/by-"
"label/config-2</filename> device."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml151(para)
msgid "For example:"
msgstr "ਉਦਾਹਰਣ ਲਈ:"
#: ./doc/user-guide/section_cli_nova_config-drive.xml155(para)
msgid ""
"Make sure that you use at least version 0.3.1 of CirrOS for configuration "
"drive support."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml158(para)
msgid ""
"If your guest operating system does not use <literal>udev</literal>, the "
"<filename>/dev/disk/by-label</filename> directory is not present."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml162(para)
msgid ""
"You can use the <placeholder-1/> command to identify the block device that "
"corresponds to the configuration drive. For example, when you boot the "
"CirrOS image with the <literal>m1.tiny</literal> flavor, the device is "
"<filename>/dev/vdb</filename>:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml170(para)
msgid "Once identified, you can mount the device:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml177(title)
msgid "Configuration drive contents"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml178(para)
msgid "In this example, the contents of the configuration drive are:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml191(para)
msgid ""
"The files that appear on the configuration drive depend on the arguments "
"that you pass to the <placeholder-1/> command."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml196(title)
msgid "OpenStack metadata format"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml197(para)
msgid ""
"The following example shows the contents of the "
"<filename>openstack/2012-08-10/meta_data.json</filename> and "
"<filename>openstack/latest/meta_data.json</filename> files. These files are "
"identical. The file contents are formatted for readability:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml204(para)
msgid ""
"Note the effect of the <literal>--file /etc/network/interfaces=/home/myuser"
"/instance-interfaces</literal> argument that was passed to the "
"<placeholder-1/> command. The contents of this file are contained in the "
"<filename>openstack/content/0000</filename> file on the configuration drive,"
" and the path is specified as <filename>/etc/network/interfaces</filename> "
"in the <filename>meta_data.json</filename> file."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml215(title)
msgid "EC2 metadata format"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml216(para)
msgid ""
"The following example shows the contents of the <filename>ec2/2009-04-04"
"/meta-data.json</filename>, <filename>latest/meta-data.json</filename> "
"files. These files are identical. The file contents are formatted to improve"
" readability:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml224(title)
msgid "User data"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml225(para)
msgid ""
"The <filename>openstack/2012-08-10/user_data</filename>, "
"<filename>openstack/latest/user_data</filename>, <filename>ec2/2009-04-04"
"/user-data</filename>, and <filename>ec2/latest/user-data</filename> file "
"are present only if the <literal>--user-data</literal> flag and the contents"
" of the user data file are passed to the <placeholder-1/> command."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml235(title)
msgid "Configuration drive format"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml236(para)
msgid ""
"The default format of the configuration drive as an ISO 9660 file system. To"
" explicitly specify the ISO 9660 format, add the following line to the "
"<filename>/etc/nova/nova.conf</filename> file:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml242(para)
msgid ""
"By default, you cannot attach the configuration drive image as a CD drive "
"instead of as a disk drive. To attach a CD drive, add this line to the "
"<filename>/etc/nova/nova.conf</filename> file:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml248(para)
msgid ""
"For legacy reasons, you can configure the configuration drive to use VFAT "
"format instead of ISO 9660. It is unlikely that you would require VFAT "
"format because ISO 9660 is widely supported across operating systems. "
"However, to use the VFAT format, add the following line to the "
"<filename>/etc/nova/nova.conf</filename> file:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml257(para)
msgid "If you choose VFAT, the configuration drive is 64 MB."
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml262(title)
msgid "Configuration drive reference"
msgstr ""
#: ./doc/user-guide/section_cli_nova_config-drive.xml263(para)
msgid ""
"The following table shows the configuration options for the configuration "
"drive:"
msgstr ""
#: ./doc/user-guide/section_sdk_install.xml6(title)
msgid "Install the OpenStack SDK"
msgstr ""
#: ./doc/user-guide/section_sdk_install.xml7(para)
msgid ""
"Each OpenStack project has its own Python library. These libraries are "
"bundled with the command-line clients. For example, the Python bindings for "
"the Compute API are bundled with the <package>python-novaclient</package> "
"package."
msgstr ""
#: ./doc/user-guide/section_sdk_install.xml11(para)
msgid ""
"For details about how to install the clients, see <link "
"linkend=\"install_clients\">install the OpenStack command-line "
"clients</link>."
msgstr ""
#: ./doc/user-guide/section_sdk_auth_neutron.xml6(title)
msgid "Authenticate against a Networking endpoint"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_neutron.xml7(para)
msgid ""
"To authenticate against a Networking endpoint, instantiate a "
"<classname>neutronclient.v_2_0.client.Client</classname> object:"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_neutron.xml18(para)
msgid ""
"You can also authenticate by explicitly specifying the endpoint and token:"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml6(title)
msgid "Compute"
msgstr "ਮੁਲ-ਆਂਕਣ"
#: ./doc/user-guide/section_sdk_nova.xml8(para)
msgid ""
"To use the information in this section, you should have a general "
"understanding of OpenStack Compute."
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml11(title)
#: ./doc/user-guide/section_sdk_neutron.xml14(title)
msgid "Set environment variables"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml12(para)
msgid ""
"Please see <xref linkend=\"sdk_auth\"/> on how to setup environmental "
"variables and authenticate against Compute API endpoints."
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml16(title)
msgid "Get nova credentials v2"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml17(para)
msgid ""
"The examples in this section use the <code>get_nova_credentials_v2</code> "
"method:"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml27(para)
#: ./doc/user-guide/section_sdk_neutron.xml35(para)
#: ./doc/user-guide/section_sdk_neutron.xml53(para)
msgid ""
"This code resides in the <filename>credentials.py</filename> file, which all"
" samples import."
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml30(para)
msgid ""
"Use the <code>get_nova_credentials_v2()</code> method to populate and get a "
"dictionary:"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml36(title)
msgid "List servers v2"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml37(para)
msgid "The following program lists servers using the v2 APIs:"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml39(title)
msgid "To list the servers"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml41(para)
#: ./doc/user-guide/section_sdk_nova.xml83(para)
#: ./doc/user-guide/section_sdk_nova.xml164(para)
#: ./doc/user-guide/section_sdk_neutron.xml255(para)
#: ./doc/user-guide/section_sdk_neutron.xml340(para)
#: ./doc/user-guide/section_sdk_neutron.xml416(para)
#: ./doc/user-guide/section_sdk_neutron.xml468(para)
#: ./doc/user-guide/section_sdk_neutron.xml519(para)
msgid "Import the following modules:"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml46(para)
#: ./doc/user-guide/section_sdk_nova.xml89(para)
#: ./doc/user-guide/section_sdk_nova.xml170(para)
msgid ""
"Get Nova Credentials. See <xref "
"linkend=\"sdk_compute_get_nova_credentials_v2\"/>."
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml51(para)
#: ./doc/user-guide/section_sdk_nova.xml94(para)
#: ./doc/user-guide/section_sdk_nova.xml175(para)
#: ./doc/user-guide/section_sdk_neutron.xml268(para)
msgid ""
"Instantiate the <literal>nova_client</literal> client object by using the "
"<literal>credentials</literal> dictionary object:"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml59(para)
msgid ""
"Get the list of servers by calling <literal>servers.list</literal> on "
"<literal>nova_client</literal> object:"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml65(title)
msgid "List servers: complete code listing"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml78(title)
msgid "Create a server v2"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml79(para)
msgid "The following program creates a server (VM) using the v2 APIs:"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml81(title)
msgid "To create a server"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml102(para)
msgid ""
"In this step, search for the flavor and image to be used for creating a "
"server. The following code assumes <literal> cirros</literal> image and "
"<literal>m1.tiny</literal> are being used."
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml114(para)
msgid ""
"In this step determine the network with which the server is going to be "
"attached. Use this along with flavor and image to create the server."
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml123(para)
msgid ""
"Sleep for 5 secs and check if the server/vm got created by calling "
"<literal>nova_client.servers.list()</literal>"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml133(title)
msgid "Create server: complete code listing"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml159(title)
msgid "Delete server v2"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml160(para)
msgid "The following program deletes a Server (VM) using the v2 API:"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml162(title)
msgid "To Delete a Server"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml183(para)
msgid ""
"Check if the server <literal>\"vm1\"</literal> exists using the following "
"steps"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml185(para)
msgid "Get the list of servers: <literal>servers_list</literal>"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml186(para)
msgid ""
"Iterate over the <literal>servers_list</literal> and compare name with "
"<literal>\"vm1\" </literal>"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml188(para)
msgid ""
"If true set the variable name <literal>server_exists</literal> as "
"<literal>True</literal> and break from the for loop"
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml203(para)
msgid ""
"If the server exists execute <literal>delete</literal> method of "
"<literal>nova_client.servers</literal> object."
msgstr ""
#: ./doc/user-guide/section_sdk_nova.xml210(title)
msgid "Delete: complete code listing"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml8(title)
msgid "Measure cloud resources"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml9(para)
msgid "Telemetry measures cloud resources in OpenStack."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml11(para)
msgid ""
"It collects information about how much, who, what, and when with regards to "
"billing. Currently, metering is available through only the <placeholder-1/> "
"command-line client."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml15(para)
msgid "To model data, Telemetry uses these abstractions:"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml19(emphasis)
msgid "Meter"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml21(para)
msgid ""
"Measures a specific aspect of resource usage, such as the existence of a "
"running instance, or ongoing performance, such as the CPU utilization for an"
" instance. Meters exist for each type of resource. For example, a separate "
"<literal>cpu_util</literal> meter exists for each instance. The life cycle "
"of a meter is decoupled from the existence of its related resource. The "
"meter persists after the resource goes away."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml31(para)
msgid "A meter has the following attributes:"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml34(para)
msgid "String name."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml37(para)
msgid "A unit of measurement."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml40(para)
msgid ""
"A type. Indicates whether values increase monotonically (cumulative), are "
"interpreted as a change from the previous value (delta), or are standalone "
"and relate only to the current duration (gauge)."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml51(emphasis)
msgid "Sample"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml53(para)
msgid ""
"An individual data point that is associated with a specific meter. Has the "
"same attributes as the meter, with the addition of timestamp and value "
"attributes. The value attribute is also known as the sample <emphasis "
"role=\"italic\">volume</emphasis>."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml62(emphasis)
msgid "Statistic"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml64(para)
msgid ""
"A set of data point aggregates over a time duration. (In contrast, a sample "
"represents a single data point.) The Telemetry service employs these "
"aggregation functions:"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml70(para)
msgid ""
"<emphasis role=\"bold\">count</emphasis>. The number of samples in each "
"period."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml75(para)
msgid ""
"<emphasis role=\"bold\">max</emphasis>. The maximum number of sample volumes"
" in each period."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml80(para)
msgid ""
"<emphasis role=\"bold\">min</emphasis>. The minimum number of sample volumes"
" in each period."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml85(para)
msgid ""
"<emphasis role=\"bold\">avg</emphasis>. The average of sample volumes over "
"each period."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml90(para)
msgid ""
"<emphasis role=\"bold\">sum</emphasis>. The sum of sample volumes over each "
"period."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml98(emphasis)
msgid "Alarm"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml100(para)
msgid ""
"A set of rules that define a monitor and a current state, with edge-"
"triggered actions associated with target states. Provides user-oriented "
"Monitoring-as-a-Service and a general purpose utility for OpenStack. "
"Orchestration auto scaling is a typical use-case. Alarms follow a tristate "
"model of <literal>ok</literal>, <literal>alarm</literal>, and "
"<literal>insufficient data</literal>. For conventional threshold-oriented "
"alarms, a static threshold value and comparison operator govern state "
"transitions. The comparison operator compares a selected meter statistic "
"against an evaluation window of configurable length into the recent past."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml119(para)
msgid ""
"This example uses the <placeholder-1/> client to create an auto-scaling "
"stack and the <placeholder-2/> client to measure resources."
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml125(para)
msgid "Create an auto-scaling stack:"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml129(para)
msgid "List the heat resources that were created:"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml146(para)
msgid "List the alarms that are set:"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml156(para)
msgid "List the meters that are set:"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml167(para)
msgid "List samples:"
msgstr ""
#: ./doc/user-guide/section_cli_ceilometer.xml176(para)
msgid "View statistics:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml6(title)
msgid "Manage IP addresses"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml7(para)
msgid ""
"Each instance can have a private, or fixed, IP address and a public, or "
"floating, one."
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml9(para)
msgid ""
"Private IP addresses are used for communication between instances, and "
"public ones are used for communication with networks outside the cloud, "
"including the Internet."
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml12(para)
msgid ""
"When you launch an instance, it is automatically assigned a private IP "
"address that stays the same until you explicitly terminate the instance. "
"Rebooting an instance has no effect on the private IP address."
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml16(para)
msgid ""
"A pool of floating IP addresses, configured by the cloud operator, is "
"available in OpenStack Compute. You can allocate a certain number of these "
"IP addresses to a project. The maximum number of floating IP addresses per "
"project is defined by the quota."
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml20(para)
msgid ""
"After you allocate floating IP addresses to a project, you can add a "
"floating IP address from this set to an instance of the project. You can "
"assign a floating IP address to one instance at a time. Floating IP "
"addresses can be disassociated from an instance and associated with another "
"instance of the same project at any time."
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml26(title)
msgid "List floating IP address information"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml29(para)
msgid "To list all floating IP addresses, run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml58(para)
msgid ""
"To list all pools that provide floating IP addresses, run the following "
"command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml71(title)
msgid "Assign floating IP addresses"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml72(para)
msgid "You can assign floating IP addresses to a project and to an instance."
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml76(para)
msgid ""
"Run the following command to allocate a floating IP address to the current "
"project. If more than one IP address pool is available, you can specify the "
"pool from which to allocate the IP address. This example specifies the "
"<literal>public</literal> pool:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml89(para)
msgid ""
"After at least one floating IP address is allocated to the project, assign "
"an IP address to an instance in the project, as follows:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml92(replaceable)
#: ./doc/user-guide/section_cli_nova_floating_ips.xml102(replaceable)
msgid "INSTANCE_NAME_OR_ID"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml92(replaceable)
#: ./doc/user-guide/section_cli_nova_floating_ips.xml102(replaceable)
#: ./doc/user-guide/section_cli_nova_floating_ips.xml107(replaceable)
msgid "FLOATING_IP"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml93(para)
msgid ""
"After you assign the IP address and configure security group rules for the "
"instance, the instance is publicly available at the floating IP address."
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml99(para)
msgid ""
"To remove a floating IP address from an instance, specify the same arguments"
" that you used to assign the IP address, but run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml105(para)
msgid ""
"To release a floating IP address from the current project, run the following"
" command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_floating_ips.xml108(para)
msgid ""
"The IP address is returned to the pool of IP addresses that are available "
"for all projects. If an IP address is assigned to a running instance, it is "
"disassociated from the instance."
msgstr ""
#: ./doc/user-guide/section_sdk_auth_glance.xml6(title)
msgid "Authenticate against an Image Service endpoint"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_glance.xml7(para)
msgid ""
"To authenticate against an Image Service endpoint, instantiate a <link "
"href=\"http://docs.openstack.org/developer/python-"
"glanceclient/api/glanceclient.v2.client.html#glanceclient.v2.client.Client\">"
" glanceclient.v2.client.Client</link> object:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml6(title)
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml206(guilabel)
msgid "Networking"
msgstr "ਨੈੱਟਵਰਕਿੰਗ"
#: ./doc/user-guide/section_sdk_neutron.xml8(para)
msgid ""
"To use the information in this section, you should have a general "
"understanding of OpenStack Networking, OpenStack Compute, and the "
"integration between the two. You should also have access to a plug-in that "
"implements the Networking API v2.0."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml15(para)
msgid "Make sure that you set the relevant environment variables."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml17(para)
msgid ""
"As an example, see the sample shell file that sets these variables to get "
"credentials:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml20(replaceable)
msgid "password"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml22(replaceable)
msgid "IPADDRESS"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml25(title)
msgid "Get credentials"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml26(para)
msgid ""
"The examples in this section use the <code>get_credentials</code> method:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml38(para)
msgid ""
"Use the <code>get_credentials()</code> method to populate and get a "
"dictionary:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml43(title)
msgid "Get nova credentials"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml44(para)
msgid ""
"Few examples in this section use the <code>get_nova_credentials</code> "
"method:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml56(para)
msgid ""
"Use the <code>get_nova_credentials()</code> method to populate and get a "
"dictionary:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml62(title)
msgid "Print values"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml63(para)
msgid ""
"The examples in this section use the <code>print_values</code> and "
"<code>print_values_server</code> methods:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml94(para)
msgid ""
"This code resides in the <filename>utils.py</filename> file, which all "
"samples import."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml98(title)
msgid "Create network"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml99(para)
msgid "The following program creates a network:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml127(title)
msgid "List networks"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml128(para)
msgid "The following program lists networks:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml141(para)
#: ./doc/user-guide/section_sdk_neutron.xml204(para)
#: ./doc/user-guide/section_sdk_neutron.xml438(para)
msgid ""
"For <code>print_values</code> see <xref "
"linkend=\"sdk_neutron_print_values\"/>."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml146(title)
msgid "Create ports"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml147(para)
msgid "The following program creates a port:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml180(para)
msgid ""
"For <code>get_nova_credentials</code> see <xref "
"linkend=\"sdk_neutron_get_nova_credentials\"/>."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml183(para)
#: ./doc/user-guide/section_sdk_neutron.xml201(para)
msgid ""
"For <code>get_credentials</code> see <xref "
"linkend=\"sdk_neutron_get_credentials\"/>."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml188(title)
msgid "List ports"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml189(para)
msgid "The following program lists ports:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml209(title)
msgid "List server ports"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml210(para)
msgid "The following program lists the ports for a server:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml248(title)
msgid "Create router and add port to subnet"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml249(para)
msgid ""
"This example queries OpenStack Networking to create a router and add a port "
"to a subnet."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml252(title)
msgid "To create a router and add a port to a subnet"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml263(para)
msgid ""
"Get Nova Credentials. See <xref "
"linkend=\"sdk_neutron_get_nova_credentials\"/>."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml275(para)
msgid "Create a router and add a port to the subnet:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml299(title)
msgid "Create router: complete code listing"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml334(title)
msgid "Delete a network"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml335(para)
msgid "This example queries OpenStack Networking to delete a network."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml338(title)
msgid "To delete a network"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml345(para)
#: ./doc/user-guide/section_sdk_neutron.xml422(para)
#: ./doc/user-guide/section_sdk_neutron.xml474(para)
#: ./doc/user-guide/section_sdk_neutron.xml525(para)
msgid "Get credentials. See <xref linkend=\"sdk_neutron_get_credentials\"/>."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml350(para)
#: ./doc/user-guide/section_sdk_neutron.xml427(para)
#: ./doc/user-guide/section_sdk_neutron.xml479(para)
#: ./doc/user-guide/section_sdk_neutron.xml530(para)
msgid ""
"Instantiate the <literal>neutron</literal> client object by using the "
"<literal>credentials</literal> dictionary object:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml357(para)
msgid "Delete the network:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml379(title)
msgid "Delete network: complete code listing"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml410(title)
msgid "List routers"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml411(para)
msgid "This example queries OpenStack Networking to list all routers."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml414(title)
msgid "To list routers"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml434(para)
msgid "List the routers"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml444(title)
msgid "List routers: complete code listing"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml462(title)
msgid "List security groups"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml463(para)
msgid "This example queries OpenStack Networking to list security groups."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml466(title)
msgid "To list security groups"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml486(para)
msgid "List Security groups"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml492(title)
msgid "List security groups: complete code listing"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml506(para)
msgid ""
"OpenStack Networking security groups are case-sensitive while the "
"<systemitem class=\"service\">nova-network</systemitem> security groups are "
"case-insensitive."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml513(title)
msgid "List subnets"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml514(para)
msgid "This example queries OpenStack Networking to list subnets."
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml517(title)
msgid "To list subnets"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml537(para)
msgid "List subnets:"
msgstr ""
#: ./doc/user-guide/section_sdk_neutron.xml543(title)
msgid "List subnets: complete code listing"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml12(title)
msgid "Launch and manage stacks"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml14(para)
msgid ""
"OpenStack Orchestration is a service that you can use to orchestrate "
"multiple composite cloud applications. This service supports use of both the"
" Amazon Web Services (AWS) CloudFormation template format through both a "
"Query API that is compatible with CloudFormation and the native OpenStack "
"<glossterm>Heat Orchestration Template (HOT)</glossterm> format through a "
"REST API."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml22(para)
msgid ""
"These flexible template languages enable application developers to describe "
"and automate the deployment of infrastructure, services, and applications. "
"The templates enable creation of most OpenStack resource types, such as "
"instances, floating IP addresses, volumes, security groups, and users. The "
"resources, once created, are referred to as stacks."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml36(title)
msgid "Launch a stack"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml39(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guibutton>Stacks</guibutton> in the <guilabel>Orchestration</guilabel> "
"category on the <guilabel>Projects</guilabel> tab."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml45(para)
msgid "Click <guibutton>Launch Stack</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml50(para)
msgid ""
"In the Select Template dialog box, choose the source of the template from "
"the list."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml54(para)
msgid ""
"Depending on the source that you selected, enter the URL, browse to the file"
" location, or directly include the template."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml59(para)
msgid "In the Launch Stack dialog box, specify the following values."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml66(guilabel)
msgid "Stack Name"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml68(para)
msgid "Enter a name to identify the stack."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml71(guilabel)
msgid "Creation Timeout (minutes)"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml73(para)
msgid ""
"Specify the number of minutes that can elapse before the launch of the stack"
" times out."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml77(guilabel)
msgid "Rollback On Failure"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml79(para)
msgid ""
"Select this check box if you want if you want the service to roll back "
"changes if the stack fails to launch."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml84(guilabel)
msgid "Password for user \"demo\""
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml86(para)
msgid ""
"Specify the password that the default user will use when the stack is "
"created."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml90(guilabel)
msgid "DBUsername"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml91(para)
msgid "Specify the name of the database user."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml94(guilabel)
msgid "LinuxDistribution"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml95(para)
msgid "Specify the Linux distribution that will be used in the stack."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml99(guilabel)
msgid "DBRootPassword"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml100(para)
msgid "Specify the root password for the database."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml103(guilabel)
msgid "KeyName"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml104(para)
msgid ""
"Specify the name of the key pair that will be used to log into the stack."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml108(guilabel)
msgid "DBName"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml109(para)
msgid "Specify the name of the database."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml112(guilabel)
msgid "DBPassword"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml113(para)
msgid "Specify the password for the database."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml116(guilabel)
msgid "InstanceType"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml117(para)
msgid "Specify the flavor for the instance."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml123(para)
msgid "Click <guilabel>Launch</guilabel> to create a stack."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml127(para)
msgid "The dashboard shows the stack on the <guilabel>Stacks</guilabel> tab."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml131(para)
msgid ""
"After the stack is created, click on the stack name to see the following "
"details:"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml135(guilabel)
msgid "Topology"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml137(para)
msgid "The topology of the stack."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml141(guilabel)
msgid "Overview"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml143(para)
msgid "The parameters and details of the stack."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml148(guilabel)
msgid "Resources"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml150(para)
msgid "The resources used by the stack."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml154(guilabel)
msgid "Events"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml156(para)
msgid "The events related to the stack."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml162(title)
msgid "Delete a stack"
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml163(para)
msgid "When you delete a stack, you cannot undo this action."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml167(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guilabel>Stacks</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml171(para)
msgid "Select the stack that you want to delete."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml174(para)
msgid "Click <guibutton>Delete Stack</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_stacks.xml178(para)
msgid ""
"In the confirmation dialog box, click <guibutton>Delete Stack</guibutton> to"
" confirm the deletion."
msgstr ""
#: ./doc/user-guide/section_sdk_authenticate.xml5(title)
msgid "Authenticate"
msgstr ""
#: ./doc/user-guide/section_sdk_authenticate.xml6(para)
msgid ""
"You must authenticate against an OpenStack endpoint before you can use "
"OpenStack services. Each project uses a slightly different syntax for "
"authentication."
msgstr ""
#: ./doc/user-guide/section_sdk_authenticate.xml9(para)
msgid ""
"You must typically authenticate against a specific version of a service. For"
" example, a client might need to authenticate against Identity v2.0."
msgstr ""
#: ./doc/user-guide/section_sdk_authenticate.xml12(para)
msgid ""
"Python scripts that use the OpenStack SDK must have access to the "
"credentials contained in the <link linkend=\"cli_openrc\">OpenStack RC "
"file</link>. Because credentials are sensitive information, do not include "
"them in your scripts. This guide assumes that users source the "
"<filename><replaceable>PROJECT</replaceable>-openrc.sh</filename> file and "
"access the credentials by using the environment variables in the Python "
"scripts."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml6(title)
msgid "Upload and manage images"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml7(para)
msgid ""
"A virtual machine image, referred to in this document simply as an image, is"
" a single file that contains a virtual disk that has a bootable operating "
"system installed on it. Images are used to create virtual machine instances "
"within the cloud. For information about creating image files, see the <link "
"href=\"http://docs.openstack.org/image-guide/content/\"><citetitle>OpenStack"
" Virtual Machine Image Guide</citetitle></link>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml15(para)
msgid ""
"Depending on your role, you may have permission to upload and manage virtual"
" machine images. Operators might restrict the upload and management of "
"images to cloud administrators or operators only. If you have the "
"appropriate privileges, you can use the dashboard to upload and manage "
"images in the <guilabel>admin</guilabel> project."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml22(para)
msgid ""
"You can also use the <placeholder-1/> and <placeholder-2/> command-line "
"clients or the Image Service and Compute APIs to manage images. See <xref "
"linkend=\"cli_manage_images\"/>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml29(para)
msgid "Follow this procedure to upload an image to a project."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml33(para)
#: ./doc/user-guide/section_dashboard_manage_images.xml159(para)
#: ./doc/user-guide/section_dashboard_manage_images.xml206(para)
msgid "Log in to the dashboard."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml36(para)
#: ./doc/user-guide/section_dashboard_manage_images.xml162(para)
#: ./doc/user-guide/section_dashboard_manage_images.xml209(para)
msgid ""
"From the <guilabel>CURRENT PROJECT</guilabel> on the "
"<guilabel>Project</guilabel> tab, select the appropriate project."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml41(para)
#: ./doc/user-guide/section_dashboard_manage_images.xml167(para)
#: ./doc/user-guide/section_dashboard_manage_images.xml213(para)
msgid ""
"On the <guilabel>Project</guilabel> tab, click <guilabel>Images</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml45(para)
#: ./doc/user-guide/section_dashboard_manage_images.xml148(para)
msgid "Click <guibutton>Create Image</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml46(para)
msgid "The Create An Image dialog box appears."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml49(para)
msgid "Enter the following values:"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml56(guilabel)
msgid "Name"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml59(para)
msgid "Enter a name for the image."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml67(para)
msgid "Optionally, enter a brief description of the image."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml73(guilabel)
msgid "Image Source"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml76(para)
msgid ""
"Choose the image source from the list. Your choices are <guilabel>Image "
"Location</guilabel> and <guilabel>Image File</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml83(para)
msgid "<guilabel>Image File</guilabel> or <guilabel>Image Location</guilabel>"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml88(para)
msgid ""
"Based on your selection for <guilabel>Image Source</guilabel>, you either "
"enter the location URL of the image in the <guilabel>Image "
"Location</guilabel> field. or browse to the image file on your system and "
"add it."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml97(guilabel)
msgid "Format"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml100(para)
msgid "Select the correct format (for example, QCOW2) for the image."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml107(guilabel)
msgid "Architecture"
msgstr "ਢਾਂਚਾ"
#: ./doc/user-guide/section_dashboard_manage_images.xml111(para)
msgid ""
"Specify the architecture. For example, <literal>i386</literal> for a 32-bit "
"architecture or <literal>x86-64</literal> for a 64-bit architecture."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml118(para)
msgid ""
"<guilabel>Minimum Disk (GB)</guilabel> and <guilabel>Minimum RAM "
"(MB)</guilabel>"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml122(para)
msgid "Leave these optional fields empty."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml127(guilabel)
msgid "Public"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml130(para)
msgid ""
"Select this check box to make the image public to all users with access to "
"the current project."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml137(guilabel)
msgid "Protected"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml140(para)
msgid ""
"Select this check box to ensure that only users with permissions can delete "
"the image."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml149(para)
msgid ""
"The image is queued to be uploaded. It might take some time before the "
"status changes from Queued to Active."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml155(title)
msgid "Update an image"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml156(para)
msgid "Follow this procedure to update an existing image."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml171(para)
msgid "Select the image that you want to edit."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml174(para)
msgid ""
"In the <guilabel>Actions</guilabel> column, click <guilabel>More</guilabel> "
"and then select <guilabel>Edit</guilabel> from the list."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml182(para)
msgid "Change the name of the image."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml185(para)
msgid ""
"Select the <guilabel>Public</guilabel> check box to make the image public."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml189(para)
msgid ""
"Clear the <guilabel>Public</guilabel> check box to make the image private."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml179(para)
msgid ""
"In the Update Image dialog box, you can perform the following actions: "
"<placeholder-1/>"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml195(para)
msgid "Click <guibutton>Update Image</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml200(title)
msgid "Delete an image"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml201(para)
msgid ""
"Deletion of images is permanent and <emphasis "
"role=\"bold\">cannot</emphasis> be reversed. Only users with the appropriate"
" permissions can delete images."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml217(para)
msgid "Select the images that you want to delete."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml220(para)
msgid "Click <guibutton>Delete Images</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_images.xml223(para)
msgid ""
"In the <guilabel>Confirm Delete Image</guilabel> dialog box, click "
"<guibutton>Delete Images</guibutton> to confirm the deletion."
msgstr ""
#: ./doc/user-guide/ch_cli.xml10(title)
msgid "OpenStack command-line clients"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_nova.xml6(title)
msgid "Authenticate against a Compute endpoint"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_nova.xml7(para)
msgid ""
"To authenticate against a Compute endpoint, instantiate a <link "
"href=\"http://docs.openstack.org/developer/python-"
"novaclient/api/novaclient.v1_1.client.html#novaclient.v1_1.client.Client\"> "
"novaclient.v_1_1.client.Client</link> object:"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_nova.xml18(para)
msgid ""
"Alternatively, you can instantiate a "
"<classname>novaclient.client.Client</classname> object and pass the version "
"number:"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_nova.xml28(para)
msgid ""
"If you authenticate against an endpoint that uses a custom authentication "
"back-end, you must load the authentication plug-in and pass it to the "
"constructor."
msgstr ""
#: ./doc/user-guide/section_sdk_auth_nova.xml31(para)
msgid ""
"The Rackspace public cloud is an OpenStack deployment that uses a custom "
"authentication back end. To authenticate against this cloud, you must "
"install the <link href=\"https://pypi.python.org/pypi/rackspace-"
"novaclient/\"> rackspace-novaclient</link> library that contains the "
"Rackspace authentication plug-in, called <literal>rackspace</literal>. The "
"following Python code shows the additional modifications required to "
"instantiate a <classname>Client</classname> object that can authenticate "
"against the Rackspace custom authentication back end."
msgstr ""
#: ./doc/user-guide/section_sdk_auth_nova.xml53(para)
msgid ""
"If you set the <literal>OS_AUTH_SYSTEM</literal> environment variable, check"
" for this variable in your Python script to determine whether you need to "
"load a custom authentication back end:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml9(title)
msgid "Add a keypair"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml10(para)
msgid ""
"To generate a keypair, call the <methodname><link "
"href=\"http://docs.openstack.org/developer/python-"
"novaclient/api/novaclient.v1_1.keypairs.html#novaclient.v1_1.keypairs.KeypairManager.create\">novaclient.v1_1.keypairs.KeypairManager.create</link></methodname>"
" method:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml20(para)
msgid "The Python script output looks something like this:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml28(para)
msgid ""
"You typically write the private key to a file to use it later. The file must"
" be readable and writeable by only the file owner, otherwise the ssh client "
"will refuse to read the private key file. It is safest to create the file "
"with the appropriate permissions, as shown in the following example:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml46(title)
msgid "Import a keypair"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml47(para)
msgid ""
"If you have already generated a keypair with the public key located at "
"<filename>~/.ssh/id_rsa.pub</filename>, pass the contents of the file to the"
" <methodname><link href=\"http://docs.openstack.org/developer/python-"
"novaclient/api/novaclient.v1_1.keypairs.html#novaclient.v1_1.keypairs.KeypairManager.create\">"
" novaclient.v1_1.keypairs.KeypairManager.create</link></methodname> method "
"to import the public key to Compute:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml61(title)
msgid "List keypairs"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml62(para)
msgid ""
"To list keypairs, call the <methodname><link "
"href=\"http://docs.openstack.org/developer/python-"
"novaclient/api/novaclient.v1_1.keypairs.html#novaclient.v1_1.keypairs.KeypairManager.list\">novaclient.v1_1.keypairs.KeypairManager.list</link></methodname>"
" method:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml70(title)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml120(title)
msgid "Create and manage security groups"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml71(para)
msgid ""
"To list security groups for the current project, call the <methodname><link "
"href=\"http://docs.openstack.org/developer/python-"
"novaclient/api/novaclient.v1_1.security_groups.html#novaclient.v1_1.security_groups.SecurityGroupManager.list\">novaclient.v_1.security_groups.SecurityGroupManager.list</link></methodname>"
" method:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml76(para)
msgid ""
"To create a security group with a specified name and description, call the "
"<methodname><link href=\"http://docs.openstack.org/developer/python-"
"novaclient/api/novaclient.v1_1.security_groups.html#novaclient.v1_1.security_groups.SecurityGroupManager.create\">novaclient.v_1.security_groups.SecurityGroupManager.create</link></methodname>"
" method:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml81(para)
msgid ""
"To delete a security group, call the <methodname><link "
"href=\"http://docs.openstack.org/developer/python-"
"novaclient/api/novaclient.v1_1.security_groups.html#novaclient.v1_1.security_groups.SecurityGroupManager.delete\">"
" "
"novaclient.v_1.security_groups.SecurityGroupManager.delete</link></methodname>"
" method, passing either a <link href=\"http://docs.openstack.org/developer"
"/python-"
"novaclient/api/novaclient.v1_1.security_groups.html#novaclient.v1_1.security_groups.SecurityGroup\">novaclient.v1_1.security_groups.SecurityGroup</link>"
" object or group ID as an argument:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml95(title)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml147(title)
msgid "Create and manage security group rules"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml96(para)
msgid ""
"Access the security group rules from the <literal>rules</literal> attribute "
"of a <link href=\"http://docs.openstack.org/developer/python-"
"novaclient/api/novaclient.v1_1.security_groups.html#novaclient.v1_1.security_groups.SecurityGroup\">novaclient.v1_1.security_groups.SecurityGroup</link>"
" object:"
msgstr ""
#: ./doc/user-guide/section_sdk_configure_instances.xml102(para)
msgid ""
"To add a rule, to a security group, call the <methodname><link "
"href=\"http://docs.openstack.org/developer/python-"
"novaclient/api/novaclient.v1_1.security_group_rules.html#novaclient.v1_1.security_group_rules.SecurityGroupRuleManager.create\">novaclient.v1_1.security_group_rules.SecurityGroupRuleManager.create</link></methodname>"
" method:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_manage_instances.xml6(title)
msgid "Manage instances and hosts"
msgstr ""
#: ./doc/user-guide/section_cli_nova_manage_instances.xml7(para)
msgid ""
"Instances are virtual machines that run inside the cloud on physical compute"
" nodes. The Compute service manages instances. A host is the node on which a"
" group of instances resides."
msgstr ""
#: ./doc/user-guide/section_cli_nova_manage_instances.xml11(para)
msgid ""
"This section describes how to perform the different tasks involved in "
"instance management, such as adding floating IP addresses, stopping and "
"starting instances, and terminating instances. This section also discusses "
"node management tasks."
msgstr ""
#: ./doc/user-guide/section_sdk_auth_keystone.xml6(title)
msgid "Authenticate against an Identity endpoint"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_keystone.xml7(para)
msgid ""
"To authenticate against the Identity v2.0 endpoint, instantiate a <link "
"href=\"http://docs.openstack.org/developer/python-"
"keystoneclient/api/keystoneclient.v2_0.client.html#keystoneclient.v2_0.client.Client\">"
" keystoneclient.v_20.client.Client</link> object:"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_keystone.xml18(para)
msgid ""
"After you instantiate a <classname>Client</classname> object, you can "
"retrieve the token by accessing its <literal>auth_token</literal> attribute "
"object:"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_keystone.xml24(para)
msgid ""
"If the OpenStack cloud is configured to use public-key infrastructure (PKI) "
"tokens, the Python script output looks something like this:"
msgstr ""
#: ./doc/user-guide/section_sdk_auth_keystone.xml35(para)
msgid ""
"This example shows a subset of a PKI token. A complete token is over 5000 "
"characters long."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml12(title)
msgid "Launch and manage instances"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml13(para)
msgid "Instances are virtual machines that run inside the cloud."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml15(para)
msgid ""
"You can <link linkend=\"dashboard_launch_instances_from_image\">launch an "
"instance</link> from the following sources:"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml18(para)
msgid ""
"Images uploaded to the OpenStack Image Service, as described in <xref "
"linkend=\"dashboard_manage_images\"/>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml20(para)
msgid ""
"Image that you have copied to a persistent volume. The instance launches "
"from the volume, which is provided by the <systemitem class=\"service"
"\">cinder-volume</systemitem> API through iSCSI."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml29(title)
msgid "Connect to your instance by using SSH"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml30(para)
msgid ""
"To use SSH to connect to your instance, you use the downloaded keypair file."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml33(para)
msgid ""
"The user name is <literal>ubuntu</literal> for the Ubuntu cloud images on "
"TryStack."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml38(para)
msgid "Copy the IP address for your instance."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml41(para)
msgid ""
"Use the <placeholder-1/> command to make a secure connection to the "
"instance. For example:"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml47(para)
msgid "At the prompt, type <literal>yes</literal>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml53(title)
msgid "Track usage for instances"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml54(para)
msgid ""
"You can track usage for instances for each project. You can track costs per "
"month by showing metrics like number of vCPUs, disks, RAM, and uptime for "
"all your instances."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml60(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guilabel>Overview</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml64(para)
msgid ""
"To query the instance usage for a month, select a month and click "
"<guibutton>Submit</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml69(para)
msgid ""
"To download a summary, click <guibutton>Download CSV Summary</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml75(title)
msgid "Create an instance snapshot"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml78(para)
#: ./doc/user-guide/section_dashboard_launch_instances.xml110(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guilabel>Instances</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml82(para)
msgid "Select the instance from which to create a snapshot."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml85(para)
msgid ""
"From the <guilabel>Actions</guilabel> list, select <guilabel>Create "
"Snapshot</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml90(para)
msgid ""
"In the Create Snapshot dialog box, enter a name for the snapshot, and then "
"click <guibutton>Create Snapshot</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml93(para)
msgid ""
"The <guilabel>Images &amp; Snapshots</guilabel> category shows the instance "
"snapshot."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml98(para)
msgid ""
"To launch an instance from the snapshot, select the snapshot and click "
"<guibutton>Launch</guibutton>. Proceed with <xref "
"linkend=\"dashboard_launch_instances_from_image\"/>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml107(title)
msgid "Manage an instance"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml114(para)
msgid "Select an instance."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml117(para)
msgid ""
"In the <guilabel>More</guilabel> list in the <guilabel>Actions</guilabel> "
"column, select the state."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances.xml120(para)
msgid ""
"You can resize or rebuild an instance. You can also choose to view the "
"instance console log. Depending on the current state of the instance, you "
"can pause, resume, suspend, soft or hard reboot, or terminate it."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml12(title)
msgid "Launch an instance"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml14(para)
msgid ""
"When you launch an instance from an image, OpenStack creates a local copy of"
" the image on the compute node where the instance starts."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml16(para)
msgid "When you launch an instance from a volume, note the following steps:"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml20(para)
msgid ""
"To select the volume to from which to launch, launch an instance from an "
"arbitrary image on the volume. The image that you select does not boot. "
"Instead, it is replaced by the image on the volume that you choose in the "
"next steps."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml24(para)
msgid ""
"To boot a Xen image from a volume, the image you launch in must be the same "
"type, fully virtualized or paravirtualized, as the one on the volume."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml29(para)
msgid ""
"Select the volume or volume snapshot from which to boot. Enter a device "
"name. Enter <literal>vda</literal> for KVM images or <literal>xvda</literal>"
" for Xen images."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml36(para)
msgid ""
"Log in to the dashboard, choose a project, and click <guilabel>Images &amp; "
"Snapshot</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml38(para)
msgid ""
"The dashboard shows the images that have been uploaded to OpenStack Image "
"Service and are available for this project."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml41(para)
msgid ""
"For details on creating images, see <link href=\"http://docs.openstack.org"
"/image-guide/content/ch_creating_images_manually.html\">Creating images "
"manually</link> in the <citetitle>OpenStack Virtual Machine Image "
"Guide</citetitle>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml47(para)
msgid "Select an image and click <guibutton>Launch</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml51(para)
msgid "In the Launch Instance dialog box, specify the following values:"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml59(guilabel)
msgid "Details"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml64(guilabel)
msgid "Availability Zone"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml67(para)
msgid ""
"By default, this value is set to the availability zone given by the cloud "
"provider (for example, <literal>us-west</literal> or <literal>apac-"
"south</literal>). For most cases, it could be <literal>nova</literal>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml76(guilabel)
msgid "Instance Name"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml77(para)
msgid "Assign a name to the virtual machine."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml79(para)
msgid ""
"The name you assign here becomes the initial host name of the server. After "
"the server is built, if you change the server name in the API or change the "
"host name directly, the names are not updated in the dashboard."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml85(para)
msgid ""
"Server names are not guaranteed to be unique when created so you could have "
"two instances with the same host name."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml93(guilabel)
msgid "Flavor"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml94(para)
msgid "Specify the size of the instance to launch."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml98(guilabel)
msgid "Instance Count"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml100(para)
msgid ""
"To launch multiple instances, enter a value greater than 1. The default is "
"1."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml106(guilabel)
msgid "Instance Boot Source"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml109(para)
msgid "Your options are:"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml112(para)
msgid ""
"<guilabel>Boot from image</guilabel>—If you choose this option, a new field "
"for <guilabel>Image Name</guilabel> displays. You can select the image from "
"the list."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml121(para)
msgid ""
"<guilabel>Boot from snapshot</guilabel>—If you choose this option, a new "
"field for <guilabel>Instance Snapshot</guilabel> displays. You can select "
"the snapshot from the list."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml130(para)
msgid ""
"<guilabel>Boot from volume</guilabel>—If you choose this option, a new field"
" for <guilabel>Volume</guilabel> displays. You can select the volume from "
"the list."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml139(para)
msgid ""
"<guilabel>Boot from image (creates a new volume) </guilabel>—With this "
"option, you can boot from an image and create a volume by entering the "
"<guilabel>Device Size</guilabel> and <guilabel>Device Name</guilabel> for "
"your volume."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml149(para)
msgid ""
"<guilabel>Boot from volume snapshot (creates a new volume)</guilabel>— Using"
" this option, you can boot from a volume snapshot and create a new volume by"
" choosing <guilabel>Volume Snapshot</guilabel> from a list and adding a "
"<guilabel>Device Name</guilabel> for your volume."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml160(para)
msgid ""
"Since you are launching an instance from an image, <guilabel>Boot from "
"image</guilabel> is chosen by default."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml168(guilabel)
msgid "Image Name"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml172(para)
msgid ""
"This field changes based on your previous selection. Since you have chosen "
"to launch an instance using an image, the <guilabel>Image Name</guilabel> "
"field displays. Select the image name from the dropdown list."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml180(guilabel)
msgid "Access &amp; Security"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml184(guilabel)
msgid "Keypair"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml185(para)
msgid "Specify a key pair."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml186(para)
msgid ""
"If the image uses a static root password or a static key set (neither is "
"recommended), you do not need to provide a key pair to launch the instance."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml192(guilabel)
msgid "Security Groups"
msgstr "ਸੁਰੱਖਿਆ ਸਮੂਹ"
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml194(para)
msgid "Activate the security groups that you want to assign to the instance."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml196(para)
msgid ""
"Security groups are a kind of cloud firewall that define which incoming "
"network traffic is forwarded to instances. For details, see <xref "
"linkend=\"security_groups_add_rule\"/>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml200(para)
msgid ""
"If you have not created any security groups, you can assign only the default"
" security group to the instance."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml209(guilabel)
msgid "Selected Networks"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml211(para)
msgid ""
"To add a network to the instance, click the <guibutton>+</guibutton> in the "
"<guilabel>Available Networks</guilabel> field."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml218(guilabel)
msgid "Post-Creation"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml221(guilabel)
msgid "Customization Script"
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml223(para)
msgid "Specify a customization script that runs after your instance launches."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml230(para)
msgid "Click <guibutton>Launch</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml231(para)
msgid "The instance starts on a compute node in the cloud."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml234(para)
msgid ""
"The <guilabel>Instances</guilabel> tab shows the instance's name, its "
"private and public IP addresses, size, status, task, and power state."
msgstr ""
#: ./doc/user-guide/section_dashboard_launch_instances_from_image.xml237(para)
msgid ""
"If you did not provide a key pair, security groups, or rules, users can "
"access the instance only from inside the cloud through VNC. Even pinging the"
" instance is not possible without an ICMP rule configured. To access the "
"instance through a VNC console, see <xref linkend=\"instance_console\"/>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml6(title)
msgid "Create and manage object containers"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml8(para)
msgid ""
"OpenStack Object Storage provides a distributed, API-accessible storage "
"platform that can be integrated directly into an application or used to "
"store any type of file, including VM images, backups, archives, or media "
"files. In the OpenStack Dashboard, you can only manage containers and "
"objects."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml13(para)
msgid ""
"In OpenStack Object Storage, containers provide storage for objects in a "
"manner similar to a Windows folder or Linux file directory, though they "
"cannot be nested. An object in OpenStack consists of the file to be stored "
"in the container and any accompanying metadata."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml19(title)
msgid "Create a container"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml22(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guilabel>Containers</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml26(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml34(para)
msgid "Click <guibutton>Create Container</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml29(para)
msgid ""
"In the <guilabel>Create Container</guilabel> dialog box, enter a name for "
"the container, choose if you want the access to be "
"<guilabel>Private</guilabel> or <guilabel>Public</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml37(para)
msgid "You have successfully created a container."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml38(para)
msgid ""
"To delete a container, click the <guibutton>More</guibutton> button and "
"select <guilabel>Delete Container</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml44(title)
msgid "Upload an object"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml47(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml80(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml108(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml162(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml191(para)
msgid ""
"Log in to the dashboard, choose a project, and click "
"<guilabel>Containers</guilabel> in the <guilabel>Object Store</guilabel> "
"tab."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml52(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml85(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml113(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml167(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml196(para)
msgid "Select the container in which you want to store your object."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml55(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml70(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml170(para)
msgid "Click <guibutton>Upload Object</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml56(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml171(para)
msgid ""
"The <guilabel>Upload Object To Container: "
"<replaceable>&lt;name&gt;</replaceable></guilabel> dialog box is displayed. "
"<replaceable>&lt;name&gt;</replaceable> is the name of the container to "
"which you are uploading the object."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml63(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml182(para)
msgid "Enter a name for the object."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml66(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml94(para)
msgid "Browse to and select the file that you want to upload."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml71(para)
msgid "You have successfully uploaded an object to the container."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml76(title)
msgid "Manage an object"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml78(title)
msgid "Edit an object"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml88(para)
msgid ""
"Click <guibutton>More</guibutton> and choose <guilabel>Edit </guilabel> from"
" the dropdown list."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml90(para)
msgid "The <guilabel>Edit Object</guilabel> dialog box is displayed."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml98(para)
#: ./doc/user-guide/section_dashboard_manage_containers.xml185(para)
msgid "Click <guibutton>Update Object</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml102(para)
msgid ""
"To delete an object, click the <guibutton>More</guibutton> button and select"
" <guilabel>Delete Object</guilabel>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml106(title)
msgid "Copy an object from one container to another"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml116(para)
msgid ""
"Click <guibutton>More</guibutton> and choose <guilabel>Copy </guilabel> from"
" the dropdown list."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml120(para)
msgid ""
"In the <guilabel>Copy Object: launch</guilabel> dialog box, enter or select "
"the following values:"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml128(guilabel)
msgid "Destination Container"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml131(para)
msgid "Choose the destination container from the dropdown list."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml137(guilabel)
msgid "Path"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml140(para)
msgid ""
"Specify a path at which the new copy should be stored inside of the selected"
" container."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml146(guilabel)
msgid "Destination object name"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml149(para)
msgid "Enter a name for the object in the new container."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml156(para)
msgid "Click <guibutton>Copy Object</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml160(title)
msgid "Create a metadata only object without a file"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml176(para)
msgid ""
"You can create a new object in container without a file available and can "
"upload the file later when it is ready. This works like a place-holder for a"
" new object to allow user to flexibly share object metadata and URL info in "
"advance."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml189(title)
msgid "Create a pseudo-folder"
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml199(para)
msgid "Click <guibutton>Create Pseudo-folder</guibutton>."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml200(para)
msgid ""
"The <guilabel>Create pseudo-folder in container <replaceable>&lt;name&gt; "
"</replaceable></guilabel> dialog box is displayed. <replaceable>&lt;name&gt;"
" </replaceable> is the name of the container to which you are uploading the "
"object."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml206(para)
msgid "Enter a name for the pseudo-folder."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml207(para)
msgid ""
"Pseudo-folders behave similarly to folders in your desktop operating system,"
" with the exception that they are virtual collections defined by a common "
"prefix on the object's name."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml210(para)
msgid ""
"A slash (/) character is used as the delimiter for pseudo-folders in the "
"Object Store."
msgstr ""
#: ./doc/user-guide/section_dashboard_manage_containers.xml214(para)
msgid "Click <guibutton>Create</guibutton>."
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml12(title)
msgid "OpenStack End User Guide"
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml13(titleabbrev)
msgid "End User Guide"
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml21(orgname)
#: ./doc/user-guide/bk-user-guide.xml26(holder)
msgid "OpenStack Foundation"
msgstr "ਓਪਨ-ਸਟੈਕ ਫਾਊਂਡੇਸ਼ਨ"
#: ./doc/user-guide/bk-user-guide.xml25(year)
msgid "2014"
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml28(releaseinfo)
msgid "current"
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml29(productname)
msgid "OpenStack"
msgstr "ਓਪਨ-ਸਟੈਕ"
#: ./doc/user-guide/bk-user-guide.xml33(remark)
msgid "Copyright details are filled in by the template."
msgstr "ਨਕਲ-ਹੱਕ ਵੇਰਵੇ ਟੈਂਪਲੇਟ ਦੁਆਰਾ ਭਰੇ ਜਾਂਦੇ ਹਨ।"
#: ./doc/user-guide/bk-user-guide.xml38(para)
msgid ""
"OpenStack is an open-source cloud computing platform for public and private "
"clouds. A series of interrelated projects deliver a cloud infrastructure "
"solution. This guide shows OpenStack end users how to create and manage "
"resources in an OpenStack cloud with the OpenStack dashboard and OpenStack "
"client commands."
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml48(date)
msgid "2014-01-31"
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml52(para)
msgid ""
"Removed the command reference appendix. This information is now in the <link"
" href=\"http://docs.openstack.org/cli-"
"reference/content/\"><citetitle>OpenStack Command-Line Interface "
"Reference</citetitle></link>."
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml62(date)
msgid "2013-12-30"
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml66(para)
msgid "Added the OpenStack Python SDK chapter."
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml73(date)
msgid "2013-10-17"
msgstr "੨੦੧੩-੧੦-੧੭"
#: ./doc/user-guide/bk-user-guide.xml77(para)
msgid "Havana release."
msgstr "ਹਵਾਨਾ ਰਿਲੀਜ਼"
#: ./doc/user-guide/bk-user-guide.xml83(date)
msgid "2013-08-19"
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml87(para)
msgid "Editorial changes."
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml93(date)
msgid "2013-07-29"
msgstr ""
#: ./doc/user-guide/bk-user-guide.xml97(para)
msgid "First edition of this document."
msgstr ""
#: ./doc/user-guide/ch_dashboard.xml10(title)
msgid "OpenStack dashboard"
msgstr ""
#: ./doc/user-guide/ch_dashboard.xml12(para)
msgid ""
"As a cloud end user, you can use the OpenStack dashboard to provision your "
"own resources within the limits set by administrators. You can modify the "
"examples provided in this section to create other types and sizes of server "
"instances."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml19(para)
msgid ""
"When you launch a virtual machine, you can inject a <emphasis "
"role=\"italic\">key pair</emphasis>, which provides SSH access to your "
"instance. For this to work, the image must contain the <literal>cloud-"
"init</literal> package."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml23(para)
msgid ""
"You create at least one key pair for each project. You can use the key pair "
"for multiple instances that belong to that project. If you generate a key "
"pair with an external tool, you can import it into OpenStack."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml26(para)
msgid ""
"If an image uses a static root password or a static key set – neither is "
"recommended – you must not provide a key pair when you launch the instance."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml29(para)
msgid ""
"A <emphasis role=\"italic\">security group</emphasis> is a named collection "
"of network access rules that you use to limit the types of traffic that have"
" access to instances. When you launch an instance, you can assign one or "
"more security groups to it. If you do not create security groups, new "
"instances are automatically assigned to the default security group, unless "
"you explicitly specify a different security group."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml36(para)
msgid ""
"The associated <emphasis role=\"italic\">rules</emphasis> in each security "
"group control the traffic to instances in the group. Any incoming traffic "
"that is not matched by a rule is denied access by default. You can add rules"
" to or remove rules from a security group, and you can modify rules for the "
"default and any other security group."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml42(para)
msgid ""
"You can modify the rules in a security group to allow access to instances "
"through different ports and protocols. For example, you can modify rules to "
"allow access to instances through SSH, to ping instances, or to allow UDP "
"traffic; for example, for a DNS server running on an instance. You specify "
"the following parameters for rules:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml50(para)
msgid ""
"<emphasis role=\"bold\">Source of traffic</emphasis>. Enable traffic to "
"instances from either IP addresses inside the cloud from other group members"
" or from all IP addresses."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml56(para)
msgid ""
"<emphasis role=\"bold\">Protocol</emphasis>. Choose TCP for SSH, ICMP for "
"pings, or UDP."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml60(para)
msgid ""
"<emphasis role=\"bold\">Destination port on virtual machine</emphasis>. "
"Define a port range. To open a single port only, enter the same value twice."
" ICMP does not support ports; instead, you enter values to define the codes "
"and types of ICMP traffic to be allowed."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml67(para)
msgid "Rules are automatically enforced as soon as you create or modify them."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml70(para)
msgid ""
"Instances that use the default security group cannot, by default, be "
"accessed from any IP address outside of the cloud. If you want those IP "
"addresses to access the instances, you must modify the rules for the default"
" security group."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml74(para)
msgid ""
"You can also assign a floating IP address to a running instance to make it "
"accessible from outside the cloud. See <xref "
"linkend=\"manage_ip_addresses\"/>."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml81(para)
msgid "You can generate a key pair or upload an existing public key."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml84(para)
msgid "To generate a key pair, run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml85(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml107(replaceable)
msgid "KEY_NAME"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml85(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml96(replaceable)
msgid "MY_KEY"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml86(para)
msgid ""
"The command generates a key pair with the name that you specify fir "
"<replaceable>KEY_NAME</replaceable>, writes the private key to the "
"<filename>.pem</filename> file that you specify, and registers the public "
"key at the Nova database."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml93(para)
msgid ""
"To set the permissions of the <filename>.pem</filename> file so that only "
"you can read and write to it, run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml104(para)
msgid ""
"If you have already generated a key pair and the public key is located at "
"<filename>~/.ssh/id_rsa.pub</filename>, run the following command to upload "
"the public key:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml108(para)
msgid ""
"The command registers the public key at the Nova database and names the key "
"pair the name that you specify for "
"<literal><replaceable>KEY_NAME</replaceable></literal>."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml113(para)
msgid ""
"To ensure that the key pair has been successfully imported, list key pairs "
"as follows:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml123(para)
msgid ""
"To list the security groups for the current project, including descriptions,"
" enter the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml128(para)
msgid ""
"To create a security group with a specified name and description, enter the "
"following command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml131(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml136(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml156(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml166(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml173(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml186(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml193(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml211(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml223(replaceable)
msgid "SECURITY_GROUP_NAME"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml131(replaceable)
msgid "GROUP_DESCRIPTION"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml134(para)
msgid "To delete a specified group, enter the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml138(para)
msgid ""
"You cannot delete the default security group for a project. Also, you cannot"
" delete a security group that is assigned to a running instance."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml149(para)
msgid ""
"Modify security group rules with the <placeholder-1/> commands. Before you "
"begin, source the OpenStack RC file. For details, see <xref "
"linkend=\"cli_openrc\"/>."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml154(para)
msgid "To list the rules for a security group, run the following command:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml159(para)
msgid ""
"To allow SSH access to the instances, choose one of the following options:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml163(para)
msgid ""
"Allow access from all IP addresses, specified as IP subnet "
"<filename>0.0.0.0/0</filename> in CIDR notation:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml169(para)
msgid ""
"Allow access only from IP addresses from other security groups (source "
"groups) to access the specified port:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml173(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml193(replaceable)
#: ./doc/user-guide/section_cli_nova_configure_instances.xml211(replaceable)
msgid "SOURCE_GROUP_NAME"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml178(para)
msgid ""
"To allow pinging of the instances, choose one of the following options:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml182(para)
msgid ""
"Allow pinging from all IP addresses, specified as IP subnet "
"<filename>0.0.0.0/0</filename> in CIDR notation:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml186(para)
msgid "This allows access to all codes and all types of ICMP traffic."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml190(para)
msgid ""
"Allow only members of other security groups (source groups) to ping "
"instances:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml198(para)
msgid ""
"To allow access through a UDP port, such as allowing access to a DNS server "
"that runs on a VM, choose one of the following options:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml203(para)
msgid ""
"Allow UDP access from IP addresses, specified as IP subnet "
"<filename>0.0.0.0/0</filename> in CIDR notation:<placeholder-1/>"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml208(para)
msgid ""
"Allow only IP addresses from other security groups (source groups) to access"
" the specified port:"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml217(title)
msgid "Delete a security group"
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml218(para)
msgid ""
"To delete a security group rule, specify the same arguments that you used to"
" create the rule."
msgstr ""
#: ./doc/user-guide/section_cli_nova_configure_instances.xml221(para)
msgid ""
"For example, to delete the security group rule that permits SSH access from "
"all IP addresses, run the following command."
msgstr ""
#. Put one translator per line, in the form of NAME <EMAIL>, YEAR1, YEAR2
#: ./doc/user-guide/section_cli_nova_configure_instances.xml0(None)
msgid "translator-credits"
msgstr "ਅਮਨਦੀਪ ਸਿੰਘ ਸੈਣੀ <jimidar@gmail.com>"
View Git Blame Copy Permalink