openstack-manuals/doc/install-guide/section_neutron-ovs-controller-node.xml

<?xml version="1.0" encoding="UTF-8"?>
<section xml:id="neutron-controller-node"
  xmlns="http://docbook.org/ns/docbook"
  xmlns:xi="http://www.w3.org/2001/XInclude"
  xmlns:xlink="http://www.w3.org/1999/xlink" version="5.0">
    <title>Configure controller node</title>
    <warning os="rhel;centos">
      <para>By default, the <literal>system-config-firewall</literal>
        automated firewall configuration tool is in place on RHEL.
        This graphical interface (and a curses-style interface with
          <literal>-tui</literal> on the end of the name) enables you
        to configure IP tables as a basic firewall. You should disable
        it when you work with Neutron unless you are familiar with the
        underlying network technologies, as, by default, it blocks
        various types of network traffic that are important to
        Neutron. To disable it, simple launch the program and clear
        the <guilabel>Enabled</guilabel> check box.</para>
      <para>After you successfully set up OpenStack with Neutron, you
        can re-enable and configure the tool. However, during Neutron
        set up, disable the tool to make it easier to debug network
        issues.</para>
    </warning>
    <procedure os="rhel;centos;fedora;opensuse;sles;ubuntu">
      <title>Prerequisites</title>
      <para os="rhel;centos;fedora;opensuse;sles;ubuntu">Before you
        configure individual nodes for Networking, you must create the
        required OpenStack components: user, service, database, and one or
        more endpoints. After you complete these steps on the controller
        node, follow the instructions in this guide to set up OpenStack
        Networking nodes.</para>
      <step os="rhel;centos;fedora;opensuse;sles;ubuntu">
        <para>Connect to the MySQL database as the root user, create the
          <literal>neutron</literal> database, and grant the proper
          access to it:</para>
        <screen><prompt>$</prompt> <userinput>mysql -u root -p</userinput>
<prompt>mysql></prompt> <userinput>CREATE DATABASE neutron;</userinput>
<prompt>mysql></prompt> <userinput>GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'localhost' \
IDENTIFIED BY '<replaceable>NEUTRON_DBPASS</replaceable>';</userinput>
<prompt>mysql></prompt> <userinput>GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'%' \
IDENTIFIED BY '<replaceable>NEUTRON_DBPASS</replaceable>';</userinput></screen>
      </step>
      <step os="rhel;centos;fedora;opensuse;sles;ubuntu">
        <para>Create the required user, service, and endpoint so that
          Networking can interface with the Identity Service.</para>
        <para>Create a <literal>neutron</literal> user:</para>
        <screen><prompt>$</prompt> <userinput>keystone user-create --name=neutron --pass=<replaceable>NEUTRON_PASS</replaceable> --email=<replaceable>neutron@example.com</replaceable></userinput></screen>
        <para>Add the user role to the neutron user:</para>
        <screen><prompt>$</prompt> <userinput>keystone user-role-add --user=neutron --tenant=service --role=admin</userinput></screen>
        <para>Create the neutron service:</para>
        <screen><prompt>$</prompt> <userinput>keystone service-create --name=neutron --type=network \
  --description="OpenStack Networking"</userinput></screen>
        <para>Create a Networking endpoint:</para>
        <screen><prompt>$</prompt> <userinput>keystone endpoint-create \
  --service-id $(keystone service-list | awk '/ network / {print $2}') \
  --publicurl http://<replaceable>controller</replaceable>:9696 \
  --adminurl http://<replaceable>controller</replaceable>:9696 \
  --internalurl http://<replaceable>controller</replaceable>:9696</userinput></screen>
      </step>
    </procedure>
    <procedure>
      <title>Install and configure server component</title>
      <step>
        <para>Install the server component of Networking and any dependencies.</para>
        <screen os="ubuntu;debian"><prompt>#</prompt> <userinput>apt-get install neutron-server</userinput></screen>
        <screen os="fedora;rhel;centos"><prompt>#</prompt> <userinput>yum install openstack-neutron python-neutron python-neutronclient</userinput></screen>
        <screen os="opensuse;sles"><prompt>#</prompt> <userinput>zypper install openstack-neutron python-neutron python-neutronclient</userinput></screen>
      </step>
      <step os="rhel;centos;fedora;opensuse;sles">
        <para>Configure Networking to connect to the database:</para>
        <screen><prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf database connection \
  mysql://neutron:<replaceable>NEUTRON_DBPASS</replaceable>@controller/neutron</userinput></screen>
      </step>
      <step os="ubuntu;debian">
        <para>Configure Networking to use your MySQL database. Edit the
          <filename>/etc/neutron/neutron.conf</filename> file and add the
          following key under the <literal>[database]</literal> section.
          Replace <replaceable>NEUTRON_DBPASS</replaceable> with the password
          you chose for the Neutron database.</para>
        <programlisting language="ini">[database]
...
connection = mysql://neutron:<replaceable>NEUTRON_DBPASS</replaceable>@<replaceable>controller</replaceable>/neutron</programlisting>
      </step>
      <step os="rhel;centos;fedora;opensuse;sles">
        <para>Configure Networking to use
          <systemitem class="service">keystone</systemitem> as the Identity
          Service for authentication:</para>
        <substeps>
          <step>
            <para>Set the <literal>auth_strategy</literal>
              configuration key to <literal>keystone</literal> in the
              <literal>DEFAULT</literal> section of the file:</para>
            <screen><prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT auth_strategy keystone</userinput></screen>
          </step>
          <step>
            <para>Set the <systemitem class="service">neutron</systemitem> configuration for
            <systemitem class="service">keystone</systemitem> authentication:</para>
            <screen><prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf keystone_authtoken \
  auth_uri http://<replaceable>controller</replaceable>:5000</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf keystone_authtoken \
  auth_host <replaceable>controller</replaceable></userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf keystone_authtoken \
  auth_protocol http</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf keystone_authtoken \
  auth_port 35357</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf keystone_authtoken \
  admin_tenant_name service</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf keystone_authtoken \
  admin_user neutron</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf keystone_authtoken \
  admin_password <replaceable>NEUTRON_PASS</replaceable></userinput></screen>
          </step>
        </substeps>
      </step>
      <step os="ubuntu;debian">
        <para>Configure Networking to use
          <systemitem class="service">keystone</systemitem> as the Identity
          Service for authentication.</para>
        <substeps>
          <step>
            <para>Edit the <filename>/etc/neutron/neutron.conf</filename>
              file and add the
              file and add the following key under the
              <literal>[DEFAULT]</literal> section.</para>
            <programlisting language="ini">[DEFAULT]
...
auth_strategy = keystone</programlisting>
            <para>Add the following keys under the
              <literal>[keystone_authtoken]</literal> section. Replace
              <replaceable>NEUTRON_PASS</replaceable> with the password you
              chose for the Neutron user in Keystone.</para>
            <programlisting language="ini">[keystone_authtoken]
...
auth_uri = http://<replaceable>controller</replaceable>:5000
auth_host = <replaceable>controller</replaceable>
auth_protocol = http
auth_port = 35357
admin_tenant_name = service
admin_user = neutron
admin_password = <replaceable>NEUTRON_PASS</replaceable></programlisting>
          </step>
        </substeps>
      </step>
      <step os="opensuse;sles">
        <para>Configure access to the <application>RabbitMQ</application>
          service:</para>
        <screen><prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT \
  rpc_backend neutron.openstack.common.rpc.impl_kombu</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT \
  rabbit_host controller</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT \
  rabbit_userid guest</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT \
  rabbit_password <replaceable>RABBIT_PASS</replaceable></userinput></screen>
      </step>
      <step os="rhel;centos;fedora">
        <para>Configure access to the <application>Qpid</application> message
          queue:</para>
        <screen><prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT \
  rpc_backend neutron.openstack.common.rpc.impl_qpid</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT \
  qpid_hostname <replaceable>controller</replaceable></userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT \
  qpid_port 5672</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT \
  qpid_username <replaceable>guest</replaceable></userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/neutron/neutron.conf DEFAULT \
  qpid_password <replaceable>guest</replaceable></userinput></screen>
      </step>
      <step os="ubuntu;debian">
        <para>Configure Networking to use your message broker. Edit the
          <filename>/etc/neutron/neutron.conf</filename> file and add
          the following keys under the <literal>[DEFAULT]</literal>
          section.</para>
        <para>Replace <replaceable>RABBIT_PASS</replaceable> with the
          password you chose for RabbitMQ.</para>
        <programlisting language="ini">[DEFAULT]
...
rpc_backend = neutron.openstack.common.rpc.impl_kombu
rabbit_host = <replaceable>controller</replaceable>
rabbit_password = <replaceable>RABBIT_PASS</replaceable></programlisting>
      </step>
    </procedure>
    <procedure>
      <title>Install and configure Open vSwitch (OVS) plug-in</title>
      <para>OpenStack Networking supports a variety of plug-ins. For
        simplicity, we chose to cover the most common plug-in, Open
        vSwitch, and configure it to use basic GRE tunnels for tenant
        network traffic.</para>
      <step>
        <para>Install the Open vSwitch plug-in:</para>
        <screen os="ubuntu;debian"><prompt>#</prompt> <userinput>apt-get install neutron-plugin-openvswitch</userinput></screen>
        <screen os="rhel;fedora;centos"><prompt>#</prompt> <userinput>yum install openstack-neutron-openvswitch</userinput></screen>
        <screen os="opensuse;sles"><prompt>#</prompt> <userinput>zypper install openstack-neutron-openvswitch-agent</userinput></screen>
      </step>
      <step>
        <para>You must set some common configuration options no
          matter which networking technology you choose to use
          with Open vSwitch. You must configure Networking core to
          use <acronym>OVS</acronym>. Edit the
          <filename>/etc/neutron/neutron.conf</filename>
          file:</para>
        <programlisting language="ini">core_plugin = neutron.plugins.openvswitch.ovs_neutron_plugin.OVSNeutronPluginV2</programlisting>
        <note>
          <para>The dedicated controller node does not need to run
            Open vSwitch or the Open vSwitch agent.</para>
        </note>
      </step>
      <step>
        <para>Configure the <acronym>OVS</acronym> plug-in to use GRE
          tunneling. Edit the
          <filename>/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini</filename>
          file:</para>
        <programlisting language="ini">[ovs]
tenant_network_type = gre
tunnel_id_ranges = 1:1000
enable_tunneling = True</programlisting>
      </step>
    </procedure>
    <procedure>
      <title>Configure Compute services for Networking</title>
      <step>
        <para os="rhel;centos;fedora;opensuse;sles">Configure Compute to use
          OpenStack Networking services. Configure the
          <filename>/etc/nova/nova.conf</filename> file as per instructions
          below:</para>
        <screen os="rhel;centos;fedora;opensuse;sles"><prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  network_api_class nova.network.neutronv2.api.API</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  neutron_url http://<replaceable>controller</replaceable>:9696</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  neutron_auth_strategy keystone</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  neutron_admin_tenant_name service</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  neutron_admin_username neutron</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  neutron_admin_password <replaceable>NEUTRON_PASS</replaceable></userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  neutron_admin_auth_url http://<replaceable>controller</replaceable>:35357/v2.0</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  linuxnet_interface_driver nova.network.linux_net.LinuxOVSInterfaceDriver</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  firewall_driver nova.virt.firewall.NoopFirewallDriver</userinput>
<prompt>#</prompt> <userinput>openstack-config --set /etc/nova/nova.conf DEFAULT \
  security_group_api neutron</userinput></screen>
        <para os="ubuntu;debian">Configure Compute to use OpenStack Networking
          services. Edit the <filename>/etc/nova/nova.conf</filename>
          file:</para>
        <programlisting language="ini" os="ubuntu;debian">network_api_class=nova.network.neutronv2.api.API
neutron_url=http://<replaceable>controller</replaceable>:9696
neutron_auth_strategy=keystone
neutron_admin_tenant_name=service
neutron_admin_username=neutron
neutron_admin_password=<replaceable>NEUTRON_PASS</replaceable>
neutron_admin_auth_url=http://<replaceable>controller</replaceable>:35357/v2.0
linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver
firewall_driver=nova.virt.firewall.NoopFirewallDriver
security_group_api=neutron</programlisting>
        <note>
          <itemizedlist>
            <listitem>
              <para>Regardless of which firewall driver you chose when you
              configured the network and compute nodes, set this driver
              as the No-Op firewall. This firewall is a
              <systemitem class="service">nova</systemitem> firewall,
              and because  <systemitem class="service">neutron</systemitem>
              handles the Firewall, you must tell
              <systemitem class="service">nova</systemitem> not to use one.</para>
              <para>When Networking handles the firewall, the option
              <code>firewall_driver</code> should be set according to
              the specified plug-in. For example with
              <acronym>OVS</acronym>, edit the
              <filename>/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini</filename>
              file:</para>
              <programlisting language="ini" os="ubuntu;debian">[securitygroup]
# Firewall driver for realizing neutron security group function.
firewall_driver=neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver</programlisting>
              <screen os="rhel;centos;fedora;opensuse;sles"><prompt>#</prompt> <userinput>openstack-config --set \
   /etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini securitygroup firewall_driver \
   neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver</userinput></screen>
            </listitem>
            <listitem>
              <para>If you do not want to use a firewall in Compute or
                Networking, set
                <code>firewall_driver=nova.virt.firewall.NoopFirewallDriver</code>
                in both config files, and comment out or remove
                <code>security_group_api=neutron</code> in the
                <filename>/etc/nova/nova.conf</filename> file, otherwise
                you may encounter <errortext>ERROR: The server has either
                erred or is incapable of performing the requested
                operation. (HTTP 500)</errortext> when issuing
                <command>nova list</command> commands.</para>
            </listitem>
          </itemizedlist>
        </note>
      </step>
      <step os="rhel;centos;fedora">
        <para>The <systemitem class="service">neutron-server</systemitem>
          initialization script expects a symbolic link
          <filename>/etc/neutron/plugin.ini</filename> pointing to the
          configuration file associated with your chosen plug-in. Using
          Open vSwitch, for example, the symbolic link must point to
          <filename>/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini</filename>.
          If this symbolic link does not exist, create it using the
          following commands:</para>
        <screen><prompt>#</prompt> <userinput>cd /etc/neutron</userinput>
<prompt>#</prompt> <userinput>ln -s plugins/openvswitch/ovs_neutron_plugin.ini plugin.ini</userinput></screen>
      </step>
      <step os="sles;opensuse">
        <para>The <systemitem class="service">openstack-neutron</systemitem>
          initialization script expects the variable
          <literal>NEUTRON_PLUGIN_CONF</literal> in file
          <filename>/etc/sysconfig/neutron</filename> to reference the
          configuration file associated with your chosen plug-in. Using
          Open vSwitch, for example, edit the
          <filename>/etc/sysconfig/neutron</filename> file and add the
          following:</para>
        <programlisting>NEUTRON_PLUGIN_CONF="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"</programlisting>
      </step>
    </procedure>
    <procedure>
      <title>Finalize installation</title>
      <step os="ubuntu;debian">
        <para>Restart the Compute and Networking services:</para>
        <screen><prompt>#</prompt> <userinput>service nova-api restart</userinput>
<prompt>#</prompt> <userinput>service nova-scheduler restart</userinput>
<prompt>#</prompt> <userinput>service nova-conductor restart</userinput>
<prompt>#</prompt> <userinput>service neutron-server restart</userinput></screen>
      </step>
      <step os="fedora;rhel;centos;opensuse;sles">
        <para>Restart the Compute services:</para>
        <screen><prompt>#</prompt> <userinput>service openstack-nova-api restart</userinput>
<prompt>#</prompt> <userinput>service openstack-nova-scheduler restart</userinput>
<prompt>#</prompt> <userinput>service openstack-nova-conductor restart</userinput></screen>
      </step>
      <step os="fedora;rhel;centos;opensuse;sles">
        <para>Start the Networking service and configure it to start when the
          system boots:</para>
        <screen os="fedora;rhel;centos"><prompt>#</prompt> <userinput>service neutron-server start</userinput>
<prompt>#</prompt> <userinput>chkconfig neutron-server on</userinput></screen>
        <screen os="opensuse;sles"><prompt>#</prompt> <userinput>service openstack-neutron start</userinput>
<prompt>#</prompt> <userinput>chkconfig openstack-neutron on</userinput></screen>
      </step>
    </procedure>
  </section>